Scribd
Upload
30 views

NFC101

Uploaded by

nunocoito
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
30 views

NFC101

Uploaded by

nunocoito
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 14

DOCUMENTATION

PCB ASSY

A006281 - 02

NFC 101

DN Doc. name Designed: Valid from: Valid until: Doc. no: Edition: Page
6719 PCB assy Note Feed Controller NFC 101 ANn/ÅEn 01-09-19 --- D017264 01 1/14
 
Table of contents
1 References................................................................................................................................2
2 PCB Assy Revision History.....................................................................................................3
3 Schematics................................................................................................................................4
4 Component Placement..............................................................................................................6
5 Test Point Drawing...................................................................................................................7
6 PCB Drawing............................................................................................................................8
6.1 PCB Requirements...................................................................................................................9
7 Parts list..................................................................................................................................10
8 Functional / Test Specification...............................................................................................14
9 PCB Assy marking.................................................................................................................14
9.1 Label dimensions....................................................................................................................14
9.2 Label placement......................................................................................................................14
9.3 Label requirements.................................................................................................................14

1 References

Documents
Type File name
Schematics D012474_02.EDB
Lay-out D012474_02.EDB
Manufacture document D012477_01.ZIP
Alternative components D012014.DOC
Firmware program D015391_01.HEX
Internal Interface Specification Applicable parts of
(With recommended test procedure) D015647.DOC
Software Environment D015390_01.DOC
Description (SED)

Parts
Type Part no Issue
PCB Assy A006281 02
PCB A006280 01
FW-kit 2006-04.01 A007439 01

NOTE: This board A006281 is included in the Module NFC 101 A007448

DN Doc. name Designed: Valid from: Valid until: Doc. no: Edition: Page
6719 PCB assy Note Feed Controller NFC 101 ANn/ÅEn 01-09-19 --- D017264 01 2/14
 
2 PCB Assy Revision History

DN Doc Issue Date Change Issued by


6719 01 01-09-19 New Document. (Putting together different documents) ÅEn
R89 change to 100k and C66 change to 10nF (Vref for CRR motor current)

DN Doc. name Designed: Valid from: Valid until: Doc. no: Edition: Page
6719 PCB assy Note Feed Controller NFC 101 ANn/ÅEn 01-09-19 --- D017264 01 3/14
 
3 Schematics
4 Component Placement
5 Test Point Drawing
6 PCB Drawing
6.1 PCB Requirements

Manufacturing shall comply with PERFAG 3C

PCB part nr A006280 Issue 01


Photoplot files D012477
NC drill file D012477
Artwork list file D012477
Used apertures D012477

PERFORMANCE
o Single-sided  Solder mask
o Double-sided  Insulation mask
 Multilayer o White component notation

4 No. of layers (multilayer)

BASE MATERIAL
FR-4 Epoxy glassfibre. Material shall comply with UL-94V-0 requirements.
1.6 mm thickness of the Laminate.

FINISH
xCopper plated holes and pattern (Min 25 µm copper in holes)
35 µm Min. copper thickness on finished board.
xSolder coating and Hot-air levelling.

MECHANICAL TOLERANCE (TOLERANCE IN MM)


Outline relative to reference hole in pattern tol. ±0.2
Outline unless otherwise specified tol. ±0.3
Hole displacement relative nom. location tol. 0.05
Hole displacement for big holes >4,5 mm tol. 0.20
HOLE DIMENSIONS (REFER TO FINISHED HOLES)
Hole Hole dim. Tolerance Plated Number
(Tool) mm yes no
PATCH 0
01 0.5 ±0.10 X 243
02 0.8 ±0.10 X 37
03 0.9 ±0.10 X 52
04 1.1 ±0.10 X 6
05 2.0 ±0.10 X 2
06 3.2 ±0.10 X 4
PATCH 6
01 0.5 ±0.10 X 45

MARKING (TO BE MADE ON THE SECONDARY SIDE)


The PCB shall be marked with UL-approved manufactures mark.
The PCB shall also be marked with manufacturers mark, manufactured year and week.
7 Parts list

Line Pos Description Case / Format Manufacture Manufacture ID Comment


1 C01 CAP CER. 1nF 10% 50V 0805 NP0 RC0805
2 C02 CAP CER. 1nF 10% 50V 0805 NP0 RC0805
3 C03 CAP CER. 100nF 20% 50V 0805 X7R RC0805
4 C04 CAP CER. 10nF 20% 50V 0805 X7R RC0805
5 C05 CAP CER. 100nF 20% 50V 0805 X7R RC0805
6 C06 CAP CER. 10nF 20% 50V 0805 X7R RC0805
7 CAP.ELYT 100uF 6V3 ±20% 105C° 1000h 6.3 x
C07 5.4mm CEY5_6
8 C08 CAP CER. 470pF 10% 50V 0805 NP0 RC0805
9 C09 CAP CER. 470pF 10% 50V 0805 NP0 RC0805
10 C10 CAP CER. 470pF 10% 50V 0805 NP0 RC0805
11 C11 CAP CER. 470pF 10% 50V 0805 NP0 RC0805
12 C12 CAP CER. 470pF 10% 50V 0805 NP0 RC0805
13 C13 CAP CER. 470pF 10% 50V 0805 NP0 RC0805
14 C14 CAP CER. 100nF 20% 50V 0805 X7R RC0805
15 C16 CAP CER. 10nF 20% 50V 0805 X7R RC0805
16 C17 CAP CER. 10nF 20% 50V 0805 X7R RC0805
17 C18 CAP CER. 10nF 20% 50V 0805 X7R RC0805
18 C19 CAP CER. 100nF 20% 50V 0805 X7R RC0805
19 C20 CAP CER. 10nF 20% 50V 0805 X7R RC0805
20 C21 CAP CER. 10nF 20% 50V 0805 X7R RC0805
21 C22 CAP CER. 10nF 20% 50V 0805 X7R RC0805
22 C23 CAP CER. 10nF 20% 50V 0805 X7R RC0805
23 C24 CAP CER. 100nF 20% 50V 0805 X7R RC0805
24 C25 CAP CER. 100nF 20% 50V 0805 X7R RC0805
25 C26 CAP CER. 100nF 20% 50V 0805 X7R RC0805
26 C27 CAP CER. 10nF 20% 50V 0805 X7R RC0805
27 C28 CAP CER. 10nF 20% 50V 0805 X7R RC0805
28 C29 CAP CER. 10nF 20% 50V 0805 X7R RC0805
29 C30 CAP CER. 100nF 20% 50V 0805 X7R RC0805
30 C31 CAP.ELYT 47uF 50V ±20% 105C° 1000h 8 X 10 mm CEY10_10 SMD,vertical
31 C32 CAP CER. 1nF 10% 50V 0805 NP0 RC0805
32 C33 CAP CER. 100nF 20% 50V 0805 X7R RC0805
33 CAP.ELYT 470uF 16V ±20% 105C° 1000h 10 X 10.2
C34 mm CEY8_6
34 C35 CAP ELYT 47uF/6V3 ±20% 105C° 1000h 5.0 X 5.4mm CEY5_6
35 C36 CAP CER. 100nF 20% 50V 0805 X7R RC0805
36 C37 CAP CER. 1nF 10% 50V 0805 NP0 RC0805
37 C38 CAP CER. 100nF 20% 50V 0805 X7R RC0805
38 C39 CAP CER. 330pF 10% 50V 0805 NP0 RC0805
39 C40 CAP CER. 100nF 20% 50V 0805 X7R RC0805
40 C41 CAP CER. 100nF 20% 50V 0805 X7R RC0805
41 C42 CAP CER. 100nF 20% 50V 0805 X7R RC0805
42 C43 CAP CER. 100nF 20% 50V 0805 X7R RC0805
43 C44 CAP CER. 100nF 20% 50V 0805 X7R RC0805
44 C45 CAP CER. 1nF 10% 50V 0805 NP0 RC0805
45 C46 CAP CER. 100nF 20% 50V 0805 X7R RC0805
46 C47 CAP CER. 22pF 5% 50V 0805 NP0 RC0805
47 C48 CAP CER. 22pF 5% 50V 0805 NP0 RC0805
48 C49 CAP CER. 100nF 20% 50V 0805 X7R RC0805
49 C50 CAP CER. 100nF 20% 50V 0805 X7R RC0805
50 C51 CAP CER. 100nF 20% 50V 0805 X7R RC0805
51 C52 CAP CER. 100nF 20% 50V 0805 X7R RC0805
52 C53 CAP CER. 100nF 20% 50V 0805 X7R RC0805
53 C54 Not mounted
Line Pos Description Case / Format Manufacture Manufacture ID Comment
54 C55 CAP CER. 100nF 20% 50V 0805 X7R RC0805
55 C56 CAP CER. 330pF 10% 50V 0805 NP0 RC0805
56 C57 CAP CER. 100nF 20% 50V 0805 X7R RC0805
57 C58 CAP CER. 470pF 10% 50V 0805 NP0 RC0805
58 C59 CAP CER. 470pF 10% 50V 0805 NP0 RC0805
59 C60 CAP CER. 470pF 10% 50V 0805 NP0 RC0805
60 C61 CAP CER. 1nF 10% 50V 0805 NP0 RC0805
61 C62 CAP CER. 1nF 10% 50V 0805 NP0 RC0805
62 C63 CAP CER. 100nF 20% 50V 0805 X7R RC0805
63 C64 CAP CER. 100nF 20% 50V 0805 X7R RC0805
64 C65 CAP CER. 100nF 20% 50V 0805 X7R RC0805
65 C66 CAP CER. 100nF 20% 50V 0805 X7R RC0805
66 C67 CAP CER. 10nF 20% 50V 0805 X7R RC0805
66 C68 CAP CER. 470pF 10% 50V 0805 NP0 RC0805
68 C69 CAP CER. 100nF 20% 50V 0805 X7R RC0805
69 C70 CAP CER. 100nF 20% 50V 0805 X7R RC0805
70 D1 DIODE 2A 100V BYD77D SOD-87 SOD-87 PHILIPS BYD77D
71 D2 DIODE DUAL SWITCH 0.1A 70V BAV99 SOT-23 SOT-23 PHILIPS BAV99
72 D3 DIODE DUAL SWITCH 0.1A 70V BAV99 SOT-23 SOT-23 PHILIPS BAV99
73 D4 DIODE DUAL SWITCH 0.1A 70V BAV99 SOT-23 SOT-23 PHILIPS BAV99
74 D5 DIODE DUAL SWITCH 0.1A 70V BAV99 SOT-23 SOT-23 PHILIPS BAV99
75 D6 DIODE DUAL SWITCH 0.1A 70V BAW56 SOT-23 SOT-23 PHILIPS BAW56
76 D7 DIODE DUAL SWITCH 0.1A 70V BAW56 SOT-23 SOT-23 PHILIPS BAW56
77 IC01 IC DC MOT DRV. A3952SEB PLCC-28 PLCC28 Allegro A3952SEB
78 IC02 IC RS485 T/R LTC485CS8 SO-8 SOIC8 LINEAR TECH LTC485CS8
79 IC03 IC Low drop 5V/150mA Reg TLE4269GL SOIC20 SIEMENS Q67006-A9192
80 IC04 IC QUAD OP-AMP. LM324 SO-14 SOIC14 TEXAS LM324D
81 IC05 IC RS485 T/R LOW PWR,EMI LTC1483CS8 SO-8 SOIC8 LINEAR TECH. LTC1483CS8
82 IC06 IC QUAD COMP LM339 SO-14 SOIC14 TEXAS LM339D
83 IC07 IC QUAD COMP LM339 SO-14 SOIC14 TEXAS LM339D
84 IC09 IC MCU 8-bit with CAN C505CA-4EM P-MQPF-44-2 P-MQPF-44-2 SIEMENS C505CA-4EM Programmed before mounted on PCB. See doc. SED in A007439 FW-KIT
85 IC10 IC MOTOR DRV. PBL3717/2 PLCC 28 PLCC28 Ericsson PBL-3717/2QN
86 IC11 IC SPI SERIAL 256 x 8 NONVOLT.MEM SO-8 SOIC8 Atmel AT25020N-10SC
87 IC12 IC HEX CMOS INV. 74HC14 SO-14 SOIC14 PHILIPS 74HC14
88 IC13 IC MOTOR DRV. PBL3717/2 PLCC 28 PLCC28 Ericsson PBL-3717/2QN
89 IC14 IC QUAD OP-AMP. LM324 SO-14 SOIC14 TEXAS LM324D
90 J01 Connector AMP CT 5-pos box type vert. HMT white CCTVSTD5B AMP 175 487-5
91 J02 Connector AMP CT 4-pos box type vert. HMT white CCTVSTD4B AMP 175 487-4
92 J05 Connector AMP CT 5-pos box type vert. HMT white CCTVSTD5B AMP 175 487-5
93 Connector AMP MTA100 3-pos vert. Shrouded headers
J06 HMT white CMTA3B AMP 644 486-3
94 Connector AMP MTA100 3-pos vert. Shrouded headers
J07 HMT white CMTA3B AMP 644 486-3
95 J10 Connector AMP CT 2-pos box type vert. HMT yellow CCTVSTD2B AMP 4-175 487-2
96 J11 Connector AMP CT 6-pos box type vert. HMT white CCTVSTD6B AMP 175 487-6
97 J12 Connector AMP CT 15-pos box type vert. HMT white CCTVSTD15B AMP 1-175 487-5
98 R01 RES 10k 1% 0.1W 0805 RC0805
99 R02 RES 10k 1% 0.1W 0805 RC0805
100 R03 RES 2k7 1% 0.1W 0805 RC0805
101 R04 RES 2k7 1% 0.1W 0805 RC0805
102 R05 RES 24k 1% 0.1W 0805 RC0805
103 R06 RES 10k 1% 0.1W 0805 RC0805
104 R07 RES 2k7 1% 0.1W 0805 RC0805
105 R08 RES 2k7 1% 0.1W 0805 RC0805
106 R09 RES 47R 5% 0.25W 1206 RC1206
107 R10 RES 100k 1% 0.1W 0805 RC0805
108 R100 RES 4k7 1% 0.1W 0805 RC0805
109 R101 RES 10k 1% 0.1W 0805 RC0805
110 R102 RES 10k 1% 0.1W 0805 RC0805
Line Pos Description Case / Format Manufacture Manufacture ID Comment
111 R11 RES 1R2 5% 0.25W 1206 RC1206
112 R12 RES 1R2 5% 0.25W 1206 RC1206
113 R13 RES 1R2 5% 0.25W 1206 RC1206
114 R14 RES 1R5 5% 0.25W 1206 RC1206
115 R15 RES 47R 5% 0.25W 1206 RC1206
116 R16 RES 47k 1% 0.1W 0805 RC0805
117 R17 RES 1R0 5% 0.25W 1206 RC1206
118 R18 Not mounted
119 R19 RES 56k 1% 0.1W 0805 RC0805
120 R20 RES 1R5 5% 0.25W 1206 RC1206
121 R21 RES 47R 5% 0.25W 1206 RC1206
122 R22 RES 24k 1% 0.1W 0805 RC0805
123 R23 RES 24k 1% 0.1W 0805 RC0805
124 R24 RES 24k 1% 0.1W 0805 RC0805
125 R25 RES 4k7 1% 0.1W 0805 RC0805
126 R26 RES 100R 5% 0.1W 0805 RC0805
127 R27 RES 24k 1% 0.1W 0805 RC0805
128 R28 RES 1R5 5% 0.25W 1206 RC1206
129 R29 RES 1R2 5% 0.25W 1206 RC1206
130 R30 RES 10k 1% 0.1W 0805 RC0805
131 R31 RES 10k 1% 0.1W 0805 RC0805
132 R32 RES 56k 1% 0.1W 0805 RC0805
133 R33 RES 10k 1% 0.1W 0805 RC0805
134 R34 RES 10k 1% 0.1W 0805 RC0805
135 R35 RES 10k 1% 0.1W 0805 RC0805
136 R36 RES 10k 1% 0.1W 0805 RC0805
137 R37 RES 100R 5% 0.1W 0805 RC0805
138 R38 RES 2k7 1% 0.1W 0805 RC0805
139 R39 RES 27R 1% 0.1W 0805 RC0805
140 R40 RES 47R 5% 0.25W 1206 RC1206
141 R41 RES 47R 5% 0.25W 1206 RC1206
142 R42 RES 100R 5% 0.1W 0805 RC0805
143 R43 RES 56k 1% 0.1W 0805 RC0805
144 R44 RES 10k 1% 0.1W 0805 RC0805
145 R45 RES 10k 1% 0.1W 0805 RC0805
146 R46 RES 10k 1% 0.1W 0805 RC0805
147 R47 RES 10k 1% 0.1W 0805 RC0805
148 R48 RES 10k 1% 0.1W 0805 RC0805
149 R49 RES 10k 1% 0.1W 0805 RC0805
150 R50 RES 10k 1% 0.1W 0805 RC0805
151 R51 RES 10k 1% 0.1W 0805 RC0805
152 R52 RES 47R 5% 0.25W 1206 RC1206
153 R53 RES 10k 1% 0.1W 0805 RC0805
154 R54 RES 68k 1% 0.1W 0805 RC0805
155 R55 RES 24k 1% 0.1W 0805 RC0805
156 R56 RES 10k 1% 0.1W 0805 RC0805
157 R57 RES 10k 1% 0.1W 0805 RC0805
158 R58 RES 24k 1% 0.1W 0805 RC0805
159 R59 RES 47k 1% 0.1W 0805 RC0805
160 R60 RES 24k 1% 0.1W 0805 RC0805
161 R61 RES 47R 5% 0.25W 1206 RC1206
162 R62 RES 100k 1% 0.1W 0805 RC0805
163 R63 RES 47k 1% 0.1W 0805 RC0805
164 R64 RES 100k 1% 0.1W 0805 RC0805
165 R65 RES 10k 1% 0.1W 0805 RC0805
166 R66 RES 10k 1% 0.1W 0805 RC0805
167 R67 RES 47R 5% 0.25W 1206 RC1206
168 R68 RES 10k 1% 0.1W 0805 RC0805
169 R69 RES 47k 1% 0.1W 0805 RC0805
Line Pos Description Case / Format Manufacture Manufacture ID Comment
170 R70 RES 10k 1% 0.1W 0805 RC0805
171 R71 RES 10k 1% 0.1W 0805 RC0805
172 R72 RES 10k 1% 0.1W 0805 RC0805
173 R75 RES 47k 1% 0.1W 0805 RC0805
174 R78 RES 24k 1% 0.1W 0805 RC0805
175 R79 RES 27R 1% 0.1W 0805 RC0805
176 R80 RES 10k 1% 0.1W 0805 RC0805
177 R81 RES 68k 1% 0.1W 0805 RC0805
178 R82 RES 2k7 1% 0.1W 0805 RC0805
179 R83 RES 2k7 1% 0.1W 0805 RC0805
180 R84 RES 2k7 1% 0.1W 0805 RC0805
181 R85 RES 10k 1% 0.1W 0805 RC0805
182 R86 RES 2k7 1% 0.1W 0805 RC0805
183 R87 RES 2k7 1% 0.1W 0805 RC0805
184 R88 RES 2k7 1% 0.1W 0805 RC0805
185 R89 RES 100k 1% 0.1W 0805 RC0805
186 R91 RES 10k 1% 0.1W 0805 RC0805
187 R92 RES 1k 1% 0.1W 0805 RC0805
188 R93 RES 1k 1% 0.1W 0805 RC0805
189 R94 RES 4k7 1% 0.1W 0805 RC0805
190 R96 RES 18k 1% 0.1W 0805 RC0805
191 R97 RES 3K3 1% 0.1W 0805 RC0805
192 R98 RES 2k7 1% 0.1W 0805 RC0805
193 R99 Not mounted
194 T1 TRANS. NPN 1A 45V BCP54-16 SOT-223 SOT-223 PHILIPS BCP54-16, BCP55-16,BCP56-16
195 T2 TRANS. NPN 1A 45V BCP54-16 SOT-223 SOT-223 PHILIPS BCP54-16, BCP55-16,BCP56-16
196 T3 TRANS DUAL P-MOSFET SI9948 SO-8 SOIC8
197 T4 TRANS. PNP 1A 45V BCP51-16 SOT-223 SOT-223 PHILIPS BCP51-16, BCP52-16,BCP53-16
198 T6 TRANS. NPN 0.5A 45V BC817-25 SOT-23 SOT-23 PHILIPS BC817-25, BC817-40
199 T7 TRANS. NPN 0.5A 45V BC817-25 SOT-23 SOT-23 PHILIPS BC817-25, BC817-40
200 X1 XTAL 14.7456MHz SMD 86SMX 86SMX DAISHINKU DMX-38 14.7456MHz
201 Z2 DIODE ZENER 3V6 2.3W BZD27-C3V6 SOD-87 SOD-87 PHILIPS BZD27-C3V6/T1
202 Z4 DIODE ZENER 3V6 2.3W BZD27-C3V6 SOD-87 SOD-87 PHILIPS BZD27-C3V6/T1
8 Functional / Test Specification

According to applicable parts of “Internal Interface Specification” for the board CMC 101 D015647.
See chapter 3.14 to 3.22 for function description and recommended test-procedure

9 PCB Assy marking


The PCB assy shall be added with a label on the rear side. The label shall have following information:
 Part number: A007448
 Revision number: yy
 Serial number: zzzzz

Note: The above part number is for the module NFC 101with the module revision number.

9.1 Label dimensions

9.2 Label placement


The label shall be placed on the rear side of the board. See drawing D015145 (NFC 101 assy)

9.3 Label requirements


 Substrate colour: White or Yellow
 Text colour: Black
 Adhesive: For permanent use and non aggressive.

You might also like