Scribd
Upload
48 views

Nozzle Final Dimension

Uploaded by

huntermakwana5535
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
48 views

Nozzle Final Dimension

Uploaded by

huntermakwana5535
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 6

GEMINI ENGI-FAB LIMITED

INTERNAL INSPECTION REPORT Date :10.07.2023


Stage of Inspection / Tests Job No. :11529A/HE
A : Material B : Interim C : Re-Inspection D : Final
Client : Indian Oil Corporation Limited ProjectQty
Equpt. : LUPEC(J-18)
: 01 No. Inspection Agency :
Equipment Name : REGENERATOR REBOILER VCS
P.O. NO. & Date: 77154/109/27621024 DT: 02.03.2022
ITP NO: 077154C-000-SR-0610-001B-B1002-0004
Drawing No. : 077154-000-SR-0610-001B-A2001-0007, Rev:05 EQPT. No. : 1814-E-002A
FINAL NOZZLE VISUAL & DIMENSION MAIN SHELL AS BELOW.
Sr. Nozzle Nozzle SCH. Orientation Elevation Projection
Rating/Type Remark
No. No. Size THK Reqd. Actual Reqd. Actual Reqd. Actual

SCH.
1 LG2 2" 300# WNRF At 225˚ At 225˚ 200 mm from T.L 200 mm from T.L 1280 mm from C/L 1281 mm from C/L ACCEPTABLE
XXS

SCH. 400 mm from 401 mm from


2 U1 2" 300# WNRF 850 mm from T.L 848 mm from T.L 850 mm from T.L 852 mm from T.L ACCEPTABLE
XXS U2 U2

At 180˚ ( offset At 180˚ ( offset


SCH.
3 U2 2" 300# WNRF of 775 dishend of 775 dishend 850 mm from T.L 851 mm from T.L 850 mm from T.L 849 mm from T.L ACCEPTABLE
XXS centre) centre)

At dish end At dish end


4 M1 24" 14 THK 300# WNRF 990 mm from T.L 992 mm from T.L 990 mm from T.L 988 mm from T.L ACCEPTABLE
center center

All dimension are in 'mm' unless otherwise specified.


Visual Inspection is carried out and found satisfactory.
Measuring instruments:- 1) measuring tape: MT-04, Due date:01.02.2024.(5 Meter)
2) measuring tape: MT-02, Due date:01.02.2024.(30 meter)

For Gemini Engi-Fab Limited For VCS


Name : Name :

Signature : Signature :

Date : Date :
GEMINI ENGI-FAB LIMITED
INTERNAL INSPECTION REPORT Date : 10.07.2023
Stage of Inspection / Tests Job No. :11529A/HE
A : Material B : Interim C : Re-Inspection D : Final
Client : Indian Oil Corporation Limited ProjectQty
Equpt. : LUPEC(J-18)
: 01 No. Inspection Agency :
Equipment Name : REGENERATOR REBOILER
VCS
P.O. NO. & Date: 77154/109/27621024 DT: 02.03.2022
ITP NO: 077154C-000-SR-0610-001B-B1002-0004
Drawing No. : 077154-000-SR-0610-001B-A2001-0007, Rev:05 EQPT. No. : 1814-E-002A
FINAL NOZZLE VISUAL & DIMENSION ON MAIN SHELL AS BELOW.
Sr. Nozzle Nozzle SCH. Orientation Elevation Projection
Rating/Type Remark
No. No. Size THK Reqd. Actual Reqd. Actual Reqd. Actual

SCH 1250 mm from sliding 1251 mm from 1470 mm from centre 1473 mm from
1 N3 10" 300# WNRF At 180˚ At 180˚ ACCEPTABLE
100 saddle sliding saddle line centre line

SCH 2100 mm from fixed 2103 mm from fixed 1470 mm from centre 1475 mm from
2 N4 10" 300# WNRF At 180˚ At 180˚ ACCEPTABLE
100 saddle saddle line centre line

SCH 1470 mm from centre 1473 mm from


3 N5 12" 300# WNRF At 0˚ At 0˚ 6450 mm from T.L 6452 mm from T.L ACCEPTABLE
100 line centre line

SCH 1470 mm from centre 1475 mm from


4 N6 12" 300# WNRF At 0˚ At 0˚ 2950 mm from T.L 2949 mm from T.L ACCEPTABLE
100 line centre line

SCH 1470 mm from centre 1470 mm from


5 N7 12" 300# WNRF At 180˚ At 180˚ 520 mm from T.L 522 mm from T.L ACCEPTABLE
80 line centre line

All dimension are in 'mm' unless otherwise specified.


Visual Inspection is carried out and found satisfactory.
Measuring instruments:- 1) measuring tape: MT-04, Due date:01.02.2024.(5 Meter)
2) measuring tape: MT-02, Due date:01.02.2024.(30 meter)

For Gemini Engi-Fab Limited For VCS


Name : Name :

Signature : Signature :

Date : Date :
GEMINI ENGI-FAB LIMITED
INTERNAL INSPECTION REPORT Date : 10.07.2023
Stage of Inspection / Tests Job No. :11529A/HE
A : Material B : Interim C : Re-Inspection D : Final
Client : Indian Oil Corporation Limited ProjectQty
Equpt. : LUPEC(J-18)
: 01 No. Inspection Agency :
Equipment Name : REGENERATOR REBOILER
VCS
P.O. NO. & Date: 77154/109/27621024 DT: 02.03.2022
ITP NO: 077154C-000-SR-0610-001B-B1002-0004
Drawing No. : 077154-000-SR-0610-001B-A2001-0007, Rev:05 EQPT. No. : 1814-E-002A
FINAL NOZZLE VISUAL & DIMENSION ON MAIN SHELL AS BELOW.
Sr. Nozzle Nozzle SCH. Orientation Elevation Projection
Rating/Type Remark
No. No. Size THK Reqd. Actual Reqd. Actual Reqd. Actual

SCH
1 V1 2" 300# WNRF At 0˚ At 0˚ 2250 mm from N5 2252 mm from N5 1470 mm from C/L 1472 mm from C/L ACCEPTABLE
XXS

SCH
2 D 2" 300# WNRF At 180˚ At 180˚ 1750 mm from N3 1752 mm from N3 1470 mm from C/L 1475 mm from C/L ACCEPTABLE
XXS

SCH
3 LT1 2" 300# WNRF At 45˚ At 45˚ 200 mm from T.L 199 mm from T.L 1280 mm from C/L 1280 mm from C/L ACCEPTABLE
XXS

SCH
4 LT2 2" 300# WNRF At 135˚ At 135˚ 200 mm from T.L 203 mm from T.L 1280 mm from C/L 1280 mm from C/L ACCEPTABLE
XXS

SCH
5 LG1 2" 300# WNRF At 315˚ At 315˚ 200 mm from T.L 200 mm from T.L 1280 mm from C/L 1280 mm from C/L ACCEPTABLE
XXS

All dimension are in 'mm' unless otherwise specified.


Visual Inspection is carried out and found satisfactory.
Measuring instruments:- 1) measuring tape: MT-04, Due date:01.02.2024.(5 Meter)
2) measuring tape: MT-02, Due date:01.02.2024.(30 meter)

For Gemini Engi-Fab Limited For VCS


Name : Name :

Signature : Signature :

Date : Date :
GEMINI ENGI-FAB LIMITED
INTERNAL INSPECTION REPORT Date : 17.07.2023
Stage of Inspection / Tests Job No. :11529B/HE
A : Material B : Interim C : Re-Inspection D : Final
Client : Indian Oil Corporation Limited ProjectQty
Equpt. : LUPEC(J-18)
: 01 No. Inspection Agency :
Equipment Name : REGENERATOR REBOILER
VCS
P.O. NO. & Date: 77154/109/27621024 DT: 02.03.2022
ITP NO.: 077154C-000-SR-0610-001B-B1002-0004
Drawing No. : 077154-000-SR-0610-001B-A2001-0007, Rev:01 EQPT. No. : 1814-E-002A
FINAL NOZZLE VISUAL & DIMENSION ON BARREL SHELL AS BELOW.
Sr. Nozzle Nozzle SCH. Orientation Elevation Projection
Rating/Type Remark
No. No. Size THK Reqd. Actual Reqd. Actual Reqd. Actual

SCH.
1 LG2 2" 300# WNRF At 225 At 225 200 mm from T.L 203 mm from T.L 1280 mm from C/L 1281mm from C/L ACCEPTABLE
XXS

SCH. 400 mm from 400 mm


2 U1 2" 300# WNRF 850 mm from T.L 851 mm from T.L 850 mm from T.L 848 mm from T.L ACCEPTABLE
XXS U2 from U2

At 180˚
At 180˚ ( offset
SCH. ( offset of
3 U2 2" 300# WNRF of 775 dishend 850 mm from T.L 849 mm from T.L 850 mm from T.L 850 mm from T.L ACCEPTABLE
XXS centre)
775 dishend
centre)

SCH. At dish end At dish end


4 M1 24" 300# WNRF 990 mm from T.L 991 mm from T.L 990 mm from T.L 988 mm from T.L ACCEPTABLE
XXS center center

All dimension are in 'mm' unless otherwise specified.


All dimension are in 'mm' unless otherwise specified.
Measuring instruments:- 1) measuring tape: MT-04, Due date:01.02.2024.(5 Meter)
2) measuring tape: MT-02, Due date:01.02.2024.(30 meter)

For Gemini Engi-Fab Limited For VCS


Name : Name :

Signature : Signature :

Date : Date :
GEMINI ENGI-FAB LIMITED
INTERNAL INSPECTION REPORT Date :17.07.2023
Stage of Inspection / Tests Job No. :11529B/HE
A : Material B : Interim C : Re-Inspection D : Final
Client : Indian Oil Corporation Limited ProjectQty
Equpt. : LUPEC(J-18)
: 01 No. Inspection Agency :
Equipment Name : REGENERATOR REBOILER VCS
P.O. NO. & Date: 77154/109/27621024 DT: 02.03.2022
ITP NO. & Date: 077154C-000-SR-0610-001B-B1002-0004
Drawing No. : 077154-000-SR-0610-001B-A2001-0007, Rev:01 EQPT. No. : 1814-E-002A
FINAL NOZZLE VISUAL & DIMENSION ON CHANNEL SHELL AS BELOW.
Sr. Nozzle Nozzle SCH. Orientation Elevation Projection
Rating/Type Remark
No. No. Size THK Reqd. Actual Reqd. Actual Reqd. Actual

SCH.
1 V1 2" 300# WNRF At 0˚ At 0˚ 1300 mm from N5 1300 mm from N5 1470 mm from C/L 1473 ACCEPTABLE
XXS

SCH.
2 D 2" 300# WNRF At 180˚ At 180˚ 1750 mm from N4 1750 mm from N4 1470 mm from C/L 1471 ACCEPTABLE
XXS

SCH.
3 LT1 2" 300# WNRF At 45˚ At 45˚ 200 mm from T.L 200 mm from T.L 1280 mm from C/L 1282 ACCEPTABLE
XXS

SCH.
4 LT2 2" 300# WNRF At 135˚ At 135˚ 200 mm from T.L 200 mm from T.L 1280 mm from C/L 1280 ACCEPTABLE
XXS

SCH.
5 LG1 2" 300# WNRF At 315˚ At 315˚ 200 mm from T.L 200 mm from T.L 1280 mm from C/L 1281 ACCEPTABLE
XXS

All dimension are in 'mm' unless otherwise specified.


Visual Inspection is carried out and found satisfactory.
Measuring instruments:- 1) measuring tape: MT-04, Due date:01.02.2024.(5 Meter)
2) measuring tape: MT-02, Due date:01.02.2024.(30 meter)

For Gemini Engi-Fab Limited For VCS


Name : Name :

Signature : Signature :

Date : Date :
GEMINI ENGI-FAB LIMITED
INTERNAL INSPECTION REPORT Date : 17.07.2023
Stage of Inspection / Tests Job No. :11529B/HE
A : Material B : Interim C : Re-Inspection
Equpt. Qty : 01 No. D : Final
Client : Indian Oil Corporation Limited Project : LUPEC(J-18) Inspection Agency :
Equipment Name : REGENERATOR REBOILER
VCS
P.O. NO. & Date: 77154/109/27621024 DT: 02.03.2022
ITP NO. & Date: 077154C-000-SR-0610-001B-B1002-0004
Drawing No. : 077154-000-SR-0610-001B-A2001-0007, Rev:01 EQPT. No. : 1814-E-002A
FINAL NOZZLE VISUAL & DIMENSION ON MAIN SHELL AS BELOW.
Sr. Nozzle Nozzle SCH. Orientation Elevation Projection
Rating/Type Remark
No. No. Size THK Reqd. Actual Reqd. Actual Reqd. Actual
SCH 300# 2250 mm from 2250 mm from 1470 mm from 1472 mm from
1 V1 2" At 0˚ At 0˚ ACCEPTABLE
XXS WNRF N5 N5 C/L C/L
SCH 300# 1750 mm from 1750 mm from 1470 mm from 1473 mm from
2 D 2" At 180˚ At 180˚ ACCEPTABLE
XXS WNRF N3 N3 C/L C/L
SCH 300# 200 mm from 200 mm from 1470 mm from 1472 mm from
3 LT1 2" At 45˚ At 45˚ ACCEPTABLE
XXS WNRF T.L T.L C/L C/L
SCH 300# 200 mm from 200 mm from 1470 mm from 1470 mm from
4 LT2 2" At 135˚ At 135˚ ACCEPTABLE
XXS WNRF T.L T.L C/L C/L
SCH 300# 200 mm from 200 mm from 1470 mm from
5 LG1 2" At 315˚ At 315˚ 1473 mm from C/L ACCEPTABLE
XXS WNRF T.L T.L C/L
All dimension are in 'mm' unless otherwise specified.
Visual Inspection is carried out and found satisfactory.
Measuring instruments:- 1) measuring tape: MT-04, Due date:01.02.2024.(5 Meter)
2) measuring tape: MT-02, Due date:01.02.2024.(30 meter)
For Gemini Engi-Fab Limited For VCS
Name : Name :

Signature : Signature :

Date : Date :

You might also like