Effy RingSizerGuide
Effy RingSizerGuide
mm 0 10 20 30 40 50
in 0 1 2
Before printing this page, make certain changes to your print dialog box:
• Uncheck the “fit to page” option
• Set the page scaling to “none” or set custom scaling to “100%”
To confirm that the page is properly sized, measure the “2 in” and “50 mm”
reference images with a ruler. If they do not match exactly, the ring size
measurements will be inaccurate.
3
choose the one that works best for you.
4
5
6
7
LINEAR RING SIZER
8
13 12 11 10 9
Before you cut this sizer, place a piece of clear tape over the entire image to provide strength
and allow for a more precise measurement. Then, cut out the image. With a straight edge razor,
carefully cut the indicated slot across the dotted line. Insert the end of the sizer into the slot,
so that the numbers are on the outside of the circle. Place the sizer on the intended finger at
the widest point and pull the tab through the slot until the sizer is snug. Make certain it can
still slip over the knuckle of the finger. The number that lines up with the slit is your ring size.
SIZE 5.5 SIZE 6 SIZE 6.5 SIZE 7 SIZE 7.5 SIZE 8 SIZE 8.5 SIZE 9 SIZE 9.5
16.0mm 16.45mm 16.9mm 17.3mm 17.7mm 18.6mm 18.8mm 19mm 19.4mm
SIZE 10 SIZE 10.5 SIZE 11 SIZE 11.5 SIZE 12 SIZE 12.5 SIZE 13 SIZE 13.5
19.8mm 20.2mm 20.6mm 21.0mm 21.4mm 21.8mm 22.2mm 22.6mm
Things to Remember
Measure warm hands for an accurate size when using the linear guide. The best time is normally early evening.