Scribd
Upload
34 views1 page

Tds - Kansai Property Interior-1705034774

Uploaded by

Fadhli saliha faza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views1 page

Tds - Kansai Property Interior-1705034774

Uploaded by

Fadhli saliha faza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

KANSAI PROPERTY INTERIOR DECORATIVE

Code: 581-xxx TOP COAT FOR INTERIOR AND EXTERIOR WALL

DESCRIPTION USE APPLICATION

Modified acrylic emulsion with anti-bacteria feature To decorate and protect interior such as asbestos,
Equipment Use Volume of thinner Recommended thinner Nozzle orifice Nozzle pressure
cement, masonry, plaster, brickwork, hard and soft
boards Air spray 20 - 30% Clean Water 1,5 - 2,0 mm 3 - 4 bar
Airless spray 0 - 10% Clean Water 0,46 mm 150 bar

FEATURES AND BENEFITS COLOR AND GLOSS LEVEL APPEARANCE Roller 10% Clean Water - -
Brush 10% Clean Water - -
1. Anti-bacteria technology • Available in many colours (see colour card)
2. Easy to clean • Gloss level: matt
3. Non toxic - no added lead or mercury
4. Apple fragrance Overcoating interval for DFT 20 - 30 micron
5. Good hiding power
Overcoating with Interval 5˚C 10˚C 20˚C 30˚C 40˚C
6. Long lasting colour
7. Matt finish Minimum - - - - -
Maximum - - - - -
BASIC DATA

Overcoating interval for DFT 20 - 30 micron


DATA FOR MIXED PRODUCT
Overcoating with Interval 5˚C 10˚C 20˚C 30˚C 40˚C
Number of components One
Minimum - - - - -
Application Method Brush or roller and spray
Maximum - - - - -
Specific Gravity 1,5 g/ml
Volume Solids 40%
Curing time DFT to 20 - 30 micron
Flash Point -
Substrate temperature Dry to touch Dry to handle Full cure
VOC < 5 gr/lt
5˚ C ( 41˚ F ) - - -
Mixing Ratio -
20˚ C ( 50˚ F ) - - -
Dilution Clean Water
30˚ C ( 68˚ F ) 1 hour 4 hors 7 days
Dilution Ratio 10% - 15%
Recommended DFT 20 - 30 micron/ coat
SAFETY PRECAUTIONS
Theoritical coverage 8 - 10 m2/kg at DFT 20 - 30 micron (depend on
color) For paint and recommended water see safety sheet and relevant material safety data sheet
This is a water borne paint and care should be taken to avoid inhalation of spray mist or vapour as well as
Pot Life -
contact between the wet paint and exposed skin or eyes
Overcoating Interval At temperature 30°C
Minimum : 2 hours
Maximum : 7 days INFORMATION DISCLAIMER
Packaging 5 Kg in plastic container • Spreading rate, drying time, and other numerical parameters are based on controlled environment test and
25 Kg in plastic container evaluation. It may vary on actual usage due to differences on surface type and porosity, surrounding humid-
ity and temperature, painters’ skill and equipment, and other external factors. User should always consult
with Kansai Paint for specific guidelines on particulars paint jobs for the best result.
• All information can be adjusted accordingly without further notice.
SURFACE PREPARATION
• All surface must be clean and dry
• Remove the damage or too thick old coat by scrapper / wire brush
• If necessary use special cleaning agent to remove fungus

TECHNICAL DATA SHEET TECHNICAL DATA SHEET

You might also like