Hybrid Network Digital Video Recorder (HVR) User Manual

Foreword

Notice:

Welcome to use our video recorder (HVR). For your safety, please read the manual carefully. Here

are the right method to use our HVR, preventing danger and the loss of your property. Please

follow when use it.

1. 1. Installation environment:

 Please place and use the HVR from 0℃-50℃.

 While install and use the HVR , it should be placed horizontally. Avoid tilt, and not invert.

 Avoid placing or installing in a high temperature, damp, dusty or smoking situation.

 HVR should not be suffered from the water-drop or water splash. Do not put something filled

with liquid like vase on it. Also, do not put other devices on it.

 To make sure the HVR cool properly, please install it in a well ventilated environment.

(cooling fan is installed inside)

 Please maintain a gap of 6CM or more between the back and the wall to cool fast during

installation.

 Please install the lightning arrester when use at high-lightning areas to avoid being damaged

by thunderstroke.

2. Notice ：

 Please do not touch the power switch with your wet hands or wet items to avoid the electric

shock.

 Make sure the product lying on the ground after finish installation. To avoid the video and

voice signal being disrupted, and damaging the product.

 Please make sure the stable power supply for HVR. Try to use stable voltage, less ripple

interference power to input. Do not disconnect the main switch to turn off HVR.

 Do not spill liquid or metal on HVR to avoid internal short circuit or fire.

 HVR does not include the hard disk, please install the hard disk correctly before use it. Or it

can not playback.

 HVR PCB board will cause short circuit after the dusts settle on damp. To make it work well

for long hours,

 Please use the brush to clear the dust regularly for the PCB board, accessory, inside

housing and the cooling fan.

 When shut down HVR, do not turn off the power switch directly. Please press the panel’s

-1-
 Hybrid Network Digital Video Recorder (HVR) User Manual
shutdown button to make HVR power off automatically to avoid damaging the hard disk.

 HVR system supports formatting function. If the hard disk is already used, please note the

formatting. Please format the hard disk when first use our HVR, or it causes error.

 Do not open the housing while HVR is working.

 To ensure the video integrity, please change the hard disk timely when it breaks down.(there

is wrong record about the hard disk). Or use HardDiskSentinel to check the hard disk by

computer.

2. 3. Description:

 Please comply with the actual instrument. The instruction is for reference only.

 HVR version updates in time. Please understand there is no any notice if update.

 Please contact our technology department for the newest program and supplementary

documentation.

 Our company has the final power of interpretation if there is doubt or controversy in the

product description,

This instruction is provided for a number series products for reference. So, the specific

management won’t be listed one by one. If any questions, please contact our technology

department.
 目录
Chapter 1 Product Introduction ....................................................................... 7
1.1 Product Overview ....................................................................................... 7
1.2 Main Functions ........................................................................................... 7
Chapter 2 Installation Guide ............................................................................ 8
2.1 Unboxing...................................................................................................... 8
2.2 Hard Disk Installation ................................................................................. 8
Chapter 3 Local Operation Guide ................................................................. 10
3.1 Hard disk installation steps: .................................................................... 10
1. 3.1 Start Up and Shutdown .............................................................. 10
3.1.1 Start Up .......................................................................................... 10
3.1.2 Shutdown ....................................................................................... 10
3.1.3 Power Off Recovery ..................................................................... 10
3.2 Login System ............................................................................................ 10
3.3 Menu Operation ........................................................................................ 10
3.3.1 Sign out .......................................................................................... 10
3.3.2 Camera Adding ............................................................................. 11
3.3.3 Real-time Preview ........................................................................ 13
3.3.3.1 Overview of Related Functions ....................................... 13
3.3.3.2 PTZ control ........................................................................ 15
3.3.5 Backup ........................................................................................... 20
3.3.6 Video Configuration ...................................................................... 22
3.3.6.1 Video Program................................................................... 23
3.3.6.2 Extended Function Application ....................................... 23
3.3.6.3 Output Configuration ........................................................ 25
3.3.7 Hard Disk Management ............................................................... 26
3.3.8 System Configure ......................................................................... 27
3.3.8.1 Time Setting ....................................................................... 28
3.3.8.2 Network Parameters ......................................................... 29
3.3.8.3 Alarm Management .......................................................... 31
3.3.8.4 User Management ............................................................ 31
3.3.9 System Maintenance.................................................................... 32
3.3.9.1 System Info-Stream Statistics ......................................... 33
 3.3.9.2 System Info-Log Info ........................................................ 33
3.3.9.3 System Info-Export Configuration................................... 33
3.3.9.4 System Info-Import Configuration ................................... 33
3.3.9.5 System Update .................................................................. 34
Chapter 4 Network Operation Guide............................................................ 35
4.1 WEB browser operation guide................................................................ 35
4.1.1 Internet connection ....................................................................... 35
4.1.2 Control installation and user logout............................................ 35
Chapter 5 Mobile Operator Guide ................................................................ 36
Chapter 6 FAQ ................................................................................................ 38

-4-
 Hybrid Network Digital Video Recorder (HVR) User Manual
PARAMETERS

HVR5004HF_5008HF_5016 HVR6004H_HVR008 HVR8004

Model
HF H U

Operating system Embedded Linux Operating System

Analog input 4CH/8CH/16CH 4CH/8CH 4CH

Support 60Mbps access bandwidth ONVIF protocol, H.264 coding

Analog input
type

Video CVBS output 1CH HMDI, 1CH VGA, 1CH CVBS

Output
1024×768/1280×1024/1440×900/1920×1080
resolution

Input resolution 960H/720P/1080P/3MP/4MP

Analog input 4CH/8CH/16CH 4CH/8CH 4CH

Audio 4CH_8CH_16CH G.711 network digital audio input (ONVIF), RJ45

Digital input
interface

H.264, Support VBR and variable frame rate, support set video
Compression
quality and compressed stream

960H 25FPS

960H 25FPS 960H 25FPS 720P 25FPS

Video coding 720P 25FPS 720P 25FPS 1080P 25FPS

Coding
H1080P 25FPS 1080P 25FPS 3MP 25FPS

4MP 25FPS

Video bitrate 128Kbps-5Mbps, can be customized (Max 5Mbps)

AAC ADPCM

Stream type Video stream and composite stream(video and audio stream)

Video loss detect Linkage mode, email, PTZ, alarm output

Image dynamic detection each channel supports 192 areas setting, can set level 3 sensitivity

the analog channel is related with code rate, the network channel is
Image playback quality
synchronized with the previewed main stream

Area occlusion setting each channel supports 4 area occlusion setting

record mode support manual, auto, motion detection, alarm

-5-
 Hybrid Network Digital Video Recorder (HVR) User Manual
backup mode Support hard disk, USB, network storage and backup

operation mode Mouse, remoter, front panel keypad

local login user name and password, user name: admin password: 123456

video save local hard drive, network

4CH Analog input

2CH Analog + 2CH IP

4CH IP

8CH Analog

video input 4CH Analog + 4CH IP

8CH IP

16CH Analog

8CH Analog + 8CH IP

16CH IP

4CH/8CH/16CH analogue input / audio input， RJ45 port

External Audio input
4CH/8CH/16CH Analog/ network audio, RJ45 interface
interface
Video output 1CH HDMI,1CH VGA, 1CH CVBS

Audio output HDMI audio output，RCA audio output HDMI, RCA

network
10/100M adaptive
interface

RS485 1 RS485

USB 2USB ports for mouse and USB drive

alarm input no

alarm output no

WLAN Via USB mount 7601 NIC chip support

SATA 1/2SATA
Hard disk
Max capacity each supports up to 8TB

mobile monitor Support iPhone, Android smart phone, APP: XVR PRO

Power DC12V

Consumption 3W

-6-
 Hybrid Network Digital Video Recorder (HVR) User Manual
temperature -10℃～＋55℃

humidity 10％-90％

HVR:
size
packing:

weight(without hard disk) net weight: gross weight:

Container

Installation mode On desk

hardware configure

CPU：HI3520DV2_HI3520DV3_HI3521AV1

Board Models：HVR5004HF_5008HF_5016HF_6004H_6008H_8004U

PCB board model:NVP6134C

Coding chip: HI3520DV2_HI3520DV3_HI3521AV1

Encoding chip:

Power: DC12V

Hard disk: WD/ST_SV35 the best

Dongle: support

Chapter 1 Product Introduction

1.1 Product Overview

This product is only designed for video surveillance, which is used for encoding and recording.

It’s combined with H.264 video compression, max capacity hard disk, TCP/IP, embedded Linux

operating system and other advanced electronic information technology. This achieves high

quality image, low bitrate recording and good system stability.

This product has a variety of functions: record, playback and monitor simultaneously. Also, it

can achieve the synchronization of video and audio. It has advanced control technology and

powerful network data transmission capability.

1.2 Main Functions

The following functions are different because of the different products and hardware versions.

 real time monitor

 compression function

-7-
 Hybrid Network Digital Video Recorder (HVR) User Manual
 record

 video playback and backup

 PTZ control

 alarm management and control

 communication interface

 network

Chapter 2 Installation Guide

2.1 Unboxing

When you receive this product, please check according to the "Network Digital Video Recorder

List" in the box.

2.2 Hard Disk Installation

Installation preparation:

Please prepare a cross screwdriver. 1 to 9 hard disks can be installed in this series of network

digital video recorders, hard disk capacity unlimited.

Hard disk installation steps:

3.1 Hard disk installation steps:

1.Unscrew screws at the side of the housing, open the upper shell.

2.onnect the hard disk data cable and wire.

3.Fix the hard disk to the lower shell of the housing with screws.

-8-
 Hybrid Network Digital Video Recorder (HVR) User Manual

4.Cover up and upper shell with screws.

-9-
 Hybrid Network Digital Video Recorder (HVR) User Manual
Chapter 3 Local Operation Guide

1. 3.1 Start Up and Shutdown

3.1.1 Start Up

Plug in the power cable, press the start up button, power indicator light on, video recorder

powering up. After starting up, default video outputting mode as multi-screen output, if powering

time is in the preset video recording time, the system will automatically start the timing recording

function.

Notice: Please use the power/adapter supplied with the network digital video recorder. Do not

use other types or brands of power supply instead of the original power adapter.

3.1.2 Shutdown

*To shutdown the device, long press the start up button at the front panel

*Go to 【Right-click menu】 → 【Shut down system】, select 【shutdown】. (Hint: It is

recommended to use this method when shutting down to avoid damage to equipment and hard

disk when accidental power off).

Note: Before replacing the hard disk, make sure the device has been shut done.

3.1.3 Power Off Recovery

When the video recorder is recording, if the system power is cut off or forced to shut down,

you can turn on the DVR, then it will automatically save the video before powering off, and

automatically resume to the status before the powering off.

3.2 Login System

After normal start up, click the right mouse button to select the main menu will pop up the user

login interface, please enter the correct user name and password to log into the system (default

user name: admin password: 123456).

3.3 Menu Operation

After the user successfully login, follow the menu bar on the interface for the relevant settings:

3.3.1 Sign out

Click on the [Close System] icon on the menu, the interface will be shown on the right:

Logout: Click the "Cancellation" button to log out of the current user;

- 10 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
Restart: Click "Reboot" button to restart the device automatically;

Shutdown: Click the "Close" button to shutdown the device.

3.3.2 Camera Adding

Analogue camera:

Connect the analog camera / coaxial camera directly to the VIDEO IN port of the DVR.

Support inputting devices are AHD (720P 1080P 3MP 4MP)

TVI (720P 1080P)

CVI (720P 1080P)

Analogue (960H)

IP Camera:

Please switch to the mixed mode or IPC mode by this order: 【Right-click Menu】 → 【Main

Menu】 → 【System Setting】 → 【Mode Switch】

This product supports multi-version of ONVIF protocol, compatible with most popular brand

IPC on the market.

Before connecting to HVR, please ensure that the IPC’s IP address and HVR are in the same

network segment, and the main stream and sub-stream need to be adjusted to the recommended

value, otherwise it may have the following issues: unable to search IPC, no image showing, image

hanging,low picture quality, black image, beyond the decoding capacity and so on.

Connect the HVR with Internet and connect to LAN switch. After powering on, click the icon

on the main menu and set the NVR IP address, subnet mask and gateway on the basic
configuration page. You can use the ping command on the PC host in the LAN to ping the HVR to

detect whether the NVR is connected to the LAN.

Automatically adding IPC:

In the [right-click menu] → [Add auto] icon, click OK, the device will automatically search and

add the IPC.

- 11 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
To add a IPC manually:

In the [right-click menu] → [network channel] icon, enter the IP channel management

interface, as shown below:

Click on the channel "+" button, HVR will automatically search all IPC in the LAN , search

completed, double-click the IP address which is needed to add to the HVR. You can also click on

the manual adding, manually enter the IP address and port to add the IP camera.

- 12 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

3.3.3 Real-time Preview

After powering on the device starts normally, it will enter the real-time monitoring screen, as

shown in the following picture:

3.3.3.1 Overview of Related Functions

* Image color modification

- 13 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
In the [right-click menu] → [image color] icon, as shown below:

Video mode settings

In the [right-click menu] → [video mode settings] icon, as shown below: switchable to AHD /

TVI / CVI

Electronic zoom function

In the [right-click menu] → [electronic zoom] icon, as shown below: the lower right corner of the

small map to draw the area that you want to enlarge the area of the image, double-click to restore

to the preview page.

- 14 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
*Channel Switching

Select a channel, drag to another channel, you can switch the window position.

Remark: The preview position is switched but the device information won’t changed

3.3.3.2 PTZ control

485 Mode Control:

Before making PTZ control, please make sure that the relevant parameters of PTZ are set

correctly. Need to match the high-speed ball-related settings to set the corresponding channel

value, as shown below

After setting the parameters, select the channel that need to be controlled, in the preview

interface, and then in the [right-click menu] → [PTZ control] icon to control the direction of the lens;

focal length, focus, aperture zoom in and zoom out; PTZ speed settings. Advanced functions can

be set in the lower right drop-down menu. As shown below

- 15 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

*Preset point of the settings and calls, (camera need to have this function)

First, through the PTZ control direction button to turn the camera to the desired position,

and then in the "preset" list, select a preset number, and finally click "Settings" button.

Select a preset number to be called in the Presets drop-down list and click the Callback

button.

*Cruise settings, call (camera need to have this function)

In the "Cruise" list, select a cruise number, click the "Settings" button to enter the "cruise

settings" page, as shown below:

And then select the preset point, cruise speed, retention time, click the "join" button, set the

cruise path preset point(you can add multiple preset points).

In the "cruise" drop-down list, select a cruise number, click the "call" button.

- 16 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

*Set and call tracks

In the "track" drop-down list, select a track number, click the "Settings" button to start recording,

and then a series of directional operations, click the "set" button again to stop the record track, the

track memory is successful. In the "track" drop-down list, select a track number, click the "call"

button, then you can call.

Coaxial mode control (The device must have UTC function)

Before making coaxial control, make sure that the PTZ related parameters are set correctly.

You need to set HVR to coaxial control mode. As shown below

Set the parameters, in the preview interface to select the channel needed to be controlled, and

then in the [right-click menu] → [PTZ control] icon to control the camera's menu function

application. As shown below.

- 17 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

3.3.4 Video playback

Click 【right-click menu】 → [video check], enter the video playback interface, playback page

includes playback video, playback capture, the default is the local video interface (see below) The

following detailed description:

3.3.4.1 Playback

*Channel Select(right area)

- 18 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
By default, ch1-ch4 is selected by "channel" and is automatically selected from channel 1.

*Time search (right area + lower area)

The default time is the date of the device’s date, according to your needs to select the year /

month / day, the video will be in the bar on the bottom of the interface area display (Note:

different types of video has different color bar)

*video playback

To retrieve the video bar, the mouse can drag the video bar left and right, you can also use

the mouse roller slowly zoom to adjust the 24-hour time axis unit scale, time unit scale: 1h,

0.5h, 15min, 5min, 2min, 1min; When the center point moves to the color column timeline,

the exact time prompt is automatically displayed, accurate to seconds. Double-click the

color column timeline to quickly playback the video, according to the accuracy of playback

needs to adjust the scale, so that playback time more accurate positioning.

*Quick Function

Name Icon Function description

Pause / Pause / play current video

Play

Stop Stop the video, all screen closed

Fast Video Fast Forward / Rewind

Forward /

Rewind

Slow / Fast Play the video at the speed of 1X/2X/4X/8X/16X

Screen Switch to playback screen splitting mode

splitting

mode

Backup to enter the backup page

Capture Capture picture at the selected channel

Full Screen Single-click to enter full screen

Electronic Use the mouse to draw at the the lower right corner

zoom area to zoom in

Exit Exit the playback page, return to preview page

Playback

- 19 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

3.3.4.2 Local Snapshot

In the upper right corner of the video playback page select the playback picture, switch to the

playback page, see below

Playback mode will automatically switch to "File Management", after the interface is refreshed,

click the button in the lower right corner to retrieve the same day the channel 1 all the
capture file, the default channel number sort, followed by the file style.

* Channel Selection (right area)

By default, select channel 1 and use the left and right buttons to select other channels

*Time Search (right area)

The default time is the date of the device, select the year / month / day as needed.

*Click the right button , you can start the specified time, specify the channel capture
file.

*Click the button below to back up the marked image.

3.3.5 Backup

In the [right-click menu] → [main menu] → [video backup], enter the file backup interface, the

default backup settings main interface as shown below:

- 20 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

This product supports video backup download, the following description is about the backup

conditions:

Data Type: Default AVI Format: it is universal for All Players,

MP4 format: private format, need to use MP4 player (proprietary)

RAW format: common format, professional application.

disk group selection: the defaulted as the general disk group, when the category disk group

show ,it can be selected.

Start time: Set the time at which the backup file starts. Defaulted

as the current day

End time: The time at which the device backup file was completed. Defaulted as the current day

backup capacity: after set the start time and the end time ,then update the capacity to confirm

the time period file size.

channel selection: the default is empty, need to select the backup

channel, the maximum choice of 2 channels.

HVR Insert USB external storage device, click the button of to detect whether the

USB device is properly recognized, such as normal identification, "backup device", "device

partition" and "device partition space" will automatically brush out the corresponding information.

After the above conditions are met, select the channel, set the start time and end time, update

the backup capacity. Click the button below the main interface, you can view from the "progress"

changes in the backup situation, the progress of 100% when the backup is complete.

- 21 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
After the above conditions are met, select the channel, set the start time and end time, update

the backup capacity. Click the button of below the main interface, you can view from

the changes of "progress" to check the backup situation, when the progress up to 100% ,the

backup is complete.

3.3.6 Video Configuration

In the 【 right-click menu 】 → [main menu] → [video configuration], enter the basic

configuration interface, as shown below

 channel: defaulted as channel 1, please select the corresponding channel to set.

 stream type: video stream represents a separate video, composite stream

represents video and audio

 video quality: according to your need to choose a different image quality.

 Resolution: automatically according to the signal provided by the camera to

identify the corresponding resolution.

 bit rate limit: in the left and right options can choose different values, but also can

be set by yourself;

 frame rate: in the left and right can choose a different value, the default is "full

frame rate";

- 22 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
 manual recording and event recording is equivalent to the basic configuration, do

not do a detailed description here.

3.3.6.1 Video Program

The page use to configure scheduled route , you can schedule scheduled video recording or

motion detection video, shown as the following figure:

 channel: defaulted as channel 1, please select the corresponding channel to set

 The default use is 7 * 24 hours timer recording. System according to 7 * 24 hours to

develop a video program, blue color represents regular video, green color represents

motion detection video. It is Valid when the recording mode is set as automatic

3.3.6.2 Extended Function Application

Click-menu】→ 【Main menu】 → 【System setting】 → 【Output mode】 As shown below:

- 23 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

 channel name: the name of the corresponding image on the upper left corner of the channel

display.

 Video cover: After starting this function, you can set up four cover areas

 Video detection: start the function, when detect that video is loss, or video abnormalities,

according to set the corresponding linkage or alarm, Note: products need support alarm

function

- 24 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
 Motion detection: When this function is enabled, there are 3 kinds of sensitivity options.

When dynamic picture is detected, it will be linked or alarmed according to the settings.

Shown as below

 Image parameters: can set the brightness, contrast, saturation, and other information

3.3.6.3 Output Configuration

In the 【right-click menu】 → 【main menu】 → 【system settings】 → 【output mode】 output

configuration shown as below:

- 25 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

 menu background contrast: you can set the transparency of menu item background, divided

into opaque / three to one / four to one;

 screen protection time: set the automatically turn off screen time

 Main display resolution: set the current VGA, HDMI output resolution

3.3.7 Hard Disk Management

In the [right-click menu] → [main menu] → [hard disk management], as shown below

- 26 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

 disk type: as the code of the product model.

 disk capacity: as the total capacity available for the disk.

 free space: the remaining capacity after the disk has been recorded or used capture

 Status: Current working status of the disk:

 Initialize the hard disk: the disk format operation.

 Note: The hard disk used for the first time must be formatted. And often check the log

situation.

3.3.8 System Configure

Right-click menu--main menu--system setting-system configure, as shown in the picture

- 27 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

3.3.8.1 Time Setting

 system time: click the the set button after the system time ,then you can set the HVR time

manually . After the modification time of the device is valid, the time of the channel is

automatically updated;

time zone: switch time zone, the system time will automatically update the date and

time, some time zone exist daylight saving time;

- 28 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

3.3.8.2 Network Parameters

Right-click menu--main menu--network configure, as shown in the picture

 Basic Setting

 Network card type: you can choose different network card based on your needs

 MAC address: display physical address of the current network interface, can not

modify

 Obtain an IP address automatically: IP/mask/gateway can’t be modified when select

DHCP. If DHCP works, it will get new IP/mask/gateway assigned by the router

(remote login requires a new IP address). If not, it’s still the old IP/mask/gateway (can

use the old one to remote log in).

 Update: can re-obtain a DHCP lease

 IP address: enter the corresponding number to modify the default IP address

 Subnet mask: enter the corresponding subnet mask

 Gateway: enter the corresponding gateway

- 29 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
 WALN mode: multiple network card need to set the default router, can visit the

external network through this channel.

 DDNS setting (advanced setting)

Please select DDNS and set in advanced setting.

Notice: please make sure the device can visit external network when use this function.

 Server type: there are 3 types corresponded to 3 servers in the default list.

 User domain name: every type of server is correspond to the applied user domain

name.

 User name & password: enter the right user name and password

 E-mail setting(advanced setting)

This function is used in conjunction with “email” of Linkage configure. Please enter the right

email address and password of sender and receiver, DNS and port of Email at the right column.

There are other additional functions.

Click “test” icon, to send an email to the recipient's email, it will be prompted if success or

not.

Notice: please make sure the network environment is good, HVR can access external

network smoothly when using Email Linkage configure.

Notice: It is recommended to use a self-built mailbox server, the mailbox server on the

market with a firewall, sending multiple messages by the same account may be blocked by

the firewall or blocked link mail server.

 PPPOE (advanced setting)

- 30 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
 Enable PPPoE: need to fill in the correct PPPoE user name and password, if the

network is connected, it can get the dynamic address of the device.

 port setting:

The port numbers are 80, 5050, 6050 and 8050 respectively, and the port number can be

modified.

3.3.8.3 Alarm Management

Right-click menu--main menu-system setting-alarm setting:

 alarm input

 Select the channel and alarm status

 Start “alarm” function

 Alarm time& Linkage mode: select the alarm time zone and linkage mode

 Copy: copy the above configuration to other channels

 alarm output

 Alarm output: select the channel

 Output alarm delay: select the alarm output time or custom setting

 Alarm time: select the alarm time zone

 Copy: copy the above configuration to other channels

 Exception configuration

 Exception type: 6 types

 Trigger mode: all

Linkage setting

You can query, add, modify, delete all alarm type and all channel’s linkage information on

this interface.

3.3.8.4 User Management

Right-click menu--main menu--system setting--user management, as shown in the picture

- 31 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

 Add user: add a new user

 Delete user: delete the selected user (except the admin and default user)

 Edit user: edit an exiting user

 User authorization: set the selected user’s permission

3.3.9 System Maintenance

Right-click menu--system setting--HVR version: as shown in the picture

- 32 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

 System version: the current version of HVR

 Model: the current model of PCB board software

 UID: needed for P2P cloud service

 Cloud server: the cloud server for HVR

3.3.9.1 System Info-Stream Statistics

 Right-click menu--system info--stream statistics

 Stream info: All channels’ real time main stream info are calculated by per second and per

hour.

3.3.9.2 System Info-Log Info

Right-click menu--system info--log info

You can check the different type and time log info on this interface. There are 3 main type:

management, exception, alarm. Each main type has multiple subtypes. (The system default is to

search all type logs.) It can check the log time across a day, a week or month.

3.3.9.3 System Info-Export Configuration

 Right-click menu--system info--export configuration

 Please export the system configuration to USB.

3.3.9.4 System Info-Import Configuration

Right-click menu--system info--import configuration

 Please import the system configuration saved in the USB. It works after reboot.

- 33 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
3.3.9.5 System Update

Right-click menu--main menu--system setting--system update, as shown in the picture

Please update the version on this interface. Please insert the USB with newest system file,

after choose it, then click and start update. Please reboot after finish update.

Also, it can use network or WEB to update.

Notice: Do not manage the HVR or remote control while updating. Or it causes unrepairable

arror!

Notice: It taked 3-5 minutes for update, do not power off.

- 34 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

Chapter 4 Network Operation Guide

4.1 WEB browser operation guide

4.1.1 Internet connection

Verify that the network digital video recorder is properly connected to the network;

Set the IP address, subnet mask and gateway to the host computer and HVR respectively. If

there is no rout in the network, please assign the IP address of the same network segment. If

there is a rout in the network, you need to set the corresponding gateway and subnet mask. About

the network setting of digital video recorder, please consult “network setting”

Make sure the IP address is set correctly. After the IP address is set, you can use the

system's own ping tool to check whether the network digital video recorder is properly connected

to the network.

4.1.2 Control installation and user logout

 After the network digital video recorders connected to the network, you can log on through

the IE browser to access network digital video recorders;

 You can download and install IE plug-in from the network and NVR, after installation , run

the plug-in, and then in the IE browser, entering the network digital video recorder IP

address, user name, password, the connection successfully and then will pop up the

following interface:

- 35 -
 Hybrid Network Digital Video Recorder (HVR) User Manual

After Landing correctly, then you can enter the network preview interface,

the operation method of the network side is similar to the host side.

Chapter 5 Mobile Operator Guide

This operating guide is for how to install and use mobile phone client in Android, iOS phone. As

to our company's products, we commonly used mobile client app is XVR PRO., customers can

customize the APP according to their needs, About how to use these APP the methods are similar,

following, we will explain how to use with the APP XVR PRO as an

example.

Mobile phone client software supports Android 4.0 and above

system version (mobile phones include the current market

commonly used brands such as Huawei, millet, HTC, etc.), and iOS

6.0 and above system version (mobile phones including iPhone,

iPad, etc.).

- 36 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
☆ Installation and operating instructions

1. Download the current latest version of the XVR PRO installation file from the application

treasure;

2. Online installation;

3. After installation , click the appropriate program icon, open the app, please see the right figure.

Note: In actual use, the phone performance and network status will affect the preview effect. If the

network conditions are poor, you can appropriately reduce the bit rate / frame rate, to ensure

preview image smoothly.

The functions of common buttons as follow:

Function Keys Names Descriptions

Device Adding Select adding method then add the device

Capture Capture the current channel image (the capture file is

saved to mobile phone's default album)

Manual Manually record the video of the current channel

Recording (videos will be saved to the default mobile phone
video directory)
Audio Switch Open the audio of that channel

Intercom switch After switching on you can send voice to the camera
end
File Management View all captured pictures and videos

Video Playback Enter video playback interface to view the video

Settings Enter the setup interface

PTZ control + To achieve PTZ control up, under, left and right and
zoom lens zoom in and out

Focal Length Focus length adding or reducing

Aperture Aperture adding or reducing

- 37 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
Chapter 6 FAQ

The device can not be started or restarted

 possible reason:

 network digital video recorders use the wrong procedures to update cause the system

software is be damaged;

 network digital video recorder boards failure, please contact the supplier to repair;

 hard disk failure, please replace the hard disk;

 There is a problem with the power supply. Please try to replace the power supply.

 Can not use remote controller

 possible reason:

 Please check whether the battery in the remote control is properly installed, especially the

positive and negative polarity;

 Please Check whether there is enough battery power in the remote control battery;

 Please Check whether the remote control window is obscured

 Please Check whether the remote address of the network digital video recorder matches

the remote control address

 PTZ can not be controlled

possible reasons:

 The connection of RS-485 interface cable is not correct, A, B port connected reversely;

 The setting of PTZ decoder type, protocol, baud rate, address bit is not correct;

 RS-485 bus connect number of PTZ canse several signal reflection, need to

parallelly connect a 120Ω resistor in distal;

 RS-485 interface of the DVR board failure.

 DVR preview without picture, black and white image,or blurred screen

- 38 -
 Hybrid Network Digital Video Recorder (HVR) User Manual
possible reasons:

Video input system does not match, if the camera is NTSC standard, network digital video

recorder use the PAL system, there will be a preview image .

The video input mode does not match. AHD, TVI, CVI signal need to be corresponding among

the camera and the video recorder.

 Network digital video recorder playback show blurred screen or can not query the video

possible reasons:

 program read error, please try to restart the network digital video recorder;

 There is an error of the hard disk data because of bad sectors, bad cluster,please check

the hard disk, if hard disk damaged, please replace the hard disk;

 Network digital video recorder hardware failure, please contact the supplier.

Can not connect to network digital video recorder through network

possible reasons:

 Please check whether the network physical connection is normal

 Please check the network parameter configuration of the network digital video recorder

 Please check whether there is an IP conflict in the network

 The downloaded or backed up video can not be played normally

possible reasons:

 does not install the player correctly

 backup with U disk or mobile hard disk file system error

 You do not install graphics driver or install above DX9.0 graphics acceleration software.

- 39 -