Scribd
Upload
26 views

Footing Design

Uploaded by

markz.batara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views

Footing Design

Uploaded by

markz.batara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ISOLATED SQUARE FOOTING DESIGN

F-1
Input Parameters:
Concrete Strenght, fc' = 21 Mpa Longitudinal Bar, Ax = 12
16 mmØ
Rebar yield strength, fy = 275 Mpa Traverse Bar, Ay = 12
Net allowable Soil Pressure, qa = 95 kPa Loc X - dir dx = 0 m, 0 from center
Footing Embedment Depth, Df = 1.5 m Loc Y - dir dy = 0 m, 0 from center
Surcharge, qs = 0 kPa Depth, Cx = 0.25 m
Soil Weight, ws = 16 kN/m³ Width, Cy = 0.4 m
Footing Thickness, t= 0.4 m Load, Pd = 197.682 KN
Length, L= 2 m Load, Pl = 0 KN
Width, B= 2 m Moment X, Mx = 0 KNm
Clear Covering, c= 75 mm Moment Y, My = 0 KNm
Check Soil Bearing Capacity

Applied Load, Pd + Pl = 197.68


Surcharge, qs (LB) = 0.00
Weigth Footing, (23.5-ws) tBL= 12.00
Pn = 209.68 kN
Mx = 0 KNm My = 0 KNm
ex = 0.000 m L/6 = 0.333 m
ey = 0.000 m B/6 = 0.3333 m
P 6M < 95.00
qnx(max) = + = 52.42
BL L²B Pass!
P 6M < 95.00
qny(max) = + = 52.42
BL B²L Pass!

Check Thickness ; Two-way Shear Check One-way Shear; must, Vc > Vu

Applied Load, 1.2Pd + 1.6Pl = 237.22 Vux = qu B[(B-C)/2)-d] = 71.21 KN


Surcharge, 1.2 qs (LB) = 0.00 Vuy = qu L[(L-C)/2)-d] = 61.77 KN
Weigth Footing, 1.2(23.5-ws) tLB = 14.40 ØVcx = Ø 0.17 √fc' B d = 361.08 KN Pass!
Pu = 251.62 ØVcy = Ø 0.17 √fc' L d = 361.08 KN Pass!
Mx = 0 My = 0
ex = 0 ey = 0.00 Check Flexural Reinforcement; Asmin = 0.002Bt
L/6 = 0.33 L/6 = 0.3333
qumaxx = 62.9046 qumaxy = 62.9046 Kpa Mux = 48.16 KNm Muy = 40.26 KNm

d = 0.309 m Asx = 2412.74 mm² Asy = 2412.74 mm²


Vux = qu (BL-(Cx+d)(Cy+d)) = 226.69 KN Asmx = 1600.00 Asmy = 1600.00 mm²
Vuy = qu (BL-(Cx+d)(Cy+d)) = 226.69 KN
bo = 2(D1 + d) 2(W1 + d) = 2.536 m Sx = 150.7 Sy = 150.7 mm (Smax=450mm)
Ø Vc1 = Ø 0.33 √fc' bo d = 888.7765 KN Asx fy
ax = = 18.586 mm, ay= 18.59 mm
bc = Long/short side of column = 1.6 .85 fc B

Ø Vc2 = Ø( 1 + 2 ).17 √f'c bo d = 1030.2 KN Check Tension Contolled Limit Ø= 0.9


βc ab/d = 0.583 > ax/d & ay/d
αs = 40 ax/d = 0.060 ay/d = 0.060

Ø Vc2 = Ø(2+
αs d ) .083 √f'c bo d = 2173.93
βc ax ay
ØMnx = ØAsx fy(d- ) ØMny = ØAsy fy(d- )
2 2

ØMnx = 178.97 KNm, ØMny = 178.97 KNm


Ø Vc = min Ø Vc1 ,Ø Vc2,Ø Vc3 888.78 > 227
Pass! > Mu Pass! > Mu Pass!

Therefore use, 2x2x0.4m thick Footing with 16mmØ Tension Bar Grade (40) sp. @ 150.727272727273mm and 150mm 3
along BL respectively O.C.
3

You might also like