FIRST QUARTER EXAMINATION

TLE-ICT TECHNICAL DRAFTING GRADE 7

NAME: _______________________________ DATE: ____________ GRADE________ SCORE: _________

GENERAL INSTRUCTIONS: Read all the instructions carefully before answering the questions. All answers
must be written clearly. STRICTLY NO ERASURES.

MULTIPLE CHOICE: Numbers one (1) to fifty (50) are multiple-choice questions designed to assess your
ability to remember, recall, analyze and understand basic and foundational pieces of knowledge
related to your lessons in this subject. Please read each question carefully before reading the answer
options. When you have a clear idea of the question, find the best answer, and write it in the blank
before the number. CAPITAL LETTERS ONLY.

_________ 1. Selecting the wrong tool may _________ the tool itself and harm the user.
A. alter B. break C. crack D. damage

_________ 2. What measuring tool is used to draw circles, arcs, radii, and parts of many symbols?
A. Tape ruler B. Protractor C. Ruler D. Compass.

_________ 3. It is the most popular type of measuring tool. It is usually 6 or 12 inches in length.
A. Tape ruler B. Protractor C. Ruler D. Compass

_________ 4. It is the measuring tool used for measuring and setting of angles.
A. Tape ruler B. Protractor C. Ruler D. Compass

_________ 5. Which of the following is a measuring tool?

A. Drawing board B. Drawing paper C. Sharpener D. Protractor

_________ 6. The main purpose of the scale is to______________.

A. To measure the angle of the object
B. To create a horizontal line
C. To create a circle
D. To reduce or enlarge the dimension of size on the drawing.

_________ 7. What measuring tool will you use in creating a horizontal line?
A. Protractor C. Divider
B. Compass D. T-square

_________ 8. This tool is used to draw circles, arcs, radii, and parts of many symbols.
A. Protractor C. Divider
B. Compass D. T-square

_________ 9. It is used for dividing distances into a number of equal parts by the trial and error method.
A. Protractor B. Compass C. Divider D. T-square

_________ 10. These are used for the purpose of measuring dimensions
A. Cutting tools B. Measuring tools C. Lining Tools D. Testing Tools

_________ 11. It is a concave, spring-steel blade ranging from 1/4" to 1" wide and 6 to about 300 feet
in length.
A. Meter stick B. Tape ruler C. Triangle D. Ruler

_________ 12. Which is the equivalent of 25cm?

A. 10 inches B. 11 inches C. 9.84 inches D. 25 inches

_________ 13. Try this conversion: What is 50 feet?

A. 20.24m B. 15.24m C. 25m D. 14m

1|P age
_________ 14. 10 millimeter is equivalent to __________ inch?
A. 1 B. 2 C. 0.39 D. 0.5

_________ 15. What is the term used as the result of multiplication?

A. sum B. difference C. quotient D. product

_________ 16. What is the sum of 2020 + 1987?

A. 4,007 B. 4087 C. 4020 D. 4200

_________ 17. Product is to multiplication; difference is to __________?

A. subtraction B. multiplication C. division D. addition

_________ 18. Subtrahend is to subtraction; divisor is to __________ ?

A. subtraction B. multiplication C. division D. addition

_________ 19. Find the product of 45x 64?

A. 2099 B. 1987 C. 2020 D. 2880

_________ 20. The inverse of multiplication and is also used to check if the product is correct.
A. Addition B. Division C. Subtraction D. All of the above

_________ 21. In this equation 9-3=6 what number/s is the minuend?

A. 9 B. 3 C. 6 D. 9 and 3

_________ 22. This is a line terminated by arrowheads, indicating the direction and extent of a
dimension:
A. Dimension line B. Extension line C. Arrowhead line D. Center line

_________ 23. These lines represent hidden parts of an object.

A. Solid B. Dimension C. Leader D. Dashed

_________ 24. These lines indicates visible objects, edges or outline of objects.
A. Solid B. Dimension C. Leader D. Dashed

_________ 25. What symbol does this refer to?

A. Window C. Door
B. Ground D. Pole

_________ 26. Traditional drafters need to create several different line widths because______.
A. the line width has to do with how dark it appears in the finished drawing
B. they seem to transmit better in an email.
C. different line widths convey different information
D. it makes no difference

_________ 27. What type of line that projects from an object for the purpose of location a dimension?
A. Dimension line B. Extension line C. Dashed line D. Visible line

_________ 28. These lines are for showing movement or imply direction.
A. Dimension line C. Cutting Plane line
B. Phantom line D. Break line

_________ 29. This shows the appearance of the building and represents the actual form of the
building.
A. Perspective B. Site development plan D. Location plan C. All of the above

2|P age
_________ 30. Which of the following is not part of the architectural sheets needed in a working
drawing?
A. Exterior Perspective C. Floor Plan
B. Site Plan D. Foundation Plan

_________ 31. Which of the following image is a symbol for wood?

A. C.

B. D. A and B

_________ 32. Which of the following image is a symbol for metal?

A. C.

B. D. A only

_________ 33. Which of the following images is a symbol for stone?

A. C.

B. D. All of the above

_________ 34. Is the chance or the probability that a person will be harmed.
A. Hazard B. Risk C. Ergonomics D. None of the above

_________ 35. Is a source of potential damage, harm or adverse health effects.

A. Hazard B. Risk C. Ergonomics D. None of the above

_________ 36. Scratch and wound cause by sharp edges of the drawing table is an example of __.
A. Hazard C. Ergonomics
B. Risk D. None of the above

_________ 37. Below are types of hazards which can put both your health and your safety at risk:
A. Physical hazards C. Biological hazards
B. Chemical hazards D. All of the above

_________ 38. If you round off 76.3456 to its nearest hundreths, the answer will be ____?
A. 76.34 C. 76.36
B. 76.3 D. 76.346
_________ 39. Round off 93.674 to its whole number.
A. 93.7 C. 93
B. 94 D. 93.67
_________ 40. Round off 27.009 into its whole number.
A. 27.09 C. 28
B. 27 D. 26
__________ 41. Round off 4.6245 to its nearest tenths.
A. 4.6 C. 4
B. 4.62 D. 4.7
__________42. Carla was asked to change ¼ fraction into decimal. What would be the correct
answer?
A. 0.025 C. 0.30
B. 0.25 D. 0.02
_________ 43. Carla ate the ¾ of pizza. What will be its equivalent in decimal?
A. 0.25 C. 0.75
B. 0.50 D. 0.05

__________ 44. Carla measured the length of her nail and it was 7/16 inches. What will be its value if
you will convert 7/16 to decimal.
A. .41in C. .43in
B. .42in D. .44in

3|P age
__________ 45. Convert 3/8 to decimal.
A. .36 C. .38
B. .37 D. .39
___________46. Among the tools presented below, which of the following determines the graduations
of the degrees in calculating arcs, angles and circles?
A. compass C. protractor
B. divider D. triangle
__________47.What kind of drawing tools are used to draw vertical lines with triangles as guides?
A. protractor C. triangle
B. ruler D. T- square
__________ 48.How to maintain drafting tools to continue working properly?
A. Clean and separate them into piles of like items
B. Place all the tools together
C. Pile the tools after using
D. Store properly the tools
__________ 49. To prevent cuts due to cutting tools, always cut the material with the direction _____
from your body.
A. away C. going in
B. beside D. straight

_________ 50. Which of the following is a common defect of tools with moving parts?
A. breaking C. loosening
B. alignment D. tightening

4|P age