Scribd
Upload
265 views1 page

Tricolene Hdi8965uv Tds English

Uploaded by

Alan Morais
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
265 views1 page

Tricolene Hdi8965uv Tds English

Uploaded by

Alan Morais
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HDI8965UV

High Density Polyethylene

PRODUCT DESCRIPTION
This type of HDPE is a homopolymer of ethylene with narrow unimodal MWD

PROCESSING METHODS CHARACTERISTICS APPLICATIONS


Injection Molding Excellent Stiffness Crates
UV Resistance Cases
Good Procesability Tote Boxes

RESIN PROPERTIES TEST METHOD VALUES, ENGLISH UNITS VALUES, INTERNATIONAL UNITS

Melt Flow Rate 2.16 kgf/190 °C MFR2 ASTM D1238 8.00 g/10 min 8.00 g/10 min
3 3
Density 23 °C ASTM D1505 0.965 g/cm 0.965 g/cm
UV Estabilizer --- Yes Yes
Antioxidant Package --- Yes Yes

MECHANICAL PROPERTIES TEST METHOD VALUES, ENGLISH UNITS VALUES, INTERNATIONAL UNITS

Tensile Strenght at Yield


ASTM D638 4,770 psi 33 MPa
23 ºC, 2.0 in/min (50,8 mm/min), Type IV compression molded plaque

Tensile Strenght at Break


ASTM D638 4,100 psi 28 MPa
23 ºC, 2.0 in/min (50,8 mm/min), Type IV compression molded plaque

Tensile Elongation at Yield


ASTM D638 6.1 % 6.1 %
23 ºC, 2.0 in/min (50,8 mm/min), Type IV compression molded plaque

Tensile Elongation at Break


ASTM D638 16.5 % 16.5 %
23 ºC, 2.0 in/min (50,8 mm/min), Type IV compression molded plaque

Flexural Modulus
Secant at 1 % of Elongation - 0,051 in/min (1,3 mm/min) ASTM D790A 256,500 psi 1,769 MPa
Secant at 2 % of Elongation - 0,051 in/min (1,3 mm/min) 214,700 psi 1,481 MPa
Izod Notched Impact Strength
ASTM D256 0.66 ft-lbf/in 35 J/m
23 °C, 1/8 in (3,2 mm)
Shore Hardness
ASTM D2240 68.0 68.0
Escala D, 15 s

OTHER PROPERTIES TEST METHOD VALUES, ENGLISH UNITS VALUES, INTERNATIONAL UNITS

Vicat Softennig Temperature - VST


ASTM D1525 262 °F 128 °C
10 N (1 kg), 50 °C/h
Heat Deflection Temperature - HDT
ASTM D648 179 °F 82 °C
66 psi (0,455 MPa), Method A

The data presented here is true and accurate to the best of our knowledge. Likewise, the values are nominal and should not be taken as minimum or maximum specifications. No warranty, express or
implied, is made regarding resin performance. The customer must validate these properties according to his own evaluations on his machine and in his laboratory.

REGULATORY COMPLIANCE
This resin complies with the following FDA regulation: 21 CFR 177.1520: Olefinic Polymers. This regulation describes polyolefin resins that can
be used safely for food packaging and preservation at low temperatures and at ambient temperatures. This resin is not designed for use in
medical applications and should not be used in such applications.

Revision 1: 2021-09-13

You might also like