Injection Quill Wake Frequency Calculation as per ASME PTC 19.

INJECTION LINE MAIN LINE (HEADER)

Value udm Value udm

Injection line pressure 4950000 Pa 2 Main line pressure 9.5 Mpa
Injection line temperature 27 °C 1 Main line temperature 19 °C
Flow‐ rate 12.5 kg/h 1 Flow rate 19263 kg/h
Liquid density 1115 kg/mc 1 Flow density 136.4 kg/mc
External diameter 60.32 mm 3 Weight rate 19263 kg/h
Thickness 5.54 mm 3 Density 136.4 kg/mc
Unsupported Length 283 mm 3 External diameter 168.3 mm
Yield stress of IQmaterial 448 Mpa 5 Thickness 10.97 mm
Young modulus of IQmaterial 209000 Mpa 5 Dynamic viscosity 0.0000176 Pas
Density of IQmaterial 8000 kg/mc 1 Type of fluid liquid
IQmaterial A182 F51

OUTPUT DATA OUTPUT DATA

Strouhal Number 0.22 Internal diameter 0.146 m
Flow velocity IQ 0.002 m/s Flow rate area 0.017 m^2
Internal diameter 0.05 m Volumic rate 0.039 mc/s
Volumic ‐rate 0.0000031 mc/s Flow velocity ML V 2.32 m/s
Tip diameter 0.06 m Kinematic viscosity 0.000 m^2/s
Shedding frequency 8.454 Hz
Reynolds number 1136805.45
Nsc (Scruton number) 0.012

FLOW STATIC‐PRESSURE VERIFICATION FLOW STATIC‐PRESSURE VERIFICATION

1. MITCHELL ‐ BELTRAMI EQUATIONS 2. MINER EQUATIONS

THIN WALL CYLINDER ASSUMPTION THIN WALL CYLINDER ASSUMPTION

Dint/thickness 8.89 not applicable Dint/thickness 8.89 not applicable

INTERNAL PRESSURE EFFECTS INTERNAL PRESSURE EFFECTS

Diameter ratio a 0.816312997
Radial stress σR_int ‐4.95 Mpa Hoop stress σϑ_miner 22.00 Mpa
Hoop stress σϑ_int ‐24.72 Mpa Axial stress σA_miner 11.00 Mpa
Equivalent stress σEQ_miner 19.05 Mpa
EXTERNAL PRESSURE EFFECTS Allowable stress σ_all 448 Mpa
Radial stress σR_ext 9.500 Mpa Safety factor µ 23.52
Hoop stress σϑ_ext 47.449 Mpa µ> 2 verified

MAIN EFFECT

Max radial stress σR_max 9.50 Mpa FLOW STATIC‐PRESSURE VERIFICATION

Max hoop stress σϑ_max 47.45 Mpa
2. PRESSURE AND SHEAR STRESS AS PER PAR. 6.11
Equivalent stress σ_eq 43.48 Mpa
Allowable stress σ_all 448.00 Mpa EXTERNAL OPERATING PRESSURE
Safety factor µ 10.30 Radial σ_r 9.50 Mpa
µ > 2 verified Axial stress σ_a 3.17 Mpa
Hoop stress σϑ 47.45 Mpa
AXIAL STRESS EFFECT
Axial stress σ_a 14.84 Mpa Equivalent stress σeq 41.5 Mpa
Equivalent stress σ_eq 35.58 Mpa
Allowable stress σ_all 448 Mpa
Safety factor µ 12.59 Allowable stress 207 Mpa
µ > 2 verified Safety factor µ 4.36
µ> 2 verified
RESONANCE ANALYSIS RESONANCE ANALYSIS with FLUID CONTRIBUTE

Unsupported length L 0.283 m Fluid density inside IQ 1115 kg/mc

External diameter Dext 0.06032 m Area for fluid flow 0.0019043 m^2
Internal diameter Dint 0.04924 m
Inertia I 3.6E‐07 m^4 Mass per unit of length 8.6903714 kg/m
Mass per unit of L m 7.6E+00 kg/m
Young modulus E 2.09E+11 Pa
Natural frequency fa 695.13 Hz Natural frequency fa 651.23 Hz

Root diameter A 0.06032 m

Root diameter A 0.06032 m Filler radius b 0m
Filler radius b 0m

Compliance factor Hc 0.870 par. 6.6.2 Compliance factor Hc 0.8699816

Natural freqency fn_C 604.75 Hz par. 6.6.1 Natural freqency fn_C 566.6 Hz
Coefficient for evaluation 0.4 Coefficient for evaluation 0.4
Resonance verification verified Resonance verification verified

STEADY‐STATE BENDING VERIFICATION DYNAMIC STRESS LIMIT

CD 1.4 point 6.4.2 ofASME 19.3 Magnification factor for transverse lift resonance
Cd 0.1 point 6.4.2 ofASME 19.3 r 0.01
CL 1 point 6.4.2 ofASME 19.3 F_M 1.00

Unsupported Length L 0.283 m Magnification factor for in‐line resonance

External diameter A 0.06032 m r' 0.03
Tip diameter B 0.06032 m F_M' 1.00
Internal diameter d 0.04924 m
In‐line resonance velocity
Gat support point 201.64 par. 6.10.7 V_iR 82.9 m/s par. 6.8.5

Steady‐state drag stress SD 0.10 Mpa par. 6.10.4 Oscillating ‐ drag stress evaluation par. 6.10.6
Smax 11.1 Mpa par. 6.12.1 S_d 9.5 Mpa
Von‐Mises stress 11.8 Mpa par. 6.12.2
Oscillating ‐ lift stress evaluation par. 6.10.5
S allowable 302.4 Mpa par. 6.12.2 S_L 0.07 Mpa

Steady‐state verification verified

default value
Kt 1.1 par. 6.12.4
S_0max 10.4 Mpa par. 6.12.3

F_E 0.7 environmental factor par. 6.12.5

F_T 0.9 temperature factor par. 6.12.6
S_f 32.4 allowable fatigue stress table 6.12.3‐1

Dynamic‐stress verification for 10^11 cycles :

S_0,max 10.4 < 20.4 Mpa verified