GENERAL INFORMATION

Features
T 16 series ars highly modular detachable switches, including upper When Assembling the contact block and contact block holder,
base contact block holder and contact block. When disassembling, aiming the rectangular spot on the contact block to the
press the contact block holder in the direction of arrow with “Push by rectangular fixing hole on the contact block holder then push in
manual or a flat”-” screwdriver to disassemble contact block assembly Aiming the white pin of the contact block assembly yo the slot
from upper base. To disassemble contact block from contact block of white pin located on the upper base to assemble the switch
holder, insert the screwdriver in the groove between contact block and
contact block holder, then twist it. Contact block
Contact block
Upper base Press holder Contact block Upper base holder Contact block
Open Open Push Push

Rectangular
Press fixing hole
White pin

Mounting method The lamp terminal for pilot lamp and illuminated
push button switch is in the middle position
Fixed ring which is 90 degrees from other terminals.

Lamp terminal

Location Contact block Contact terminal

Upper base Panel strip assembly

Method of replacing color lens, insert a flat”-” screwdrive The legend plate can be removed by detaching
into the groove of the lens twist it. the lens, and replace the legend you need.
Legend plate
Color lens (film)
Color lens

Upper base

Screwdriver

The space of mounting holes(mm)

(Round, square) pilot lamp, illuminated (Rectangular) pilot lamp, illuminated push button
push button Switch Switch(Square) protection cover

(Round, square, rectangular) selector, key switch Rectangular waterproof cap

(Round, square)waterproof cap
(Rectangular)protection cover
Mushroom head, push-lock push button Switch
 ILLUMINATED PUSH BUTTON SWITCHES/PILOT LAMPS
MODEL DESIGNATION

Designation Signal Description Designation Signal Description

1.Mounting Hole Series 4.Operator
Protection
lluminated Push Button
(Alternate)( ncandescent lamp) (Neon and LED lamp)
lluminated Push Button (Neon and LED lamp)
(Alternate)(LED lamp)
(Neon lamp)
lluminated Push Button 5.Voltage (incandescent and LED lamp)
(Alternate)(Neon lamp)
(incandescent and LED lamp)
lluminated Push Button
(incandescent and LED lamp)
(Momentary)( ncandescent lamp)
(incandescent and LED lamp)
lluminated Push Button
2.Type
(Momentary)(LED lamp) Red

lluminated Push Button Green

(Momentary)(Neon lamp) Yellow
6.Lens Color
Pilot lamp Orange
incandescent lamp)
White
Pilot lamp Blue
(LED lamp)

Pilot lamp
7.Contact
(Neon lamp)
Blocks
Round
3.Shape Square NONE Solder/Plug-in
8.Terminal
Rectangular PC Board
AC/DC: ncandescent lamp； DC: LED lamp

CHARCTERISTICS RATING(CONTACT)
Contact resistance max.(initial) Rated insulation voltage

Insulation resistance min.(at 500VDC) Rated continuous current(A)

1000VAC,50/60 Hz for 1 minute Rated operating current(A)

between non-continous terminals
Dielectric strength 2000VAC,50/60 Hz for 1 minute between
current-carrying part and ground
Voltage Voltage
Mechanical durability:10 to 55Hz
Vibration 1.5 min double amplitude
Mechanical durability:
Approx. 500m/sec (approx.50G’s) AC13/DC13:Inductive load; AC12/DC12:Resistivw load.
Shock
Malfunction durability:
Approx. 500m/sec (approx. 50G’s)

Operating:-25 C to 55 C
CONTACT CONFIGUATION
Ambient perating
temperature Storage:-30 C to 80 C

Humidity

Mechanical Life Momentary:2,000,000

(min) Alternate:250,000

Electrical Life Momentary:100,000(1800 operations/hour)

(min) Alternate:100,000(1200 operations/hour)
 ILLUMINATED PUSH BUTTON SWITCHES/PILOT LAMPS
DIMENSIONS

LAMP DESIGNATION
LAMP TYPE Signal Rated Voltage Signal Operating Voltage Rated Current Color Code Signal Designation

Incandescent None

Red Blue
Green White
Orange

Red
Neon
Green

Designation need to be completed according to signals.

LAMP DESIGNATION ( base)

Incandescent Neon
 PUSH BUTTON SWITCHES

MODEL DESIGNATION

Designation Signal Description

CHARACTERISTICS
1.Mounting Hole Series
Contact resistance max.(initial)
Push Button (Alternate) Insulation min.(at 500VDC)
resistance
Push Button (Momentary)
1000VAC,50/60 Hz for 1 minute
2.Type Push Button (Alternate) Dielectric between non-continous terminals
(Mushroom Head) strength 2000VAC,50/60 Hz for 1 minute between
Push Button (Momentary) current-carrying part and ground
(Mushroom Head)
Mechanical durability:10 to 55Hz
Push-lock Turn-reset Vibration 1.5 min double amplitude

Round Mechanical durability:

2
3.Shape Square Shock Approx. 500m/sec (approx.50G’s)
Malfunction durability:
Rectangular Approx. 500m/sec2(approx. 50G’s)
4.Operator Ambient perating Operating:-25 C to 55 C
Protection temperature Storage:-30 C to 80 C

Red Humidity
Green
Mechanical Life Momentary:2,000,000
Yellow (min) Alternate/BKR:250,000
5.Lens Color Orange
White Electrical Life Momentary:100,000(1800 operations/hour)
(min) Alternate/BKR:100,000(1200 operations/hour)
Blue
Black
DIMENSIONS
6.Contact
Blocks

None Solder/Plug-in
7.Terminal
PC Board

AM/MM/BK Types only available in round shape.

AM/MM Types available in Red, Yellow, Green, Black colors.
BK Types available in Red color.
 SELECTOR SWITCHES/KEY SWITCHES

MODEL DESIGNATION

Designation Signal Description Designation Signal Description

1.Mounting Hole Series 3-Position

Knob Operator
2.Type 3-Position
Key Operator Spring return from right
6.Position
Round 3-Position
3.Shape Square Spring return from left
Rectangular
3-Position
4.Operator 2-Way spring return
Protection
2-Position 3-Position
Red 7.Type of
5.Color Green Contact Blocks
Black Fitted

2-Position Key withdrawable

Key withdrawable
2-Position 2-Position Key withdrawable
Spring return from right 8.Key
withdrawable Key withdrawable
3-Position 3-Position Key withdrawable
6.Position
3-Position
Spring return from right
9.Key NO.
3-Position

3-Position None Solder/Plug-in

10.Terminal
2-Way spring return PC Board

KSR/KSS/KSL Types only available in black colors.

CHARCTERISTICS KEY WITHDRAWBLE

2-Position 3-Position
Contact resistance max.(initial)
Insulation
min.(at 500VDC)
resistance

1000VAC,50/60 Hz for 1 minute 2-Position

between non-continous terminals
Dielectric Key
2000VAC,50/60 Hz for 1 minute between
strength withdrawable
current-carrying part and ground
Position
Mechanical durability:10 to 55Hz
Vibration
1.5 min double amplitude
Mechanical durability: 3-Position
Approx. 500m/sec (approx.50G’s)
Shock Malfunction durability: Key
withdrawable
Approx. 500m/sec (approx. 50G’s)
Position

Ambient perating Operating:-25 C to 55 C

temperature Storage:-30 C to 80 C

Humidity

Mechanical Life 250,000 operations

(min)

Electrical Life 100,000 operations

(min)
Key withdrawable
 SELECTOR SWITCHES/KEY SWITCHES

CONTACT BLOCK POSITIONS

View from back Contact arrangement and operator positions:
2-Position selector switch/Key switch
Contact arrangement
Left

U:Upper contact block Operator

M:Middle contact block position Right
L:Lower contact block

The operating angle range can be changed as

shown below by setting the attached flange 3-Position selector switch/Key switch
shifted by 45 in combination with the contact
Contact arrangement
block. In this case, the minimum mounting
pitch is 26mm because the contact block is Left
shifted by 45 from the flange.

Center
Flange Operator
position
Right
(Standard)

DIMENSIONS
 SERIES ACCESSORIES

DIMENSIONS
Lamp Changer and Wrench TN16-Terminal Cover

TN16-Round/Square Protection Cover Ractangular Protection Cover

Round Head Dust-Tight Cover Square Head Dust-Tight Cover

Ractangular Head Dust-Tight Cover Blanking Plug

 SERIES ACCESSORIES

Please choose the Please choose the

color code for
Round Lens color code for Square Lens
Color Code Color Code
Red Red
Green Green
Yellow Yellow
Orange Orange
White White
Blue Blue

Please choose the Please choose the

Rectangular Lens color code for Mushroom Head color code for
Color Code Color Code
Red Red
Green Green
Yellow Yellow
Orange Blue
White
Blue

Signals for Name Plate

Round Please choose

Name Plate signal for

Square Please choose

Name Plate signal for

Rectangular Please choose

Name Plate signal for
 SERIES ACCESSORIES

Features Model Type Description

Item Signal Designation
Contact Blocks
Holder for Push
Button
Contact Blocks
1.Contact Blocks Holder for
Holder Illuminated Button
Contact Blocks
Contact Blocks Holder for
Assembly SS.KS.BK
Please choose
Signal for
2.Contact Blocks
Fitted
(View from back)
3.Type of Contact None Solder/Plug-in
Holder PC Board Terminal

Contact Blocks
Holder for Push
Button

Contact Blocks
Contact Blocks Please choose Contact Blocks Holder for
Holder Holder Illuminated Button
Signal for Contact Blocks

Contact Blocks
Holder for
SS.KS.BK

None Solder/Plug-in

Contact Blocks Please choose Contact Blocks

Signal for

PC Board Terminal

Blocks