Scribd
Upload
2 views

Application Data Sheet - PD - 2

Hoja de datos para selección de aplicaciones

Uploaded by

agrosagitario77
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2 views

Application Data Sheet - PD - 2

Hoja de datos para selección de aplicaciones

Uploaded by

agrosagitario77
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PUMP SELECTION FORM

Fluid properties
Fluid to be pumped: Marinade
Viscosity: 7,000 Units: cP cSt SSU
Density (Gravity): 1.26
Does it contain soft solid particles? Yes No
Is particle integrity important? Yes No
State maximum diameter to keep integrity: 0.04 in mm
Is: abrasive sticky ✔ corrosive

Process conditions
Flow: 40-80 Units: gpm L/min m3/h
lb/min kg/min
Temperature: 50 °C °F
Is there any chance to run the pump without product (dry)? Yes No

Suction Pressure (NPSHa): psi bar


or
Minimum fluid level to the pump (h s ): 3 ft m
Suction pipe diameter: 2 in mm
Suction pipe lenght (L s ): 4 ft m
Elbow quantity: 2

Discharge Pressure: psi bar


or
Height to discharge (h d ): 7 ft m
Discharge pipe diameter: 2 in mm
Discharge pipe lenght (L d ): 15 ft m
Elbow quantity: 2

For QTS only:


Does the pump perform CIP conditions? Yes No
3
Flow: Units: gpm L/min m /h

Other important information:


New application. Currently using a centrifugal pump - not going well (too thick). Batch operation - 160 lbs/batch.
Can live with 3-5 minutes/batch (42 gpm), but would prefer 1.5-3 minutes/batch.
Option for cart (wheels). Option for VFD.

Rev. C 2021

You might also like