International Standards in process

ISO/CD Buildings and constructed assets — Service life

15686-1.2 planning — Part 1: Concepts, Principles and
An International Standard is the result of an agreement between terminology
the member bodies of ISO. A first important step towards an International ISO/CD Buildings and constructed assets — Service life
Standard takes the form of a committee draft (CD) - this is circulated for 15686-2.2 planning — Part 2: Process considerations
study within an ISO technical committee. When consensus has been
ISO/CD Buildings and constructed assets — Service life
reached within the technical committee, the document is sent to the Cen-
15686-3.2 planning — Part 3: Methodologies, data and
tral Secretariat for processing as a draft International Standard (DIS). The
communication
DIS requires approval by at least 75 % of the member bodies casting a vote.
A confirmation vote is subsequently carried out on a final draft Internation- TC 68 Financial services
al Standard (FDIS), the approval criteria remaining the same.
ISO/CD 20022-1 Financial services — Universal financial industry
message scheme — Part 1: Metamodel
ISO/CD 20022-3 Financial services — Universal financial industry
message scheme — Part 3: Modelling
ISO/CD Financial services — Universal financial indus-
20022-4.2 try message scheme — Part 4: XML Schema
generation

CD registered ISO/CD 20022-5 Financial services — Universal financial industry

message scheme — Part 5: Reverse engineering
ISO/CD 20022-7 Financial services — Universal financial industry
message scheme — Part 7: Registration
Period from 01 June to 30 June 2024 ISO/CD 20022-9 Financial services — Universal financial industry
These documents are currently under consideration in the technical message scheme — Part 9: Syntax Generation
committee. Requirements and Rules
They have been registered at the Central Secretariat. TC 79 Light metals and their alloys
ISO/CD 3210 Anodizing of aluminium and its alloys — As-
sessment of quality of sealed anodic oxidation
TC 17 Steel
coatings by measurement of the loss of mass after
ISO/CD 21224 Evaluation of Centerline Segregation of Continu- immersion in acid solution(s)
ously Cast Slabs
TC 84 Devices for administration of medicinal prod-
TC 20 Aircraft and space vehicles ucts and catheters
ISO/CD 18820 Space systems — Specifications for interchange- ISO/CD TS 4452 Specification and demonstration of system reli-
able mid-sized small spacecraft ability of single-use drug delivery systems
ISO/CD 20256.2 Space systems — Space solar cells — Calibration TC 92 Fire safety
procedures
ISO/CD 5925 Fire tests — Smoke-control door and shutter
TC 22 Road vehicles assemblies
ISO/CD Road vehicles — Automotive cables — Part 13: Di- ISO/CD Determination of the resistance to jet fires of
19642-13 mensions and requirements for sheathed, shielded 22899-2.2 passive fire protection — Part 2: Guidance on test
differential pair (SDP), shielded twisted quad (STQ) method selection and implementation methods
and shielded multi-pair cables for high speed data
transmission with a specified analog bandwidth up ISO/CD 13571-1 Life-threatening components of fire — Part 1:
to 4GHz (10 GHz) Guidelines for the estimation of time to compro-
mised tenability and escape capability in fires,
ISO/CD 4106 Motorcycles — Engine test code — Net power Method A
ISO/CD 6460-2 Motorcycles — Measurement method for gaseous ISO/CD 13571-3 Life-threatening components of fire — Part 3:
exhaust emissions and fuel consumption — Part 2: Guidelines for the estimation of time to compro-
Test cycles and specific test conditions mised tenability and escape capability in fires,
ISO/CD TS Road vehicles — Driver readiness and intervention Method B
5283-1 management — Part 1: Partial automation (Level ISO/CD 13571-5 Life-threatening components of fire — Part 5: Heat,
2) smoke obscuration and mass loss models
TC 31 Tyres, rims and valves TC 94 Personal safety -- Personal protective
ISO/CD 18805 Tyre classification — Agricultural, forestry and equipment
construction machines ISO/CD 15384 Protective clothing for firefighters — Laboratory
TC 35 Paints and varnishes test methods and performance requirements for
wildland firefighting clothing
ISO/CD 11998 Paints and varnishes — Determination of wet-
scrub resistance and cleanability of coatings TC 106 Dentistry
TC 42 Photography ISO/CD 23402-1 Dentistry — Portable dental equipment for use in
non‐permanent healthcare environment — Part 1:
ISO/CD 12234-4 Electronic still-picture imaging — Removable General requirements
memory — Part 4: Digital negative format
IEC 80601-2- Medical electrical equipment — Part 2-60: Particu-
TC 43 Acoustics 60:2019/CD lar requirements for the basic safety and essential
ISO 23591:2021/ Acoustic quality criteria for music rehearsal rooms Amd 1 performance of dental equipment — Amendment
CD Amd 1 and spaces — Amendment 1 1

TC 59 Buildings and civil engineering works TC 119 Powder metallurgy

ISO Update, Supplement to ISO Focus -- July 2024 1

 ISO/CD 3953 Metallic powders — Determination of tap density ISO/CD 20271-1 Document management — Reference model for
long-term preservation of text documents — Part
TC 121 Anaesthetic and respiratory equipment 1: Fundamentals
ISO/CD 9360-1 Anaesthetic and respiratory equipment – Heat and
moisture exchangers and breathing system filters
TC 172 Optics and photonics
(HMEF) for humidifying respired gases in humans ISO 8980- Ophthalmic optics — Uncut finished spectacle
— Part 1: Common requirements 3:2022/CD lenses — Part 3: Transmittance specifications and
Amd 1 test methods — Amendment 1
ISO/CD 9360-2 Anaesthetic and respiratory equipment – Heat and
moisture exchangers and breathing system filters ISO/CD 11990 Lasers and laser-related equipment — Determina-
(HMEF) for humidifying respired gases in humans tion of laser resistance of tracheal tube shaft and
— Part 2: Measurement of moisture loss tracheal tube cuffs
ISO/CD 9360-3 Anaesthetic and respiratory equipment – Heat and TC 173 Assistive products
moisture exchangers and breathing system filters
ISO/CD 16840-6 Wheelchair seating — Part 6: Simulated use and
(HMEF) for humidifying respired gases in humans
determination of the changes in properties of seat
— Part 3: Measurement of filtration performance
cushions
ISO/CD TS Alternative test method for heat and moisture
ISO 16840- Wheelchair seating — Part 12: Envelopment and
24172 exchangers
12:2021/DAmd immersion characterization of seat cushions using
ISO/CD 10524-3 Pressure regulators for use with medical gases — 1 a dual semispherical indenter — Amendment 1
Part 3: Pressure regulators integrated with cylinder
ISO 16840- Wheelchair seating — Part 13: Determination of
valves (VIPRs)
13:2021/DAmd the lateral stability property of a seat cushion —
TC 135 Non-destructive testing 1 Amendment 1
ISO/CD 18490 Non-destructive testing — Evaluation of vision ISO/CD 15621 Absorbent incontinence products for urine and/or
acuity of NDT personnel faeces — General guidelines on evaluation
ISO/CD 10878 Non-destructive testing — Infrared thermography ISO/CD 17191 Urine-absorbing aids for incontinence — Measure-
— Vocabulary ment of airborne respirable polyacrylate supera-
bsorbent materials — Determination of dust in
TC 138 Plastics pipes, fittings and valves for the collection cassettes by sodium atomic absorption
transport of fluids spectrometry
ISO/CD 10471 Glass-reinforced thermosetting plastics (GRP) TC 184 Automation systems and integration
pipes — Determination of the long-term ultimate
bending strain and the long-term ultimate relative ISO/CD 23704-4 Reference Model for Cyber-Physically Controlled
ring deflection under wet conditions Smart Machine Tool Systems (CPSMT) — Part 4:
Part 4: Requirements and guidelines for imple-
ISO/CD 24690 Glass reinforced thermosetting plastic (GRP) pipes menting reference architecture of CPSMT for
— Test method for determination of long-term subtractive manufacturing
pressure endurance strength
TC 189 Ceramic tile
ISO/CD TS Assessment of conformity of plastics piping
23818-2 systems for the rehabilitation of existing pipelines ISO/CD 17889-3 Ceramic tiling systems — Sustainability for ceramic
— Part 2: Thermoset composite materials tiles and installation materials — Part 3: Guidelines
for the application and verification of ISO 17889-1
TC 147 Water quality and 17889-2
ISO/CD 9308-2 Water quality — Enumeration of Escherichia coli
TC 195 Building construction machinery and
and coliform bacteria — Part 2: Most probable
number method equipment
ISO/CD 14669 Water quality — Determination of acute lethal tox- ISO/CD 18651-1 Building construction machinery and equipment
icity to marine copepods (Copepoda, Crustacea) — Internal vibrators for concrete — Part 1: Termi-
nology and commercial specifications
TC 150 Implants for surgery
TC 197 Hydrogen technologies
ISO/CD 5832-2 Implants for surgery — Metallic materials — Part 2:
Unalloyed titanium ISO/CD 13984 Liquid Hydrogen Land Vehicle Fueling Protocol

ISO/CD 6631 Tissue-engineered medical products — Quanti- TC 201 Surface chemical analysis
fication of type I collagen from bovine: Liquid chro- ISO/CD 16666.2 Total reflection X-ray fluorescence — Principles
matography- mass spectrometry and definitions
ISO/CD 7614 Tissue-engineered medical products — The TC 204 Intelligent transport systems
method for quantification of remnant DNA in
decellularized ECM scaffolds ISO/CD 6029-2 Intelligent transport systems — Seamless position-
ing for multimodal transportation in ITS stations
TC 159 Ergonomics — Part 2: Nomadic and mobile device dataset for
ISO/CD 22567 General requirements for establishing muscular positioning data fusion
strength databases TC 206 Fine ceramics
ISO/CD 25063.2 Systems and software engineering — Systems and ISO/CD 17138 Fine ceramics (advanced ceramics, advanced
software product Quality Requirements and Evalu- technical ceramics) — Mechanical properties of
ation (SQuaRE) — Common Industry Format (CIF) ceramic composites at room temperature — De-
for usability: Context of use description termination of flexural strength
TC 160 Glass in building ISO/CD 19630 Fine ceramics (advanced ceramics, advanced tech-
ISO/CD 19916-1 Glass in building — Vacuum insulating glass — nical ceramics) — Methods of test for reinforce-
Part 1: Basic specification of products and evalu- ments — Determination of tensile properties of
ation methods for thermal and sound insulating filaments at ambient temperature
performance ISO/CD 24648 Fine ceramics (advanced ceramics, advanced
TC 171 Document management applications technical ceramics) — Mechanical properties of
ceramic composites tube at room temperature —
Determination of diametric compressive C-ring
strength

2 ISO Update, Supplement to ISO Focus -- July 2024

 TC 207 Environmental management ISO/CD 31513 Temperature validation methods of temperature-
controlled storages and road vehicles
ISO/CD 14024 Environmental statements and programmes for
products — Ecolabels TC 328 Engineered stones
ISO/CD 14025 Environmental statement and programmes for ISO/CD 19947 Engineered stone — Terms and definitions
products — Environmental product declarations
TC 333 Lithium
TC 213 Dimensional and geometrical product speci- ISO/CD 7819 Lithium-Vocabulary
fications and verification
TC 336 Laboratory design
ISO/CD 12179 Geometrical product specifications (GPS) —
Surface texture: Profile method — Calibration of ISO/CD 22544 Laboratory design — Terms and definitions
contact (stylus) instruments CASCO Committee on conformity assessment
ISO/CD Geometrical product specifications (GPS) — Sur- ISO/IEC CD Conformity assessment — Requirements for the
25178-71 face texture: Areal — Part 71: Software measure- 17020 operation of various types of bodies performing
ment standards inspection
ISO/CD Geometrical product specification (GPS) — Surface
JTC 1 Information technology
25178-606 texture: Areal — Part 606: Design and characteris-
tics of non-contact (focus variation) instruments ISO/IEC/IEEE CD Systems and software engineering — Life cycle
24748-4.2 management — Part 4: Systems engineering
TC 215 Health informatics planning
ISO/CD TS Health informatics — Accelerating Safe, Effective ISO/IEC/IEEE CD Systems and software engineering — Systems and
5615.2 and Secure Remote Connected Care and Mobile 25070 software Quality Requirements and Evaluation
Health Through Standards-Based Interoperability (SQuaRE) — Quality engineering concepts
Solutions Addressing Gaps Revealed by Pandemics
ISO/IEC/IEEE CD Systems and software engineering — Design
ISO/CD TS Health informatics — Cybersecurity framework for 26516 and development of instructional videos and
6268-2 telehealth environments — Part 2: Cybersecurity animations
reference models of telehealth
ISO/IEC/IEEE CD Systems and software engineering — Develop-
ISO/CD TR Health Informatics — Dynamic on-demand 26517 ment of user assistance in mobile applications
11636.2 virtual private network for health information
infrastructure ISO/IEC/IEEE CD Enterprise, systems and software — Architecture
42024 fundamentals
ISO/CD TR Health informatics — Identification of medicinal
14872 products — Core principles for maintenance of ISO/IEC/IEEE CD Enterprise, systems and software — Reference
identifiers and terms 42042 architectures
ISO/CD TS Health informatics — Conceptual framework for ISO/IEC 18033- Information technology — Security techniques
22789 patient findings and problems in terminologies 2:2006/CD — Encryption algorithms — Part 2: Asymmetric
Amd 2 ciphers — Amendment 2
ISO/CD PAS Health informatics - Guidelines for implementation
24305 of HL7/FHIR based on ISO 13940 and ISO 13606 ISO/IEC CD Information technology — Coded representa-
23090-29 tion of immersive media — Part 29: Video-based
ISO/CD 27799 Health informatics — Information security man- dynamic mesh coding (V-DMC)
agement in health using ISO/IEC 27002
ISO/IEC CD Information technology — Coded representation
TC 219 Floor coverings 23090-30 of immersive media — Part 30: Low latency, low
ISO/CD 4918 Resilient, textile, laminate and modular mechanical complexity LiDAR coding
locked floor coverings — Castor chair test ISO/IEC CD Information technology — Radio frequency identi-
ISO/CD 6356 Textile and laminate floor coverings — Assessment 18000-65 fication for item management — Part 65: Informa-
of static electrical propensity — Walking test tion technology — Radio frequency identification
for item management — Part 65: Parameters for air
ISO/CD 23999 Resilient floor coverings — Determination of interface communications for streaming sensors
dimensional stability and curling (vertical deforma- based on ISO/IEC 18000-63
tion) after exposure to heat
ISO/IEC CD Information technology — User interfaces — Icons
TC 249 Traditional Chinese medicine 20931 for representing services in serviced offices
ISO/CD TS Traditional Chinese medicine — Microscopic ISO/IEC CD TR Information technology – Artificial intelligence –
21310 examination of medicinal herbs 21221 Beneficial AI systems
ISO/CD 21315 Traditional Chinese medicine — Ganoderma luci-
dum fruiting body
TC 260 Human resource management
ISO/CD 30201 Human Resource Management System
— Requirements
TC 269 Railway applications
ISO/CD 19659-4 Railway applications — Heating, ventilation and DIS circulated
air conditioning systems for rolling stock — Part 4:
Basic design parameters, test and inspection items
for the HVAC unit Period from 01 June to 30 June 2024
ISO/CD TR Railway Applications — Principles of train detec- These documents have obtained substantial support within the appropri-
18155 tion for operations and services ate ISO technical committee.
TC 276 Biotechnology They have been submitted to the ISO member bodies for voting by the
ISO/CD 20012.2 Biotechnology — Biobanking — Requirements for date shown.
human natural killer cells derived from pluripotent * Available in English only
stem cells
TC 315 Cold chain logistics

ISO Update, Supplement to ISO Focus -- July 2024 3

 (Revision of ISO 17987-6:2016)
Vote ISO/DIS 17987-7 Road vehicles — Local Interconnect
terminates Network (LIN) — Part 7: Electrical
Physical Layer (EPL) conformance 2024-08-26
test specification
TC 2 Fasteners
(Revision of ISO 17987-7:2016)
ISO/DIS 7040 Fasteners — Prevailing torque
ISO/DIS 34505 Road vehicles — Test scenarios
hexagon nuts — Regular nuts (with
for automated driving systems —
non-metallic insert) 2024-08-28
Scenario evaluation and test case 2024-09-17
generation
(Revision of ISO 7040:2012)
ISO/DIS 7041 Fasteners — Prevailing torque
TC 23 Tractors and machinery for
hexagon nuts — High nuts (with agriculture and forestry
non-metallic insert) 2024-08-29 ISO 6489- Agricultural vehicles — Mechani-
5:2019/DAmd 1 cal connections between towed
(Revision of ISO 7041:2012) and towing vehicles — Part 5: 2024-09-04
ISO/DIS 7042 Fasteners — Prevailing torque Specifications for non-swivel clevis
hexagon nuts — High nuts (all couplings — Amendment 1
metal) 2024-08-29 TC 27 Coal and coke
(Revision of ISO 7042:2012) ISO/DIS 13909-1 Coal and coke — Mechani-
cal sampling — Part 1: General
ISO/DIS 7719 Fasteners — Prevailing torque introduction 2024-08-29
hexagon nuts — Regular nuts (all
metal) 2024-08-29 (Revision of ISO 13909-1:2016)

(Revision of ISO 7719:2012, ISO ISO/DIS 13909-2 Coal and coke — Mechanical sam-
7719:2012/Cor 1:2013) pling — Part 2: Coal — Sampling
from moving streams 2024-08-29
ISO/DIS 7720 Fasteners — Prevailing torque
hexagon nuts — High nuts (all (Revision of ISO 13909-2:2016)
metal) with slot(s) 2024-08-29
ISO/DIS 13909-3 Coal and coke — Mechanical sam-
(Revision of ISO 7720:2012) pling — Part 3: Coal — Sampling
from stationary lots 2024-08-29
ISO/DIS 10511 Fasteners — Prevailing torque
hexagon nuts — Thin nuts (with (Revision of ISO 13909-3:2016)
non-metallic insert) 2024-08-29
ISO/DIS 13909-4 Coal and coke — Mechanical sam-
(Revision of ISO 10511:2012) pling — Part 4: Coal — Preparation
of test samples 2024-08-27
ISO/DIS 10512 Fasteners — Prevailing torque
hexagon nuts — Regular nuts (with (Revision of ISO 13909-4:2016)
non-metallic insert), with fine pitch 2024-08-29
thread ISO/DIS 13909-5 Coal and coke — Mechanical sam-
(Revision of ISO 10512:2012) pling — Part 5: Coke — Sampling
from moving streams 2024-08-28
ISO/DIS 10513 Fasteners — Prevailing torque
hexagon nuts — High nuts (all (Revision of ISO 13909-5:2016)
metal), with fine pitch thread 2024-08-29
ISO/DIS 13909-6 Coal and coke — Mechanical sam-
(Revision of ISO 10513:2012) pling — Part 6: Coke — Preparation
of test samples 2024-08-27
TC 8 Ships and marine technology
ISO/DIS 20679 Ships and marine technology — (Revision of ISO 13909-6:2016)
Marine environment protection ISO/DIS 13909-7 Coal and coke — Mechanical sam-
— Testing ship biofouling in-water 2024-09-17 pling — Part 7: Methods for deter-
cleaning systems mining the precision of sampling, 2024-08-29
ISO/DIS 16259 Ships and marine technology — sample preparation and testing
Performance test procedures of (Revision of ISO 13909-7:2016)
LNG BOG re-liquefaction system on 2024-08-27 ISO/DIS 13909-8 Coal and coke — Mechanical sam-
board a ship pling — Part 8: Methods of testing
TC 20 Aircraft and space vehicles for bias 2024-09-03

ISO/DIS 10785 Space systems — Bellows — De- (Revision of ISO 13909-8:2016)

sign and operation
2024-09-05 TC 28 Petroleum and related prod-
ucts, fuels and lubricants from
(Revision of ISO 10785:2011) natural or synthetic sources
ISO/DIS 10786 Space systems — Structural com- ISO/DIS 13227 Petroleum products and lubricants
ponents and assemblies — Rheological properties of lubri-
2024-09-12 cating greases — Determination 2024-09-04
of flow point using an oscillatory
(Revision of ISO 10786:2011) rheometer with a parallel-plate
measuring system
TC 22 Road vehicles
ISO/DIS 17987-6 Road vehicles — Local Interconnect
Network (LIN) — Part 6: Protocol
conformance test specification 2024-08-26

4 ISO Update, Supplement to ISO Focus -- July 2024

 ISO/DIS 13511 Petroleum products and lubri- ISO/DIS 1382 Rubber — Vocabulary
cants — Rheological properties of
lubricating greases — Determina- 2024-09-03 2024-09-11
tion of the consistency of greases
with metal soap thickener by an (Revision of ISO 1382:2020)
oscillatory rheometer with a cone/
ISO/DIS 1629 Rubber and latices
plate measuring system
— Nomenclature
ISO 12917- Petroleum and liquid petroleum 2024-08-26
1:2017/DAmd 1 products — Calibration of hori-
zontal cylindrical tanks — Part 1: 2024-09-19 (Revision of ISO 1629:2013)
Manual methods — Amendment 1
ISO/DIS 1436 Rubber hoses and hose assemblies
ISO/DIS 11365 Petroleum and related products — Wire-braid-reinforced hydraulic
— Maintenance and use guide types for oil-based or water-based 2024-09-10
for triaryl phosphate ester turbine 2024-09-11 fluids — Specification
control fluids (Revision of ISO 1436:2020)
(Revision of ISO 11365:2017)
ISO/DIS 6502-2 Rubber — Measurement of
ISO/DIS 11366 Petroleum and related products — vulcanization characteristics using
Guidance for in-servicing of steam, curemeters — Part 2: Oscillating 2024-08-29
gas and combined cycle turbines 2024-09-16 disc curemeter
lubricating oils (Revision of ISO 6502-2:2018)
(Revision of ISO/TS 11366:2011)
ISO/DIS 19984-2 Rubber and rubber products —
TC 34 Food products Determination of biobased content
— Part 2: Biobased carbon content 2024-09-13
ISO/DIS 18419 Oilseeds — Application of near
infrared spectrometry
2024-09-05 (Revision of ISO 19984-2:2017)
ISO/DIS 20299-2 Film for wrapping rubber bales —
ISO/DIS 18390 Cereals pulses and cereal products Part 2: Natural rubber and modified
— Sampling — Simplified routine natural rubber 2024-08-30
method 2024-09-04
(Revision of ISO 20299-2:2017)

ISO/DIS 24607 Honey — Specifications TC 46 Information and

documentation
2024-09-16 ISO 30302:2022/ Information and documentation —
DAmd 1 Management systems for records
TC 41 Pulleys and belts (including — Guidelines for implementation 2024-08-30
veebelts) — Amendment 1: Replace wrong
word conformities in the section
ISO/DIS 505 Conveyor belts — Method for the nonconformities and corrective ac-
determination of the tear propaga- tions and including climate change
tion resistance of textile conveyor 2024-08-29 requirements
belts
(Revision of ISO 505:2017) TC 54 Essential oils
ISO/DIS 5284 Conveyor belts — List of equivalent ISO/DIS 24255 Essential oil of clary sage essential
terms oil (<i>Salvia sclarea</i> L.) "prewil-
2024-09-11 ted" French type and "vert broyée" 2024-09-04
French type
(Revision of ISO 5284:1986, ISO TC 59 Buildings and civil engineering
5284:1986/Cor 1:2005) works
TC 43 Acoustics ISO/DIS 23387 Building information modelling
ISO/DIS 1999 Acoustics — Estimation of noise- (BIM) — Data templates for objects
induced hearing loss used in the life cycle of assets 2024-09-09
2024-09-11
(Revision of ISO 23387:2020)
(Revision of ISO 1999:2013) TC 61 Plastics
ISO/DIS 17201-2 Acoustics — Noise from shooting ISO/DIS 10350-1 Plastics — Acquisition and presen-
ranges — Part 2: Calculation of tation of comparable single-point
muzzle blast 2024-09-09 data — Part 1: Moulding materials 2024-09-10

(Revision of ISO 17201-2:2006) (Revision of ISO 10350-1:2017)

ISO/DIS 17201-4 Acoustics — Noise from shooting ISO/DIS 17880 Cellular plastics — Self-supporting
ranges — Part 4: Calculation of metal faced sandwich panels
projectile sound 2024-09-09 2024-09-17

(Revision of ISO 17201-4:2006)

ISO/DIS 12815 Fibre-reinforced plastics — Deter-
TC 44 Welding and allied processes mination of the plain-pin bearing
ISO/DIS 15614-9 Specification and qualification of strength 2024-08-27
welding procedures for metallic
materials — Welding procedure 2024-09-12 (Revision of ISO 12815:2013)
test — Part 9: Underwater hyper- ISO/DIS 12817 Fibre-reinforced plastic compos-
baric wet welding ites — Determination of open-hole
TC 45 Rubber and rubber products compression strength 2024-08-27

ISO Update, Supplement to ISO Focus -- July 2024 5

 (Revision of ISO 12817:2013) ISO/DIS 6590-1 Packaging — Terminology — Part
TC 67 Oil and gas industries including 1: Paper sacks
lower carbon energy 2024-09-09

ISO/DIS 10903 Oil and gas industries including (Revision of ISO 6590-1:1983)
low carbon energy — Pipeline
transportation systems — Pipeline 2024-08-26 TC 126 Tobacco and tobacco products
geohazard monitoring processes, ISO/DIS 21109 Nicotine pouches — Test method
systems and technologies for pH
ISO/DIS 14723 Oil and gas industries including 2024-09-10
lower carbon energy — Pipeline
transportation systems — Subsea 2024-08-29 TC 131 Fluid power systems
pipeline valves
(Revision of ISO 14723:2009) ISO/DIS 18464 Hydraulic fluid power — Design
methodology for energy efficient
TC 68 Financial services systems 2024-09-05
ISO/DIS 9564-5 Financial services — Personal Iden-
tification Number (PIN) manage- TC 135 Non-destructive testing
ment and security — Part 5: Meth- 2024-09-03
ods for the generation, change, and ISO/DIS 16809 Non-destructive testing — Ultra-
verification of PINs using 16-byte sonic thickness determination
block ciphers 2024-09-09

TC 79 Light metals and their alloys (Revision of ISO 16809:2017)

ISO 23515:2022/ Titanium and titanium alloys — ISO/DIS 16828 Non-destructive testing — Ul-
DAmd 1 Designation system — Amend- trasonic testing — Time-of-flight
ment 1 2024-09-11 diffraction technique for detection 2024-09-09
and sizing of discontinuities
TC 93 Starch (including derivatives (Revision of ISO 16828:2012)
and by-products) ISO/DIS 19232-3 Non-destructive testing — Image
ISO/DIS 21921 Oxidized Starch — Specifications quality of radiographs — Part 3:
and test methods Image quality values 2024-09-10
2024-09-10
(Revision of ISO 19232-3:2013)

TC 105 Steel wire ropes TC 136 Furniture

ISO/DIS 4345 Steel wire ropes — Fibre main cores ISO/DIS 4211-1 Furniture — Tests for surface
— Specifications finishes — Part 1: Assessment of
2024-08-30 resistance to cold liquids 2024-09-04

(Revision of ISO 4345:1988) TC 138 Plastics pipes, fittings and

TC 106 Dentistry valves for the transport of fluids
ISO/DIS 18374 Dentistry — Artificial intelligence ISO/DIS 8149 Unplasticized polyamide (PA-U)
(AI) and augmented intelligence pipes — Effect of time and tem-
(AuI) based 2D radiograph analysis 2024-09-19 perature on the expected strength 2024-08-30
— Data generation, data annota-
tion and data processing ISO/DIS 16486-4 Plastics piping systems for the
ISO/DIS 4823 Dentistry — Elastomeric impres- supply of gaseous fuels — Unplas-
sion and bite registration materials ticized polyamide (PA-U) piping 2024-09-05
2024-09-11 systems with fusion jointing and
mechanical jointing — Part 4:
(Revision of ISO 4823:2021) Valves
(Revision of ISO 16486-4:2022)
ISO/DIS 13504 Dentistry — General requirements
for instruments and related ac- TC 145 Graphical symbols
cessories used in dental implant 2024-09-10 ISO 7001:2023/ Graphical symbols — Registered
placement and treatment DAmd 102 public information symbols —
(Revision of ISO 13504:2012) Amendment 102: PI BP 020 Do not 2024-09-02
TC 118 Compressors and pneumatic share food or beverages
tools, machines and equipment ISO 7001:2023/ Graphical symbols — Registered
ISO/DIS 17104 Rotary tools for threaded fasteners DAmd 103 public information symbols —
— Impulse and impulsing tools — Amendment 103: BI PF 084 Hand 2024-09-02
Performance test method 2024-09-09 sanitizer
ISO 7001:2023/ Graphical symbols — Registered
(Revision of ISO/TS 17104:2006) DAmd 104 public information symbols —
Amendment 104: PI BP021 Keep 2024-09-04
TC 121 Anaesthetic and respiratory
windows open
equipment
ISO 7001:2023/ Graphical symbols — Registered
IEC/DIS Medical electrical equipment —
DAmd 105 public information symbols —
80601-2-23 Part 2-23: Particular requirements
Amendment 105: PI TF045 Ride- 2024-09-04
for the basic safety and essential 2024-08-30
share pickup area
performance of transcutane-
ous partial pressure monitoring TC 147 Water quality
equipment
TC 122 Packaging

6 ISO Update, Supplement to ISO Focus -- July 2024

 ISO/DIS 16094-3 Water quality — Analysis of micro- ISO/DIS 17123-6 Optics and optical instruments —
plastic in water — Part 3: Thermo- Field procedures for testing geo-
analytical methods for waters with 2024-09-13 detic and surveying instruments 2024-09-10
low content of suspended solids — Part 6: Rotating lasers
including drinking water (Revision of ISO 17123-6:2022)
ISO/DIS 18724 Water quality — Determination of TC 174 Jewellery and precious metals
dissolved chromium(VI) in water —
ISO/DIS 19376-1 Jewellery and precious metals
Photometric method 2024-08-27
— Vocabulary — Part 1: Precious
metals and units 2024-09-19
(Revision of ISO 11083:1994, ISO
18412:2005, ISO 23913:2006)
ISO/DIS 13165-4 Water quality — Radium-226 — TC 176 Quality management and qual-
Part 4: Test method using alpha ity assurance
spectrometry 2024-08-26 ISO/DIS 54002 Quality management systems -
Guidelines for the application of
ISO/DIS 17244 Water quality — Determination of ISO 9001 in police organizations 2024-09-04
the toxicity of water samples on the
embryo-larval development of Jap- 2024-09-11 TC 181 Safety of toys
anese oyster (<i>Magallana gigas</
i>) and mussel <i>(Mytilus edulis</ ISO 8124- Safety of toys — Part 1: Safety
i> or <i>M. galloprovincialis</i>) 1:2022/DAmd 1 aspects related to mechanical and
(Revision of ISO 17244:2015) physical properties — Amend- 2024-09-17
ment 1
ISO/DIS 17805 Water quality — Sampling, capture
and preservation of environmental TC 194 Biological and clinical evalua-
DNA from water 2024-09-13 tion of medical devices
ISO/DIS 10993-1 Biological evaluation of medical de-
TC 150 Implants for surgery vices — Part 1: Requirements and
general principles for the evalua- 2024-09-16
IEC/DIS Medical electrical equipment — tion of biological safety within a
80601-2-31 Part 2-31: Particular requirements risk management process
for the basic safety and essential 2024-09-20 (Revision of ISO 10993-1:2018)
performance of external cardiac
pacemakers with internal power ISO/DIS 10993-7 Biological evaluation of medical
source devices — Part 7: Ethylene oxide
(Revision of IEC 60601-2-31:2020) sterilization residuals 2024-09-09

TC 156 Corrosion of metals and alloys (Revision of ISO 10993-7:2008,

ISO/DIS 21207 Corrosion tests in artificial atmos- ISO 10993-7:2008/Cor 1:2009, ISO
pheres — Accelerated corrosion 10993-7:2008/Amd 1:2019)
tests involving alternate exposure 2024-08-28 ISO 10993- Biological evaluation of medical
to corrosion-promoting gases, 12:2021/DAmd devices — Part 12: Sample prepara-
neutral salt-spray and drying 1 tion and reference materials — 2024-09-11
(Revision of ISO 21207:2015) Amendment 1
ISO/DIS 26146 Corrosion of metals and alloys ISO/DIS 14155 Clinical investigation of medical de-
— Method for metallographic vices for human subjects — Good
examination of samples after expo- 2024-09-09 clinical practice 2024-09-12
sure to high-temperature corrosive
environments (Revision of ISO 14155:2020)
(Revision of ISO 26146:2012)
TC 195 Building construction machin-
TC 160 Glass in building ery and equipment
ISO/DIS 16293-2 Glass in building — Basic soda lime ISO/DIS 18650-2 Building construction machinery
silicate glass products — Part 2: and equipment — Concrete mixers
Float glass 2024-09-19 — Part 2: Procedure for examina- 2024-09-05
tion of mixing efficiency
(Revision of ISO 16293-2:2017) (Revision of ISO 18650-2:2014)
TC 171 Document management TC 202 Microbeam analysis
applications
ISO/DIS 25498 Microbeam analysis — Analytical
ISO/DIS Document management — Infor- electron microscopy — Selected
4669-2.2 mation classification, marking and area electron diffraction analysis 2024-08-30
handling — Part 2: Functional and 2024-08-13 using a transmission electron
technical requirements for ICMH microscope
solutions (Revision of ISO 25498:2018)
TC 172 Optics and photonics TC 204 Intelligent transport systems
ISO/DIS 10934 Microscopes — Vocabulary for light ISO/DIS 7856 Intelligent transport systems —
microscopy Remote support for low speed
2024-09-03 automated driving systems (RS- 2024-09-10
LSADS) — Performance require-
(Revision of ISO 10934:2020) ments, system requirements and
ISO/DIS 18221 Microscopes — Microscopes with performance test procedures
digital imaging displays — Informa- TC 209 Cleanrooms and associated
tion provided to the user regarding 2024-08-29
controlled environments
imaging performance
(Revision of ISO 18221:2016)

ISO Update, Supplement to ISO Focus -- July 2024 7

 ISO/DIS 14644-5 Cleanrooms and associated TC 265 Carbon dioxide capture,
controlled environments — Part 5: transportation, and geological
Operations 2024-09-09 storage
(Revision of ISO 14644-5:2004) ISO/DIS 27927 Carbon dioxide capture — Key
performance parameters and char-
TC 211 Geographic information/ acterization methods of absorption 2024-08-27
Geomatics liquids for post-combustion CO2
ISO/DIS 19109 Geographic information — General capture
feature model and rules for applica- TC 281 Fine bubble technology
tion schema 2024-09-11
ISO/DIS 23016-1 Fine bubble technology — Agri-
(Revision of ISO 19109:2015) cultural applications — Part 1: Test
method for evaluating the growth 2024-09-16
ISO/DIS 19152-5 Geographic information — Land promotion of hydroponically
Administration Domain Model grown lettuce
(LADM) — Part 5: Spatial plan 2024-09-11 (Revision of ISO/TS 23016-1:2019)
information
(Revision of ISO 19152:2012) TC 309 Governance of organizations
TC 219 Floor coverings ISO/DIS 37302 Compliance management systems
— Guidelines for the evaluation of
ISO/DIS 10833 Textile floor coverings — Deter- effectiveness 2024-08-27
mination of resistance to damage
at cut edges using the modified 2024-09-19
Vettermann drum test ISO/DIS 37303 Compliance management systems
— Guidelines for competence
(Revision of ISO 10833:2017)
management 2024-08-29
TC 220 Cryogenic vessels
ISO/DIS 21009-1 Cryogenic vessels — Static IULTCS International Union of Leather
vacuum-insulated vessels — Part Technologists and Chemists
1: Design, fabrication, inspection 2024-08-29 Societies
and tests
(Revision of ISO 21009-1:2022) ISO/DIS 7979 Leather – Tests for colour fastness
– Colour fastness to hydroalcoholic
ISO/DIS 24490 Cryogenic vessels — Centrifugal mixtures 2024-09-06
pumps for cryogenic service
2024-08-26
JTC 1 Information technology
(Revision of ISO 24490:2016) ISO/IEC DIS Information Technology — 3D
TC 221 Geosynthetics 16466 Printing and scanning — Assess-
ment methods of 3D scanned data 2024-09-02
ISO/DIS 12236 Geosynthetics — Static puncture for 3D printing model
test (CBR test)
2024-08-27 ISO/IEC DIS Information technology — AT
17760-302 Attachment — Part 302: Zoned De-
(Revision of ISO 12236:2006) vice ATA Command Set-2-(ZAC-2) 2024-09-04

TC 224 Drinking water, wastewater

ISO/IEC 9594- Information technology — Open
and stormwater systems and
2:2020/DAmd 2 systems interconnection — Part 2:
services The Directory: Models — Amend- 2024-08-26
ISO/DIS 24521 Drinking water, wastewater and ment 2
stormwater systems and services ISO/IEC 18014- Information technology — Secu-
— Guidelines for the management 2024-09-19 1:2008/DAmd 1 rity techniques — Time-stamping
of basic on-site domestic wastewa- services — Part 1: Framework — 2024-09-13
ter services Amendment 1
(Revision of ISO 24521:2016)
ISO/IEC 23008- Information technology — High ef-
ISO/DIS 24566-3 Drinking water, wastewater and 1:2023/DAmd 1 ficiency coding and media delivery
storm water systems and services in heterogeneous environments 2024-09-04
— Adaptation of water services to 2024-08-27 — Part 1: MPEG media transport
climate change impacts — Part 3: (MMT) — Amendment 1: Signalling
Drinking Water services of adaptive FEC scheme
ISO/DIS 24566-4 Drinking water, wastewater and ISO/IEC DIS Information technology — Coded
storm water systems and services 23090-26 representation of immersive
— Adaptation of water services to 2024-08-27 media — Part 26: Conformance 2024-08-27
climate change impacts — Part 4: and reference software for carriage
Wastewater services of geometry-based point cloud
TC 232 Education and learning services compression data

ISO/DIS 21001 Educational organizations — Man- ISO/IEC DIS Information technology — Com-
agement systems for educational 19785-3 mon Biometric Exchange Formats
organizations — Requirements 2024-08-27 Framework — Part 3: Patron format 2024-09-13
with guidance for use specifications
(Revision of ISO 21001:2018) (Revision of ISO/IEC 19785-3:2020)

TC 261 Additive manufacturing ISO/IEC DIS Information technology — Com-

19785-4 mon Biometric Exchange Formats
ISO/ASTM DIS Additive manufacturing of metals Framework — Part 4: Security block 2024-09-13
52937 — Qualification principles — Tasks format specifications
and related skills for AM 2024-09-09

8 ISO Update, Supplement to ISO Focus -- July 2024

 (Revision of ISO/IEC 19785-4:2010, ISO/FDIS 17981 Space systems — Cube satellite
ISO/IEC 19785-4:2010/Cor 1:2013) (CubeSat) interface
2024-08-09

TC 22 Road vehicles
ISO 24089:2023/ Road vehicles — Software update
Amd 1 engineering — Amendment 1

FDIS circulated ISO/FDIS 24581 Road vehicles — General require-

ments and test methods of in-
vehicle optical harnesses for up to 2024-08-15
100 Gbit/s communication
Period from 01 June to 30 June 2024
ISO/FDIS 9815 Road vehicles — Passenger-car
These Final draft International Standards have been submitted to the ISO and trailer combinations — Lateral
member bodies for formal approval by the date shown stability test 2024-08-13
* Available in English only
(Revision of ISO 9815:2010)
ISO 13948-2 Diesel engines — Fuel injection
Vote pumps and fuel injector low-pres-
terminates sure connections — Part 2: Non-
threaded (push-on) connections
(Revision of ISO 13948-2:2016)
TC 4 Rolling bearings
ISO/FDIS 24650 Road vehicles — Sensors for
ISO/FDIS 3643 Rolling bearings — Ceramic rolling automated driving under adverse
elements — Terms and characteris- weather conditions — Assessment 2024-08-09
tics of surface imperfections 2024-08-05 of the cleaning system efficiency
TC 23 Tractors and machinery for
TC 5 Ferrous metal pipes and metal- agriculture and forestry
lic fittings
ISO/FDIS 11784 Radio frequency identification of
ISO/DTR 7035-2 Design and asset management of animals — Code structure
DIP for water application — Part 2: 2024-08-06
Design, installation and operation 2024-08-23
(Revision of ISO 11784:1996, ISO
TC 17 Steel 11784:1996/Amd 1:2004, ISO
11784:1996/Amd 2:2010)
ISO/FDIS 9658 Steel — Determination of alu-
minium content — Flame atomic TC 24 Particle characterization includ-
absorption spectrometric method 2024-08-15 ing sieving
ISO/FDIS Determination of particle size
(Revision of ISO 9658:1990) 13318-1 distribution by centrifugal liquid
ISO/FDIS 642 Steel — Hardenability test by end sedimentation methods — Part 1: 2024-08-15
quenching (Jominy test) General principles, requirements
2024-07-30 and guidance
(Revision of ISO 13318-1:2001)
(Revision of ISO 642:1999) ISO/FDIS 19996 Charge conditioning of aerosol par-
ISO/FDIS 643 Steels — Micrographic determina- ticles for particle characterization
tion of the apparent grain size and the generation of calibration 2024-08-19
2024-08-01 and test aerosols
TC 27 Coal and coke
(Revision of ISO 643:2019)
ISO/FDIS 924 Coal preparation plant — Principles
ISO/FDIS Calculation method of carbon and conventions for flowsheets
14404-1 dioxide emission intensity from 2024-08-05
iron and steel production — Part 1: 2024-08-16
Steel plant with blast furnace (Revision of ISO 924:1989)
(Revision of ISO 14404-1:2013)
ISO/FDIS 8858-2 Coal — Froth flotation testing —
ISO/FDIS Calculation method of carbon Part 2: Sequential evaluation
14404-2 dioxide emission intensity from 2024-08-06
iron and steel production — Part 2: 2024-08-16
Steel plant with electric arc furnace (Revision of ISO 8858-2:2004)
(EAF)
(Revision of ISO 14404-2:2013) ISO/FDIS 562 Hard coal and coke — Determina-
tion of volatile matter
ISO/FDIS Calculation method of carbon 2024-08-01
14404-3 dioxide emission intensity from
iron and steel production — Part 3: 2024-08-16 (Revision of ISO 562:2010)
Steel plant with electric arc furnace
(EAF) and coal-based or gas-based TC 28 Petroleum and related prod-
direct reduction iron (DRI) facility ucts, fuels and lubricants from
(Revision of ISO 14404-3:2017) natural or synthetic sources
TC 20 Aircraft and space vehicles ISO/FDIS 3987 Petroleum products — Determina-
tion of sulfated ash in lubricating
oils and additives and fatty acid 2024-07-30
methyl esters

ISO Update, Supplement to ISO Focus -- July 2024 9

 (Revision of ISO 3987:2010, ISO ISO/FDIS 17396 Synchronous belt drives — Metric
3987:2010/Cor 1:2011) pitch — Tooth profiles T and AT
ISO/FDIS 4266-5 Petroleum and liquid petroleum endless and open ended belts and 2024-08-05
products — Measurement of level pulleys
and temperature in storage tanks 2024-08-07 (Revision of ISO 17396:2017)
by automatic methods — Part 5:
Measurement of temperature in
TC 43 Acoustics
marine vessels ISO/FDIS 7447 Underwater acoustics — Meas-
(Revision of ISO 4266-5:2002) urement of radiated underwater
sound from percussive pile driving 2024-08-08
TC 30 Measurement of fluid flow in — In-situ determination of the
closed conduits insertion loss of barrier control
ISO/FDIS 4064-1 Water meters for cold potable wa- measures underwater
ter and hot water — Part 1: Metro- TC 44 Welding and allied processes
logical and technical requirements 2024-08-22
ISO/PRF Soft soldering fluxes — Test
(Revision of ISO 4064-1:2014) 9455-18 methods — Part 18: Cleanliness of
soldered printed circuit assemblies
ISO/FDIS 4064-2 Water meters for cold potable before and/or after cleaning
water and hot water — Part 2: Test
methods 2024-08-22 TC 45 Rubber and rubber products
ISO/DTS 20444 Rubber and plastics hoses — Deter-
(Revision of ISO 4064-2:2014) mination of abrasion resistance of
TC 31 Tyres, rims and valves the outer cover 2024-08-19

ISO/PRF 10571 Tyres for mobile cranes and similar

specialized machines ISO 4649 Rubber, vulcanized or thermoplas-
tic — Determination of abrasion
(Revision of ISO 10571:2016) resistance using a rotating cylindri-
cal drum device
TC 34 Food products (Revision of ISO 4649:2017)
ISO/FDIS 712-2 Cereals and cereal products — ISO/FDIS 2411 Rubber- or plastics-coated fabrics
Determination of moisture content — Determination of coating
— Part 2: Automatic drying oven 2024-08-13 adhesion 2024-08-14
method
ISO/PRF 7102 Infant formula — Determination of (Revision of ISO 2411:2017)
β-galactooligosaccharides — Ultra ISO/DTS 5462 Rubber latex coated fabric gloves
high performance liquid chroma- — Specification
tography (UHPLC) with fluores- 2024-08-02
cence detection after pre-column
derivatization
ISO/PRF 7617-1 Plastics-coated fabrics for uphol-
ISO/FDIS 17174 Molecular biomarker analysis stery — Part 1: Specification for
— DNA barcoding of fish and PVC-coated knitted fabrics
fish products using defined 2024-08-06 (Revision of ISO 7617-1:2001)
mitochondrial cytochrome b
and cytochrome c oxidase I gene ISO/FDIS Elastomeric seismic-protection
segments 22762-1 isolators — Part 1: Test methods
2024-08-22
TC 37 Language and terminology
ISO 24617-10 Language resource management (Revision of ISO 22762-1:2018)
— Semantic annotation frame- ISO/FDIS Elastomeric seismic-protection
work (SemAF) — Part 10: Visual 22762-2 isolators — Part 2: Applications for
information bridges — Specifications 2024-08-22
ISO/DTS 6253.2 Requirements and recommenda-
tions for training programmes in (Revision of ISO 22762-2:2018)
community interpreting 2024-08-08 ISO/FDIS Elastomeric seismic-protection
22762-3 isolators — Part 3: Applications for
TC 38 Textiles buildings — Specifications 2024-08-22

ISO/FDIS 12834 Textiles — Synthetic filament yarns (Revision of ISO 22762-3:2018)

— Determination of dynamic ther-
mal draw-force of partially oriented 2024-08-02 TC 46 Information and
yarns (POY) documentation
ISO/FDIS 7211-2 Textiles — Methods for analysis of ISO/FDIS 27729 Information and documentation
woven fabrics construction — Part — International standard name
2: Determination of number of 2024-08-02 identifier (ISNI) 2024-08-15
threads per unit length
(Revision of ISO 7211-2:1984) (Revision of ISO 27729:2012, ISO
27729:2012/Cor 1:2013)
TC 41 Pulleys and belts (including
veebelts) ISO/FDIS 11799 Information and documentation —
Document storage requirements
ISO/FDIS 18573 Conveyor belts — Test atmos- for archive and library materials 2024-08-09
pheres and conditioning periods
2024-08-05 (Revision of ISO 11799:2015)
(Revision of ISO 18573:2012) TC 54 Essential oils

10 ISO Update, Supplement to ISO Focus -- July 2024

 ISO/FDIS 14714 Essential oils and aromatic extracts ISO/FDIS Stationary training equipment —
— Determination of benzene 20957-2 Part 2: Strength training equip-
content 2024-08-09 ment — Additional specific safety 2024-08-13
requirements and test methods
(Revision of ISO 14714:1998) (Revision of ISO 20957-2:2020)
TC 58 Gas cylinders ISO/FDIS Stationary training equipment —
20957-7 Part 7: Rowing equipment — Addi-
ISO 14245:2021/ Gas cylinders — Specifications and
tional specific safety requirements 2024-08-13
FDAmd 1 testing of LPG cylinder valves —
and test methods
Self-closing — Amendment 1 2024-08-02
(Revision of ISO 20957-7:2020)

ISO 15995:2021/ Gas cylinders — Specifications TC 86 Refrigeration and

FDAmd 1 and testing of LPG cylinder valves air-conditioning
— Manually operated — Amend- 2024-08-02 ISO/FDIS 24664 Refrigerating systems and heat
ment 1 pumps — Pressure relief devices
TC 59 Buildings and civil engineering and their associated piping — 2024-08-16
Methods for calculation
works
ISO/FDIS 4931-1 Buildings and civil engineering
TC 94 Personal safety -- Personal
works — Principles, framework protective equipment
and guidance for resilience design 2024-08-22 ISO/FDIS 13997 Protective clothing — Mechanical
— Part 1: Adaptation to climate properties — Determination of re-
change sistance to cutting by sharp objects 2024-09-18
TC 60 Gears
(Revision of ISO 13997:2023)
ISO/DTR Calculation of load capacity of
10300-30.2 bevel gears — Part 30: ISO rating TC 110 Industrial trucks
system for bevel and hypoid gears 2024-07-22 ISO/FDIS Rough-terrain trucks — Safety
— Sample calculations 10896-8 requirements and verification —
(Revision of ISO/TR 10300-30:2017) Part 8: Requirements for trucks 2024-08-22
TC 61 Plastics designed for towing

ISO/DTS 5733 Plastics — Test method of exposure TC 121 Anaesthetic and respiratory
to white LED lamps equipment
2024-08-08 ISO 19211 Anaesthetic and respiratory equip-
ment — Fire-activated oxygen
TC 67 Oil and gas industries including shut-off devices for use during
lower carbon energy oxygen therapy

ISO/DTS 20790 Oil and gas industries including IEC 80601-2- Medical electrical equipment —
lower carbon energy — Guidelines 49:2018/FDAmd Part 2-49: Particular requirements
for green manufacturing and lower 2024-08-01 1 for the basic safety and essential 2024-08-16
carbon emission of oil and gas-field performance of multifunction
equipment and materials patient monitoring equipment —
Amendment 1
ISO/FDIS Oil and gas industries including
23936-4 lower carbon energy — Non-metal- TC 122 Packaging
lic materials in contact with media 2024-08-07 ISO/FDIS 6608-1 Active and intelligent packaging —
related to oil and gas production — Part 1: General requirements and
Part 4: Fiber-reinforced composite specifications of active packaging 2024-08-09
materials
ISO/FDIS Oil and gas industries including TC 135 Non-destructive testing
10426-5 lower carbon energy — Cements
and materials for well cementing — 2024-08-21 ISO/FDIS Non-destructive testing — Char-
Part 5: Determination of shrinkage 18563-2 acterization and verification of
and expansion of well cement ultrasonic phased array equipment 2024-08-21
formulations — Part 2: Array probes
(Revision of ISO 10426-5:2004) (Revision of ISO 18563-2:2017)

TC 76 Transfusion, infusion and TC 146 Air quality

injection, and blood process- ISO/PRF 12141 Stationary source emissions —
ing equipment for medical and Determination of low range mass
pharmaceutical use concentration of dust — Manual
gravimetric method
ISO/FDIS Infusion equipment for medical (Revision of ISO 12141:2002)
8536-13 use — Part 13: Graduated flow
regulators for single use with fluid 2024-08-19 TC 147 Water quality
contact ISO/FDIS 4702 Water quality — Zirconium 93 —
(Revision of ISO 8536-13:2016) Test method using ICP-MS
TC 79 Light metals and their alloys 2024-08-13

ISO/PRF 28401 Light metals and their alloys —

Titanium and titanium alloys ISO/FDIS 4717 Water quality — Protactinium-231
— Vocabulary — Test method using ICP-MS
(Revision of ISO 28401:2010) 2024-08-13

TC 83 Sports and other recreational

facilities and equipment

ISO Update, Supplement to ISO Focus -- July 2024 11

 ISO/FDIS 4721 Water quality — Strontium 90 — ISO/PRF Intelligent transport systems —
Test method using ICP-MS 17438-3 Indoor navigation for personal
2024-08-13 and vehicle ITS stations — Part 3:
Requirements and specification for
indoor positioning reference data
ISO/FDIS 4722-2 Water quality — Thorium 232 —
Part 2: Test method using ICP/MS TC 207 Environmental management
2024-08-13
ISO/FDIS 59014 Environmental management and
circular economy — Sustainability
ISO/FDIS Water quality — Radium-226 and traceability of the recovery of 2024-08-14
13165-3 — Part 3: Test method using secondary materials — Principles,
coprecipitation and gamma-ray 2024-08-13 requirements and guidance
spectrometry
(Revision of ISO 13165-3:2016)
TC 210 Quality management and cor-
responding general aspects for
TC 159 Ergonomics products with a health purpose
ISO/DTS Ergonomics methods — Part 1: including medical devices
16710-1 Feedback method — A method to ISO/FDIS Small-bore connectors for liquids
understand how end users perform 2024-08-21 80369-20 and gases in healthcare applica-
their work with machines tions — Part 20: Common test 2024-08-08
TC 163 Thermal performance and methods
energy use in the built (Revision of ISO 80369-20:2015)
environment TC 211 Geographic information/
ISO/DTR Energy performance of buildings Geomatics
52016-4 — Energy needs for heating and ISO/FDIS 19103 Geographic information — Con-
cooling, internal temperatures and 2024-09-03 ceptual schema language
sensible and latent heat loads — 2024-08-14
Part 4: Explanation and justification
of ISO 52016-3 (Revision of ISO 19103:2015)
TC 184 Automation systems and TC 213 Dimensional and geometrical
integration product specifications and
ISO/DPAS 8329 Extended master connection file verification
(χMCF) — Description of me-
ISO/FDIS 5463 Geometrical product specifications
chanical connections and joints in 2024-08-05
(GPS) — Rotary axis form-meas-
structural systems
uring instruments — Design and 2024-08-06
TC 190 Soil quality metrological characteristics
ISO/FDIS 24212 Remediation techniques applied at TC 215 Health informatics
contaminated sites
ISO/DTS 6204 Health Informatics — Categorial
2024-08-14
structures for representation of
Ayurvedic medicinal water — De- 2024-08-16
TC 195 Building construction machin- cocting process in Ayurveda
ery and equipment TC 221 Geosynthetics
ISO 6085:2023/ Building construction machinery ISO/FDIS 10319 Geosynthetics — Wide-width
Amd 1 and equipment — Self-loading tensile test
mobile concrete mixers — Safety 2024-08-22
requirements and verification
— Amendment 1: Vertical test (Revision of ISO 10319:2015)
object height for the visibility
measurements TC 229 Nanotechnologies
TC 201 Surface chemical analysis ISO/DTS 13329 Nanomaterials — Preparation of
safety data sheets (SDS)
ISO/FDIS Surface chemical analysis — 2024-08-21
20579-1 Sample handling, preparation and
mounting — Part 1: Documenting 2024-08-15
(Revision of ISO/TR 13329:2012)
and reporting the handling of
specimens prior to analysis TC 262 Risk management
(Revision of ISO 18117:2009) ISO/FDIS 31031 Managing risk for youth and school
TC 204 Intelligent transport systems trips
2024-08-09
ISO 14813-1 Intelligent transport systems —
Reference model architecture(s)
for the ITS sector — Part 1: ITS TC 265 Carbon dioxide capture,
service domains, service groups transportation, and geological
and services storage
(Revision of ISO 14813-1:2015)
ISO/FDIS 27913 Carbon dioxide capture, transpor-
ISO/PRF Intelligent transport systems — tation and geological storage —
17438-2 Indoor navigation for personal Pipeline transportation systems 2024-08-06
and vehicle ITS stations — Part 2:
Requirements and specification for (Revision of ISO 27913:2016)
indoor maps
TC 268 Sustainable cities and
communities

12 ISO Update, Supplement to ISO Focus -- July 2024

 ISO/PRF 37151 Smart community infrastructures ISO/IEC FDIS Information technology — Coded
— Principles and requirements for 23090-22 representation of immersive media
performance metrics — Part 22: Conformance for G-PCC 2024-08-20
(Revision of ISO/TS 37151:2015)
ISO 37153 Smart community infrastructures ISO/IEC 18004 Information technology — Au-
— Maturity model for assessment tomatic identification and data
and improvement capture techniques — QR code bar
(Revision of ISO 37153:2017) code symbology specification
(Revision of ISO/IEC 18004:2015)
ISO 37176 Smart community infrastructure
— Responsiveness assessment and ISO/IEC DTS Information technology — Artifi-
maturity model 12791.2 cial intelligence — Treatment of
unwanted bias in classification and 2024-09-11
TC 279 Innovation management regression machine learning tasks
ISO/FDIS 56001 Innovation management system
— Requirements
2024-07-31

JTC 1 Information technology

ISO/IEC 24079 Information technology — Net-
work Controller Sideband Interface
(NC-SI) Specifications Collection
ISO/IEC/IEEE Telecommunications and informa- Standards published
FDIS 8802-15-9 tion exchange between systems
— Local and metropolitan area net- 2024-11-08
works specific requirements — Part
New International Standards published between 01 June and 30 June
15-9: Transport of Key Management
2024
Protocol (KMP) Datagrams
ISO/IEC FDIS Information technology — Tel-
1 delayed publication of language version
19369 ecommunications and information
2 corrected version
exchange between systems — 2024-08-14
3 multilingual document
NFCIP-2 test methods
(Revision of ISO/IEC 19369:2014)
ISO/IEC DTS Personal identification — ISO- Price
18013-7 compliant driving licence — Part group
7: Mobile driving licence (mDL) 2024-07-30
add-on functions
CIE International Commission on
ISO/IEC FDIS Programming languages — Avoid-
24772-1 ing vulnerabilities in programming Illumination
languages — Part 1: Language- 2024-08-14 ISO/CIE fr Colorimetry — Part 5: CIE 1976 L*u*v*
independent catalogue of 11664-5:2024 en colour space and u', v' uniform chroma-
vulnerabilities ticity scale diagram B
(Revision of ISO/IEC TR
24772-1:2019)
TC 2 Fasteners
ISO/IEC FDIS Cybersecurity — Information and
ISO 4766:2024 fr Fasteners — Slotted set screws with flat
27031 communication technology readi-
en point
ness for business continuity 2024-08-21
A
(Revision of ISO/IEC 27031:2011)
ISO 7434:2024 en Fasteners — Slotted set screws with
ISO/IEC 21122-2 Information technology — JPEG
fr cone point
XS low-latency lightweight image
A
coding system — Part 2: Profiles
and buffer models
(Revision of ISO/IEC 21122-2:2022, ISO 7435:2024 en Fasteners — Slotted set screws with dog
ISO/IEC 21122-2:2022/Amd 1:2022) fr point
A
ISO/IEC 21122-3 Information technology — JPEG
XS low-latency lightweight image
coding system — Part 3: Transport ISO 7436:2024 en Fasteners — Slotted set screws with cup
and container formats fr point
(Revision of ISO/IEC 21122-3:2022) A
ISO/IEC 23000- Information technology — Multi-
19:2024/Amd 1 media application format (MPEG-A) TC 6 Paper, board and pulps
— Part 19: Common media applica- ISO 7763:2024 en Testing of paper and board — Com-
tion format (CMAF) for segmented pressive strength of a sample held in
media — Amendment 1: Low com- S-shape B
plexity enhancement video Coding
(LCEVC) and other technologies
TC 8 Ships and marine technology
ISO/IEC 23090- Information technology — Coded
18:2024/FDAmd representation of immersive media ISO 15371:2024 en Ships and marine technology — Fire-
1 — Part 18: Carriage of geometry- 2024-08-19 extinguishing systems for protection of
based point cloud compression galley cooking equipment D
data — Amendment 1: Support for
temporal scalability

ISO Update, Supplement to ISO Focus -- July 2024 13

 ISO 24132:2024 en Ships and marine technology — Design ISO 1171:2024 en Coal and coke — Determination of ash
and testing of marine transfer arms for
liquefied hydrogen G A

ISO 13205:2024 en Marine technology — Seawater desali- TC 33 Refractories

nation — Vocabulary
ISO 8840:2021 fr Refractory materials — Determination
B
of bulk density of granular materials
(grain density) C
TC 17 Steel
ISO 4954-1:2024 en Steels for cold heading and cold extrud- ISO en Chemical analysis of raw materials and
ing — Technical delivery conditions — 21068-2:2024 fr refractory products containing silicon-
Part 1: Non-alloy and alloy steels G carbide, silicon-nitride, silicon-oxynitride F
and sialon — Part 2: Determination of
volatile components, total carbon, free
ISO 4954-2:2024 en Steels for cold heading and cold extrud-
carbon, silicon carbide, total and free
ing — Technical delivery conditions —
silicon, free and surface silica
Part 2: Stainless steels D
ISO fr Chemical analysis of raw materials and
21068-3:2024 en refractory products containing silicon-
TC 20 Aircraft and space vehicles carbide, silicon-nitride, silicon-oxynitride D
ISO/TR en Space environment (natural and artifi- and sialon — Part 3: Determination
23689:2024 cial) — Space weather information for of nitrogen, oxygen and metallic and
use in space systems operations E oxidic constituents
ISO en Chemical analysis of raw materials and
TC 21 Equipment for fire protection and 21068-4:2024 fr refractory products containing silicon-
fire fighting carbide, silicon-nitride, silicon-oxynitride B
and sialon — Part 4: XRD methods
ISO 7076-6:2024 en Fire protection — Foam fire extinguish-
ing systems — Part 6: Vehicle-mounted TC 34 Food products
compressed air foam systems D ISO 7218:2024 en Microbiology of the food chain —
fr General requirements and guidance for
TC 22 Road vehicles microbiological examinations G
ISO en Road vehicles — Vehicle test meth-
11451-3:2024 ods for electrical disturbances from ISO 29842:2024 en Sensory analysis — Methodology — Bal-
narrowband radiated electromagnetic G fr anced incomplete block designs
energy — Part 3: On-board transmitter D
simulation
ISO 11565:2024 en Road vehicles — Spark-plugs — Test ISO 24381:2023 fr Bee propolis — Specifications
methods and requirements
B F

ISO 5474-1:2024 en Electrically propelled road vehicles — TC 35 Paints and varnishes

Functional and safety requirements ISO 11890- en Paints and varnishes — Determination
for power transfer between vehicle D 2:2020/Amd fr of volatile organic compounds(VOC)
and external electric circuit — Part 1: 1:2024 and/or semi volatile organic compounds XZ
General requirements for conductive (SVOC) content — Part 2: Gas-chromato-
power transfer graphic method — Amendment 1
ISO 5474-2:2024 en Electrically propelled road vehicles — TC 37 Language and terminology
Functional and safety requirements for
power transfer between vehicle and E ISO en Language coding — A framework for
external electric circuit — Part 2: AC 21636-1:2024 language varieties — Part 1: Vocabulary
power transfer C
ISO 5474-3:2024 en Electrically propelled road vehicles —
Functional and safety requirements for ISO en Language coding — A framework for
power transfer between vehicle and E 21636-3:2024 language varieties — Part 3: Application
external electric circuit — Part 3: DC of the framework B
power transfer
ISO 2575:2021/ en Road vehicles — Symbols for controls, ISO en Language resource management —
Amd 1:2024 indicators and tell-tales — Amendment 24620-5:2024 fr Controlled human communication
1 XZ (CHC) — Part 5: Lexico-morpho-syn- D
tactic principles and methodology for
personal data recognition and protec-
ISO 24605:2024 en Road vehicles — Dimethyl ether (DME)
tion in text
refuelling connector with pressure
equalizing port D TC 43 Acoustics
ISO 5114-1:2024 fr Acoustics — Determination of uncer-
ISO 24671:2024 en Road vehicles — Qualification and cer- en tainties associated with sound emission
tification of technical personnel dealing measures — Part 1: Sound power E
with natural gas vehicles (NGVs) D levels determined from sound pressure
measurements
TC 27 Coal and coke ISO en Acoustics — Test methods for the
26101-2:2024 fr qualification of the acoustic environ-
ment — Part 2: Determination of the C
environmental correction

14 ISO Update, Supplement to ISO Focus -- July 2024

 TC 45 Rubber and rubber products ISO 6944-1:2024 en Fire containment — Elements of build-
ing construction — Part 1: Ventilation
ISO 4080:2024 en Rubber and plastics hoses and tubing,
ducts E
fr and their assemblies — Determination
of permeability to gas B
TC 94 Personal safety -- Personal protec-
ISO 19983:2024 en Rubber — Determination of precision of tive equipment
fr test methods ISO 11611:2024 en Protective clothing for use in welding
F fr and allied processes
F
TC 58 Gas cylinders
ISO fr Protective clothing against heat
ISO 18119:2018/ fr Gas cylinders — Seamless steel and
13506-1:2024 en and flame — Part 1: Test method for
Amd 2:2024 en seamless aluminium-alloy gas cylinders
complete garments — Measurement of F
and tubes — Periodic inspection and XZ
transferred energy using an instrument-
testing — Amendment 2
ed manikin
TC 59 Buildings and civil engineering
ISO en Protective clothing against heat and
works 13506-2:2024 fr flame — Part 2: Skin burn injury predic-
ISO 7817-1:2024 en Building information modelling — Level tion — Calculation requirements and C
fr of information need — Part 1: Concepts test cases
and principles D
TC 104 Freight containers
ISO 1496- en Series 1 freight containers — Specifica-
TC 67 Oil and gas industries including 1:2013/Amd tion and testing — Part 1: General cargo
lower carbon energy 2:2024 containers for general purposes — XZ
ISO 13623:2017/ en Petroleum and natural gas industries Amendment 2
Amd 1:2024 fr — Pipeline transportation systems — TC 108 Mechanical vibration, shock and
Amendment 1: Complementary require- XZ
condition monitoring
ments for the transportation of fluids
containing carbon dioxide or hydrogen ISO en Condition monitoring and diagnostics
13373-10:2024 of machines — Vibration condition
ISO 6398-1:2024 fr Oil and gas industries including lower
monitoring — Part 10: Diagnostic D
en carbon energy — Submersible linear
techniques for electrical generators with
motor systems for artificial lift — Part 1: E
fluid-film bearings
Submersible linear motor
ISO 20816- en Mechanical vibration — Measurement
ISO 15544:2024 fr Oil and gas industries — Offshore pro-
2:2017/Amd and evaluation of machine vibration —
en duction installations — Requirements
1:2024 Part 2: Land-based gas turbines, steam XZ
and guidelines for emergency response F
turbines and generators in excess of 40
MW, with fluid-film bearings and rated
TC 70 Internal combustion engines speeds of 1 500 r/min, 1 800 r/min, 3 000
r/min and 3 600 r/min — Amendment 1
ISO fr Reciprocating internal combustion
8528-12:2022 engine driven alternating current gener- TC 110 Industrial trucks
ating sets — Part 12: Emergency power B
ISO fr Industrial trucks — Verification of stabil-
supply to safety services
22915-1:2024 en ity — Part 1: General
TC 76 Transfusion, infusion and injection, B
and blood processing equipment
for medical and pharmaceutical use ISO en Industrial trucks — Verification of stabil-
ISO fr Prefilled syringes — Part 4: Glass barrels 22915-16:2024 fr ity — Part 16: Pedestrian-propelled
11040-4:2024 en for injectables and sterilized subassem- trucks B
bled syringes ready for filling G
TC 126 Tobacco and tobacco products
ISO en Prefilled syringes — Part 7: Packaging ISO 6488:2021 fr Tobacco and tobacco products —
11040-7:2024 fr systems for sterilized subassembled Determination of water content — Karl
syringes ready for filling D Fischer method B

TC 85 Nuclear energy, nuclear technolo- TC 130 Graphic technology

gies, and radiological protection
ISO en Graphic technology — Printing from
ISO 16646:2024 fr Fusion installations — Criteria for the 15339-1:2024 digital data across multiple technologies
en design and operation of confinement — Part 1: Principles B
and ventilation systems of tritium fu- G
sion facilities and fusion fuel handling
facilities TC 135 Non-destructive testing
ISO 17099:2024 en Radiological protection — Performance ISO 16946:2024 fr Non-destructive testing — Ultrasonic
fr criteria for laboratories using the en testing — Specification for a step wedge
cytokinesis-block micronucleus (CBMN) E standard block A
assay in peripheral blood lymphocytes
for biological dosimetry ISO 32679:2024 fr Non-destructive testing — Radiographic
ISO 12183:2024 fr Nuclear fuel technology — Controlled- en testing — Determination of the size of
potential coulometric measurement of industrial radiographic gamma sources B
plutonium E
TC 142 Cleaning equipment for air and
TC 92 Fire safety other gases

ISO Update, Supplement to ISO Focus -- July 2024 15

 ISO 23742:2024 en Test method for the evaluation of ISO 11277:2020/ en Soil quality — Determination of particle
permeability and filtration efficiency Amd 1:2024 fr size distribution in mineral soil material
distribution of bag filter medium C — Method by sieving and sedimenta- XZ
tion — Amendment 1
TC 145 Graphical symbols TC 201 Surface chemical analysis
ISO 7010:2019/ fr Graphical symbols — Safety colours and ISO 5861:2024 en Surface chemical analysis — X-ray
Amd 8:2024 safety signs — Registered safety signs photoelectron spectroscopy — Method
— Amendment 8 XZ of intensity calibration for quartz-crystal E
monochromated Al Kα XPS instruments
ISO en Safety information for the content of TC 202 Microbeam analysis
20560-1:2024 piping systems and tanks — Part 1: Pip-
ISO 14594:2024 en Microbeam analysis — Electron probe
ing systems D
microanalysis — Guidelines for the de-
termination of experimental parameters C
TC 146 Air quality for wavelength dispersive spectroscopy
ISO 6323-1:2024 en Workplace air — Determination of TC 204 Intelligent transport systems
arsenic and arsenic compounds by
ISO fr Intelligent transport systems — Graphic
electrothermal atomic absorption spec- D
14823-1:2024 data dictionary — Part 1: Specification
trometry — Part 1: Arsenic and arsenic
G
compounds, except arsine by ET-AAS
TC 156 Corrosion of metals and alloys ISO en Intelligent transport systems — Data
ISO 9227:2022/ en Corrosion tests in artificial atmospheres 15784-2:2024 exchange involving roadside modules
Amd 1:2024 fr — Salt spray tests — Amendment 1: communication — Part 2: Centre to field D
Footnote of Warning XZ device communications using Simple
Network Management Protocol (SNMP)
ISO 10062:2022/ en Corrosion tests in artificial atmosphere ISO/TR en Intelligent transport systems — Per-
Amd 1:2024 fr at very low concentrations of polluting 21734-3:2024 formance testing for connectivity and
gas(es) — Amendment 1: Footnote of XZ safety functions of automated driving D
Warning buses in public transport — Part 3:
Service framework and use cases
ISO 11782- fr Corrosion of metals and alloys — Cor-
2:1998/Amd rosion fatigue testing — Part 2: Crack ISO/TS en Intelligent transport systems — Road-
1:2024 propagation testing using precracked XZ 22741-2:2024 side modules AP-DATEX data interface
specimens — Amendment 1 — Part 2: Generalised field device basic C
management
TC 161 Controls and protective devices for
gaseous and liquid fuels TC 207 Environmental management
ISO en Gas pressure safety and control devices ISO 14015:2022 es Environmental management — Guide-
23555-3:2024 for use in gas transmission, distribution lines for environmental due diligence
and installations for inlet pressures up to F assessment D
and including 10 MPa — Part 3: Safety
shut-off devices ISO 14020:2022 es Environmental statements and pro-
TC 172 Optics and photonics grammes for products — Principles and
general requirements D
ISO 8237:2024 en Optics and photonics — Optical materi-
als and components — Specification of
chalcogenide glass used in the infrared B TC 215 Health informatics
spectrum ISO/TS en Health informatics — The architecture of
TC 176 Quality management and quality 5777:2024 internet healthcare service network
assurance B

ISO 10009:2024 fr Quality management — Guidance for

en quality tools and their application ISO/TR en Health informatics — Standardizing
G 6231:2024 graphical content
C

TC 178 Lifts, escalators and moving walks

ISO/TS en Health informatics — General require-
ISO/TS en Lifts for the transport of persons and 9321:2024 ments of multi-centre medical data
8100-22:2024 goods — Part 22: Prerequisites for certi- collaborative analysis C
fication of lifts, model lifts, lift compo- B
nents and lift functions
ISO/TS en Genomics Informatics — Data elements
ISO/TS en Lifts for the transport of persons and 20428:2024 and their metadata for describing
8100-23:2024 goods — Part 23: Requirements for structured clinical genomic sequence E
bodies certifying lifts, model lifts, lift B information in electronic health records
components and lift functions
TC 219 Floor coverings
TC 184 Automation systems and
ISO 24342:2024 fr Resilient and textile floor coverings
integration en — Determination of side length, edge
ISO en Data quality — Part 115: Master data: Ex- straightness and squareness of tiles and B
8000-115:2024 change of quality identifiers: Syntactic, planks
semantic and resolution requirements A
TC 221 Geosynthetics
ISO en Geotextiles and geotextile-related prod-
TC 190 Soil quality
13426-2:2024 fr ucts — Strength of internal structural
junctions — Part 2: Geocomposites B

16 ISO Update, Supplement to ISO Focus -- July 2024

 TC 224 Drinking water, wastewater and ISO/IEC en Information technology — JPEG XL im-
stormwater systems and services 18181-2:2024 age coding system — Part 2: File format
C
ISO fr Drinking water, wastewater and storm-
24566-2:2024 en water systems and services — Adapta-
tion of water services to climate change F ISO/IEC en Information technology — Specification
impacts — Part 2: Stormwater services 23078-1:2024 of digital rights management (DRM)
technology for digital publications — A
TC 228 Tourism and related services Part 1: Overview of copyright protection
ISO 18725:2024 en Tourism and related services — Yacht technologies in use in the publishing
fr harbours and dry stacks — Require- industry
ments for clean harbours and active C ISO/IEC en Information technology — Specification
biodiversity harbours 23078-2:2024 of digital rights management (DRM)
TC 229 Nanotechnologies technology for digital publications — F
Part 2: User key-based protection
ISO/TR en Nanotechnologies — Considerations for
23652:2024 radioisotope labelling methods of nano- ISO/IEC en Information technology — Specification
materials for performance evaluation D 23078-3:2024 of digital rights management (DRM)
technology for digital publications — E
Part 3: Device key-based protection
TC 249 Traditional Chinese medicine
ISO/IEC en Information technology — Biometrics
ISO 9299:2024 en Traditional Chinese medicine — 24741:2024 — Overview and application
<i>Curcuma longa </i>rhizome F
C
ISO/IEC en Information technology — IT Enabled
ISO/TS en Traditional Chinese medicine — Vocabu- 30105-1:2024 Services-Business Process Outsourcing
23961-3:2024 lary for diagnostics — Part 3: Abdomen (ITES-BPO) lifecycle processes — Part 1: E
D Process reference model (PRM)
ISO/IEC en Information technology — IT Enabled
TC 267 Facility management 30105-2:2024 Services-Business Process Outsourcing
ISO/TR en Facility management’s role in sustain- (ITES-BPO) lifecycle processes — Part 2: H
41019:2024 ability, resilience and adaptability Process assessment model (PAM)
F ISO/IEC en Information technology — IT Enabled
30105-3:2024 Services-Business Process Outsourcing
(ITES-BPO) lifecycle processes — Part D
TC 268 Sustainable cities and communities
3: Measurement framework (MF) and
ISO 37111:2024 en Sustainable cities and communities — organization maturity model (OMM)
Urban settlements — Guidance for a
ISO/IEC en Information technology — IT Enabled
flexible approach to phased implemen- E
30105-5:2024 Services-Business Process Outsourcing
tation of ISO 37101
(ITES-BPO) lifecycle processes — Part 5: E
TC 282 Water reuse Guidance
ISO 9111:2024 en Water reuse in urban areas — Guide-
lines for benefit evaluation of reclaimed
water use C

TC 334 Reference materials

ISO 33403:2024 en Reference materials — Requirements
fr and recommendations for use
D
Standards confirmed
JTC 1 Information technology
ISO/IEC en Smart cities — Guidance to establishing
The following International Standards are confimred for a five year period:
17917:2024 a decision-making framework for shar-
ing data and information services F
TC 1 Screw threads
ISO/IEC en Information technology — On-card ISO 16239:2013 (reconfirmed)
24787-1:2024 biometric comparison — Part 1: General
principles and specifications E TC 8 Ships and marine technology
ISO 799-1:2019
ISO/IEC en Information technology — On-card ISO 5625:1978 (reconfirmed)
24787-2:2024 biometric comparison — Part 2: Work-
sharing mechanism A ISO 8277:2013 (reconfirmed)
ISO 13613:2011 (reconfirmed)
ISO/IEC en Information security — Digital signa- ISO 14726:2008 (reconfirmed)
14888-4:2024 tures with appendix — Part 4: Stateful
hash-based mechanisms G ISO 15748-1:2002 (reconfirmed)
ISO 15748-2:2002 (reconfirmed)
ISO/IEC en Cybersecurity – IoT security and privacy ISO 15749-1:2004 (reconfirmed)
27403:2024 – Guidelines for IoT-domotics
F ISO 15749-2:2004 (reconfirmed)
ISO 15749-3:2004 (reconfirmed)
ISO 15749-4:2004 (reconfirmed)

ISO Update, Supplement to ISO Focus -- July 2024 17

 ISO 15749-5:2004 (reconfirmed) ISO 240:2016
ISO 21157:2018 ISO 866:2016
ISO 21159:2018 ISO 1641-1:2016
TC 10 Technical product documentation ISO 1641-2:2011 (reconfirmed)
ISO 129-5:2018 ISO 5420:1983 (reconfirmed)
ISO 2162-1:1993 (reconfirmed) ISO 5968:1981 (reconfirmed)
ISO 2203:1973 (reconfirmed) ISO 6262-1:2013 (reconfirmed)
ISO 3952-1:1981 (reconfirmed) ISO 6262-2:2013 (reconfirmed)
ISO 3952-2:1981 (reconfirmed) ISO 11529:2013 (reconfirmed)
ISO 3952-3:1979 (reconfirmed) ISO 4228:1986 (reconfirmed)
ISO 3952-4:1984 (reconfirmed) ISO 5742:2004 (reconfirmed)
ISO 6410-1:1993 (reconfirmed) ISO 8764-1:2004 (reconfirmed)
ISO 6410-2:1993 (reconfirmed) ISO 10914:1996 (reconfirmed)
ISO 6411:1982 (reconfirmed) TC 31 Tyres, rims and valves
ISO 6413:2018 ISO 7867-1:2018
ISO 8826-1:1989 (reconfirmed) ISO 7867-2:2018
ISO 8826-2:1994 (reconfirmed) ISO 8664:2018
ISO 9222-1:1989 (reconfirmed) ISO 11795:2018
ISO 9222-2:1989 (reconfirmed) TC 34 Food products
ISO 13444:2012 (reconfirmed) ISO 658:2002 (reconfirmed)
ISO 15785:2002 (reconfirmed) ISO 729:1988 (reconfirmed)
ISO 15786:2008 (reconfirmed) ISO 735:1977 (reconfirmed)
TC 17 Steel ISO 5502:1992 (reconfirmed)
ISO 6929:2013 (reconfirmed) ISO 8892:1987 (reconfirmed)
ISO 7452:2013 (reconfirmed) ISO 3588:1977 (reconfirmed)
ISO 15630-1:2019 ISO 20976-1:2019
ISO 15630-2:2019 ISO 22117:2019
TC 20 Aircraft and space vehicles TC 35 Paints and varnishes
ISO 5843-5:1990 (reconfirmed) ISO 21227-1:2003 (reconfirmed)
ISO 5843-8:1988 (reconfirmed) ISO 21227-4:2008 (reconfirmed)
ISO 5843-9:1988 (reconfirmed) ISO 21546:2019
ISO 5843-10:1988 (reconfirmed) TC 37 Language and terminology
ISO 16004:2017 (reconfirmed) ISO 12615:2004 (reconfirmed)
ISO 16290:2013 (reconfirmed) TC 38 Textiles
TC 22 Road vehicles ISO 1833-6:2018
ISO 6622-2:2013 (reconfirmed) ISO 1833-20:2018
ISO/TS 14198:2019 ISO 10325:2018
ISO 15006:2011 (reconfirmed) TC 39 Machine tools
ISO 18868:2013 (reconfirmed) ISO 230-6:2002 (reconfirmed)
TC 23 Tractors and machinery for agriculture and ISO 1701-1:2004 (reconfirmed)
forestry ISO 1701-2:2004 (reconfirmed)
ISO/TS 15079:2001 (reconfirmed) ISO 2423:1982 (reconfirmed)
ISO 6814:2009 (reconfirmed) ISO 2772:2019
ISO 8084:2003 (reconfirmed) ISO 6545:1992 (reconfirmed)
ISO 11169:1993 (reconfirmed) ISO 13041-4:2004 (reconfirmed)
ISO 8224-2:1991 (reconfirmed) ISO 13041-8:2004 (reconfirmed)
ISO 13693-1:2013 (reconfirmed) ISO 23125:2015
ISO 15081:2011 (reconfirmed)
TC 42 Photography
TC 28 Petroleum and related products, fuels and ISO 516:2019
lubricants from natural or synthetic sources
ISO 12232:2019
ISO 12937:2000 (reconfirmed)
ISO 15781:2019
TC 29 Small tools
ISO 18938:2014 (reconfirmed)
ISO 2421:2003 (reconfirmed)
ISO 18943:2014 (reconfirmed)
ISO 6106:2013 (reconfirmed)
ISO 18949:2019
ISO 239:1999 (reconfirmed)

18 ISO Update, Supplement to ISO Focus -- July 2024

 ISO/TS 18950:2021 TC 58 Gas cylinders
ISO/TS 20791-2:2021 ISO 11117:2019
ISO 20954-1:2019 ISO 16964:2019
TC 43 Acoustics ISO 11439:2013 (reconfirmed)
ISO 354:2003 (reconfirmed) TC 59 Buildings and civil engineering works
TC 44 Welding and allied processes ISO 19650-1:2018
ISO 5178:2019 ISO 19650-2:2018
ISO 13588:2019 TC 61 Plastics
ISO 17279-1:2018 ISO 6721-1:2019
ISO 17279-2:2018 ISO 6721-2:2019
ISO 14731:2019 ISO 6721-4:2019
TC 45 Rubber and rubber products ISO 6721-5:2019
ISO/TS 22687:2018 (reconfirmed) ISO 6721-6:2019
ISO/TS 289-4:2017 (reconfirmed) ISO 6721-7:2019
ISO 815-2:2019 ISO 6721-8:2019
ISO 2285:2019 ISO 6721-9:2019
ISO 2921:2019 ISO 6721-11:2019
ISO 2951:2019 ISO 13468-1:2019
ISO 4664-2:2006 (reconfirmed) ISO 16014-1:2019
ISO 7323:2006 (reconfirmed) ISO 16014-2:2019
ISO 8013:2019 ISO 16014-3:2019
ISO 11345:2006 (reconfirmed) ISO 16014-4:2019
ISO 18766:2014 (reconfirmed) ISO 16014-5:2019
ISO 124:2014 (reconfirmed) ISO 17221:2014 (reconfirmed)
ISO 248-2:2019 ISO 22007-6:2014 (reconfirmed)
ISO 1656:2019 ISO 11833-2:1998 (reconfirmed)
ISO 2005:2014 (reconfirmed) ISO 13894-2:2005 (reconfirmed)
ISO 2006-2:2009 (reconfirmed) ISO 15105-2:2003 (reconfirmed)
ISO 2303:2019 ISO 15106-3:2003 (reconfirmed)
ISO 2393:2014 (reconfirmed) ISO 15987:2003 (reconfirmed)
ISO 2476:2014 (reconfirmed) ISO 1268-9:2003 (reconfirmed)
ISO 5794-2:2014 (reconfirmed) ISO 1268-10:2005 (reconfirmed)
ISO 6209:2009 (reconfirmed) ISO 1268-11:2005 (reconfirmed)
ISO 6225-1:2006 (reconfirmed) ISO 4603:1993 (reconfirmed)
ISO 7663:2014 (reconfirmed) ISO 13931:2013 (reconfirmed)
ISO/TS 16095:2021 ISO 17771:2003 (reconfirmed)
ISO/TS 16096:2021 TC 67 Oil and gas industries including lower carbon
ISO 17403:2014 (reconfirmed) energy
ISO 20927:2019 ISO 11961:2018

ISO 1419:2019 TC 69 Applications of statistical methods

ISO 2231:1989 (reconfirmed) ISO 16269-8:2004 (reconfirmed)
ISO 3302-1:2014 (reconfirmed) ISO 2859-3:2005 (reconfirmed)
ISO 5979:1982 (reconfirmed) ISO 28590:2017
ISO 6451:1982 (reconfirmed) ISO 28591:2017
ISO 14285:2014 (reconfirmed) ISO 28592:2017
ISO 21171:2006 (reconfirmed) ISO 28593:2017

TC 46 Information and documentation ISO 28594:2017

ISO 3901:2019 ISO 28597:2017

ISO/TS 16175-2:2020 ISO 28598-1:2017

TC 48 Laboratory equipment ISO 28598-2:2017

ISO 7713:1985 (reconfirmed) TC 70 Internal combustion engines

ISO 12771:1997 (reconfirmed) ISO 2710-2:2019

TC 54 Essential oils TC 79 Light metals and their alloys

ISO 9841:2013 (reconfirmed) ISO 8251:2018

ISO Update, Supplement to ISO Focus -- July 2024 19

 TC 85 Nuclear energy, nuclear technologies, and TC 138 Plastics pipes, fittings and valves for the
radiological protection transport of fluids
ISO/ASTM (reconfirmed) ISO 14531-1:2002 (reconfirmed)
51401:2013
ISO 580:2005 (reconfirmed)
ISO/ASTM (reconfirmed)
ISO 11413:2019
51956:2013
ISO 15908:2002 (reconfirmed)
ISO/ASTM (reconfirmed)
52701:2013 ISO/TS 10465-1:2007 (reconfirmed)
TC 91 Surface active agents ISO/TS 12512:2017 (reconfirmed)
ISO 21703:2019 TC 146 Air quality
TC 92 Fire safety ISO 19926-1:2019
ISO 26367-2:2017 ISO 16000-19:2012 (reconfirmed)

TC 96 Cranes ISO 16000-21:2013 (reconfirmed)

ISO 11662-1:1995 (reconfirmed) ISO 16000-37:2019

TC 100 Chains and chain sprockets for power trans- ISO 16000-38:2019
mission and conveyors TC 147 Water quality
ISO 3512:1992 (reconfirmed) ISO 5815-2:2003 (reconfirmed)
TC 102 Iron ore and direct reduced iron ISO 11423-1:1997 (reconfirmed)
ISO 4694:1987 (reconfirmed) ISO 11423-2:1997 (reconfirmed)
TC 107 Metallic and other inorganic coatings ISO 11905-1:1997 (reconfirmed)
ISO 2064:1996 (reconfirmed) ISO 12020:1997 (reconfirmed)
ISO 2177:2003 (reconfirmed) ISO 17353:2004 (reconfirmed)
ISO 3868:1976 (reconfirmed) ISO 7346-3:1996 (reconfirmed)
ISO 4519:1980 (reconfirmed) ISO 9887:1992 (reconfirmed)
ISO 8289-2:2019 ISO 10229:1994 (reconfirmed)
ISO 10111:2019 ISO 10634:2018
TC 108 Mechanical vibration, shock and condition ISO 10708:1997 (reconfirmed)
monitoring ISO 11733:2004 (reconfirmed)
ISO 14839-2:2004 (reconfirmed) ISO 14592-1:2002 (reconfirmed)
ISO 5982:2019 ISO 14592-2:2002 (reconfirmed)
ISO 14835-2:2005 (reconfirmed) ISO 5667-9:1992 (reconfirmed)
TC 112 Vacuum technology TC 150 Implants for surgery
ISO 20146:2019 ISO 5832-9:2019
ISO 21360-3:2019 ISO 5832-12:2019
TC 113 Hydrometry ISO 5832-14:2019
ISO 2537:2007 (reconfirmed) ISO 6474-1:2019
ISO 3454:2008 (reconfirmed) ISO 6474-2:2019
ISO 4366:2007 (reconfirmed) ISO 9583:1993 (reconfirmed)
ISO 11655:1995 (reconfirmed) ISO 13782:2019
TC 114 Horology ISO 15309:2013 (reconfirmed)
ISO 3158:1976 (reconfirmed) ISO 16402:2008 (reconfirmed)
TC 115 Pumps ISO 16428:2005 (reconfirmed)
ISO/ASME ISO 16429:2004 (reconfirmed)
14414:2019 ISO 14242-1:2014 (reconfirmed)
TC 121 Anaesthetic and respiratory equipment ISO 14242-3:2009 (reconfirmed)
ISO 19223:2019 ISO 14243-1:2009 (reconfirmed)
TC 123 Plain bearings ISO 14243-3:2014 (reconfirmed)
ISO 4384-1:2019 TC 154 Processes, data elements and documents in
ISO 19349:2019 commerce, industry and administration
TC 131 Fluid power systems ISO 8601-1:2019
ISO/TS 11672:2016 (reconfirmed) ISO 8601-2:2019
ISO 3939:1977 (reconfirmed) TC 155 Nickel and nickel alloys
TC 136 Furniture ISO 12725:2019
ISO 7175-1:2019 ISO 23163:2019
ISO 7175-2:2019 TC 158 Analysis of gases
ISO 6145-7:2018

20 ISO Update, Supplement to ISO Focus -- July 2024

 ISO 14167:2018 ISO 10303-509:2001 (reconfirmed)
TC 159 Ergonomics ISO 10303-510:2000 (reconfirmed)
ISO 27501:2019 ISO 10303-511:2001 (reconfirmed)
TC 160 Glass in building ISO 10303-513:2000 (reconfirmed)
ISO 11479-1:2011 (reconfirmed) ISO 10303-519:2000 (reconfirmed)
ISO 11479-2:2011 (reconfirmed) ISO 10303-520:2018
ISO 25537:2008 (reconfirmed) TC 188 Small craft
TC 163 Thermal performance and energy use in the ISO 9650-3:2009 (reconfirmed)
built environment TC 190 Soil quality
ISO 8302:1991 (reconfirmed) ISO 11268-1:2012 (reconfirmed)
ISO 8497:1994 (reconfirmed) ISO 15799:2019
ISO 8990:1994 (reconfirmed) ISO 18400-206:2018
ISO 10051:1996 (reconfirmed) ISO 21286:2019
ISO 12570:2000 (reconfirmed) ISO 23753-1:2019
TC 164 Mechanical testing of metals ISO 23753-2:2019
ISO 7802:2013 (reconfirmed) ISO 29200:2013 (reconfirmed)
ISO 20032:2013 (reconfirmed) ISO/TS 29843-1:2010 (reconfirmed)
TC 165 Timber structures TC 193 Natural gas
ISO 19624:2018 ISO 6974-3:2018
TC 171 Document management applications ISO 6975:1997 (reconfirmed)
ISO 8126:2019 ISO/TR 12148:2009
TC 172 Optics and photonics ISO/TR 24094:2006
ISO 15902:2019 ISO 20676:2018
TC 173 Assistive products TC 204 Intelligent transport systems
ISO 17049:2013 (reconfirmed) ISO/TS 19091:2019 (reconfirmed)
TC 184 Automation systems and integration TC 207 Environmental management
ISO 10303-14:2005 (reconfirmed) ISO 14045:2012 (reconfirmed)
ISO 10303-23:2000 (reconfirmed) TC 211 Geographic information/Geomatics
ISO 10303-24:2001 (reconfirmed) ISO 19111:2019
ISO 10303-28:2007 (reconfirmed) ISO 19112:2019
ISO 10303-34:2001 (reconfirmed) ISO 19115-2:2019
ISO/TS (reconfirmed) TC 213 Dimensional and geometrical product speci-
10303-35:2003 fications and verification
ISO 10303-51:2005 (reconfirmed) ISO 25178-600:2019
ISO 10303-54:2005 (reconfirmed) ISO 25178-607:2019
ISO 10303-57:2018 TC 215 Health informatics
ISO 10303-104:2000 (reconfirmed) ISO/IEEE (reconfirmed)
ISO 10303-111:2007 (reconfirmed) 11073-10406:2012
ISO 10303-112:2006 (reconfirmed) ISO/IEEE (reconfirmed)
11073-20101:2004
ISO 10303-212:2001 (reconfirmed)
ISO/IEEE
ISO 10303-219:2007 (reconfirmed)
11073-20702:2018
ISO 10303-227:2005 (reconfirmed)
ISO/IEEE (reconfirmed)
ISO 10303-233:2012 (reconfirmed) 11073-30200:2004
ISO 10303-236:2006 (reconfirmed) ISO/IEEE (reconfirmed)
11073-30400:2012
ISO 10303-240:2005 (reconfirmed)
ISO 21549-1:2013 (reconfirmed)
ISO/TS (reconfirmed)
10303-332:2002 ISO/TS 22756:2020
ISO/TS (reconfirmed) TC 221 Geosynthetics
10303-436:2006
ISO 9864:2005 (reconfirmed)
ISO 10303-501:2000 (reconfirmed)
ISO 10320:2019
ISO 10303-502:2000 (reconfirmed)
TC 238 Solid Biofuels and Pyrogenic Biocarbon
ISO 10303-505:2000 (reconfirmed)
ISO/TS 20049-2:2020
ISO 10303-506:2018
TC 249 Traditional Chinese medicine
ISO 10303-507:2001 (reconfirmed)
ISO 20493:2018
ISO 10303-508:2001 (reconfirmed)
ISO/TS 20498-4:2020

ISO Update, Supplement to ISO Focus -- July 2024 21

 TC 256 Pigments, dyestuffs and extenders ISO/IEC TS (replaced by ISO/IEC 23078-3:2024)
23078-3:2021
ISO 473:2019
ISO/IEC TR (replaced by ISO/IEC 24741:2024)
ISO 787-9:2019
24741:2018
ISO 787-14:2019
ISO 787-25:2019
ISO 18451-2:2018
ISO 21683:2019
TC 265 Carbon dioxide capture, transportation, and

ISO 27919-1:2018
geological storage
Meeting calendar
JTC 1 Information technology The meeting calendar is available at
ISO/IEC TS https://www.iso.org/meeting-calendar.html
27100:2020
ISO/IEC
15961-3:2019
ISO/IEC (reconfirmed)
24730-61:2013
ISO/IEC (reconfirmed)
24730-62:2013
ISO/IEC TS (reconfirmed)
29167-15:2017
ISO/IEC
20000-10:2018

Standards withdrawn
Period from 01 June to 30 June 2024

TC 17 Steel
ISO 4954:2022 (replaced by ISO 4954-1:2024, ISO 4954-2:2024)
TC 22 Road vehicles
ISO/TS 21104:2019 (replaced by )
TC 46 Information and documentation
ISO/TS 18344:2016 (replaced by )
TC 76 Transfusion, infusion and injection, and
blood processing equipment for medical and
pharmaceutical use
ISO 11040-4:2015/ (replaced by )
Amd 1:2020
TC 126 Tobacco and tobacco products
ISO 22303:2008 (replaced by )
TC 178 Lifts, escalators and moving walks
ISO/TS 22559-3:2011 (replaced by ISO/TS 8100-22:2024)
ISO/TS 22559-4:2011 (replaced by ISO/TS 8100-23:2024)
TC 292 Security and resilience
ISO 28002:2011 (replaced by )
TC 334 Reference materials
ISO Guide 33:2015 (replaced by ISO 33403:2024)
JTC 1 Information technology
ISO/IEC TS (replaced by ISO/IEC 23078-1:2024)
23078-1:2020
ISO/IEC TS (replaced by ISO/IEC 23078-2:2024)
23078-2:2020

22 ISO Update, Supplement to ISO Focus -- July 2024