QUESTION BOOKLET SERIES A SUBJECT CODE XX

a
Do not open this question booklet until asked to do so.

INSTRUCTIONS TO CANDIDATE

1. Fill up the necessary information in the space provided on the cover of Question Booklet and the
Answer Sheet before commencement of the test.
2. The duration of the test is X Hour. There are 15 questions.
3. You will not be allowed to leave the examination hall till the exam gets completed.
4. This booklet contains X Pages. Please check for completeness of the Question Booklet
immediately after opening.
5. No spare Question Booklet or Answer Sheet will be provided. Do not make mistakes.
Replacement will NOT be provided under any circumstances.
6. Each question has four answer options marked (A), (B), (C) and (D). Answers are to be marked on
the Answer Sheet, which is provided separately.
7. Choose the most appropriate answer option and darken the circle completely, corresponding to
(A), (B), (C) or (D) against the relevant question number.
8. Use only Blue/Black Ball Point Pen to darken the circle for answering.
9. Please do not darken more than one circle against any question, as scanner will read such
marking as wrong answer.
10. Once an oval is darkened as answer to the question, it is final. Answers option once darkened
cannot be changed.
11. Each question carries one mark. There is NO Negative Marking.
12. Rough work, if any, is to be done on the Question Booklet only. No separate sheet will be
provided/used for rough work.
13. Calculator, Mobile, etc., are not permitted inside the examination hall.
14. Candidates seeking, receiving and/or giving assistance during the test will be disqualified.
15. Do not seek clarification on any item in the Question Booklet from the test invigilator. Use your
best judgment.

THIS QUESTION BOOKLET AND OMR ANSWER SHEET ARE TO BE RETURNED ON COMPLETION OF THE TEST.

Please fill in the following details using ball point pen.

Roll No.

Name _________________________ Signature _______________

Page 1 of 5
 PART-I
(Questions 1 – 05)

1. They built this temple 3,000 years ago. This must ______ a great civilization.
A. not have been B. was
C. has been D. have been

2. Ctrl, Shift और Alt को ______ कघुंजग कहा जाता है । / Ctrl, Shift and Alt are called ______ keys.
A. मॉडगफायर / modifier B. फुंक्शन / function
C. एल्फान्यङमिकरक / alphanumeric D. एडजस्टमं ट / adjustment

3. यदद परसोुं बघधवार है , तो परसोुं सि तगन ददन पहलि कौन सा ददन था? / If the day after tomorrow is a
Wednesday, what day was it three days before the day before yesterday?
A. बघधवार/ Wednesday B. सोमवार / Monday
C. शदनवार / Saturday D. रदववार / sunday

4. अगर ब्रिड को टोस्ट दकया जाएगा और उस पर मि योनि ज़ लगा दग जाए तो या तो मैं भङ खा रह जाऊुंगा या मघ झि
एदसदडटग हो जाएगग। भङख लगग है इसदलए रोटग टोस्ट कर लग। / If the bread is toasted and
mayonnaise is spread on it then either I will go hungry or I will have acidity. I am hungry so
the bread was toasted.
A. सत्य / True B. असत्य / False
C. शायद / Maybe D. अप्रासुंदगक / Irrelevant

5. एक तस्वगर कग ओर इशारा करति हुए, एक आदमग नि कहा, "मि रा कोई भाई नहगुं है, और इस आदमग का दपता
मि रि दपता का बिटा है ।" वह फोटो दकसकग थग? / Pointing to a photograph, a man said, "I have no
brother, and that man's father is my father's son. "Whose photo, was it?
A. उसका बिटा / His son B. अपनि हग / His own
C. उनकि दपता / His father D. उसका भतगजा / His nephew

Page 2 of 5
 PART-II
(Questions 6 – 15)

6. दनम्नदलखखत मं सि कौन-सा तापमान मापनि वाला तत्व है? / Which of the following is a temperature
measurement element?
A. थमोकपल / Thermocouple B. प्रिशर गॉज / Pressure gauge
C. फ्लो मगटर / Flow meter D. टै कोमगटर / Tachometer

7. एक प्रिशर ट् ाुं समगटर का क्या कायय होता है ? / What is the function of a pressure transmitter?
A. प्रवाह को मापनि कि दलए / To measure flow
B. तापमान मापनि कि दलए / To measure temperature
C. दबाव मापनि कि दलए / To measure pressure
D. स्तर मापनि कि दलए / To measure the level

8. दनम्नदलखखत मं सि कौन तरुं गरूपोुं वालि दवद् यघत सुंकितोुं कि दलए एक माप उपकरण है ? /
Which of the following is a measurement tool for electrical signals with waveforms?
A. ऑदसलोस्कोप / Oscilloscope B. मल्टगमगटर / Multimeter
C. क्लैंप मापग / Clamp Meter D. हाटय / HART

9. दनम्नदलखखत मं सि कौन-सा उपकरण आर्द्यता मापनि कि दलए उपयोग दकया जाता है? /
Which of the following is a tool used to measure humidity?
A. आर्द्यतामापग / Hygrometer B. थमोकपल / Thermocouple
C. प्रिशर गॉज / Pressure gauge D. टै कोमगटर / Tachometer

10. हॉल इफिक्ट दडवाइस का उपयोग दनम्न कि दलए दकया जा सकता है : / Hall effect device can be used
to:
A. तात्कादलक आधार पर एक दसग्नल को दङ सरि दसग्नल सि दवभादजत करनि
Divide one signal by another on an instantaneous basis
B. दो दसग्नल जोड़नि / Add two signals
C. दो दसग्नलोुं को को गघणा करनि / Multiply two signals
D. एक दसग्नल को दङ सरि सि घटानि / Subtract one signal from another

11. डि टा लॉगर का कायय क्या है? / What is the function of a data logger?
A. डि टा का दवश्लिषण करनि कि दलए / To analyse data
B. वोल्टि ज मापनि कि दलए / To measure voltage
C. वोल्टि ज करकॉडय करनि कि दलए / To record voltage
D. डि टा करकॉडय और स्टोर करनि कि दलए / To record and store data

Page 3 of 5
12. एक साइनसोइडल फोदसिंग फुंक्शन कि दलए दङ सरि क्रम प्रणालग कग आवचदि प्रदतदक्रया का चरण अुंतराल
(फिज लॉग): / Phase lag of the frequency response of a second order system to a sinusoidal
forcing function:
A. 30° है / is 30°
B. अदधकतम 90° है / is 90° at the most
C. स्पशोन्मघख रूप सि 180° तक पहुुं चता है / approaches 180° asymptotically
D. 120° है / is 120°

13. _______ तापमान स्किल 'बफय दबुंदघ' को 0° और 'भाप दबुंदघ' को 80° दनददय ष्ट करता है । /
_______ temperature scale assigns 0° to the ‘ice point’ and 80° to the ‘steam point’.
A. सिखियस / Celcius B. रैं दकन / Rankine
C. रि उमघ र / Reumur D. फारि नहाइट / Fahrenheit

14. प्रदतकङल एदसड और क्षार कग प्रवाह दर माप सबसि उपयघक्त रूप सि दनम्न कि द्वारा कग जा सकतग है : / Flow
rate measurement of hostile acids and alkalis can be most suitably done by a/an:
A. वंचघरगमगटर / Venturimeter
B. दिर्द्मापग / Orificemeter
C. हॉट वायर एनगमोमगटर / Hot wire anemometer
D. चघुंबकगय प्रवाह मगटर / Magnetic flow meter

15. दनधाय करत दबुंदघ मं पकरवतयन कि दलए एक रै खखक दनयुंत्रण प्रणालग कग प्रदतदक्रया को ______ कहा जाता है। /
Response of a linear control system for a change in set point is called ______.
A. आवचदि प्रदतदक्रया / frequency response B. क्षदणक प्रदतदक्रया / transient response
C. सवो समस्या / servo problem D. दनयामक समस्या / regulator problem

Page 4 of 5
Rough Work

Page 5 of 5