LINK BOX WIRING INSTRUCTIONS

BMV-600
Battery Monitor
Mag latch
SYSTEM MONITORING DC SYSTEM CONTROL battery
DC MONITORING SHORE 1 isolator D B
DRUM Indicatie led
volts amps CONTROL
Indicatie led

888 888
Indicatie led

charge SHORE 2
DRUM
CONTROL
This is not a VE.Net connector
discharge

battery iso switch

MAIN
HYD.
PACK Fuse and
Main supply OK Battery connection
reversed if lit
A
supply test

domestic start on off

PORT
CAPSTAN Fuse 1 OK C I+ (c) shunt - bat end
phoenix

09
E
AC MONITORING STBD.
I- (d) shunt + load end Multicompact 12/1200/50
B
CAPSTAN
E
volts amps

Shunt +VS (e) voltage sense

888 888
Hier staat in verschillende talen wat Hier staat in verschillende talen wat
E de functie van de blauwe kast is de functie van de blauwe kast is

SHORE 1 Fuse 2 OK LITTLEFUSE

DRUM
CONTROL MEGA -VS voltage sense Hier staat in verschillende talen wat
de functie van de blauwe kast is
Hier staat in verschillende talen wat
de functie van de blauwe kast is
E
100A
SHORE 2
+ (g) +VE supplyE
DRUM
CONTROL
shore avail shore in use gen in use
- (f) -VE supply
E
MULTI PLUS CONTROL Fuse 3 OK
MAIN
HYD.
LITTLEFUSE
MEGA
Battery + Multi voltage sense
-
PACK
16
E
12 20 200A
inverter on
overload
mains on
bulk 8 24 PORT
connection - Multi voltage sense
CAPSTAN
E
low battery absorp 4 28
Mag latch batt. isolator
temperature float
E
0 30 STBD.
shore CAPSTAN Fuse 4 OK LITTLEFUSE
Mag latch batt. isolator
current
limiter MEGA E
300A
Battery 2 +
SHORE 1
DRUM
CONTROL
E
Voltage Sense
on off charger only off on

PANEL CONTROL
lights
Fuse 5 OK LITTLEFUSE connections
MEGA
300A

A Negative
returns

Battery
+
connection

DC Link Box - 5 way

Alternator

Cyrix battery
Starter
separator
Motor

A ESP System Panel (available separately)

B BMV-600 connection to DC Link Box via RJ12 cable
C Voltage sense cable for starter battery.
Only required if using System Panel.
Starter Battery Service Battery
D Mag latch contactor for battery isolation (available separately).
Operated by control on System Panel
Only required if using System Panel.