Scribd
Upload
7 views

Stack of Switches

Uploaded by

Kamal Mouhtadi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
7 views

Stack of Switches

Uploaded by

Kamal Mouhtadi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Stack of Two Switches

C1-Internal Use
Configuring Software and Then Connecting Cables, Recommended

I. Configure the stack member ID, stack priority, and stack domain ID on each stack member

Device A

Device B

C1-Internal Use
II. Configure stack ports on stack members
For both switches:

Example of adding two ports

same CMD for the other device, you can specify only the interfaces

III. Check the stack configuration

IV. Save for both devices

❖ Power off devices then power on Device A first after starts, power on Device B , to ensure
DeviceA will become the master device

V. Checking Whether a Stack Is Set Up Successfully

VI. Useful Commands

1) Setting Stack Parameters


✓ Enter the system view, where you can configure the device
system-view
✓ Enter the stack management view
stack

stack member member-id renumber new-member-id


stack member { member-id | all } domain domain-id
stack member { member-id | all } priority priority-value
stack member member-id description description-value

C1-Internal Use
2) Configuring Stack-Ports
✓ Enter the system view, where you can configure the device
system-view
✓ Create a Stack-Port
interface stack-port port-id
• In the Stack-Port view Add member ports to the Stack-Port
port member-group interface { interface-type interface-number1 [ to
interface-type interface-number2 ]

✓ Exit the Stack-Port view


Quit

3) Checking Whether a Stack Is Set Up Successfully


After Connecting Stack Cables and Powering On All Member Devices

✓ Check whether the stack is set up successfully


display stack
✓ Check whether the stack link topology is consistent with the hardware connections and
whether the link status is normal
display stack topology

VII. Bibliographie

➢ https://support.huawei.com/enterprise/en/doc/EDOC1100334225/b560ad1d/example-for-
setting-up-a-stack

➢ https://support.huawei.com/enterprise/en/doc/EDOC1100137947/523f3837/configuration-
examples-for-stacks

C1-Internal Use

You might also like