Scribd
Upload
15 views

OSPF

Uploaded by

palmari.v0511
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
15 views

OSPF

Uploaded by

palmari.v0511
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Why is HSRP mandatory?

The Karnataka government has been implementing the High Security Registration Plate
(HSRP) mandate to enhance vehicle security and streamline registration processes in
the region.

HSRP configuration?

HSRP allows multiple routers on a single LAN to share a virtual IP and MAC address
which is configured as the default gateway on the hosts. From the group of routers
configured in an HSRP group, there is one router elected as the active router and
another as a standby router.

Question 4. What Is Cleanup Rule In Checkpoint Firewall?

Answer :

Cleanup rule are placed at last of the security rule base, Its used to drop all traffic
which not match with above rule and Logged. Cleanup rule mainly created for log
purpose. In this rule administrator is going to denied all the traffic and enable log.

Networking Tutorial
Question 5. What Is Nat?

Answer :

Sensitivity Label: General


NAT stand for Network Address Translation. here private IP address are mapped with
Public IP Address and Public IP address map with Private IP Address. Mainly its used for
offer Security to the private Network and Servers from Internet. NAT is also for to
connect Internet with Private IP Address. Because Private IP not route able on Internet.
Question 6. What Is Source Nat?

Answer :

Source NAT is for initiate traffic from internal network to external network. In the
source NAT only source IP will translated in public IP address.

Question 7. What Is Vpn (virtual Private Network)?

IP Sec (IP Security) is nothing but set of protocol. which is for make secure
communication between two host machine, or network over public network such as
Internet. IPSec is for Confidentiality , Integrity, Authenticity and Anti Replay protection.
There is two IPSec protocol which provide security

settings before continuing with other firewall configuration tasks. You must perform
these initial configuration tasks either from the MGT interface, even if you do not plan
to use this interface for your firewall management, or using a direct serial connection
to the console port on the firewall.ESP (Encapsulation Security Payload)
AH (Authentication Header).

Question 1. Explain Esp And Ah Ipsec Protocol?

Answer :

ESP:ESP Protocol is nothing but the part of IPsec suit , Its provide Confidentiality,
Integrity and Authenticity. It is used in 2 mode
1. Transport mode
2.Tunnel mode.

AH: AH is the most important part of IPsec suit, Its provide only Authentication and
Integrity, Its does not provide Encryption. It is also used to two mode Transport mode
and Tunnel mode.

Question 10. What Is Explicit Rule In Checkpoint Firewall?

Answer :

Explicit rules are the rules which are created manually by network security
administrator .

Question 11. What Is Hide Nat?

Sensitivity Label: General


Answer :

Hide NAT is for translate multiple private IP or Network with single public IP address.
Means many to one translation. Its can be used in source NAT translation. we can not
use hide NAT while configuring Destination NAT.

Question 12. What Is Destination Nat?

Answer :
Destination NAT is nothing but when we need to translate Destination IP address with
internal private network from public IP address. Only static NAT is their in Destination
NAT.

Question 13. Difference Between Automatic Nat And Manual Nat?

Answer :

Automatic NAT:

Automatic created by Firewall Network Security Administrator


Can not modify
Can not create “No NAT” rule
Can not create Dual NAT
Port forwarding not possible
Proxy ARP by default enabled
Manual NAT:

Sensitivity Label: General

You might also like