Scribd
Upload
15 views

Arduino

Uploaded by

harivishal.otomatiks
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
15 views

Arduino

Uploaded by

harivishal.otomatiks
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 26

CELEBRATING

Hari Vishal M
What is an Arduino ?
• Open Source electronic prototyping platform based on
flexible easy to use hardware and software.
Arduino Family
The Accessories
A Summary of Arduino power
Who is more popular Atmega or
Arduino?
Bare minimum code

void setup() {
// put your setup code here, to run once:
}

void loop() {
// put your main code here, to run repeatedly:
}
Bare minimum code

• setup : It is called only when the Arduino is powered on or


reset. It is used to initialize variables and pin modes

• loop : The loop functions runs continuously till the device


is powered off. The main logic of the code goes here.
Similar to while (1) for micro-controller programming.
PinMode

• A pin on arduino can be set as input or output by using


pinMode function.

• pinMode(13, OUTPUT); // sets pin 13 as output pin

• pinMode(13, INPUT); // sets pin 13 as input pin


Reading/writing digital values

• digitalWrite(13, LOW); // Makes the output voltage on pin


13 , 0V

• digitalWrite(13, HIGH); // Makes the output voltage on pin


13 , 5V

• int buttonState = digitalRead(2); // reads the value of pin


2 in buttonState
What are Libraries?

• Libraries are a collection of code that makes it easy for


you to connect to a sensor, display, module, etc. For
example, the built-in LiquidCrystal library makes it easy
to talk to character LCD displays. There are hundreds of
additional libraries available on the Internet for
download.
How to use them?
How to use them?
How to use them?
Arduino day
Think Make Share
Single Board Devices
Single Board Devices

• Early microcomputers typically consisted of a half dozen


(or more) circuit boards--plugged into a backplane--that
implemented the central processor unit (CPU), memory,
disk controllers and serial/parallel port functions. These
backplane-based microcomputers were used for data
acquisition, process control and R&D projects, but were
generally too bulky to be used as embedded systems
within devices.
Beagle board BeagleBone BeagleBoard- BeagleBoard
BeagleBone
Family Black xM

AM3358 AM3358 DM3730 OMAP3530


Processor
ARM Cortex-A8 ARM Cortex-A8 ARM Cortex-A8 ARM Cortex-A8

Maximum
1GHz 720MHz 1GHz 720MHz
Processor Speed

DVI-D (via HDMI DVI-D (via HDMI


microHDMI,
Video cape add-ons connectors), S- connectors), S-
cape add-ons
Video Video

microHDMI, 3.5mm stereo 3.5mm stereo


Audio cape add-ons
cape add-ons jack jack

4x UART, 8x
4x UART, 8x PWM, LCD,
PWM, LCD, GPMC, MMC1, McBSP, DSS,
McBSP, DSS,
GPMC, MMC1, 2x SPI, 2x I2C, I2C, UART, LCD,
Supported I2C, UART,
2x SPI, 2x I2C, A/D Converter, McSPI, PWM,
Interfaces McSPI, PWM,
A/D Converter, 2xCAN Bus, 4 JTAG, Camera
JTAG
2xCAN Bus, 4 Timers, FTDI Interface
Timers USB to Serial,
JTAG via USB
Software Compatibilty

• Ångström Linux
• Android
• Ubuntu
• Cloud9 IDE on Node.js w/ BoneScript library
• plus much more
Pandaboard
Pandaboard
Mbed
Any Doubts?

You might also like