WEATHERCOAT GP

ELASTOMERIC WATERPROOFING

OVERVIEW PRODUCT GRADES/CODES

Weathercoat GP is a high quality, versatile, permanent waterproofing Resin 66210
system for roofs, facades, wet rooms and water retaining structures. Powder Grey 76110
The system will adhere to new and old surfaces of precast & in-situ Powder White 76115
concrete. Weathercoat GP has long-life flexibility and is ideally suited
for use in areas with extreme climatic conditions. It is applied by brush or spray and after drying can be
walked upon uncovered. After application the Weathercoat GP system has high resistance to atmospheric
pollution and UV light.

PROPERTIES PREPARATION OF SURFACE

Weathercoat GP is supplied as a two Ensure all dirt and foreign matter is cleaned off the
component, powder (cement based) and resin areas to be coated. Remove any ridges or form
(acrylic based) system, to be mixed on site. oil. Dusty or flaking surfaces must be cleaned
Different mixing ratios will produce compounds of thoroughly, then primed with Penetrating Primer
different degrees of flexibility, suitable for different Clear or Terrabond A (diluted1:3 with water).
purposes.
APPLICATION & CLEANING OF TOOLS
Weathercoat GP Resin Mix the components in the ratios shown in the
Is based on concentrated acrylic resins, highly table below. Add powder to resin and use a high
resistant to UV light and alkalinity. The system is speed mixer or power agitator until the mix is
permanently flexible and miscible with cement homogenous. If spraying, add enough water to
and cement based materials in all proportions. bring to the correct consistency. Apply using
Although developed as a high class brush, roller or spray. Leave minimum 6 hours
waterproofing system, it is very suitable as an between coats for drying. Mixed Weathercoat GP
additive to mortars and screeds to increase their must be used within 1 hour of mixing (do not
tensile, compressive and flexural strengths and retemper with additional water).
reduces their water cement ratio.
Mix Proportions
Weathercoat GP Powder Waterproof Waterproof Waterproof
Is based on special cements and precisely Uses Flexible Flexible Flexible
graded fillers, wetting and adhesion promoters. Coating Slurry Screed
Properties of the final mix will vary according to Weathercoat
GP Resin
1 1 1
the ratio of powder to resin.
Weathercoat
GP Powder
2 3 4
ADVANTAGES
 Permanent waterproofing Water - 0-0.1 0.1-0.2
 Abrasion resistant
 Non-toxic, ideal for water tanks Tools may be cleaned with water, ensure this is
 Weather resistant done within one hour of mixing of materials.
 High adhesion power
 Highly flexible HEALTH & SAFETY
 Vapour permeable
 Cement mortars adhere to it Avoid prolonged contact with eyes and skin. For
 Bridges cracks in substrates detailed information refer to relevant material
safety data sheet.
AREA OF USE
For waterproofing most building surfaces e.g. PACKAGING & STORAGE
roofs, facades, foundations, retaining walls, Weathercoat GP Resin is supplied in 5kg and 20kg
swimming pools, planters, wet room floors, water pails. Weathercoat GP Powder is supplied in 15kg
tanks, etc. and 25kg paper bags.

Store material in a clean dry area protected from

high humidity, moisture, direct sunlight and extreme
heat and cold. Unopened packs can be stored for
12 months. Use oldest material first.

For further details visit: www.terraco.com V. 09.2014 - Issued by Terraco Technical Centre, Ireland for Terraco UAE Ltd.
 WEATHERCOAT GP
ELASTOMERIC WATERPROOFING

TECHNICAL DATA
Product Two component cement acrylic elastomeric waterproofing system.
Binders Hydraulic (Weathercoat GP Powder) and organic (Weathercoat GP Resin).
Fillers Crushed, precisely graded filler (Weathercoat GP Powder).
Colour Grey and natural white (mixed Weathercoat GP).
Dilution With water if required.
Consumption 1.5-2.0kg/m2 for 1mm thick layer (mixed Weathercoat GP).
Drying Time 3 hours in normal conditions (mixed Weathercoat GP). Recoating time 6 hours.
Specific Gravity 1.70 ± 0.05 (mixed Weathercoat GP, 1 resin : 3 powder).
Weathercoat GP Resin : 5kg and 20kg jerricans.
Packaging Weathercoat GP Powder: 15kg and 25kg paper bags.
Weathercoat GP Kit : 20kg pail (5kg resin (jerrican) +15kg powder (bag)).
Storage 12 months in original unopened packs.

TERRACO offers a comprehensive range of products and services for most concrete and finishing needs.
Please contact the TERRACO Technical Service Department or your local TERRACO agent for further
information, samples, demonstrations and instructor services. The information given in this leaflet is based
upon laboratory research, as well as extensive field work and application. All products are sold subject to
standard conditions of sale which are available on request. This information is based on TERRACO’s present
state of knowledge and is intended to provide general information on TERRACO’s products and their
methods of use. The prospective user is recommended to determine the suitability of TERRACO’s suggestions
and products before adopting them on a commercial scale.

For technical enquiries please contact your nearest Terraco representative:

CHINA: PAKISTAN:
Terraco Architectural Coatings China Co., Ltd. Terraco Pakistan Pvt. Ltd. TURKEY:
Tel: +86 (0)20 8759 4742 Tel: +92 (0)42 3529 70 56-8 Terraco Yapi Malzemeleri Sanayi Ve Ticaret AS
Fax: +86 (0)20 8526 8056 Fax: +92 (0)42 3529 70 55 Tel: +90 (0)222 236 0423
E-mail: [email protected] Email: [email protected] Fax: +90 (0)222 236 0425
Web: www.terraco.com.cn Web: www.terraco.com E-mail: [email protected]
Web: www.terraco.com.tr
Terraco Chemical (Shanghai) Co., Ltd. RUSSIA:
Tel: +86 (0)21 621020 48 / 18 OOO Terraco Sweden Ltd, Russia UAE:
Fax: +86 (0)21 625205 47 Tel: +7 (0)495 9212 237 Terraco UAE Ltd
Email: [email protected] Fax: +7 (0)495 6273 881 Tel: +971 (0)4 326 2699
Web: www.terraco.com.cn E-mail: [email protected] Fax: +971 (0)4 326 2733
Web: www.terraco.ru E-mail: [email protected]
EGYPT: Web: www.terraco.com
Terraco Egypt Chemical Industries S.A.E. OOO Terraco Vostok Ltd
Tel: +20 (0)22 29184 53 / 57 / 58 Tel: +7 (0)4212 410563 UK:
Fax: +20 (0)22 29184 80 Fax: +7 (0)4212 410591 ADDAGRIP
E-mail: [email protected] E-mail: [email protected] Tel: +44 (0)1825 761 333
Web: www.terraco.com.eg Web: www.terraco.com Fax: +44 (0)1825 768 566
E-mail: [email protected]
JORDAN: SOUTH KOREA: Web: www.addagrip.co.uk / www,terraco.com
Jordan Swedish Polymers Industrial Corp. Terraco Korea Co., Ltd
Tel: +962 (0)6 553 8751 Tel: +82 (0) 2 5611 551 VIETNAM:
Fax: +962 (0)6 553 6560 Fax: +82 (0)2 5671 771 Terraco Vietnam Co., Ltd
E-mail: [email protected] E-mail: [email protected] Tel: +84 (0)650 3 820 100
Web: www.terraco.jo Web: www.terraco.co.kr Fax: +84 (0)650 3 820101
E-mail: [email protected]
IRELAND: THAILAND: Web: www.terraco.com
Terraco Technical Centre, Ireland Terraco Industry (Thailand) Limited
Tel: +353 (0) 404 66555 Tel: +66 (0)2 946 68 56 / 58
Fax: +353 (0) 404 66654 Fax: +66 (0)2 946 68 59
E-mail: [email protected] E-mail: [email protected]
Web: www.terraco.com Web: www.terraco.com

For further details visit: www.terraco.com V. 09.2014 - Issued by Terraco Technical Centre, Ireland for Terraco UAE Ltd.