SKF Pulse™ 2 3 4

Your entry point to predictive

maintenance.

SKF Pulse combines the easy-to-use, portable SKF QuickCollect

sensor with the SKF Pulse free mobile app for iOS and Android
to monitor machine health and quickly identify machinery issues
before operations are impacted. Acting as a smart vibration tool, the 1

sensor transmits wirelessly to the SKF Pulse app, instantly providing

intuitive machine diagnostics.

Machine monitoring made easy.

• Easy-to-use, portable QuickCollect • In-app SKF Pulse™ Checks provide
sensor and a free mobile app expert analysis, advice and diagnostic
• Easy start-up with no prior training reports from SKF
or experience needed • All at a cost-effective price point – Sensor controls and indicators:

• Quickly monitors machine health no need to make the case for 1 Power button –
and helps identify machinery issues capital expenditure Powers the sensor on and off
before operations are impacted • Access to SKF Engineering support 2 Battery LED (green, red) –
and SKF E-Learning Indicates status of battery charge
• Instant feedback from vibration
and temperature measurement 3 Communication LED (green, red) –
Indicates sensor connection status to
app and when firmware updates are in
progress
SKF QuickCollect Sensor features: 4 All-purpose check LED –
For future use
• Velocity, acceleration and • Rechargeable lithium battery
temperature measurements (8 hours with normal usage)
Four SKF QuickCollect models
• Bluetooth® communication • One year warranty covering now available!
with iOS and Android devices manufacturing defects
CMDT 391-K-SL:
• Rugged, industrial design: drop • Two year calibration certificate Standard Sensor
test at 6 ft (1.8 m), water- and • Available for use in hazardous areas CMDT 391-PRO-K-SL:
dust-resistant (IP65) with the CMDT391-EX model Standard Sensor with carrying
case and accessories
CMDT 391-EX-K-SL:
For more information, contact your
Hazardous Area Sensor
SKF Representative or visit skfusa.com/skfpulse.
CMDT 391-EX-PRO-K-SL:
Hazardous Area Sensor with
carrying case and accessories
Technical specifications for SKF Environmental
Storage temperature -5 to +115 °F (-20 to +45 °C) for
QuickCollect sensor less than one month
-5 to +95 °F (-20 to +35 °C) for
Regulatory specifications less than six months
IP rating IP 65, dust and water ingress Operating temperature, -5 to +140°F (-20 to +60°C)
protection testing standard built in infrared (IR) sensor
Radio approvals Europe (CE), USA (FCC), Canada (IC) Operating temperature, 32 to +105 °F (0 to +40 °C) for charging
CE mark CE approved battery -5 to +140 °F (-20 to +60 °C)
Measurement range for discharging
Overalls Operating temperature, 32 to +105 °F (0 to +40 °C)
Velocity 10 Hz to 1 kHz up to 2.17 in/s (55mm/s) charger
Recommended speed range: Altitude Up to 6,560 ft (2,000 m)
600 rpm - 3600 rpm Humidity 95% non-condensing
Bearing condition SKF patented envelope acceleration Physical
up to 20 gE Case Water and dust resistant (IP65)
FFT Drop test 6 ft (1.8 m) in accordance with
Maximum frequency Velocity 1 kHz, enveloped MIL-STD-810G
acceleration 2 kHz Dimensions 1.8 x 1.8 x 5.3 in (45 x 45 x 135 mm)
Lines of resolution Velocity 400, enveloped Weight 7 oz (200 g)
acceleration 800
External sensor support
Detection type Velocity RMS, enveloped
External sensor types 2-wire, constant current, 100 mV/g acceler-
acceleration true peak to peak
ometers. Supports ICP accelerometers.
Temperature Standard operating temperature range
Provides 3 mA minimum.
is -5 to +140°F (-20 to +60°C). Sensor is
Connection cable SKF CMAC 8010 (IEPE).
capable of measuring beyond the standard
SKF Pulse operating temperature range
up to 212°F (100°C) for short periods.
Ordering information
Power
Standard kits Hazardous area kits
Main power Rechargeable lithium battery,
3.7 V DC, 0.14 A
CMDT 391-K-SL CMDT 391-EX-K-SL
Battery lifetime Eight hours with normal usage
CMDT 391 sensor CMDT 391 Ex sensor
Manual power off: Press and hold
CMAC 109 magnet CMAC 109 magnet
power button for 3+ seconds
CMAC 8004 power supply CMAC 8007 power supply
Auto power off: After 15 minutes
of no activity
CMDT 391-PRO-K-SL CMDT 391-EX-PRO-K-SL
MAINS supply Varies up to ±10% of the nominal
CMDT 391-K-SL kit plus: CMDT 391-EX-K-SL kit plus:
voltage, charger voltage, TRANSIENT OVERVOLTAGE
CMAC 8010 accelerometer cable CMAC 8010-EX accelerometer
CATEGORY II; POLLUTION DEGREE 2
CMSS 2100 accelerometer cable
Charger Input 5 V DC ±10%, 1 A
CMAC 3715 BNC adaptor CMSS 786A-IS accelerometer
AC adapter Input 100 to 240 V AC, 0.4 A, 47 to 63 Hz
CMAC 8011 carry case CMAC 3715 BNC adaptor
Output 5 V DC, 1.6 A
CMAC 8011 carry case

Measure vibration Monitor asset health On-the-spot access to SKF analysis experts SKF Pulse Check reports
and temperature

Agency approvals for hazardous area

For more information, contact your SKF Representative, CMDT 391-Ex with CMAC 8010-Ex cable
email [email protected] or visit skfusa.com/skfpulse.
Ex ib IIC T4 Gb –20 °C ≤ Ta ≤ +60 °C
® SKF is a registered trademark of the SKF Group.
Class I, Zone 1, AEx ib IIC T4 Gb –20 °C ≤ Ta ≤ +60 °C
© SKF Group 2021 IS Class I, Div. 2, Group A, B, C, D, T4
The contents of this publication are the copyright of the publisher and may not be reproduced (even
extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of
the information contained in this publication but no liability can be accepted for any loss or damage
whether direct, indirect or consequential arising out of the use of the information contained herein. Ex ib IIC T4 Gb –20 °C ≤ Ta ≤ +60 °C
PUB 100-695 · August 2021
SKF Pulse™
Frequently Asked Questions
• How do I get started with SKF Pulse?
First, you purchase an SKF QuickCollect sensor from your Authorized SKF
Distributor. The sensor allows you to easily collect and interpret vibration and
temperature data from your rotating equipment. Once you have the sensor,
download the SKF Pulse app from the Apple Store or GooglePlay. You will be
able to take advantage of a free trial of the SKF Pulse subscription when you
register on the app, so be sure to wait until you have your sensor to get started!

• What devices/operating systems are supported by SKF Pulse?

The SKF Pulse app is designed to be compatible with devices running
iOS 13 or later and Android 8 or later.
SKF Pulse can be found on the Apple Store and Google Play.

• I’m having connection problems; how do I troubleshoot?

1. Confirm Bluetooth® is enabled on your device.
2. Confirm sensor is turned on and has a charged battery
(see battery indicator light).
Four SKF QuickCollect models
3. Confirm you are within range of your sensor.
now available!
• What is the IP rating of the sensor? CMDT 391-K-SL:
The SKF QuickCollect sensor is currently rated IP65. Standard Sensor
CMDT 391-PRO-K-SL:
• How do I order the SKF QuickCollect sensor?
Standard Sensor with carrying
Contact your Authorized SKF Distributor to order the SKF QuickCollect sensor
case and accessories
that is now available in four models. A standard or hazardous area sensor
with or without a carrying case and accessories. CMDT 391-EX-K-SL:
Hazardous Area Sensor
• What do I do if I am missing parts or need to order parts? CMDT 391-EX-PRO-K-SL:
Contact the industrial distributor where you purchased your sensor. Hazardous Area Sensor with
carrying case and accessories
• My magnet won’t stick to my asset, what can I do?
Confirm that the asset surface is magnetic. If the asset surface is not magnetic,
consider a magnetic mounting pad. If the sensor will not stick, hold the sensor
in place as needed.

• Is there a limit to the number of assets I can enter in the app or measure
with one sensor?
You can monitor an unlimited number of assets with one SKF QuickCollect sensor.

• Can asset setup fields be left blank if data is unknown?

Required fields are indicated by an asterisk in the app and must be entered for
proper analysis. Fields without an asterisk may be left blank. However, the more
information provided, the more accurate the analysis will be.
• How do I correct a mistake made when building an asset?
The app allows you to “Edit My Asset” (Go to “My Assets,” select the asset
in need of correction, then select “Edit Asset” and change as needed.)

• How are thresholds set?

Based on asset data entered in the SKF Pulse app, default thresholds for velocity alarms are
set to ISO standards. User can customize velocity alarm thresholds if desired.

• How do I know where to take measurements on my asset?

The app has an intuitive visual interface that guides users through the data collection process.

• How do I request an SKF Pulse Check?

Go to My Assets, select specific asset for which you have collected data to get asset
details screen and then select Request Pulse Check. Tap the button to send the request.
Data must be collected on an asset to submit an SKF Pulse Check.

• How is data analyzed?

Data is sent to an SKF remote diagnostic center where it is analyzed by a team of experts
via an SKF Pulse Check, available in the app. An SKF Pulse Check report will be sent
by the analyst in the SKF Pulse app within one business day advising corrective actions,
if required.

• How do I turn off my sensor?

Manual power off: Press and hold power button for 3+ seconds
Auto power off: After 15 minutes of no activity.

• Does SKF Pulse require a subscription? Four SKF QuickCollect models

The sensor is purchased through your Authorized SKF industrial distributor. now available!
The app can be downloaded from the Apple Store and Google Play free of charge.
CMDT 391-K-SL:
SKF offers a Basic and Advanced subscription package, after a 30-day Free Trial.
Standard Sensor
Learn more.
CMDT 391-PRO-K-SL:
• How do I reach technical support? Standard Sensor with carrying
You can submit your support request via the Pulse app under Settings or online case and accessories
at www.skf.com/cm/tsg. Once your support case is submitted, a technician will
CMDT 391-EX-K-SL:
contact you ASAP to begin working on your issue. For urgent issues, please
Hazardous Area Sensor
call 1-800-523-7514 or 1-858-496-3627.
CMDT 391-EX-PRO-K-SL:
• What is the warranty for the QuickCollect sensor? Hazardous Area Sensor with
The SKF QuickCollect sensor comes with a one year warranty covering carrying case and accessories
manufacturing defects.

• What do I need to know about sensor calibration?

The SKF QuickCollect sensor calibration certification is valid for two years after
the first use. Please contact [email protected] for re-certification.

For more information, contact your SKF Representative, email [email protected] or visit skfusa.com/skfpulse.

skf.com | skfusa.com/skfpulse
® SKF is a registered trademark of the SKF Group.

© SKF Group 2019

The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of
the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.
PUB 100-696 · July 2021