Scribd
Upload
44 views2 pages

AfriPipes ME - TDS - Entel - 4x18-14mm-Bundled-Duct - 15 - Dec 2020

a

Uploaded by

hans antonio hidalgo mamani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views2 pages

AfriPipes ME - TDS - Entel - 4x18-14mm-Bundled-Duct - 15 - Dec 2020

a

Uploaded by

hans antonio hidalgo mamani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATA-SHEET

HDPE Bundled-duct: 4-way 18/14mm

4-way 18/14mm Square Bundled-duct 4-way 18/14mm Flat Bundled-duct

Application and Features:


• Made with 100% Virgin HDPE
• UV-stabilized Coloured Micro-ducts
• Low-friction permanently lubricated ribbed-inner layer for optimized cable jetting performance

Critical Dimensions:
Product Micro-duct Micro-duct Micro-duct Bundled- Bundled- Sheath
Outer Inner Wall duct width duct height Thickness
Diameter Diameter Thickness (mm) (mm) (mm)
(mm) (mm) (mm)
4-way 18/14mm 18.0 ± 0.1 14.0 ±0.1 2.0 ± 0.1 39.5mm ± 39.5mm ± 1.75±0.2
Square Bundled-duct 0.8mm 0.8mm
4-way 18/14mm Flat 18.0 ± 0.1 14.0 ±0.1 2.0 ± 0.1 75.5mm ± 21.5mm ± 1.75±0.2
Bundled-duct 0.8mm 0.8mm

Colour coding:
Microducts
Duct Colour/RAL Code
1 Blue / RAL 5010
2 Orange/ RAL 2003
3 Green / RAL 6001
4 Brown / RAL 8015

Note: Colors on the ducts can be customized as per customer requirement.

Document No: AFRI-TDS/Bundled-duct/4x18-14/201215/1.1 Page 1 of 2


www.afripipes.com
Date: 15 Dec 2020
TECHNICAL DATA-SHEET
Duct marking:
Printing on the ducts can be customized as per customer requirement.

Standard markings will include:

• ‘’Property of Entel Peru S.A.’’


• Manufacturer name
• Product Description
• Date and time of Manufactured
• Line number
• Manufacturing batch or lot code that is traceable to product manufacturing history
• Sequential Meter Marking

Standard printing pitch is every meter.

(Printing every 1m)

Temperature Range:
Storage - -40 to + 70°C
Operation - -40 to +70°C
Installation - -30 to +50°C

Technical Compliance/Standards:
Melt Flow Index - ISO 1133, @190°C Temp. & 5Kg Load, 0.20 to 1.4
g/10 min.
Density Test - ISO 1183, 0.940 to 0.965 g/cm³
Tensile Performance Test - IEC 60794-5-10/IEC 60794-1-21-E1
Crush Test - IEC 60794-5-10/IEC 60794-1-21-E3
Impact Test - IEC 60794-5-10/IEC 60794-1-21-E4
Bend Test - IEC 60794-5-10/IEC 60794-1-21-E11, ≤20 x D
Heat Reversion Test - ISO 2505, ≤ 3%
Coefficient of Friction Test - @ 450 ° loop and load 5kg, µ ≤ 0.08
Environmental Stress Crack Resistance Test - ASTM D 1693, ≥ 1000 hours
Inner Clearance Test - IEC 60794-5-10/IEC 60794-1-2-E23

Document No: AFRI-TDS/Bundled-duct/4x18-14/201215/1.1 Page 2 of 2


www.afripipes.com
Date: 15 Dec 2020

You might also like