Project Information

Project MEJORAMIENTO DE LA AVENIDA INDUSTRIAL

Job No SERVICIOS HIGIENICOS

Company GOBIERNO REGIONAL DE ANCASH

Designer MARCOS APONTE GUANILO

Remarks

Software CSICOL (Version: 8.3 (Rev. 0))

File Name D:\Program Files\Computers and Structures\CSiCol\

SS.HH \SSHH

Working Units Metric (m, Ton, Ton-m, kg/cm^2)

Design Code ACI-318-02

Column:Column3
Basic Design Parameters

Caption = Column3

Default Concrete Strength, Fc = 210 kg/cm^2

Default Concrete Modulus, Ec = 210000 kg/cm^2

Maximum Concrete Strain = 0.003 in/in

Rebar Set = ASTM

Default Rebar Yeild Strength, Fy = 4200 kg/cm^2

Default Rebar Modulus, Es = 2000000 kg/cm^2

Default Cover to Rebars = 12.73 cm

Maximum Steel Strain = Infinity

Transverse Rebar Type = Ties

Total Shapes in Section =1

Consider Slenderness = No

Section Diagram Cross-section Shapes

Shape Width Height Conc Fc S/S Curve Rebars

cm cm kg/cm^2

Rectangular 50.00 25.00 210.00 ACI-Whitney Rectangular 6-#5

Shape

Rebar Properties

Sr.No Designation Area Cord-X Cord-Y Fy S/S Curve

cm^2 cm cm kg/cm^2

1 #5 2.0 3.79 20.31 4200 Elasto-Plastic

2 #5 2.0 3.79 5.33 4200 Elasto-Plastic

3 #5 2.0 25.00 20.31 4200 Elasto-Plastic

4 #5 2.0 25.00 5.33 4200 Elasto-Plastic

5 #5 2.0 44.19 20.31 4200 Elasto-Plastic

6 #5 2.0 44.19 4.77 4200 Elasto-Plastic

+6-#5

Total Area = 11.9 cm^2

Steel Ratio = 0.96 %

Basic Section Properties:

Total Width = 50.00 cm

Total Height = 25.00 cm

Center, Xo = 0.00 cm

Center, Yo = 0.00 cm

X-bar (Right) = 25.00 cm

X-bar (Left) = 25.00 cm

Y-bar (Top) = 12.50 cm

Y-bar (Bot) = 12.50 cm

Transformed Properties:

Base Materail = fc' = 210

kg/cm^2

Area, A = 1,250.0 cm^2

Inertia, Ixx = 6.51E+04 cm^4

Inertia, Iyy = 2.60E+05 cm^4

Inertia, Ixy = 0.00E+00 cm^4

Radius, rx = 7.217 cm
Radius, ry = 14.434 cm

Additional Section Properties:

Transformed Properties:

Base Materail = fc' = 210

kg/cm^2

Modulus, S3(Top) = 5,208.3 cm^3

Modulus, S3(Bot) = 5,208.3 cm^3

Modulus, S2(Left) = 10,416.7 cm^3

Modulus, S2(Right) = 10,416.7 cm^3

Plastic Modulus, Z3 = 8,502.6 cm^3

Plastic Modulus, Z2 = 16,425.4 cm^3

Torsional, J = 183,797.2 cm^4

Shear Area, A3 = 1,033.9 cm^2

Shear Area, A2 = 1,071.4 cm^2

Principal Angle = 0.00E+00 Deg

Inertia, I33' = 2.60E+05 cm^4

Inertia, I22' = 6.51E+04 cm^4

Framing Along-X

Total C/C Length, Lc = 3.500 m

Unsupported Length, Lu = 3.000 m

Framing Type =4

Framing Case =0

K Factor, Braced = 1.00

 Kl/r, Braced = 41.57

K Factor, Unbraced = 1.00

Kl/r, Unbraced = 41.57

Framing Along-Y

Total C/C Length, Lc = 3.500 m

Unsupported Length, Lu = 3.000 m

Framing Type =4

Framing Case =0

K Factor, Braced = 1.00

Kl/r, Braced = 20.78

K Factor, Unbraced = 1.00

Kl/r, Unbraced = 20.78

Final Design Loads

Sr.No Combination Load Pu Mux-Bot Muy-Bot Mux-Top Muy-Top

ton ton-m ton-m ton-m ton-m

1 Combination1 16.30 1.74 -4.58 0.00 0.00

Result Summary

Sr.No Combination Pu (ton) Cap. Ratio- Cap. Ratio- Remarks

Bot Top

1 Combination1 16.30 0.474 0.115 Capacity OK

Moment Magnification Calculations

Combination1- Along X
Bracing Condition = Non-Sway

Non-Sway Part of Loading:

Design Load, Pu = 0.000 ton

Sustained Load, Pud = 0.000 ton

End Moment, M1 = 0.00 ton-m

End Moment, M2 = 0.00 ton-m

Minimum Moment, Mmin = 0.00 ton-m

Design Moment, Mc = 0.00 ton-m

Creep Factor, Bd = 0.00

Section Stiffness, EI For Pcr = 0.00E+00 kg-cm^2

Euler Buckling Load, Pcr = 0.000 ton

Moment Factor, Cm = 0.000

Non-Sway Moment Magnifier = 1.00

Magnified Moment, Mc = 1.74 ton-m

Combination1- Along Y

Bracing Condition = Non-Sway

Non-Sway Part of Loading:

Design Load, Pu = 0.000 ton

Sustained Load, Pud = 0.000 ton

End Moment, M1 = 0.00 ton-m

End Moment, M2 = 0.00 ton-m

Minimum Moment, Mmin = 0.00 ton-m

Design Moment, Mc = 0.00 ton-m

 Creep Factor, Bd = 0.00

Section Stiffness, EI For Pcr = 0.00E+00 kg-cm^2

Euler Buckling Load, Pcr = 0.000 ton

Moment Factor, Cm = 0.000

Non-Sway Moment Magnifier = 1.00

Magnified Moment, Mc = -4.58 ton-m

Column1 - Section View