2012 Compass

2012
OWNER’S MANUAL
Compass
Chrysler Group LLC
12MK49-126-AA First Edition Printed in U.S.A.

907715 Compass OM cover.indd 1 3/28/11 7:32 AM

VEHICLES SOLD IN CANADA
With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of fea-
Chrysler Group LLC shall be deemed to be deleted and the tures and equipment that are either standard or optional on
name Chrysler Canada Inc. used in substitution therefore. this vehicle. This manual may also include a description of
features and equipment that are no longer available or were
DRIVING AND ALCOHOL not ordered on this vehicle. Please disregard any features
Drunken driving is one of the most frequent causes of and equipment described in this manual that are not on this
accidents. vehicle.
Your driving ability can be seriously impaired with blood Chrysler Group LLC reserves the right to make changes in
alcohol levels far below the legal minimum. If you are drink- design and specifications, and/or make additions to or
ing, don’t drive. Ride with a designated non-drinking driver, improvements to its products without imposing any obliga-
call a cab, a friend, or use public transportation. tion upon itself to install them on products previously manu-
factured.
WARNING!
Driving after drinking can lead to an accident. Your
perceptions are less sharp, your reflexes are slower,
and your judgment is impaired when you have been
drinking. Never drink and then drive. Copyright © 2011 Chrysler Group LLC
SECTION TABLE OF CONTENTS PAGE
1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1
2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2
3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 3
4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 4
5 STARTING AND OPERATING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289 5
6 WHAT TO DO IN EMERGENCIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379 6
7 MAINTAINING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401 7
8 MAINTENANCE SCHEDULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449 8
9 IF YOU NEED CONSUMER ASSISTANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 9
10 INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475 10
 INTRODUCTION
1

CONTENTS
䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . . 7
䡵 Rollover Warning . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 7
䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 5 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . . 8
4 INTRODUCTION
INTRODUCTION When it comes to service, remember that your authorized
Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech-
LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR威 parts, and cares about
workmanship, distinctive styling, and high quality - all your satisfaction.
essentials that are traditional to our vehicles.
ROLLOVER WARNING
This Owner’s Manual has been prepared with the assis- Utility vehicles have a significantly higher rollover rate
tance of service and engineering specialists to acquaint than other types of vehicles. This vehicle has a higher
you with the operation and maintenance of your vehicle. ground clearance and a higher center of gravity than
It is supplemented by Warranty Information, and various many passenger cars. It is capable of performing better in
customer-oriented documents. Please take the time to a wide variety of off-road applications. Driven in an
read these publications carefully. Following the instruc-unsafe manner, all vehicles can go out of control. Because
tions and recommendations in this manual will help of the higher center of gravity, if this vehicle is out of
assure safe and enjoyable operation of your vehicle. control it may roll over when some other vehicles may
NOTE: After reviewing the owner information, it not.
should be stored in the vehicle for convenient referenc- Do not attempt sharp turns, abrupt maneuvers, or other
ing and remain with the vehicle when sold. unsafe driving actions that can cause loss of vehicle
 INTRODUCTION 5
control. Failure to operate this vehicle safely may result seat belts could cut the highway death toll by 10,000 or
in a collision, rollover of the vehicle, and severe or fatal more each year and could reduce disabling injuries by
injury. Drive carefully. two million annually. In a rollover crash, an unbelted
1
person is significantly more likely to die than a person
wearing a seat belt. Always buckle up.

HOW TO USE THIS MANUAL

Consult the Table of Contents to determine which section
contains the information you desire.
Since the specification of your vehicle depends on the
items of equipment ordered, certain descriptions and
illustrations may differ from your vehicle’s equipment.
The detailed index at the back of this Owner’s Manual
contains a complete listing of all subjects.
Rollover Warning Label Consult the following table for a description of the
Failure to use the driver and passenger seat belts pro- symbols that may be used on your vehicle or throughout
vided is a major cause of severe or fatal injury. In fact, the this Owner’s Manual:
U.S. government notes that the universal use of existing
6 INTRODUCTION
 INTRODUCTION 7
WARNINGS AND CAUTIONS
This Owner’s Manual contains WARNINGS against op-
erating procedures that could result in a collision or
1
bodily injury. It also contains CAUTIONS against proce-
dures that could result in damage to your vehicle. If you
do not read this entire manual, you may miss important
information. Observe all Warnings and Cautions.

VEHICLE IDENTIFICATION NUMBER

The Vehicle Identification Number (VIN) is found on the
left front corner of the instrument panel, visible through
the windshield. This number also is stamped into the
right front body, on the right front seat crossmember Vehicle Identification Number
under the carpet and the vehicle registration and title.
8 INTRODUCTION
VEHICLE MODIFICATIONS/ALTERATIONS

WARNING!
Any modifications or alterations to this vehicle could
seriously affect its roadworthiness and safety and
may lead to a collision resulting in serious injury or
death.

Right Front Body VIN Location

NOTE: It is illegal to remove or alter the VIN.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

CONTENTS 2

䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 䡵 Vehicle Security Alarm — If Equipped . . . . . . . . 18

▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . 18
▫ Locking Doors With A Key . . . . . . . . . . . . . . 14 ▫ Rearming The System . . . . . . . . . . . . . . . . . . 18
▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . 14 ▫ To Disarm The System . . . . . . . . . . . . . . . . . 19
䡵 Sentry Key威 . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ▫ Vehicle Security Alarm Manual Override . . . . . 19
▫ Replacement Keys . . . . . . . . . . . . . . . . . . . . . 16 䡵 Remote Keyless Entry (RKE) — If Equipped . . . 20
▫ Customer Key Programming . . . . . . . . . . . . . 16 ▫ To Unlock The Doors And Liftgate . . . . . . . . . 21
▫ General Information . . . . . . . . . . . . . . . . . . . 17 ▫ Remote Key Unlock, Driver Door/All First
Press . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
▫ Illuminated Approach — If Equipped . . . . . . . 22 ▫ Child-Protection Door Lock System — Rear
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
▫ To Lock The Doors And Liftgate . . . . . . . . . . 22
䡵 Power Windows — If Equipped . . . . . . . . . . . . 36
▫ Sound Horn With Remote Key Lock . . . . . . . . 22
▫ Power Window Switches . . . . . . . . . . . . . . . . 36
▫ Flash Lights With Remote Key Lock/Unlock . . 23
▫ Auto-Down . . . . . . . . . . . . . . . . . . . . . . . . . 37
▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 24
▫ Window Lockout Switch . . . . . . . . . . . . . . . . 37
▫ Programming Additional Transmitters . . . . . . 25
䡵 Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
▫ General Information . . . . . . . . . . . . . . . . . . . 25
䡵 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . 39
▫ Transmitter Battery Replacement . . . . . . . . . . 25
▫ Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . 43
䡵 Remote Starting System — If Equipped . . . . . . . 26
▫ Adjustable Upper Shoulder Belt Anchorage . . . 48
▫ How To Use Remote Start . . . . . . . . . . . . . . . 27
▫ Second Row Center Lap/Shoulder Belt
䡵 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Operating Instructions . . . . . . . . . . . . . . . . . . 49
▫ Manual Door Locks . . . . . . . . . . . . . . . . . . . 30
▫ Lap/Shoulder Belt Untwisting Procedure . . . . 52
▫ Power Door Locks . . . . . . . . . . . . . . . . . . . . 31
▫ Seat Belts In Passenger Seating Positions . . . . . 52
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11
▫ Automatic Locking Retractor Mode (ALR) — ▫ Air Bag Deployment Sensors And Controls . . . 67
If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 53
▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . 74
▫ Energy Management Feature . . . . . . . . . . . . . 54
▫ Child Restraints . . . . . . . . . . . . . . . . . . . . . . 75 2
▫ Seat Belt Pretensioners . . . . . . . . . . . . . . . . . 54
䡵 Engine Break-In Recommendations . . . . . . . . . . 84
▫ Supplemental Active Head Restraints (AHR)
䡵 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
— If Equipped . . . . . . . . . . . . . . . . . . . . . . . 55
▫ Transporting Passengers . . . . . . . . . . . . . . . . 85
▫ Enhanced Seat Belt Use Reminder System
(BeltAlert威) . . . . . . . . . . . . . . . . . . . . . . . . . 59 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . . 85
▫ Seat Belt Extender . . . . . . . . . . . . . . . . . . . . . 60 ▫ Safety Checks You Should Make Inside The
Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
▫ Seat Belts And Pregnant Women . . . . . . . . . . 61
▫ Periodic Safety Checks You Should Make
▫ Supplemental Restraint System (SRS) —
Outside The Vehicle . . . . . . . . . . . . . . . . . . . 88
Air Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
▫ Advanced Front Air Bag Features . . . . . . . . . . 63
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
A WORD ABOUT YOUR KEYS Ignition Key Removal
The authorized dealer that sold you your new vehicle has
1. Place the shift lever in PARK (if equipped with an
the key code numbers for your vehicle locks. These
automatic transmission).
numbers can be used to order duplicate keys. Ask your
authorized dealer for these numbers and keep them in a 2. Turn the ignition switch to the ACC (Accessory)
safe place. position.
3. Push the key and cylinder inward and rotate the key to
the LOCK position.
4. Remove the key from the ignition switch lock cylinder.

Vehicle Key
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13
NOTE: If you try to remove the key before you place the
shift lever in PARK, the key may become trapped tem-
porarily in the ignition switch cylinder. If this occurs,
place the shift lever in PARK, rotate the key to the right 2
slightly, then remove the key as described. If a malfunc-
tion occurs, the system will trap the key in the ignition
cylinder to warn you that this safety feature is inoperable.
The engine can be started and stopped but the key cannot
be removed until you obtain service.

WARNING!

Ignition Switch Positions • Before exiting a vehicle, always apply the parking
brake, shift the transmission into PARK, and re-
1 — LOCK 3 — ON/RUN
2 — ACC (ACCESSORY) 4 — START move the key fob from the ignition. When leaving
the vehicle, always lock your vehicle.
• Never leave children alone in a vehicle, or with
access to an unlocked vehicle.
(Continued)
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

WARNING! (Continued) CAUTION!

• Allowing children to be in a vehicle unattended is An unlocked car is an invitation to thieves. Always
dangerous for a number of reasons. A child or remove the key from the ignition and lock all the
others could be seriously or fatally injured. Chil- doors when leaving the vehicle unattended.
dren should be warned not to touch the parking
brake, brake pedal or the shift lever. Locking Doors With A Key
• Do not leave the key fob in or near the vehicle, and You can insert the key with either side up. To lock the
do not leave the ignition in the ACC or ON/RUN door, turn the key to the right. To unlock the door, turn
position. A child could operate power windows, the key to the left. Refer to “Maintenance Procedures” in
other controls, or move the vehicle. “Maintaining Your Vehicle” for further information.
• Do not leave children or animals inside parked
vehicles in hot weather. Interior heat build-up may Key-In-Ignition Reminder
cause serious injury or death. Opening the driver’s door when the key is in the ignition
and the ignition position is LOCK or ACC, sounds a
signal to remind you to remove the key.
NOTE: With the driver’s door open and the key in the
ignition, the power door locks will not lock and Remote
Keyless Entry (RKE) transmitter will not function.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15
SENTRY KEY姞 seconds for a bulb check. If the light remains on after the
The Sentry Key威 Immobilizer System prevents unauthor- bulb check, it indicates that there is a problem with the
ized vehicle operation by disabling the engine. The electronics. In addition, if the Vehicle Security Light
system does not need to be armed or activated. Operation begins to flash after the bulb check, it indicates that 2
is automatic, regardless of whether the vehicle is locked someone used an invalid key to try to start the engine.
or unlocked. Either of these conditions will result in the engine being
shut off after two seconds.
The system uses ignition keys that have an embedded
electronic chip (transponder) to prevent unauthorized If the Vehicle Security Light turns on during normal
vehicle operation. Therefore, only keys that are pro- vehicle operation (vehicle running for longer than 10 sec-
grammed to the vehicle can be used to start and operate onds), it indicates that there is a fault in the electronics.
the vehicle. The system will shut the engine off in two Should this occur, have the vehicle serviced as soon as
seconds if someone uses an invalid key to try to start the possible by an authorized dealer.
engine.
CAUTION!
NOTE: A key that has not been programmed is also
considered an invalid key, even if it is cut to fit the The Sentry Key威 Immobilizer system is not compat-
ignition switch lock cylinder for that vehicle. ible with some after-market remote starting systems.
Use of these systems may result in vehicle starting
During normal operation, after turning on the ignition
problems and loss of security protection.
switch, the Vehicle Security Light will turn on for three
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
All of the keys provided with your new vehicle have procedure. This procedure consists of programming a
been programmed to the vehicle electronics. blank key to the vehicle electronics. A blank key is one
that has never been programmed.
Replacement Keys
NOTE: When having the Sentry Key威 Immobilizer
NOTE: Only keys that are programmed to the vehicle
System serviced, bring all vehicle keys with you to an
electronics can be used to start and operate the vehicle.
authorized dealer.
Once a Sentry Key威 is programmed to a vehicle, it cannot
be programmed to any other vehicle. Customer Key Programming
If you have two valid Sentry Keys威, you can program
CAUTION! new Sentry Keys威 to the system by performing the
following procedure:
Always remove the Sentry Keys威 from the vehicle and
lock all doors when leaving the vehicle unattended. 1. Cut the additional Sentry Key威 Transponder blank(s)
to match the ignition switch lock cylinder key code.
At the time of purchase, the original owner is provided 2. Insert the first valid key into the ignition switch. Turn
with a four-digit Personal Identification Number (PIN). the ignition switch to the ON/RUN position for at least
Keep the PIN in a secure location. This number is three seconds, but no longer than 15 seconds. Then, turn
required for authorized dealer replacement of keys. Du- the ignition switch to the LOCK position and remove the
plication of keys may be performed at an authorized first key.
dealer or by following the customer key programming
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17
3. Insert the second valid key into the ignition switch. Repeat this procedure to program up to eight keys. If you
Turn the ignition switch to the ON/RUN position within do not have a programmed Sentry Key威, contact your
15 seconds. After 10 seconds, a chime will sound. In authorized dealer for details.
addition, the Vehicle Security Light will begin to flash. 2
NOTE: If a programmed key is lost, see your authorized
Turn the ignition switch to the LOCK position and
dealer to have all remaining keys erased from the sys-
remove the second key.
tem’s memory. This will prevent the lost key from starting
4. Insert a blank Sentry Key威 into the ignition switch. your vehicle. The remaining keys must then be repro-
Turn the ignition switch to the ON/RUN position within grammed. All vehicle keys must be taken to an authorized
60 seconds. After 10 seconds, a single chime will sound. dealer at the time of service to be reprogrammed.
In addition, the Vehicle Security Light will stop flashing.
General Information
To indicate that programming is complete, the Vehicle
The Sentry Key威 system complies with FCC rules Part 15
Security Light will turn on again for three seconds and
and with RSS-210 of Industry Canada. Operation is
then turn off.
subject to the following conditions:
The new Sentry Key威 is programmed. The Remote
• This device may not cause harmful interference.
Keyless Entry (RKE) transmitter will also be pro-
grammed during this procedure. • This device must accept any interference that may be
received, including interference that may cause unde-
sired operation.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
VEHICLE SECURITY ALARM — IF EQUIPPED 3. The Vehicle Security Light in the instrument cluster
This Vehicle Security Alarm monitors the doors, liftgate, will flash rapidly for approximately 16 seconds. This
and ignition switch for unauthorized operation. shows that the Vehicle Security Alarm is arming. During
this period, if a door is opened, the ignition switch is
When the alarm is activated, the interior switches for
turned to ON/RUN, or the power door locks are un-
door locks are disabled. The Vehicle Security Alarm
locked in any manner, the Vehicle Security Alarm will
provides both audio and visual signals, the horn will
automatically disarm. After approximately 16 seconds,
sound, the headlights, park lamps and/or turn signals
the Vehicle Security Light will flash slowly. This shows
will flash repeatedly for three minutes. If the disturbance
that the Vehicle Security Alarm is fully armed.
is still present (driver’s door, passenger door, other doors,
ignition) after three minutes, the parking lights and tail Rearming The System
lights will flash for an additional 15 minutes. If something triggers the alarm, and no action is taken to
disarm it, the Vehicle Security Alarm will turn off the
To Arm The System
horn after three minutes, turn off all of the visual signals
1. Remove the key from the ignition switch and get out after 15 minutes, and then the Vehicle Security Alarm will
of the vehicle. rearm itself.
2. Lock the door using either the power door LOCK
switch or the Remote Keyless Entry (RKE) transmitter
and close all doors.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19
To Disarm The System Security Alarm will arm unexpectedly. If you remain in
Press UNLOCK on the RKE transmitter, or insert the key the vehicle and lock the doors with the RKE transmitter,
into the ignition switch and turn the ignition switch to once the Vehicle Security Alarm is armed (after 16 sec-
the ON/RUN position. onds), when you pull the door handle to exit, the alarm 2
will sound. If this occurs, press the UNLOCK button on
If something has triggered the Vehicle Security Alarm in
the RKE transmitter to disarm the Vehicle Security
your absence, the horn will sound three times and
Alarm.
exterior lights blink three times when you unlock the
doors. Check the vehicle for tampering. The Vehicle Vehicle Security Alarm Manual Override
Security Alarm is designed to protect your vehicle; The Vehicle Security Alarm will not arm if you lock the
however, you can create conditions where the Vehicle doors using the manual door lock plunger.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
REMOTE KEYLESS ENTRY (RKE) — IF
EQUIPPED
This system allows you to lock or unlock the doors and
liftgate or activate the Panic Alarm from distances up to
approximately 66 ft (20 m) using a hand-held Remote
Keyless Entry (RKE) transmitter. The RKE transmitter
does not need to be pointed at the vehicle to activate the
system.

Three Button RKE Transmitter

NOTE: The line of transmission must not be blocked
with metal objects.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21
To Unlock The Doors And Liftgate • For vehicles not equipped with the EVIC, perform the
Press and release the UNLOCK button on the RKE following steps:
transmitter once to unlock the driver’s door, or twice
1. Press and hold the LOCK button on a programmed
within five seconds to unlock all doors and liftgate. The 2
RKE transmitter for at least 4 seconds, but no longer than
turn signal lights will flash to acknowledge the unlock
10 seconds. Then, press and hold the UNLOCK button
signal. The illuminated entry system will also turn on.
while still holding the LOCK button.
Remote Key Unlock, Driver Door/All First Press
2. Release both buttons at the same time.
This feature lets you program the system to unlock either
the driver’s door or all doors on the first press of the 3. Test the feature while outside of the vehicle by press-
UNLOCK button on the RKE transmitter. To change the ing the LOCK/UNLOCK buttons on the RKE transmitter
current setting, proceed as follows: with the ignition switch in the LOCK position and the
key removed.
• For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), refer to “Electronic Vehicle 4. Repeat these steps if you want to return this feature to
Information Center (EVIC)/Personal Settings its previous setting.
(Customer-Programmable Features)” in “Understand-
NOTE: Pressing the LOCK button on the RKE transmit-
ing Your Instrument Panel” for further information.
ter while you are inside the vehicle will activate the
Vehicle Security Alarm. Opening a door with the Vehicle
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Security Alarm activated will cause the alarm to sound. To Lock The Doors And Liftgate
Press the UNLOCK button to deactivate the Vehicle Press and release the LOCK button on the RKE transmit-
Security Alarm. ter to lock all doors and liftgate. The turn signal lights
will flash and the horn will chirp to acknowledge the
Illuminated Approach — If Equipped
signal.
This feature activates the headlights for up to 90 seconds
when the doors are unlocked with the RKE transmitter. Sound Horn With Remote Key Lock
The time for this feature is programmable on vehicles
This feature will cause the horn to chirp when the doors
equipped with the EVIC. Refer to “Electronic Vehicle
are locked with the RKE transmitter. This feature can be
Information Center (EVIC)/Personal Settings (Customer-
turned on or turned off. To change the current setting,
Programmable Features)” in “Understanding Your In-
proceed as follows:
strument Panel” for further information.
• For vehicles equipped with the EVIC, refer to “Elec-
NOTE: None of the courtesy lights will operate if the
tronic Vehicle Information Center (EVIC)/Personal
dimmer control is in the “defeat” position (extreme
Settings (Customer-Programmable Features)” in “Un-
downward position), unless the overhead map/reading
derstanding Your Instrument Panel” for further infor-
lights are turned on manually.
mation.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
• For vehicles not equipped with the EVIC, perform the NOTE: Pressing the LOCK button on the RKE transmit-
following steps: ter while you are in the vehicle will activate the Vehicle
Security Alarm. Opening a door with the Vehicle Security
1. Press the LOCK button on a programmed RKE trans-
Alarm activated will cause the alarm to sound. Press the 2
mitter for at least 4 seconds, but no longer than 10 sec-
UNLOCK button to deactivate the Vehicle Security
onds. Then, press the PANIC button while still holding
Alarm.
the LOCK button.
Flash Lights With Remote Key Lock/Unlock
2. Release both buttons at the same time.
This feature will cause the turn signal lights to flash when
3. Test the feature while outside of the vehicle by press-
the doors are locked or unlocked with the RKE transmit-
ing the LOCK button on the RKE transmitter with the
ter. This feature can be turned on or turned off. To change
ignition switch in the LOCK position and the key re-
the current setting, proceed as follows:
moved.
• For vehicles equipped with the EVIC, refer to “Elec-
4. Repeat these steps if you want to return this feature to
tronic Vehicle Information Center (EVIC)/Personal
its previous setting.
Settings (Customer-Programmable Features)” in “Un-
derstanding Your Instrument Panel” for further infor-
mation.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
• For vehicles not equipped with the EVIC, perform the Alarm activated will cause the alarm to sound. Press the
following steps: UNLOCK button to deactivate the Vehicle Security
Alarm.
1. Press and hold the UNLOCK button on a programmed
RKE transmitter for at least 4 seconds, but no longer than Using The Panic Alarm
10 seconds. Then, press and hold the LOCK button while To turn the Panic Alarm feature ON or OFF, press and
still holding the UNLOCK button. hold the PANIC button on the RKE transmitter for at
least one second and release. When the Panic Alarm is on,
2. Release both buttons at the same time.
the headlights and park lights will flash, the horn will
3. Test the feature while outside of the vehicle by press- pulse on and off and the interior lights will turn on.
ing the LOCK/UNLOCK buttons on the RKE transmitter
The Panic Alarm will stay on for three minutes unless
with the ignition switch in the LOCK position and the
you turn it off by pressing the PANIC button a second
key removed.
time or if the vehicle speed is 5 mph (8 km/h) or greater.
4. Repeat these steps if you want to return this feature to
NOTE: When you turn off the Panic Alarm by pressing
its previous setting.
the PANIC button a second time, you may have to move
NOTE: Pressing the LOCK button on the RKE transmit- closer to the vehicle due to the radio frequency noises of
ter while you are in the vehicle will activate the Vehicle the system.
Security Alarm. Opening a door with the Vehicle Security
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25
Programming Additional Transmitters If your RKE transmitter fails to operate from a normal
Refer to Sentry Key威 “Customer Key Programming.” distance, check for these two conditions:
If you do not have a programmed RKE transmitter, 1. Weak battery in the RKE transmitter. The expected life
contact your authorized dealer for details. of a battery is five years. 2
General Information 2. Closeness to a radio transmitter such as a radio station
This device complies with Part 15 of FCC rules and with tower, airport transmitter, military base, and some mobile
RS-210 of Industry Canada. Operation is subject to the or CB radios.
following conditions:
Transmitter Battery Replacement
1. This device may not cause harmful interference.
NOTE: Perchlorate Material – special handling may
2. This device must accept any interference that may be apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
received including interference that may cause undesired
The recommended replacement battery is CR2032.
operation.
NOTE: Changes or modifications not expressly ap-
proved by the party responsible for compliance could
void the user’s authority to operate the equipment.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
1. If the RKE transmitter is equipped with a screw, 2. Remove and replace the battery. Avoid touching the
remove the screw. With the RKE transmitter buttons new battery with your fingers. Skin oils may cause
facing down, use a flat blade screwdriver to pry the two battery deterioration. If you touch a battery, clean it with
halves of the RKE transmitter apart. Make sure not to rubbing alcohol.
damage the elastomer seal during removal.
3. To reassemble the RKE transmitter case, snap the two
halves together.
NOTE: If the RKE transmitter is equipped with a screw,
reinstall and tighten the screw until snug.

REMOTE STARTING SYSTEM — IF EQUIPPED

This system uses the Remote Keyless Entry
(RKE) transmitter to start the engine conve-
niently from outside the vehicle while still
maintaining security. The system has a range of
approximately 300 ft (91 m). Obstructions between the
vehicle and RKE transmitter may reduce this range.
Separating Case Halves
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27
NOTE: • RKE PANIC button not pressed
• The vehicle must be equipped with an automatic
• System not disabled from previous remote start event
transmission to be equipped with Remote Start.
• Vehicle theft alarm not active 2
• Obstructions between the vehicle and the Key Fob
may reduce this range.
WARNING!
How To Use Remote Start
• Do not start or run an engine in a closed garage or
All of the following conditions must be met before the
confined area. Exhaust gas contains Carbon Mon-
engine will remote start:
oxide (CO) which is odorless and colorless. Car-
• Shift lever in PARK bon Monoxide is poisonous and can cause serious
injury or death when inhaled.
• Doors closed
• Keep Remote Keyless Entry (RKE) transmitters
• Hood closed away from children. Operation of the Remote Start
• Hazard switch off System, windows, door locks or other controls
could cause serious injury or death.
• Brake switch inactive (brake pedal not pressed)
• Ignition key removed from ignition switch
• Battery at an acceptable charge level
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Remote Start Abort Message On Electronic Vehicle To Enter Remote Start
Information Center (EVIC) — If Equipped Press and release the REMOTE START button
The following messages will display in the EVIC if the on the RKE transmitter twice within five sec-
vehicle fails to remote start or exits remote start prema- onds. The parking lights will flash and the horn
turely: will chirp twice (if programmed). Then, the
engine will start and the vehicle will remain in the
• Remote Start Aborted — Door Ajar
Remote Start mode for a 15-minute cycle.
• Remote Start Aborted — Hood Ajar
NOTE:
• Remote Start Aborted — L/Gate Ajar • The park lamps will turn on and remain on during
Remote Start mode.
• Remote Start Aborted — Fuel Low
• For security, power window and power sunroof op-
• Remote Start Aborted — System Fault
eration (if equipped) are disabled when the vehicle is
The EVIC message stays active until the ignition is turned in the Remote Start mode.
to the ON/RUN position.
• If your power door locks were unlocked, Remote Start
will automatically lock the doors.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29
• The engine can be started two consecutive times (two To Exit Remote Start Mode Without Driving The
15-minute cycles) with the RKE transmitter. However, Vehicle
the ignition switch must be cycled to the ON/RUN Press and release the REMOTE START button one time,
position before you can repeat the start sequence for a or allow the engine to run for the entire 15-minute cycle. 2
third cycle.
NOTE: To avoid unintentional shut downs, the system
Remote start will also cancel if any of the following occur: will disable the one time press of the REMOTE START
button for two seconds after receiving a valid Remote
• The engine stalls or RPM exceeds 2500
Start request.
• Any engine warning lamps come on
To Exit Remote Start Mode And Drive The Vehicle
• Low Fuel Light turns on Before the end of the 15-minute cycle, press and release
the UNLOCK button on the RKE transmitter to unlock
• The hood is opened
the doors and disarm the Vehicle Security Alarm (if
• The hazard switch is pressed equipped). Then, insert the key into the ignition switch
and turn the switch to the ON/RUN position.
• The transmission is moved out of PARK
NOTE: The ignition switch must be in the ON/RUN
• The brake pedal is pressed
position in order to drive the vehicle.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
DOOR LOCKS
WARNING!
Manual Door Locks
• For personal security and safety in the event of an
Use the manual door lock knob to lock the doors from
accident, lock the vehicle doors as you drive as
inside the vehicle. If the lock knob is down when the door
well as when you park and leave the vehicle.
is closed, the door will lock. Make sure the keys are not
inside the vehicle before closing the door. • Before exiting a vehicle, always apply the parking
brake, shift the transmission into PARK, and re-
move the key fob from the ignition. When leaving
the vehicle, always lock your vehicle.
• Never leave children alone in a vehicle, or with
access to an unlocked vehicle.
• Allowing children to be in a vehicle unattended is
dangerous for a number of reasons. A child or
others could be seriously or fatally injured. Chil-
dren should be warned not to touch the parking
brake, brake pedal or the shift lever.
(Continued)

Manual Door Lock Knob

 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31
NOTE: To prevent from locking the key in the vehicle,
WARNING! (Continued)
the power door lock switch will not operate when the key
• Do not leave the key fob in or near the vehicle, and is in the ignition and either front door is open. A chime
do not leave the ignition in the ACC or ON/RUN will sound as a reminder to remove the key.
position. A child could operate power windows, 2
other controls, or move the vehicle.

CAUTION!
An unlocked vehicle is an invitation to thieves.
Always remove the key from the ignition and lock all
of the doors when leaving the vehicle unattended.

Power Door Locks

A power door lock switch is located on the driver’s and
front passenger’s door panel. Press this switch to lock or
unlock the doors and liftgate. Driver Power Door Lock Switch
1 - Unlock 2 - Lock
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Auto Lock Doors — If Equipped • For vehicles not equipped with the EVIC, perform the
The auto door lock feature default condition is enabled. following procedure:
When enabled, the door locks will lock automatically
1. Close all doors and place the key in the ignition
when the vehicle’s speed exceeds 15 mph (24 km/h). The
switch.
auto door lock feature can be enabled or disabled by your
authorized dealer. Please see your authorized dealer for 2. Within 15 seconds, cycle the ignition switch between
service. LOCK and ON/RUN and then back to LOCK four times
ending up in the LOCK position (do not start the engine).
Auto Lock Doors Programming
The Automatic Door Locks feature can be enabled or 3. Within 30 seconds, press the power door LOCK switch
disabled as follows: to lock the doors.
• For vehicles equipped with the Electronic Vehicle 4. A single chime will indicate the completion of the
Information Center (EVIC), refer to “Electronic Vehicle programming.
Information Center (EVIC) — If Equipped/Personal
5. Repeat these steps if you want to return this feature to
Settings (Customer Programmable Features)” in “Un-
its previous setting.
derstanding Your Instrument Panel” for further infor-
mation.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33
NOTE: Automatic Unlock Doors On Exit Programming
• If you do not hear the chime it means that the system The Automatic Unlock Doors On Exit feature can be
did not enter the programming mode and you will enabled or disabled as follows:
need to repeat the procedure. 2
• For vehicles equipped with the EVIC, refer to “Elec-
• Use the Automatic Door Lock feature in accordance tronic Vehicle Information Center (EVIC) — If
with local laws. Equipped/Personal Settings (Customer-Program-
mable Features)” in “Understanding Your Instrument
Automatic Unlock Doors On Exit
Panel” for further information.
The doors will unlock automatically if:
• For vehicles not equipped with the EVIC, perform the
1. The Automatic Unlock Doors On Exit feature is en-
following procedure:
abled.
1. Close all doors and place the key in the ignition.
2. The transmission was in gear and the vehicle speed
returned to 0 mph (0 km/h). 2. Within 15 seconds, cycle the ignition switch between
LOCK and ON/RUN and then back to LOCK five times
3. The transmission is in NEUTRAL or PARK.
ending up in the ON/RUN position (do not start the
4. The driver’s door is opened. engine).
5. The doors were not previously unlocked. 3. Within 30 seconds, press the power door UNLOCK
switch to unlock the doors.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
4. A single chime will indicate the completion of the Child-Protection Door Lock System — Rear
programming. Doors
To provide a safer environment for small children riding
5. Repeat these steps if you want to return this feature to
in the rear seats, the rear doors are equipped with
its previous setting.
Child-Protection Door Lock system.
NOTE:
To Engage Or Disengage The Child-Protection
• If you do not hear the chime it means that the system
Door Lock System
did not enter the programming mode and you will
need to repeat the procedure. 1. Open the rear door.
• Use the Automatic Unlock Doors On Exit feature in 2. Insert the tip of the ignition key into the lock and
accordance with local laws. rotate to the LOCK or UNLOCK position.
3. Repeat steps 1 and 2 for the opposite rear door.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35

Child-Protection Door Lock Location Child-Protection Door Lock Function

WARNING!
Avoid trapping anyone in a vehicle in a collision.
Remember that the rear doors can only be opened
from the outside when the Child-Protection locks are
engaged.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
NOTE: For emergency exit with the system engaged, • For vehicles equipped with the EVIC, the power
move the lock knob up (unlocked position), roll down the window switches will remain active for up to 10 min-
window and open the door with the outside door handle. utes after the ignition switch is turned to the LOCK
position. Opening either front door will cancel this
POWER WINDOWS — IF EQUIPPED feature. The time for this feature is programmable.
Power Window Switches Refer to “Electronic Vehicle Information Center
The window controls on the driver’s door trim panel (EVIC)/Personal Settings (Customer-Programmable
control all the door windows. There are single window Features)” in “Understanding Your Instrument Panel”
controls on each passenger door trim panel, which oper- for further information.
ate the passenger door windows. The window controls
will operate when the ignition switch is in the ON/RUN WARNING!
or ACC position. Never leave children in a vehicle with the key in the
NOTE: ignition switch. Occupants, particularly unattended
• For vehicles not equipped with the Electronic Vehicle children, can become entrapped by the windows
Information Center (EVIC), the power window while operating the power window switches. Such
switches will remain active for 45 seconds after the entrapment may result in serious injury or death.
ignition switch is turned to the LOCK position. Open-
ing either front door will cancel this feature.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37
Window Lockout Switch
The window lockout switch on the driver’s door allows
you to disable the window control on the other doors. To
disable the window controls on the other doors, press the 2
window LOCKOUT switch. To enable the window con-
trols, press the window LOCKOUT switch a second time.

Power Window Switch Location

Auto-Down
The driver’s door window switch has an Auto-Down
feature. Push the window switch past the first detent,
release, and the window will go down automatically. To
cancel the Auto-Down movement, operate the switch in
either the up or down direction and release the switch. Window Lockout Switch
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
LIFTGATE
NOTE: The key that is used to start the vehicle is also
used to lock or unlock the doors and open the liftgate.
To unlock the liftgate, insert the key into the lock and
turn it to the right (manual lock models only). The liftgate
can also be unlocked using the Remote Keyless Entry
(RKE) transmitter or by activating the power door lock
switches located on the front doors. The central locking/
unlocking feature (if equipped) can be activated from the
liftgate key cylinder.
Once unlocked, the liftgate can be opened or closed Liftgate Release Location
without using the key. To open the liftgate, squeeze the
NOTE:
liftgate release and pull the liftgate open with one fluid
• In the event of a power malfunction, or the RKE
motion.
transmitter is inoperative, insert the key into the
liftgate lock cylinder and turn to the right (manual
lock models only). Using the liftgate handle, pull the
liftgate open with one fluid motion.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39
• Although the liftgate has no inside release mechanism, Gas props support the liftgate in the open position.
the liftgate trim panel includes an opening with a However, because the gas pressure drops with tempera-
snap-in cap that provides access to release the latch in ture, it may be necessary to assist the props when
the event of an electrical system malfunction. opening the liftgate in cold weather. 2
WARNING! OCCUPANT RESTRAINTS
Some of the most important safety features in your
• Driving with the liftgate open can allow poison- vehicle are the restraint systems:
ous exhaust gases into your vehicle. You and your
passengers could be injured by these fumes. Keep • Three-point lap and shoulder belts for the driver and
the liftgate closed when you are operating the all passengers
vehicle. • Advanced Front Air Bags for driver and front passen-
• If you are required to drive with the liftgate open, ger
make sure that all windows are closed, and the
climate control blower switch is set at high speed. • Supplemental Active Head Restraints (AHR) located
Do not use the recirculation mode. on top of the front seats (integrated into the head
restraint) — if equipped
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
• Supplemental Side Air Bag Inflatable Curtains (SABIC) Please pay close attention to the information in this section.
for the driver and passengers seated next to a window It tells you how to use your restraint system properly, to
keep you and your passengers as safe as possible.
• Supplemental Seat-Mounted Side Air Bags (SAB) — if
equipped If you will be carrying children too small for adult-sized
seat belts, the seat belts or the Lower Anchors and Tether
• An energy-absorbing steering column and steering
for CHildren (LATCH) feature also can be used to hold
wheel
infant and child restraint systems. For more information
• Knee bolsters for front seat occupants on LATCH, see Lower Anchors and Tether for CHildren
(LATCH).
• Front seat belts incorporate pretensioners that may
enhance occupant protection by managing occupant NOTE: The Advanced Front Air Bags have a multistage
energy during an impact event inflator design. This allows the air bag to have different
rates of inflation based on several factors, including the
• All seat belt systems (except the driver’s) include
severity and type of collision.
Automatic Locking Retractors (ALRs), which lock the
seat belt webbing into position by extending the belt Here are some simple steps you can take to minimize the
all the way out and then adjusting the belt to the risk of harm from a deploying air bag:
desired length to restrain a child seat or secure a large
1. Children 12 years old and under should always ride
item in a seat — if equipped
buckled up in a rear seat.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41
You should read the instructions provided with your
WARNING!
child restraint to make sure that you are using it properly.
Infants in rear facing child restraints should never
2. All occupants should always wear their lap and
ride in the front seat of a vehicle with a passenger 2
shoulder belts properly.
Advanced Front Air Bag. An air bag deployment can
cause severe injury or death to infants in that position. 3. The driver and front passenger seats should be
moved back as far as practical to allow the Advanced
Children that are not big enough to wear the vehicle seat Front Air Bags room to inflate.
belt properly (see section on Child Restraints) should be
4. Do not lean against the door or window. If your
secured in the rear seat in child restraints or belt-
vehicle has side air bags, and deployment occurs, the
positioning booster seats. Older children who do not use
side air bags will inflate forcefully into the space
child restraints or belt-positioning booster seats should
between you and the door.
ride properly buckled up in the rear seat. Never allow
children to slide the shoulder belt behind them or under 5. If the air bag system in this vehicle needs to be
their arm. modified to accommodate a disabled person, contact
the Customer Center. Phone numbers are provided
If a child from 1 to 12 years old (not in a rear facing child
under ⴖIf You Need Assistanceⴖ.
seat) must ride in the front passenger seat, move the seat
as far back as possible and use the proper child restraint.
(Refer to “Child Restraints”)
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

WARNING! WARNING! (Continued)

• Relying on the air bags alone could lead to more • Supplemental Side Air Bag Inflatable Curtain
severe injuries in a collision. The air bags work (SABIC) and Seat-Mounted Side Air Bags (SAB)
with your seat belt to restrain you properly. In also need room to inflate. Do not lean against the
some collisions, the air bags won’t deploy at all. door or window. Sit upright in the center of the
Always wear your seat belts even though you have seat.
air bags. • In a collision, you and your passengers can suffer
• Being too close to the steering wheel or instrument much greater injuries if you are not properly
panel during Advanced Front Air Bag deployment buckled up. You can strike the interior of your
could cause serious injury, including death. Air vehicle or other passengers, or you can be thrown
Bags need room to inflate. Sit back, comfortably out of the vehicle. Always be sure you and others
extending your arms to reach the steering wheel or in your vehicle are buckled up properly.
instrument panel.
Buckle up even though you are an excellent driver, even
(Continued) on short trips. Someone on the road may be a poor driver
and cause a collision that includes you. This can happen
far away from home or on your own street.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43
Research has shown that seat belts save lives, and they
WARNING!
can reduce the seriousness of injuries in a collision. Some
of the worst injuries happen when people are thrown • It is dangerous to ride in a cargo area, inside or
from the vehicle. Seat belts reduce the possibility of outside of a vehicle. In a collision, people riding in 2
ejection and the risk of injury caused by striking the these areas are more likely to be seriously injured
inside of the vehicle. Everyone in a motor vehicle should or killed.
be belted at all times. • Do not allow people to ride in any area of your
Lap/Shoulder Belts vehicle that is not equipped with seats and seat
All seating positions in your vehicle are equipped with belts.
lap/shoulder belts. • Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
The belt webbing retractor is designed to lock during • Wearing a seat belt incorrectly is dangerous. Seat
very sudden stops or collisions. This feature allows the belts are designed to go around the large bones of
shoulder part of the belt to move freely with you under your body. These are the strongest parts of your
normal conditions. However, in a collision the belt will body and can take the forces of a collision the best.
lock and reduce the risk of you striking the inside of the
vehicle or being thrown out. (Continued)
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
2. The seat belt latch plate is along side the pillar near the
WARNING! (Continued)
back of your seat. Grasp the latch plate and pull out the
• Wearing your belt in the wrong place could make belt. Slide the latch plate up the webbing as far as
your injuries in a collision much worse. You might necessary to allow the belt to go around your lap.
suffer internal injuries, or you could even slide out
of part of the belt. Follow these instructions to
wear your seat belt safely and to keep your pas-
sengers safe, too.
• Two people should never be belted into a single
seat belt. People belted together can crash into one
another in a collision, hurting one another badly.
Never use a lap/shoulder belt or lap belt for more
than one person, no matter what their size.

Lap/Shoulder Belt Operating Instructions

1. Enter the vehicle and close the door. Sit back and
adjust the seat. Pulling Out The Latch Plate
3. When the belt is long enough to fit, insert the latch
plate into the buckle until you hear a “click.”
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45

WARNING!
• A belt that is buckled into the wrong buckle will
not protect you properly. The lap portion could 2
ride too high on your body, possibly causing
internal injuries. Always buckle your belt into the
buckle nearest you.
• A belt that is too loose will not protect you
properly. In a sudden stop you could move too far
forward, increasing the possibility of injury. Wear
your seat belt snugly.

Inserting Latch Plate Into Buckle (Continued)

46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
4. Position the lap belt across your thighs, below your
WARNING! (Continued)
abdomen. To remove slack in the lap belt portion, pull up
• A belt that is worn under your arm is dangerous. on the shoulder belt. To loosen the lap belt if it is too tight,
Your body could strike the inside surfaces of the tilt the latch plate and pull on the lap belt. A snug belt
vehicle in a collision, increasing head and neck reduces the risk of sliding under the belt in a collision.
injury. A belt worn under the arm can cause
internal injuries. Ribs aren’t as strong as shoulder
bones. Wear the belt over your shoulder so that
your strongest bones will take the force in a
collision.
• A shoulder belt placed behind you will not protect
you from injury during a collision. You are more
likely to hit your head in a collision if you do not
wear your shoulder belt. The lap and shoulder belt
are meant to be used together.

Positioning Lap Belt

 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47
6. To release the belt, push the red button on the buckle.
WARNING!
The belt will automatically retract to its stowed position.
• A lap belt worn too high can increase the risk of If necessary, slide the latch plate down the webbing to
internal injury in a collision. The belt forces won’t allow the belt to retract fully. 2
be at the strong hip and pelvic bones, but across
your abdomen. Always wear the lap belt as low as WARNING!
possible and keep it snug.
A frayed or torn belt could rip apart in a collision and
• A twisted belt may not protect you properly. In a leave you with no protection. Inspect the belt system
collision, it could even cut into you. Be sure the
periodically, checking for cuts, frays, or loose parts.
belt is straight. If you can’t straighten a belt in Damaged parts must be replaced immediately. Do
your vehicle, take it to your authorized dealer
not disassemble or modify the system. Seat belt
immediately and have it fixed. assemblies must be replaced after a collision if they
have been damaged (bent retractor, torn webbing,
5. Position the shoulder belt on your chest so that it is
etc.).
comfortable and not resting on your neck. The retractor
will withdraw any slack in the belt.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Adjustable Upper Shoulder Belt Anchorage
In the front seat, the shoulder belt can be adjusted
upward or downward to position the belt away from
your neck. Push the anchorage button to release the
anchorage, and move it up or down to the position that
fits you best.
NOTE: The adjustable upper shoulder belt anchorage is
equipped with an Easy Up feature. This feature allows
the shoulder belt anchorage to be adjusted in the upward
position without pressing the release button. To verify
the shoulder belt anchorage is latched, pull downward
on the shoulder belt anchorage until it is locked into Adjustable Anchorage
position.
As a guide, if you are shorter than average you will
prefer a lower position, and if you are taller than average
you will prefer a higher position. When you release the
anchorage, try to move it down to make sure that it is
locked in position.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49
In the rear seat, move toward the center of the seat to
position the belt away from your neck.
Second Row Center Lap/Shoulder Belt Operating
Instructions 2
The second row center lap/shoulder belt features a
three-point seat belt with a mini-latch and buckle, which
allows the shoulder belt to detach from the lower anchor
when the seat is folded. The mini-buckle and shoulder
belt can then be stored out of the way in the right side
trim panel for added convenience.
1. Remove the mini-latch and regular latch from its
stowed position in the right rear side trim panel. Mini-Latch Stowage
2. Grasp the mini-latch plate and pull the belt over the
seat.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3. Route the shoulder belt to the inside of the right head 5. Sit back in the seat. Slide the regular latch plate up the
restraint. webbing as far as necessary to allow the belt to go around
your lap.
6. When the belt is long enough to fit, insert the latch
plate into the buckle until you hear a “click.”

Routing The Rear Center Shoulder Belt

4. When the belt is long enough to fit, insert the mini-
latch plate into the mini-buckle until you hear a “click.”
Connecting Mini-Latch To Buckle
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51
7. Position the lap belt across your thighs, below your 8. Position the shoulder belt on your chest so that it is
abdomen. To remove slack in the lap belt portion, pull up comfortable and not resting on your neck. The retractor
on the shoulder belt. To loosen the lap belt if it is too tight, will withdraw any slack in the belt.
pull on the lap belt. A snug belt reduces the risk of sliding 2
9. To release the belt, push the red button on the buckle.
under the belt in a collision.

Detaching Mini-Latch And Buckle

Rear Center Seat Belt Buckled
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
10. To disengage the mini-latch from the mini-buckle for 4. Continue to slide the latch plate up until it clears the
storage, insert the regular latch plate into the black folded webbing.
button on the top of the mini-buckle. The belt will
Seat Belts In Passenger Seating Positions
automatically retract to its stowed position. If necessary,
The seat belts in the passenger seating positions are
slide the latch plate down the webbing to allow the belt
equipped with Automatic Locking Retractors (ALR)
to retract fully. Insert the mini-latch plate into the slot
provided in the trim panel. which are used to secure a child restraint system. For
additional information, refer to “Installing Child Re-
Lap/Shoulder Belt Untwisting Procedure straints Using The Vehicle Seat Belt” under the “Child
Use the following procedure to untwist a twisted lap/ Restraints” section. The chart below defines the type of
shoulder belt. feature for each seating position.
1. Position the latch plate as close as possible to the Driver Center Passenger
anchor point. First Row N/A N/A ALR
2. At about 6 to 12 in (15 to 30 cm) above the latch plate, Second Row ALR ALR ALR
grasp and twist the belt webbing 180 degrees to create a • N/A — Not Applicable
fold that begins immediately above the latch plate.
• ALR — Automatic Locking Retractor
3. Slide the latch plate upward over the folded webbing.
The folded webbing must enter the slot at the top of the
latch plate.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53
If the passenger seating position is equipped with an position that has a belt with this feature. Children
ALR and is being used for normal usage: 12 years old and under should always be properly
restrained in the rear seat.
Only pull the belt webbing out far enough to comfortably
wrap around the occupant’s mid-section so as to not How To Engage The Automatic Locking Mode 2
activate the ALR. If the ALR is activated, you will hear a
1. Buckle the combination lap and shoulder belt.
ratcheting sound as the belt retracts. Allow the webbing
to retract completely in this case and then carefully pull 2. Grasp the shoulder portion and pull downward until
out only the amount of webbing necessary to comfort- the entire belt is extracted.
ably wrap around the occupant’s mid-section. Slide the
3. Allow the belt to retract. As the belt retracts, you will
latch plate into the buckle until you hear a ⬙click.⬙
hear a clicking sound. This indicates the safety belt is
Automatic Locking Retractor Mode (ALR) — now in the Automatic Locking Mode.
If Equipped
How To Disengage The Automatic Locking Mode
In this mode, the shoulder belt is automatically pre-
Unbuckle the combination lap/shoulder belt and allow it
locked. The belt will still retract to remove any slack in
to retract completely to disengage the Automatic Locking
the shoulder belt. The Automatic Locking Mode is avail-
Mode and activate the vehicle sensitive (emergency)
able on all passenger-seating positions with a combina-
locking mode.
tion lap/shoulder belt. Use the Automatic Locking Mode
anytime a child safety seat is installed in a seating
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Seat Belt Pretensioners
WARNING!
The seat belts for both front seating positions are
• The belt and retractor assembly must be replaced equipped with pretensioning devices that are designed to
if the seat belt assembly Automatic Locking Re- remove slack from the seat belt in the event of a collision.
tractor (ALR) feature or any other seat belt func- These devices may improve the performance of the seat
tion is not working properly when checked ac- belt by assuring that the belt is tight about the occupant
cording to the procedures in the Service Manual. early in a collision. Pretensioners work for all size occu-
• Failure to replace the belt and retractor assembly pants, including those in child restraints.
could increase the risk of injury in collisions. NOTE: These devices are not a substitute for proper seat
belt placement by the occupant. The seat belt still must be
Energy Management Feature worn snugly and positioned properly.
This vehicle has a safety belt system with an Energy
Management feature in the front seating positions to help The pretensioners are triggered by the Occupant Re-
further reduce the risk of injury in the event of a head-on straint Controller (ORC). Like the air bags, the preten-
collision. This safety belt system has a retractor assembly sioners are single use items. A deployed pretensioner or
that is designed to release webbing in a controlled a deployed air bag must be replaced immediately.
manner. This feature is designed to help reduce the belt
force acting on the occupant’s chest.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55
Supplemental Active Head Restraints (AHR) — the Active Head Restraints (AHR) to deploy. If a rear
If Equipped impact requires deployment, both the driver and front
These head restraints are passive, deployable compo- passenger seat AHRs will be deployed.
nents, and vehicles with this equipment cannot be readily 2
When AHRs deploy during a rear impact, the front half
identified by any markings, only through visual inspec-
of the head restraint extends forward to minimize the gap
tion of the head restraint. The head restraint will be split
between the back of the occupant’s head and the AHR.
in two halves, with the front half being soft foam and
This system is designed to help prevent or reduce the
trim, the back half being decorative plastic.
extent of injuries to the driver and front passenger in
How The Active Head Restraints (AHR) Work certain types of rear impacts.
The Occupant Restraint Controller (ORC) determines
whether the severity, or type of rear impact will require
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
NOTE: The Active Head Restraints (AHR) may or may
not deploy in the event of a front or side impact.
However if during a front impact, a secondary rear
impact occurs, the AHR may deploy based on several
factors, including the severity and type of the impact.

Active Head Restraint (AHR) Components

1 — Head Restraint Front Half 3 — Head Restraint Back Half
(Soft Foam and Trim) (Decorative Plastic Rear
Cover)
2 — Seatback 4 — Head Restraint Guide
Tubes
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57
1. Grasp the deployed AHR from the rear seat.
CAUTION!
All occupants, including the driver, should not oper-
ate a vehicle or sit in a vehicle’s seat until the head 2
restraints are placed in their proper positions in order
to minimize the risk of neck injury in the event of a
collision.

NOTE: For more information on properly adjusting and

positioning the head restraint, refer to “Adjusting Active
Head Restraints” in “Understanding The Features Of
Your Vehicle”.
Resetting Active Head Restraints (AHR)
Hand Positioning Points On AHR
If the Active Head Restraints are triggered in a collision,
you must reset the head restraint on the driver’s and 2. Position the hands on the top of the deployed AHR at
front passenger seat. You can recognize when the Active a comfortable position.
Head Restraint has been triggered by the fact that they
have moved forward (as shown in step three of the
resetting procedure).
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3. Pull down then rearward towards the rear of the
vehicle then down to engage the locking mechanism.

3 — Final Downward Movement To Engage Locking Mechanism

4. The AHR front soft foam and trim half should lock
1 — Downward Movement into the back decorative plastic half.
2 — Rearward Movement
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59
Enhanced Seat Belt Use Reminder System
(BeltAlert姞)
BeltAlert威 is a feature intended to remind the driver and
front passenger (if equipped with front passenger 2
BeltAlert威) to fasten their seat belts. The feature is active
whenever the ignition is on. If the driver or front seat
passenger is unbelted, the Seat Belt Reminder Light will
turn on and remain on until both front seat belts are
fastened.
The BeltAlert威 warning sequence begins after the vehicle
speed is over 5 mph (8 km/h), by blinking the Seat Belt
AHR In Reset Position Reminder Light and sounding an intermittent chime.
Once the sequence starts, it will continue for the entire
NOTE:
duration or until the respective seatbelts are fastened.
• If you have difficulties or problems resetting the
After the sequence completes, the Seat Belt Reminder
Active Head Restraints, see an authorized dealer.
Light remains illuminated until the respective seat belts
• For safety reasons, have the Active Head Restraints are fastened. The driver should instruct all other occu-
checked by a qualified specialist at an authorized pants to fasten their seat belts. If a front seat belt is
dealer.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
unbuckled while traveling at speeds greater than 5 mph Seat Belt Extender
(8 km/h), BeltAlert威 will provide both audio and visual If a seat belt is too short, even when fully extended, and
notification. when the adjustable upper shoulder belt anchorage (if
equipped) is in its lowest position, your authorized
The front passenger seat BeltAlert威 is not active when the
dealer can provide you with a seat belt extender. This
front passenger seat is unoccupied. BeltAlert威 may be
extender should be used only if the existing belt is not
triggered when an animal or heavy object is on the front
long enough. When it is not required, remove the ex-
passenger seat or when the seat is folded flat (if
tender and store it.
equipped). It is recommended that pets be restrained in
the rear seat in pet harnesses or pet carriers that are
WARNING!
secured by seat belts, and cargo is properly stowed.
Using a seat belt extender when not needed can
BeltAlert威 can be enabled or disabled by your authorized
increase the risk of injury in a collision. Only use
dealer. Chrysler Group LLC does not recommend deac-
when the seat belt is not long enough when it is worn
tivating BeltAlert威.
low and snug, and in the recommended seating
NOTE: Although BeltAlert威 has been deactivated, the positions. Remove and store the extender when not
Seat Belt Reminder Light will continue to illuminate needed.
while the driver’s or front passenger (if equipped with
BeltAlert威) seat belt remains unfastened.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61
Seat Belts And Pregnant Women
We recommend that pregnant women use the seat belts
throughout their pregnancy. Keeping the mother safe is
the best way to keep the baby safe. 2
Pregnant women should wear the lap part of the belt
across the thighs and as snug across the hips as possible.
Keep the belt low so that it does not come across the
abdomen. That way the strong bones of the hips will take
the force if there is a collision.
Supplemental Restraint System (SRS) — Air Bags
Advanced Front Air Bag And Knee Bolster Locations
This vehicle has Advanced Front Air Bags for both the
1 — Driver And Passenger 2 — Knee Bolster
driver and front passenger as a supplement to the seat Advanced Front Air Bags
belt restraint systems. The driver’s Advanced Front Air
Bag is mounted in the center of the steering wheel. The NOTE: The Driver and Front Passenger Advanced Front
passenger’s Advanced Front Air Bag is mounted in the Air Bags are certified to the new Federal regulations for
instrument panel, above the glove compartment. The Advanced Air Bags.
words SRS AIRBAG are embossed on the air bag covers.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
The Advanced Front Air Bags have a multistage inflator This vehicle may be equipped with Supplemental Seat-
design. This allows the air bag to have different rates of Mounted Side Air Bags (SAB) to provide enhanced
inflation that are based on several factors, including the protection for an occupant during a side impact. The
severity and type of collision. Supplemental Seat-Mounted Side Air Bags are located in
the outboard side of the front seats.
This vehicle may be equipped with driver and/or front
passenger seat track position sensors that may adjust the NOTE:
inflation rate of the Advanced Front Air Bags based upon • Air Bag covers may not be obvious in the interior trim,
seat position. but they will open during air bag deployment.
This vehicle may be equipped with a driver and/or front • After any accident, the vehicle should be taken to an
passenger seat belt buckle switch that detects whether authorized dealer immediately.
the driver or front passenger seat belt is fastened. The
Air Bag System Components
seat belt buckle switch may adjust the inflation rate of the
Your vehicle may be equipped with the following air bag
Advanced Front Air Bags.
system components:
This vehicle is equipped with Supplemental Side Air Bag
• Occupant Restraint Controller (ORC)
Inflatable Curtains (SABIC) to protect the driver, front,
and rear passengers sitting next to a window. The SABIC • Air Bag Warning Light
are located above the side windows. The trim covering
• Steering Wheel and Column
the side air bags is labeled SRS AIRBAG.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63
• Instrument Panel Advanced Front Air Bag Features
The Advanced Front Air Bag system has multistage
• Knee Impact Bolster
driver and front passenger air bags. This system provides
• Driver Advanced Front Air Bag output appropriate to the severity and type of collision as 2
determined by the Occupant Restraint Controller (ORC),
• Passenger Advanced Front Air Bag
which may receive information from the front impact
• Supplemental Seat-Mounted Side Air Bags (SAB) sensors.
• Supplemental Side Air Bag Inflatable Curtains The first stage inflator is triggered immediately during an
(SABIC) impact that requires air bag deployment. This low output
is used in less severe collisions. A higher energy output is
• Front and Side Impact Sensors
used for more severe collisions.
• Front Seat Belt Pretensioners, Seat Belt Buckle Switch,
and Seat Track Position Sensors
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Supplemental Seat-Mounted Side Air Bags (SAB)
WARNING!
— If Equipped
• No objects should be placed over or near the air Supplemental Seat-Mounted Side Air Bags (SAB) may
bag on the instrument panel, because any such provide enhanced protection to help protect an occupant
objects could cause harm if the vehicle is in a during a side impact. The SAB is marked with an air bag
collision severe enough to cause the air bag to label sewn into the outboard side of the front seats.
inflate.
• Do not put anything on or around the air bag
covers or attempt to open them manually. You may
damage the air bags and you could be injured
because the air bags may no longer be functional.
The protective covers for the air bag cushions are
designed to open only when the air bags are
inflating.
• Do not drill, cut or tamper with the knee bolster in
any way.
• Do not mount any accessories to the knee bolster
such as alarm lights, stereos, citizen band radios,
etc. Supplemental Seat-Mounted Side Air Bag Label
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65
When the air bag deploys, it opens the seam between the
front and side of the seat’s trim cover. Each air bag
deploys independently; a left side impact deploys the left
air bag only and a right-side impact deploys the right air 2
bag only.
Supplemental Side Air Bag Inflatable Curtain
(SABIC)
SABIC air bags may offer side-impact and vehicle roll-
over protection to front and rear seat outboard occupants
in addition to that provided by the body structure. Each
air bag features inflated chambers placed adjacent to the
head of each outboard occupant that reduce the potential Side Curtain Air Bag Label Location
for side-impact head injuries. The SABIC air bags deploy
NOTE:
downward, covering both windows on the impact side.
• Should a vehicle rollover occur, the pretensioners
and/or SAB and SABIC curtains on both sides of the
vehicle may deploy.
• Air Bag covers may not be obvious in the interior trim,
but they will open during air bag deployment.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
• Being too close to the Supplemental Side Air Bag
WARNING! (Continued)
Inflatable Curtain and/or Seat-Mounted Side Air Bag
during deployment could cause you to be severely • Do not use accessory seat covers or place objects
injured or killed. between you and the side air bags; the perfor-
mance could be adversely affected and/or objects
The system includes side impact sensors that are cali- could be pushed into you, causing serious injury.
brated to deploy the side air bags during impacts that • If your vehicle is equipped with SABIC air bags,
require air bag occupant protection. do not have any accessory items installed which
will alter the roof, including adding a sunroof to
WARNING! your vehicle. Do not add roof racks that require
• Your vehicle is equipped with left and right permanent attachments (bolts or screws) for instal-
Supplemental Side Air Bag Inflatable Curtain lation on the vehicle roof. Do not drill into the roof
(SABIC), do not stack luggage or other cargo up of the vehicle for any reason.
high enough to block the location of the SABIC.
The area where the SABIC is located should re- Knee Impact Bolsters
main free from any obstructions. The Knee Impact Bolsters help protect the knees of the
driver and the front passenger, and position front occu-
(Continued) pants for the best interaction with the Advanced Front
Air Bags.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67
Along with seat belts and pretensioners, Advanced Front Advanced Front Air Bags are designed to provide addi-
Air Bags work with the knee bolsters to provide im- tional protection by supplementing the seat belts in
proved protection for the driver and front passenger. Side certain frontal collisions depending on several factors,
air bags also work with seat belts to improve occupant including the severity and type of collision. Advanced 2
protection. Front Air Bags are not expected to reduce the risk of
injury in rear, side, or rollover collisions.
Air Bag Deployment Sensors And Controls
The Advanced Front Air Bags will not deploy in all
Occupant Restraint Controller (ORC)
frontal collisions, including some that may produce sub-
The ORC is part of a Federally regulated safety system
stantial vehicle damage — for example, some pole colli-
required for this vehicle.
sions, truck underrides, and angle offset collisions. On
The ORC determines if deployment of the front and/or the other hand, depending on the type and location of
side air bags in a frontal or side collision is required. impact, Advanced Front Air Bags may deploy in crashes
Based on the impact sensor’s signals, a central electronic with little vehicle front-end damage but that produce a
ORC deploys the Advanced Front Air Bags, SABIC air severe initial deceleration.
bags, Supplemental Seat-Mounted Side Air Bags — if
The side air bags will not deploy in all side collisions.
equipped, and front seat belt pretensioners, as required,
Side air bag deployment will depend on the severity and
depending on several factors, including the severity and
type of collision.
type of impact.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Because air bag sensors measure vehicle deceleration Also, the ORC turns on the Air Bag Warning
over time, vehicle speed and damage by themselves are Light in the instrument panel for approxi-
not good indicators of whether or not an air bag should mately four to eight seconds for a self-check
have deployed. when the ignition is first turned on. After the
self-check, the Air Bag Warning Light will turn off. If the
Seat belts are necessary for your protection in all colli-
ORC detects a malfunction in any part of the system, it
sions, and also are needed to help keep you in position,
turns on the Air Bag Warning Light, either momentarily
away from an inflating air bag.
or continuously. A single chime will sound if the light
The ORC monitors the readiness of the electronic parts of comes on again after initial startup.
the air bag system whenever the ignition switch is in the
It also includes diagnostics that will illuminate the instru-
START or ON/RUN position. If the key is in the OFF
ment cluster Air Bag Warning Light if a malfunction is
position, in the ACC position, or not in the ignition, the
noted that could affect the air bag system. The diagnos-
air bag system is not on and the air bags will not inflate.
tics also record the nature of the malfunction.
The ORC contains a backup power supply system that
may deploy the air bags even if the battery loses power or
it becomes disconnected prior to deployment.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69
are possible, based on the collision type and severity. The
WARNING!
steering wheel hub trim cover and the upper right side of
Ignoring the Air Bag Warning Light in your instru- the instrument panel separate and fold out of the way as
ment panel could mean you won’t have the air bags the air bags inflate to their full size. The air bags fully 2
to protect you in a collision. If the light does not come inflate in about 50 to 70 milliseconds. This is about half of
on as a bulb check when the ignition is first turned the time it takes to blink your eyes. The air bags then
on, stays on after you start the vehicle, or if it comes quickly deflate while helping to restrain the driver and
on as you drive, have an authorized dealer service the front passenger.
air bag system immediately.
The Advanced Front Air Bag gas is vented through the
vent holes in the sides of the air bag. In this way, the air
Driver And Passenger Advanced Front Air Bag
bags do not interfere with your control of the vehicle.
Inflator Units
The Driver and Passenger Advanced Front Air Bag Supplemental Seat-Mounted Side Air Bag (SAB)
Inflator Units are located in the center of the steering Inflator Units — If Equipped
wheel and on the right side of the instrument panel. The Supplemental Seat-Mounted Side Air Bags (SAB) are
When the ORC detects a collision requiring the Ad- designed to activate only in certain side collisions.
vanced Front Air Bags, it signals the inflator units. A large
The ORC determines if a side collision requires the side
quantity of non-toxic gas is generated to inflate the
air bags to inflate, based on several factors, including the
Advanced Front Air Bags. Different air bag inflation rates
severity and type of collision.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Based on several factors, including the severity and type A quantity of non-toxic gas is generated to inflate the side
of collision, the side air bag inflator on the crash side of curtain air bag. The inflating side curtain air bag pushes
the vehicle may be triggered, releasing a quantity of the outside edge of the headliner out of the way and
non-toxic gas. The inflating SAB exits through the seat covers the window. The air bag inflates in about 30 milli-
seam into the space between the occupant and the door. seconds (about one-quarter of the time that it takes to
The SAB fully inflate in about 10 milliseconds. The side blink your eyes) with enough force to injure you if you
air bag moves at a very high speed and with such a high are not belted and seated properly, or if items are
force that it could injure you if you are not seated positioned in the area where the side curtain air bag
properly, or if items are positioned in the area where the inflates. This especially applies to children. The side
side air bag inflates. This especially applies to children. curtain air bag is only about 3-1/2 in (9 cm) thick when
it is inflated.
Supplemental Side Air Bag Inflatable Curtain
(SABIC) Inflator Units Because air bag sensors estimate deceleration over time,
During collisions where the impact is confined to a vehicle speed and damage are not good indicators of
particular area of the side of the vehicle, the ORC may whether or not an air bag should have deployed.
deploy the SABIC air bags, depending on several factors,
NOTE: In a rollover the pretensioners and/or SAB and
including the severity and type of collision. In these
SABIC air bags may deploy on both sides of the vehicle.
events, the ORC will deploy the SABIC only on the
impact side of the vehicle.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71
Front And Side Impact Sensors • Unlock the doors automatically.
In front and side impacts, impact sensors can aid the
In order to reset the Enhanced Accident Response System
ORC in determining appropriate response to impact
functions after an event, the ignition switch must be
events. 2
changed from IGN ON to IGN OFF.
Enhanced Accident Response System
If A Deployment Occurs
In the event of an impact causing air bag deployment, if
The Advanced Front Air Bags are designed to deflate
the communication network remains intact, and the
immediately after deployment.
power remains intact, depending on the nature of the
event the ORC will determine whether to have the NOTE: Front and/or side air bags will not deploy in all
Enhanced Accident Response System perform the follow- collisions. This does not mean something is wrong with
ing functions: the air bag system.
• Cut off fuel to the engine. If you do have a collision, which deploys the air bags, any
or all of the following may occur:
• Flash hazard lights as long as the battery has power or
until the ignition key is turned off. • The nylon air bag material may sometimes cause
abrasions and/or skin reddening to the driver and
• Turn on the interior lights, which remain on as long as
front passenger as the air bags deploy and unfold. The
the battery has power or until the ignition key is
abrasions are similar to friction rope burns or those
removed.
you might get sliding along a carpet or gymnasium
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
floor. They are not caused by contact with chemicals. Do not drive your vehicle after the air bags have de-
They are not permanent and normally heal quickly. ployed. If you are involved in another collision, the air
However, if you haven’t healed significantly within a bags will not be in place to protect you.
few days, or if you have any blistering, see your doctor
immediately. WARNING!
• As the air bags deflate, you may see some smoke-like Deployed air bags and seat belt pretensioners cannot
particles. The particles are a normal by-product of the protect you in another collision. Have the air bags,
process that generates the non-toxic gas used for air seat belt pretensioners, and the front seat belt retrac-
bag inflation. These airborne particles may irritate the tor assemblies replaced by an authorized dealer im-
skin, eyes, nose, or throat. If you have skin or eye mediately. Also, have the Occupant Restraint Con-
irritation, rinse the area with cool water. For nose or troller System serviced as well.
throat irritation, move to fresh air. If the irritation
continues, see your doctor. If these particles settle on
your clothing, follow the garment manufacturer’s in-
structions for cleaning.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73
Maintaining Your Air Bag System
WARNING! (Continued)
WARNING! • Do not attempt to modify any part of your air bag
system. The air bag may inflate accidentally or
• Modifications to any part of the air bag system may not function properly if modifications are 2
could cause it to fail when you need it. You could made. Take your vehicle to an authorized dealer
be injured if the air bag system is not there to for any air bag system service. If your seat includ-
protect you. Do not modify the components or ing your trim cover and cushion needs to be
wiring, including adding any kind of badges or serviced in any way (including removal or
stickers to the steering wheel hub trim cover or the loosening/tightening of seat attachment bolts),
upper right side of the instrument panel. Do not take the vehicle to your authorized dealer. Only
modify the front bumper, vehicle body structure, manufacturer approved seat accessories may be
or add aftermarket side steps or running boards. used. If it is necessary to modify the air bag system
• It is dangerous to try to repair any part of the air for persons with disabilities, contact your autho-
bag system yourself. Be sure to tell anyone who rized dealer.
works on your vehicle that it has an air bag system.
(Continued)
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Air Bag Warning Light NOTE: If the speedometer, tachometer, or any engine
You will want to have the air bags ready to related gauges are not working, the Occupant Restraint
inflate for your protection in a collision. The Controller (ORC) may also be disabled. The air bags may
Air Bag Warning Light monitors the internal not be ready to inflate for your protection. Promptly
circuits and interconnecting wiring associated check the fuse block for blown fuses. Refer to the label
with air bag system electrical components. While the air located on the inside of the fuse block cover for the
bag system is designed to be maintenance free, if any of proper air bag fuses. See your authorized dealer if the
the following occurs, have an authorized dealer service fuse is good.
the air bag system immediately. Event Data Recorder (EDR)
• The Air Bag Warning Light does not come on during This vehicle is equipped with an event data recorder
the four to eight seconds when the ignition switch is (EDR). The main purpose of an EDR is to record, in
first turned on. certain crash or near crash-like situations, such as an air
bag deployment or hitting a road obstacle, data that will
• The Air Bag Warning Light remains on after the four to
assist in understanding how a vehicle’s systems per-
eight second interval.
formed. The EDR is designed to record data related to
• The Air Bag Warning Light comes on intermittently or vehicle dynamics and safety systems for a short period of
remains on while driving. time, typically 30 seconds or less. The EDR in this vehicle
is designed to record such data as:
• How various systems in your vehicle were operating;
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75
• Whether or not the driver and passenger safety belts To read data recorded by an EDR, special equipment is
were buckled/fastened; required, and access to the vehicle or the EDR is needed.
In addition to the vehicle manufacturer, other parties,
• How far (if at all) the driver was depressing the
such as law enforcement, that have the special equip- 2
accelerator and/or brake pedal; and,
ment, can read the information if they have access to the
• How fast the vehicle was traveling. vehicle or the EDR.
These data can help provide a better understanding of Child Restraints
the circumstances in which crashes and injuries occur. Everyone in your vehicle needs to be buckled up at all
times, including babies and children. Every state in the
NOTE: EDR data are recorded by your vehicle only if a
United States and all Canadian provinces require that
non-trivial crash situation occurs; no data are recorded by
small children ride in proper restraint systems. This is the
the EDR under normal driving conditions and no per-
law, and you can be prosecuted for ignoring it.
sonal data (e.g., name, gender, age, and crash location)
are recorded. However, other parties, such as law en- Children 12 years or younger should ride properly
forcement, could combine the EDR data with the type of buckled up in a rear seat, if available. According to crash
personally identifying data routinely acquired during a statistics, children are safer when properly restrained in
crash investigation. the rear seats, rather than in the front.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
The infant carrier is only used rearward-facing in the
WARNING!
vehicle. It is recommended for children from birth until
In a collision, an unrestrained child, even a tiny baby, they reach the weight or height limit of the infant carrier.
can become a projectile inside the vehicle. The force Convertible child seats can be used either rearward-
required to hold even an infant on your lap could facing or forward-facing in the vehicle. Convertible child
become so great that you could not hold the child, no seats often have a higher weight limit in the rearward-
matter how strong you are. The child and others facing direction than infant carriers do, so they can be
could be badly injured. Any child riding in your used rearward-facing by children who have outgrown
vehicle should be in a proper restraint for the child’s their infant carrier but are still less than at least two years
size. old. Children should remain rearward-facing until they
reach the highest weight or height allowed by their
Infants And Child Restraints convertible child seat. Both types of child restraints are
Safety experts recommend that children ride rearward- held in the vehicle by the lap/shoulder belt or the
facing in the vehicle until they are two years old or until LATCH child restraint anchor system. Refer to “Lower
they reach either the height or weight limit of their rear Anchors and Tether for CHildren (LATCH)”.
facing child safety seat. Two types of child restraints can
be used rearward-facing: infant carriers and convertible
child seats.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77
in the vehicle by the lap/shoulder belt or the LATCH
WARNING!
child restraint anchorage system. Refer to “Lower An-
Rearward-facing child seats must never be used in chors and Tether for CHildren (LATCH)”.
the front seat of a vehicle with the front passenger air 2
All children whose weight or height is above the
bag. An air bag deployment could cause severe
forward-facing limit for the child seat should use a
injury or death to infants in this position.
belt-positioning booster seat until the vehicle’s seat belts
fit properly. If the child cannot sit with knees bent over
Older Children And Child Restraints
the vehicle’s seat cushion while the child’s back is against
Children who are two years old or who have outgrown
the seatback, they should use a belt-positioning booster
their rear-facing convertible child seat can ride forward-
seat. The child and belt-positioning booster seat are held
facing in the vehicle. Forward-facing child seats and
in the vehicle by the lap/shoulder belt.
convertible child seats used in the forward-facing direc-
tion are for children who are over two years old or who NOTE: For additional information, refer to
have outgrown the rear-facing weight or height limit of www.seatcheck.org or call 1–866–SEATCHECK. Cana-
their rear-facing convertible child seat. Children should dian residents should refer to Transport Canada’s web-
remain in a forward-facing child seat with a harness for site for additional information: http://www.tc.gc.ca/
as long as possible, up to the highest weight or height roadsafety/safedrivers/childsafety/index.htm
allowed by the child seat. These child seats are also held
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
you make sure that you can install the child restraint in
WARNING!
the vehicle where you will use it, before you buy it.
• Improper installation can lead to failure of an
• The restraint must be appropriate for your child’s
infant or child restraint. It could come loose in a
weight and height. Check the label on the restraint for
collision. The child could be badly injured or
weight and height limits.
killed. Follow the manufacturer’s directions ex-
actly when installing an infant or child restraint. • Carefully follow the instructions that come with the
• A rearward-facing child restraint should only be restraint. If you install the restraint improperly, it may
used in a rear seat. A rearward-facing child re- not work when you need it.
straint in the front seat may be struck by a deploy- Installing Child Restraints Using The Vehicle Seat
ing passenger air bag which may cause severe or Belt
fatal injury to the infant. The seat belts in the passenger seating positions are
equipped with an Automatic Locking Retractor (ALR) to
Here are some tips on getting the most out of your child secure a Child Restraint System (CRS). These types of
restraint: seat belts are designed to keep the lap portion of the seat
• Before buying any restraint system, make sure that it belt tight around the child restraint so that it is not
has a label certifying that it meets all applicable Safety necessary to use a locking clip. The ALR will make a
Standards. Chrysler Group LLC also recommends that ratcheting noise if you extract the entire belt from the
retractor and then allow the belt to retract into the
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79
retractor. For additional information on ALR, refer to retracts, you will hear a ratcheting sound. This indicates
“Automatic Locking Mode”. The chart below defines the the safety belt is now in the Automatic Locking mode.
seating positions with an Automatic Locking Retractor
2. Finally, pull on any excess webbing to tighten the lap
(ALR) or a cinching latch plate. 2
portion around the child restraint. Any seat belt system
Driver Center Passenger will loosen with time, so check the belt occasionally, and
CRS Lock CRS Lock CRS Lock pull it tight if necessary.
First Row N/A N/A ALR
• In the rear seat, you may have trouble tightening the
Second Row ALR ALR ALR lap/shoulder belt on the child restraint because the
• N/A — Not Applicable buckle or latch plate is too close to the belt path
opening on the restraint. Disconnect the latch plate
• ALR — Automatic Locking Retractor
from the buckle and twist the short buckle end of the
Installing a Child Restraint with an ALR: belt several times to shorten it. Insert the latch plate
into the buckle with the release button facing out.
1. To install a child restraint with ALR, first, pull enough
of the seat belt webbing from the retractor to route it • If the belt still can’t be tightened, or if pulling and
through the belt path of the child restraint. Slide the latch pushing on the restraint loosens the belt, disconnect
plate into the buckle until you hear a “click.” Next, the latch plate from the buckle, turn the latch plate
extract all the seat belt webbing out of the retractor and
then allow the belt to retract into the retractor. As the belt
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
around, and insert the latch plate into the buckle • Make sure that the child is upright in the seat.
again. If you still can’t make the child restraint secure,
• The lap portion should be low on the hips and as snug
try a different seating position.
as possible.
• Buckle the child into the seat according to the child
• Check belt fit periodically. A child’s squirming or
restraint manufacturer’s directions.
slouching can move the belt out of position.
WARNING! • If the shoulder belt contacts the face or neck, move the
child closer to the center of the vehicle. Never allow a
When your child restraint is not in use, secure it in
child to put the shoulder belt under an arm or behind
the vehicle with the seat belt or remove it from the
their back.
vehicle. Do not leave it loose in the vehicle. In a
sudden stop or accident, it could strike the occupants Lower Anchors and Tether for CHildren (LATCH)
or seatbacks and cause serious personal injury. Your vehicle is equipped with the child restraint anchor-
age system called LATCH, which stands for Lower
Children Too Large For Booster Seats Anchors and Tether for CHildren. The LATCH system
Children who are large enough to wear the shoulder belt provides for the installation of the child restraint without
comfortably and whose legs are long enough to bend using the vehicle seat belt. All three rear seating positions
over the front of the seat when their back is against the have lower anchorages that are capable of accommodat-
seatback should use the lap/shoulder belt in a rear seat. ing LATCH-compatible child seats having flexible,
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81
webbing-mounted lower attachments. Child seats with
fixed lower attachments must be installed in the out-
board positions only. Regardless of the specific type of
lower attachment, never install LATCH-compatible child 2
seats such that two seats share a common lower anchor-
age. If you are installing LATCH-compatible child re-
straints in adjacent rear seating positions, you can use the
LATCH anchors or the vehicle’s seat belt for the outboard
position, but you must use the vehicle’s seat belt at the
center position. If your child restraints are not LATCH-
compatible, you can only install the child restraints using
the vehicle’s seat belts. Please refer to “Installing The
Child Restraint System” for typical installation instruc- Rear Seat LATCH
tions. Child restraints systems having attachments designed to
connect to the lower anchorages are now available. Child
restraints having tether straps and hooks for connection
to the top tether anchorage, have been available for some
time. In fact, many child restraint manufacturers will
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
provide add-on tether strap kits for some of their older restraint installation, instead of tucking the seat belt
products. Tether anchorage kits are also available for behind the child restraint, route the seat belt through the
most older vehicles. child restraint belt path and then buckle it. This should
stow the seat belt out of the reach of an inquisitive child.
Because the lower anchorages are to be introduced to
Remind all children in the vehicle that the seat belts are
passenger carrying vehicles over a period of years, child
not toys and should not be played with, and never leave
restraint systems having attachments for those anchor-
your child unattended in the vehicle.
ages will continue to have features for installation in
vehicles using the lap or lap/shoulder belt. They will also Installing The Child Restraint System
have tether straps, and you are urged to take advantage We urge you to carefully follow the directions of the
of all of the available attachments provided with your manufacturer when installing your child restraint. Many,
child restraint in any vehicle. but not all, restraint systems will be equipped with
separate straps on each side, with each having a hook or
NOTE: When using the LATCH attaching system to
connector, and a means for adjusting the tension in the
install a child restraint, please ensure that all seat belts
strap. Forward-facing toddler restraints and some
not being used for occupant restraints are stowed and out
rearward-facing infant restraints will also be equipped
of reach of children. It is recommended that before
with a tether strap with a hook and means for adjusting
installing the child restraint, buckle the seat belt so the
the tension in the strap.
seat belt is tucked behind the child restraint and out of
reach. If the buckled seat belt interferes with the child
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83
In general, you will first loosen the adjusters on the lower Not all child restraint systems will be installed as we
and tether straps so that you can attach the hook or have described here. Again, carefully follow the instruc-
connector to the lower and tether anchorages more easily. tions that come with the child restraint system.
The tether strap should be routed over the center of the 2
NOTE: If your child restraint seat is not LATCH-
head restraint and attached to the tether anchor on the rear
compatible, install the restraint using the vehicle seat
of the seatback. Then tighten all three straps as you push
belts.
the child restraint rearward and downward into the seat.
WARNING!
An incorrectly anchored tether strap could lead to
increased head motion and possible injury to the
child. Use only the anchor position directly behind
the child seat to secure a child restraint top tether
strap.

Rear Seat Tether Anchors

84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Transporting Pets The engine oil installed in the engine at the factory is a
Air Bags deploying in the front seat could harm your pet. high-quality energy conserving type lubricant. Oil
An unrestrained pet will be thrown about and possibly changes should be consistent with anticipated climate
injured, or injure a passenger during panic braking or in conditions under which vehicle operations will occur. For
a collision. the recommended viscosity and quality grades, refer to
“Maintenance Procedures” in “Maintaining Your Ve-
Pets should be restrained in the rear seat in pet harnesses
hicle”.
or pet carriers that are secured by seat belts.

ENGINE BREAK-IN RECOMMENDATIONS CAUTION!

A long break-in period is not required for the engine and Never use Non-Detergent Oil or Straight Mineral Oil
drivetrain (transmission and axle) in your vehicle. in the engine or damage may result.
Drive moderately during the first 300 miles (500 km).
After the initial 60 miles (100 km), speeds up to 50 or NOTE: A new engine may consume some oil during its
55 mph (80 or 90 km/h) are desirable. first few thousand miles (kilometers) of operation. This
should be considered a normal part of the break-in and
While cruising, brief full-throttle acceleration within the not interpreted as an indication of difficulty.
limits of local traffic laws contributes to a good break-in.
Wide-open throttle acceleration in low gear can be detri-
mental and should be avoided.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85
SAFETY TIPS Exhaust Gas
Transporting Passengers
WARNING!
NEVER TRANSPORT PASSENGERS IN THE CARGO
AREA. Exhaust gases can injure or kill. They contain carbon 2
monoxide (CO), which is colorless and odorless.
WARNING! Breathing it can make you unconscious and can
• Do not leave children or animals inside parked eventually poison you. To avoid breathing (CO),
vehicles in hot weather. Interior heat build-up may follow these safety tips:
cause serious injury or death. • Do not run the engine in a closed garage or in
• It is extremely dangerous to ride in a cargo area, confined areas any longer than needed to move
inside or outside of a vehicle. In a collision, people your vehicle in or out of the area.
riding in these areas are more likely to be seri- • If you are required to drive with the trunk/liftgate
ously injured or killed. open, make sure that all windows are closed and
• Do not allow people to ride in any area of your the climate control BLOWER switch is set at high
vehicle that is not equipped with seats and seat speed. DO NOT use the recirculation mode.
belts. (Continued)
• Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Safety Checks You Should Make Inside The
WARNING! (Continued)
Vehicle
• If it is necessary to sit in a parked vehicle with the
engine running, adjust your heating or cooling Seat Belts
controls to force outside air into the vehicle. Set Inspect the belt system periodically, checking for cuts,
the blower at high speed. frays, and loose parts. Damaged parts must be replaced
immediately. Do not disassemble or modify the system.
The best protection against carbon monoxide entry into
Front seat belt assemblies must be replaced after a
the vehicle body is a properly maintained engine exhaust
collision. Rear seat belt assemblies must be replaced after
system.
a collision if they have been damaged (i.e., bent retractor,
Whenever a change is noticed in the sound of the exhaust torn webbing, etc.). If there is any question regarding belt
system, when exhaust fumes can be detected inside the or retractor condition, replace the belt.
vehicle, or when the underside or rear of the vehicle is
damaged, have a competent mechanic inspect the com- Air Bag Warning Light
plete exhaust system and adjacent body areas for broken, The light should come on and remain on for four to eight
damaged, deteriorated, or mispositioned parts. Open seconds as a bulb check when the ignition switch is first
seams or loose connections could permit exhaust fumes turned ON. If the light is not lit during starting, see your
to seep into the passenger compartment. In addition, authorized dealer. If the light stays on, flickers, or comes
inspect the exhaust system each time the vehicle is raised on while driving, have the system checked by an autho-
for lubrication or oil change. Replace as required. rized dealer.
 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87
Defroster
WARNING! (Continued)
Check operation by selecting the defrost mode and place
the blower control on high speed. You should be able to • Always make sure that floor mats are properly
feel the air directed against the windshield. See your attached to the floor mat fasteners.
• Never place or install floor mats or other floor
2
authorized dealer for service if your defroster is
inoperable. coverings in the vehicle that cannot be properly
secured to prevent them from moving and inter-
Floor Mat Safety Information fering with the pedals or the ability to control the
Always use floor mats designed to fit the footwell of your vehicle.
vehicle. Use only floor mats that leave the pedal area • Never put floor mats or other floor coverings on
unobstructed and that are firmly secured so that they top of already installed floor mats. Additional
cannot slip out of position and interfere with the pedals floor mats and other coverings will reduce the size
or impair safe operation of your vehicle in other ways. of the pedal area and interfere with the pedals.
• Check mounting of mats on a regular basis. Al-
WARNING!
ways properly reinstall and secure floor mats that
Pedals that cannot move freely can cause loss of have been removed for cleaning.
vehicle control and increase the risk of serious per- (Continued)
sonal injury.
(Continued)
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
lodged in the tread or sidewall. Inspect the tread for cuts
WARNING! (Continued)
and cracks. Inspect sidewalls for cuts, cracks and bulges.
• Always make sure that objects cannot fall into the Check the wheel nuts for tightness. Check the tires
driver footwell while the vehicle is moving. Ob- (including spare) for proper cold inflation pressure.
jects can become trapped under the brake pedal
and accelerator pedal causing a loss of vehicle Lights
control. Have someone observe the operation of exterior lights
• If required, mounting posts must be properly while you work the controls. Check turn signal and high
installed, if not equipped from the factory. beam indicator lights on the instrument panel.
Failure to properly follow floor mat installation or Door Latches
mounting can cause interference with the brake Check for positive closing, latching, and locking.
pedal and accelerator pedal operation causing loss
of control of the vehicle. Fluid Leaks
Check area under vehicle after overnight parking for fuel,
Periodic Safety Checks You Should Make Outside engine coolant, oil, or other fluid leaks. Also, if gasoline
The Vehicle fumes are detected or if fuel, power steering fluid, or
brake fluid leaks are suspected, the cause should be
Tires located and corrected immediately.
Examine tires for excessive tread wear and uneven wear
patterns. Check for stones, nails, glass, or other objects
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

CONTENTS
3
䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 䡵 Uconnect™ Phone — If Equipped . . . . . . . . . . . 98
▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . 94 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . 100
▫ Automatic Dimming Mirror — If Equipped . . . 94 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . 107
▫ Outside Mirror — Driver Side . . . . . . . . . . . . 95 ▫ Uconnect™ Phone Features . . . . . . . . . . . . . 110
▫ Outside Mirror — Passenger Side . . . . . . . . . . 95 ▫ Advanced Phone Connectivity . . . . . . . . . . . 115
▫ Power Mirrors . . . . . . . . . . . . . . . . . . . . . . . 96 ▫ Things You Should Know About Your
Uconnect™ Phone . . . . . . . . . . . . . . . . . . . . 117
▫ Heated Mirrors — If Equipped . . . . . . . . . . . . 97
▫ General Information . . . . . . . . . . . . . . . . . . 128
▫ Vanity Mirrors — If Equipped . . . . . . . . . . . . 98
▫ Sun Visor Sliding Feature . . . . . . . . . . . . . . . 98
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
䡵 Voice Command — If Equipped . . . . . . . . . . . 128 ▫ Head Restraints . . . . . . . . . . . . . . . . . . . . . 141
▫ Voice Command System Operation . . . . . . . . 128 ▫ Folding Rear Seat . . . . . . . . . . . . . . . . . . . . 144
▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . 129 ▫ Reclining Rear Seat — If Equipped . . . . . . . . 145
▫ Voice Training . . . . . . . . . . . . . . . . . . . . . . 133 䡵 To Open And Close The Hood . . . . . . . . . . . . 146
䡵 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 䡵 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
▫ Power Seats — If Equipped . . . . . . . . . . . . . 134 ▫ Multifunction Lever . . . . . . . . . . . . . . . . . . 148
▫ Heated Seats — If Equipped . . . . . . . . . . . . 135 ▫ Headlights And Parking Lights . . . . . . . . . . 148
▫ Manual Front Seat Adjustment . . . . . . . . . . . 136 ▫ Daytime Running Lights — If Equipped . . . . 149
▫ Manual Seat Height Adjustment — If ▫ Lights-On Reminder . . . . . . . . . . . . . . . . . . 149
Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 138
▫ Fog Lights — If Equipped . . . . . . . . . . . . . . 149
▫ Manual Lumbar — If Equipped . . . . . . . . . . 138
▫ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . 150
▫ Driver’s Seatback Recline . . . . . . . . . . . . . . . 139
▫ High/Low Beam Switch . . . . . . . . . . . . . . . 150
▫ Fold-Flat Front Passenger Seat . . . . . . . . . . . 140
▫ Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . 150
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91
▫ Instrument Panel Dimming . . . . . . . . . . . . . 151 ▫ To Vary The Speed Setting . . . . . . . . . . . . . . 159
▫ Map/Reading Lights . . . . . . . . . . . . . . . . . . 152 ▫ To Accelerate For Passing . . . . . . . . . . . . . . 160
䡵 Windshield Wipers And Washers . . . . . . . . . . 152 䡵 Garage Door Opener — If Equipped . . . . . . . . 160
▫ Windshield Wiper Operation . . . . . . . . . . . . 154 ▫ Before You Begin Programming
HomeLink威 . . . . . . . . . . . . . . . . . . . . . . . . 162 3
▫ Intermittent Wiper System . . . . . . . . . . . . . . 154
▫ Programming A Rolling Code . . . . . . . . . . . 162
▫ Windshield Washers . . . . . . . . . . . . . . . . . . 155
▫ Programming A Non-Rolling Code . . . . . . . . 164
▫ Mist Feature . . . . . . . . . . . . . . . . . . . . . . . . 155
▫ Canadian/Gate Operator Programming . . . . 165
䡵 Tilt Steering Column . . . . . . . . . . . . . . . . . . . 156
▫ Using HomeLink威 . . . . . . . . . . . . . . . . . . . 167
䡵 Electronic Speed Control — If Equipped . . . . . 157
▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
▫ To Activate . . . . . . . . . . . . . . . . . . . . . . . . . 158
▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . 168
▫ To Set A Desired Speed . . . . . . . . . . . . . . . . 159
▫ General Information . . . . . . . . . . . . . . . . . . 169
▫ To Deactivate . . . . . . . . . . . . . . . . . . . . . . . 159
▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . 159
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
䡵 Power Sunroof — If Equipped . . . . . . . . . . . . 169 䡵 Cupholders . . . . . . . . . . . . . . . . . . . . . . . . . . 178
▫ Opening Sunroof — Express . . . . . . . . . . . . 170 䡵 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
▫ Opening Sunroof — Manual Mode . . . . . . . . 170 ▫ Glove Compartment And Storage Bin . . . . . . 179
▫ Closing Sunroof — Express . . . . . . . . . . . . . 171 ▫ Door Storage . . . . . . . . . . . . . . . . . . . . . . . 180
▫ Closing Sunroof — Manual Mode . . . . . . . . 171 䡵 Console Features . . . . . . . . . . . . . . . . . . . . . . 181
▫ Pinch Protect Feature . . . . . . . . . . . . . . . . . 171 䡵 Cargo Area Features . . . . . . . . . . . . . . . . . . . 182
▫ Venting Sunroof — Express . . . . . . . . . . . . . 171 ▫ Cargo Light/Removable Self-Recharging
Flashlight . . . . . . . . . . . . . . . . . . . . . . . . . . 182
▫ Sunshade Operation . . . . . . . . . . . . . . . . . . 172
▫ Cargo Cover . . . . . . . . . . . . . . . . . . . . . . . . 183
▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . 172
▫ Removable Load Floor . . . . . . . . . . . . . . . . 185
▫ Sunroof Maintenance . . . . . . . . . . . . . . . . . 172
▫ Cargo Tie-Down Loops . . . . . . . . . . . . . . . . 185
▫ Ignition Off Operation . . . . . . . . . . . . . . . . . 172
▫ Fold Down Speakers — If Equipped . . . . . . . 187
䡵 Electrical Power Outlets . . . . . . . . . . . . . . . . . 173
䡵 Power Inverter — If Equipped . . . . . . . . . . . . 176
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93
䡵 Rear Window Features . . . . . . . . . . . . . . . . . . 187 ▫ Rear Window Defroster . . . . . . . . . . . . . . . . 188
▫ Rear Window Wiper/Washer . . . . . . . . . . . . 187 䡵 Roof Luggage Rack — If Equipped . . . . . . . . . 189

3
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
MIRRORS
Inside Day/Night Mirror
A two-point pivot system allows for horizontal and
vertical mirror adjustment. Adjust the mirror to center on
the view through the rear window.
Headlight glare can be reduced by moving the small
control under the mirror to the night position (toward the
rear of vehicle). The mirror should be adjusted while set
in the day position (toward the windshield).

Adjusting Rearview Mirror

Automatic Dimming Mirror — If Equipped
This mirror automatically adjusts for headlight glare
from vehicles behind you. You can turn the feature on or
off by pressing the button at the base of the mirror. A light
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95
to the left of the button will illuminate to indicate when
CAUTION!
the dimming feature is activated. The sensor to the right
of the button does not illuminate. To avoid damage to the mirror during cleaning, never
spray any cleaning solution directly onto the mirror.
NOTE: This feature is disabled when the vehicle is
Apply the solution onto a clean cloth and wipe the
moving in reverse.
mirror clean. 3
Outside Mirror — Driver Side
Adjust the flat outside mirror so you can just see the side
of your vehicle in the part of the mirror closest to the
vehicle with your head close to the door glass.
Outside Mirror — Passenger Side
Adjust the convex outside mirror so you can just see the
side of your vehicle in the part of the mirror closest to the
vehicle with your head close to the center of the vehicle.

Automatic Dimming Mirror

96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WARNING!
Vehicles and other objects seen in the passenger side
convex mirror will look smaller and farther away
than they really are. Relying too much on your
passenger side mirror could cause you to collide with
another vehicle or other object. Use your inside
mirror when judging the size or distance of a vehicle
seen in this convex mirror.

Power Mirrors
The power mirror controls are located on the driver’s
door trim panel. Power Mirror Control
To adjust a mirror, turn the control wand toward the left
or right mirror positions indicated. Tilt the control wand
in the direction you want the mirror to move.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97

WARNING!
Vehicles and other objects seen in the passenger side
convex mirror will look smaller and farther away
than they really are. Relying too much on your
passenger side mirror could cause you to collide with 3
another vehicle or other object. Use your inside
mirror when judging the size or distance of a vehicle
seen in this convex mirror.

Heated Mirrors — If Equipped

These mirrors are heated to melt frost or ice. This
Mirror Directions feature is activated whenever you turn on the rear
When you are finished adjusting the mirror, turn the window defroster. Refer to “Rear Window Features” in
control to the center position to prevent accidentally “Understanding the Features of Your Vehicle” for further
moving a mirror. information.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Vanity Mirrors — If Equipped Uconnect™ Phone — IF EQUIPPED
To use the vanity mirror, rotate the sun visor down and Uconnect™ Phone is a voice-activated, hands-free, in-
swing the mirror cover upward. vehicle communications system. Uconnect™ Phone al-
lows you to dial a phone number with your mobile
phone using simple voice commands (e.g., “Call” ѧ
“Mike” ѧ “Work” or “Dial” ѧ “248-555-1212”). Your
mobile phone’s audio is transmitted through your vehi-
cle’s audio system; the system will automatically mute
your radio when using the Uconnect™ Phone.
NOTE: The Uconnect™ Phone requires a mobile phone
equipped with the Bluetooth威 “Hands-Free Profile”, Ver-
sion 0.96 or higher. See the Uconnect™ website for
supported phones.
For Uconnect™ customer support, visit the following
Vanity Mirror websites:
Sun Visor Sliding Feature • www.chrysler.com/uconnect
The sun visors may be extended out to provide more
coverage of the side glass. • www.dodge.com/uconnect
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99
• www.jeep.com/uconnect system. Only one linked (or paired) mobile phone can be
used with the system at a time. The system is available in
• or call 1–877–855–8400
English, Spanish, or French languages.
Uconnect™ Phone allows you to transfer calls between
the system and your mobile phone as you enter or exit WARNING!
your vehicle and enables you to mute the system’s 3
Any voice commanded system should be used only
microphone for private conversation.
in safe driving conditions following local laws and
The Uconnect™ Phone is driven through your phone use. All attention should be kept on the
Bluetooth威 “Hands-Free Profile” mobile phone. roadway ahead. Failure to do so may result in a
Uconnect™ features Bluetooth威 technology - the global collision causing serious injury or death.
standard that enables different electronic devices to con-
nect to each other without wires or a docking station, so Uconnect™ Phone Button
Uconnect™ Phone works no matter where you stow your The radio or steering wheel controls (if
mobile phone (be it your purse, pocket, or briefcase), as equipped) will contain the two control buttons
long as your phone is turned on and has been paired to (Uconnect™ Phone button and Voice Com-
the vehicle’s Uconnect™ Phone. The Uconnect™ Phone mand button) that will enable you to
allows up to seven mobile phones to be linked to the access the system. When you press the button you will
hear the word Uconnect™ followed by a BEEP. The beep
is your signal to give a command.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Voice Command Button Operation
Actual button location may vary with the ra- Voice commands can be used to operate the Uconnect™
Phone and to navigate through the Uconnect™ Phone
dio. The individual buttons are described in the
“Operation” section. menu structure. Voice commands are required after most
Uconnect™ Phone prompts. You will be prompted for a
The Uconnect™ Phone can be used with any Hands-Free specific command and then guided through the available
Profile certified Bluetooth威 mobile phone. See the options.
Uconnect™ website for supported phones. Refer to your
• Prior to giving a voice command, one must wait for
mobile service provider or the phone manufacturer for
the beep, which follows the “Ready” prompt or an-
details.
other prompt.
The Uconnect™ Phone is fully integrated with the vehi-
• For certain operations, compound commands can be
cle’s audio system. The volume of the Uconnect™ Phone
used. For example, instead of saying “Setup” and then
can be adjusted either from the radio volume control
“Pair a Device”, the following compound command
knob or from the steering wheel radio control (right
can be said: “Pair a Bluetooth威 Device”.
switch), if so equipped.
• For each feature explanation in this section, only the
The radio display will be used for visual prompts from
compound form of the voice command is given. You
the Uconnect™ Phone such as “CELL” or caller ID on
can also break the commands into parts and say each
certain radios.
part of the command when you are asked for it. For
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101
example, you can use the compound form voice Cancel Command
command “Phonebook New Entry”, or you can break At any prompt, after the beep, you can say “Cancel” and
the compound form command into two voice com- you will be returned to the main menu. However, in a
mands: “Phonebook” and “New Entry”. Please re- few instances the system will take you back to the
member, the Uconnect™ Phone works best when you previous menu.
talk in a normal conversational tone, as if speaking to 3
Pair (Link) Uconnect™ Phone To A Mobile Phone
someone sitting a few feet/meters away from you.
To begin using your Uconnect™ Phone, you must pair
Voice Command Tree your compatible Bluetooth威 enabled mobile phone.
Refer to “Voice Tree” in this section.
To complete the pairing process, you will need to refer-
Help Command ence your mobile phone Owner’s Manual. The
If you need assistance at any prompt, or if you want to Uconnect™ website may also provide detailed instruc-
know your options at any prompt, say “Help” following tions for pairing.
the beep. The Uconnect™ Phone will play some of the
The following are general phone to Uconnect™ Phone
options at any prompt if you ask for help.
pairing instructions:
To activate the Uconnect™ Phone, simply press the
• Press the button to begin.
button and follow the audible prompts for directions.
Uconnect™ Phone sessions begin with a press of the • After the “Ready” prompt and the following beep, say
button on the radio control head. “Device Pairing”.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
• When prompted, after the beep, say “Pair a Device” phone to use if multiple mobile phones are in the
and follow the audible prompts. vehicle at the same time. For example, if priority three
and priority five phones are present in the vehicle, the
• You will be asked to say a four-digit Personal Identi-
Uconnect™ Phone will use the priority three mobile
fication Number (PIN), which you will later need to
phone when you make a call. You can select to use a
enter into your mobile phone. You can enter any
lower priority mobile phone at any time (refer to
four-digit PIN. You will not need to remember this PIN
“Advanced Phone Connectivity” in this section).
after the initial pairing process.
Dial By Saying A Number
• For identification purposes, you will be prompted to
give the Uconnect™ Phone a name for your mobile • Press the button to begin.
phone. Each mobile phone that is paired should be
• After the “Ready” prompt and the following beep, say
given a unique phone name.
“Dial”.
• You will then be asked to give your mobile phone a
• The system will prompt you to say the number you
priority level between one and seven, with one being
want to call.
the highest priority. You can pair up to seven mobile
phones to your Uconnect™ Phone. However, at any • For example, you can say “234-567-8901”.
given time, only one mobile phone can be in use,
connected to your Uconnect™ System. The priority
allows the Uconnect™ Phone to know which mobile
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103
• The Uconnect™ Phone will confirm the phone number • The Uconnect™ system will confirm the name and
and then dial. The number will appear in the display then dial the corresponding phone number, which
of certain radios. may appear in the display of certain radios.
Call By Saying A Name Add Names To Your Uconnect™ Phonebook
• Press the button to begin. NOTE: Adding names to the Uconnect™ Phonebook is 3
recommended when the vehicle is not in motion.
• After the “Ready” prompt and the following beep, say
“Call”. • Press the button to begin.
• The system will prompt you to say the name of the • After the “Ready” prompt and the following beep, say
person you want to call. “Phonebook New Entry”.
• After the “Ready” prompt and the following beep, say • When prompted, say the name of the new entry. Use of
the name of the person you want to call. For example, long names helps the Voice Command and it is recom-
you can say “John Doe”, where John Doe is a previ- mended. For example, say “Robert Smith” or “Robert”
ously stored name entry in the Uconnect™ phonebook instead of “Bob”.
or downloaded phonebook. To learn how to store a
name in the phonebook, refer to “Add Names to Your
Uconnect™ Phonebook”, in the phonebook.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
• When prompted, enter the number designation (e.g., Phonebook Download – Automatic Phonebook
“Home”, “Work”, “Mobile”, or “Other”). This will Transfer From Mobile Phone
allow you to store multiple numbers for each phone- If equipped and specifically supported by your phone,
book entry, if desired. Uconnect™ Phone automatically downloads names (text
names) and number entries from your mobile phone’s
• When prompted, recite the phone number for the
phonebook. Specific Bluetooth威 Phones with Phone Book
phonebook entry that you are adding.
Access Profile may support this feature. See Uconnect™
After you are finished adding an entry into the phone- website for supported phones.
book, you will be given the opportunity to add more
• To call a name from the Uconnect™ Phonebook or
phone numbers to the current entry or to return to the
downloaded Phonebook, follow the procedure in
main menu.
“Call by Saying a Name” section.
The Uconnect™ Phone will allow you to enter up to 32
• Automatic download and update, if supported, begins
names in the phonebook with each name having up to
as soon as the Bluetooth威 wireless phone connection is
four associated phone numbers and designations. Each
made to the Uconnect™ Phone, for example, after you
language has a separate 32-name phonebook accessible
start the vehicle.
only in that language. In addition, if equipped and
supported by your phone, Uconnect™ Phone automati- • A maximum of 1000 entries per phone will be down-
cally downloads your mobile phone’s phonebook. loaded and updated every time a phone is connected
to the Uconnect™ Phone.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105
• Depending on the maximum number of entries down- Edit Uconnect™ Phonebook Entries
loaded, there may be a short delay before the latest
NOTE:
downloaded names can be used. Until then, if avail-
• Editing names in the phonebook is recommended
able, the previously downloaded phonebook is avail-
when the vehicle is not in motion.
able for use.
• Automatic downloaded phonebook entries cannot be 3
• Only the phonebook of the currently connected mobile
deleted or edited.
phone is accessible.
• Press the button to begin.
• Only the mobile phone’s phonebook is downloaded.
SIM card phonebook is not part of the Mobile phone- • After the “Ready” prompt and the following beep, say
book. “Phonebook Edit Entry”.
• This downloaded phonebook cannot be edited or • You will then be asked for the name of the phonebook
deleted on the Uconnect™ Phone. These can only be entry that you wish to edit.
edited on the mobile phone. The changes are trans-
• Next, choose the number designation (home, work,
ferred and updated to Uconnect™ Phone on the next
mobile, or other) that you wish to edit.
phone connection.
• When prompted, recite the new phone number for the
phonebook entry that you are editing.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
After you are finished editing an entry in the phonebook, • After you enter the Phonebook Delete menu, you will
you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish
the phonebook, call the number you just edited, or return to delete. You can either say the name of a phonebook
to the main menu. entry that you wish to delete or you can say “List
Names” to hear a list of the entries in the phonebook
“Phonebook Edit Entry” can be used to add another
from which you choose. To select one of the entries
phone number to a name entry that already exists in the
from the list, press the button while the
phonebook. For example, the entry John Doe may have a
Uconnect™ Phone is playing the desired entry and say
mobile and a home number, but you can add “John
“Delete”.
Doe’s” work number later using the “Phonebook Edit
Entry” feature. • After you enter the name, the Uconnect™ Phone will
ask you which designation you wish to delete: home,
Delete Uconnect™ Phonebook Entry
work, mobile, other, or all. Say the designation you
NOTE: Editing phonebook entries is recommended wish to delete.
when the vehicle is not in motion.
• Note that only the phonebook entry in the current
• Press the button to begin. language is deleted.
• After the “Ready” prompt and the following beep, say • Automatic downloaded phonebook entries cannot be
“Phonebook Delete”. deleted or edited.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107
Delete/Erase “All” Uconnect™ Phonebook Entries • After the “Ready” prompt and the following beep, say
“Phonebook List Names”.
• Press the button to begin.
• The Uconnect™ Phone will play the names of all the
• After the “Ready” prompt and the following beep, say
phonebook entries, including the downloaded phone-
“Phonebook Erase All”.
book entries, if available.
• The Uconnect™ Phone will ask you to verify that you 3
• To call one of the names in the list, press the
wish to delete all the entries from the phonebook.
button during the playing of the desired name, and
• After confirmation, the phonebook entries will be say “Call”.
deleted.
NOTE: The user can also exercise “Edit” or “Delete”
• Note that only the phonebook in the current language operations at this point.
is deleted.
• The Uconnect™ Phone will then prompt you as to the
• Automatic downloaded phonebook entries cannot be number designation you wish to call.
deleted or edited.
• The selected number will be dialed.
List All Names In The Uconnect™ Phonebook
Phone Call Features
• Press the button to begin. The following features can be accessed through the
Uconnect™ Phone if the feature(s) are available on your
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
mobile service plan. For example, if your mobile service mobile phone. Press the button to place the current
plan provides three-way calling, this feature can be call on hold and answer the incoming call.
accessed through the Uconnect™ Phone. Check with
NOTE: The Uconnect™ Phone compatible phones in the
your mobile service provider for the features that you
market today do not support rejecting an incoming call
have.
when another call is in progress. Therefore, the user can
Answer Or Reject An Incoming Call — No Call only answer an incoming call or ignore it.
Currently In Progress
Making A Second Call While Current Call Is In
When you receive a call on your mobile phone, the
Progress
Uconnect™ Phone will interrupt the vehicle audio sys-
To make a second call while you are currently on a call,
tem, if on, and will ask if you would like to answer the
press the button and say “Dial” or “Call” followed
call. Press the button to accept the call. To reject the
by the phone number or phonebook entry you wish to
call, press and hold the button until you hear a single
call. The first call will be on hold while the second call is
beep, indicating that the incoming call was rejected.
in progress. To go back to the first call, refer to “Toggling
Answer Or Reject An Incoming Call — Call Between Calls” in this section. To combine two calls, refer
Currently In Progress to “Conference Call” in this section.
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109
Place/Retrieve A Call From Hold Three-Way Calling
To put a call on hold, press the button until you hear To initiate three-way calling, press the button while
a single beep. This indicates that the call is on hold. To a call is in progress, and make a second phone call, as
bring the call back from hold, press and hold the described under “Making a Second Call While Current
button until you hear a single beep. Call is in Progress”. After the second call has established,
press and hold the button until you hear a double 3
Toggling Between Calls
beep, indicating that the two calls have been joined into
If two calls are in progress (one active and one on hold),
one conference call.
press the button until you hear a single beep,
indicating that the active and hold status of the two calls Call Termination
have switched. Only one call can be placed on hold at a To end a call in progress, momentarily press the
time. button. Only the active call(s) will be terminated and if
there is a call on hold, it will become the new active call.
Conference Call
If the active call is terminated by the phone far end, a call
When two calls are in progress (one active and one on
on hold may not become active automatically. This is cell
hold), press and hold the button until you hear a
phone-dependent. To bring the call back from hold, press
double beep indicating that the two calls have been
and hold the button until you hear a single beep.
joined into one conference call.
Redial
• Press the button to begin.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
• After the “Ready” prompt and the following beep, say • After the ignition key is switched to OFF, a call can
“Redial”. continue on the Uconnect™ Phone for a certain dura-
tion, after which the call is automatically transferred
• The Uconnect™ Phone will call the last number that
from the Uconnect™ Phone to the mobile phone.
was dialed from your mobile phone.
• An active call is automatically transferred to the
NOTE: This may not be the last number dialed from the
mobile phone after the ignition key is switched to OFF.
Uconnect™ Phone.
Uconnect™ Phone Features
Call Continuation
Call continuation is the progression of a phone call on the Language Selection
Uconnect™ Phone after the vehicle ignition key has been To change the language that the Uconnect™ Phone is
switched to OFF. Call continuation functionality avail- using:
able on the vehicle can be any one of three types:
• Press the button to begin.
• After the ignition key is switched to OFF, a call can
• After the “Ready” prompt and the following beep, say
continue on the Uconnect™ Phone either until the call
the name of the language you wish to switch to
ends, or until the vehicle battery condition dictates
English, Espanol, or Francais.
cessation of the call on the Uconnect™ Phone and
transfer of the call to the mobile phone. • Continue to follow the system prompts to complete
the language selection.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111
After selecting one of the languages, all prompts and • After the “Ready” prompt and the following beep, say
voice commands will be in that language. “Emergency” and the Uconnect™ Phone will instruct
the paired mobile phone to call the emergency num-
NOTE: After every Uconnect™ Phone language change
ber. This feature is supported in the U.S., Canada, and
operation, only the language-specific 32-name phone-
Mexico.
book is usable. The paired phone name is not language-
specific and is usable across all languages. NOTE: 3
• The emergency number dialed is based on the country
Emergency Assistance
where the vehicle is purchased (911 for the U.S. and
If you are in an emergency and the mobile phone is
Canada and 060 for Mexico). The number dialed may
reachable:
not be applicable with the available mobile service and
• Pick up the phone and manually dial the emergency area.
number for your area.
• If supported, this number may be programmable on
If the phone is not reachable and the Uconnect™ Phone is some systems. To do this, press the button and say
operational, you may reach the emergency number as “Setup”, followed by “Emergency”.
follows:
• The Uconnect™ Phone does slightly lower your
• Press the button to begin. chances of successfully making a phone call as to that
for the mobile phone directly.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Mexico City in Mexico). Please refer to the 24-Hour
WARNING!
“Towing Assistance” coverage details on the DVD in
To use your Uconnect™ Phone System in an emer- the Warranty Information Booklet and the 24-Hour
gency, your mobile phone must be: Towing Assistance references.
• turned on, • If supported, this number may be programmable on
• paired to the Uconnect™ System, some systems. To do this, press the button and say
• and have network coverage. “Setup”, followed by “Towing Assistance”.

Towing Assistance Paging

If you need towing assistance: To learn how to page, refer to “Working with Automated
Systems”. Paging works properly except for pagers of
• Press the button to begin. certain companies, which time out a little too soon to
• After the “Ready” prompt and the following beep, say work properly with the Uconnect™ Phone.
“Towing Assistance”. Voice Mail Calling
NOTE: To learn how to access your voice mail, refer to “Working
• The towing assistance number dialed is based on the with Automated Systems”.
country where the vehicle is purchased (1-800-528-
2069 for the U.S., 1-877-213-4525 for Canada, 55-14-
3454 for Mexico City and 1-800-712-3040 for outside
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113
Working With Automated Systems is also to be used for navigating through an automated
This method is used in instances where one generally has customer service center menu structure, and to leave a
to press numbers on the mobile phone keypad while number on a pager.
navigating through an automated telephone system.
You can also send stored Uconnect™ phonebook entries
You can use your Uconnect™ Phone to access a voice as tones for fast and easy access to voice mail and pager
mail system or an automated service, such as a paging entries. To use this feature, dial the number you wish to 3
service or automated customer service line. Some ser- call and then press the button and say, “Send.” The
vices require immediate response selection. In some system will prompt you to enter the name or number and
instances, that may be too quick for use of the say the name of the phonebook entry you wish to send.
Uconnect™ Phone. The Uconnect™ Phone will then send the corresponding
phone number associated with the phonebook entry, as
When calling a number with your Uconnect™ Phone that
tones over the phone.
normally requires you to enter in a touch-tone sequence
on your mobile phone keypad, you can press the NOTE:
button and say the sequence you wish to enter, followed • You may not hear all of the tones due to mobile phone
by the word “Send”. For example, if required to enter network configurations. This is normal.
your PIN followed with a pound, (3 7 4 6 #), you can
• Some paging and voice mail systems have system time
press the button and say, “3 7 4 6 # Send”. Saying
out settings that are too short and may not allow the
a number, or sequence of numbers, followed by “Send”,
use of this feature.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Barge In — Overriding Prompts Phone And Network Status Indicators
The “Voice Command” button can be used when you If available on the radio and/or on a premium display
wish to skip part of a prompt and issue your voice such as the instrument panel cluster, and supported by
command immediately. For example, if a prompt is your mobile phone, the Uconnect™ Phone will provide
asking “Would you like to pair a phone, clear a...,” you notification to inform you of your phone and network
could press the button and say, “Pair a Phone” to status when you are attempting to make a phone call
select that option without having to listen to the rest of using Uconnect™ Phone. The status is given for network
the voice prompt. signal strength, phone battery strength, etc.
Turning Confirmation Prompts ON/OFF Dialing Using The Mobile Phone Keypad
Turning confirmation prompts off will stop the system You can dial a phone number with your mobile phone
from confirming your choices (e.g., the Uconnect™ keypad and still use the Uconnect™ Phone (while dialing
Phone will not repeat a phone number before you dial it).
via the mobile phone keypad, the user must exercise
caution and take precautionary safety measures). By
• Press the button to begin.
dialing a number with your paired Bluetooth威 mobile
• After the “Ready” prompt and the following beep, say phone, the audio will be played through your vehicle’s
one of the following: audio system. The Uconnect™ Phone will work the same
as if you dial the number using Voice Command.
− “Setup Confirmation Prompts On”
− “Setup Confirmation Prompts Off”
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115
NOTE: Certain brands of mobile phones do not send the Advanced Phone Connectivity
dial ring to the Uconnect™ Phone to play it on the vehicle
Transfer Call To And From Mobile Phone
audio system, so you will not hear it. Under this situa-
The Uconnect™ Phone allows ongoing calls to be trans-
tion, after successfully dialing a number the user may feel
ferred from your mobile phone to the Uconnect™ Phone
that the call did not go through even though the call is in
without terminating the call. To transfer an ongoing call
progress. Once your call is answered, you will hear the 3
from your Uconnect™ Phone paired mobile phone to the
audio.
Uconnect™ Phone or vice versa, press the button
Mute/Un-Mute (Mute OFF) and say “Transfer Call”.
When you mute the Uconnect™ Phone, you will still be
Connect Or Disconnect Link Between The
able to hear the conversation coming from the other
Uconnect™ Phone And Mobile Phone
party, but the other party will not be able to hear you. In
Your mobile phone can be paired with many different
order to mute the Uconnect™ Phone:
electronic devices, but can only be actively “connected”
• Press the button. with one electronic device at a time.
• Following the beep, say “Mute”. If you would like to connect or disconnect the Bluetooth威
connection between your mobile phone and the
In order to un-mute the Uconnect™ Phone:
Uconnect™ Phone System, follow the instructions de-
• Press the button. scribed in your mobile phone User’s Manual.
• Following the beep, say “Mute off”.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
List Paired Mobile Phone Names • After the “Ready” prompt and the following beep, say
“Setup Select Phone” and follow the prompts.
• Press the button to begin.
• You can also press the button at any time while the
• After the “Ready” prompt and the following beep, say
list is being played, and then choose the phone that
“Setup Phone Pairing”.
you wish to select.
• When prompted, say “List Phones”.
• The selected phone will be used for the next phone
• The Uconnect™ Phone will play the phone names of call. If the selected phone is not available, the
all paired mobile phones in order from the highest to Uconnect™ Phone will return to using the highest
the lowest priority. To “Select” or “Delete” a paired priority phone present in or near (approximately
phone being announced, press the button and within 30 ft (9 m)) the vehicle.
say “Select” or “Delete”. Also, see the next two sec-
Delete Uconnect™ Phone Paired Mobile Phones
tions for an alternate way to “Select” or “Delete” a
paired phone. • Press the button to begin.
Select Another Mobile Phone • After the “Ready” prompt and the following beep, say
This feature allows you to select and start using another “Setup Phone Pairing”.
phone paired with the Uconnect™ Phone.
• At the next prompt, say “Delete” and follow the
• Press the button to begin. prompts.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117
• You can also press the button at any time while the • Press the button and say the “Voice Training,
list is being played, and then choose the phone you System Training, or Start Voice Training” command.
wish to delete.
You can either press the Uconnect™ Phone button to
Things You Should Know About Your Uconnect™ restore the factory setting or repeat the words and
Phone phrases when prompted by the Uconnect™ Phone. For
best results, the Voice Training session should be com- 3
Uconnect™ Phone Tutorial
pleted when the vehicle is parked with the engine
To hear a brief tutorial of the system features, press the
running, all windows closed, and the blower fan
button and say “Uconnect™ Tutorial.”
switched off.
Voice Training
This procedure may be repeated with a new user. The
For users experiencing difficulty with the system recogniz-
system will adapt to the last trained voice only.
ing their voice commands or numbers, the Uconnect™
Phone Voice Training feature may be used. To enter this Reset
training mode, follow one of the two following procedures:
• press the button.
From outside the Uconnect™ Phone mode (e.g., from
• After the “Ready” prompt, and the following beep, say
radio mode):
“Setup”, then “Reset”.
• Press and hold the button for five seconds until
the session begins, or,
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
This will delete all phone pairing, phone book entries, • low-to-medium vehicle speed,
and other settings in all language modes. The System will
• low road noise,
prompt you before resetting to factory settings.
• smooth road surface,
Voice Command
• fully closed windows,
• For best performance, adjust the rearview mirror to
provide at least 1⁄2 in (1 cm) gap between the overhead • dry weather condition.
console (if equipped) and the mirror.
• Even though the system is designed for users speaking
• Always wait for the beep before speaking. in North American English, French, and Spanish ac-
cents, the system may not always work for some.
• Speak normally, without pausing, just as you would
speak to a person sitting a few feet/meters away from • When navigating through an automated system such
you. as voice mail, or when sending a page, at the end of
speaking the digit string, make sure to say “Send”.
• Make sure that no one other than you is speaking
during a Voice Command period. • Storing names in the phonebook when the vehicle is
not in motion is recommended.
• Performance is maximized under:
• It is not recommended to store similar sounding
• low-to-medium blower setting,
names in the Uconnect™ Phonebook.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119
• Phonebook (Downloaded and Uconnect™ Phone Lo- • low road noise,
cal) name recognition rate is optimized when the
• smooth road surface,
entries are not similar.
• fully closed windows,
• Numbers must be spoken in single digits. “800” must
be spoken “eight-zero-zero” not “eight hundred”. • dry weather conditions, and
3
• You can say “O” (letter “O”) for “0” (zero). • operation from the driver’s seat.
• Even though international dialing for most number • Performance, such as audio clarity, echo, and loudness
combinations is supported, some shortcut dialing to a large degree rely on the phone and network, and
number combinations may not be supported. not the Uconnect™ Phone.
• In a convertible vehicle, system performance may be • Echo at the phone far end can sometimes be reduced
compromised with the convertible top down. by lowering the in-vehicle audio volume.
Far End Audio Performance • In a convertible vehicle, system performance may be
compromised with the convertible top down.
• Audio quality is maximized under:
• low-to-medium blower setting,
• low-to-medium vehicle speed,
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Recent Calls After reading a message, you can “Reply” or “Forward”
If your phone supports “Automatic Phonebook Down- the message using Uconnect™ Phone.
load”, Uconnect™ Phone can list your Outgoing, Incom-
Send Messages:
ing and Missed Calls.
You can send messages using Uconnect™ Phone. To send
SMS a new message:
Uconnect™ Phone can read or send new messages on
• Press the button.
your phone.
• After the “Ready” prompt and the following beep, say
Read Messages:
“SMS Send” or “Send Message.”
If you receive a new text message while your phone is
connected to Uconnect™ Phone, an announcement will • You can either say the message you wish to send or say
be made to notify you that you have a new text message. “List Messages.” There are 20 preset messages.
If you wish to hear the new message:
To send a message, press the button while the
• Press the button. system is listing the message and say “Send.”
• After the “Ready” prompt and the following beep, say Uconnect™ Phone will prompt you to say the name or
“SMS Read” or “Read Messages.” number of the person you wish to send the message to.
• Uconnect™ Phone will play the new text message for
you.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121
List of Preset Messages: 11. See You in 15 minutes
1. Yes 12. I am on my way
2. No 13. I’ll be late
3. Where are you? 14. Are you there yet?
3
4. I need more direction. 15. Where are we meeting?
5. L O L 16. Can this wait?
6. Why 17. Bye for now
7. I love you 18. When can we meet
8. Call me 19. Send number to call
9. Call me later 20. Start without me
10. Thanks
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Turn SMS Incoming Announcement ON/OFF Bluetooth威 Communication Link
Turning the SMS Incoming Announcement OFF will stop Mobile phones have been found to lose connection to the
the system from announcing the new incoming mes- Uconnect™ Phone. When this happens, the connection
sages. can generally be reestablished by switching the phone
off/on. Your mobile phone is recommended to remain in
• Press the button.
Bluetooth威 ON mode.
• After the “Ready” prompt and the following beep, say
Power-Up
“Setup, SMS Incoming Message Announcement,” you
After switching the ignition key from OFF to either the
will then be given a choice to change it.
ON or ACC position, or after a language change, you
must wait at least fifteen seconds prior to using the
system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123

3
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125

3
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Voice Commands Voice Commands

Primary Alternate(s) Primary Alternate(s)
zero call
one cancel
two confirmation prompts
three continue
four delete
five dial
six download
seven edit
eight emergency
nine English
star (*) erase all
plus (+) Espanol
pound (#) Francais
add location help
all home
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127

Voice Commands Voice Commands

Primary Alternate(s) Primary Alternate(s)
language return to main menu return or main menu
list names select phone select
list phones send
3
mobile set up phone settings or phone
mute set up
mute off towing assistance
new entry transfer call
no Uconnect™ Tutorial
other try again
pair a phone voice training
phone pairing pairing work
phonebook phone book yes
previous
record again
redial
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
General Information NOTE: Take care to speak into the Voice Interface
This device complies with Part 15 of the FCC rules and System as calmly and normally as possible. The ability of
RSS 210 of Industry Canada. Operation is subject to the the Voice Interface System to recognize user voice com-
following conditions: mands may be negatively affected by rapid speaking or a
raised voice level.
• Changes or modifications not expressly approved by
the party responsible for compliance could void the
WARNING!
user’s authority to operate the equipment.
Any voice commanded system should be used only
• This device may not cause harmful interference.
in safe driving conditions following local laws. All
• This device must accept any interference received, attention should be kept on the roadway ahead.
including interference that may cause undesired Failure to do so may result in a collision causing
operation. serious injury or death.

VOICE COMMAND — IF EQUIPPED When you press the Voice Command button, you
Voice Command System Operation will hear a beep. The beep is your signal to give a
This Voice Command system allows you to command.
control your AM, FM radio, satellite radio, disc
player, and a memo recorder.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129
NOTE: If you do not say a command within a few The system will best recognize your speech if the win-
seconds, the system will present you with a list of options. dows are closed, and the heater/air conditioning fan is
set to low.
If you ever wish to interrupt the system while it lists
options, press the Voice Command button, listen At any point, if the system does not recognize one of your
for the beep, and say your command. commands, you will be prompted to repeat it.
3
Pressing the Voice Command button while the To hear the first available Menu, press the Voice Com-
system is speaking is known as “barging in.” The system mand button and say “Help” or “Main Menu”.
will be interrupted, and after the beep, you can add or
Commands
change commands. This will become helpful once you
The Voice Command system understands two types of
start to learn the options.
commands. Universal commands are available at all
NOTE: At any time, you can say the words “Cancel”, times. Local commands are available if the supported
“Help” or “Main Menu”. radio mode is active.
These commands are universal and can be used from any Changing the Volume
menu. All other commands can be used depending upon
1. Start a dialogue by pressing the Voice Command
the active application.
button.
When using this system, you should speak clearly and at
2. Say a command (e.g., “Help”).
a normal speaking volume.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
3. Use the ON/OFF VOLUME rotary knob to adjust the Radio AM
volume to a comfortable level while the Voice Command To switch to the AM band, say “AM” or “Radio AM”. In
system is speaking. Please note the volume setting for this mode, you may say the following commands:
Voice Command is different than the audio system.
• “Frequency #” (to change the frequency)
Main Menu
• “Next Station” (to select the next station)
Start a dialogue by pressing the Voice Command
button. You may say “Main Menu” to switch to the main • “Previous Station” (to select the previous station)
menu.
• “Radio Menu” (to switch to the radio menu)
In this mode, you can say the following commands:
• “Main Menu” (to switch to the main menu)
• “Radio” (to switch to the radio mode)
Radio FM
• “Disc” (to switch to the disc mode) To switch to the FM band, say “FM” or “Radio FM”. In
this mode, you may say the following commands:
• “Memo” (to switch to the memo recorder)
• “Frequency #” (to change the frequency)
• “Setup” (to switch to system setup)
• “Next Station” (to select the next station)
• “Previous Station” (to select the previous station)
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131
• “Menu Radio” (to switch to the radio menu) Disc
To switch to the disc mode, say “Disc”. In this mode, you
• “Main Menu” (to switch to the main menu)
may say the following commands:
Satellite Radio
• “Track” (#) (to change the track)
To switch to satellite radio mode, say “Sat” or “Satellite
Radio”. In this mode, you may say the following com- • “Next Track” (to play the next track) 3
mands:
• “Previous Track” (to play the previous track)
• “Channel Number” (to change the channel by its
• “Main Menu” (to switch to the main menu)
spoken number)
Memo
• “Next Channel” (to select the next channel)
To switch to the voice recorder mode, say “Memo”. In
• “Previous Channel” (to select the previous channel) this mode, you may say the following commands:
• “List Channel” (to hear a list of available channels) • “New Memo” (to record a new memo) — During the
recording, you may press the Voice Command
• “Select Name” (to say the name of a channel)
button to stop recording. You proceed by saying one of
• “Menu Radio” (to switch to the radio menu) the following commands:
• “Main Menu” (to switch to the main menu) − “Save” (to save the memo)
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
− “Continue” (to continue recording) • “Switch to system setup”
− “Delete” (to delete the recording) • “Change to setup”
• “Play Memos” (to play previously recorded memos) • “Main menu setup” or
— During the playback you may press the Voice
• “Switch to setup”
Command button to stop playing memos. You
proceed by saying one of the following commands: In this mode, you may say the following commands:
− “Repeat” (to repeat a memo) • “Language English”
− “Next” (to play the next memo) • “Language French”
− “Previous” (to play the previous memo) • “Language Spanish”
− “Delete” (to delete a memo) • “Tutorial”
• “Delete All” (to delete all memos) • “Voice Training”
Setup NOTE: Keep in mind that you have to press the Voice
To switch to system setup, you may say on of the Command button first and wait for the beep before
following: speaking the “Barge In” commands.
• “Change to setup”
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133
Voice Training SEATS
For users experiencing difficulty with the system recog- Seats are a part of the Occupant Restraint System of the
nizing their voice commands or numbers the Uconnect™ vehicle.
Voice “Voice Training” feature may be used.
WARNING!
1. Press the Voice Command button, say “System
Setup” and once you are in that menu then say “Voice • It is dangerous to ride in a cargo area, inside or 3
Training.” This will train your own voice to the system outside of a vehicle. In a collision, people riding in
and will improve recognition. these areas are more likely to be seriously injured
or killed.
2. Repeat the words and phrases when prompted by
Uconnect™ Voice. For best results, the “Voice Training” • Do not allow people to ride in any area of your
session should be completed when the vehicle is parked, vehicle that is not equipped with seats and seat
engine running, all windows closed, and the blower fan belts. In a collision, people riding in these areas
switched off. This procedure may be repeated with a new are more likely to be seriously injured or killed.
user. The system will adapt to the last trained voice only. • Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Power Seats — If Equipped
WARNING!
Some models may be equipped with a power driver’s
seat. The power seat switch is located on the outboard • Adjusting a seat while driving may be dangerous.
side of the seat near the floor. Use the switch to move the Moving a seat while driving could result in loss of
seat up, down, forward, rearward, or to tilt the seat. control which could cause a collision and serious
injury or death.
• Seats should be adjusted before fastening the seat
belts and while the vehicle is parked. Serious
injury or death could result from a poorly adjusted
seat belt.

CAUTION!
Do not place any article under a power seat or
impede its ability to move as it may cause damage to
the seat controls. Seat travel may become limited if
movement is stopped by an obstruction in the seat’s
Power Seat Switch path.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135
Adjusting The Seat Forward Or Rearward Heated Seats — If Equipped
The seat can be adjusted both forward and rearward. On some models, the front driver and passenger seats
Push the seat switch forward or rearward, the seat will may be equipped with heaters in both the seat cushions
move in the direction of the switch. Release the switch and seatbacks. The controls for the front heated seats are
when you have reached the desired position. located on the center instrument panel area.
Adjusting The Seat Up Or Down You can choose from HIGH, LOW or OFF heat settings. 3
The height of the seats can be adjusted up or down. Pull Amber indicator lights in each switch indicate the level of
upward or push downward on the seat switch, the seat heat in use. Two indicator lights will illuminate for
will move in the direction of the switch. Release the HIGH, one for LOW and none for OFF.
switch when you have reached the desired position.
Press the switch once to select HIGH-level
Tilting The Seat Up Or Down heating. Press the switch a second time to select
The angle of the seat cushion can be adjusted in four LOW-level heating. Press the switch a third
directions. Pull upward or push downward on the front time to shut the heating elements OFF.
or rear of the seat switch, the front or rear of the seat
If HIGH-level heating is selected, the system automati-
cushion will move in the direction of the switch. Release
cally switches to LOW-level heating and turns one indi-
the switch when you have reached the desired position.
cator light OFF after a maximum of 60 minutes of
continuous operation. It will turn the heater and the
remaining indicator light OFF after an a maximum of
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
45 minutes of continuous operation. If LOW-level heating
WARNING! (Continued)
is selected, the system automatically turns the heater and
the indicator light OFF after a maximum of 45 minutes of • Do not place anything on the seat or seatback that
continuous operation. insulates against heat, such as a blanket or cush-
ion. This may cause the seat heater to overheat.
NOTE: Once a heat setting is selected, heat will be felt Sitting in a seat that has been overheated could
within two to five minutes. cause serious burns due to the increased surface
temperature of the seat.
WARNING!
• Persons who are unable to feel pain to the skin Manual Front Seat Adjustment
because of advanced age, chronic illness, diabetes, On models equipped with manual seats, the adjusting
spinal cord injury, medication, alcohol use, ex- bar is located at the front of the seats, near the floor.
haustion or other physical condition must exercise While sitting in the seat, lift up on the bar and move the
care when using the seat heater. It may cause burns seat forward or rearward. Release the bar once the
even at low temperatures, especially if used for desired position has been reached. Then, using body
long periods of time. pressure, move forward and rearward on the seat to be
(Continued) sure that the seat adjusters have latched.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137

WARNING!
• Adjusting a seat while driving may be dangerous.
Moving a seat while driving could result in loss of
control which could cause a collision and serious
injury or death. 3
• Seats should be adjusted before fastening the seat
belts and while the vehicle is parked. Serious
injury or death could result from a poorly adjusted
seat belt.

Front Seat Adjustment Bar

138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Manual Seat Height Adjustment — If Equipped Manual Lumbar — If Equipped
The driver’s seat height can be raised or lowered by using The lumbar adjustment handle is located on the outboard
a lever, located on the outboard side of the seat. Pull side of the driver’s seatback. Rotate the lever downward
upward on the lever to raise the seat height or push to increase the lumbar support or rotate the lever upward
downward on the lever to lower the seat height. to decrease the lumbar support.

Seat Height Adjustment Lever Lumbar Adjustment Lever

 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139
Driver’s Seatback Recline
WARNING!
To adjust the seatback, lift the lever located on the
outboard side of the seat, lean back to the desired angle Do not ride with the seatback reclined so that the
and release the lever. To return the seatback, lift the lever, shoulder belt is no longer resting against your chest.
lean forward and release the lever. In a collision you could slide under the seat belt,
which could result in serious injury or death. 3

Reclining Seat Lever

140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Fold-Flat Front Passenger Seat
To fold the front passenger seat, lift the recliner handle to
the full upward position and push the seatback forward
until it rests on the seat cushion.

Front Passenger Seat Folded Flat

Fold-Flat Front Passenger Seat Lever

 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141
Head Restraints Active Head Restraints — Front Seats
Head restraints are designed to reduce the risk of injury Active Head Restraints are passive, deployable compo-
by restricting head movement in the event of a rear nents, and vehicles with this equipment cannot be readily
impact. Head restraints should be adjusted so that the top identified by any markings, only through visual inspec-
of the head restraint is located above the top of your ear. tion of the head restraint. The head restraint will be split
in two halves, with the front half being soft foam and 3
WARNING! trim, the back half being decorative plastic.
The head restraints for all occupants must be prop- When AHRs deploy during a rear impact, the front half
erly adjusted prior to operating the vehicle or occu- of the head restraint extends forward to minimize the gap
pying a seat. Head restraints should never be ad- between the back of the occupant’s head and the AHR.
justed while the vehicle is in motion. Driving a This system is designed to help prevent or reduce the
vehicle with the head restraints improperly adjusted extent of injuries to the driver and front passenger in
or removed could cause serious injury or death in the certain types of rear impacts. Refer to “Occupant Re-
event of a collision. straints” in “Things To Know Before Starting Your Ve-
hicle” for further information.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
To raise the head restraint, pull upward on the head For comfort the Active Head Restraints can be tilted
restraint. To lower the head restraint, press the push forward and backward. To tilt the head restraint closer to
button, located at the base of the head restraint, and push the back of your head, pull forward on the bottom of the
downward on the head restraint. head restraint. Push rearward on the bottom of the head
restraint to move the head restraint away from your
head.

Push Button

Active Head Restraint (Normal Position)

 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143
• In the event of deployment of an Active Head Re-
straint, refer to “Occupant Restraints/Resetting Active
Head Restraints (AHR)” in “Things To Know Before
Starting Your Vehicle” for further information.

WARNING! 3
• Do not place items over the top of the Active Head
Restraint, such as coats, seat covers or portable
DVD players. These items may interfere with the
operation of the Active Head Restraint in the event
of a collision and could result in serious injury or
Active Head Restraint (Tilted) death.
NOTE: (Continued)
• The head restraints should only be removed by quali-
fied technicians, for service purposes only. If either of
the head restraints require removal, see your autho-
rized dealer.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Folding Rear Seat
WARNING! (Continued)
To provide additional storage area, each rear seatback can
• Active Head Restraints may be deployed if they be folded forward. Pull the strap forward to move the
are struck by an object such as a hand, foot or loose seatback forward and flat.
cargo. To avoid accidental deployment of the Ac-
tive Head Restraint ensure that all cargo is se-
cured, as loose cargo could contact the Active Head
Restraint during sudden stops. Failure to follow
this warning could cause personal injury if the
Active Head Restraint is deployed.

Rear Head Restraints

The head restraints in the rear are non adjustable. Refer to
“Occupant Restraints” in “Things To Know Before Start-
ing Your Vehicle” for information on Tether routing.

Folding Rear Seat

 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145

WARNING!
Be certain that the seatback is securely locked into
position. If the seatback is not securely locked into
position the seat will not provide the proper stability
for child seats and/or passengers. An improperly 3
latched seat could cause serious injury.

Reclining Rear Seat — If Equipped

For additional comfort, pull the strap forward just
enough to release the seatback latch. Then push the
seatback to a reclined position, approximately 35 degrees
Rear Seats Folded Flat maximum, and release the strap.
To raise the seatback, pull the strap forward and lift the
seatback into its upright position.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WARNING!
Do not ride with the seatback reclined so that the
shoulder belt is no longer resting against your chest.
In a collision you could slide under the seat belt and
be seriously or even fatally injured. Use the recliner
only with the vehicle is parked.

TO OPEN AND CLOSE THE HOOD

To open the hood, two latches must be released.
1. Pull the hood release lever located on the left kick
panel. Hood Release Lever
2. Move the safety latch, located outside the vehicle
under the front edge of the hood, toward the center and
raise the hood.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147

CAUTION!
To prevent possible damage, do not slam the hood to
close it. Lower the hood until it is open approxi-
mately 8 in (20 cm) and then drop it. This should
secure both latches. Never drive your vehicle unless 3
the hood is fully closed, with both latches engaged.

WARNING!
Be sure the hood is fully latched before driving your
vehicle. If the hood is not fully latched, it could open
Safety Latch when the vehicle is in motion and block your vision.
Lift the hood prop rod, clipped to the right side (left side Failure to follow this warning could result in serious
facing hood) of the engine compartment to secure the injury or death.
hood in the open position. Place the hood prop at the
location stamped into the inner hood surface.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
LIGHTS Headlights And Parking Lights
Multifunction Lever Turn the end of the multifunction lever to the first detent
The multifunction lever controls the operation of the to turn on the parking lights.
headlights, parking lights, turn signals, headlight beam Turn the end of the lever to the second detent to turn on
selection, instrument panel light dimming, interior lights, the headlights.
the passing lights and the fog lights. The multifunction
lever is located on the left side of the steering column.

Headlight Control
Multifunction Lever
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149
Daytime Running Lights — If Equipped
The high beam lights will come on as Daytime Running
Lights (lower intensity), whenever the ignition is ON, the
engine is running, the headlight switch is off, the parking
brake is off, the turn signal is off, and the shift lever is in
any position except PARK. 3
Lights-On Reminder
If the headlights or parking lights are left on after the
ignition is turned OFF, a chime will sound to alert the
driver when the driver’s door is opened.
Fog Lights — If Equipped
The front fog light switch is on the multifunction Front Fog Lights Control
lever. To activate the front fog lights, turn on the NOTE: The fog lights will only operate with the head-
parking lights or the low beam headlights and pull lights on low beam. Selecting high beam headlights will
out the end of the multifunction lever. turn off the fog lights.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Turn Signals NOTE: If either light remains on and does not flash, or
Move the multifunction lever up or down and the arrows there is a very fast flash rate, check for a defective outside
on each side of the instrument cluster flash to show light bulb. If an indicator fails to light when the lever is
proper operation of the front and rear turn signal lights. moved, it would suggest that the indicator bulb is
defective.
Lane Change Assist
Tap the lever up or down once, without moving beyond
the detent, and the turn signal (right or left) will flash
three times then automatically turn off.
High/Low Beam Switch
Push the multifunction lever away from you to switch
the headlights to high beam. Pull the multifunction lever
toward you, to switch the headlights back to low beam.
Flash-To-Pass
You can signal another vehicle with your headlights by
Turn Signals
lightly pulling the multifunction lever toward you. This
will turn on the high beam headlights until the lever is
released.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151
NOTE: If the multifunction lever is held in the flash-to- Rotate the center portion of the lever upward to the last
pass position for more than 20 seconds, the high beams detent to turn on the interior lighting.
will shut off. If this occurs, wait 30 seconds for the next
flash-to-pass operation.
Instrument Panel Dimming
Rotate the center portion of the lever to the extreme 3
bottom position to fully dim the instrument panel lights
and prevent the interior lights from illuminating when a
door is opened.
Rotate the center portion of the lever up to increase the
brightness of the instrument panel lights when the park-
ing lights or headlights are on.
Rotate the center portion of the lever upward to the next
Dimmer Control
detent position to brighten the odometer and radio when
the parking lights or headlights are on.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Map/Reading Lights NOTE: The lights will remain on until the switch is
These lights are mounted between above the rear view pressed a second time, so be sure they have been turned
mirror. Each light is turned on by pressing the button. off before leaving the vehicle. They will not turn off
Press the button a second time to turn the light off. The automatically.
lights also come on when a door is opened or the dimmer
control is turned fully upward, past the second detent. WINDSHIELD WIPERS AND WASHERS
The windshield wiper/washer control lever is
located on the right side of the steering column.
The front wipers are operated by rotating a
switch, located on the end of the lever. For information
on the rear wiper/washer, refer to “Rear Window Fea-
tures” in “Understanding The Features Of Your Vehicle”.

Map/Reading Lights
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153

CAUTION!
• Turn the windshield wipers off when driving
through an automatic car wash. Damage to the
windshield wipers may result if the wiper control
is left in any position other than off. 3
• In cold weather, always turn off the wiper switch
and allow the wipers to return to the “Park”
position before turning off the engine. If the wiper
switch is left on and the wipers freeze to the
windshield, damage to the wiper motor may occur
when the vehicle is restarted.
Wiper/Washer Control Lever • Always remove any buildup of snow that prevents
the windshield wiper blades from returning to the
off position. If the windshield wiper control is
turned off and the blades cannot return to the off
position, damage to the wiper motor may occur.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Windshield Wiper Operation Intermittent Wiper System
Rotate the end of the lever upward to the second detent past Use the intermittent wiper when weather conditions
the intermittent settings for low-speed wiper operation. make a single wiping cycle, with a variable pause be-
Rotate the end of the lever upward to the third detent tween cycles, desirable. Select the delay interval by
past the intermittent settings for high-speed wiper opera- turning the end of the lever. Rotate the end of the lever
tion. upward (clockwise) to decrease the delay time and
downward (counterclockwise) to increase the delay time.
The delay can be regulated from a maximum of approxi-
mately 18 seconds between cycles, to a cycle every
second.
NOTE: The wiper delay times depend on vehicle speed.
If the vehicle is moving less than 10 mph (16 km/h),
delay times will be doubled.

Wiper Control
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155
Windshield Washers
WARNING!
To use the washer, pull the control lever toward you and
hold while spray is desired. If the lever is pulled while in Sudden loss of visibility through the windshield
the delay range, the wiper will operate in low-speed could lead to a collision. You might not see other
while the lever is pulled and for two wipe cycles after the vehicles or other obstacles. To avoid sudden icing of
lever is released, and then resume the intermittent inter- the windshield during freezing weather, warm the 3
val previously selected. windshield with the defroster before and during
windshield washer use.
If the lever is pulled while in the off position, the wipers
will operate for two wipe cycles, then turn off.
Mist Feature
Push down on the control lever to activate a single wipe
to clear the windshield of road mist or spray from a
passing vehicle. As long as the lever is held down, the
wipers will continue to operate.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE: The mist feature does not activate the washer TILT STEERING COLUMN
pump; therefore, no washer fluid will be sprayed on the This feature allows you to tilt the steering column
windshield. The wash function must be used in order to upward or downward. The tilt control handle is located
spray the windshield with washer fluid. on the left side of the steering column, below the turn
signal lever.
Push down on the lever to unlock the steering column.
With one hand firmly on the steering wheel, move the
steering column up or down, as desired. Push the lever
up to lock the steering column firmly in place.

Mist Control
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157

WARNING!
Do not adjust the steering column while driving.
Adjusting the steering column while driving or driv-
ing with the steering column unlocked, could cause
the driver to lose control of the vehicle. Be sure the 3
steering column is locked before driving your ve-
hicle. Failure to follow this warning may result in
serious injury or death.

ELECTRONIC SPEED CONTROL — IF EQUIPPED

When engaged, the Electronic Speed Control takes over
Tilting Steering Column Control
accelerator operations at speeds greater than 25 mph
(40 km/h).
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
The Electronic Speed Control buttons are located on the down if multiple Speed Control functions are operated at
right side of the steering wheel. the same time. If this occurs, the Electronic Speed Control
System can be reactivated by pushing the Electronic
Speed Control ON/OFF button and resetting the desired
vehicle set speed.
To Activate
Push the ON/OFF button. The Cruise Indicator Light in
the instrument cluster will illuminate. To turn the system
off, push the ON/OFF button a second time. The Cruise
Indicator Light will turn off. The system should be
turned off when not in use.

WARNING!
Electronic Speed Control Buttons Leaving the Electronic Speed Control system on
1 — ON/OFF 2 — RES + when not in use is dangerous. You could accidentally
4 — CANCEL 3 — SET - set the system or cause it to go faster than you want.
NOTE: In order to ensure proper operation, the Elec- You could lose control and have an accident. Always
tronic Speed Control System has been designed to shut leave the system OFF when you are not using it.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159
To Set A Desired Speed To Resume Speed
Turn the Electronic Speed Control ON. When the vehicle To resume a previously set speed, push the RES (+)
has reached the desired speed, press the SET (-) button button and release. Resume can be used at any speed
and release. Release the accelerator and the vehicle will above 20 mph (32 km/h).
operate at the selected speed.
To Vary The Speed Setting
NOTE: The vehicle should be traveling at a steady When the Electronic Speed Control is set, you can in- 3
speed and on level ground before pressing the SET (-) crease speed by pushing the RES (+) button. If the button
button. is continually pressed, the set speed will continue to
increase until the button is released, then the new set
To Deactivate
speed will be established.
A soft tap on the brake pedal, pushing the CANCEL
button, or normal brake pressure while slowing the Pressing the RES (+) button once will result in a 1 mph
vehicle will deactivate Electronic Speed Control without (2 km/h) increase in set speed. Each subsequent tap of
erasing the set speed memory. Pressing the ON/OFF the button results in an increase of 1 mph (2 km/h).
button or turning the ignition switch OFF erases the set
speed memory.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
To decrease speed while the Electronic Speed Control is On steep hills, a greater speed loss or gain may occur so
set, push the SET (-) button. If the button is continually it may be preferable to drive without Electronic Speed
held in the SET (-) position, the set speed will continue to Control.
decrease until the button is released. Release the button
when the desired speed is reached, and the new set speed WARNING!
will be established.
Electronic Speed Control can be dangerous where the
Pressing the SET (-) button once will result in a 1 mph system cannot maintain a constant speed. Your ve-
(2 km/h) decrease in set speed. Each subsequent tap of hicle could go too fast for the conditions, and you
the button results in a decrease of 1 mph (2 km/h). could lose control and have an accident. Do not use
Electronic Speed Control in heavy traffic or on roads
To Accelerate For Passing
that are winding, icy, snow-covered or slippery.
Press the accelerator as you would normally. When the
pedal is released, the vehicle will return to the set speed.
GARAGE DOOR OPENER — IF EQUIPPED
Using Electronic Speed Control On Hills HomeLink威 replaces up to three hand-held transmitters
The transmission may downshift on hills to maintain the that operate devices such as garage door openers, motor-
vehicle set speed. ized gates, lighting or home security systems. The
NOTE: The Electronic Speed Control system maintains HomeLink威 unit is powered by your vehicles 12 Volt
speed up and down hills. A slight speed change on battery.
moderate hills is normal.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161
The HomeLink威 buttons, located on either the overhead
console, headliner or sunvisor, designate the three differ-
ent HomeLink威 channels. The HomeLink威 indicator is
located above the center button.

HomeLink威 Buttons/Sunvisor/Headliner
NOTE: HomeLink威 is disabled when the Vehicle Secu-
rity Alarm is active.

HomeLink威 Buttons/Overhead Consoles

162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Before You Begin Programming HomeLink姞 NOTE:
Be sure that your vehicle is parked outside of the garage • Erasing all channels should only be performed when
before you begin programming. programming HomeLink威 for the first time. Do not
erase channels when programming additional buttons.
For more efficient programming and accurate transmis-
sion of the radio-frequency signal it is recommended that • If you have any problems, or require assistance, please
a new battery be placed in the hand-held transmitter of call toll-free 1–800–355–3515 or, on the Internet at
the device that is being programmed to the HomeLink威 www.HomeLink.com for information or assistance.
system.
Programming A Rolling Code
Erase all channels before you begin programming. To For programming garage door openers that were manu-
erase the channels place the ignition in the ON/RUN factured after 1995. These garage door openers can be
position and press and hold the two outside HomeLink威 identified by the “LEARN” or “TRAIN” button located
buttons (I and III) for up 20 seconds or until the red where the hanging antenna is attached to the garage door
indicator flashes. opener. It is NOT the button that is normally used to
open and close the door. The name and color of the
button may vary by manufacturer.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163
3. Simultaneously press and hold both the Homelink威
button you want to program and the hand-held transmit-
ter button.
4. Continue to hold both buttons and observe the indi-
cator light. The Homelink威 indicator will flash slowly
and then rapidly after Homelink威 has received the fre- 3
quency signal from the hand-held transmitter. Release
both buttons after the indicator light changes from slow
to rapid.
5. At the garage door opener motor (in the garage),
locate the “LEARN” or “TRAINING” button. This can
Training The Garage Door Opener usually be found where the hanging antenna wire is
1 — Door Opener attached to the garage door opener/device motor. Firmly
2 — Training Button press and release the “LEARN” or “TRAINING” button.
1. Turn the ignition switch to the ON/RUN position. On some garage door openers/devices there may be a
light that blinks when the garage door opener/device is
2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) in the LEARN/TRAIN mode.
away from the HomeLink威 button you wish to program
while keeping the HomeLink威 indicator light in view.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE: You have 30 seconds in which to initiate the next 2. Press and hold the desired HomeLink威 button until
step after the LEARN button has been pressed. the indicator light begins to flash after 20 seconds. Do not
release the button.
6. Return to the vehicle and press the programmed
HomeLink威 button twice (holding the button for two 3. Without releasing the button proceed with “Program-
seconds each time). If the garage door opener/device ming A Rolling Code” Step 2 and follow all remaining
activates, programming is complete. steps.
NOTE: If the garage door opener/device does not Programming A Non-Rolling Code
activate, press the button a third time (for two seconds) to For programming Garage Door Openers manufactured
complete the training. before 1995.
To program the remaining two HomeLink威 buttons, 1. Turn the ignition switch to the ON/RUN position.
repeat each step for each remaining button. DO NOT
2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)
erase the channels.
away from the HomeLink威 button you wish to program
Reprogramming A Single HomeLink威 Button while keeping the HomeLink威 indicator light in view.
To reprogram a channel that has been previously trained,
3. Simultaneously press and hold both the Homelink威
follow these steps:
button you want to program and the hand-held transmit-
1. Turn the ignition switch to the ON/RUN position. ter button.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165
4. Continue to hold both buttons and observe the indi- Reprogramming A Single HomeLink威 Button
cator light. The Homelink威 indicator will flash slowly To reprogram a channel that has been previously trained,
and then rapidly after Homelink威 has received the fre- follow these steps:
quency signal from the hand-held transmitter. Release
1. Turn the ignition switch to the ON/RUN position.
both buttons after the indicator light changes from slow
to rapid. 2. Press and hold the desired HomeLink威 button until 3
the indicator light begins to flash after 20 seconds. Do not
5. Press and hold the programmed HomeLink威 button
release the button.
and observe the indicator light.
3. Without releasing the button proceed with “Program-
• If the indicator light stays on constantly, program-
ming A Non-Rolling Code” Step 2 and follow all remain-
ming is complete and the garage door/device
ing steps.
should activate when the HomeLink威 button is
pressed. Canadian/Gate Operator Programming
For programming transmitters in Canada/United States
• To program the two remaining HomeLink威 buttons,
that require the transmitter signals to “time-out” after
repeat each step for each remaining button. DO
several seconds of transmission.
NOT erase the channels.
Canadian radio frequency laws require transmitter sig-
nals to time-out (or quit) after several seconds of trans-
mission – which may not be long enough for HomeLink威
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
to pick up the signal during programming. Similar to this 4. Watch for the HomeLink威 indicator to change flash
Canadian law, some U.S. gate operators are designed to rates. When it changes, it is programmed. It may take up
time-out in the same manner. to 30 seconds or longer in rare cases. The garage door
may open and close while you are programming.
It may be helpful to unplug the device during the cycling
process to prevent possible overheating of the garage 5. Press and hold the programmed HomeLink威 button
door or gate motor. and observe the indicator light.
1. Turn the ignition switch to the ON/RUN position. • If the indicator light stays on constantly, program-
ming is complete and the garage door/device
2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)
should activate when the HomeLink威 button is
away from the HomeLink威 button you wish to program
pressed.
while keeping the HomeLink威 indicator light in view.
• To program the two remaining HomeLink威 buttons,
3. Continue to press and hold the HomeLink威 button,
repeat each step for each remaining button. DO
while you press and release (“cycle”), your hand-held
NOT erase the channels.
transmitter every two seconds until HomeLink威 has
successfully accepted the frequency signal. The indicator If you unplugged the garage door opener/device for
light will flash slowly and then rapidly when fully programming, plug it back in at this time.
trained.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167
Reprogramming A Single HomeLink威 Button Using HomeLink姞
To reprogram a channel that has been previously trained, To operate, press and release the programmed
follow these steps: HomeLink威 button. Activation will now occur for the
programmed device (i.e., garage door opener, gate opera-
1. Turn the ignition switch to the ON/RUN position.
tor, security system, entry door lock, home/office light-
2. Press and hold the desired HomeLink威 button until ing, etc.,). The hand-held transmitter of the device may 3
the indicator light begins to flash after 20 seconds. Do not also be used at any time.
release the button.
Security
3. Without releasing the button proceed with It is advised to erase all channels before you sell or turn
“Canadian/Gate Operator Programming” Step 2 and in your vehicle.
follow all remaining steps.
To do this, press and hold the two outside buttons for
20 seconds until the red indicator flashes. Note that all
channels will be erased. Individual channels cannot be
erased.
The HomeLink威 Universal Transceiver is disabled when
the Vehicle Security Alarm is active.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Troubleshooting Tips
WARNING!
If you are having trouble programming HomeLink威, here
are some of the most common solutions: • Your motorized door or gate will open and close
while you are programming the universal trans-
• Replace the battery in the original hand-held transmit-
ceiver. Do not program the transceiver if people,
ter.
pets or other objects are in the path of the door or
• Press the LEARN button on the Garage Door Opener gate. Only use this transceiver with a garage door
to complete the training for a Rolling Code. opener that has a “stop and reverse” feature as
required by Federal safety standards. This includes
• Did you unplug the device for programming and
most garage door opener models manufactured
remember to plug it back in?
after 1982. Do not use a garage door opener without
If you have any problems, or require assistance, please these safety features. Call toll-free 1–800–355–3515
call toll-free 1–800–355–3515 or, on the Internet at or, on the Internet at www.HomeLink.com for
www.HomeLink.com for information or assistance. safety information or assistance.
• Vehicle exhaust contains carbon monoxide, a dan-
gerous gas. Do not run your vehicle in the garage
while programming the transceiver. Exhaust gas
can cause serious injury or death.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169
General Information POWER SUNROOF — IF EQUIPPED
This device complies with FCC rules Part 15 and Industry The power sunroof switch is located in the reading light.
Canada RSS-210. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
3
2. This device must accept any interference that may be
received including interference that may cause undesired
operation.
NOTE:
• The transmitter has been tested and it complies with
FCC and IC rules. Changes or modifications not
expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the
Power Sunroof Switch
device.
• The term IC before the certification/registration num-
ber only signifies that Industry Canada technical
specifications were met.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Opening Sunroof — Express
WARNING!
Press the switch rearward and release it within one-half
• Never leave children in a vehicle with the key in second and the sunroof will open automatically from any
the ignition switch. Occupants, particularly unat- position. The sunroof will open fully and stop automati-
tended children, can become entrapped by the cally. This is called “Express Open”. During Express
power sunroof while operating the power sunroof Open operation, any movement of the sunroof switch
switch. Such entrapment may result in serious will stop the sunroof.
injury or death.
Opening Sunroof — Manual Mode
• In a collision, there is a greater risk of being To open the sunroof, press and hold the switch rearward
thrown from a vehicle with an open sunroof. You to full open. Any release of the switch will stop the
could also be seriously injured or killed. Always movement and the sunroof will remain in a partially
fasten your seat belt properly and make sure all opened condition until the switch is pushed and held
passengers are properly secured too. rearward again.
• Do not allow small children to operate the sun-
roof. Never allow your fingers, other body parts, or
any object to project through the sunroof opening.
Injury may result.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171
Closing Sunroof — Express Pinch Protect Feature
Press the switch forward and release it within one-half This feature will detect an obstruction in the opening of
second and the sunroof will close automatically from any the sunroof during Express Close operation. If an ob-
position. The sunroof will close fully and stop automati- struction is detected, the sunroof will automatically re-
cally. This is called “Express Close”. During Express tract. Remove the obstruction if this occurs. Next, press
Close operation, any movement of the switch will stop the switch forward and release to Express Close. 3
the sunroof.
NOTE: If three consecutive sunroof close attempts re-
Closing Sunroof — Manual Mode sult in Pinch Protect reversals, the fourth close attempt
To close the sunroof, press and hold the switch in the will be a Manual Close movement with Pinch Protect
forward position. Any release of the switch will stop the disabled.
movement and the sunroof will remain in a partially
Venting Sunroof — Express
closed condition until the switch is pushed and held
Press and release the Vent button within one half second
forward again.
and the sunroof will open to the vent position. This is
called “Express Vent”, and it will occur regardless of
sunroof position. During Express Vent operation, any
movement of the switch will stop the sunroof.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Sunshade Operation Sunroof Maintenance
The sunshade can be opened manually. However, the Use only a non-abrasive cleaner and a soft cloth to clean
sunshade will open automatically as the sunroof opens. the glass panel.
NOTE: The sunshade cannot be closed if the sunroof is Ignition Off Operation
open. For vehicles not equipped with the Electronic Vehicle
Information Center (EVIC), the power sunroof switch
Wind Buffeting
will remain active for 45 seconds after the ignition switch
Wind buffeting can be described as the perception of
is turned to the LOCK position. Opening either front
pressure on the ears or a helicopter-type sound in the
door will cancel this feature.
ears. Your vehicle may exhibit wind buffeting with the
windows down, or the sunroof (if equipped) is in certain For vehicles equipped with the EVIC, the power sunroof
open or partially open positions. This is a normal occur- switch will remain active for up to approximately ten
rence and can be minimized. If the buffeting occurs with minutes after the ignition switch is turned to the LOCK
the rear windows open, open the front and rear windows position. Opening either front door will cancel this
together to minimize the buffeting. If the buffeting occurs feature. The time is programmable. Refer to “Electronic
with the sunroof open, adjust the sunroof opening to Vehicle Information Center (EVIC)/Personal Settings
minimize the buffeting or open any window. (Customer-Programmable Features)” in “Understanding
Your Instrument Panel” for further information.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173
ELECTRICAL POWER OUTLETS Power is available when the ignition switch is in the ON
There is a standard 12 Volt (13 Amp) power outlet located or ACC position. Insert the cigar lighter or accessory plug
in the instrument panel for added convenience. This into the outlet for use. To preserve the heating element,
power outlet can power cellular phones, electronics and do not hold the lighter in the heating position.
other low power devices.
NOTE: To ensure proper operation a MOPAR威 knob
and element must be used. 3

12 Volt Power Outlet

174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

CAUTION!
• Do not exceed the maximum power of 160 Watts
(13 Amps) at 12 Volts. If the 160 Watt (13 Amp)
power rating is exceeded the fuse protecting the
system will need to be replaced.
• Power outlets are designed for accessory plugs
only. Do not insert any other object in the power
outlets as this will damage the outlet and blow the
fuse. Improper use of the power outlet can cause
damage not covered by your New Vehicle Limited
Warranty.
Power Outlet Fuse Location
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175

WARNING! CAUTION!
To avoid serious injury or death: • Many accessories that can be plugged in draw
• Only devices designed for use in this type of power from the vehicle’s battery, even when not in
outlet should be inserted into any 12 Volt outlet. use (i.e., cellular phones, etc.). Eventually, if
• Do not touch with wet hands. plugged in long enough, the vehicle’s battery will 3
• Close the lid when not in use and while driving discharge sufficiently to degrade battery life
the vehicle. and/or prevent the engine from starting.
• If this outlet is mishandled, it may cause an • Accessories that draw higher power (i.e., coolers,
electric shock and failure. vacuum cleaners, lights, etc.) will degrade the
battery even more quickly. Only use these inter-
mittently and with great caution.
• After the use of high power draw accessories, or
long periods of the vehicle not being started (with
accessories still plugged in), the vehicle must be
driven a sufficient length of time to allow the
generator to recharge the vehicle’s battery.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
POWER INVERTER — IF EQUIPPED
A 115 Volt (150 Watt) AC power inverter is located on the
front of the center console for added convenience. This
outlet can power cellular phones, electronics and other
low power devices requiring power up to 150 Watts.
Certain high-end video games, such as Playstation3 and
XBox360 will exceed this power limit, as will most power
tools.
The power inverter is designed with built-in overload
protection. If the power rating of 150 Watts is exceeded,
the power inverter will automatically shut down. Once
the electrical device has been removed from the outlet the 115 Volt Power Outlet
inverter should automatically reset. If the power rating
exceeds approximately 170 Watts, the power inverter
may have to be reset manually. To reset the inverter
manually, unplug the device and plug it in again. To
avoid overloading the circuit, check the power ratings on
electrical devices prior to using the inverter.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177

WARNING! CAUTION!
To avoid serious injury or death: • Many accessories that can be plugged in draw
• Do not use a three-prong adaptor. power from the vehicle’s battery, even when not in
• Do not insert any objects into the receptacles. use (i.e., cellular phones, etc.). Eventually, if
• Do not touch with wet hands. plugged in long enough, the vehicle’s battery will 3
• Close the lid when not in use. discharge sufficiently to degrade battery life
• If this outlet is mishandled, it may cause an and/or prevent engine starting.
electric shock and failure. • Accessories that draw higher power (i.e., coolers,
vacuum cleaners, lights, etc.) will degrade the
battery even more quickly. Only use these inter-
mittently and with great caution.
• After the use of high power draw accessories, or
long periods of the vehicle not being started (with
accessories still plugged in), the vehicle must be
driven a sufficient length of time to allow the
generator to recharge the vehicle’s battery.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
CUPHOLDERS There are two cupholders located in the back for the rear
Your vehicle is equipped with four cupholders. There are passengers.
two illuminated cupholders located in the front.

Rear Cupholders
Illuminated Front Cupholders
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179
STORAGE To open the lower glove compartment, pull outward on
the release handle.
Glove Compartment And Storage Bin
Located on the passenger side of the instrument panel are
an upper storage bin and a lower glove compartment.

Glove Compartment

Storage Compartments
1 — Upper Storage Bin
2 — Lower Glove Compartment
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Door Storage
The interior door panels are equipped with lower storage
areas.

Rear Door Storage

Front Door Storage

 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181
CONSOLE FEATURES To open the lower storage compartment, lift upward on
The floor console contains both an upper and lower the lower handle to unlatch the lower storage compart-
storage compartment. ment and lift the lid open.
To open the upper storage compartment, push inward on
the upper handle to unlatch the upper lid and lift the lid
open. 3

Lower Storage Compartment

Upper Storage Compartment

182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Press in on the flashlight to release it.
WARNING!
Do not operate this vehicle with a console compart-
ment lid in the open position. Cellular phones, music
players, and other handheld electronic devices
should be stowed while driving. Use of these devices
while driving can cause an accident due to distrac-
tion, resulting in death or injury.

CARGO AREA FEATURES

Cargo Light/Removable Self-Recharging
Flashlight
The dual-function light is mounted in the headliner
Press And Release
above the cargo area to illuminate the cargo area, and
part of it snaps out of the bezel to serve as a flashlight To operate the flashlight, press the switch once for high,
when needed. The flashlight features two bright LED twice for low, and a third time to return to off.
light bulbs and is powered by rechargeable lithium
batteries that recharge when snapped back into place for
convenience.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183
To install the Cargo Cover, insert either end of the cover
into one of the two notches located in the rear trim
panels. With one of the cover ends installed, push inward
on the opposite end and install it into the same notch
location of the rear trim panel.
3

Three-Press Switch
Cargo Cover
The cargo area trim panels include two notches for
mounting the available tonneau cover that accommo-
dates the reclining rear seat.
Rear Trim Notches
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Using the handle, pull the cover toward you and guide
WARNING!
the rear cover posts into the guides located on both sides
of the rear trim panel. In a collision a cargo cover loose in the vehicle could
cause injury. It could fly around in a sudden stop and
strike someone in the vehicle. Do not store the cargo
cover on the cargo floor or in the passenger compart-
ment. Remove the cover from the vehicle when taken
from its mounting. Do not store in the vehicle.

Cargo Cover Guides

 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185
Removable Load Floor Cargo Tie-Down Loops
The cargo area load floor is removable and can be There are four D-rings installed in the cargo area for
washed with mild soap and water. securing cargo.

Cargo Load Floor D-Rings

186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WARNING! WARNING! (Continued)

• Cargo tie-down loops are not safe anchors for a • Place as much cargo as possible in front of the rear
child seat tether strap. In a sudden stop or collision axle. Too much weight or improperly placed
a loop could pull loose and allow the child seat to weight over or behind the rear axle can cause the
come loose. A child could be badly injured. Use rear of the vehicle to sway.
only the anchors provided for child seat tethers. • Do not pile luggage or cargo higher than the top of
• The weight and position of cargo and passengers the seatback. This could impair visibility or be-
can change the vehicle center of gravity and ve- come a dangerous projectile in a sudden stop or
hicle handling. To avoid loss of control resulting collision.
in personal injury, follow these guidelines for • To help protect against personal injury, passengers
loading your vehicle: should not be seated in the rear cargo area. The
• Always place cargo evenly on the cargo floor. Put rear cargo space is intended for load carrying
heavier objects as low and as far forward as purposes only, not for passengers, who should sit
possible. in seats and use seat belts.

(Continued)
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187
Fold Down Speakers — If Equipped REAR WINDOW FEATURES
When the liftgate is open, the speakers can swing down
Rear Window Wiper/Washer
off the trim panel to face rearward, for tailgating and
The rear wiper/washer is controlled by a rotary switch
other activities.
located on the center portion of the control lever. The
control lever is located on the right side of the steering
column. 3

Fold-Down Speakers

Rear Wiper/Washer Control

188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Rotate the center portion of the lever upward to the Rear Window Defroster
first detent position for rear wiper operation. The rear window defroster button is located on the
bottom right-side of the blower control knob.
NOTE: The rear wiper operates in an intermittent mode
Press this button to turn on the rear window defroster
only.
and the heated outside mirrors (if equipped). An indica-
Rotate the center portion of the lever past the first tor in the button will illuminate when the rear window
detent to activate the rear washer. The washer defroster is on. The rear window defroster automatically
pump and the wiper will continue to operate as turns off after approximately 10 minutes. For an addi-
long as the switch is held (for a maximum of 10 seconds). tional five minutes of operation, press the button a
Upon release, the wiper will continue to cycle two times second time.
before returning to the set position.
NOTE: To prevent excessive battery drain, use the rear
If the rear wiper is operating when the ignition is turned window defroster only when the engine is operating.
OFF, the wiper will automatically return to the “park”
position if power accessory delay is active. Power acces-
sory delay can be cancelled by opening the door, if this
happens the rear wiper will stop at its current position
and will not go to “park”.
 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189
ROOF LUGGAGE RACK — IF EQUIPPED
CAUTION!
The side rails and crossbars are designed to carry weight
Failure to follow these cautions can cause damage to on vehicles equipped with a luggage rack. The load must
the heating elements: not exceed 150 lbs (68 kg), and it should be uniformly
• Use care when washing the inside of the rear distributed over the luggage rack crossbars.
window. Do not use abrasive window cleaners on NOTE: Crossbars are offered by MOPAR威 accessories. 3
the interior surface of the window. Use a soft cloth
and a mild washing solution, wiping parallel to Crossbars should always be used whenever cargo is
the heating elements. Labels can be peeled off placed on the roof rack. Load should always be secured
after soaking with warm water. to cross bars first, with tie down loops used as additional
• Do not use scrapers, sharp instruments, or abra- securing points if needed. Tie loops are intended as
sive window cleaners on the interior surface of the supplementary tie down points only. Do not use ratchet-
window. ing mechanisms with the tie loops. Check the straps
• Keep all objects a safe distance from the window. frequently to be sure that the load remains securely
attached.
The roof rack does not increase the total load carrying
capacity of the vehicle. Be sure the total load of cargo
inside the vehicle plus that on the external rack does not
exceed the maximum vehicle load capacity.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

CAUTION! CAUTION! (Continued)

• To prevent damage to the roof of your vehicle, DO • Travel at reduced speeds and turn corners care-
NOT carry any loads on the roof rack without the fully when carrying large or heavy loads on the
crossbars installed. The load should be secured roof rack. Wind forces, due to natural causes or
and placed on top of the crossbars, not directly on nearby truck traffic, can add sudden upward loads.
the roof. If it is necessary to place the load on the This is especially true on large flat loads and may
roof, place a blanket or other protective layer result in damage to the cargo or your vehicle.
between the load and the roof surface.
• To avoid damage to the roof rack and vehicle, do WARNING!
not exceed the maximum roof rack load capacity of
150 lbs (68 kg). Always distribute heavy loads as Cargo must be securely tied down before driving
evenly as possible and secure the load appropri- your vehicle. Improperly secured loads can fly off the
ately. vehicle, particularly at high speeds, resulting in per-
sonal injury or property damage. Follow the roof rack
• Long loads, which extend over the windshield,
cautions when carrying cargo on your roof rack.
such as wood panels or surfboards, should be
secured to both the front and rear of the vehicle.
(Continued)
 UNDERSTANDING YOUR INSTRUMENT PANEL

CONTENTS
䡵 Instrument Panel Features . . . . . . . . . . . . . . . 194 ▫ EVIC Functions . . . . . . . . . . . . . . . . . . . . . 215
䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 195 ▫ Compass/Temperature/Audio . . . . . . . . . . . 216
4
䡵 Instrument Cluster Descriptions . . . . . . . . . . . 196 ▫ Average Fuel Economy . . . . . . . . . . . . . . . . 216
䡵 Mini-Trip Computer — If Equipped . . . . . . . . 209 ▫ Distance To Empty (DTE) . . . . . . . . . . . . . . 216
▫ Control Buttons . . . . . . . . . . . . . . . . . . . . . 210 ▫ Tire Pressure Monitor (TPM) . . . . . . . . . . . . 216
䡵 Electronic Vehicle Information Center ▫ Elapsed Time . . . . . . . . . . . . . . . . . . . . . . . 217
(EVIC) — If Equipped . . . . . . . . . . . . . . . . . . . 211
▫ Personal Settings
▫ Engine Oil Change Indicator System — If (Customer-Programmable Features) . . . . . . . 217
Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 214
192 UNDERSTANDING YOUR INSTRUMENT PANEL
䡵 Media Center 230 (REQ) — AM/FM Stereo 䡵 Media Center 730N/430/430N (RHR/RER/
Radio And 6–Disc CD/DVD Changer RBZ/RHB) CD/DVD/HDD/NAV — If
(MP3/WMA AUX Jack) . . . . . . . . . . . . . . . . . . 222 Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
▫ Operating Instructions - Radio Mode . . . . . . 223 ▫ Operating Instructions (Voice Command
System) — If Equipped . . . . . . . . . . . . . . . . 242
▫ Operation Instructions - (Disc Mode For CD
And MP3/WMA Audio Play, DVD-Video) . . . 231 ▫ Operating Instructions
(Uconnect™ Phone) — If Equipped . . . . . . . 242
▫ Notes On Playing MP3/WMA Files . . . . . . . 233
䡵 Media Center 130 (Sales Code RES) . . . . . . . . . 242
▫ List Button
(Disc Mode For MP3/WMA Play) . . . . . . . . . 235 ▫ Operating Instructions — Radio Mode . . . . . 242
▫ Info Button ▫ Operation Instructions — CD Mode For CD
(Disc Mode For MP3/WMA Play) . . . . . . . . . 235 And MP3 Audio Play . . . . . . . . . . . . . . . . . 245
▫ Uconnect™ Multimedia ▫ Notes On Playing MP3 Files . . . . . . . . . . . . 247
(Satellite Radio) — If Equipped . . . . . . . . . . 237
▫ Operation Instructions - Auxiliary Mode . . . . 250
 UNDERSTANDING YOUR INSTRUMENT PANEL 193
䡵 Media Center 130 With Satellite Radio ▫ Play Mode . . . . . . . . . . . . . . . . . . . . . . . . . 268
(Sales Code RES+RSC). . . . . . . . . . . . . . . . . . . 251
▫ List Or Browse Mode . . . . . . . . . . . . . . . . . 270
▫ Operating Instructions — Radio Mode . . . . . 251
▫ Bluetooth Streaming Audio (BTSA) . . . . . . . . 272
▫ Operation Instructions — CD Mode For CD
And MP3 Audio Play . . . . . . . . . . . . . . . . . 257 䡵 Steering Wheel Audio Controls . . . . . . . . . . . . 273
▫ Notes On Playing MP3 Files . . . . . . . . . . . . 259 ▫ Radio Operation . . . . . . . . . . . . . . . . . . . . . 274
▫ List Button (CD Mode For MP3 Play) . . . . . . 261 ▫ CD Player . . . . . . . . . . . . . . . . . . . . . . . . . 274 4
▫ Info Button (CD Mode For MP3 Play) . . . . . . 261 䡵 CD/DVD Disc Maintenance . . . . . . . . . . . . . . 274
▫ Uconnect™ Multimedia (Satellite Radio) — 䡵 Radio Operation And Mobile Phones . . . . . . . 275
If Equipped . . . . . . . . . . . . . . . . . . . . . . . . 262
䡵 Climate Controls . . . . . . . . . . . . . . . . . . . . . . 275
䡵 iPod威/USB/MP3 Control — If Equipped . . . . . 266
▫ Manual Heating And Air Conditioning . . . . . 276
▫ Connecting The iPod威 Or External USB
Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 ▫ Automatic Temperature Control (ATC) —
▫ Using This Feature . . . . . . . . . . . . . . . . . . . 268 If Equipped . . . . . . . . . . . . . . . . . . . . . . . . 280

▫ Controlling The iPod威 Or External USB ▫ Operating Tips . . . . . . . . . . . . . . . . . . . . . . 286

Device Using Radio Buttons . . . . . . . . . . . . . 268
194 UNDERSTANDING YOUR INSTRUMENT PANEL
INSTRUMENT PANEL FEATURES

1 — Air Outlet 5 — Storage Bin 9 — Heated Seat Switch – If Equipped

2 — Demisters 6 — Glove Compartment 10 — Hazard Warning Flasher
3 — Instrument Cluster 7 — Climate Controls 11 — ESC OFF Switch – If Equipped
4 — Radio 8 — Power Outlet 12 — Heated Seat Switch – If Equipped
 UNDERSTANDING YOUR INSTRUMENT PANEL 195
INSTRUMENT CLUSTER

4
196 UNDERSTANDING YOUR INSTRUMENT PANEL
INSTRUMENT CLUSTER DESCRIPTIONS If jump starting is required, refer to “Jump Starting
Procedures” in “What To Do In Emergencies”.
1. Fuel Gauge / Fuel Door Reminder
When the ignition switch is in the ON/RUN 3. Electronic Throttle Control (ETC) Light
position, the pointer will show the level of fuel This light informs you of a problem with the
remaining in the fuel tank. The fuel pump Electronic Throttle Control (ETC) system. If a
symbol points to the side of the vehicle where problem is detected, the light will come on
the fuel door is located. while the engine is running. Cycle the ignition
key when the vehicle has completely stopped and the
2. Charging System Light
shift lever is placed in the PARK position. The light
This light shows the status of the electrical charg-
should turn off. If the light remains lit with the engine
ing system. The light should come on when the
running, your vehicle will usually be drivable; however,
ignition switch is first turned to ON/RUN and remain on
see an authorized dealer for service as soon as possible. If
briefly as a bulb check. If the light stays on or comes on
the light is flashing when the engine is running, imme-
while driving, turn off some of the vehicle’s non-essential
diate service is required and you may experience reduced
electrical devices or increase engine speed (if at idle). If
performance, an elevated/rough idle or engine stall and
the charging system light remains on, it means that the
your vehicle may require towing. The light will come on
vehicle is experiencing a problem with the charging
when the ignition is first turned to ON/RUN and remain
system. Obtain SERVICE IMMEDIATELY. See an autho-
rized dealer.
 UNDERSTANDING YOUR INSTRUMENT PANEL 197
on briefly as a bulb check. If the light does not come on 6. Speedometer
during starting, have the system checked by an autho- The Speedometer shows the vehicle speed in miles per
rized dealer. hour and/or kilometers per hour (mph/kph).
4. Oil Pressure Warning Light 7. Air Bag Warning Light
This light indicates low engine oil pressure. The This light will turn on for four to eight seconds
light should turn on momentarily when the engine as a bulb check when the ignition switch is first
is started. If the light turns on while driving, stop the turned to ON/RUN. If the light is either not on
vehicle and shut off the engine as soon as possible. A during starting, stays on, or turns on while 4
chime will sound when this light turns on. driving, have the system inspected at an authorized
dealer as soon as possible. Refer to “Occupant Restraints”
Do not operate the vehicle until the cause is corrected.
in “Things To Know Before Starting Your Vehicle” for
This light does not indicate how much oil is in the engine.
further information.
The engine oil level must be checked under the hood.
8. Turn Signal Indicators
5. Low Fuel Light
The arrow will flash with the exterior turn signal
When the fuel level reaches approximately 2.0 gal
when the turn signal lever is operated.
(7.8 L) this light will turn on, and remain on until
fuel is added. If the vehicle is driven more than 1 mile (1.6 km) with
either turn signal on, a continuous chime will sound to
198 UNDERSTANDING YOUR INSTRUMENT PANEL
alert you to turn the signals off. If either indicator flashes If the ABS light is on, the brake system should be serviced
at a rapid rate, check for a defective outside light bulb. as soon as possible to restore the benefits of Anti-Lock
brakes. If the ABS light does not turn on when the
9. High Beam Indicator
ignition switch is turned to the ON/RUN position, have
This indicator shows that the high beam head-
the light inspected by an authorized dealer.
lights are on. Push the multifunction lever forward
to switch the headlights to high beam, and pull toward 11. Seat Belt Reminder Light
yourself (normal position) to return to low beam. When the ignition switch is first turned to ON/
RUN, this light will turn on for four to eight
10. Anti-Lock Brake (ABS) Light
seconds as a bulb check. During the bulb check, if
This light monitors the Anti-Lock Brake System
the driver’s seat belt is unbuckled, a chime will sound.
(ABS). The light will turn on when the ignition
After the bulb check or when driving, if the driver’s seat
switch is turned to the ON/RUN position and
belt remains unbuckled, the Seat Belt Reminder Light
may stay on for as long as four seconds.
will illuminate and the chime will sound. Refer to
If the ABS light remains on or turns on while driving, it “Occupant Restraints” in “Things To Know Before Start-
indicates that the Anti-Lock portion of the brake system ing Your Vehicle” for further information.
is not functioning and that service is required. However,
the conventional brake system will continue to operate
normally if the BRAKE warning light is not on.
 UNDERSTANDING YOUR INSTRUMENT PANEL 199
12. Tachometer normal, turn the engine off immediately and call for
The white area of the scale shows the permissible engine service. Refer to “If Your Engine Overheats” in “What To
revolutions-per-minute (RPM x 1000) for each gear range. Do In Emergencies” for further information.
Before reaching the red area, ease up on the accelerator to
14. Brake Warning Light
prevent engine damage.
This light monitors various brake functions,
13. Engine Temperature Warning Light including brake fluid level and parking brake
This light warns of an overheated engine condi- application. If the brake light turns on it may
tion. As engine coolant temperatures rise and the indicate that the parking brake is applied, that 4
gauge approaches H, this indicator will illuminate the brake fluid level is low, or that there is a problem with
and a single chime will sound after reaching a set the anti-lock brake system reservoir.
threshold. Further overheating will cause the tempera-
If the light remains on when the parking brake has been
ture gauge to pass H, the indicator will continuously
disengaged, and the fluid level is at the full mark on the
flash and a continuous chime will occur until the engine
master cylinder reservoir, it indicates a possible brake
is allowed to cool.
hydraulic system malfunction or that a problem with the
If the light turns on while driving, safely pull over and Brake Booster has been detected by the Anti-Lock Brake
stop the vehicle. If the A/C system is on, turn it off. Also, System (ABS) / Electronic Stability Control (ESC) system.
shift the transmission into NEUTRAL and idle the ve- In this case, the light will remain on until the condition
hicle. If the temperature reading does not return to has been corrected. If the problem is related to the brake
200 UNDERSTANDING YOUR INSTRUMENT PANEL
booster, the ABS pump will run when applying the brake
WARNING!
and a brake pedal pulsation may be felt during each stop.
Driving a vehicle with the red brake light on is
The dual brake system provides a reserve braking capac-
dangerous. Part of the brake system may have failed.
ity in the event of a failure to a portion of the hydraulic
It will take longer to stop the vehicle. You could have
system. A leak in either half of the dual brake system is
a collision. Have the vehicle checked immediately.
indicated by the Brake Warning Light, which will turn on
when the brake fluid level in the master cylinder has
Vehicles equipped with the Anti-Lock Brake System
dropped below a specified level.
(ABS), are also equipped with Electronic Brake Force
The light will remain on until the cause is corrected. Distribution (EBD). In the event of an EBD failure, the
Brake Warning Light will turn on along with the ABS
NOTE: The light may flash momentarily during sharp
Light. Immediate repair to the ABS system is required.
cornering maneuvers, which change fluid level condi-
tions. The vehicle should have service performed, and Operation of the Brake Warning Light can be checked by
the brake fluid level checked. turning the ignition switch from the OFF position to the
ON/RUN position. The light should illuminate for ap-
If brake failure is indicated, immediate repair is neces-
proximately two seconds. The light should then turn off
sary.
unless the parking brake is applied or a brake fault is
detected. If the light does not illuminate, have the light
inspected by an authorized dealer.
 UNDERSTANDING YOUR INSTRUMENT PANEL 201
The light also will turn on when the parking brake is
WARNING!
applied with the ignition switch in the ON/RUN posi-
tion. If the Transmission Temperature Warning Light is
illuminated and you continue operating the vehicle,
NOTE: This light shows only that the parking brake is
in some circumstances you could cause the fluid to
applied. It does not show the degree of brake application.
boil over, come in contact with hot engine or exhaust
15. Transmission Temperature Warning Light components and cause a fire.
This light indicates that the transmission fluid 4
temperature is running hot. This may occur 16. Vehicle Security Light — If Equipped
with severe usage, such as trailer towing. If this This light will flash at a fast rate for approxi-
light turns on, safely pull over and stop them mately 16 seconds, when the vehicle security
vehicle. Then, shift the transmission into NEUTRAL and alarm is arming, and then will flash slowly
run the engine at idle or faster until the light turns off. until the vehicle is disarmed.
17. Temperature Gauge
CAUTION!
The temperature gauge shows engine coolant tempera-
Continuous driving with the Transmission Tempera- ture. Any reading within the normal range indicates that
ture Warning Light illuminated will eventually cause the engine cooling system is operating satisfactorily.
severe transmission damage or transmission failure.
202 UNDERSTANDING YOUR INSTRUMENT PANEL
The gauge pointer will likely indicate a higher tempera-
WARNING!
ture when driving in hot weather, up mountain grades,
or when towing a trailer. It should not be allowed to A hot engine cooling system is dangerous. You or
exceed the upper limits of the normal operating range. others could be badly burned by steam or boiling
coolant. You may want to call an authorized dealer-
CAUTION! ship for service if your vehicle overheats. If you
decide to look under the hood yourself, see “Main-
Driving with a hot engine cooling system could
taining Your Vehicle”. Follow the warnings under the
damage your vehicle. If the temperature gauge reads
Cooling System Pressure Cap paragraph.
“H” pull over and stop the vehicle. Idle the vehicle
with the air conditioner turned off until the pointer
18. Cruise Indicator — If Equipped
drops back into the normal range. If the pointer
This indicator shows that the Electronic Speed
remains on the “H” and you hear continuous chimes,
Control System is ON.
turn the engine off immediately and call an autho-
rized dealership for service. 19. 4WD Indicator — If Equipped
This light indicates the vehicle is in the 4-Wheel Drive
mode.
 UNDERSTANDING YOUR INSTRUMENT PANEL 203
20. Shift Lever Indicator by the vehicle manufacturer on the vehicle placard or tire
The Shift Lever Indicator is self-contained within the inflation pressure label. (If your vehicle has tires of a
instrument cluster. It displays the gear position of the different size than the size indicated on the vehicle
automatic transmission. placard or tire inflation pressure label, you should deter-
mine the proper tire inflation pressure for those tires.)
NOTE: You must apply the brakes before shifting from
PARK. As an added safety feature, your vehicle has been
equipped with a Tire Pressure Monitoring System
21. Odometer/Trip Odometer Reset Button
(TPMS) that illuminates a low tire pressure telltale when 4
Press this button to change the display from odometer to
one or more of your tires is significantly under-inflated.
either of the two trip odometer settings. Trip A or Trip B
Accordingly, when the low tire pressure telltale illumi-
will appear when in the trip odometer mode. Push in and
nates, you should stop and check your tires as soon as
hold the button for two seconds to reset the trip odometer
possible, and inflate them to the proper pressure. Driving
to 0 miles or kilometers. The odometer must be in Trip
on a significantly under-inflated tire causes the tire to
mode to reset.
overheat and can lead to tire failure. Under-inflation also
22. Tire Pressure Monitoring Telltale Light reduces fuel efficiency and tire tread life, and may affect
Each tire, including the spare (if provided), the vehicle’s handling and stopping ability.
should be checked monthly when cold and
inflated to the inflation pressure recommended
204 UNDERSTANDING YOUR INSTRUMENT PANEL
Please note that the TPMS is not a substitute for proper TPMS malfunction telltale after replacing one or more
tire maintenance, and it is the driver’s responsibility to tires or wheels on your vehicle, to ensure that the
maintain correct tire pressure, even if under-inflation has replacement or alternate tires and wheels allow the TPMS
not reached the level to trigger illumination of the TPMS to continue to function properly.
low tire pressure telltale.
CAUTION!
Your vehicle has also been equipped with a TPMS
malfunction indicator to indicate when the system is not The TPMS has been optimized for the original
operating properly. The TPMS malfunction indicator is equipment tires and wheels. TPMS pressures and
combined with the low tire pressure telltale. When the warning have been established for the tire size
system detects a malfunction, the telltale will flash for equipped on your vehicle. Undesirable system opera-
approximately one minute and then remain continuously tion or sensor damage may result when using re-
illuminated. This sequence will continue upon subse- placement equipment that is not of the same size,
quent vehicle start-ups as long as the malfunction exists. type, and/or style. Aftermarket wheels can cause
When the malfunction indicator is illuminated, the sys- sensor damage. Do not use tire sealant from a can or
tem may not be able to detect or signal low tire pressure balance beads if your vehicle is equipped with a
as intended. TPMS malfunctions may occur for a variety TPMS, as damage to the sensors may result.
of reasons, including the installation of replacement or
alternate tires or wheels on the vehicle that prevent the
TPMS from functioning properly. Always check the
 UNDERSTANDING YOUR INSTRUMENT PANEL 205
23. Odometer Display / Trip Odometer Display Area Vehicle Odometer Messages
This display indicates the total distance the vehicle has When the appropriate conditions exist, the following
been driven. odometer messages will display:
NOTE: U.S. Federal regulations require that upon trans-
fer of vehicle ownership, the seller certify to the pur- door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Door Ajar
chaser the correct mileage that the vehicle has been gATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gate Ajar
driven. If your odometer needs to be repaired or serviced, gASCAP . . . . . . . . . . . . . . . . . . . . . . . Fuel Cap Fault
the repair technician should leave the odometer reading LoW tirE. . . . . . . . . . . . . . . . . . . . . Low Tire Pressure 4
the same as it was before the repair or service. If s/he CHANgE OIL. . . . . . . . . . . . . . . Oil Change Required
cannot do so, then the odometer must be set at zero, and HOTOIL . . . . . . . . . . . . . . . Engine Oil Temp Too Hot
a sticker must be placed in the door jamb stating what the NOTE: If the vehicle is equipped with the optional
mileage was before the repair or service. It is a good idea Electronic Vehicle Information Center (EVIC) in the in-
for you to make a record of the odometer reading before strument cluster, all warnings including “Door Ajar”, and
the repair/service, so that you can be sure that it is “Gate Ajar” will only be displayed in the EVIC display.
properly reset, or that the door jamb sticker is accurate if For additional information, refer to “Electronic Vehicle
the odometer must be reset at zero. Information Center — If Equipped”.
206 UNDERSTANDING YOUR INSTRUMENT PANEL
gASCAP Refer to “Engine Oil Overheating” under in “What To Do
If the vehicle diagnostic system determines that the fuel In Emergencies”.
filler cap is loose, improperly installed, or damaged, a CHANgE OIL Message
“gASCAP” message will display in the odometer display Your vehicle is equipped with an engine oil change
area. Tighten the fuel filler cap properly and press the indicator system. The “CHANgE OIL” message will flash
TRIP ODOMETER button to turn off the message. If the in the instrument cluster odometer for approximately
problem continues, the message will appear the next time 12 seconds after a single chime has sounded to indicate
the vehicle is started. the next scheduled oil change interval. The engine oil
A loose, improperly installed, or damaged fuel filler cap change indicator system is duty-cycle based, which
may also turn on the Malfunction Indicator Light (MIL). means the engine oil change interval may fluctuate
dependent upon your personal driving style. Unless
LoW tirE reset, this message will continue to display each time you
When tire pressure is low, the odometer display will turn the ignition switch to the ON/RUN position. To turn
toggle between LoW and tirE for three cycles. off the message temporarily, press and release the Trip
HOTOIL Odometer button on the instrument cluster. To reset the
When this message is displayed there is a engine over- oil change indicator system (after performing the sched-
temperature condition. When this condition occurs, the uled maintenance), refer to the following procedure:
“HOTOIL” message will be displayed in the odometer 1. Turn the ignition switch to the ON/RUN position
along with a chime. (do not start the engine).
 UNDERSTANDING YOUR INSTRUMENT PANEL 207
2. Fully depress the accelerator pedal, slowly, three Certain conditions, such as a loose or missing gas cap,
times within 10 seconds. poor fuel quality, etc., may illuminate the light after
engine start. The vehicle should be serviced if the light
3. Turn the ignition switch to the OFF/LOCK position.
stays on through several of your typical driving cycles. In
NOTE: If the indicator message illuminates when you most situations, the vehicle will drive normally and will
start the engine, the oil change indicator system did not not require towing.
reset. If necessary, repeat this procedure.
CAUTION! 4
24. Malfunction Indicator Light (MIL)
The Malfunction Indicator Light (MIL) is part of Prolonged driving with the MIL on could cause
an Onboard Diagnostic system called OBD II that damage to the engine control system. It also could
monitors emissions, engine, and automatic trans- affect fuel economy and drivability. If the MIL is
mission control systems. The light will illuminate when flashing, severe catalytic converter damage and
the key is in the ON/RUN position before engine start. If power loss will soon occur. Immediate service is
the bulb does not come on when turning the key from required.
OFF to ON/RUN, have the condition checked promptly.
208 UNDERSTANDING YOUR INSTRUMENT PANEL
27. Electronic Stability Control (ESC) Activation/
WARNING!
Malfunction Indicator Light — If Equipped
A malfunctioning catalytic converter, as referenced The “ESC Activation/Malfunction Indicator
above, can reach higher temperatures than in normal Light” in the instrument cluster will come on
operating conditions. This can cause a fire if you when the ignition switch is turned to the
drive slowly or park over flammable substances such ON/RUN position. It should go out with the
as dry plants, wood, cardboard, etc. This could result engine running. If the “ESC Activation/Malfunction In-
in death or serious injury to the driver, occupants or dicator Light” comes on continuously with the engine
others. running, a malfunction has been detected in the ESC
system. If this light remains on after several ignition
25. Front Fog Light Indicator — If Equipped cycles, and the vehicle has been driven several miles
This indicator will illuminate when the front fog (kilometers) at speeds greater than 30 mph (48 km/h), see
lights are on. your authorized dealer as soon as possible to have the
problem diagnosed and corrected.
26. Electronic Stability Control (ESC) OFF Indicator
Light — If Equipped NOTE:
This light indicates the Electronic Stability Con- • The “ESC Off Indicator Light” and the “ESC
trol system (ESC) has been turned off by the Activation/Malfunction Indicator Light” come on mo-
driver. mentarily each time the ignition switch is turned to
ON/RUN.
 UNDERSTANDING YOUR INSTRUMENT PANEL 209
• Each time the ignition is turned to ON/RUN, the ESC 29. Electronic Vehicle Information Center (EVIC)
system will be ON, even if it was turned off previously. Display — If Equipped
When the appropriate conditions exist, this display
• The ESC system will make buzzing or clicking sounds
shows the EVIC messages.
when it is active. This is normal; the sounds will stop
when ESC becomes inactive following the maneuver For further information, refer to “Electronic Vehicle In-
that caused the ESC activation. formation Center (EVIC)”.
28. 4WD! Warning Light — If Equipped 30. Hill Descent Indicator — If Equipped 4
This light monitors the 4-Wheel Drive (4WD) The symbol illuminates (is armed) when the
system. The light will come on, for a bulb 4WD Lock switch is activated and the trans-
check, when the ignition key is turned to the mission range indicator is in LOW or REVERSE
ON/RUN position and may stay on for as long position (Off-Road Mode).
as three seconds.
MINI-TRIP COMPUTER — IF EQUIPPED
When lit solid: There is a 4WD system fault. 4WD The Mini-Trip Computer is located in the instrument
performance will be at a reduced level. Service the 4WD cluster and features a driver-interactive trip information
system soon. and temperature display.
When blinking: The 4WD system is temporarily dis- NOTE: The system will display the last known outside
abled due to overload condition. temperature when starting the vehicle and may need to
210 UNDERSTANDING YOUR INSTRUMENT PANEL
be driven several minutes before the updated tempera- STEP Button
ture is displayed. Engine temperature can also affect the Press the STEP button located on the steering wheel to
displayed temperature; therefore, temperature readings scroll through sub menus (i.e., Temperature, Trip Func-
are not updated when the vehicle is not moving. tions: Odometer, Trip A, Trip B).
Control Buttons RESET Button
To reset the display shown, turn the ignition switch to the
ON position, then press and hold the RESET button
located on the steering wheel.
The following displays can be reset or changed:
• Trip A
• Trip B

Mini-Trip Control Buttons

 UNDERSTANDING YOUR INSTRUMENT PANEL 211
Trip Odometer (ODO) ELECTRONIC VEHICLE INFORMATION CENTER
This display shows the distance traveled since the last (EVIC) — IF EQUIPPED
reset. Press and release the STEP button on the instru- The Electronic Vehicle Information Center (EVIC) fea-
ment cluster to switch from odometer, to Trip A or Trip B. tures a driver-interactive display that is located in the
instrument cluster.
Trip A
Shows the total distance traveled for Trip A since the last
reset.
4
Trip B
Shows the total distance traveled for Trip B since the last
reset.

Electronic Vehicle Information Center (EVIC)

212 UNDERSTANDING YOUR INSTRUMENT PANEL
The EVIC consists of the following: The system allows the driver to select information by
pressing the following buttons mounted on the steering
• System Status
wheel:
• Vehicle Information Warning Message Displays
• Personal Settings (Customer-Programmable Features)
• Compass Heading
• Outside Temperature Display
• Trip Computer Functions
• Uconnect™ phone Displays (if equipped)
• Audio Mode Display
• Tire Pressure Monitor (TPM)
EVIC Steering Wheel Buttons
 UNDERSTANDING YOUR INSTRUMENT PANEL 213
MENU Button DOWN Button
Press and release the MENU button to scroll Press and release the DOWN button to scroll
through the main menus (Fuel Economy, Warn- downward through the sub-menus.
ings, Timer, Units, System, Personal Settings)
or to exit sub-menus.
When the appropriate conditions exist, the EVIC displays
COMPASS Button
the following messages:
Press and release the COMPASS button to
display one of eight compass readings and the • Turn Signal On (with a continuous warning chime 4
outside temperature or to exit sub-menus. after 1 mile (1.6 km) of distance travelled)
• Left Front Turn Signal Lamp Out (with a single chime)
SELECT Button
Press and release the SELECT button for access • Left Rear Turn Signal Lamp Out (with a single chime)
to main menus, sub-menus or to select a per-
• Right Front Turn Signal Lamp Out (with a single
sonal setting in the setup menu.
chime)
• Right Rear Turn Signal Lamp Out (with a single
chime)
• RKE Battery Low (with a single chime)
214 UNDERSTANDING YOUR INSTRUMENT PANEL
• Personal Settings Not Avail. — Vehicle not in PARK • Remote Start Aborted — Fuel Low
(automatic transmission) or vehicle is in motion
• Remote Start Aborted — System Fault
(manual transmission).
• Key In Ignition
• Door Ajar (with vehicle graphic showing which door
is open. A single chime sounds if the vehicle is in • Low Tire
motion).
• Low Tire Pressure Display for Premium TPM System
• Doors Ajar (with vehicle graphic showing which doors
• Service TPM System
are open. A single chime sounds if the vehicle is in
motion). Engine Oil Change Indicator System — If Equipped
• Gate (with vehicle graphic showing the Liftgate open Oil Change Required
and A single chime ) Your vehicle is equipped with an engine oil change
indicator system. The “Oil Change Required” message
• Headlamps or Park Lamps On
will flash in the EVIC display for approximately five
• Remote Start Aborted — Door Ajar seconds after a single chime has sounded, to indicate the
next scheduled oil change interval. The engine oil change
• Remote Start Aborted — Hood Ajar
indicator system is duty-cycle based, which means the
• Remote Start Aborted — L/Gate Ajar engine oil change interval may fluctuate dependent upon
your personal driving style.
 UNDERSTANDING YOUR INSTRUMENT PANEL 215
Unless reset, this message will continue to display each EVIC Functions
time you turn the ignition switch to the ON/RUN
• Compass/Temperature/Audio
position. To turn off the message temporarily, press and
release the Trip Odometer button on the instrument • Average Fuel Economy
cluster. To reset the oil change indicator system (after
• Distance To Empty (DTE)
performing the scheduled maintenance) refer to the fol-
lowing procedure. • Elapsed Time
1. Turn the ignition switch to the ON position. Do not • Tire Pressure Monitor (TPM) 4
start the engine.
• Personal Settings
2. Fully depress the accelerator pedal, slowly, three times
To Reset The Display
within 10 seconds.
Pressing and holding the SELECT button once will clear
3. Turn the ignition switch to the OFF/LOCK position. the function currently being displayed. Reset will only
occur if a resettable function is currently being displayed.
NOTE: If the indicator message illuminates when you
To reset all resettable functions, press and release the
start the vehicle, the oil change indicator system did not
SELECT button a second time within three seconds of
reset. If necessary repeat this procedure.
resetting the currently displayed function. Reset ALL will
be displayed during this three-second window.
216 UNDERSTANDING YOUR INSTRUMENT PANEL
Compass/Temperature/Audio determined by a weighted average of the instantaneous
and average fuel economy, according to the current fuel
Press and release the COMPASS button to display one of
tank level. This is not resettable.
eight compass headings to indicate the direction the
vehicle is facing, the outside temperature, and the current NOTE: Significant changes in driving style or vehicle
radio station. loading will greatly affect the actual drivable distance of
the vehicle, regardless of the DTE displayed value.
For additional information regarding the compass, refer
to Personal Settings (Customer-Programmable Features). When the DTE value is less than 30 miles (48 km)
estimated driving distance, the DTE display will change
Average Fuel Economy
to a text display of ⬙LOW FUEL⬙. This display will
Shows the average fuel economy since the last reset.
continue until the vehicle runs out of fuel. Adding a
When the fuel economy is reset, the display will read
significant amount of fuel to the vehicle will turn off the
“RESET” or show dashes for two seconds. Then, the
⬙LOW FUEL⬙ text and a new DTE value will be dis-
history information will be erased, and the averaging will
played, based on the current values in the DTE calcula-
continue from the last fuel reading before the reset.
tion and the current fuel tank level.
Distance To Empty (DTE)
Tire Pressure Monitor (TPM)
Shows the estimated distance that can be traveled with
Refer to “Starting And Operating”, “Tire Pressure Moni-
the fuel remaining in the tank. This estimated distance is
toring System (TPMS)” for system operation.
 UNDERSTANDING YOUR INSTRUMENT PANEL 217
Elapsed Time Press and release the MENU or DOWN buttons until
Shows the total elapsed time of travel since the last reset. “Personal Settings” is displayed in the EVIC then press
Elapsed time will increment when the ignition switch is the SELECT button.
in the ON/RUN position.
Use the SELECT button to display one of the following
Elapsed time is displayed as follows: choices:
hours:minutes:seconds Language
Elapsed time can be reset by pressing and holding the
When in this display you may select different languages 4
for all display nomenclature, including the trip functions.
SELECT button (as prompted in the EVIC display). Upon
Pressing the SELECT button while in this display selects
reset all digits will change to zeros and time will start
English, Espanol, Deutsch, Italiano, Francais or NL de-
incrementing again if the ignition switch is in RUN or
pending on availability. As you continue, the displayed
START.
information will be shown in the selected language.
Personal Settings
NOTE: Uconnect™ language will not change using the
(Customer-Programmable Features)
EVIC. Please refer to “Language Selection” in Uconnect™
This allows the driver to set and recall features when the
phone — If Equipped for details.
transmission is in PARK (automatic transmission) or the
vehicle is stopped (manual transmission).
218 UNDERSTANDING YOUR INSTRUMENT PANEL
Auto Lock Doors press to unlock the remaining locked doors. When Re-
When ON is selected, all doors lock automatically when mote Unlock All Doors is selected, all of the doors will
the speed of the vehicle reaches 15 mph (24 km/h). Press unlock at the first press of the RKE transmitter UNLOCK
and hold the SELECT button when in this display until button. Press and hold the SELECT button when in this
“ON” or “OFF” appears to make your selection. display until “Driver’s Door 1st” or “All Doors” appears
to make your selection.
Auto Unlock On Exit
When ON is selected, all the vehicle’s doors will unlock Flash Lamps with Lock
when the driver’s door is opened, if the vehicle is When ON is selected, the front and rear turn signals will
stopped (manual transmission) or the vehicle is stopped flash when the doors are locked or unlocked using the
and the transmission is in the PARK or NEUTRAL RKE transmitter. This feature may be selected with or
position (automatic transmission). Press and hold the without the sound horn with lock feature selected. Press
SELECT button when in this display until “ON” or and hold the SELECT button when in this display until
“OFF” appears to make your selection. “ON” or “OFF” appears to make your selection.
RKE Unlock Driver’s Door 1st Sound Horn with Lock
When Driver’s Door 1st is selected only the driver’s door When ON is selected, a short horn sound will occur when
will unlock on the first press of the Remote Keyless Entry the RKE transmitter LOCK button is pressed. This feature
(RKE) transmitter UNLOCK button and require a second may be selected with or without the Flash Lights with
 UNDERSTANDING YOUR INSTRUMENT PANEL 219
Lock feature. Press and hold the SELECT button when in Illuminated Approach
this display until “ON” or “OFF” appears to make your When this feature is selected the headlights will activate
selection. and remain on for up to 90 seconds when the doors are
unlocked using the RKE transmitter. Press and hold the
Headlamp Off Delay
SELECT button when in this display until “OFF”,
When this feature is selected the driver can choose to
“30 sec.”, “60 sec.”, or “90 sec.” appears to make your
have the headlights remain on for 0, 30, 60, or 90 seconds
selection.
when exiting the vehicle. Press and hold the SELECT
button when in this display until 0, 30, 60, or 90 appears Hill Start Assist (HSA) — If Equipped 4
to make your selection. When on is selected, the HSA system is active. Refer to
“Electronic Brake Control System” in “Starting And
Key Off Power Delay
Operating” for system function and operating informa-
When this feature is selected the power window
tion. To make your selection, press and release the
switches, radio, Uconnect™ phone, power sunroof, and
SELECT button until “On” or “Off” appears.
power outlets will remain active for up to 10 minutes
after the ignition switch has been turned OFF. Opening Display Units In
either front vehicle door will cancel this feature. Press The EVIC, odometer, and Uconnect™ gps system units
and hold the SELECT button when in this display until can be changed between English and Metric.
“OFF”, “45 sec.”, “5 min.”, or “10 min.” appears to make
your selection.
220 UNDERSTANDING YOUR INSTRUMENT PANEL
Press and hold the SELECT button when in this display NOTE: A good calibration requires a level surface and
until “ENGLISH” or “METRIC” appears to make your an environment free from large metallic objects such as
selection. buildings, bridges, underground cables, railroad tracks,
etc.
Confirmation of Voice Commands — If Equipped
When ON is selected, all voice commands from the Manual Compass Calibration
Uconnect™ system are confirmed. Press and hold the If the compass appears erratic and the “CAL” indicator
SELECT button when in this display until “ON” or does not appear in the EVIC display, you must put the
“OFF” appears to make your selection. compass into the Calibration Mode manually as follows:
Automatic Compass Calibration 1. Start the engine. Leave the shift lever in PARK in order
This compass is self-calibrating, which eliminates the to enter the EVIC Programming Menus.
need to set the compass manually. When the vehicle is
2. Press the MENU button until the Personal Settings
new, the compass may appear erratic and the EVIC will
(Customer-Programmable Features) menu displays in the
display “CAL” until the compass is calibrated. You may
EVIC.
also calibrate the compass by completing one or more
360–degree turns (in an area free from large metal or 3. Press the DOWN button until “Calibrate Compass”
metallic objects) until the “CAL” message displayed in displays in the EVIC.
the EVIC turns off. The compass will now function
normally.
 UNDERSTANDING YOUR INSTRUMENT PANEL 221
4. Press and release the SELECT button to start the
calibration. The “CAL” indicator will display in the
EVIC.
5. Complete one or more 360–degree turns (in an area
free from large metal or metallic objects) until the “CAL”
indicator turns off. The compass will now function
normally.
4
Compass Variance
Compass Variance is the difference between Magnetic
North and Geographic North. To compensate for the
differences, the variance should be set for the zone where
the vehicle is driven, per the zone map. Once properly Compass Variance Map
set, the compass will automatically compensate for the 1. Turn the ignition switch ON.
differences and provide the most accurate compass head-
2. Press and hold the COMPASS button for approxi-
ing.
mately two seconds.
NOTE: Magnetic materials should be kept away from
the top of the right rear quarter window. This is where
the compass sensor is located.
222 UNDERSTANDING YOUR INSTRUMENT PANEL
3. Press the DOWN button until “Compass Variance”
message and the last variance zone number displays in
the EVIC.
4. Press and release the SELECT button until the proper
variance zone is selected according to the map.
5. Press and release the COMPASS button to exit.

MEDIA CENTER 230 (REQ) — AM/FM STEREO

RADIO AND 6–DISC CD/DVD CHANGER
(MP3/WMA AUX JACK)
NOTE: The radio sales code is located on the lower right
Media Center 230 (REQ)
side of the radio faceplate.
 UNDERSTANDING YOUR INSTRUMENT PANEL 223
Operating Instructions - Radio Mode to seek up and the left switch to seek down. The radio
will remain tuned to the new station until you make
NOTE: The ignition switch must be in the ON or ACC
another selection. Holding either button will bypass
position to operate the radio.
stations without stopping until you release it.
Power Switch/Volume Control (Rotary)
SCAN Button
Push the ON/VOLUME control knob to turn on the
Pressing the SCAN button causes the tuner to search for
radio. Press the ON/VOLUME control knob a second
the next listenable station in AM, FM or Satellite (if
time to turn off the radio.
equipped) frequencies, pausing for five seconds at each 4
Electronic Volume Control listenable station before continuing to the next. To stop
The electronic volume control turns continuously (360 the search, press the SCAN button a second time.
degrees) in either direction without stopping. Turning the
Voice Command Button Uconnect™ Phone — If
ON/VOLUME control knob to the right increases the
Equipped
volume and to the left decreases it.
Press this button to operate the Uconnect™ Phone feature
When the audio system is turned ON, the sound will be (if equipped). Refer to “Voice Command in the Uconnect™
set at the same volume level as last played. User Manual located on the DVD for further details.
SEEK Buttons
Press and release the SEEK buttons to search for the next
listenable station in AM/FM mode. Press the right switch
224 UNDERSTANDING YOUR INSTRUMENT PANEL
If your vehicle is not equipped with or this feature is not Clock Setting Procedure
available on your vehicle, a “Not Equipped With
1. Press and hold the TIME button until the hours blink.
Uconnect Phone” message will display on the radio
screen. 2. Adjust the hours by turning the right side TUNE/
SCROLL control knob.
Phone Button Uconnect™ Phone — If Equipped
Press this button to operate the Uconnect™ Phone feature 3. After adjusting the hours, press the right side TUNE/
(if equipped). Refer to “Uconnect™ Phone” in the SCROLL control knob to set the minutes. The minutes
Uconnect™ User Manual located on the DVD for further will begin to blink.
details.
4. Adjust the minutes using the right side TUNE/
If your vehicle is not equipped with or this feature is not SCROLL control knob. Press the TUNE/SCROLL control
available on your vehicle, a “Not Equipped With knob to save the time change.
Uconnect Phone” message will display on the radio
5. To exit, press any button/knob or wait five seconds.
screen.
The clock can also be set by pressing the SETUP button
TIME Button
and selecting the “SET HOME CLOCK” entry. Once in
Press the TIME button to alternate locations of the time
this display follow the above procedure, starting at
and frequency display.
step 2.
 UNDERSTANDING YOUR INSTRUMENT PANEL 225
INFO Button Push the rotary TUNE/SCROLL control knob a second
Press the INFO button for an RDS station (one with call time and MID will display. Turn the TUNE/SCROLL
letters displayed). The radio will return a Radio Text control knob to the right or left to increase or decrease the
message broadcast from an FM station (FM mode only). mid-range tones.
RW/FF Push the rotary TUNE/SCROLL control knob a third
Pressing the RW (Rewind) or FF (Fast Forward) buttons time and TREBLE will display. Turn the TUNE/SCROLL
causes the tuner to search for the next frequency in the control knob to the right or left to increase or decrease the
direction of the arrows. This feature operates in AM, FM treble tones. 4
or Satellite (if equipped) frequencies.
Push the rotary TUNE/SCROLL control knob a fourth
TUNE Control time and BALANCE will display. Turn the TUNE/
Turn the rotary TUNE/SCROLL control knob clockwise SCROLL control knob to the right or left to adjust the
to increase or counterclockwise to decrease the frequency. sound level from the right or left side speakers.
Setting the Tone, Balance, and Fade Push the rotary TUNE/SCROLL control knob a fifth time
Push the rotary TUNE/SCROLL control knob and BASS and FADE will display. Turn the TUNE/SCROLL control
will display. Turn the TUNE/SCROLL control knob to knob to the left or right to adjust the sound level between
the right or left to increase or decrease the bass tones. the front and rear speakers.
Push the rotary TUNE/SCROLL control knob again to
exit setting tone, balance, and fade.
226 UNDERSTANDING YOUR INSTRUMENT PANEL
MUSIC TYPE Button Program Type 16-Digit Character Display
Pressing this button once will turn on the Music Type Information Inform
mode for five seconds. Pressing the MUSIC TYPE button
Jazz Jazz
or turning the TUNE/SCROLL control knob within five
seconds will allow the program format type to be se- News News
lected. Many radio stations do not currently broadcast Nostalgia Nostalga
Music Type information. Oldies Oldies
Personality Persnlty
Toggle the MUSIC TYPE button to select the following
format types: Public Public
Rhythm and Blues R&B
Program Type 16-Digit Character Display
Religious Music Rel Musc
No program type or
None Religious Talk Rel Talk
undefined
Adult Hits Adlt Hit Rock Rock
Classical Classicl Soft Soft
Classic Rock Cls Rock Soft Rock Soft Rck
College College Soft Rhythm and Blues Soft R & B
Country Country Sports Sports
Foreign Language Language Talk Talk
 UNDERSTANDING YOUR INSTRUMENT PANEL 227

Program Type 16-Digit Character Display • DVD Enter - When the disc is in DVD Menu mode,
Top 40 Top 40 selecting DVD Enter will allow you to play the current
highlighted selection. Use the remote control to scroll
Weather Weather
up and down the menu (if equipped).
By pressing the SEEK button when the Music Type icon
• DISC Play/Pause - You can toggle between
is displayed, the radio will be tuned to the next frequency
playing the DVD and pausing the DVD by
station with the same selected Music Type name. The
pushing the SELECT button (if equipped).
Music Type function only operates when in the FM 4
mode.
• DVD Play Options - Selecting the DVD Play Options
If a preset button is activated while in the Music Type will display the following:
(Program Type) mode, the Music Type mode will be
• Subtitle – Repeatedly pressing SELECT will switch
exited and the radio will tune to the preset station.
subtitles to different subtitle languages that are
SETUP Button available on the disc (if equipped).
Pressing the SETUP button allows you to select between
• Audio Stream – Repeatedly pressing SELECT will
the following items:
switch to different audio languages (if supported on
NOTE: Turn the TUNE/SCROLL control knob to scroll the disc) (if equipped).
through the entries. Push the AUDIO/SELECT button to
select an entry and make changes.
228 UNDERSTANDING YOUR INSTRUMENT PANEL
• Angle – Repeatedly pressing SELECT will change • Set Home Clock - Pressing the SELECT button allows
the viewing angle if supported by the DVD disc (if you to set the clock. Turn the TUNE/SCROLL control
equipped). knob to adjust the hours and then press and turn the
TUNE/SCROLL control knob to adjust the minutes.
NOTE:
Press the TUNE/SCROLL control knob again to save
• The available selections for each of the above entries
changes.
varies depending upon the disc.
• Player Defaults - Selecting this item will allow the
• These selections can only be made while playing a
user to scroll through the following items and set
DVD.
defaults according to customer preference.
• VES™ Power - Allows you to turn VES™ ON and
Menu Language — If Equipped
OFF (if equipped).
Selecting this item will allow the user to choose the
• VES™ Lock - Locks out rear VES™ remote controls (if default startup DVD menu language (effective only if
equipped). language supported by disc). If you want to select a
language not listed, then scroll down and select ⬙other.⬙
• VES™ CH1/CH2 - Allows the user to change the
Enter the four-digit country code using the TUNE/
mode of either the IR1 or IR2 wireless headphones by
SCROLL control knob to scroll up and down to select the
pressing the AUDIO/SELECT button (if equipped).
number and then push to select.
 UNDERSTANDING YOUR INSTRUMENT PANEL 229
Audio Language — If Equipped Subtitles — If Equipped
Selecting this item allows you to choose a default audio Selecting this item allows you to choose between subtitle
language (effective only if the language is supported by Off or On.
the disc). You can select a language not listed by scrolling
Audio DRC — If Equipped
down and selecting ⬙other.⬙ Enter the country code using
Selecting this item allows you to limit maximum audio
the TUNE/SCROLL control knob to scroll up and down
dynamic range. The default is set to ⬙High,⬙ and under
to select the number and then push to select.
this setting, dialogues will play at 11 db higher than if the
Subtitle Language — If Equipped setting is ⬙Normal.⬙ 4
Selecting this item allows you to choose a default subtitle
Aspect Ratio — If Equipped
language (effective only if the language is supported by
Selecting this item allows you to choose between wide
the disc). You can select a language not listed by scrolling
screen, pan scan, and letter box.
down and selecting ⬙other.⬙ Enter the country code using
the TUNE/SCROLL control knob to scroll up and down AutoPlay — If Equipped
to select the number and then push to select. When this is set to On and a DVD video is inserted, it will
bypass the DVD menu screen and automatically play the
movie. In some rare cases, the DVD player may not
auto-play the main title. In such cases, use the MENU
button on the remote control to select desired title to play.
230 UNDERSTANDING YOUR INSTRUMENT PANEL
NOTE: The user will have to set these defaults before You may add a second station to each pushbutton by
loading a disc. If changes are made to these settings after repeating the above procedure with this exception: Press
a disc is loaded, changes will not be effective. Also, the the SET button twice and SET 2 will show in the display
defaults are effective only if the disc supports the window. Each button can be set for SET 1 and SET 2 in
customer-preferred settings. both AM and FM. This allows a total of 12 AM, 12 FM,
and 12 Satellite (if equipped) stations to be stored into
AM and FM Buttons
pushbutton memory. The stations stored in SET 2
Press the buttons to select AM or FM mode.
memory can be selected by pressing the pushbutton
SET Button — To Set the Pushbutton Memory twice.
When you are receiving a station that you wish to
Every time a preset button is used, a corresponding
commit to pushbutton memory, press the SET button.
button number will display.
The symbol SET 1 will now show in the display window.
Select the button (1-6) you wish to lock onto this station Buttons 1 - 6
and press and release that button. If a button is not These buttons tune the radio to the stations that you
selected within five seconds after pressing the SET but- commit to pushbutton memory {12 AM, 12 FM, and 12
ton, the station will continue to play but will not be Satellite (if equipped) stations}.
stored into pushbutton memory.
DISC Button
Pressing the DISC button will allow you to switch from
AM/FM modes to Disc modes.
 UNDERSTANDING YOUR INSTRUMENT PANEL 231
Operation Instructions - (DISC MODE for CD and NOTE: The ignition switch must be in the ON or ACC
MP3/WMA Audio Play, DVD-VIDEO) position to operate the radio.
The radio DVD player and many DVD discs are coded by
LOAD Button — Loading Compact Disc(s)
geographic region. These region codes must match in
Press the LOAD button and the pushbutton with the
order for the disc to play. If the region code for the DVD
corresponding number (1-6) where the CD is being
disc does not match the region code for the radio DVD
loaded. The radio will display PLEASE WAIT and
player, it will not play the disc. Customers may take their
prompt when to INSERT DISC. After the radio displays
vehicle to an authorized dealer to change the region code
⬙INSERT DISC,⬙ insert the CD into the player. 4
of the player a maximum of five times.
Radio display will show ⬙LOADING DISC⬙ when the disc
CAUTION! is loading and “READING DISC” when the radio is
reading the disc.
The radio may shut down during extremely hot
conditions. When this occurs, the radio will indicate CAUTION!
“Disc Hot” and shut off until a safe temperature is
reached. This shutdown is necessary to protect the This CD player will accept 4–3/4 in (12 cm) discs only.
optics of the DVD player and other radio internal The use of other sized discs may damage the CD
components. player mechanism.
232 UNDERSTANDING YOUR INSTRUMENT PANEL
Eject Button — Ejecting Compact Disc(s) SCAN Button (CD MODE)
Press the EJECT button and the pushbutton Press the SCAN button to scan through each track on the
with the corresponding number (1-6) where the CD currently playing.
CD was loaded and the disc will unload and
TIME Button (CD MODE)
move to the entrance for easy removal. Radio
Press this button to change the display from a large CD
display will show ⬙EJECTING DISC⬙ when the disc is
playing time display to a small CD playing time display.
being ejected and prompt the user to remove the disc.
RW/FF (CD MODE)
Press and hold the EJECT button for five seconds and all
Press and hold FF (Fast Forward) and the CD player will
CDs will be ejected from the radio.
begin to fast forward until FF is released, or RW or
The disc can be ejected with the radio and ignition OFF. another CD button is pressed. The RW (Rewind) button
works in a similar manner.
SEEK Button (CD MODE)
Press the right SEEK button for the next selection on the AM or FM Button (CD MODE)
CD. Press the left SEEK button to return to the beginning Switches the radio into the AM or FM radio mode.
of the current selection, or return to the beginning of the
previous selection if the CD is within the first second of
the current selection. Pressing and holding the SEEK
button will allow you to scroll through the tracks faster in
CD and MP3/MWA modes.
 UNDERSTANDING YOUR INSTRUMENT PANEL 233
Notes On Playing MP3/WMA Files The radio uses the following limits for file systems:
The radio can play MP3/WMA files; however, acceptable
• Maximum number of directory levels: 8
MP3/WMA file recording media and formats are limited.
When writing MP3/WMA files, pay attention to the • Maximum number of files: 255
following restrictions.
• Maximum number of folders: 100
Supported Media (Disc Types)
• Maximum number of characters in file/folder names:
The MP3/WMA file recording media supported by the
radio are CDDA, CD-R, CD-RW, MP3,WMA, DVD Video, • Level 1: 12 (including a separator ⬙.⬙ and a three- 4
DVD-R, DVD-RW, DVD+R, DVD+RW, and CDDA+MP3. character extension)
Supported Medium Formats (File Systems) • Level 2: 31 (including a separator ⬙.⬙ and a three-
The medium formats supported by the radio are ISO 9660 character extension)
Level 1 and Level 2 and includes the Joliet extension.
Multisession disc formats are supported by the radio.
When reading discs recorded using formats other than
Multisession discs may contain combinations of normal
ISO 9660 Level 1 and Level 2, the radio may fail to read
CD audio tracks and computer files (including MP3/
files properly and may be unable to play the file nor-
WMA files). Discs created with an option such as ⬙keep
mally. UDF and Apple HFS formats are not supported.
disc open after writing⬙ are most likely multisession
discs. The use of multisession for CD audio or MP3/
WMA playback may result in longer disc loading times.
234 UNDERSTANDING YOUR INSTRUMENT PANEL
If a disc contains multi-formats, such as CD audio and MPEG Sampling Fre-
MP3/WMA tracks, the radio will only play the MP3/ Bit Rate (kbps)
Specification quency (kHz)
WMA tracks on that disc. 320, 256, 224,
Supported MP3/WMA File Formats MPEG-1 Audio 192, 160, 128,
48, 44.1, 32
The radio will recognize only files with the *.MP3/WMA Layer 3 112, 96, 80, 64,
56, 48
extension as MP3/WMA files. Non-MP3/WMA files
named with the *.MP3/WMA extension may cause play- 160, 128, 144,
MPEG-2 Audio
back problems. The radio is designed to recognize the file 24, 22.05, 16 112, 96, 80, 64,
Layer 3
56, 48
as an invalid MP3/WMA and will not play the file.
When using the MP3/WMA encoder to compress audio WMA Sampling Fre-
Bit Rate (kbps)
Specification quency (kHz)
data to an MP3/WMA file, the bit rate and sampling
frequencies in the following table are supported. In 48, 64, 96, 128,
WMA 44.1 and 48
addition, variable bit rates (VBR) are also supported. The 160, 192 VBR
majority of MP3/WMA files use a 44.1 kHz sampling rate ID3 Tag information for artist, song title, and album title
and a 192, 160, 128, 96 or VBR bit rates. are supported for ID3 version 1 tags. ID3 version 2 is not
supported by the radios.
Playlist files are not supported. MP3 Pro files are not
supported.
 UNDERSTANDING YOUR INSTRUMENT PANEL 235
Playback of MP3/WMA Files LIST Button (DISC Mode for MP3/WMA Play)
When a medium containing MP3/WMA data is loaded, Pressing the LIST button will bring up a list of all folders
the radio checks all files on the medium. If the medium on the disc. Scrolling up or down the list is done by
contains a lot of folders or files, the radio will take more
turning the TUNE/SCROLL control knob. Selecting a
time to start playing the MP3/WMA files. folder by pressing the TUNE/SCROLL control knob will
begin playing the files contained in that folder (or the
Loading times for playback of MP3/WMA files may be
next folder in sequence if the selection does not contain
affected by the following:
playable files). 4
• Media - CD-RW media may take longer to load than
The folder list will time out after five seconds.
CD-R media
INFO Button (DISC Mode for MP3/WMA Play)
• Medium formats - Multisession discs may take longer
Pressing the INFO button repeatedly will scroll through
to load than non-multisession discs
the following TAG information: Song Title, Artist, File
• Number of files and folders - Loading times will Name, and Folder Name (if available).
increase with more files and folders
Press the INFO button once more to return to ⬙elapsed
To increase the speed of disc loading, it is recommended time⬙ priority mode.
to use CD-R media and single-session discs. To create a
single-session disc, enable the “Disc at Once” option
before writing to the disc.
236 UNDERSTANDING YOUR INSTRUMENT PANEL
Press and hold the INFO button for three seconds or SEEK Button (Auxiliary Mode)
more and radio will display song titles for each file. No function.
Press and hold the INFO button again for three seconds SCAN Button (Auxiliary Mode)
to return to ⬙elapsed time⬙ display. No function.
Operation Instructions - Auxiliary Mode EJECT Button (Auxiliary Mode)
The auxiliary (AUX) jack is an audio input jack which No function.
allows the user to plug in a portable device such as an
MP3/WMA player, cassette player, or microphone and
utilize the vehicle’s audio system to amplify the source
and play through the vehicle speakers. TIME Button (Auxiliary Mode)
Press the TIME button to change the display from
Pressing the AUX button will change the mode to auxil-
elapsed playing time to time of day. The time of day will
iary device if the AUX jack is connected.
display for five seconds.
NOTE: The AUX device must be turned on and the
RW/FF (Auxiliary Mode)
device’s volume set to the proper level. If the AUX audio
No function.
is not loud enough, turn the device’s volume up. If the
AUX audio sounds distorted, turn the device’s volume SET Button (Auxiliary Mode)
down. No function.
 UNDERSTANDING YOUR INSTRUMENT PANEL 237
Operating Instructions — Voice Command System Macrovision
(If Equipped) This product incorporates copyright protection technol-
For the radio, Refer to “Voice Command” in the ogy that is protected by U.S. patents and other intellec-
Uconnect™ User Manual located on the DVD for further tual property rights. Use of this copyright protection
details. technology must be authorized by Macrovision, and is
intended for home and other limited viewing uses only,
Operating Instructions - Uconnect™ Phone
unless otherwise authorized by Macrovision. Reverse
(If Equipped)
Refer to “Uconnect™ Phone” in the Uconnect™ User
engineering or disassembly is prohibited. 4
Manual located on the DVD for further details. DTS™
⬙DTS™⬙ and ⬙DTS™ 2.0⬙ are trademarks of Digital The-
Operating Instructions - Video Entertainment
ater Systems, Inc.
System (VES)™ (If Equipped)
Refer to “Video Entertainment System (VES)™” for fur- Uconnect™ Multimedia (Satellite Radio) — If
ther details. Equipped
Satellite radio uses direct satellite-to-receiver broadcast-
Dolby威
ing technology to provide clear digital sound, coast to
Manufactured under license from Dolby威 Laboratories.
coast. The subscription service provider is Sirius Satellite
⬙Dolby威⬙ and the double-D symbol are trademarks of
Radio. This service offers over 130 channels of music,
Dolby威 Laboratories.
238 UNDERSTANDING YOUR INSTRUMENT PANEL
sports, news, entertainment, and programming for chil- Electronic Serial Number/Sirius Identification
dren, directly from its satellites and broadcasting studios. Number (ESN/SID)
Please have the following information available when
NOTE: Sirius service is not available in Hawaii and has
calling:
limited coverage in Alaska.
1. The Electronic Serial Number/Sirius Identification
System Activation
Number (ESN/SID).
Sirius Satellite Radio service is pre-activated, and you
may begin listening immediately to the one year of audio 2. Your Vehicle Identification Number.
service that is included with the factory-installed satellite
To access the ESN/SID, refer to the following steps:
radio system in your vehicle. Sirius will supply a wel-
come kit that contains general information, including ESN/SID Access
how to setup your on-line listening account. For further With the ignition switch in the ON/RUN or ACC posi-
information, call the toll-free number 888-539-7474, or tion and the radio on, press the SETUP button and scroll
visit the Sirius web site at www.sirius.com, or at www- using the TUNE/SCROLL control knob until Sirius ID is
.siriuscanada.ca for Canadian residents. selected. Press the TUNE/SCROLL control knob and the
Sirius ID number will display. The Sirius ID number
display will time out in two minutes. Press any button on
the radio to exit this screen.
 UNDERSTANDING YOUR INSTRUMENT PANEL 239
Selecting Uconnect™ Multimedia (Satellite) Mode • Dense tree coverage may interrupt reception in the
Press the SAT button until ⬙SAT⬙ appears in the display. A form of short audio mutes.
CD may remain in the radio while in the Satellite radio
• Driving under wide bridges or along tall buildings can
mode.
cause intermittent reception.
Satellite Antenna
• Placing objects over or too close to the antenna can
To ensure optimum reception, do not place items on the
cause signal blockage.
roof around the rooftop antenna location. Metal objects
placed within the line of sight of the antenna will cause Operating Instructions - Uconnect™ Multimedia 4
decreased performance. Larger luggage items such as (Satellite) Mode
bikes should be placed as far rearward as possible, within
NOTE: The ignition switch must be in the ON/RUN or
the loading design of the rack. Do not place items directly
ACC position to operate the radio.
on or above the antenna.
SEEK Buttons
Reception Quality
Press and release the SEEK buttons to search for the next
Satellite reception may be interrupted due to one of the
channel in Satellite mode. Press the right switch to seek
following reasons:
up and the left switch to seek down. The radio will
• The vehicle is parked in an underground parking remain tuned to the new channel until you make another
structure or under a physical obstacle. selection. Holding either button will bypass channels
without stopping until you release it.
240 UNDERSTANDING YOUR INSTRUMENT PANEL
SCAN Button TUNE Control (Rotary)
Pressing the SCAN button causes the tuner to search for Turn the rotary TUNE/SCROLL control knob clockwise
the next channel, pausing for eight seconds before con- to increase or counterclockwise to decrease the channel.
tinuing to the next. To stop the search, press the SCAN
MUSIC TYPE Button
button a second time.
Pressing this button once will turn on the Music Type
INFO Button mode for five seconds. Pressing the MUSIC TYPE button
Pressing the INFO button will cycle the display informa- or turning the TUNE/SCROLL control knob within five
tion between Artist, Song Title, and Composer (if avail- seconds will allow the program format type to be se-
able). Also, pressing and holding the INFO button for an lected.
additional three seconds will make the radio display the
Toggle the MUSIC TYPE button again to select the music
Song Title all of the time (press and hold again to return
type.
to normal display).
By pressing the SEEK button when the Music Type
RW/FF
function is active, the radio will be tuned to the next
Pressing the RW (Rewind) or FF (Fast Forward) buttons
channel with the same selected Music Type name.
causes the tuner to search for the next channel in the
direction of the arrows. If a preset button is activated while in the Music Type
(Program Type) mode, the Music Type mode will be
exited and the radio will tune to the preset channel.
 UNDERSTANDING YOUR INSTRUMENT PANEL 241
SETUP Button the SET button twice and SET 2 will show in the display
Pressing the SETUP button allows you to select the window. Each button can be set for SET 1 and SET 2. This
following items: allows a total of 12 Satellite channels to be stored into
pushbutton memory. The channels stored in SET 2
• Display Sirius ID number — Press the AUDIO/
memory can be selected by pressing the pushbutton
SELECT button to display the Sirius ID number. This
twice.
number is used to activate, deactivate, or change the
Sirius subscription. Every time a preset button is used, a corresponding
button number will display. 4
SET Button – To Set the Pushbutton Memory
When you are receiving a channel that you wish to Buttons 1 - 6
commit to pushbutton memory, press the SET button. These buttons tune the radio to the channels that you
The symbol SET 1 will now show in the display window. commit to pushbutton memory (12 Satellite stations).
Select the button (1-6) you wish to lock onto this channel
and press and release that button. If a button is not MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/
selected within five seconds after pressing the SET but- RHB) CD/DVD/HDD/NAV — IF EQUIPPED
ton, the channel will continue to play but will not be NOTE: The sales code is located on the lower right side
stored into pushbutton memory. of the unit’s faceplate.
You may add a second channel to each pushbutton by Refer to your Uconnect™ Multimedia RHR, RER, RBZ or
repeating the above procedure with this exception: Press RHB user’s manual for detailed operating instructions.
242 UNDERSTANDING YOUR INSTRUMENT PANEL
Operating Instructions (Voice Command System)
— If Equipped
Refer to “Voice Command” in the Uconnect™ User
Manual located on the DVD for further details.
Operating Instructions (Uconnect™ Phone) — If
Equipped
Refer to “Uconnect™ Phone” in the Uconnect™ User
Manual located on the DVD for further details.

MEDIA CENTER 130 (SALES CODE RES)

NOTE: The radio sales code is located on the lower right
side of the radio faceplate. Media Center 130 (RES)
Operating Instructions — Radio Mode
NOTE: The ignition switch must be in the ON or ACC
position to operate the radio.
 UNDERSTANDING YOUR INSTRUMENT PANEL 243
Power Switch/Volume Control (Rotary) TIME Button
Push the ON/VOLUME control knob to turn on the Press the TIME button to alternate display of the time
radio. Push the ON/VOLUME control knob a second and radio frequency.
time to turn off the radio.
Clock Setting Procedure
Electronic Volume Control
1. Press and hold the TIME button until the hours blink.
The electronic volume control turns continuously (360
degrees) in either direction, without stopping. Turning 2. Adjust the hours by turning the right side TUNE/
the ON/VOLUME control knob to the right increases the SCROLL control knob. 4
volume, and to the left decreases it.
3. After adjusting the hours, press the right side TUNE/
When the audio system is turned on, the sound will be SCROLL control knob to set the minutes. The minutes
set at the same volume level as last played. will begin to blink.
SEEK Buttons 4. Adjust the minutes using the right side TUNE/
Press and release the SEEK buttons to search for the next SCROLL control knob. Press the TUNE/SCROLL control
listenable station in AM/FM mode. Press the right switch knob to save time change.
to seek up and the left switch to seek down. The radio
5. To exit, press any button/knob, or wait five seconds.
will remain tuned to the new station until you make
another selection. Holding either button will bypass
stations without stopping, until you release it.
244 UNDERSTANDING YOUR INSTRUMENT PANEL
RW/FF Push the rotary TUNE/SCROLL control knob a third
Pressing the RW (Rewind) or FF (Fast Forward) buttons time and TREBLE will display. Turn the TUNE/SCROLL
causes the tuner to search for the next frequency in the control knob to the right or left to increase or decrease the
direction of the arrows. This feature operates in either treble tones.
AM or FM frequencies.
Push the rotary TUNE/SCROLL control knob a fourth
TUNE Control time and BALANCE will display. Turn the TUNE/
Turn the rotary TUNE/SCROLL control knob clockwise SCROLL control knob to the right or left to adjust the
to increase or counterclockwise to decrease the frequency. sound level from the right or left side speakers.
Setting the Tone, Balance, and Fade Push the rotary TUNE/SCROLL control knob a fifth time
Push the rotary TUNE/SCROLL control knob and BASS and FADE will display. Turn the TUNE/SCROLL control
will display. Turn the TUNE/SCROLL control knob to knob to the left or right to adjust the sound level between
the right or left to increase or decrease the bass tones. the front and rear speakers.
Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to
time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade.
control knob to the right or left to increase or decrease the
AM/FM Button
mid-range tones.
Press the buttons to select either AM or FM mode.
 UNDERSTANDING YOUR INSTRUMENT PANEL 245
SET/RND Button — To Set the Pushbutton Every time a preset button is used, a corresponding
Memory button number will display.
When you are receiving a station that you wish to
Buttons 1 - 6
commit to pushbutton memory, press the SET/RND
These buttons tune the radio to the stations that you
button. The symbol SET 1 will now show in the display
commit to pushbutton memory (12 AM and 12 FM
window. Select the button (1 to 6) you wish to lock onto
stations).
this station and press and release that button. If a button
is not selected within five seconds after pressing the DISC Button 4
SET/RND button, the station will continue to play but Pressing the DISC button will allow you to switch from
will not be stored into pushbutton memory. AM/FM modes to Disc modes.
You may add a second station to each pushbutton by Operation Instructions — CD MODE For CD And
repeating the above procedure with this exception: Press MP3 Audio Play
the SET/RND button twice and SET 2 will show in the
NOTE:
display window. Each button can be set for SET 1 and
• The ignition switch must be in the ON or ACC
SET 2 in both AM and FM. This allows a total of 12 AM
position to operate the radio.
and 12 FM stations to be stored into pushbutton memory.
The stations stored in SET 2 memory can be selected by
pressing the pushbutton twice.
246 UNDERSTANDING YOUR INSTRUMENT PANEL
• This radio is capable of playing compact discs (CD),
CAUTION!
recordable compact discs (CD-R), rewritable compact
discs (CD-RW), compact discs with MP3 tracks and • This CD player will accept 4-3/4 in (12 cm) discs
multisession compact discs with CD and MP3 tracks. only. The use of other sized discs may damage the
CD player mechanism.
Inserting Compact Disc(s)
Gently insert one CD into the CD player with the CD • Do not use adhesive labels. These labels can peel
label facing up. The CD will automatically be pulled into away and jam the player mechanism.
the CD player and the CD icon will illuminate on the • The RES Media Center is a single CD player. Do
radio display. If a CD does not go into the slot more than not attempt to insert a second CD if one is already
1.0 in (2.5 cm), a disc may already be loaded and must be loaded.
ejected before a new disc can be loaded.
EJECT Button - Ejecting a CD
If you insert a disc with the ignition ON and the radio Press the EJECT button to eject the CD.
ON, the unit will switch from radio to CD mode and
begin to play when you insert the disc. The display will
show the track number, and index time in minutes and If you have ejected a disc and have not removed it within
seconds. Play will begin at the start of track 1. 10 seconds, it will be reloaded. If the CD is not removed,
the radio will reinsert the CD but will not play it.
A disc can be ejected with the radio and ignition OFF.
 UNDERSTANDING YOUR INSTRUMENT PANEL 247
NOTE: Ejecting with the ignition OFF is not allowed on AM/FM Button
convertible or soft-top models (if equipped). Press the button to select either AM or FM mode.
SEEK Button SET/RND Button (Random Play Button)
Press the right SEEK button for the next selection on the Press this button while the CD is playing to activate
CD. Press the left SEEK button to return to the beginning Random Play. This feature plays the selections on the
of the current selection, or return to the beginning of the compact disc in random order to provide an interesting
previous selection if the CD is within the first second of change of pace.
the current selection. Pressing and holding the SEEK 4
Press the right SEEK button to move to the next ran-
button will allow faster scrolling through the tracks in
domly selected track.
CD and MP3 modes.
Press the RND button a second time to stop Random
TIME Button
Play.
Press this button to change the display from a large CD
playing time display to a small CD playing time display. Notes on Playing MP3 Files
The radio can play MP3 files; however, acceptable MP3
RW/FF
file recording media and formats are limited. When
Press and hold the FF (Fast Forward) button and the CD
writing MP3 files, pay attention to the following restric-
player will begin to fast forward until FF is released, or
tions.
RW or another CD button is pressed. The RW (Reverse)
button works in a similar manner.
248 UNDERSTANDING YOUR INSTRUMENT PANEL
Supported Media (Disc Types) a number instead. With a maximum number of files,
The MP3 file recording media supported by the radio are exceeding 20 folders will result in this display. With
CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. 200 files, exceeding 50 folders will result in this
display.)
Supported Medium Formats (File Systems)
The medium formats supported by the radio are ISO 9660 • Maximum number of characters in file/folder names:
Level 1 and Level 2 and includes the Joliet extension.
• Level 1: 12 (including a separator ⬙.⬙ and a three-
When reading discs recorded using formats other than
character extension)
ISO 9660 Level 1 and Level 2, the radio may fail to read
files properly and may be unable to play the file nor- • Level 2: 31 (including a separator ⬙.⬙ and a three-
mally. UDF and Apple HFS formats are not supported. character extension)
The radio uses the following limits for file systems: Multisession disc formats are supported by the radio.
Multisession discs may contain combinations of normal
• Maximum number of folder levels: 8
CD audio tracks and computer files (including MP3 files).
• Maximum number of files: 255 Discs created with an option such as ⬙keep disc open after
writing⬙ are most likely multisession discs. The use of
• Maximum number of folders. (The radio display of file
multisession for CD audio or MP3 playback may result in
names and folder names is limited. For large numbers
longer disc loading times.
of files and/or folders, the radio may be unable to
display the file name and folder name, and will assign
 UNDERSTANDING YOUR INSTRUMENT PANEL 249
Supported MP3 File Formats MPEG Sampling Fre-
The radio will recognize only files with the *.MP3 exten- Bit Rate (kbps)
Specification quency (kHz)
sion as MP3 files. Non-MP3 files named with the *.MP3 320, 256, 224,
extension may cause playback problems. The radio is MPEG-1 Audio 192, 160, 128,
designed to recognize the file as an invalid MP3 and will 48, 44.1, 32
Layer 3 112, 96, 80, 64,
not play the file. 56, 48, 40, 32
When using the MP3 encoder to compress audio data to 160, 128, 144,
an MP3 file, the bit rate and sampling frequencies in the MPEG-2 Audio
24, 22.05, 16
112, 96, 80, 64, 4
Layer 3 56, 48, 40, 32, 24,
following table are supported. In addition, variable bit
16, 8
rates (VBR) are also supported. The majority of MP3 files
use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or ID3 Tag information for artist, song title, and album title
VBR bit rate. are supported for version 1 ID3 tags. ID3 version 2 is not
supported by the radios.
Playlist files are not supported. MP3 Pro files are not
supported.
250 UNDERSTANDING YOUR INSTRUMENT PANEL
Playback of MP3 Files Operation Instructions - Auxiliary Mode
When a medium containing MP3 data is loaded, the The auxiliary (AUX) jack is an audio input jack, which
radio checks all files on the medium. If the medium allows the user to plug in a portable device, such as an
contains a lot of folders or files, the radio will take more MP3 player, or cassette player, and utilize the vehicle’s
time to start playing the MP3 files. audio system to amplify the source and play through the
vehicle speakers.
Loading times for playback of MP3 files may be affected
by the following: Pressing the DISC/AUX button will change the mode to
auxiliary device if the AUX jack is connected.
• Media - CD-RW media may take longer to load than
CD-R media NOTE: The AUX device must be turned on and the
device’s volume set to proper level. If the AUX audio is
• Medium formats - Multisession discs may take longer
not loud enough, turn the device’s volume up. If the AUX
to load than non-multisession discs
audio sounds distorted, turn the device’s volume down.
• Number of files and folders - Loading times will
TIME Button (Auxiliary Mode)
increase with more files and folders
Press this button to change the display to time of day. The
To increase the speed of disc loading, it is recommended time of day will display for five seconds (when ignition is
to use CD-R media and single-session discs. To create a OFF).
single-session disc, enable the “Disc at Once” option
before writing to the disc.
 UNDERSTANDING YOUR INSTRUMENT PANEL 251
MEDIA CENTER 130 WITH SATELLITE RADIO Operating Instructions — Radio Mode
(SALES CODE RES+RSC)
NOTE: The ignition switch must be in the ON or ACC
NOTE: The radio sales code is located on the lower right position to operate the radio.
side of the radio faceplate.
Power Switch/Volume Control (Rotary)
Push the ON/VOLUME control knob to turn on the
radio. Push the ON/VOLUME control knob a second
time to turn off the radio. 4
Electronic Volume Control
The electronic volume control turns continuously (360
degrees) in either direction without stopping. Turning the
ON/VOLUME control knob to the right increases the
volume and to the left decreases it.
When the audio system is turned on, the sound will be
set at the same volume level as last played.
Media Center 130 (RES/RSC) SEEK Buttons
Press and release the SEEK buttons to search for the next
listenable station in AM/FM mode. Press the right switch
252 UNDERSTANDING YOUR INSTRUMENT PANEL
to seek up and the left switch to seek down. The radio Phone Button Uconnect™ Phone — If Equipped
will remain tuned to the new station until you make Press this button to operate the Uconnect™ Phone feature
another selection. Holding either button will bypass (if equipped). Refer to “Uconnect™ Phone” in “Under-
stations without stopping until you release it. standing The Features Of Your Vehicle”.
Voice Command System (Radio) — If Equipped If your vehicle is not equipped with or this feature is not
Refer to “Voice Command” in “Understanding The Fea- available on your vehicle, a “Not Equipped With
tures Of Your Vehicle”. Uconnect Phone” message will display on the radio
screen.
Voice Command Button Uconnect™ Phone — If
Equipped TIME Button
Press this button to operate the Uconnect™ Phone feature Press the TIME button to alternate display of the time
(if equipped). Refer to “Uconnect™ Phone” in “Under- and radio frequency.
standing The Features Of Your Vehicle”.
Clock Setting Procedure
If your vehicle is not equipped with or this feature is not
1. Press and hold the TIME button until the hours blink.
available on your vehicle, a “Not Equipped With
Uconnect Phone” message will display on the radio 2. Adjust the hours by turning the right side TUNE/
screen. SCROLL control knob.
 UNDERSTANDING YOUR INSTRUMENT PANEL 253
3. After adjusting the hours, press the right side TUNE/ INFO Button
SCROLL control knob to set the minutes. The minutes Press the INFO button for an RDS station (one with call
will begin to blink. letters displayed). The radio will return a Radio Text
message broadcast from an FM station (FM mode only).
4. Adjust the minutes using the right side TUNE/
SCROLL control knob. Press the TUNE/SCROLL control RW/FF
knob to save time change. Pressing the RW (Rewind) or FF (Fast Forward) buttons
causes the tuner to search for the next frequency in the
5. To exit, press any button/knob or wait five seconds.
direction of the arrows. This feature operates in either 4
The clock can also be set by pressing the SETUP button. AM or FM frequencies.
For vehicles equipped with satellite radio, press the
TUNE Control
SETUP button, use the TUNE/SCROLL control to select
Turn the rotary TUNE/SCROLL control knob clockwise
SET CLOCK, and then follow the above procedure,
to increase or counterclockwise to decrease the frequency.
starting at Step 2. For vehicles not equipped with satellite
radio, press the SETUP button and then follow the above Setting the Tone, Balance, and Fade
procedure, starting at Step 2. Push the rotary TUNE/SCROLL control knob and BASS
will display. Turn the TUNE/SCROLL control knob to
the right or left to increase or decrease the bass tones.
254 UNDERSTANDING YOUR INSTRUMENT PANEL
Push the rotary TUNE/SCROLL control knob a second MUSIC TYPE Button
time and MID will display. Turn the TUNE/SCROLL Pressing this button once will turn on the Music Type
control knob to the right or left to increase or decrease the mode for five seconds. Pressing the MUSIC TYPE button
mid-range tones. or turning the TUNE/SCROLL control knob within five
seconds will allow the program format type to be se-
Push the rotary TUNE/SCROLL control knob a third
lected. Many radio stations do not currently broadcast
time and TREBLE will display. Turn the TUNE/SCROLL
Music Type information.
control knob to the right or left to increase or decrease the
treble tones. Toggle the MUSIC TYPE button to select the following
format types:
Push the rotary TUNE/SCROLL control knob a fourth
time and BALANCE will display. Turn the TUNE/ Program Type 16-Digit Character Display
SCROLL control knob to the right or left to adjust the No program type or
None
sound level from the right or left side speakers. undefined
Adult Hits Adlt Hit
Push the rotary TUNE/SCROLL control knob a fifth time
and FADE will display. Turn the TUNE/SCROLL control Classical Classicl
knob to the left or right to adjust the sound level between Classic Rock Cls Rock
the front and rear speakers. College College
Push the rotary TUNE/SCROLL control knob again to Country Country
exit setting tone, balance, and fade. Foreign Language Language
 UNDERSTANDING YOUR INSTRUMENT PANEL 255

Program Type 16-Digit Character Display Program Type 16-Digit Character Display
Information Inform Top 40 Top 40
Jazz Jazz Weather Weather
News News By pressing the SEEK button when the Music Type icon
Nostalgia Nostalga is displayed, the radio will be tuned to the next frequency
Oldies Oldies station with the same selected Music Type name. The
Personality Persnlty Music Type function only operates when in the FM 4
Public Public mode.
Rhythm and Blues R&B If a preset button is activated while in the Music Type
Religious Music Rel Musc (Program Type) mode, the Music Type mode will be
Religious Talk Rel Talk exited and the radio will tune to the preset station.
Rock Rock SETUP Button
Soft Soft Pressing the SETUP button allows you to select between
Soft Rock Soft Rck the following items:
Soft Rhythm and Blues Soft R&B
• Set Clock — Pressing the SELECT button will allow
Sports Sports you to set the clock. Adjust the hours by turning the
Talk Talk TUNE/SCROLL control knob. After adjusting the
256 UNDERSTANDING YOUR INSTRUMENT PANEL
hours, press the TUNE/SCROLL control knob to set You may add a second station to each pushbutton by
the minutes. The minutes will begin to blink. Adjust repeating the above procedure with this exception: Press
the minutes using the right side TUNE/SCROLL the SET/RND button twice and SET 2 will show in the
control knob. Press the TUNE/SCROLL control knob display window. Each button can be set for SET 1 and
to save time change. SET 2 in both AM and FM. This allows a total of 12 AM
and 12 FM stations to be stored into pushbutton memory.
AM/FM Button
The stations stored in SET 2 memory can be selected by
Press the button to select either AM or FM mode.
pressing the pushbutton twice.
SET/RND Button — To Set the Pushbutton
Every time a preset button is used, a corresponding
Memory
button number will display.
When you are receiving a station that you wish to
commit to pushbutton memory, press the SET/RND Buttons 1 - 6
button. The symbol SET 1 will now show in the display These buttons tune the radio to the stations that you
window. Select the button (1–6) you wish to lock onto this commit to pushbutton memory (12 AM and 12 FM
station and press and release that button. If a button is stations).
not selected within five seconds after pressing the SET/
DISC/AUX Button
RND button, the station will continue to play but will not
Pressing the DISC/AUX button will allow you to switch
be stored into pushbutton memory.
from AM/FM modes to DISC/AUX mode.
 UNDERSTANDING YOUR INSTRUMENT PANEL 257
Operation Instructions — CD MODE for CD and If you insert a disc with the ignition ON and the radio
MP3 Audio Play ON, the unit will switch from radio to CD mode and
begin to play when you insert the disc. The display will
NOTE:
show the track number, and index time in minutes and
• The ignition switch must be in the ON or ACC
seconds. Play will begin at the start of track 1.
position to operate the radio.
• This radio is capable of playing compact discs (CD), CAUTION!
recordable compact discs (CD-R), rewritable compact
• This CD player will accept 4–3/4 in (12 cm) discs 4
discs (CD-RW), compact discs with MP3 tracks and
only. The use of other sized discs may damage the
multisession compact discs with CD and MP3 tracks.
CD player mechanism.
Inserting Compact Disc(s) • Do not use adhesive labels. These labels can peel
Gently insert one CD into the CD player with the CD away and jam the player mechanism.
label facing up. The CD will automatically be pulled into • The RES Media Center is a single CD player. Do
the CD player and the CD icon will illuminate on the not attempt to insert a second CD if one is already
radio display. If a CD does not go into the slot more than loaded.
1.0 in (2.5 cm), a disc may already be loaded and must be
ejected before a new disc can be loaded. EJECT Button - Ejecting a CD
Press the EJECT button to eject the CD.
258 UNDERSTANDING YOUR INSTRUMENT PANEL
If you have ejected a disc and have not removed it within RW/FF
10 seconds, it will be reloaded. If the CD is not removed, Press and hold FF (Fast Forward) and the CD player will
the radio will reinsert the CD but will not play it. begin to fast forward until FF is released or RW or
another CD button is pressed. The RW (Reverse) button
A disc can be ejected with the radio and ignition OFF.
works in a similar manner.
NOTE: Ejecting with the ignition OFF is not allowed on
AM/FM Button
convertible or soft-top models (if equipped).
Press the button to select either AM or FM mode.
SEEK Button
SET/RND Button (Random Play Button)
Press the right SEEK button for the next selection on the
Press this button while the CD is playing to activate
CD. Press the left SEEK button to return to the beginning
Random Play. This feature plays the selections on the
of the current selection, or return to the beginning of the
compact disc in random order to provide an interesting
previous selection if the CD is within the first second of
change of pace.
the current selection. Pressing and holding the SEEK
button will allow faster scrolling through the tracks in Press the right SEEK button to move to the next ran-
CD and MP3 modes. domly selected track.
TIME Button Press the SET/RND button a second time to stop Ran-
Press this button to change the display from a large CD dom Play.
playing time display to a small CD playing time display.
 UNDERSTANDING YOUR INSTRUMENT PANEL 259
Notes On Playing MP3 Files • Maximum number of folders. (The radio display of file
The radio can play MP3 files; however, acceptable MP3 file names and folder names is limited. For large numbers
recording media and formats are limited. When writing of files and/or folders, the radio may be unable to
MP3 files, pay attention to the following restrictions. display the file name and folder name and will assign
a number instead. With a maximum number of files,
Supported Media (Disc Types)
exceeding 20 folders will result in this display. With
The MP3 file recording media supported by the radio are
200 files, exceeding 50 folders will result in this
CDDA, CD-R, CD-RW, MP3, and CDDA+MP3.
display.) 4
Supported Medium Formats (File Systems)
• Maximum number of characters in file/folder names:
The medium formats supported by the radio are ISO 9660
Level 1 and Level 2 and includes the Joliet extension. • Level 1: 12 (including a separator ⬙.⬙ and a three-
When reading discs recorded using formats other than character extension)
ISO 9660 Level 1 and Level 2, the radio may fail to read
• Level 2: 31 (including a separator ⬙.⬙ and a three-
files properly and may be unable to play the file nor-
character extension)
mally. UDF and Apple HFS formats are not supported.
Multisession disc formats are supported by the radio.
The radio uses the following limits for file systems:
Multisession discs may contain combinations of normal
• Maximum number of folder levels: 8 CD audio tracks and computer files (including MP3 files).
• Maximum number of files: 255
260 UNDERSTANDING YOUR INSTRUMENT PANEL
Discs created with an option such as ⬙keep disc open after MPEG Sampling Fre-
writing⬙ are most likely multisession discs. The use of Bit Rate (kbps)
Specification quency (kHz)
multisession for CD audio or MP3 playback may result in 320, 256, 224,
longer disc loading times. MPEG-1 Audio 192, 160, 128,
48, 44.1, 32
Supported MP3 File Formats Layer 3 112, 96, 80, 64,
56, 48, 40, 32
The radio will recognize only files with the *.MP3 exten-
sion as MP3 files. Non-MP3 files named with the *.MP3 160, 128, 144,
extension may cause playback problems. The radio is MPEG-2 Audio 112, 96, 80, 64,
24, 22.05, 16
Layer 3 56, 48, 40, 32, 24,
designed to recognize the file as an invalid MP3 and will
16, 8
not play the file.
ID3 Tag information for artist, song title, and album title
When using the MP3 encoder to compress audio data to are supported for version 1 ID3 tags. ID3 version 2 is not
an MP3 file, the bit rate and sampling frequencies in the supported by the radios.
following table are supported. In addition, variable bit
rates (VBR) are also supported. The majority of MP3 files Playlist files are not supported. MP3 Pro files are not
use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or supported.
VBR bit rates.
 UNDERSTANDING YOUR INSTRUMENT PANEL 261
Playback of MP3 Files LIST Button (CD Mode for MP3 Play)
When a medium containing MP3 data is loaded, the Pressing the LIST button will bring up a list of all folders
radio checks all files on the medium. If the medium on the disc. Scrolling up or down the list is done by
contains a lot of folders or files, the radio will take more
turning the TUNE/SCROLL control knob. Selecting a
time to start playing the MP3 files. folder by pressing the TUNE/SCROLL control knob will
begin playing the files contained in that folder (or the
Loading times for playback of MP3 files may be affected
next folder in sequence if the selection does not contain
by the following:
playable files). 4
• Media - CD-RW media may take longer to load than
The folder list will time out after five seconds.
CD-R media
INFO Button (CD Mode for MP3 Play)
• Medium formats - Multisession discs may take longer
Pressing the INFO button repeatedly will scroll through
to load than non-multisession discs
the following TAG information: Song Title, Artist, File
• Number of files and folders - Loading times will Name, and Folder Name (if available).
increase with more files and folders
Press the INFO button once more to return to ⬙elapsed
To increase the speed of disc loading, it is recommended time⬙ priority mode.
to use CD-R media and single-session discs. To create a
Press and hold the INFO button for three seconds or
single-session disc, enable the “Disc at Once” option
more and the radio will display song titles for each file.
before writing to the disc.
262 UNDERSTANDING YOUR INSTRUMENT PANEL
Press and hold the INFO button again for three seconds Uconnect™ Multimedia (Satellite Radio) — If
to return to ⬙elapsed time⬙ display. Equipped
Satellite radio uses direct satellite-to-receiver broadcast-
Operation Instructions - Auxiliary Mode
ing technology to provide clear digital sound, coast to
The auxiliary (AUX) jack is an audio input jack which
coast. The subscription service provider is Sirius Satellite
allows the user to plug in a portable device such as an
MP3 player or cassette player and utilize the vehicle’s Radio. This service offers over 130 channels of music,
audio system to amplify the source and play through the sports, news, entertainment, and programming for chil-
vehicle speakers. dren, directly from its satellites and broadcasting studios.
Pressing the AUX button will change the mode to auxil- NOTE: Sirius service is not available in Hawaii and has
iary device if the AUX jack is connected. limited coverage in Alaska.
NOTE: The AUX device must be turned on and the System Activation
device’s volume set to the proper level. If the AUX audio isSirius Satellite Radio service is pre-activated, and you
not loud enough, turn the device’s volume up. If the AUX may begin listening immediately to the one year of audio
audio sounds distorted, turn the device’s volume down. service that is included with the factory-installed satellite
radio system in your vehicle. Sirius will supply a wel-
TIME Button (Auxiliary Mode) come kit that contains general information, including
Press this button to change the display to time of day. The how to setup your on-line listening account. For further
time of day will display for five seconds (when the
ignition is OFF).
 UNDERSTANDING YOUR INSTRUMENT PANEL 263
information, call the toll-free number 888-539-7474, or Sirius ID number will display. The Sirius ID number
visit the Sirius web site at www.sirius.com, or at www- display will time out in two minutes. Press any button on
.siriuscanada.ca for Canadian residents. the radio to exit this screen.
Electronic Serial Number/Sirius Identification Selecting Uconnect™ Multimedia (Satellite) Mode
Number (ESN/SID) Press the SAT button until ⬙SAT⬙ appears in the display. A
Please have the following information available when CD may remain in the radio while in the Satellite radio
calling: mode.
4
1. The Electronic Serial Number/Sirius Identification Satellite Antenna
Number (ESN/SID). To ensure optimum reception, do not place items on the
roof around the rooftop antenna location. Metal objects
2. Your Vehicle Identification Number.
placed within the line of sight of the antenna will cause
To access the ESN/SID, refer to the following steps: decreased performance. Larger luggage items such as
bikes should be placed as far rearward as possible, within
ESN/SID Access
the loading design of the rack. Do not place items directly
With the ignition switch in the ON/RUN or ACC posi-
on or above the antenna.
tion and the radio on, press the SETUP button and scroll
using the TUNE/SCROLL control knob until Sirius ID is
selected. Press the TUNE/SCROLL control knob and the
264 UNDERSTANDING YOUR INSTRUMENT PANEL
Reception Quality SEEK Buttons
Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next
following reasons: channel in Satellite mode. Press the right switch to seek
up and the left switch to seek down. The radio will
• The vehicle is parked in an underground parking
remain tuned to the new channel until you make another
structure or under a physical obstacle.
selection. Holding either button will bypass channels
• Dense tree coverage may interrupt reception in the without stopping until you release it.
form of short audio mutes. SCAN Button
• Driving under wide bridges or along tall buildings can Pressing the SCAN button causes the tuner to search for
cause intermittent reception. the next channel, pausing for eight seconds before con-
tinuing to the next. To stop the search, press the SCAN
• Placing objects over or too close to the antenna can
button a second time.
cause signal blockage.
INFO Button
Operating Instructions - Uconnect™ Multimedia Pressing the INFO button will cycle the display informa-
(Satellite) Mode tion between Artist, Song Title, and Composer (if avail-
NOTE: The ignition switch must be in the ON/RUN or able). Also, pressing and holding the INFO button for an
ACC position to operate the radio. additional three seconds will make the radio display the
Song Title all of the time (press and hold again to return
to normal display).
 UNDERSTANDING YOUR INSTRUMENT PANEL 265
RW/FF By pressing the SEEK button when the Music Type
Pressing the RW (Rewind) or FF (Fast Forward) buttons function is active, the radio will be tuned to the next
causes the tuner to search for the next channel in the channel with the same selected Music Type name.
direction of the arrows.
If a preset button is activated while in the Music Type
TUNE Control (Rotary) (Program Type) mode, the Music Type mode will be
Turn the rotary TUNE/SCROLL control knob clockwise exited and the radio will tune to the preset channel.
to increase or counterclockwise to decrease the channel.
SETUP Button 4
MUSIC TYPE Button Pressing the SETUP button allows you to select the
Pressing this button once will turn on the Music Type following items:
mode for five seconds. Pressing the MUSIC TYPE button
• Display Sirius ID number — Press the AUDIO/
or turning the TUNE/SCROLL control knob within five
SELECT button to display the Sirius ID number. This
seconds will allow the program format type to be se-
number is used to activate, deactivate, or change the
lected.
Sirius subscription.
Toggle the MUSIC TYPE button again to select the music
SET Button – To Set the Pushbutton Memory
type.
When you are receiving a channel that you wish to
commit to pushbutton memory, press the SET button.
The symbol SET 1 will now show in the display window.
266 UNDERSTANDING YOUR INSTRUMENT PANEL
Select the button (1-6) you wish to lock onto this channel Operating Instructions - Uconnect™ Phone
and press and release that button. If a button is not (If Equipped)
selected within five seconds after pressing the SET but- Refer to “Uconnect™ Phone” in “Understanding The
ton, the channel will continue to play but will not be Features Of Your Vehicle”.
stored into pushbutton memory.
iPod姞/USB/MP3 CONTROL — IF EQUIPPED
You may add a second channel to each pushbutton by
repeating the above procedure with this exception: Press NOTE: This section is for sales code RES and REQ/
the SET button twice and SET 2 will show in the display REL/RET radios only with Uconnect™. For sales code
window. Each button can be set for SET 1 and SET 2. This RBZ/RHB, RHR, RHP, RHW or RB2 touch-screen radio
allows a total of 12 Satellite channels to be stored into iPod威/USB/MP3 control feature, refer to the separate
pushbutton memory. The channels stored in SET 2 RBZ/RHB, RHR, RHP, RHW or RB2 User’s Manual.
memory can be selected by pressing the pushbutton iPod威/USB/MP3 control is available only if equipped as
twice. an option with these radios.

Every time a preset button is used, a corresponding This feature allows an iPod威 or external USB device to be
button number will display. plugged into the USB port, located in the center console
or glove compartment.
Buttons 1 - 6
These buttons tune the radio to the channels that you
commit to pushbutton memory (12 Satellite stations).
 UNDERSTANDING YOUR INSTRUMENT PANEL 267
iPod威 control supports Mini, 4G, Photo, Nano, 5G iPod威
and iPhone威 devices. Some iPod威 software versions may
not fully support the iPod威 control features. Please visit
Apple’s website for software updates.
NOTE:
• If the radio has a USB port, refer to the appropriate
Uconnect™ Multimedia radio User’s Manual for
iPod威 or external USB device support capability. 4
• Connecting an iPod威 or consumer electronic audio
device to the AUX port located in the radio faceplate,
plays media, but does not use the iPod威 /MP3 control
feature to control the connected device. USB/AUX Connector Port
Once the audio device is connected and synchronized to
Connecting The iPod姞 Or External USB Device
the vehicle’s iPod威/USB/MP3 control system (iPod威 or
Use the connection cable to connect an iPod威 or external
external USB device may take a few minutes to connect),
USB device to the vehicle’s USB/AUX connector port
the audio device starts charging and is ready for use by
which is located in the center console or glove compart-
pressing radio switches, as described below.
ment.
268 UNDERSTANDING YOUR INSTRUMENT PANEL
NOTE: If the audio device battery is completely dis- Controlling The iPod姞 Or External USB Device
charged, it may not communicate with the iPod威/USB/ Using Radio Buttons
MP3 control system until a minimum charge is attained. To get into the iPod威/USB/MP3 control mode and access
Leaving the audio device connected to the iPod威/USB/ a connected audio device, either press the “AUX” button
MP3 control system may charge it to the required level. on the radio faceplate or press the VR button and say
⬙USB⬙ or ⬙Switch to USB⬙. Once in the iPod威/USB/MP3
Using This Feature
control mode, audio tracks (if available from audio
By using iPod cable or external USB device to connect to
device) start playing over the vehicle’s audio system.
USB port:
Play Mode
• The audio device can be played on the vehicle’s sound
When switched to iPod威/USB/MP3 control mode, the
system, providing metadata (artist, track title, album,
iPod威 or external USB device automatically starts Play
etc.) information on the radio display.
mode. In Play mode, the following buttons on the radio
• The audio device can be controlled using the radio faceplate may be used to control the iPod威 or external
buttons to Play, Browse, and List the iPod威 contents. USB device and display data:
• The audio device battery charges when plugged into • Use the TUNE control knob to select the next or
the USB/AUX connector (if supported by the specific previous track.
audio device)
 UNDERSTANDING YOUR INSTRUMENT PANEL 269
• Turning it clockwise (forward) by one click, while during play mode will jump to the next track in the
playing a track, skips to the next track or press the list, or press the VR button and say ⬙Next or Previous
VR button and say ⬙Next Track⬙. Track⬙.
• Turning it counterclockwise (backward) by one • While a track is playing, press the INFO button to see
click, will jump to the previous track in the list or the associated metadata (artist, track title, album, etc.)
press the VR button and say ⬙Previous Track⬙ for that track. Pressing the INFO button again jumps
to the next screen of data for that track. Once all
• Jump backward in the current track by pressing and 4
screens have been viewed, the last INFO button press
holding the << RW button. Holding the << RW
will go back to the play mode screen on the radio.
button long enough will jump to the beginning of
the current track. • Pressing the REPEAT button will change the audio
device mode to repeat the current playing track or
• Jump forward in the current track by pressing and
press the VR button and say ⬙Repeat ON⬙ or ⬙Repeat
holding the FF >> button.
Off⬙.
• A single press backward << RW or forward FF >> will
• Press the SCAN button to use iPod威/USB/MP3 de-
jump backward or forward respectively, for five
vice scan mode, which will play the first 10 seconds of
seconds.
each track in the current list and then forward to the
• Use the << SEEK and SEEK >> buttons to jump to the next song. To stop SCAN mode and start playing the
previous or next track. Pressing the SEEK >> button desired track, when it is playing the track, press the
270 UNDERSTANDING YOUR INSTRUMENT PANEL
SCAN button again. During Scan mode, pressing the • Turning it clockwise (forward) and counterclock-
<< SEEK and SEEK >> buttons will select the previ- wise (backward) scrolls through the lists, displaying
ous and next tracks. the track detail on the radio display. Once the track
to be played is highlighted on the radio display,
• RND button (available on sales code RES radio only):
press the TUNE control knob to select and start
Pressing this button toggles between Shuffle ON and
playing the track. Turning the TUNE control knob
Shuffle OFF modes for the iPod威 or external USB
fast will scroll through the list faster. During fast
device, or press the VR button and say ⬙Shuffle ON⬙ or
scroll, a slight delay in updating the information on
⬙Shuffle Off⬙. If the RND icon is showing on the radio
the radio display may be noticeable.
display, then the shuffle mode is ON.
• During all List modes, the iPod威 displays all lists in
List Or Browse Mode
“wrap-around” mode. So if the track is at the
During Play mode, pressing any of the buttons described
bottom of the list, just turn the wheel backward
below, will bring up List mode. List mode enables
(counterclockwise) to get to the track faster.
scrolling through the list of menus and tracks on the
audio device. • In List mode, the radio PRESET buttons are used as
shortcuts to the following lists on the iPod威 or
• TUNE control knob: The TUNE control knob functions
external USB device.
in a similar manner as the scroll wheel on the audio
device or external USB device. • Preset 1 – Playlists
 UNDERSTANDING YOUR INSTRUMENT PANEL 271
• Preset 2 – Artists device, then follow the same steps to go to the desired
track in that list. Not all iPod威 or external USB device
• Preset 3 – Albums
sub-menu levels are available on this system.
• Preset 4 – Genres
• MUSIC TYPE button: The MUSIC TYPE button is
• Preset 5 – Audiobooks another shortcut button to the genre listing on your
audio device.
• Preset 6 – Podcasts
• Pressing a PRESET button will display the current CAUTION! 4
list on the top line and the first item in that list on
• Leaving the iPod威 or external USB device (or any
the second line.
supported device) anywhere in the vehicle in
• To exit List mode without selecting a track, press the extreme heat or cold can alter the operation or
same PRESET button again to go back to Play damage the device. Follow the device manufactur-
mode. er’s guidelines.
• LIST button: The LIST button will display the top • Placing items on the iPod威 or external USB device,
level menu of the iPod威 or external USB device. Turn or connections to the iPod威 or external USB device
the TUNE control knob to list the top-menu item to be in the vehicle, can cause damage to the device
selected and press the TUNE control knob. This will and/or to the connectors.
display the next sub-menu list item on the audio
272 UNDERSTANDING YOUR INSTRUMENT PANEL
phone system. Seven devices can be paired to the
WARNING!
Uconnect™ phone system, but just one can be selected
Do not plug in or remove the iPod威 or external USB and played.
device while driving. Failure to follow this warning
Selecting Different Audio Device
could result in an accident.
1. Press PHONE button to begin.
Bluetooth Streaming Audio (BTSA)
2. After the ⬙Ready⬙ prompt and the following beep, say
Music can be streamed from your cellular phone to the
⬙Setup⬙, then ⬙Select Audio Devices⬙.
Uconnect™ phone system.
3. Say the name of the audio device or ask the
Controlling BTSA Using Radio Buttons
Uconnect™ phone system to list audio devices.
To get into the BTSA mode, press either “AUX” button on
the radio or press the VR button and say “Bluetooth Next Track
Streaming Audio”. Use the SEEK UP button, or press the VR button on the
radio and say “Next Track” to jump to the next track
Play Mode
music on your cellular phone.
When switched to BTSA mode, some audio devices can
start playing music over the vehicle’s audio system, but
some devices require the music to be initiated on the
device first, then it will get streamed to the Uconnect™
 UNDERSTANDING YOUR INSTRUMENT PANEL 273
Previous Track
Use the SEEK DOWN button, or press the VR button on
the radio and say “Previous Track” to jump to the
previous track music on your cellular phone.
Browse
Browsing is not available on a BTSA device. Only the
current song that is playing will display info.
4
STEERING WHEEL AUDIO CONTROLS
The remote sound system controls are located on the rear
surface of the steering wheel. Reach behind the wheel to
access the switches.
Remote Sound System Controls
(Back View Of Steering Wheel)
The right-hand control is a rocker-type switch with a
pushbutton in the center and controls the volume and
mode of the sound system. Pressing the top of the rocker
switch will increase the volume, and pressing the bottom
of the rocker switch will decrease the volume.
274 UNDERSTANDING YOUR INSTRUMENT PANEL
Pressing the center button will make the radio switch will go to the beginning of the current track, or to the
between the various modes available. beginning of the previous track if it is within one second
after the current track begins to play.
The left-hand control is a rocker-type switch with a
pushbutton in the center. The function of the left-hand If you press the switch up or down twice, it plays the
control is different depending on which mode you are in. second track; three times, it will play the third, etc.
The following describes the left-hand control operation in The center button on the left side rocker switch has no
each mode. function for a single-disc CD player. However, when a
multiple-disc CD player is equipped on the vehicle, the
Radio Operation
center button will select the next available CD in the
Pressing the top of the switch will “Seek” up for the next
player.
listenable station and pressing the bottom of the switch
will “Seek” down for the next listenable station. CD/DVD DISC MAINTENANCE
The button located in the center of the left-hand control To keep a CD/DVD in good condition, take the following
will tune to the next preset station that you have pro- precautions:
grammed in the radio preset pushbutton. 1. Handle the disc by its edge; avoid touching the
CD Player surface.
Pressing the top of the switch once will go to the next 2. If the disc is stained, clean the surface with a soft cloth,
track on the CD. Pressing the bottom of the switch once wiping from center to edge.
 UNDERSTANDING YOUR INSTRUMENT PANEL 275
3. Do not apply paper or tape to the disc; avoid scratch- RADIO OPERATION AND MOBILE PHONES
ing the disc. Under certain conditions, the mobile phone being on in
your vehicle can cause erratic or noisy performance from
4. Do not use solvents such as benzene, thinner, cleaners,
your radio. This condition may be lessened or eliminated
or anti-static sprays.
by relocating the mobile phone antenna. This condition is
5. Store the disc in its case after playing. not harmful to the radio. If your radio performance does
not satisfactorily “clear” by the repositioning of the
6. Do not expose the disc to direct sunlight.
antenna, it is recommended that the radio volume be 4
7. Do not store the disc where temperatures may become turned down or off during mobile phone operation when
too high. not using Uconnect™ (if equipped).
NOTE: If you experience difficulty in playing a particu- CLIMATE CONTROLS
lar disc, it may be damaged (i.e., scratched, reflective The air conditioning and heating system is designed to
coating removed, a hair, moisture or dew on the disc) make you comfortable in all types of weather.
oversized, or have protection encoding. Try a known
good disc before considering disc player service.
276 UNDERSTANDING YOUR INSTRUMENT PANEL
Manual Heating And Air Conditioning Blower Control
Rotate this control to regulate the
amount of air forced through the ven-
tilation system in any mode. The
blower speed increases as you move
the control to the right from the “O”
(OFF) position. There are seven blower
speeds.
NOTE: For vehicles equipped with Remote Start, the
climate controls will not function during Remote Start
operation if the blower control is left in the “O” (Off)
position.
The Manual Temperature Controls consist of a series of
outer rotary dials and inner push knobs.
 UNDERSTANDING YOUR INSTRUMENT PANEL 277
Temperature Control Mode Control (Air Direction)
Rotate this control to regulate the tem- Rotate this control to choose from sev-
perature of the air inside the passenger eral patterns of air distribution. You
compartment. Rotating the dial left can select either a primary mode as
into the blue area of the scale indicates identified by the symbols on the con-
cooler temperatures, while rotating trol, or a blend of two of these modes.
right into the red area indicates The closer the setting is to a particular
warmer temperatures. symbol, the more air distribution you 4
receive from that mode.
NOTE: If your air conditioning performance seems
lower than expected, check the front of the A/C con- Panel
denser located in front of the radiator for an accumula- Air is directed through the outlets in the instrument
tion of dirt or insects. Clean with a gentle water spray panel. These outlets can be adjusted to direct airflow.
from behind the radiator and through the condenser.
NOTE: The center instrument panel outlets can be
Fabric front fascia protectors may reduce airflow to the
aimed so that they are directed toward the rear seat
condenser, reducing air conditioning performance.
passengers for maximum airflow to the rear.
Bi-Level
Air is directed through the panel and floor outlets.
278 UNDERSTANDING YOUR INSTRUMENT PANEL
NOTE: For all settings, except full cold or full hot, there Defrost
is a difference in temperature between the upper and Air is directed through the windshield and side
lower outlets. The warmer air flows to the floor outlets. window demist outlets. Use this mode with maxi-
This feature gives improved comfort during sunny but mum blower and temperature settings for best wind-
cool conditions. shield and side window defrosting.
Floor NOTE:
Air is directed through the floor outlets with a • The air conditioning compressor operates in Mix,
small amount flowing through the defrost and side Defrost, or a blend of these modes, even if the Air
window demist outlets. Conditioning (A/C) button is not pressed. This dehu-
midifies the air to help dry the windshield. To improve
Mix
fuel economy, use these modes only when necessary.
Air is directed through the floor, defrost, and side
window demist outlets. This setting works best in • For information on operating the Rear Defrost, refer to
cold or snowy conditions that require extra heat to “Rear Window Features” in “Understanding The Fea-
the windshield. This setting is good for maintaining tures Of Your Vehicle”.
comfort while reducing moisture on the windshield.
 UNDERSTANDING YOUR INSTRUMENT PANEL 279
Recirculation Control • The A/C can be deselected manually without disturb-
Pressing the Recirculation Control button will ing the mode control selection.
put the system in recirculation mode. This can
• When the ignition switch is turned to the LOCK
be used when outside conditions such as
position, the recirculation feature will be cancelled.
smoke, odors, dust, or high humidity are pres-
ent. Activating recirculation will cause the LED in the Air Conditioning Control
control button to illuminate. Press this button to engage the Air
NOTE:
Conditioning. A light will illuminate 4
when the Air Conditioning system is
• Continuous use of the Recirculation mode may make
engaged. Rotating the dial left into the
the inside air stuffy and window fogging may occur.
blue area of the scale indicates cooler
Extended use of this mode is not recommended.
temperatures, while rotating right into
• The use of the Recirculation mode in cold or damp the red area indicates warmer tem-
weather will cause windows to fog on the inside, peratures.
because of moisture buildup inside the vehicle. Select
NOTE: The air conditioning compressor will not engage
the outside air position for maximum defogging.
until the engine has been running for about 10 seconds.
• The A/C will engage automatically to prevent fogging
when the recirculation button is pressed and the mode
control is set to panel or panel / floor.
280 UNDERSTANDING YOUR INSTRUMENT PANEL
• MAX A/C
For maximum cooling use the A/C and recirculation
buttons at the same time.
• ECONOMY MODE
If economy mode is desired, press the A/C button to turn
OFF the indicator light and the A/C compressor. Then,
move the temperature control to the desired temperature.
Automatic Temperature Control (ATC) — If
Equipped
The Automatic Temperature Control system automati-
cally maintains the climate in the cabin of the vehicle at
the comfort levels desired by the driver and passenger. Automatic Temperature Control
Automatic Operation
Operation of the system is quite simple.
1. Turn the Mode Control knob (on the right) and the
Blower Control knob (on the left) to AUTO.
 UNDERSTANDING YOUR INSTRUMENT PANEL 281
NOTE: The AUTO position performs best for front seat NOTE:
occupants only. • The temperature setting can be adjusted at anytime
without affecting automatic operation.
2. Dial in the temperature you would
like the system to maintain by rotating • Pressing the Air Conditioning Control button while in
the Temperature Control knob. Once AUTO mode will cause the LED in the control button
the comfort level is selected, the sys- to flash three times and then turn off. This indicates
tem will maintain that level automati- that the system is in AUTO mode and requesting the
cally using the heating system. Should air conditioning is not necessary. 4
the desired comfort level require air
• If your air conditioning performance seems lower than
conditioning, the system will automatically make the
expected, check the front of the A/C condenser located
adjustment.
in front of the radiator for an accumulation of dirt or
You will experience the greatest efficiency by simply insects. Clean with a gentle water spray from behind
allowing the system to function automatically. Selecting the radiator and through the condenser. Fabric front
the “O” (OFF) position on the blower control stops the fascia protectors may reduce airflow to the condenser,
system completely and closes the outside air intake. reducing air conditioning performance.
The recommended setting for maximum comfort for the
average person is 72°F (22°C); however, this may vary.
282 UNDERSTANDING YOUR INSTRUMENT PANEL
Blower Control Mode Preferred Automatic, or Blower and Mode Pre-
For full automatic operation or for ferred Automatic. This means the operator can override
automatic blower operation, turn the the blower, the mode, or both. There is a manual blower
knob to the AUTO position. In manual range for times when the AUTO setting is not desired.
mode there are seven blower speeds The blower can be set to any fixed blower speed by
that can be individual selected. In off rotating the Blower Control knob (on the left).
position the blower will shut off.
NOTE: Please read the Automatic Temperature Control
Operation Chart that follows for details.
Manual Operation
This system offers a full complement of manual override
features, which consist of Blower Preferred Automatic,
UNDERSTANDING YOUR INSTRUMENT PANEL 283
284 UNDERSTANDING YOUR INSTRUMENT PANEL
The operator can override the AUTO mode setting to • Floor
change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a
knob (on the right) to one of the following positions. small amount flowing through the defrost and side
window demist outlets.
• Panel
Air is directed through the outlets in the instrument • Mix
panel. These outlets can be adjusted to direct airflow. Air is directed through the floor, defrost, and side
window demist outlets. This setting works best in
NOTE: The center instrument panel outlets can be
cold or snowy conditions that require extra heat to
aimed so that they are directed toward the rear seat
the windshield. This setting is good for maintaining
passengers for maximum airflow to the rear.
comfort while reducing moisture on the windshield.
• Bi-Level
• Defrost
Air is directed through the panel and floor outlets.
Air is directed through the windshield and side
window demist outlets. Use this mode with maxi-
NOTE: For all settings, except full cold or full hot, there mum blower and temperature settings for best wind-
is a difference in temperature between the upper and shield and side window defrosting.
lower outlets. The warmer air flows to the floor outlets.
This feature gives improved comfort during sunny but
cool conditions.
 UNDERSTANDING YOUR INSTRUMENT PANEL 285
• Air Conditioner Control NOTE:
Press this button to turn on the air • When the ignition switch is turned to the LOCK
conditioning during manual operation position, the recirculation feature will be cancelled.
only. When the air conditioning is • In cold weather, use of the Recirculation mode may
turned on, cool dehumidified air will lead to excessive window fogging. The Recirculation
flow through the outlets selected with mode is not allowed in the floor, defrost, or defrost/
the Mode control dial. Press this but- floor mode in order to improve window clearing.
ton a second time to turn OFF the air Recirculation will be disabled automatically if these 4
conditioning. An LED in the button illuminates when modes are selected.
manual compressor operation is selected.
• Extended use of recirculation may cause the windows
• Recirculation Control to fog. If the interior of the windows begins to fog,
The system will automatically control recircu- press the Recirculation button to return to outside air.
lation. However, pressing the Recirculation Some temp/humidity conditions will cause captured
Control button will put the system in recircu- interior air to condense on windows and hamper
lation mode. This can be used when outside visibility. For this reason, the system will not allow
conditions such as smoke, odors, dust, or high humidity Recirculation to be selected while in floor, defrost, or
are present. Activating recirculation will cause the LED in defrost/floor mode. Attempting to use the recircula-
the control button to illuminate. tion while in these modes will cause the LED in the
control button to blink and then turn off.
286 UNDERSTANDING YOUR INSTRUMENT PANEL
• Most of the time, when in Automatic Operation, you Summer Operation
can temporarily put the system into Recirculation The engine cooling system in air-conditioned vehicles
Mode by pressing the Recirculation button. However, must be protected with a high-quality antifreeze coolant
under certain conditions, while in Automatic Mode, to provide proper corrosion protection and to protect
the system is blowing air out the defrost vents. When against engine overheating. A solution of 50% ethylene
these conditions are present, and the Recirculation glycol antifreeze coolant and 50% water is recommended.
button is pressed, the indicator will flash and then turn Refer to “Maintenance Procedures” in “Maintaining Your
off. This tells you that you are unable to go into Vehicle” for proper coolant selection.
Recirculation Mode at this time. If you would like the
Winter Operation
system to go into Recirculation Mode, you must first
Use of the air Recirculation Mode during winter months is
move the Mode knob to Panel, Bi-Level and then press
not recommended because it may cause window fogging.
the Recirculation button. This feature reduces the
possibility of window fogging. Vacation Storage
Anytime you store your vehicle, or keep it out of service
Operating Tips
(i.e., vacation) for two weeks or more, run the air
NOTE: Refer to the chart at the end of this section for conditioning system at idle for about five minutes in the
suggested control settings for various weather condi- fresh air and high blower settings. This will ensure
tions. adequate system lubrication to minimize the possibility
of compressor damage when the system is started again.
 UNDERSTANDING YOUR INSTRUMENT PANEL 287
Window Fogging Outside Air Intake
Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the
moved by turning the mode selector to Defrost. The windshield, is free of obstructions such as leaves. Leaves
Defrost/Floor mode can be used to maintain a clear collected in the air intake may reduce airflow, and if they
windshield and provide sufficient heating. If side win- enter the plenum, they could plug the water drains. In
dow fogging becomes a problem, increase blower speed. winter months, make sure the air intake is clear of ice,
Vehicle windows tend to fog on the inside in mild but slush, and snow.
rainy or humid weather.
A/C Air Filter — If Equipped 4
NOTE: Recirculate without A/C should not be used for The A/C Filter prevents most dust and pollen from
long periods as fogging may occur. entering the cabin. The filter acts on air coming from
outside the vehicle and recirculated air within the pas-
Side Window Demisters
senger compartment. Refer to “Maintenance Procedures”
A side window demister outlet is located at each end of
in “Maintaining Your Vehicle” for A/C Air Filter service
the instrument panel. These non-adjustable outlets direct
information or see your authorized dealer for service.
air toward the side windows when the system is in the
Refer to “Maintenance Schedules” for filter service
FLOOR, MIX, or DEFROST mode. The air is directed at
intervals.
the area of the windows through which you view the
outside mirrors.
288 UNDERSTANDING YOUR INSTRUMENT PANEL
Control Setting Suggestions for Various Weather Conditions
 STARTING AND OPERATING

CONTENTS
䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 293 䡵 Manual Transmission — If Equipped . . . . . . . . 296
▫ Manual Transmission – If Equipped . . . . . . . 293 ▫ Five–Speed Manual Transmission . . . . . . . . . 296
▫ Automatic Transmission – If Equipped . . . . . 294 ▫ Recommended Shift Speeds . . . . . . . . . . . . . 298 5
▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 294 ▫ Downshifting . . . . . . . . . . . . . . . . . . . . . . . 298
▫ Extreme Cold Weather 䡵 Automatic Transmission — If Equipped . . . . . . 299
(Below –20°F Or ⫺29°C) . . . . . . . . . . . . . . . 295
▫ Key Ignition Park Interlock . . . . . . . . . . . . . 300
▫ If Engine Fails To Start . . . . . . . . . . . . . . . . 295
▫ Brake/Transmission Shift Interlock System . . 300
▫ After Starting . . . . . . . . . . . . . . . . . . . . . . . 295
▫ Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . 301
䡵 Engine Block Heater — If Equipped . . . . . . . . 296
290 STARTING AND OPERATING
䡵 AutoStick威 . . . . . . . . . . . . . . . . . . . . . . . . . . 306 ▫ Brake Assist System (BAS) . . . . . . . . . . . . . . 317
▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . 306 ▫ Electronic Roll Mitigation (ERM) . . . . . . . . . 318
▫ General Information . . . . . . . . . . . . . . . . . . 307 ▫ Hill Descent Control (HDC) – If Equipped . . 319
䡵 Four-Wheel Drive Operation — If Equipped . . 307 ▫ Hill Start Assist (HSA) – Manual
Transmission Only . . . . . . . . . . . . . . . . . . . 320
䡵 On-Road Driving Tips . . . . . . . . . . . . . . . . . . 308
▫ Electronic Stability Control (ESC) . . . . . . . . . 322
䡵 Power Steering . . . . . . . . . . . . . . . . . . . . . . . 308
▫ ESC Activation/Malfunction Indicator Light
▫ Power Steering Fluid Check . . . . . . . . . . . . . 309
And ESC Off Indicator Light . . . . . . . . . . . . 325
䡵 Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . 310
䡵 Tire Safety Information . . . . . . . . . . . . . . . . . 326
䡵 Brake System . . . . . . . . . . . . . . . . . . . . . . . . 313
▫ Tire Markings . . . . . . . . . . . . . . . . . . . . . . . 326
▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . 314
▫ Tire Identification Number (TIN) . . . . . . . . . 330
䡵 Electronic Brake Control System . . . . . . . . . . . 316
▫ Tire Terminology And Definitions . . . . . . . . . 331
▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . 316
▫ Tire Loading And Tire Pressure . . . . . . . . . . 332
▫ Traction Control System (TCS) . . . . . . . . . . . 316
 STARTING AND OPERATING 291
䡵 Tires — General Information . . . . . . . . . . . . . 336 ▫ Replacement Tires . . . . . . . . . . . . . . . . . . . . 344
▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . 336 䡵 Tire Chains . . . . . . . . . . . . . . . . . . . . . . . . . . 346
▫ Tire Inflation Pressures . . . . . . . . . . . . . . . . 337 䡵 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 346
▫ Tire Pressures For High Speed Operation . . . 339 䡵 Tire Rotation Recommendations . . . . . . . . . . . 346
▫ Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . 339 䡵 Tire Pressure Monitoring System (TPMS) . . . . . 348
▫ Spare Tire Matching Original Equipped Tire ▫ Base System . . . . . . . . . . . . . . . . . . . . . . . . 350
And Wheel – If Equipped . . . . . . . . . . . . . . 339
▫ Premium System – If Equipped . . . . . . . . . . 352 5
▫ Compact Spare Tire – If Equipped . . . . . . . . 340
▫ General Information . . . . . . . . . . . . . . . . . . 356
▫ Full Size Spare – If Equipped . . . . . . . . . . . . 341
䡵 Fuel Requirements . . . . . . . . . . . . . . . . . . . . . 357
▫ Limited-Use Spare – If Equipped . . . . . . . . . 341
▫ 2.0L And 2.4L Engine . . . . . . . . . . . . . . . . . 357
▫ Tire Spinning . . . . . . . . . . . . . . . . . . . . . . . 342
▫ Reformulated Gasoline . . . . . . . . . . . . . . . . 357
▫ Tread Wear Indicators . . . . . . . . . . . . . . . . . 342
▫ Gasoline/Oxygenate Blends . . . . . . . . . . . . . 358
▫ Life Of Tire . . . . . . . . . . . . . . . . . . . . . . . . 343
▫ E-85 Usage In Non-Flex Fuel Vehicles . . . . . . 358
292 STARTING AND OPERATING
▫ MMT In Gasoline . . . . . . . . . . . . . . . . . . . . 359 䡵 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . 365
▫ Materials Added To Fuel . . . . . . . . . . . . . . . 359 ▫ Common Towing Definitions . . . . . . . . . . . . 365
▫ Fuel System Cautions . . . . . . . . . . . . . . . . . 359 ▫ Trailer Hitch Classification . . . . . . . . . . . . . . 368
▫ Carbon Monoxide Warnings . . . . . . . . . . . . 360 ▫ Trailer Towing Weights
(Maximum Trailer Weight Ratings) . . . . . . . . 369
䡵 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 361
▫ Trailer And Tongue Weight . . . . . . . . . . . . . 370
▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . . 361
▫ Towing Requirements . . . . . . . . . . . . . . . . . 371
▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 363
▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . 376
䡵 Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . 363
䡵 Recreational Towing
▫ Vehicle Certification Label . . . . . . . . . . . . . . 363
(Behind Motorhome, Etc.) . . . . . . . . . . . . . . . . 377
 STARTING AND OPERATING 293
STARTING PROCEDURES
WARNING! (Continued)
Before starting your vehicle, adjust your seat, adjust both
inside and outside mirrors, and fasten your seat belts. • Do not leave the key fob in or near the vehicle. A
child could operate power windows, other con-
WARNING! trols, or move the vehicle.

• Before exiting a vehicle, always apply the parking Manual Transmission – If Equipped
brake, shift the transmission into PARK, and re- Before starting the engine fully apply the parking brake,
move the key fob from the ignition. When leaving press the clutch pedal to the floor, and place the shift
the vehicle, always lock your vehicle. lever in NEUTRAL.
• Never leave children alone in a vehicle, or with
5
NOTE:
access to an unlocked vehicle.
• The engine will not start unless the clutch pedal is
• Allowing children to be in a vehicle unattended is
pressed to the floor.
dangerous for a number of reasons. A child or
others could be seriously or fatally injured. Chil- • If the key will not turn and the steering wheel is
dren should be warned not to touch the parking locked, rotate the wheel in either direction to relieve
brake, brake pedal or the shift lever. pressure on the locking mechanism and then turn the
key.
(Continued)
294 STARTING AND OPERATING
Automatic Transmission – If Equipped Simply turn the ignition switch to the START position
The shift lever must be in the PARK or NEUTRAL and release when the engine starts. If the engine fails to
position before you can start the engine. Apply the brakes start within 15 seconds, turn the ignition switch to the
before shifting to any driving gear. OFF position, wait 10 to 15 seconds, then repeat the
“Normal Starting” procedure.
NOTE: You must press the brake pedal before shifting
out of PARK.
WARNING!
Tip Start
Do not attempt to push or tow your vehicle to get it
Do not press the accelerator. Turn the ignition switch to
started. Vehicles equipped with an automatic trans-
the START position and release it as soon as the starter
mission cannot be started this way. Unburned fuel
engages. The starter motor will continue to run, and it
could enter the catalytic converter and once the
will disengage automatically when the engine is running.
engine has started, ignite and damage the converter
If the engine fails to start, the starter will disengage
and vehicle. If the vehicle has a discharged battery,
automatically in 10 seconds. If this occurs, turn the
booster cables may be used to obtain a start from
ignition switch to the LOCK position, wait 10 to 15 sec-
another vehicle. This type of start can be dangerous if
onds, then repeat the “Normal Starting” procedure.
done improperly, so follow the procedure carefully.
Normal Starting Refer to “Jump Starting” in “What To Do In Emer-
Normal starting of either a cold or a warm engine does gencies” for further information.
not require pumping or pressing the accelerator pedal.
 STARTING AND OPERATING 295
Extreme Cold Weather (Below –20°F or ⫺29°C)
WARNING!
To ensure reliable starting at these temperatures, use of
an externally powered electric engine block heater (avail- Never pour fuel or other flammable liquid into the
able from your authorized dealer) is recommended. throttle body air inlet opening in an attempt to start
the vehicle. This could result in flash fire causing
If Engine Fails To Start
serious personal injury.
If the engine fails to start after you have followed the
“Normal Starting” and “Extreme Cold Weather” proce-
dures, it may be flooded. Push the accelerator pedal all CAUTION!
the way to the floor and hold it there. Crank the engine
for no more than 15 seconds. This should clear any excess To prevent damage to the starter, do not crank the 5
fuel in case the engine is flooded. Leave the ignition key engine for more than 15 seconds at a time. Wait 10 to
in the ON position, release the accelerator pedal and 15 seconds before trying again.
repeat the “Normal Starting” procedure.
After Starting
The idle speed will automatically decrease as the engine
warms up.
296 STARTING AND OPERATING
ENGINE BLOCK HEATER — IF EQUIPPED MANUAL TRANSMISSION — IF EQUIPPED
The engine block heater warms the engine, and permits
Five–Speed Manual Transmission
quicker starts in cold weather. Connect the cord to a
standard 110-115 Volt AC electrical outlet with a
WARNING!
grounded, three-wire extension cord.
You or others could be injured if you leave the
The engine block heater must be plugged in at least one
vehicle unattended without having the parking
hour to have an adequate warming effect on the engine.
brake fully applied. The parking brake should al-
WARNING! ways be applied when the driver is not in the vehicle,
especially on an incline.
Remember to disconnect the engine block heater
cord before driving. Damage to the 110-115 Volt Fully press the clutch pedal before you shift gears. As you
electrical cord could cause electrocution. release the clutch pedal, lightly press the accelerator
pedal.
 STARTING AND OPERATING 297
For most city driving, you will find it easier to use only
the lower gears. For steady highway driving with light
accelerations, fifth gear is recommended.
Never drive with your foot resting on the clutch pedal,
and never try to hold the vehicle on a hill with the clutch
pedal partially engaged. This will cause abnormal wear
on the clutch.
Never shift into REVERSE until the vehicle has come to a
complete stop. 5
NOTE: During cold weather, until the transmission
Shift Pattern lubricant is warm, you may experience slightly higher
shift efforts. This is normal and not harmful to the
Use each gear in numerical order, do not skip a gear. Be
transmission.
sure the transmission is in first gear, (not third), when
starting from a standing position. Damage to the clutch
can result from starting in third gear.
298 STARTING AND OPERATING
Recommended Shift Speeds Downshifting
To use your manual transmission for optimal fuel Proper downshifting will improve fuel economy and
economy, it should be upshifted as listed in the following prolong engine life.
table.
Manual Transmission Recommended Shift Speeds CAUTION!
Units in mph (km/h) If you skip more than one gear while downshifting
Accel- or downshift at too high a vehicle speed, you could
Engine
eration 1 to 2 2 to 3 3 to 4 4 to 5 damage the engine, transmission, or clutch.
Size
Rate
All Accel 14 (23) 23 (37) 29 (47) 45 (72) To maintain a safe speed and prolong brake life, shift
Engines Cruise 12 (19) 18 (29) 25 (40) 32 (52) down to second or first gear when descending a steep
grade.
When turning a corner or driving up a steep grade,
downshift early so that the engine will not be
overburdened.
 STARTING AND OPERATING 299
AUTOMATIC TRANSMISSION — IF EQUIPPED
WARNING!
CAUTION! • Unintended movement of a vehicle could injure
those in or near the vehicle. As with all vehicles,
Damage to the transmission may occur if the follow-
you should never exit a vehicle while the engine is
ing precautions are not observed:
running.
• Shift into PARK only after the vehicle has come to
• Before exiting a vehicle, always apply the parking
a complete stop.
brake, shift the transmission into PARK, and re-
• Shift into or out of REVERSE only after the
move the key fob from the ignition. When leaving
vehicle has come to a complete stop and the engine 5
the vehicle, always lock your vehicle.
is at idle speed.
• Never leave children alone in a vehicle, or with
• Do not shift between PARK, REVERSE, NEU-
access to an unlocked vehicle.
TRAL, or DRIVE when the engine is above idle
• Allowing children to be in a vehicle unattended is
speed.
dangerous for a number of reasons. A child or
• Before shifting into any gear, make sure your foot
others could be seriously or fatally injured. Chil-
is firmly pressing the brake pedal.
dren should be warned not to touch the parking
brake, brake pedal or the shift lever.
NOTE: You must press and hold the brake pedal while
shifting out of PARK. (Continued)
300 STARTING AND OPERATING
Brake/Transmission Shift Interlock System
WARNING! (Continued)
This vehicle is equipped with a Brake Transmission Shift
• Do not leave the key fob in or near the vehicle. A Interlock (BTSI) that holds the shift lever in the PARK
child could operate power windows, other con- position unless the brakes are applied. To move the shift
trols, or move the vehicle. lever out of the PARK position, the ignition switch must
be turned to the ON/RUN or START position (engine
Key Ignition Park Interlock running or not) and the brake pedal must be pressed.
This vehicle is equipped with a Key Ignition Park Inter-
lock which requires the shift lever to be placed in PARK The shift lever position display (located in the instrument
before the ignition switch can be turned to the LOCK/ panel cluster) indicates the transmission gear range. You
OFF position. The key fob can only be removed from the must press the brake pedal to move the shift lever out of
ignition when the ignition is in the LOCK/OFF position, the PARK position (refer to “Brake/Transmission Shift
and once removed, the shift lever is locked in PARK. Interlock System” in this section). To drive, move the shift
lever from PARK or NEUTRAL to the DRIVE position.
NOTE: The Continuously Variable Automatic Transmis-
sion (CVT) changes ratios in a continuous manner. This
may sometimes ⬙feel⬙ as if it is slipping, but this is normal
and does not harm anything.
 STARTING AND OPERATING 301
Shifting from DRIVE to PARK or REVERSE should be
done only after the accelerator pedal is released and the
vehicle is stopped. Be sure to keep your foot on the brake
pedal when moving the shift lever between these gears.
The transmission shift lever has PARK, REVERSE, NEU-
TRAL, and DRIVE shift positions. Some models include a
LOW position; in others, manual shifts are made using
the AutoStick威 shift control (refer to “AutoStick威” in this
section). Moving the shift lever to the left or right (-/+)
while in the DRIVE position (if equipped with 5
AutoStick威) will manually select from a set of predefined
transmission gear ratios, and will display the current Shift Lever
gear in the instrument cluster as 6, 5, 4, 3, 2, 1.
PARK
Gear Ranges This range supplements the parking brake by locking the
DO NOT race the engine when shifting from PARK or transmission. The engine can be started in this range.
NEUTRAL into another gear range. Never attempt to use PARK while the vehicle is in
motion. Apply the parking brake when leaving the
vehicle in this range.
302 STARTING AND OPERATING
When parking on a level surface, you may place the shift
WARNING! (Continued)
lever in the PARK position first, and then apply the
parking brake. • Your vehicle could move and injure you and others
if it is not completely in PARK. Check by trying to
When parking on a hill, apply the parking brake before move the shift lever rearward (with the brake
placing the shift lever in PARK, otherwise the load on the pedal released) after you have placed it in PARK.
transmission locking mechanism may make it difficult to Make sure the transmission is in PARK before
move the shift lever out of PARK. As an added precau- leaving the vehicle.
tion, turn the front wheels toward the curb on a downhill • It is dangerous to move the shift lever out of PARK
grade and away from the curb on an uphill grade. or NEUTRAL if the engine speed is higher than
idle speed. If your foot is not firmly pressing the
WARNING! brake pedal, the vehicle could accelerate quickly
• Never use the PARK position as a substitute for forward or in reverse. You could lose control of the
the parking brake. Always apply the parking vehicle and hit someone or something. Only shift
brake fully when parked to guard against vehicle into gear when the engine is idling normally and
movement and possible injury or damage. your foot is firmly pressing the brake pedal.
(Continued) (Continued)
 STARTING AND OPERATING 303

WARNING! (Continued) WARNING! (Continued)

• Unintended movement of a vehicle could injure • Allowing children to be in a vehicle unattended is
those in or near the vehicle. As with all vehicles, dangerous for a number of reasons. A child or
you should never exit a vehicle while the engine is others could be seriously or fatally injured. Chil-
running. Before exiting a vehicle, always apply the dren should be warned not to touch the parking
parking brake, shift the transmission into PARK, brake, brake pedal or the shift lever.
and remove the ignition key. Once the key is • Do not leave the key fob in or near the vehicle. A
removed, the shift lever is locked in the PARK child could operate power windows, other con-
position, securing the vehicle against unwanted trols, or move the vehicle. 5
movement.
• Before exiting a vehicle, always apply the parking
CAUTION!
brake, shift the transmission into PARK, and re-
move the key fob from the ignition. When leaving • Before moving the shift lever out of PARK, you
the vehicle, always lock your vehicle. must turn the ignition switch from the LOCK/OFF
• Never leave children alone in a vehicle, or with position to the ON/RUN position, and also press
access to an unlocked vehicle. the brake pedal. Otherwise, damage to the shift
lever could result.
(Continued)
(Continued)
304 STARTING AND OPERATING
REVERSE
CAUTION! (Continued)
This range is for moving the vehicle backward. Shift into
• DO NOT race the engine when shifting from REVERSE only after the vehicle has come to a complete
PARK or NEUTRAL into another gear range, as stop.
this can damage the drivetrain.
NEUTRAL
The following indicators should be used to ensure that Use this range when the vehicle is standing for prolonged
you have engaged the shift lever into the PARK position: periods with the engine running. The engine may be
started in this range. Set the parking brake and shift the
• When shifting into PARK, move the shift lever all the transmission into PARK if you must leave the vehicle.
way forward and to the left until it stops and is fully
seated. WARNING!
• Look at the shift lever position display and verify that Do not coast in NEUTRAL and never turn off the
it indicates the PARK position. ignition to coast down a hill. These are unsafe
• With brake pedal released, verify that the shift lever practices that limit your response to changing traffic
will not move out of PARK. or road conditions. You might lose control of the
vehicle and have a collision.
 STARTING AND OPERATING 305
using a lower gear will improve performance and extend
CAUTION!
transmission life by reducing excessive shifting and heat
Towing the vehicle, coasting, or driving for any other buildup.
reason with the transmission in NEUTRAL can result
During sustained high speed driving or trailer towing up
in severe transmission damage. Refer to “Recre-
long grades on hot days, the automatic transmission oil
ational Towing” in “Starting And Operating” and
may become too hot. If this happens, the transmission
“Towing A Disabled Vehicle” in What To Do In
overheat indicator light will come on, and the vehicle will
Emergencies” for further information.
slow slightly until the transmission cools down enough
to allow a return to the requested speed. This is done to
DRIVE
prevent transmission damage due to overheating. If the 5
This range should be used for most city and highway
high speed is maintained, the overheating may reoccur,
driving. It provides the best fuel economy. The DRIVE
as before, in a cyclic fashion.
position provides optimum driving characteristics under
all normal operating conditions. LOW – IF EQUIPPED
This range should be used for engine braking when
When frequent transmission shifting occurs (such as
descending very steep grades. In this range, the trans-
when operating the vehicle under heavy loading condi-
mission will downshift for maximum engine braking,
tions, in hilly terrain, traveling into strong head winds, or
and upshifts will occur only to prevent engine overspeed.
while towing heavy trailers), use the AutoStick威 mode (if
equipped) to select a lower gear. Under these conditions,
306 STARTING AND OPERATING
AUTOSTICK姞 lever to the (+) side will activate AutoStick威 and shift up
AutoStick威 is a driver-interactive transmission that offers to the next higher manual ratio, unless you are already
six manual ratio changes to provide you with more operating in or near Overdrive, in which case sixth gear
control. AutoStick威 allows you to maximize engine brak- ratio will be selected. In like manner, moving the shift
ing, eliminate undesirable upshifts and downshifts, and lever to (-) will activate AutoStick威 and shift to the next
improve overall vehicle performance. This system can lower manual ratio. After AutoStick威 is activated, the
also provide you with more control during passing, city manual ratio selected is displayed in the transmission
driving, cold slippery conditions, mountain driving, ratio display and tipping the shift lever to the (+) or (-)
trailer towing, and many other situations. Automatic ratio direction will cause an upshift or downshift by one ratio.
changes upward will only occur to protect the Continu-
AutoStick威 Is Deactivated:
ously Variable Automatic Transmission (CVT) and/or the
engine from overspeed. Changes down will only happen • By holding the shift lever to (+) momentarily
at minimum engine speed to prevent stalling.
• When the shift lever is shifted out of DRIVE
Operation
• When in sixth position, by touching the shift lever to
NOTE: AutoStick威 is not available until the CVT warms the right
up in cold weather.
• When heavy Anti-Lock Brake System (ABS) applica-
AutoStick威 operation is activated in the DRIVE position tion is detected
by moving the shift lever side-to-side. Moving the shift
 STARTING AND OPERATING 307
General Information FOUR-WHEEL DRIVE OPERATION — IF
EQUIPPED
• If a ratio other than first is selected and the vehicle is
This feature provides full time, on-demand, four–wheel
brought to a stop, the transmission control logic will
drive (4WD).
automatically select the first gear ratio.
• If a low range is selected and the engine accelerates to
the rev limit, the transmission will automatically select
the next higher ratio.
• If a downshift would cause the engine to overspeed,
that shift will not occur until it is safe for the engine. 5
• If the system detects powertrain overheating, the
transmission will revert to the automatic shift mode
and remain in that mode until the powertrain cools off.
• If the system detects a problem, it will disable the
AutoStick威 mode and the transmission will return to
Four-Wheel Drive Switch
the automatic mode until the problem is corrected.
Where one or more wheels have wheel spin or if addi-
tional traction is needed in sand, deep snow, or loose
308 STARTING AND OPERATING
traction surfaces, activate the “4WD LOCK” switch by They are not designed for cornering at the same speeds as
pulling up once and releasing. This locks the center conventional two-wheel drive vehicles any more than
coupling allowing more torque to be sent to the rear low-slung sports cars are designed to perform satisfacto-
wheels. The “4WD Indicator Light” will come on in the rily in off-road conditions. If at all possible, avoid sharp
cluster. This can be done on the fly, at any vehicle speed. turns or abrupt maneuvers. As with other vehicles of this
To deactivate, simply pull on the switch one more time. type, failure to operate this vehicle correctly may result in
The “4WD Indicator Light” will then go out. loss of control or vehicle rollover.
NOTE: Refer to “Electronic Brake Control System/ POWER STEERING
Electronic Stability Control (ESC)” in “Starting and Op- The standard power steering system will give you good
erating” for further information. vehicle response and increased ease of maneuverability
in tight spaces. The system will provide mechanical
ON-ROAD DRIVING TIPS
steering capability if power assist is lost.
Utility vehicles have higher ground clearance and a
narrower track to make them capable of performing in a If for some reason the power assist is interrupted, it will
wide variety of off-road applications. Specific design still be possible to steer your vehicle. Under these condi-
characteristics give them a higher center of gravity than tions, you will observe a substantial increase in steering
ordinary cars. effort, especially at very low vehicle speeds and during
parking maneuvers.
An advantage of the higher ground clearance is a better
view of the road, allowing you to anticipate problems.
 STARTING AND OPERATING 309
NOTE:
CAUTION!
• Increased noise levels at the end of the steering wheel
travel are considered normal and do not indicate that Prolonged operation of the steering system at the end
there is a problem with the power steering system. of the steering wheel travel will increase the steering
fluid temperature and it should be avoided when
• Upon initial start-up in cold weather, the power steer-
possible. Damage to the power steering pump may
ing pump may make noise for a short amount of time.
occur.
This is due to the cold, thick fluid in the steering
system. This noise should be considered normal, and it
Power Steering Fluid Check
does not in any way damage the steering system.
Checking the power steering fluid level at a defined 5
service interval is not required. The fluid should only be
WARNING!
checked if a leak is suspected, abnormal noises are
Continued operation with reduced power steering apparent, and/or the system is not functioning as antici-
assist could pose a safety risk to yourself and others. pated. Coordinate inspection efforts through an autho-
Service should be obtained as soon as possible. rized dealer.
310 STARTING AND OPERATING
If necessary, add fluid to restore to the proper indicated
CAUTION!
level. With a clean cloth, wipe any spilled fluid from all
Do not use chemical flushes in your power steering surfaces. Refer to “Fluids, Lubricants, and Genuine
system as the chemicals can damage your power Parts” in “Maintaining Your Vehicle” for further
steering components. Such damage is not covered by information.
the New Vehicle Limited Warranty.
PARKING BRAKE
Before leaving the vehicle, make sure that the parking
WARNING! brake is fully applied. Also, be certain to leave an
Fluid level should be checked on a level surface and automatic transmission in PARK, or manual transmission
with the engine off to prevent injury from moving in REVERSE or first gear.
parts and to ensure accurate fluid level reading. Do The parking brake lever is located in the center console.
not overfill. Use only manufacturer’s recommended To apply the parking brake, pull the lever up as firmly as
power steering fluid. possible. To release the parking brake, pull the lever up
slightly, press the center button, then lower the lever
completely.
 STARTING AND OPERATING 311
NOTE:
• When the parking brake is applied and the automatic
transmission is placed in gear, the “Brake Warning
Light” will flash. If vehicle speed is detected, a chime
will sound to alert the driver. Fully release the parking
brake before attempting to move the vehicle.
• This light only shows that the parking brake is ap-
plied. It does not show the degree of brake application.
When parking on a hill, it is important to turn the front 5
wheels toward the curb on a downhill grade and away
from the curb on an uphill grade. For vehicles equipped
Parking Brake with an automatic transmission, apply the parking brake
When the parking brake is applied with the ignition before placing the shift lever in PARK, otherwise the load
switch in the ON position, the “Brake Warning Light” in on the transmission locking mechanism may make it
the instrument cluster will illuminate. difficult to move the shift lever out of PARK. The parking
brake should always be applied whenever the driver is
not in the vehicle.
312 STARTING AND OPERATING

WARNING! WARNING! (Continued)

• When leaving the vehicle, always remove the key • Always fully apply the parking brake when leav-
fob from the ignition and lock your vehicle. ing your vehicle or it may roll and cause damage or
• Never leave children alone in a vehicle, or with injury. Also, be certain to leave an automatic
access to an unlocked vehicle. transmission in PARK, a manual transmission in
REVERSE or first gear. Failure to do so may cause
• Allowing children to be in a vehicle unattended is
the vehicle to roll and cause damage or injury.
dangerous for a number of reasons. A child or
others could be seriously or fatally injured. Chil-
dren should be warned not to touch the parking CAUTION!
brake, brake pedal or the shift lever.
If the Brake System Warning Light remains on with
• Do not leave the key fob in or near the vehicle. A
the parking brake released, a brake system malfunc-
child could operate power windows, other con-
tion is indicated. Have the brake system serviced by
trols, or move the vehicle.
an authorized dealer immediately.
• Be sure the parking brake is fully disengaged
before driving; failure to do so can lead to brake
failure and a collision.
(Continued)
 STARTING AND OPERATING 313
BRAKE SYSTEM If either of the two hydraulic systems lose normal capa-
Your vehicle is equipped with power assisted brakes as bility, the remaining system will still function with some
standard equipment. In the event power assist is lost for loss of overall braking effectiveness. This will be evident
any reason (for example, repeated brake applications by increased pedal travel during application and greater
with the engine off), the brakes will still function. How- pedal force required to slow or stop. In addition, if the
ever, the effort required to brake the vehicle will be much malfunction is caused by an internal leak, as the brake
greater than that required with the power system oper- fluid in the master cylinder drops, the “Brake Warning
ating. Light” will light.

WARNING! WARNING! 5
Riding the brakes can lead to brake failure and Driving a vehicle with the “Brake Warning Light” on
possibly a collision. Driving with your foot resting or is dangerous. A significant decrease in braking per-
riding on the brake pedal can result in abnormally formance or vehicle stability during braking may
high brake temperatures, excessive lining wear, and occur. It will take you longer to stop the vehicle or
possible brake damage. You would not have your full will make your vehicle harder to control. You could
braking capacity in an emergency. have a collision. Have the vehicle checked immedi-
ately.
314 STARTING AND OPERATING
Anti-Lock Brake System (ABS)
WARNING! (Continued)
The ABS provides increased vehicle stability and brake
performance under most braking conditions. The system • The ABS cannot prevent collisions, including
automatically “pumps” the brakes during severe braking those resulting from excessive speed in turns,
conditions to prevent wheel lock-up. following another vehicle too closely, or hydro-
planing.
WARNING! • The capabilities of an ABS-equipped vehicle must
never be exploited in a reckless or dangerous
• Pumping of the anti-lock brakes will diminish manner which could jeopardize the user’s safety
their effectiveness and may lead to a collision. or the safety of others.
Pumping makes the stopping distance longer. Just
press firmly on your brake pedal when you need The “ABS Warning Light” monitors the ABS
to slow down or stop. System. The light will come on when the
• The ABS cannot prevent the natural laws of phys- ignition switch is turned to the ON position
ics from acting on the vehicle, nor can it increase and may stay on for as long as four seconds.
braking or steering efficiency beyond that af-
forded by the condition of the vehicle brakes and If the “ABS Warning Light” remains on or comes on
tires or the traction afforded. while driving, it indicates that the anti-lock portion of the
brake system is not functioning and that service is
(Continued)
 STARTING AND OPERATING 315
required. However, the conventional brake system will working properly. This self-check occurs each time the
continue to operate normally if the “Brake Warning vehicle is started and accelerated past 7 mph (11 km/h).
Light” is not on.
ABS is activated during braking under certain road or
If the “ABS Warning Light” is on, the brake system stopping conditions. ABS-inducing conditions can in-
should be serviced as soon as possible to restore the clude ice, snow, gravel, bumps, railroad tracks, loose
benefits of anti-lock brakes. If the “ABS Warning Light” debris, or panic stops.
does not come on when the ignition switch is turned to
You may also experience the following when the brake
the ON position, have the bulb repaired as soon as
system goes into anti-lock mode:
possible.
• the ABS motor running (it may continue to run for a 5
If both the “Brake Warning Light” and the “ABS Warning
short time after the stop)
Light” remain on, the ABS and Electronic Brake Force
Distribution (EBD) systems are not functioning. Immedi- • the clicking sound of solenoid valves
ate repair to the ABS is required.
• brake pedal pulsations
When the vehicle is driven over 7 mph (11 km/h), you
• a slight drop or fall away of the brake pedal at the end
may also hear a slight clicking sound as well as some
of the stop
related motor noises. These noises are the system per-
forming its self-check cycle to ensure that the ABS These are all normal characteristics of ABS.
316 STARTING AND OPERATING
(HSA), and Electronic Stability Control (ESC). All sys-
WARNING!
tems work together to enhance vehicle stability and
The Anti-Lock Brake System (ABS) contains sophis- control in various driving conditions and are commonly
ticated electronic equipment that may be susceptible referred to as ESC.
to interference caused by improperly installed or
Anti-Lock Brake System (ABS)
high output radio transmitting equipment. This in-
This system aids the driver in maintaining vehicle control
terference can cause possible loss of Anti-Lock brak-
under adverse braking conditions. The system controls
ing capability. Installation of such equipment should
hydraulic brake pressure to prevent wheel lockup and
be performed by qualified professionals.
help avoid skidding on slippery surfaces during braking.
Refer to “Anti-Lock Brake System” in “Starting and
All vehicle wheels and tires must be the same size and
Operating” for further information.
type and tires must be properly inflated to produce
accurate signals for the computer. Traction Control System (TCS)
This system monitors the amount of wheel spin of each of
ELECTRONIC BRAKE CONTROL SYSTEM the driven wheels. If wheel spin is detected, brake
Your vehicle may be equipped with an optional ad- pressure is applied to the slipping wheel(s) and engine
vanced electronic brake control system that includes power is reduced to provide enhanced acceleration and
Anti-Lock Brake System (ABS), Traction Control System stability. A feature of the TCS system functions similar to
(TCS), Brake Assist System (BAS), Electronic Roll Mitiga- a limited slip differential and controls the wheel spin
tion (ERM), Hill Descent Control (HDC), Hill Start Assist
 STARTING AND OPERATING 317
across a driven axle. If one wheel on a driven axle is “pump” the brakes). Do not reduce brake pedal pressure
spinning faster than the other, the system will apply the unless braking is no longer desired. Once the brake pedal
brake of the spinning wheel. This will allow more engine is released, the BAS is deactivated.
torque to be applied to the wheel that is not spinning.
This feature remains active even if TCS and ESC are in WARNING!
either the “Partial Off” or “Full Off” modes. Refer to
• The Brake Assist System (BAS) cannot prevent the
“Electronic Stability Control (ESC)” in this section of this
natural laws of physics from acting on the vehicle,
manual.
nor can it increase the traction afforded by prevail-
Brake Assist System (BAS) ing road conditions.
The BAS is designed to optimize the vehicle’s braking • The BAS cannot prevent collisions, including 5
capability during emergency braking maneuvers. The those resulting from excessive speed in turns,
system detects an emergency braking situation by sens- driving on very slippery surfaces, or hydroplan-
ing the rate and amount of brake application and then ing.
applies optimum pressure to the brakes. This can help • The capabilities of a BAS-equipped vehicle must
reduce braking distances. The BAS complements the never be exploited in a reckless or dangerous
Anti-Lock Brake System (ABS). Applying the brakes very manner which could jeopardize the user’s safety
quickly results in the best BAS assistance. To receive the or the safety of others.
benefit of the system, you must apply continuous brak-
ing pressure during the stopping sequence (do not
318 STARTING AND OPERATING
Electronic Roll Mitigation (ERM) NOTE: Anytime the ESC system is in the “Full Off”
This system anticipates the potential for wheel lift by mode, ERM is disabled. Refer to “Electronic Stability
monitoring the driver’s steering wheel input and the Control (ESC)” in this section for a complete explanation
speed of the vehicle. When ERM determines that the rate of the available ESC modes.
of change of the steering wheel angle and vehicles speed
are sufficient to potentially cause wheel lift, it applies the WARNING!
brake of the appropriate wheel and may also reduce
Many factors, such as vehicle loading, road condi-
engine power to lessen the chance that wheel lift will
tions and driving conditions, influence the chance
occur. ERM will only intervene during very severe or
that wheel lift or rollover may occur. ERM cannot
evasive driving maneuvers.
prevent all wheel lift or roll overs, especially those
ERM can only reduce the chance of wheel lift occurring that involve leaving the roadway or striking objects
during severe or evasive driving maneuvers. It can not or other vehicles. The capabilities of an ERM-
prevent wheel lift due to other factors such as road equipped vehicle must never be exploited in a reck-
conditions, leaving the roadway or striking objects or less or dangerous manner which could jeopardize the
other vehicles. user’s safety or the safety of others.
 STARTING AND OPERATING 319
Hill Descent Control (HDC) – If Equipped Off” button for five seconds. Refer to “Electronic Stability
This system maintains vehicle speed while descending Control (ESC)” in this section of the manual.
hills during off-road driving situations. HDC will auto-
HDC operation can be overridden with brake application
matically apply the brakes to control downhill speed to
to slow the vehicle down below the HDC control speed.
between 4 mph (7 km/h) and 6 mph (9 km/h) depending
Conversely, if more speed is desired during HDC control,
on terrain. The system is activated by placing the vehicle
the accelerator pedal will increase vehicle speed like
in “Off-Road” mode and placing the shift lever in LOW
normal. When either the brake or the accelerator is
or REVERSE. Refer to “Safe Off-Road Driving” in “Start-
released, HDC will control the vehicle back to the origi-
ing and Operating” for further information.
nal set speed.
When HDC is properly enabled, the “Hill 5
HDC is only intended for low speed off-road driving. At
Decent Control Light” in the instrument cluster
vehicle speeds above 31 mph (50 km/h) HDC will no
will be illuminated.
longer function. If the “HDC Indicator Light” begins to
flash this indicates that the brakes are getting too hot and
HDC has the capability to sense terrain and will only
the vehicle should be stopped to allow the brakes to cool.
activate when the vehicle is descending a hill. It will not
activate on level ground. If desired, HDC can be fully
deactivated by putting the vehicle into ESC “Full Off”
mode. This is done by pressing and holding the “ESC
320 STARTING AND OPERATING
HSA Activation Criteria
WARNING!
The following criteria must be met in order for HSA to
HDC is only intended to assist the driver in control- activate:
ling vehicle speed when descending hills. The driver
• Vehicle must be stopped.
must remain attentive to the driving conditions and
is responsible for maintaining a safe vehicle speed. • Vehicle must be on a 7% grade or greater hill.
• Gear selection matches vehicle uphill direction (i.e.,
Hill Start Assist (HSA) – Manual Transmission
vehicle facing uphill is in forward gear; vehicle back-
Only
ing uphill is in REVERSE gear).
The HSA system is designed to assist the driver when
starting a vehicle from a stop on a hill. HSA will maintain
WARNING!
the level of brake pressure the driver applied for a short
period of time after the driver takes their foot off of the There may be situations on minor hills (i.e., less than
brake pedal. If the driver does not apply the throttle 8%), with a loaded vehicle, or while pulling a trailer,
during this short period of time, the system will release when the system will not activate and slight rolling
brake pressure and the vehicle will roll down the hill. The may occur. This could cause a collision with another
system will release brake pressure in proportion to vehicle or object. Always remember the driver is
amount of throttle applied as the vehicle starts to move in responsible for braking the vehicle.
the intended direction of travel.
 STARTING AND OPERATING 321
Disabling/Enabling HSA 5. Release the clutch pedal.
If you wish to turn on or off the HSA system, it can be
6. Rotate the steering wheel one-half turn to the left.
done using the Customer Programmable Features in the
Electronic Vehicle Information Center (EVIC). Refer to 7. Press the “ESC Off” switch (located in the lower
“Electronic Vehicle Information Center (EVIC)” in “Un- switch bank below the climate controls) four times within
derstanding Your Instrument Panel” for further informa- 20 seconds. The “ESC Activation/Malfunction Indicator
tion. Light” should turn on and turn off two times.
For vehicles not equipped with the EVIC, perform the 8. Rotate the steering wheel back to center and then an
following steps: additional half-turn to the right.
5
NOTE: You must complete Steps 1 through 8 within 9. Turn the ignition switch to the OFF position and then
90 seconds. back to the ON position. If the sequence was completed
properly, the “ESC Activation/Malfunction Indicator
1. Center the steering wheel (front wheels pointing
Light” will blink several times to confirm HSA is dis-
straight forward).
abled.
2. Shift the transmission into NEUTRAL.
10. Repeat these steps if you want to return this feature
3. Apply the parking brake. to it’s previous setting.
4. Start the engine.
322 STARTING AND OPERATING
Electronic Stability Control (ESC)
WARNING!
This system enhances directional control and stability of
• The Electronic Stability Control (ESC) cannot pre-
the vehicle under various driving conditions. ESC cor-
vent the natural laws of physics from acting on the
rects for over-steering or under-steering of the vehicle by
vehicle, nor can it increase the traction afforded by
applying the brake of the appropriate wheel to assist in
prevailing road conditions.
counteracting the over-steering or under-steering condi-
tion. Engine power may also be reduced to help the • ESC cannot prevent accidents, including those
vehicle maintain the desired path. ESC uses sensors in resulting from excessive speed in turns, driving on
the vehicle to determine the vehicle path intended by the very slippery surfaces, or hydroplaning.
driver and compares it to the actual path of the vehicle. • The capabilities of an ESC-equipped vehicle must
When the actual path does not match the intended path, never be exploited in a reckless or dangerous
ESC applies the brake of the appropriate wheel to assist manner, which could jeopardize the user’s safety
in counteracting the over-steer or under-steer condition or the safety of others.

• Over-steer - when the vehicle is turning more than ESC Operating Modes
appropriate for the steering wheel position. The ESC system has three available operating modes for
• Under-steer - when the vehicle is turning less than four–wheel drive equipped vehicles and two available
appropriate for the steering wheel position. operating modes for two–wheel drive equipped vehicles.
 STARTING AND OPERATING 323
Full On (Four-Wheel Drive Models) Or On To turn ESC on again, momentarily press the “ESC Off”
(Two-Wheel Drive Models) switch. This will restore the normal “ESC On” mode of
This is the normal operating mode for ESC. Whenever operation.
the vehicle is started the ESC system will be in this “On”
NOTE: To improve the vehicle’s traction when driving
mode. This mode should be used for most driving
with snow chains, or starting off in deep snow, sand or
situations. ESC should only be turned to “Partial Off” or
gravel, it may be desirable to switch to the “Partial Off”
“ESC Off” for specific reasons as noted below.
mode by pressing the “ESC Off” switch. Once the situa-
Partial Off (Four-Wheel Drive Models) Or On tion requiring ESC to be switched to the “Partial Off”
(Two-Wheel Drive Models) mode is overcome, turn ESC back on by momentarily
This mode is entered by momentarily pressing the “ESC pressing the “ESC Off” switch. This may be done while 5
Off” switch. When in “Partial Off” mode, the TCS portion the vehicle is in motion.
of ESC, except for the “limited slip” feature described in
the TCS section, has been disabled and the “ESC
Activation/Malfunction Indicator Light” will be illumi-
nated. All other stability features of ESC function nor-
mally. This mode is intended to be used if the vehicle is
in deep snow, sand or gravel conditions and more wheel
spin than ESC would normally allow is required to gain
traction.
324 STARTING AND OPERATING
“ESC OFF” message will appear in the odometer. Press
WARNING!
and release the Trip Odometer button located on the
When in “Partial Off” mode, the TCS functionality of instrument cluster to clear this message.
ESC, (except for the limited slip feature described in
In this mode, ESC and TCS, except for the “limited slip”
the TCS section), has been disabled and the “ESC Off
feature described in the TCS section, are turned off until
Indicator Light” will be illuminated. All other stabil-
the vehicle reaches a speed of 35 mph (56 km/h). At
ity features of ESC function normally. When in
35 mph (56 km/h) the system returns to “Partial Off”
“Partial Off” mode, the engine power reduction
mode, as described above. TCS remains off. When the
feature of TCS is disabled, and the enhanced vehicle
vehicle speed drops below 30 mph (48 km/h) the ESC
stability offered by the ESC system is reduced.
system shuts off. ESC is deactivated at low vehicle speeds
so that it will not interfere with off-road driving however,
Full Off (Four-Wheel Drive Models Only)
ESC function returns to provide the stability feature at
This mode is intended for off-highway or off-road use
speeds above 35 mph (56 km/h). The “ESC Activation/
when ESC stability features could inhibit vehicle maneu-
Malfunction Indicator Light” will always be illuminated
verability due to trail conditions. This mode is entered by
when ESC is off.
pressing and holding the “ESC Off” switch for five
seconds when the vehicle is stopped and the engine is To turn ESC on again, momentarily press the “ESC Off”
running. After five seconds, the “ESC Activation/ switch. This will restore the “ESC On” mode of operation.
Malfunction Indicator Light” will illuminate and the
 STARTING AND OPERATING 325
NOTE: The “ESC OFF” message will display and an ESC Activation/Malfunction Indicator Light And
audible chime will sound when the shift lever is placed ESC OFF Indicator Light
into the PARK position from any other position, and then The “ESC Activation/Malfunction Indicator
moved out of the PARK position. This will occur even if Light” in the instrument cluster will come on
the message was previously cleared. when the ignition switch is turned to the ON
position. It should go out with the engine
WARNING! running. If the “ESC Activation/Malfunction Indicator
Light” comes on continuously with the engine running, a
With the ESC in the ⴖFull Offⴖ mode, the engine
malfunction has been detected in the ESC system. If this
torque reduction and stability features are disabled.
Therefore, the enhanced vehicle stability offered by
light remains on after several ignition cycles, and the 5
vehicle has been driven several miles (kilometers) at
ESP is unavailable. In an emergency evasive maneu-
speeds greater than 30 mph (48 km/h), see your autho-
ver, the ESC system will not engage to assist in
rized dealer as soon as possible to have the problem
maintaining stability. “ESC Off” mode is intended
diagnosed and corrected.
for off-highway or off-road use only.
The “ESC Activation/Malfunction Indicator Light” (lo-
cated in the instrument cluster) starts to flash as soon as
the tires lose traction and the ESC system becomes active.
The “ESC Activation/Malfunction Indicator Light” also
flashes when TCS is active. If the “ESC Activation/
326 STARTING AND OPERATING
Malfunction Indicator Light” begins to flash during ac- TIRE SAFETY INFORMATION
celeration, ease up on the accelerator and apply as little
Tire Markings
throttle as possible. Be sure to adapt your speed and
driving to the prevailing road conditions.
NOTE:
• The “ESC Activation/Malfunction Indicator Light”
and the “ESC OFF Indicator Light” come on momen-
tarily each time the ignition switch is turned ON.
• Each time the ignition is turned ON, the ESC system
will be ON even if it was turned off previously.
• The ESC system will make buzzing or clicking sounds
when it is active. This is normal; the sounds will stop
when ESC becomes inactive following the maneuver
that caused the ESC activation. 1 — U.S. DOT Safety 4 — Maximum Load
Standards Code (TIN) 5 — Maximum Pressure
The “ESC OFF Indicator Light” indicates the 2 — Size Designation 6 — Treadwear, Traction and
Electronic Stability Control (ESC) is off. 3 — Service Description Temperature Grades
 STARTING AND OPERATING 327
NOTE: tires is the same as for P-Metric tires except for the
• P (Passenger) - Metric tire sizing is based on U.S. letters “LT” that are molded into the sidewall preced-
design standards. P-Metric tires have the letter “P” ing the size designation. Example: LT235/85R16.
molded into the sidewall preceding the size designa-
• Temporary spare tires are spares designed for tempo-
tion. Example: P215/65R15 95H.
rary emergency use only. Temporary high pressure
• European-Metric tire sizing is based on European compact spare tires have the letter “T” or “S” molded
design standards. Tires designed to this standard have into the sidewall preceding the size designation. Ex-
the tire size molded into the sidewall beginning with ample: T145/80D18 103M.
the section width. The letter ⬙P⬙ is absent from this tire
• High flotation tire sizing is based on U.S. design 5
size designation. Example: 215/65R15 96H.
standards and it begins with the tire diameter molded
• LT (Light Truck) - Metric tire sizing is based on U.S. into the sidewall. Example: 31x10.5 R15 LT.
design standards. The size designation for LT-Metric
328 STARTING AND OPERATING
Tire Sizing Chart
EXAMPLE:
Size Designation:
P = Passenger car tire size based on U.S. design standards
ⴖ....blank....ⴖ = Passenger car tire based on European design standards
LT = Light truck tire based on U.S. design standards
T or S = Temporary spare tire
31 = Overall diameter in inches (in)
215 = Section width in millimeters (mm)
65 = Aspect ratio in percent (%)
— Ratio of section height to section width of tire
10.5 = Section width in inches (in)
R = Construction code
— ⬙R⬙ means radial construction
— ⬙D⬙ means diagonal or bias construction
15 = Rim diameter in inches (in)
 STARTING AND OPERATING 329

EXAMPLE:
Service Description:
95 = Load Index
— A numerical code associated with the maximum load a tire can carry
H = Speed Symbol
— A symbol indicating the range of speeds at which a tire can carry a load corresponding
to its load index under certain operating conditions
— The maximum speed corresponding to the speed symbol should only be achieved under
specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and
posted speed limits) 5
Load Identification:
ⴖ....blank....ⴖ = Absence of any text on the sidewall of the tire indicates a Standard Load (SL) tire
Extra Load (XL) = Extra load (or reinforced) tire
Light Load (LL) = Light load tire
C, D, E, F, G = Load range associated with the maximum load a tire can carry at a specified pressure
Maximum Load — Maximum load indicates the maximum load this tire is designed to carry
Maximum Pressure — Maximum pressure indicates the maximum permissible cold tire inflation pressure for
this tire
330 STARTING AND OPERATING
Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall
The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on
however, the date code may only be on one side. Tires the outboard side, then you will find it on the inboard
with white sidewalls will have the full TIN, including the side of the tire.
date code, located on the white sidewall side of the tire.
EXAMPLE:
DOT MA L9 ABCD 0301
DOT = Department of Transportation
— This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire
safety standards and is approved for highway use
MA = Code representing the tire manufacturing location (two digits)
L9 = Code representing the tire size (two digits)
ABCD = Code used by the tire manufacturer (one to four digits)
03 = Number representing the week in which the tire was manufactured (two digits)
—03 means the 3rd week.
01 = Number representing the year in which the tire was manufactured (two digits)
—01 means the year 2001
— Prior to July 2000, tire manufacturers were only required to have one number to represent the
year in which the tire was manufactured. Example: 031 could represent the 3rd week of 1981 or 1991
 STARTING AND OPERATING 331
Tire Terminology And Definitions
Term Definition
B-Pillar The vehicle B-Pillar is the structural member of the body located
behind the front door.
Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the
vehicle has not been driven for at least 3 hours, or driven less
than 1 mile (1.6 km) after sitting for a three hour period. Inflation
pressure is measured in units of PSI (pounds per square inch) or
kPa (kilopascals).
Maximum Inflation Pressure The maximum inflation pressure is the maximum permissible cold 5
tire inflation pressure for this tire. The maximum inflation pres-
sure is molded into the sidewall.
Recommended Cold Tire Inflation Vehicle manufacturer’s recommended cold tire inflation pressure
Pressure as shown on the tire placard.
Tire Placard A paper label permanently attached to the vehicle describing the
vehicle’s loading capacity, the original equipment tire sizes and
the recommended cold tire inflation pressures.
332 STARTING AND OPERATING
Tire Loading And Tire Pressure Tire And Loading Information Placard
Tire And Loading Information Placard Location
NOTE: The proper cold tire inflation pressure is listed
on the driver’s side B-Pillar or the rear edge of the
driver’s side door.

Tire and Loading Information Placard

Tire Placard Location

 STARTING AND OPERATING 333

This placard tells you important information about axles must not be exceeded. For further information on
the: GAWRs, vehicle loading, and trailer towing, refer to
1) number of people that can be carried in the vehicle “Vehicle Loading” in this section.
2) total weight your vehicle can carry To determine the maximum loading conditions of your
3) tire size designed for your vehicle vehicle, locate the statement “The combined weight of
4) cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or
spare tires. XXX kg” on the Tire and Loading Information placard.
The combined weight of occupants, cargo/luggage and
Loading
trailer tongue weight (if applicable) should never exceed
The vehicle maximum load on the tire must not exceed
the weight referenced here. 5
the load carrying capacity of the tire on your vehicle. You
will not exceed the tire’s load carrying capacity if you Steps For Determining Correct Load Limit
adhere to the loading conditions, tire size, and cold tire
1. Locate the statement “The combined weight of occu-
inflation pressures specified on the Tire and Loading
pants and cargo should never exceed XXX lbs or XXX kg”
Information placard and in the “Vehicle Loading” section
on your vehicle’s placard.
of this manual.
2. Determine the combined weight of the driver and
NOTE: Under a maximum loaded vehicle condition,
passengers that will be riding in your vehicle.
gross axle weight ratings (GAWRs) for the front and rear
334 STARTING AND OPERATING
3. Subtract the combined weight of the driver and pas- NOTE:
sengers from XXX lbs or XXX kg. • The following table shows examples on how to calcu-
late total load, cargo/luggage, and towing capacities
4. The resulting figure equals the available amount of
of your vehicle with varying seating configurations
cargo and luggage load capacity. For example, if “XXX”
and number and size of occupants. This table is for
amount equals 1,400 lbs (635 kg) and there will be five
illustration purposes only and may not be accurate for
150 lb (68 kg) passengers in your vehicle, the amount of
the seating and load carry capacity of your vehicle.
available cargo and luggage load capacity is 650 lbs
(295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs • For the following example, the combined weight of
[295 kg]). occupants and cargo should never exceed 865 lbs
(392 kg).
5. Determine the combined weight of luggage and cargo
being loaded on the vehicle. That weight may not safely
exceed the available cargo and luggage load capacity
calculated in Step 4.
6. If your vehicle will be towing a trailer, load from your
trailer will be transferred to your vehicle. Consult this
manual to determine how this reduces the available
cargo and luggage load capacity of your vehicle.
STARTING AND OPERATING 335
336 STARTING AND OPERATING
Safety
WARNING!
Overloading of your tires is dangerous. Overloading WARNING!
can cause tire failure, affect vehicle handling, and
• Improperly inflated tires are dangerous and can
increase your stopping distance. Use tires of the
cause collisions.
recommended load capacity for your vehicle. Never
• Under-inflation increases tire flexing and can re-
overload them.
sult in over-heating and tire failure.
• Over-inflation reduces a tire’s ability to cushion
TIRES — GENERAL INFORMATION
shock. Objects on the road and chuckholes can
Tire Pressure cause damage that result in tire failure.
Proper tire inflation pressure is essential to the safe and • Over-inflated or under-inflated tires can affect
satisfactory operation of your vehicle. Three primary vehicle handling and can fail suddenly, resulting
areas are affected by improper tire pressure: in loss of vehicle control.
• Unequal tire pressures can cause steering prob-
lems. You could lose control of your vehicle.
(Continued)
 STARTING AND OPERATING 337
Tire Inflation Pressures
WARNING! (Continued)
The proper cold tire inflation pressure is listed on the left
• Unequal tire pressures from one side of the ve- side “B” Pillar or rear edge of the driver’s side door.
hicle to the other can cause the vehicle to drift to
the right or left. Some vehicles may have Supplemental Tire Pressure
• Always drive with each tire inflated to the recom- Information for vehicle loads that are less than the
mended cold tire inflation pressure. maximum loaded vehicle condition. These pressure con-
ditions will be found in the “Supplemental Tire Pressure
Economy Information” section of this manual.
Improper inflation pressures can cause uneven wear The pressure should be checked and adjusted as well as 5
patterns to develop across the tire tread. These abnormal inspecting for signs of tire wear or visible damage at least
wear patterns will reduce tread life resulting in a need for once a month. Use a good quality pocket-type gauge to
earlier tire replacement. Under-inflation also increases check tire pressure. Do not make a visual judgement
tire rolling resistance resulting in higher fuel when determining proper inflation. Radial tires may look
consumption. properly inflated even when they are under-inflated.
Ride Comfort And Vehicle Stability
Proper tire inflation contributes to a comfortable ride.
Over-inflation produces a jarring and uncomfortable
ride.
338 STARTING AND OPERATING
Tire pressures change by approximately 1 psi (7 kPa) per
CAUTION!
12°F (7°C) of air temperature change. Keep this in mind
After inspecting or adjusting the tire pressure, al- when checking tire pressure inside a garage, especially in
ways reinstall the valve stem cap. This will prevent the Winter.
moisture and dirt from entering the valve stem,
Example: If garage temperature = 68°F (20°C) and the
which could damage the valve stem.
outside temperature = 32°F (0°C) then the cold tire
inflation pressure should be increased by 3 psi (21 kPa),
Inflation pressures specified on the tire pressure label are
which equals 1 psi (7 kPa) for every 12°F (7°C) for this
always “cold tire inflation pressure.” Cold tire inflation
outside temperature condition.
pressure is defined as the tire pressure after the vehicle
has not been driven for at least three hours or driven less Tire pressure may increase from 2 to 6 psi (13 to 40 kPa)
than 1 mile (1.6 km) after a three hour period. The cold during operation. Do not reduce this normal pressure
tire inflation pressure must not exceed the maximum build up or your tire pressure will be too low.
inflation pressure molded into the tire sidewall.
Check tire pressures more often if subject to a wide range
of outdoor temperatures as tire pressures vary with
temperature changes.
 STARTING AND OPERATING 339
Tire Pressures For High Speed Operation Radial Ply Tires
The manufacturer advocates driving at safe speeds
within posted speed limits. Where speed limits or condi- WARNING!
tions are such that the vehicle can be driven at high
Combining radial ply tires with other types of tires
speeds, maintaining correct tire inflation pressure is very
on your vehicle will cause your vehicle to handle
important. Increased tire pressure and reduced vehicle
poorly. The instability could cause a collision. Al-
loading may be required for high-speed vehicle opera-
ways use radial ply tires in sets of four. Never
tion. Refer to original equipment or an authorized tire
combine them with other types of tires.
dealer for recommended safe operating speeds, loading
and cold tire inflation pressures.
Cuts and punctures in radial tires are repairable only in 5
the tread area because of sidewall flexing. Consult your
WARNING!
authorized tire dealer for radial tire repairs.
High speed driving with your vehicle under maxi-
Spare Tire Matching Original Equipped Tire And
mum load is dangerous. The added strain on your
Wheel – If Equipped
tires could cause them to fail. You could have a
Your vehicle may be equivalent with a spare tire and
serious collision. Do not drive a vehicle loaded to the
wheel in look and function as the original equipment tire
maximum capacity at continuous speeds above
and wheel found on the front or rear axle of your vehicle.
75 mph (120 km/h).
This spare tire may be used in the tire rotation for your
340 STARTING AND OPERATING
vehicle. If your vehicle has this option refer to an Compact Spare Tire – If Equipped
authorized tire dealer for the recommended tire rotation The compact spare is for temporary emergency use only.
pattern. You can identify if your vehicle is equipped with a
compact spare by looking at the spare tire description on
If your vehicle is not equipped with an original equip-
the Tire and Loading Information Placard located on the
ment tire and wheel as a spare, a non-matching tempo-
driver’s side door opening or on the sidewall of the tire.
rary emergency use spare may be equipped with your
Compact spare tire descriptions begin with the letter “T”
vehicle. Temporary use spares are engineered to be used
or “S” preceding the size designation. Example: T145/
only with your vehicle. Your vehicle may be equipped
80D18 103M.
with one of the following types of non-matching tempo-
rary use spares; compact, full size, or limited-use. Do not T, S = Temporary Spare Tire
install more than one non-matching temporary use spare
Since this tire has limited tread life the original equip-
tire/wheel on the vehicle at any given time.
ment tire should be repaired (or replaced) and reinstalled
on your vehicle at the first opportunity.
CAUTION!
Do not install a wheel cover or attempt to mount a
Because of the reduced ground clearance, do not take
conventional tire on the compact spare wheel, since the
your vehicle through an automatic car wash with a
wheel is designed specifically for the compact spare tire.
compact, full size or limited-use temporary spare
Do not install more than one compact spare tire and
installed. Damage to the vehicle may result.
wheel on the vehicle at any given time
 STARTING AND OPERATING 341
your original equipment tire, replace (or repair) the
WARNING!
original equipment tire and reinstall on the vehicle at the
Compact spares are for temporary emergency use first opportunity.
only. With these spares, do not drive more than
Limited-Use Spare – If Equipped
50 mph (80 km/h). Temporary use spares have limited
The limited-use spare tire is for temporary emergency
tread life. When the tread is worn to the tread wear
use only. This tire is identified by a label located on the
indicators, the temporary use spare tire needs to be
limited-use spare wheel. This label contains the driving
replaced. Be sure to follow the warnings, which
limitations for this spare. This tire may look like the
apply to your spare. Failure to do so could result in
original equipped tire on the front or rear axle of your
spare tire failure and loss of vehicle control.
vehicle, but it is not. Installation of this limited-use spare 5
tire affects vehicle handling. Since it is not the same as
Full Size Spare – If Equipped
your original equipment tire, replace (or repair) the
The full size spare is for temporary emergency use only.
original equipment tire and reinstall on the vehicle at the
This tire may look like the original equipped tire on the
first opportunity.
front or rear axle of your vehicle, but it is not. This spare
tire may have limited tread life. When the tread is worn
to the tread wear indicators, the temporary use full size
spare tire needs to be replaced. Since it is not the same as
342 STARTING AND OPERATING
Refer to “Freeing A Stuck Vehicle” in “What To Do In
WARNING!
Emergencies” for further information.
Limited-use spares are for emergency use only. In-
stallation of this limited-use spare tire affects vehicle WARNING!
handling. With this tire, do not drive more than the
Fast spinning tires can be dangerous. Forces generated
speed listed on the limit-use spare wheel. Keep
by excessive wheel speeds may cause tire damage or
inflated to the cold tire inflation pressure listed on
failure. A tire could explode and injure someone. Do
your Tire and Loading Information Placard located
not spin your vehicle’s wheels faster than 30 mph
on the driver’s side door opening. Replace (or repair)
(48 km/h) or for more than 30 seconds continuously
the original equipment tire at the first opportunity
when you are stuck, and do not let anyone near a
and reinstall it on your vehicle. Failure to do so could
spinning wheel, no matter what the speed.
result in loss of vehicle control.
Tread Wear Indicators
Tire Spinning
Tread wear indicators are in the original equipment tires
When stuck in mud, sand, snow, or ice conditions, do not
to help you in determining when your tires should be
spin your vehicle’s wheels faster than 30 mph (48 km/h)
replaced.
or for longer than 30 seconds continuously without
stopping when you are stuck.
 STARTING AND OPERATING 343
Life Of Tire
The service life of a tire is dependent upon varying
factors including, but not limited to:
• Driving style
• Tire pressure
• Distance driven

WARNING!
5
Tires and the spare tire should be replaced after six
years, regardless of the remaining tread. Failure to
1 — Worn Tire follow this warning can result in sudden tire failure.
2 — New Tire
You could lose control and have a collision resulting
These indicators are molded into the bottom of the tread in serious injury or death.
grooves. They will appear as bands when the tread depth
becomes 1/16 in (2 mm). When the tread is worn to the Keep dismounted tires in a cool, dry place with as little
tread wear indicators, the tire should be replaced. exposure to light as possible. Protect tires from contact
with oil, grease, and gasoline.
344 STARTING AND OPERATING
Replacement Tires It is recommended to replace the two front tires or two
The tires on your new vehicle provide a balance of many rear tires as a pair. Replacing just one tire can seriously
characteristics. They should be inspected regularly for affect your vehicle’s handling. If you ever replace a
wear and correct cold tire inflation pressure. The manu- wheel, make sure that the wheel’s specifications match
facturer strongly recommends that you use tires equiva- those of the original wheels.
lent to the originals in size, quality and performance
It is recommended you contact your original equipment
when replacement is needed. (Refer to the paragraph on
or an authorized tire dealer with any questions you may
“Tread Wear Indicators”). Refer to the “Tire and Loading
have on tire specifications or capability. Failure to use
Information” placard for the size designation of your tire.
equivalent replacement tires may adversely affect the
The Load Index and Speed Symbol for your tire will be
safety, handling, and ride of your vehicle.
found on the original equipment tire sidewall. See the
Tire Sizing Chart example found in the Tire Safety
Information section of this manual for more information
relating to the Load Index and Speed Symbol of a tire.
 STARTING AND OPERATING 345

WARNING! WARNING! (Continued)

• Do not use a tire, wheel size or rating other than • Failure to equip your vehicle with tires having
that specified for your vehicle. Some combinations adequate speed capability can result in sudden tire
of unapproved tires and wheels may change sus- failure and loss of vehicle control.
pension dimensions and performance characteris-
tics, resulting in changes to steering, handling, and CAUTION!
braking of your vehicle. This can cause unpredict-
able handling and stress to steering and suspen- Replacing original tires with tires of a different size
sion components. You could lose control and have may result in false speedometer and odometer read- 5
a collision resulting in serious injury or death. Use ings.
only the tire and wheel sizes with load ratings
approved for your vehicle.
• Never use a tire with a smaller load index or
capacity other than what was originally equipped
on your vehicle. Using a tire with a smaller load
index could result in tire overloading and failure.
You could lose control and have a collision.
(Continued)
346 STARTING AND OPERATING
TIRE CHAINS Snow tires generally have lower speed ratings than what
Due to limited clearance, tire chains are not recom- was originally equipped with your vehicle and should
mended. not be operated at sustained speeds over 75 mph
(120 km/h). For speeds above 75 mph (120 km/h) refer to
CAUTION! original equipment or an authorized tire dealer for
recommended safe operating speeds, loading and cold
Damage to the vehicle may result if tire chains are
tire inflation pressures.
used.
While studded tires improve performance on ice, skid
SNOW TIRES and traction capability on wet or dry surfaces may be
Some areas of the country require the use of snow tires poorer than that of non-studded tires. Some states pro-
during the winter. All season tires can be identified by the hibit studded tires; therefore, local laws should be
M+S designation on the tire sidewall. checked before using these tire types.

If you need snow tires, select tires equivalent in size and TIRE ROTATION RECOMMENDATIONS
type to the original equipment tires. Use snow tires only The tires on the front and rear of your vehicle operate at
in sets of four; failure to do so may adversely affect the different loads and perform different steering, driving,
safety and handling of your vehicle. and braking functions. For these reasons, they wear at
unequal rates.
 STARTING AND OPERATING 347
These effects can be reduced by timely rotation of tires.
The benefits of rotation are especially worthwhile with
aggressive tread designs such as those on all season type
tires. Rotation will increase tread life, help to maintain
mud, snow and wet traction levels, and contribute to a
smooth, quiet ride.
Refer to the “Maintenance Schedule” for the proper
maintenance intervals. The reasons for any rapid or
unusual wear should be corrected prior to rotation being
performed. 5
The suggested rotation method is the “rearward cross”
shown in the following diagram. This rotation pattern Tire Rotation
does not apply to some directional tires that must not be
reversed.
348 STARTING AND OPERATING
TIRE PRESSURE MONITORING SYSTEM (TPMS) The TPMS will warn the driver of a low tire pressure if
The Tire Pressure Monitor System (TPMS) will warn the the tire pressure falls below the low-pressure warning
driver of a low tire pressure based on the vehicle recom- limit for any reason, including low temperature effects, or
mended cold placard pressure. natural pressure loss through the tire.
The tire pressure will vary with temperature by about The TPMS will continue to warn the driver of low tire
1 psi (6.9 kPa) for every 12°F (6.5°C). This means that pressure as long as the condition exists, and will not turn
when the outside temperature decreases, the tire pressure off until the tire pressure is at or above the recommended
will decrease. Tire pressure should always be set based cold placard pressure. Once the low tire pressure warn-
on “cold inflation tire pressure”. This is defined as the tire ing (Tire Pressure Monitoring Telltale Light) illuminates,
pressure after the vehicle has not been driven for at least you must increase the tire pressure to the recommended
three hours, or driven less than 1 mile (1.6 km) after a cold placard pressure in order for the Tire Pressure
three hour period. The cold tire inflation pressure must Monitoring Telltale Light to turn off. The system will
not exceed the maximum inflation pressure molded into automatically update and the Tire Pressure Monitoring
the tire sidewall. Refer to “Tires – General Information” Telltale Light will turn off once the system receives the
in “Starting and Operating” for information on how to updated tire pressures. The vehicle may need to be
properly inflate the vehicle’s tires. The tire pressure will driven for up to 20 minutes above 15 mph (24 km/h) in
also increase as the vehicle is driven - this is normal and order for the TPMS to receive this information.
there should be no adjustment for this increased pres-
sure.
 STARTING AND OPERATING 349
For example, your vehicle may have a recommended
CAUTION!
cold (parked for more than three hours) placard pressure
of 30 psi (207 kPa). If the ambient temperature is 68°F • The TPMS has been optimized for the original
(20°C) and the measured tire pressure is 27 psi (186 kPa), equipment tires and wheels. TPMS pressures and
a temperature drop to 20°F (-7°C) will decrease the tire warnings have been established for the tire size
pressure to approximately 23 psi (158 kPa). This tire equipped on your vehicle. Undesirable system
pressure is sufficiently low enough to turn ON the Tire operation or sensor damage may result when us-
Pressure Monitoring Telltale Light. Driving the vehicle ing replacement equipment that is not of the same
may cause the tire pressure to rise to approximately size, type, and/or style. Aftermarket wheels can
27 psi (186 kPa), but the Tire Pressure Monitoring Telltale cause sensor damage. Do not use aftermarket tire 5
Light will still be ON. In this situation, the Tire Pressure sealants or balance beads if your vehicle is
Monitoring Telltale Light will turn OFF only after the equipped with a TPMS, as damage to the sensors
tires are inflated to the vehicle’s recommended cold may result.
placard pressure value. • After inspecting or adjusting the tire pressure,
always reinstall the valve stem cap. This will
prevent moisture and dirt from entering the valve
stem, which could damage the Tire Pressure Moni-
toring Sensor.
350 STARTING AND OPERATING
NOTE: • Seasonal temperature changes will affect tire pressure,
• The TPMS is not intended to replace normal tire care and the TPMS will monitor the actual tire pressure in
and maintenance or to provide warning of a tire failure the tire.
or condition.
Base System
• The TPMS should not be used as a tire pressure gauge This is the TPMS warning indicator located in the
while adjusting your tire pressure. instrument cluster.
• Driving on a significantly under-inflated tire causes The TPMS uses wireless technology with wheel rim
the tire to overheat and can lead to tire failure. mounted electronic sensors to monitor tire pressure lev-
Under-inflation also reduces fuel efficiency and tire els. Sensors, mounted to each wheel as part of the valve
tread life, and may affect the vehicle’s handling and stem, transmit tire pressure readings to the Receiver
stopping ability. Module.
• The TPMS is not a substitute for proper tire mainte- NOTE: It is particularly important for you to check the
nance, and it is the driver’s responsibility to maintain tire pressure in all of the tires on your vehicle regularly
correct tire pressure using an accurate tire gauge, even and to maintain the proper pressure.
if under-inflation has not reached the level to trigger
The TPMS consists of the following components:
illumination of the Tire Pressure Monitoring Telltale
Light. • Receiver Module
 STARTING AND OPERATING 351
• Four Tire Pressure Monitoring Sensors Check TPMS Warnings
The Tire Pressure Monitoring Telltale Light will flash on
• Tire Pressure Monitoring Telltale Light
and off for 75 seconds and remain on solid when a system
Tire Pressure Monitoring Low Pressure Warnings fault is detected. The system fault will also sound a
The Tire Pressure Monitoring Telltale Light will illumi- chime. If the ignition key is cycled, this sequence will
nate in the instrument cluster, a LOW TIRE message will repeat providing the system fault still exists. The Tire
be displayed for a minimum of five seconds, and an Pressure Monitoring Telltale Light will turn off when the
audible chime will be activated when one or more of the fault condition no longer exists. A system fault can occur
four active road tire pressures are low. Should this occur, with any of the following scenarios:
you should stop as soon as possible, check the inflation
1. Jamming due to electronic devices or driving next to 5
pressure of each tire on your vehicle, and inflate each tire
facilities emitting the same radio frequencies as the TPM
to the vehicle’s recommended cold placard pressure
sensors.
value. The system will automatically update and the Tire
Pressure Monitoring Light will extinguish and the LOW 2. Installing some form of aftermarket window tinting
TIRE message will turn off once the updated tire pres- that affects radio wave signals.
sures have been received. The vehicle may need to be
3. Snow or ice around the wheels or wheel housings.
driven for up to 20 minutes above 15 mph (24 km/h) to
receive this information. 4. Using tire chains on the vehicle.
5. Using wheels/tires not equipped with TPM sensors.
352 STARTING AND OPERATING
NOTE: Your vehicle is equipped with a compact spare 5. Once you repair or replace the original road tire and
wheel and tire assembly. reinstall it on the vehicle in place of the compact spare
tire, the TPMS will update automatically and the Tire
1. The compact spare tire does not have a tire pressure
Pressure Monitoring Telltale Light will turn OFF, as long
monitoring sensor. Therefore, the TPMS will not monitor
as no tire pressure is below the low-pressure warning
the tire pressure in the compact spare tire.
limit in any of the four active road tires. The vehicle may
2. If you install the compact spare tire in place of a road need to be driven for up to 20 minutes above 15 mph
tire that has a pressure below the low-pressure warning (24 km/h) in order for the TPMS to receive this
limit, upon the next ignition key cycle, a chime will sound information.
and the Tire Pressure Monitoring Telltale Light and LOW
Premium System – If Equipped
TIRE message will still turn ON due to the low tire.
The TPMS uses wireless technology with wheel rim
3. However, after driving the vehicle for up to 20 min- mounted electronic sensors to monitor tire pressure lev-
utes above 15 mph (24 km/h), the Tire Pressure Moni- els. Sensors, mounted to each wheel as part of the valve
toring Telltale Light will flash on and off for 75 seconds stem, transmit tire pressure readings to the receiver
and then remain on solid. module.
4. For each subsequent ignition key cycle, a chime will NOTE: It is particularly important for you to check the
sound and the Tire Pressure Monitoring Telltale Light will tire pressure in all of your tires regularly and to maintain
flash on and off for 75 seconds and then remain on solid. the proper pressure.
 STARTING AND OPERATING 353
The TPMS consists of the following components: message for a minimum of five seconds and a graphic of
the pressure value(s) with the low tire(s) flashing.
• Receiver Module
• Four Tire Pressure Monitoring Sensors
• Three Trigger Modules (mounted in three of the four
wheel wells)
• Various Tire Pressure Monitoring System Messages,
which display in the Electronic Vehicle Information
Center (EVIC) 5
• Tire Pressure Monitoring Telltale Light
Tire Pressure Monitoring Low Pressure Warnings
The Tire Pressure Monitoring Telltale Light will illumi-
nate in the instrument cluster and an audible chime will Low Tire Pressure Display
be activated when one or more of the four active road tire Should a low tire condition occur on any of the four
pressures are low. The audible chime will sound once active road tire(s), you should stop as soon as possible
every ignition cycle for the first condition that it detects. and inflate all tires that are flashing on the graphic
In addition, the EVIC will display a “LOW TIRE” text
354 STARTING AND OPERATING
display to the vehicle’s recommended cold placard pres-
sure value. The system will automatically update, the
“LOW TIRE” text message will no longer be displayed,
the graphic display of the pressure value(s) will stop
flashing, and the Tire Pressure Monitoring Light will
extinguish once the updated tire pressure(s) have been
received. The vehicle may need to be driven for up to
20 minutes above 15 mph (24 km/h) to receive this
information.
Service TPMS Message
The Tire Pressure Monitoring Telltale Light will flash on
and off for 75 seconds, and remain on solid when a Service TPM System Display
system fault is detected. The system fault will also sound
If the ignition key is cycled, this sequence will repeat,
a chime. The EVIC will display a “SERVICE TPM SYS-
providing the system fault still exists. If the system fault
TEM” message for a minimum of five seconds. This text
no longer exists, the Tire Pressure Monitoring Telltale
message is then followed by a graphic display, with “- -“
Light will no longer flash, the ⬙SERVICE TPM SYSTEM⬙
in place of the pressure value(s) indicating which Tire
text message will not be present, and a pressure value
Pressure Monitoring Sensor(s) is not being received.
 STARTING AND OPERATING 355
will be displayed instead of dashes. A system fault can pressure values still shown. This indicates that the pres-
occur with any of the following scenarios: sure values are still being received from the TPM sensors
but they may not be located in the correct vehicle
1. Jamming due to electronic devices or driving next to
position. The system still needs to be serviced as long as
facilities emitting the same radio frequencies as the TPM
the ⬙SERVICE TPM SYSTEM⬙ message is displayed.
sensors.
NOTE: Your vehicle is equipped with a compact spare
2. Installing some form of aftermarket window tinting
wheel and tire assembly.
that affects radio wave signals.
1. The compact spare tire does not have a tire pressure
3. Snow or ice around the wheels or wheel housings.
monitoring sensor. Therefore, the TPMS will not monitor 5
4. Using tire chains on the vehicle. the tire pressure in the compact spare tire.
5. Using wheels/tires not equipped with TPM sensors. 2. If you install the compact spare tire in place of a road
tire that has a pressure below the low-pressure warning
The EVIC will also display a ⬙SERVICE TPM SYSTEM⬙
limit, upon the next ignition key cycle, a chime will
message for a minimum of five seconds when a system
sound and the Tire Pressure Monitoring Telltale Light
fault related to an incorrect sensor location fault is
will still turn ON due to the low tire. The “LOW TIRE”
detected. In this case, the ⬙SERVICE TPM SYSTEM⬙
text message and the graphic with the low tire pressure
message is then followed with a graphic display with
flashing will be displayed.
356 STARTING AND OPERATING
3. However, after driving the vehicle for up to 20 min- limit in any of the four active road tires. The vehicle may
utes above 15 mph (24 km/h), the Tire Pressure Moni- need to be driven for up to 20 minutes above 15 mph
toring Telltale Light will flash on and off for 75 seconds (24 km/h) in order for the TPMS to receive this
and then remain on solid. In addition, the EVIC will information.
display a “SERVICE TPM SYSTEM” message for a mini-
General Information
mum of five seconds and then display dashes (- -) in
This device complies with Part 15 of the FCC rules and
place of the pressure values.
RSS 210 of Industry Canada. Operation is subject to the
4. For each subsequent ignition key cycle, a chime will following conditions:
sound and the Tire Pressure Monitoring Telltale Light
• This device may not cause harmful interference.
will flash on and off for 75 seconds and then remain on
solid, and the EVIC will display a “SERVICE TPM • This device must accept any interference received,
SYSTEM” message for a minimum of five seconds and including interference that may cause undesired
then display dashes (- -) in place of the pressure values. operation.
5. Once you repair or replace the original road tire and The tire pressure sensors are covered under one of the
reinstall it on the vehicle in place of the compact spare following licenses:
tire, the TPMS will update automatically and the Tire
United States . . . . . . . . . . . . . . . . . . . KR5S18002015B
Pressure Monitoring Telltale Light will turn OFF, as long
Canada. . . . . . . . . . . . . . . . . . . . . . . . 267T-S180015B
as no tire pressure is below the low-pressure warning
 STARTING AND OPERATING 357
FUEL REQUIREMENTS Over 40 auto manufacturers worldwide have issued and
endorsed consistent gasoline specifications (the World-
2.0L And 2.4L Engine
wide Fuel Charter, WWFC) which define fuel properties
This engine is designed to meet all emis-
necessary to deliver enhanced emissions, performance,
sions regulations and provide excellent
and durability for your vehicle. The manufacturer recom-
fuel economy and performance when us-
mends the use of gasolines that meet the WWFC speci-
ing high-quality unleaded “regular” gaso-
fications if they are available.
line having an octane rating of 87. The use
of premium gasoline is not recommended, Reformulated Gasoline
as it will not provide any benefit over regular gasoline in Many areas of the country require the use of cleaner
these engines. burning gasoline referred to as “Reformulated Gasoline.” 5
Reformulated gasoline contains oxygenates and are spe-
Light spark knock at low engine speeds is not harmful to
cifically blended to reduce vehicle emissions and im-
your engine. However, continued heavy spark knock at
prove air quality.
high speeds can cause damage and immediate service is
required. Poor quality gasoline can cause problems such The manufacturer supports the use of reformulated gaso-
as hard starting, stalling, and hesitations. If you experi- line. Properly blended reformulated gasoline will pro-
ence these symptoms, try another brand of gasoline vide excellent performance and durability of engine and
before considering service for the vehicle. fuel system components.
358 STARTING AND OPERATING
Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles
Some fuel suppliers blend unleaded gasoline with oxy- Non-FFV vehicles are compatible with gasoline contain-
genates such as Ethanol. Fuels blended with oxygenates ing 10% ethanol (E10). Gasoline with higher ethanol
may be used in your vehicle. content may void the vehicle’s warranty.
If a Non-FFV vehicle is inadvertently fueled with E-85
CAUTION!
fuel, the engine will have some or all of these symptoms:
DO NOT use gasoline containing Methanol or gaso-
• operate in a lean mode
line containing more than 10% Ethanol. Use of these
blends may result in starting and driveability prob- • OBD II “Malfunction Indicator Light” on
lems, damage critical fuel system components, cause
• poor engine performance
emissions to exceed the applicable standard, and/or
cause the “Malfunction Indicator Light” to illumi- • poor cold start and cold driveability
nate. Pump labels should clearly communicate if a
• increased risk for fuel system component corrosion
fuel contains greater than 10% Ethanol.
To fix a Non-FFV vehicle inadvertently fueled once with
Problems that result from using gasoline containing E-85 perform the following:
Methanol or gasoline containing more than 10% Ethanol
• change the engine oil and oil filter
are not the responsibility of the manufacturer and may
not be covered under warranty. • disconnect and reconnect the battery
 STARTING AND OPERATING 359
• drain the fuel tank (see your authorized dealer) Materials Added To Fuel
All gasoline sold in the United States is required to
More extensive repairs will be required for prolonged
contain effective detergent additives. Use of additional
exposure to E-85 fuel.
detergents or other additives is not needed under normal
MMT In Gasoline conditions and they would result in additional cost.
MMT is a manganese-containing metallic additive that is Therefore, you should not have to add anything to the
blended into some gasoline to increase octane. Gasoline fuel.
blended with MMT provides no performance advantage
beyond gasoline of the same octane number without Fuel System Cautions
MMT. Gasoline blended with MMT reduces spark plug 5
life and reduces emissions system performance in some CAUTION!
vehicles. The manufacturer recommends that gasoline Follow these guidelines to maintain your vehicle’s
without MMT be used in your vehicle. The MMT content performance:
of gasoline may not be indicated on the gasoline pump, • The use of leaded gas is prohibited by Federal law.
therefore, you should ask your gasoline retailer whether Using leaded gasoline can impair engine perfor-
the gasoline contains MMT. It is even more important to mance and damage the emissions control system.
look for gasoline without MMT in Canada, because MMT
can be used at levels higher than those allowed in the (Continued)
United States. MMT is prohibited in Federal and Califor-
nia reformulated gasoline.
360 STARTING AND OPERATING
Carbon Monoxide Warnings
CAUTION! (Continued)
• An out-of-tune engine or certain fuel or ignition WARNING!
malfunctions can cause the catalytic converter to
overheat. If you notice a pungent burning odor or Carbon monoxide (CO) in exhaust gases is deadly.
some light smoke, your engine may be out of tune Follow the precautions below to prevent carbon
or malfunctioning and may require immediate monoxide poisoning:
service. Contact your authorized dealer for service • Do not inhale exhaust gases. They contain carbon
assistance. monoxide, a colorless and odorless gas, which can
• The use of fuel additives, which are now being kill. Never run the engine in a closed area, such as
sold as octane enhancers, is not recommended. a garage, and never sit in a parked vehicle with the
Most of these products contain high concentra- engine running for an extended period. If the
tions of methanol. Fuel system damage or vehicle vehicle is stopped in an open area with the engine
performance problems resulting from the use of running for more than a short period, adjust the
such fuels or additives is not the responsibility of ventilation system to force fresh, outside air into
the manufacturer. the vehicle.
(Continued)
NOTE: Intentional tampering with the emissions con-
trol system can result in civil penalties being assessed
against you.
 STARTING AND OPERATING 361
After removing the gas cap, place the gas cap tether cable
WARNING! (Continued)
over a hook on the inside of the fuel door. This keeps the
• Guard against carbon monoxide with proper gas cap suspended away from and protects the vehicle’s
maintenance. Have the exhaust system inspected surface.
every time the vehicle is raised. Have any abnor-
mal conditions repaired promptly. Until repaired,
drive with all side windows fully open.
• Keep the liftgate closed when driving your vehicle
to prevent carbon monoxide and other poisonous
exhaust gases from entering the vehicle. 5
ADDING FUEL
Fuel Filler Cap (Gas Cap)
The gas cap is behind the fuel filler door, on the left side
of the vehicle. If the gas cap is lost or damaged, be sure
the replacement cap is for use with this vehicle. Fuel Filler Door
362 STARTING AND OPERATING

CAUTION! WARNING! (Continued)

• Damage to the fuel system or emission control • Never add fuel when the engine is running. This is
system could result from using an improper fuel in violation of most state and Federal fire regula-
tank filler cap (gas cap). A poorly fitting cap could tions and may cause the MIL to turn on.
let impurities into the fuel system. • A fire may result if gasoline is pumped into a
• A poorly fitting gas cap may cause the “Malfunc- portable container that is inside of a vehicle. You
tion Indicator Light (MIL)” to turn on. could be burned. Always place gas containers on
• To avoid fuel spillage and overfilling, do not “top the ground while filling.
off” the fuel tank after filling.
NOTE:
• When the fuel nozzle “clicks” or shuts off, the fuel
WARNING! tank is full.
• Never have any smoking materials lit in or near • Tighten the gas cap about 1/4 turn until you hear one
the vehicle when the gas cap is removed or the click. This is an indication that cap is properly tight-
tank is being filled. ened.
(Continued) • If the gas cap is not tightened properly, the MIL will
come on. Be sure the gas cap is tightened every time
the vehicle is refueled.
 STARTING AND OPERATING 363
Loose Fuel Filler Cap Message Vehicle Certification Label
If the vehicle diagnostic system determines that the fuel Your vehicle has a Vehicle Certification Label attached to
filler cap is loose or improperly installed, a “gASCAP” the driver’s door B-Pillar.
message will be displayed in the Odometer/Trip Odom-
The label contains the following information:
eter in the instrument cluster. Refer to “Instrument
Cluster Description” in “Understanding Your Instrument • Name of manufacturer
Panel” for further information. Tighten the fuel filler cap
• Month and year of manufacture
properly and press the odometer/trip odometer RESET
button to turn the message off. If the problem continues, • Gross Vehicle Weight Rating (GVWR)
the message will appear the next time the vehicle is
• Vehicle Identification Number (VIN) 5
started. Refer to “Onboard Diagnostic System” in “Main-
taining Your Vehicle” for further information. • Type of Vehicle

VEHICLE LOADING • Month, Day and Hour of Manufacture (MDH)

As required by National Highway Traffic Safety Admin- The bar code allows a computer scanner to read the
istration regulations, your vehicle has a certification label Vehicle Identification Number (VIN).
affixed to the driver’s side door or B-Pillar.
364 STARTING AND OPERATING
Gross Vehicle Weight Rating (GVWR) Curb Weight
The GVWR is the total allowable weight of your vehicle. The curb weight of a vehicle is defined as the total weight
This includes driver, passengers, and cargo. The total of the vehicle with all fluids, including vehicle fuel, at full
load must be limited so that you do not exceed the capacity conditions, and with no occupants or cargo
GVWR. loaded into the vehicle. The front and rear curb weight
values are determined by weighing your vehicle on a
Tire Size
commercial scale before any occupants or cargo are
The tire size on the Vehicle Certification Label represents
added.
the actual tire size on your vehicle. Replacement tires
must be equal to the load capacity of this tire size. Overloading
The load carrying components (springs, tires, wheels,
Rim Size
etc.) of your vehicle will provide satisfactory service as
This is the rim size that is appropriate for the tire size
long as you do not exceed the GVWR.
listed.
The best way to figure out the total weight of your
Inflation Pressure
vehicle is to weigh it when it is fully loaded and ready for
This is the cold tire inflation pressure for your vehicle, for
operation. Weigh it on a commercial scale to ensure that
all loading conditions.
it is not over the GVWR.
 STARTING AND OPERATING 365
Overloading can cause potential safety hazards and TRAILER TOWING
shorten useful service life. Heavier suspension compo- In this section you will find safety tips and information
nents do not necessarily increase the vehicle’s GVWR. on limits to the type of towing you can reasonably do
with your vehicle. Before towing a trailer, carefully
Loading
review this information to tow your load as efficiently
To load your vehicle properly, first figure out its empty
and safely as possible.
weight. Store heavier items down low and be sure you
distribute their weight as evenly as possible. Stow all To maintain warranty coverage, follow the requirements
loose items securely before driving. Improper weight and recommendations in this manual concerning ve-
distribution can have an adverse effect on the way your hicles used for trailer towing.
vehicle steers and handles, and the way the brakes 5
Common Towing Definitions
operate.
The following trailer towing related definitions will assist
you in understanding the information:
CAUTION!
Gross Vehicle Weight Rating (GVWR)
Do not load your vehicle any heavier than the
The GVWR is the total allowable weight of your vehicle.
GVWR. If you do, parts on your vehicle can break, or
This includes driver, passengers, cargo and tongue
it can change the way your vehicle handles. This
weight. The total load must be limited so that you do not
could cause you to lose control. Also, overloading can
shorten the life of your vehicle.
366 STARTING AND OPERATING
exceed the GVWR. Refer to “Vehicle Loading/Vehicle Gross Axle Weight Rating (GAWR)
Certification Label” in “Starting and Operating” for The GAWR is the maximum capacity of the front and rear
further information. axles. Distribute the load over the front and rear axles
evenly. Make sure that you do not exceed either front or
Gross Trailer Weight (GTW)
rear GAWR. Refer to “Vehicle Loading/Vehicle Certifica-
The GTW is the weight of the trailer plus the weight of all
tion Label” in “Starting and Operating” for further
cargo, consumables and equipment (permanent or tem-
information.
porary) loaded in or on the trailer in its ⬙loaded and
ready for operation⬙ condition.
WARNING!
The recommended way to measure GTW is to put your
It is important that you do not exceed the maximum
fully loaded trailer on a vehicle scale. The entire weight
front or rear GAWR. A dangerous driving condition
of the trailer must be supported by the scale.
can result if either rating is exceeded. You could lose
Gross Combination Weight Rating (GCWR) control of the vehicle and have a collision.
The GCWR is the total permissible weight of your vehicle
and trailer when weighed in combination. Tongue Weight (TW)
The tongue weight is the downward force exerted on the
NOTE: The GCWR rating includes a 150 lbs (68 kg)
hitch ball by the trailer. In most cases it should not be less
allowance for the presence of a driver.
than 10% or more than 15% of the trailer load. You must
consider this as part of the load on your vehicle.
 STARTING AND OPERATING 367
Frontal Area Weight-Distributing Hitch
The frontal area is the maximum height multiplied by the A weight-distributing system works by applying lever-
maximum width of the front of a trailer. age through spring (load) bars. They are typically used
for heavier loads, to distribute trailer tongue weight to
Trailer Sway Control
the tow vehicle’s front axle and the trailer axle(s). When
The trailer sway control is a telescoping link that can be
used in accordance with the manufacturers’ directions, it
installed between the hitch receiver and the trailer tongue
provides for a more level ride, offering more consistent
that typically provides adjustable friction associated with
steering and brake control, thereby enhancing towing
the telescoping motion to dampen any unwanted trailer
safety. The addition of a friction/hydraulic sway control
swaying motions while traveling.
also dampens sway caused by traffic and crosswinds and 5
Weight-Carrying Hitch contributes positively to tow vehicle and trailer stability.
A weight-carrying hitch supports the trailer tongue Trailer sway control and a weight distributing (load
weight, just as if it were luggage located at a hitch ball or equalizing) hitch are recommended for heavier Tongue
some other connecting point of the vehicle. These kind of Weights (TW) and may be required depending on Vehicle
hitches are the most popular on the market today and and Trailer configuration/loading to comply with Gross
they are commonly used to tow small- and medium- Axle Weight Rating (GAWR) requirements.
sized trailers.
368 STARTING AND OPERATING
Trailer Hitch Classification Trailer Hitch Classification Definitions
Your vehicle may be factory equipped for safe towing of Class Max. Trailer Hitch Industry
trailers weighing over 2,000 lbs (907 kg) with the optional Standards
Trailer Tow Prep Package. See your authorized dealer for
Class I - Light Duty 2,000 lbs (907 kg)
package content.
Class II - Medium 3,500 lbs (1 587 kg)
The following chart provides the industry standard for Duty
the maximum trailer weight a given trailer hitch class can Class III - Heavy Duty 5,000 lbs (2 268 kg)
tow and should be used to assist you in selecting the Class IV - Extra 10,000 lbs (4 540 kg)
correct trailer hitch for your intended towing condition. Heavy Duty
Refer to the Trailer Towing Weights (Maximum Trailer Refer to the “Trailer Towing Weights (Maximum
Weight Ratings) chart for the maximum GTW towable for Trailer Weight Ratings)” chart for the Maximum
your given drivetrain. Gross Trailer Weight (GTW) towable for your given
drivetrain.
All trailer hitches should be professionally installed on
your vehicle.
 STARTING AND OPERATING 369
Trailer Towing Weights (Maximum Trailer Weight Ratings)
The following chart provides the maximum trailer weight ratings towable for your given drivetrain.
Engine/Transmission Frontal Area Max. GTW (Gross Trailer Wt.) Max. Tongue Wt.
(See Note)
2.0L Auto/Man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) 150 lbs (50 kg)
2.4L Auto/Man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) 150 lbs (50 kg)
2.4L Auto/Man with 32 sq ft (3.0 sq m) 2,000 lbs (907 kg) 300 lbs (136 kg)
Trailer Tow Prep
Package (AHC)
Refer to local laws for maximum trailer towing speeds. 5
NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and
cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to
“Tire Safety Information” in “Starting and Operating” for further information.
370 STARTING AND OPERATING
Trailer And Tongue Weight
Always load a trailer with 60% to 65% of the weight in
the front of the trailer. This places 10% to 15% of the
Gross Trailer Weight (GTW) on the tow hitch of your
vehicle. Loads balanced over the wheels or heavier in the
rear can cause the trailer to sway severely from side-to-
side which will cause loss of control of the vehicle and
trailer. Failure to load trailers heavier in front is the cause
of many trailer collisions.
Never exceed the maximum trailer tongue weight
stamped on your bumper or trailer hitch.
Consider the following items when computing the
weight on the rear axle of the vehicle:
• The trailer tongue weight of the trailer.
• The weight of any other type of cargo or equipment
put in or on your vehicle.
• The weight of the driver and all passengers.
 STARTING AND OPERATING 371
NOTE: Remember that everything put into or on the
CAUTION! (Continued)
trailer adds to the load on your vehicle. Also, additional
factory-installed options, or authorized dealer-installed • Then, during the first 500 miles (805 km) that a
options, must be considered as part of the total load on trailer is towed, do not drive over 50 mph
your vehicle. Refer to the Tire and Loading Information (80 km/h) and do not make starts at full throttle.
placard in “Tire Safety Information” for the maximum This helps the engine and other parts of the
combined weight of occupants and cargo for your vehicle wear in at the heavier loads.
vehicle.
Perform the maintenance listed in the “Maintenance
Towing Requirements Schedule.” Refer to “Maintenance Schedule” for further
To promote proper break-in of your vehicle drivetrain information. When towing a trailer, never exceed the 5
components, the following guidelines are recommended: GAWR, or GCWR, ratings.

CAUTION! WARNING!
• Do not tow a trailer at all during the first 500 miles Improper towing can lead to a collision. Follow these
(805 km) the new vehicle is driven. The engine, guidelines to make your trailer towing as safe as
axle or other parts could be damaged. possible:
(Continued) (Continued)
372 STARTING AND OPERATING

WARNING! (Continued) WARNING! (Continued)

• Make certain that the load is secured in the trailer • Vehicles with trailers should not be parked on a
and will not shift during travel. When trailering grade. When parking, apply the parking brake on
cargo that is not fully secured, dynamic load shifts the tow vehicle. Put the tow vehicle automatic
can occur that may be difficult for the driver to transmission in PARK. Always block or ⴖchockⴖ
control. You could lose control of your vehicle and the trailer wheels.
have a collision. • GCWR must not be exceeded.
• When hauling cargo or towing a trailer, do not • Total weight must be distributed between the tow
overload your vehicle or trailer. Overloading can vehicle and the trailer such that the following four
cause a loss of control, poor performance or dam- ratings are not exceeded:
age to brakes, axle, engine, transmission, steering, 1. GVWR
suspension, chassis structure or tires. 2. GTW
• Safety chains must always be used between your 3. GAWR
vehicle and trailer. Always connect the chains to 4. Tongue weight rating for the trailer hitch uti-
the frame or hook retainers of the vehicle hitch. lized (This requirement may limit the ability to
Cross the chains under the trailer tongue and always achieve the 10% to 15% range of tongue
allow enough slack for turning corners. weight as a percentage of total trailer weight).
(Continued)
 STARTING AND OPERATING 373
Towing Requirements – Tires replacement procedures. Replacing tires with a higher
load carrying capacity will not increase the vehicle’s
− Do not attempt to tow a trailer while using a compact
GVWR and GAWR limits.
spare tire.
Towing Requirements – Trailer Brakes
− Proper tire inflation pressures are essential to the safe
and satisfactory operation of your vehicle. Refer to − Do not interconnect the hydraulic brake system or
“Tires – General Information” in “Starting and Oper- vacuum system of your vehicle with that of the trailer.
ating” for proper tire inflation procedures. This could cause inadequate braking and possible
personal injury.
− Check the trailer tires for proper tire inflation pres-
sures before trailer usage. − An electronically actuated trailer brake controller is 5
required when towing a trailer with electronically
− Check for signs of tire wear or visible tire damage
actuated brakes. When towing a trailer equipped with
before towing a trailer. Refer to “Tires – General
a hydraulic surge actuated brake system, an electronic
Information” in “Starting and Operating” for the
brake controller is not required.
proper inspection procedure.
− Trailer brakes are recommended for trailers over
− When replacing tires, refer to “Tires – General Infor-
1,000 lbs (454 kg) and required for trailers in excess of
mation” in “Starting and Operating” for proper tire
2,000 lbs (907 kg).
374 STARTING AND OPERATING

CAUTION! WARNING! (Continued)

If the trailer weighs more than 1,000 lbs (454 kg) • Towing any trailer will increase your stopping
loaded, it should have its own brakes and they distance. When towing you should allow for addi-
should be of adequate capacity. Failure to do this tional space between your vehicle and the vehicle
could lead to accelerated brake lining wear, higher in front of you. Failure to do so could result in a
brake pedal effort, and longer stopping distances. collision.

Towing Requirements – Trailer Lights And Wiring

WARNING! Your authorized dealer offers a trailer wiring harness
• Do not connect trailer brakes to your vehicle’s designed specifically for your vehicle.
hydraulic brake lines. It can overload your brake Whenever you pull a trailer, regardless of the trailer size,
system and cause it to fail. You might not have stop lights and turn signals on the trailer are required for
brakes when you need them and could have a motoring safety.
collision. The Trailer Tow Package may include a four- and seven-
(Continued) pin wiring harness. Use a factory approved trailer har-
ness and connector.
NOTE: Do not cut or splice wiring into the vehicles
wiring harness.
 STARTING AND OPERATING 375
The electrical connections are all complete to the vehicle
but you must mate the harness to a trailer connector.
Refer to the following illustrations.

Seven-Pin Connector
1 — Battery 5 — Ground
2 — Backup Lamps 6 — Left Stop/Turn
3 — Right Stop/Turn 7 — Running Lamps
Four-Pin Connector 4 — Electric Brakes
1 — Female Pins 4 — Park
2 — Male Pin 5 — Left Stop/Turn
3 — Ground 6 — Right Stop/Turn
376 STARTING AND OPERATING
Towing Tips − When using the speed control, if you experience speed
Before setting out on a trip, practice turning, stopping drops greater than 10 mph (16 km/h), disengage until
and backing the trailer in an area away from heavy you can get back to cruising speed.
traffic.
− Use speed control in flat terrain and with light loads to
Manual Transmission – If Equipped maximize fuel efficiency.
If using a manual transmission vehicle for trailer towing,
Cooling System
all starts must be in first gear to avoid excessive clutch
To reduce the potential for engine and transmission
slippage.
overheating, take the following actions:
Automatic Transmission – If Equipped
− City Driving
The automatic transmission fluid and filter should be
When stopped for short periods of time, shift the trans-
changed if you REGULARLY tow a trailer for more than
mission into NEUTRAL but do not increase engine idle
45 minutes of continuous operation. Refer to “Mainte-
speed.
nance Schedule” for the proper maintenance intervals.
− Highway Driving
Electronic Speed Control – If Equipped
Reduce speed.
− Do not use in hilly terrain or with heavy loads.
− Air Conditioning
Turn off temporarily.
 STARTING AND OPERATING 377
RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.)
Towing Condition Wheels OFF the Ground Manual Transmission Automatic
Transmission
Flat Tow None NOT ALLOWED
• Transmission in NEUTRAL
• Key in ACC
Front NOT ALLOWED OK (FWD Only)
Dolly Tow
Rear NOT ALLOWED NOT ALLOWED
On Trailer All OK OK
5
NOTE: Vehicles equipped with manual transmissions
may be recreationally towed (flat towed) at any legal
highway speed, for any distance, if the manual transmis-
sion is in NEUTRAL and the ignition key is in the ACC
position.
378 STARTING AND OPERATING

CAUTION!
• Do not flat tow any vehicle equipped with an
automatic transmission. Damage to the drivetrain
will result. If these vehicles require towing, make
sure all drive wheels are off the ground.
• Front or rear wheel lifts should not be used.
Internal damage to the transmission or transfer
case will occur if a front or rear wheel lift is used
when recreational towing. The only exception is
that FWD (NOT 4WD) automatic transmission
models may be towed with the front wheels raised
on a dolly.
 WHAT TO DO IN EMERGENCIES

CONTENTS
䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . 380 䡵 Jump-Starting Procedures . . . . . . . . . . . . . . . . 392
䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 380 ▫ Preparations For Jump-Start . . . . . . . . . . . . . 393
䡵 Automatic Transmission Overheating . . . . . . . 381 ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . 394
䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 382 䡵 Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . 396 6
▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . . 383 䡵 Shift Lever Override . . . . . . . . . . . . . . . . . . . 397
▫ Spare Tire Stowage . . . . . . . . . . . . . . . . . . . 383 䡵 Towing A Disabled Vehicle . . . . . . . . . . . . . . . 399
▫ Preparations For Jacking . . . . . . . . . . . . . . . 383 ▫ With Ignition Key . . . . . . . . . . . . . . . . . . . . 399
▫ Jacking Instructions . . . . . . . . . . . . . . . . . . . 384 ▫ Without The Ignition Key . . . . . . . . . . . . . . 400
▫ Road Tire Installation . . . . . . . . . . . . . . . . . 390
380 WHAT TO DO IN EMERGENCIES
HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS
The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the
instrument panel, below the radio. potential for overheating by taking the appropriate action.
Press the switch to turn on the Hazard Warning • On the highways — slow down.
flasher. When the switch is activated, all directional
• In city traffic — while stopped, place the transmission
turn signals will flash on and off to warn oncoming
in NEUTRAL, but do not increase engine idle speed.
traffic of an emergency. Press the switch a second time to
turn off the Hazard Warning flashers. NOTE: There are steps that you can take to slow down
an impending overheat condition:
This is an emergency warning system and it should not
be used when the vehicle is in motion. Use it when your • If your air conditioner (A/C) is on, turn it off. The A/C
vehicle is disabled and it is creating a safety hazard for system adds heat to the engine cooling system and
other motorists. turning the A/C off can help remove this heat.
When you must leave the vehicle to seek assistance, the • You can also turn the temperature control to maximum
Hazard Warning flashers will continue to operate even heat, the mode control to floor and the blower control
though the ignition is placed in the OFF position. to high. This allows the heater core to act as a
supplement to the radiator and aids in removing heat
NOTE: With extended use the Hazard Warning flashers
from the engine cooling system.
may wear down your battery.
 WHAT TO DO IN EMERGENCIES 381

CAUTION! WARNING!
Driving with a hot cooling system could damage You or others can be badly burned by hot engine
your vehicle. If the pointer rises to the H (red) mark, coolant (antifreeze) or steam from your radiator. If
the instrument cluster will sound a chime. When you see or hear steam coming from under the hood,
safe, pull over and stop the vehicle with the engine at do not open the hood until the radiator has had time
idle. Turn off the air conditioning and wait until the to cool. Never try to open a cooling system pressure
pointer drops back into the normal range. If the cap when the radiator or coolant bottle is hot.
pointer remains on the H (red) mark for more than a
minute, turn the engine off immediately and call for AUTOMATIC TRANSMISSION OVERHEATING
service. During sustained high speed driving or trailer towing up
long grades on hot days, the automatic transmission oil 6
may become too hot.
If this happens, the transmission overheat in-
dicator light will come on, and the vehicle will
slow slightly until the automatic transmission
cools down enough to allow a return to the
requested speed. If the high speed is maintained, the
overheating may reoccur, as before, in a cyclic fashion.
382 WHAT TO DO IN EMERGENCIES
JACKING AND TIRE CHANGING
WARNING! (Continued)
WARNING! • Never start or run the engine while the vehicle is
on a jack.
• Do not attempt to change a tire on the side of the • The jack is designed to be used as a tool for
vehicle close to moving traffic. Pull far enough off changing tires only. The jack should not be used to
the road to avoid the danger of being hit when lift the vehicle for service purposes. The vehicle
operating the jack or changing the wheel. should be jacked on a firm level surface only.
• Being under a jacked-up vehicle is dangerous. The Avoid ice or slippery areas.
vehicle could slip off the jack and fall on you. You
could be crushed. Never put any part of your body
under a vehicle that is on a jack. If you need to get
under a raised vehicle, take it to a service center
where it can be raised on a lift.
(Continued)
 WHAT TO DO IN EMERGENCIES 383
Jack Location Spare Tire Removal
The jack and jack-handle are stowed under the load floor Lift up the load floor cover and remove the hold down.
in the cargo area.
Preparations For Jacking
1. Park the vehicle on a firm level surface, avoiding ice or
slippery areas.

WARNING!
Do not attempt to change a tire on the side of the
vehicle close to moving traffic, pull far enough off
the road to avoid the danger of being hit when
operating the jack or changing the wheel.
6

2. Turn on the Hazard Warning flasher.

Spare Tire And Jack Stowage 3. Set the parking brake.
Spare Tire Stowage 4. Place the shift lever in PARK (automatic transmission)
The compact spare tire is stowed under the rear load floor or REVERSE (manual transmission).
in the cargo area.
384 WHAT TO DO IN EMERGENCIES
5. Turn OFF the ignition.
WARNING! (Continued)
6. Block both the front and rear of the • Always park on a firm, level surface as far from
wheel diagonally opposite the jacking the edge of the roadway as possible before raising
position. For example, if changing the the vehicle.
right front tire, block the left rear • Turn on the Hazard Warning flasher.
wheel. • Block the wheel diagonally opposite the wheel to
be raised.
• Set the parking brake firmly and set an automatic
NOTE: Passengers should not remain in the vehicle
transmission in PARK; a manual transmission in
while the vehicle is being jacked.
REVERSE.
Jacking Instructions • Never start or run the engine with the vehicle on a
jack.
WARNING! • Do not let anyone sit in the vehicle when it is on a
jack.
Carefully follow these tire changing warnings to
help prevent personal injury or damage to your • Do not get under the vehicle when it is on a jack.
vehicle: • Only use the jack in the positions indicated and
for lifting this vehicle during a tire change.
(Continued)
(Continued)
 WHAT TO DO IN EMERGENCIES 385

WARNING! (Continued) CAUTION!

• If working on or near a roadway, be extremely Do not attempt to raise the vehicle by jacking on
careful of motor traffic. locations other than those indicated in the Jacking
• To assure that spare tires, flat or inflated, are Instructions for this vehicle.
securely stowed, spares must be stowed with the
valve stem facing the ground. NOTE: Refer to “Tires — General Information” in
“Starting And Operating” for further information about
the spare tire, it’s use, and operation.
1. Remove the scissors jack and lug wrench from the
spare wheel as an assembly. Turn the jack screw to the left
to loosen the lug wrench and remove the wrench from
6
the jack assembly.
Jack Warning Label
2. Loosen, but do not remove, the wheel nuts by turning
them to the left one turn while the wheel is still on the
ground.
NOTE: There are front and rear jacking locations on
each side of the body. The front locations are outlined by
386 WHAT TO DO IN EMERGENCIES
two triangular cutouts on one of the flanges in the sill
CAUTION!
flange assembly. The rear location is the same but with
two rectangular cutouts. For vehicles equipped with Do not attempt to raise the vehicle by jacking on
plastic trim, the plastic has been cut away to expose the locations other than those indicated.
jacking locations in the body.

Jack Locations Front Jacking Location

 WHAT TO DO IN EMERGENCIES 387
3. Turn the jack screw to the left until the jack can be
placed under the jacking location. Once the jack is
positioned, turn the jack screw to the right until the jack
head is properly engaged with the lift area closest to the
wheel to be changed.

WARNING!
Raising the vehicle higher than necessary can make
the vehicle less stable. It could slip off the jack and
hurt someone near it. Raise the vehicle only enough
to remove the tire.
6
Rear Jacking Location
4. Using the swivel wrench raise the vehicle by turning
For vehicles equipped with plastic trim, the plastic has
the jack screw to the right. Raise the vehicle only until the
been cut away to expose the jacking locations in the body.
tire just clears the surface and enough clearance is
Do not raise the vehicle until you are sure the jack is obtained to install the spare tire. Minimum tire lift
securely engaged. provides maximum stability.
388 WHAT TO DO IN EMERGENCIES
5. Remove the wheel nuts and pull the wheel and wheel
covers, where applicable, off the hub. Install the spare
wheel and wheel nuts with the cone shaped end of the
nuts toward the wheel. Lightly tighten the nuts.

WARNING!
To avoid the risk of forcing the vehicle off the jack,
do not tighten the wheel nuts fully until the vehicle
has been lowered. Failure to follow this warning may
result in personal injury.

CAUTION! Mounting Spare Tire

Be sure to mount the spare tire with the valve stem WARNING!
facing outward. The vehicle could be damaged if the
To avoid possible personal injury, handle the wheel
spare tire is mounted incorrectly.
covers with care to avoid contact with any sharp
edges.
 WHAT TO DO IN EMERGENCIES 389
NOTE: The wheel cover is held on the wheel by the
WARNING!
wheel nuts. When reinstalling the original wheel, prop-
erly align the wheel cover to the valve stem, place the A loose tire or jack thrown forward in a collision or
wheel cover onto the wheel, then install the wheel nuts. hard stop could endanger the occupants of the ve-
hicle. Always stow the jack parts and the spare tire in
6. Lower the vehicle by turning the jack screw to the left.
the places provided.
7. Finish tightening the nuts. Push down on the wrench
while at the end of the handle for increased leverage. 9. Place the deflated (flat) tire in the cargo area, have the
Tighten the lug nuts in a star pattern until each nut has tire repaired or replaced as soon as possible.
been tightened twice. The correct wheel nut torque is
100 ft lbs (135 N·m). If you doubt that you have tightened WARNING!
the nuts correctly, have them checked with a torque
A loose tire thrown forward in a collision or hard
6
wrench by your authorized dealer or service station.
stop could injure the occupants in the vehicle. Have
8. Remove the wheel blocks and lower the jack until it is the deflated (flat) tire repaired or replaced immedi-
free. Reassemble the lug wrench to the jack assembly and ately.
stow it in the spare tire area. Secure the assembly using
the means provided. 10. Check the spare tire pressure as soon as possible.
Correct the tire pressure as required.
390 WHAT TO DO IN EMERGENCIES
Road Tire Installation
Vehicles Equipped With Wheel Covers
1. Mount the road tire on the axle.
2. To ease the installation process for steel wheels with
wheel covers, install two lug nuts on the mounting studs
which are on each side of the valve stem. Install the lug
nuts with the cone shaped end of the nut toward the
wheel. Lightly tighten the lug nuts.

WARNING!
Tire And Wheel Cover Or Center Cap
To avoid the risk of forcing the vehicle off the jack,
1 — Valve Stem 4 — Wheel Cover
do not tighten the lug nuts fully until the vehicle is 2 — Valve Notch 5 — Mounting Stud
lowered to the ground. Failure to follow this warning 3 — Wheel Lug Nut
may result in personal injury.
3. Align the valve notch in the wheel cover with the
valve stem on the wheel. Install the cover by hand,
snapping the cover over the two lug nuts. Do not use a
hammer or excessive force to install the cover.
 WHAT TO DO IN EMERGENCIES 391
4. Install the remaining lug nuts with the cone shaped correct tightness, have them checked with a torque
end of the nut toward the wheel. Lightly tighten the lug wrench by your authorized dealer or service station.
nuts.
7. After 25 miles (40 km) check the lug nut torque with a
torque wrench to ensure that all lug nuts are properly
WARNING!
seated against the wheel.
To avoid the risk of forcing the vehicle off the jack,
Vehicles Without Wheel Covers
do not tighten the lug nuts fully until the vehicle is
lowered to the ground. Failure to follow this warning 1. Mount the road tire on the axle.
may result in personal injury.
2. Install the remaining lug nuts with the cone shaped
end of the nut toward the wheel. Lightly tighten the lug
5. Lower the vehicle to the ground by turning the jack
handle counterclockwise.
nuts. 6
6. Finish tightening the lug nuts. Push down on the WARNING!
wrench while at the end of the handle for increased
To avoid the risk of forcing the vehicle off the jack,
leverage. Tighten the lug nuts in a star pattern until each
do not tighten the lug nuts fully until the vehicle is
nut has been tightened twice. The correct tightness of
lowered to the ground. Failure to follow this warning
each lug nut is 100 ft/lbs (135 N·m). If in doubt about the
may result in personal injury.
392 WHAT TO DO IN EMERGENCIES
3. Lower the vehicle to the ground by turning the jack NOTE: When using a portable battery booster pack
handle counterclockwise. follow the manufacturer’s operating instructions and
precautions.
4. Finish tightening the lug nuts. Push down on the
wrench while at the end of the handle for increased
CAUTION!
leverage. Tighten the lug nuts in a star pattern until each
nut has been tightened twice. The correct tightness of Do not use a portable battery booster pack or any
each lug nut is 100 ft/lbs (135 N·m). If in doubt about the other booster source with a system voltage greater
correct tightness, have them checked with a torque than 12 Volts or damage to the battery, starter motor,
wrench by your authorized dealer or service station. alternator or electrical system may occur.
5. After 25 miles (40 km) check the lug nut torque with a
torque wrench to ensure that all lug nuts are properly WARNING!
seated against the wheel.
Do not attempt jump-starting if the battery is frozen.
JUMP-STARTING PROCEDURES It could rupture or explode and cause personal injury.
If your vehicle has a discharged battery it can be jump-
started using a set of jumper cables and a battery in
another vehicle or by using a portable battery booster
pack. Jump-starting can be dangerous if done improperly
so please follow the procedures in this section carefully.
 WHAT TO DO IN EMERGENCIES 393
Preparations For Jump-Start
The battery in your vehicle is located in the front of the
engine compartment below the air intake duct. To access
the battery remove the air intake duct by turning the two
finger screws, located on the radiator support.

6
Positive Battery Post

Air Intake Finger Screws

394 WHAT TO DO IN EMERGENCIES
3. If using another vehicle to jump-start the battery, park
WARNING!
the vehicle within the jumper cables reach, set the
• Take care to avoid the radiator cooling fan when- parking brake and make sure the ignition is OFF.
ever the hood is raised. It can start anytime the
ignition switch is on. You can be injured by WARNING!
moving fan blades.
Do not allow vehicles to touch each other as this
• Remove any metal jewelry such as watch bands or
could establish a ground connection and personal
bracelets that might make an inadvertent electrical
injury could result.
contact. You could be seriously injured.
• Batteries contain sulfuric acid that can burn your Jump-Starting Procedure
skin or eyes and generate hydrogen gas which is
flammable and explosive. Keep open flames or WARNING!
sparks away from the battery.
Failure to follow this procedure could result in per-
1. Set the parking brake, shift the automatic transmission sonal injury or property damage due to battery ex-
into PARK and turn the ignition to LOCK. plosion.
2. Turn off the heater, radio, and all unnecessary electri-
cal accessories.
 WHAT TO DO IN EMERGENCIES 395

CAUTION! WARNING!
Failure to follow these procedures could result in Do not connect the cable to the negative post (-) of the
damage to the charging system of the booster vehicle discharged battery. The resulting electrical spark
or the discharged vehicle. could cause the battery to explode and could result in
personal injury.
NOTE: Remove Air Intake before proceeding with this
Jump-Starting procedure. 5. Start the engine in the vehicle that has the booster
battery, let the engine idle a few minutes, and then start
1. Connect the positive (+) end of the jumper cable to the
the engine in the vehicle with the discharged battery.
positive (+) post of the discharged vehicle.
Once the engine is started, remove the jumper cables in
2. Connect the opposite end of the positive (+) jumper
the reverse sequence:
6
cable to the positive (+) post of the booster battery.
3. Connect the negative end (-) of the jumper cable to the 6. Disconnect the negative (-) jumper cable from the
negative (-) post of the booster battery. engine ground of the vehicle with the discharged battery.

4. Connect the opposite end of the negative (-) jumper 7. Disconnect the negative end (-) of the jumper cable
cable to a good engine ground (exposed metal part of the from the negative (-) post of the booster battery.
discharged vehicle’s engine) away from the battery and
the fuel injection system.
396 WHAT TO DO IN EMERGENCIES
8. Disconnect the opposite end of the positive (+) jumper FREEING A STUCK VEHICLE
cable from the positive (+) post of the booster battery. If your vehicle becomes stuck in mud, sand or snow, it
can often be moved by a rocking motion. Turn your
9. Disconnect the positive (+) end of the jumper cable
steering wheel right and left to clear the area around the
from the positive (+) post of the discharged vehicle.
front wheels. Then shift back and forth between DRIVE
10. Reinstall the air intake duct. and REVERSE (with automatic transmission) or 1st gear
and Reverse (with manual transmission). Using minimal
If frequent jump-starting is required to start your vehicle
accelerator pedal pressure to maintain the rocking mo-
you should have the battery and charging system in-
tion, without spinning the wheels, is most effective.
spected at your authorized dealer.
CAUTION!
CAUTION!
Racing the engine or spinning the wheels may lead to
Accessories that can be plugged into the vehicle
transmission overheating and failure. Allow the en-
power outlets draw power from the vehicle’s battery,
gine to idle with the shift lever in NEUTRAL for at
even when not in use (i.e., cellular phones, etc.).
least one minute after every five rocking-motion
Eventually, if plugged in long enough, the vehicle’s
cycles. This will minimize overheating and reduce
battery will discharge sufficiently to degrade battery
the risk of transmission failure during prolonged
life and/or prevent the engine from starting.
efforts to free a stuck vehicle.
 WHAT TO DO IN EMERGENCIES 397
NOTE: If your vehicle is equipped with Traction Con-
WARNING!
trol or Electronic Stability Control (ESC), turn the system
OFF before attempting to “rock” the vehicle. Fast spinning tires can be dangerous. Forces gener-
ated by excessive wheel speeds may cause damage, or
CAUTION! even failure, of the axle and tires. A tire could
explode and injure someone. Do not spin your vehi-
• When “rocking” a stuck vehicle by moving between
cle’s wheels faster than 30 mph (48 km/h) or for
DRIVE and REVERSE (with automatic transmission)
longer than 30 seconds continuously without stop-
or 1st gear and Reverse (with manual transmission),
ping when you are stuck and do not let anyone near
do not spin the wheels faster than 15 mph (24 km/h),
a spinning wheel, no matter what the speed.
or drivetrain damage may result.
• Revving the engine or spinning the wheels too fast 6
may lead to transmission overheating and failure. It SHIFT LEVER OVERRIDE
can also damage the tires. Do not spin the wheels If a malfunction occurs and the shift lever cannot be
above 30 mph (48 km/h) while in gear (no transmis- moved out of the PARK position, you can use the
sion shifting occurring). following procedure to temporarily move the shift lever:
1. Firmly apply the parking brake.
398 WHAT TO DO IN EMERGENCIES
2. Remove the shift lever override access cover located 3. Turn the ignition switch to the ON/RUN position
on the right side of the shifter housing. without starting the engine (engine OFF).
4. Press and maintain firm pressure on the brake pedal.
5. Using a small screwdriver or similar tool, push and
hold the override release lever forward.
6. Move the shift lever to the NEUTRAL position.
7. The vehicle may then be started in NEUTRAL.
8. Reinstall the shift lever override access cover.

Shift Lever Override Access Cover

 WHAT TO DO IN EMERGENCIES 399
TOWING A DISABLED VEHICLE
AUTOMATIC MANUAL
Towing Condition Wheels OFF the Ground
TRANSMISSION TRANSMISSION
Transmission in
Flat Tow NONE NOT ALLOWED
NEUTRAL
Rear NOT ALLOWED NOT ALLOWED
Wheel Lift or Dolly Tow
Front FWD Models ONLY FWD Models ONLY
Flatbed ALL BEST METHOD BEST METHOD
With Ignition Key
CAUTION!
Automatic Transmission 6
DO NOT flat tow any vehicle equipped with an
• Front Wheel Drive (FWD) vehicles can be towed with automatic transmission. Damage to the drivetrain
the front wheels elevated or on a flatbed truck (all four will result.
wheels OFF the ground).
Manual Transmission
• Four-Wheel Drive (4WD) vehicles must be towed on a
flatbed truck (all four wheels OFF the ground). • Front Wheel Drive (FWD) or Four-Wheel Drive (4WD)
vehicles can be flat towed (all four wheels on the
ground) with the transmission in NEUTRAL.
400 WHAT TO DO IN EMERGENCIES
• FWD vehicles can be towed with the front wheels
CAUTION!
elevated.
• FWD or 4WD vehicles can be towed on a flatbed truck Failure to follow these cautions could result in dam-
(all wheels OFF the ground). age to your vehicle:
• Do not attempt to use sling-type equipment when
CAUTION! towing. When securing the vehicle to a flatbed
DO NOT flat tow disabled vehicle if condition is truck, do not attach to front or rear suspension
related to the clutch, transmission or driveline. components.
Additional damage to the drivetrain could result. • If the vehicle being towed requires steering, the
ignition switch must be in the ON/RUN or ACC
All Transmissions position, not in the LOCK/OFF position.
If you must use the accessories (wipers, defroster, etc.)
while being towed (wipers, defrosters, etc.), the key must Without The Ignition Key
be in the ON/RUN position, not the ACC position. Make Special care must be taken when the vehicle is towed
certain the transmission remains in NEUTRAL. with the ignition in the LOCK/OFF position. The only
approved method of towing without the ignition key is
If the vehicle’s battery is discharged, see “Shift Lever with a flatbed truck. Proper towing equipment is neces-
Override” in “What To Do In Emergencies” for instruc- sary to prevent damage to the vehicle.
tions on shifting the automatic transmission out of the
PARK position for towing.
 MAINTAINING YOUR VEHICLE

CONTENTS
䡵 Engine Compartment — 2.0L . . . . . . . . . . . . . 403 䡵 Maintenance Procedures . . . . . . . . . . . . . . . . . 408
䡵 Engine Compartment — 2.4L . . . . . . . . . . . . . 404 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 409
䡵 Onboard Diagnostic System — OBD II . . . . . . 405 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 412
▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 405 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . 412
䡵 Emissions Inspection And Maintenance ▫ Maintenance-Free Battery . . . . . . . . . . . . . . 413
Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406 7
▫ Air Conditioner Maintenance . . . . . . . . . . . . 414
䡵 Replacement Parts . . . . . . . . . . . . . . . . . . . . . 407
▫ Body Lubrication . . . . . . . . . . . . . . . . . . . . 417
䡵 Dealer Service . . . . . . . . . . . . . . . . . . . . . . . . 408
▫ Windshield Wiper Blades . . . . . . . . . . . . . . . 417
▫ Adding Washer Fluid . . . . . . . . . . . . . . . . . 418
402 MAINTAINING YOUR VEHICLE
▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . 419 䡵 Vehicle Storage . . . . . . . . . . . . . . . . . . . . . . . 442
▫ Cooling System . . . . . . . . . . . . . . . . . . . . . 421 䡵 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . 442
▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . 426 䡵 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 443
▫ Automatic Transmission ▫ Headlamps . . . . . . . . . . . . . . . . . . . . . . . . 443
(CVT) – If Equipped . . . . . . . . . . . . . . . . . . 429
▫ Fog Lamps . . . . . . . . . . . . . . . . . . . . . . . . . 443
▫ Manual Transmission – If Equipped . . . . . . . 430
▫ Rear Turn Signal And Backup Lamp . . . . . . . 444
▫ Rear Drive Assembly (RDA) – AWD/4WD
▫ License Lamps . . . . . . . . . . . . . . . . . . . . . . 444
Models Only . . . . . . . . . . . . . . . . . . . . . . . 431
▫ Center High-Mounted Stoplamp . . . . . . . . . 444
▫ Power Transfer Unit (PTU) – AWD/4WD
Models Only . . . . . . . . . . . . . . . . . . . . . . . 431 䡵 Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . 445
▫ Appearance Care And Protection From 䡵 Fluids, Lubricants, And Genuine Parts . . . . . . . 446
Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . 432
▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 446
䡵 Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438
▫ Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . 447
▫ Integrated Power Module . . . . . . . . . . . . . . 438
 MAINTAINING YOUR VEHICLE 403
ENGINE COMPARTMENT — 2.0L

1 — Washer Fluid Reservoir 6 — Air Cleaner Filter

2 — Power Steering Fluid Reservoir 7 — Coolant Pressure Cap
3 — Engine Oil Fill 8 — Engine Oil Dipstick
4 — Brake Fluid Reservoir 9 — Engine Coolant Reservoir
5 — Integrated Power Module (Fuses)
404 MAINTAINING YOUR VEHICLE
ENGINE COMPARTMENT — 2.4L

1 — Washer Fluid Reservoir 6 — Air Cleaner Filter

2 — Power Steering Fluid Reservoir 7 — Coolant Pressure Cap
3 — Engine Oil Fill 8 — Engine Oil Dipstick
4 — Brake Fluid Reservoir 9 — Engine Coolant Reservoir
5 — Integrated Power Module (Fuses)
 MAINTAINING YOUR VEHICLE 405
ONBOARD DIAGNOSTIC SYSTEM — OBD II
CAUTION!
Your vehicle is equipped with a sophisticated onboard
diagnostic system called OBD II. This system monitors • Prolonged driving with the MIL on could cause
the performance of the emissions, engine, and automatic further damage to the emission control system. It
transmission control systems. When these systems are could also affect fuel economy and drivability. The
operating properly, your vehicle will provide excellent vehicle must be serviced before any emissions
performance and fuel economy, as well as engine emis- tests can be performed.
sions well within current government regulations. • If the MIL is flashing while the engine is running,
If any of these systems require service, the OBD II system severe catalytic converter damage and power loss
will turn on the “Malfunction Indicator Light” (MIL). It will soon occur. Immediate service is required.
will also store diagnostic codes and other information to
assist your service technician in making repairs. Al- Loose Fuel Filler Cap Message
though your vehicle will usually be drivable and not After fuel is added, the vehicle diagnostic system can
need towing, see your authorized dealer for service as determine if the fuel filler cap is possibly loose or 7
soon as possible. improperly installed. A “gASCAP” message will be dis-
played in the instrument cluster. Tighten the gas cap until
a ⬙clicking⬙ sound is heard. This is an indication that the
gas cap is properly tightened. Press the trip odometer
RESET button to turn off the message. If the problem
406 MAINTAINING YOUR VEHICLE
persists, the message will appear the next time the Normally, the OBD II system will be ready. The OBD II
vehicle is started. This might indicate a damaged cap. If system may not be ready if your vehicle was recently
the problem is detected twice in a row, the system will serviced, recently had a dead battery or a battery replace-
turn on the MIL. Resolving the problem will turn the MIL ment. If the OBD II system should be determined not
light off. ready for the I/M test, your vehicle may fail the test.

EMISSIONS INSPECTION AND MAINTENANCE Your vehicle has a simple ignition key-actuated test,
PROGRAMS which you can use prior to going to the test station. To
In some localities, it may be a legal requirement to pass check if your vehicle’s OBD II system is ready, you must
an inspection of your vehicle’s emissions control system. do the following:
Failure to pass could prevent vehicle registration. 1. Turn the ignition switch to the ON position, but do not
For states that require an Inspection and Mainte- crank or start the engine.
nance (I/M), this check verifies the “Malfunction 2. If you crank or start the engine, you will have to start
Indicator Light (MIL)” is functioning and is not this test over.
on when the engine is running, and that the OBD II
system is ready for testing. 3. As soon as you turn the ignition switch to the ON
position, you will see the MIL symbol come on as part of
a normal bulb check.
 MAINTAINING YOUR VEHICLE 407
4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is
happen: ready or not, if the MIL is illuminated during normal
vehicle operation you should have your vehicle serviced
a. The MIL will flash for about 10 seconds and then
before going to the I/M station. The I/M station can fail
return to being fully illuminated until you turn OFF
your vehicle because the MIL is on with the engine
the ignition or start the engine. This means that your
running.
vehicle’s OBD II system is not ready and you should
not proceed to the I/M station. REPLACEMENT PARTS
b. The MIL will not flash at all and will remain fully Use of genuine MOPAR威 parts for normal/scheduled
illuminated until you turn OFF the ignition or start the maintenance and repairs is highly recommended to en-
engine. This means that your vehicle’s OBD II system sure the designed performance. Damage or failures
is ready and you can proceed to the I/M station. caused by the use of non-MOPAR威 parts for maintenance
and repairs will not be covered by the manufacturer’s
If your OBD II system is not ready, you should see your warranty.
authorized dealer or repair facility. If your vehicle was
7
recently serviced or had a battery failure or replacement,
you may need to do nothing more than drive your
vehicle as you normally would in order for your OBD II
system to update. A recheck with the above test routine
may then indicate that the system is now ready.
408 MAINTAINING YOUR VEHICLE
DEALER SERVICE MAINTENANCE PROCEDURES
Your authorized dealer has the qualified service person- The pages that follow contain the required maintenance
nel, special tools, and equipment to perform all service services determined by the engineers who designed your
operations in an expert manner. Service Manuals are vehicle.
available which include detailed service information for
Besides those maintenance items specified in the fixed
your vehicle. Refer to these Service Manuals before
maintenance schedule, there are other components which
attempting any procedure yourself.
may require servicing or replacement in the future.
NOTE: Intentional tampering with emissions control
systems may void your warranty and could result in civil CAUTION!
penalties being assessed against you.
• Failure to properly maintain your vehicle or per-
WARNING! form repairs and service when necessary could
result in more costly repairs, damage to other
You can be badly injured working on or around a components or negatively impact vehicle perfor-
motor vehicle. Only do service work for which you mance. Immediately have potential malfunctions
have the knowledge and the proper equipment. If examined by an authorized Chrysler Group LLC
you have any doubt about your ability to perform a dealership or qualified repair center.
service job, take your vehicle to a competent me- (Continued)
chanic.
 MAINTAINING YOUR VEHICLE 409
fully warmed engine is shut off. Do not check oil level
CAUTION! (Continued)
before starting the engine after it has sat overnight.
• Your vehicle has been built with improved fluids Checking engine oil level when the engine is cold will
that protect the performance and durability of give you an incorrect reading.
your vehicle and also allow extended maintenance
intervals. Do not use chemical flushes in these Checking the oil while the vehicle is on level ground and
components as the chemicals can damage your only when the engine is hot, will improve the accuracy of
engine, transmission, power steering or air condi- the oil level readings. Maintain the oil level between the
tioning. Such damage is not covered by the New range markings on the dipstick. The range markings will
Vehicle Limited Warranty. If a flush is needed consist of a crosshatch zone that says SAFE or a cross-
because of component malfunction, use only the hatch zone that says MIN at the low end of the range and
specified fluid for the flushing procedure. MAX at the high end of the range. Adding 1 qt (1L) of oil
when the reading is at the low end of the indicated range
will result in the oil level at the full end of the indicator
Engine Oil
range.
7
Checking Oil Level
To assure proper engine lubrication, the engine oil must
be maintained at the correct level. Check the oil level at
regular intervals, such as every fuel stop. The best time to
check the engine oil level is about five minutes after a
410 MAINTAINING YOUR VEHICLE
Engine Oil Selection
CAUTION!
For best performance and maximum protection for all
Do not overfill the engine. Overfilling the engine engines under all types of operating conditions, the
will cause oil aeration, which can lead to loss of oil manufacturer recommends engine oils that are API Cer-
pressure and an increase in oil temperature. This tified and meet the requirements of Chrysler Material
could damage your engine. Also, be sure the oil fill Standard MS-6395.
cap is replaced and tightened after adding oil.
American Petroleum Institute (API) Engine Oil
Identification Symbol
Change Engine Oil
This symbol means that the oil has
The oil change indicator system will remind you that it is
been certified by the American
time to take your vehicle in for scheduled maintenance.
Petroleum Institute (API). The
Refer to the “Maintenance Schedule” for the proper
manufacturer only recommends
maintenance intervals.
API Certified engine oils.
NOTE: Under no circumstances should oil change
intervals exceed 8,000 miles (13 000 km) or six months,
whichever occurs first.
 MAINTAINING YOUR VEHICLE 411
Synthetic Engine Oils
CAUTION!
You may use synthetic engine oils provided the recom-
Do not use chemical flushes in your engine oil as the mended oil quality requirements are met, and the recom-
chemicals can damage your engine. Such damage is mended maintenance intervals for oil and filter changes
not covered by the New Vehicle Limited Warranty. are followed.
Materials Added To Engine Oils
Engine Oil Viscosity (SAE Grade)
The manufacturer strongly recommends against the addi-
SAE 5W-20 engine oil is recommended for all operating
tion of any additives (other than leak detection dyes) to
temperatures. This engine oil improves low temperature
the engine oil. Engine oil is an engineered product and its
starting and vehicle fuel economy. Your engine oil filler
performance may be impaired by supplemental additives.
cap also states the recommended engine oil viscosity
grade for your engine. Disposing Of Used Engine Oil And Oil Filters
Care should be taken in disposing of used engine oil and
Lubricants which do not have both the engine oil certi-
fication mark and the correct SAE viscosity grade num-
oil filtersfrom your vehicle. Used oil and oil filters, 7
indiscriminately discarded, can present a problem to the
ber should not be used.
environment. Contact your authorized dealer, service
station, or governmental agency for advice on how and
where used oil and oil filters can be safely discarded in
your area.
412 MAINTAINING YOUR VEHICLE
Engine Oil Filter
WARNING!
The engine oil filter should be replaced with a new filter
at every engine oil change. The air cleaner can provide a measure of protection
in the case of engine backfire. Do not remove the air
Engine Oil Filter Selection
cleaner unless such removal is necessary for repair or
All of this manufacturer’s engines have a full-flow type
maintenance. Make sure that no one is near the
disposable oil filter. Use a filter of this type for replace-
engine compartment before starting the vehicle with
ment. The quality of replacement filters varies consider-
the air cleaner removed. Failure to do so can result in
ably. Only high quality filters should be used to assure
serious personal injury.
most efficient service. MOPAR威 engine oil filters are high
quality oil filters and are recommended.
Engine Air Cleaner Filter Selection
Engine Air Cleaner Filter The quality of replacement engine air cleaner filters
Refer to the “Maintenance Schedule” for the proper varies considerably. Only high quality filters should be
maintenance intervals. used to assure most efficient service. MOPAR威 engine
air cleaner filters are a high quality filter and are
recommended.
 MAINTAINING YOUR VEHICLE 413
Maintenance-Free Battery
WARNING! (Continued)
Your vehicle is equipped with a maintenance-free battery.
You will never have to add water, nor is periodic main- • Battery gas is flammable and explosive. Keep
tenance required. flame or sparks away from the battery. Do not use
a booster battery or any other booster source with
WARNING! an output greater than 12 Volts. Do not allow cable
clamps to touch each other.
• Battery fluid is a corrosive acid solution and can • Battery posts, terminals, and related accessories
burn or even blind you. Do not allow battery fluid contain lead and lead compounds. Wash hands
to contact your eyes, skin, or clothing. Do not lean after handling.
over a battery when attaching clamps. If acid • The battery in this vehicle has a vent hose that
splashes in eyes or on skin, flush the area imme- should not be disconnected and should only be
diately with large amounts of water. Refer to replaced with a battery of the same type (vented).
“Jump-Starting Procedures” in “What To Do In 7
Emergencies” for further information.
(Continued)
414 MAINTAINING YOUR VEHICLE
Air Conditioner Maintenance
CAUTION!
For best possible performance, your air conditioner
• It is essential when replacing the cables on the should be checked and serviced by an authorized dealer
battery that the positive cable is attached to the at the start of each warm season. This service should
positive post and the negative cable is attached to include cleaning of the condenser fins and a performance
the negative post. Battery posts are marked posi- test. Drive belt tension should also be checked at this
tive (+) and negative (-) and are identified on the time.
battery case. Cable clamps should be tight on the
terminal posts and free of corrosion. CAUTION!
• If a “fast charger” is used while the battery is in
Do not use chemical flushes in your air conditioning
the vehicle, disconnect both vehicle battery cables
system as the chemicals can damage your air condi-
before connecting the charger to the battery. Do
tioning components. Such damage is not covered by
not use a “fast charger” to provide starting voltage.
the New Vehicle Limited Warranty.
 MAINTAINING YOUR VEHICLE 415
Refrigerant Recovery And Recycling
WARNING!
R-134a air conditioning refrigerant is a hydrofluoro-
• Use only refrigerants and compressor lubricants carbon (HFC) that is endorsed by the Environmental
approved by the manufacturer for your air condi- Protection Agency and is an ozone-saving product. How-
tioning system. Some unapproved refrigerants are ever, the manufacturer recommends that air conditioning
flammable and can explode, injuring you. Other service be performed by authorized dealers or other
unapproved refrigerants or lubricants can cause service facilities using recovery and recycling equipment.
the system to fail, requiring costly repairs. Refer to
NOTE: Use only manufacturer approved A/C system
Warranty Information Book, located on the DVD,
sealers, stop leak products, seal conditioners, compressor
for further warranty information.
oil, or refrigerants.
• The air conditioning system contains refrigerant
under high pressure. To avoid risk of personal A/C Air Filter
injury or damage to the system, adding refrigerant Refer to the “Maintenance Schedule” for the proper
or any repair requiring lines to be disconnected maintenance intervals. 7
should be done by an experienced repairman.
WARNING!
Do not remove the A/C air filter while the blower is
operating or personal injury may result.
416 MAINTAINING YOUR VEHICLE
The A/C air filter is located in the fresh air inlet behind
the glove box. Perform the following procedure to re-
place the filter:
1. Open the glove compartment and remove all contents.
2. Push in on the sides of the glove compartment and
lower the door.
3. Pivot the glove compartment downward.
4. Disengage the two retaining tabs that secure the filter
cover to the HVAC housing, and remove the cover.

A/C Air Filter Replacement

5. Remove the A/C air filter by pulling it straight out of
the housing.
6. Install the A/C air filter with the arrow on the filter
pointing toward the floor. When installing the filter
cover, make sure the retaining tabs fully engage the
cover.
 MAINTAINING YOUR VEHICLE 417
hood latching components to ensure proper function.
CAUTION!
When performing other underhood services, the hood
The A/C air filter is identified with an arrow to latch, release mechanism and safety catch should be
indicate airflow direction through the filter. Failure cleaned and lubricated.
to properly install the filter will result in the need to
The external lock cylinders should be lubricated twice a
replace it more often.
year, preferably in the Fall and Spring. Apply a small
amount of a high quality lubricant, such as MOPAR威
7. Rotate the glove compartment door back into position.
Lock Cylinder Lubricant or equivalent directly into the
Body Lubrication lock cylinder.
Locks and all body pivot points, including such items as
Windshield Wiper Blades
seat tracks, door hinge pivot points and rollers, liftgate,
Clean the rubber edges of the wiper blades and the
tailgate, sliding doors and hood hinges, should be lubri-
windshield periodically with a sponge or soft cloth and a
cated periodically with a lithium based grease, such as
MOPAR威 Spray White Lube or equivalent to assure
mild, nonabrasive cleaner or use the washer solvent. This 7
will remove accumulations of salt, waxes or road film
quiet, easy operation and to protect against rust and
and help reduce streaking and smearing.
wear. Prior to the application of any lubricant, the parts
concerned should be wiped clean to remove dust and Operation of the wipers on dry glass for long periods
grit; after lubricating excess oil and grease should be may cause deterioration of the wiper blades. Always use
removed. Particular attention should also be given to washer fluid when using the wipers to remove salt or dirt
418 MAINTAINING YOUR VEHICLE
from a dry windshield. Avoid using the wiper blades to When refilling the washer fluid reservoir, take some
remove frost or ice from the windshield. Make sure that washer fluid and apply it to a cloth or towel and wipe
they are not frozen to the glass before turning them on to clean the wiper blades, this will help blade performance.
avoid damaging the blade. Keep the blade rubber out of To prevent freeze-up of your windshield washer system
contact with petroleum products such as engine oil, in cold weather, select a solution or mixture that meets or
gasoline, etc. exceeds the temperature range of your climate. This
rating information can be found on most washer fluid
NOTE: Life expectancy of wiper blades varies depend-
containers.
ing on geographical area and frequency of use. Poor
performance of blades may be present with chattering,
WARNING!
marks, water lines or wet spots. If any of these conditions
are present, clean the wiper blades or replace as Commercially available windshield washer solvents
necessary. are flammable. They could ignite and burn you. Care
must be exercised when filling or working around
Adding Washer Fluid
the washer solution.
The washer fluid reservoir is located in the engine
compartment, and the fluid level should be checked at
regular intervals. Fill the reservoir with windshield
washer solvent only (not radiator antifreeze).
 MAINTAINING YOUR VEHICLE 419
Exhaust System
WARNING!
The best protection against carbon monoxide entry into
the vehicle body is a properly maintained engine exhaust • Exhaust gases can injure or kill. They contain
system. carbon monoxide (CO), which is colorless and
odorless. Breathing it can make you unconscious
If you notice a change in the sound of the exhaust system;
and can eventually poison you. To avoid breathing
or if the exhaust fumes can be detected inside the vehicle;
CO, refer to “Safety Tips/Exhaust Gas” in “Things
or when the underside or rear of the vehicle is damaged;
To Know Before Starting Your Vehicle” for further
have an authorized technician inspect the complete ex-
information.
haust system and adjacent body areas for broken, dam-
aged, deteriorated, or mispositioned parts. Open seams • A hot exhaust system can start a fire if you park
or loose connections could permit exhaust fumes to seep over materials that can burn. Such materials might
into the passenger compartment. In addition, inspect the be grass or leaves coming into contact with your
exhaust system each time the vehicle is raised for lubri- exhaust system. Do not park or operate your ve-
cation or oil change. Replace as required. hicle in areas where your exhaust system can 7
contact anything that can burn.
420 MAINTAINING YOUR VEHICLE
Under normal operating conditions, the catalytic con-
CAUTION!
verter will not require maintenance. However, it is im-
• The catalytic converter requires the use of un- portant to keep the engine properly tuned to assure
leaded fuel only. Leaded gasoline will destroy the proper catalyst operation and prevent possible catalyst
effectiveness of the catalyst as an emissions con- damage.
trol device and may seriously reduce engine per-
NOTE: Intentional tampering with emissions control
formance and cause serious damage to the engine.
systems can result in civil penalties being assessed
• Damage to the catalytic converter can result if your against you.
vehicle is not kept in proper operating condition.
In the event of engine malfunction, particularly In unusual situations involving grossly malfunctioning
involving engine misfire or other apparent loss of engine operation, a scorching odor may suggest severe
performance, have your vehicle serviced promptly. and abnormal catalyst overheating. If this occurs, stop
Continued operation of your vehicle with a severe the vehicle, turn off the engine and allow it to cool.
malfunction could cause the converter to overheat, Service, including a tune-up to manufacturer’s specifica-
resulting in possible damage to the converter and tions, should be obtained immediately.
vehicle.
 MAINTAINING YOUR VEHICLE 421
To minimize the possibility of catalytic converter dam- Cooling System
age:
WARNING!
• Do not shut off the engine or interrupt the ignition,
when the transmission is in gear and the vehicle is in • When working near the radiator cooling fan, dis-
motion. connect the fan motor lead or turn the ignition
switch to the OFF position. The fan is temperature
• Do not try to start the engine by pushing or towing the
controlled and can start at any time the ignition
vehicle.
switch is in the ON position.
• Do not idle the engine with any spark plug wires • You or others can be badly burned by hot coolant
disconnected or removed, such as when diagnostic or steam from your radiator. If you see or hear
testing, or for prolonged periods during very rough steam coming from under the hood, do not open
idle or malfunctioning operating conditions. the hood until the radiator has had time to cool.
Never try to open a cooling system pressure cap 7
when the radiator is hot.

Coolant Checks
Check engine coolant (antifreeze) protection every
12 months (before the onset of freezing weather, where
applicable). If the engine coolant (antifreeze) is dirty or
422 MAINTAINING YOUR VEHICLE
rusty in appearance, the system should be drained, Selection Of Coolant
flushed and refilled with fresh engine coolant (anti- Refer to “Fluids, Lubricants, and Genuine Parts” in
freeze). Check the front of the A/C condenser for any “Maintaining Your Vehicle” for further information.
accumulation of bugs, leaves, etc. If dirty, clean by gently
spraying water from a garden hose vertically down the CAUTION!
face of the condenser.
• Mixing of engine coolant (antifreeze) other than
Check the coolant recovery bottle tubing for brittle rub- specified Hybrid Organic Additive Technology
ber, cracking, tears, cuts and tightness of the connection (HOAT) engine coolant (antifreeze), may result in
at the bottle and radiator. Inspect the entire system for engine damage and may decrease corrosion pro-
leaks. tection. If a non-HOAT engine coolant (antifreeze)
is introduced into the cooling system in an emer-
Cooling System – Drain, Flush, And Refill
gency, it should be replaced with the specified
Refer to the “Maintenance Schedule” for the proper
engine coolant (antifreeze) as soon as possible.
maintenance intervals.
(Continued)
If the engine coolant (antifreeze) is dirty or contains a
considerable amount of sediment, clean and flush with a
reliable cooling system cleaner. Follow with a thorough
rinsing to remove all deposits and chemicals. Properly
dispose of old engine coolant (antifreeze).
 MAINTAINING YOUR VEHICLE 423
Please review these recommendations for using Hybrid
CAUTION! (Continued)
Organic Additive Technology (HOAT) engine coolant
• Do not use water alone or alcohol based engine (antifreeze). When adding engine coolant (antifreeze):
coolant (antifreeze) products. Do not use addi-
tional rust inhibitors or antirust products, as they • The manufacturer recommends using MOPAR威
may not be compatible with the radiator engine Antifreeze/Coolant 5 Year/100,000 Mile Formula
coolant and may plug the radiator. HOAT (Hybrid Organic Additive Technology) or
• This vehicle has not been designed for use with equivalent.
Propylene Glycol based engine coolant (anti- • Mix a minimum solution of 50% HOAT engine coolant
freeze). Use of Propylene Glycol based engine and distilled water. Use higher concentrations (not to
coolant (antifreeze) is not recommended. exceed 70%) if temperatures below ⫺34°F (⫺37°C) are
anticipated.
Adding Coolant
Your vehicle has been built with an improved engine • Use only high purity water such as distilled or deion- 7
coolant (antifreeze) that allows extended maintenance ized water when mixing the water/engine coolant
intervals. This engine coolant (antifreeze) can be used up (antifreeze) solution. The use of lower quality water
to five years or 104,000 miles (169 000 km) before replace- will reduce the amount of corrosion protection in the
ment. To prevent reducing this extended maintenance engine cooling system.
period, it is important that you use the same engine
coolant (antifreeze) throughout the life of your vehicle.
424 MAINTAINING YOUR VEHICLE
Please note that it is the owner’s responsibility to main-
WARNING!
tain the proper level of protection against freezing ac-
cording to the temperatures occurring in the area where • The warning words “DO NOT OPEN HOT” on
the vehicle is operated. the cooling system pressure cap are a safety pre-
caution. Never add engine coolant (antifreeze)
NOTE: Mixing engine coolant (antifreeze) types will
when the engine is overheated. Do not loosen or
decrease the life of the engine coolant (antifreeze) and
remove the cap to cool an overheated engine. Heat
will require more frequent coolant changes.
causes pressure to build up in the cooling system.
Cooling System Pressure Cap To prevent scalding or injury, do not remove the
The cap must be fully tightened to prevent loss of engine pressure cap while the system is hot or under
coolant (antifreeze) and to ensure that engine coolant pressure.
(antifreeze) will return to the radiator from the coolant • Do not use a pressure cap other than the one
recovery bottle. specified for your vehicle. Personal injury or en-
The cap should be inspected and cleaned if there is any gine damage may result.
accumulation of foreign material on the sealing surfaces.
 MAINTAINING YOUR VEHICLE 425
Disposal Of Used Engine Coolant The radiator normally remains completely full, so there is
Used ethylene glycol-based engine coolant (antifreeze) is no need to remove the radiator cap unless checking for
a regulated substance requiring proper disposal. Check the coolant freeze point or replacing the engine coolant
with your local authorities to determine the disposal (antifreeze). Advise your service attendant of this. As
rules for your community. To prevent ingestion by ani- long as the engine operating temperature is satisfactory,
mals or children do not store ethylene glycol-based the coolant bottle need only be checked once a month.
engine coolant (antifreeze) in open containers or allow it
When additional engine coolant (antifreeze) is needed to
to remain in puddles on the ground. If ingested by a child
maintain the proper level, it should be added to the
or pet, seek emergency assistance immediately. Clean up
coolant bottle. Do not overfill.
any ground spills immediately.
Points To Remember
Coolant Level
The coolant bottle provides a quick visual method for NOTE: When the vehicle is stopped after a few miles/
determining that the coolant level is adequate. With the kilometers of operation, you may observe vapor coming
engine idling and warm to normal operating tempera- from the front of the engine compartment. This is nor-
7
ture, the level of the engine coolant (antifreeze) in the mally a result of moisture from rain, snow, or high
bottle should be between the “ADD” and “FULL” lines humidity accumulating on the radiator and being vapor-
shown on the bottle. ized when the thermostat opens, allowing hot engine
coolant (antifreeze) to enter the radiator.
426 MAINTAINING YOUR VEHICLE
If an examination of your engine compartment shows no • Make sure that the radiator and coolant recovery
evidence of radiator or hose leaks, the vehicle may be bottle overflow hoses are not kinked or obstructed.
safely driven. The vapor will soon dissipate.
• Keep the front of the radiator clean. If your vehicle is
• Do not overfill the coolant recovery bottle. equipped with air conditioning, keep the front of the
condenser clean.
• Check the coolant freeze point in the radiator and in
the coolant recovery bottle. If engine coolant (anti- • Do not change the thermostat for Summer or Winter
freeze) needs to be added, the contents of the coolant operation. If replacement is ever necessary, install
recovery bottle must also be protected against freez- ONLY the correct type thermostat. Other designs may
ing. result in unsatisfactory engine coolant (antifreeze)
performance, poor gas mileage, and increased
• If frequent engine coolant (antifreeze) additions are
emissions.
required, or if the level in the coolant recovery bottle
does not drop when the engine cools, the cooling Brake System
system should be pressure tested for leaks. In order to assure brake system performance, all brake
system components should be inspected periodically.
• Maintain engine coolant (antifreeze) concentration at
Refer to the “Maintenance Schedule” for the proper
50% HOAT engine coolant (antifreeze) (minimum)
maintenance intervals.
and distilled water for proper corrosion protection of
your engine which contains aluminum components.
 MAINTAINING YOUR VEHICLE 427
when the pads are replaced. However, low fluid level
WARNING!
may be caused by a leak and a checkup may be needed.
Riding the brakes can lead to brake failure and
NOTE: If your vehicle is equipped with a manual
possibly a collision. Driving with your foot resting or
transmission , the brake fluid reservoir supplies fluid to
riding on the brake pedal can result in abnormally
both the brake system and the clutch release system. The
high brake temperatures, excessive lining wear, and
two systems are separated in the reservoir, and a leak in
possible brake damage. You would not have your full
one system will not affect the other system. The manual
braking capacity in an emergency.
transmission clutch release system should not require
fluid replacement during the life of the vehicle. If the
Brake Master Cylinder
brake fluid reservoir is low and the brake system does
The fluid level in the master cylinder should be checked
not indicate any leaks or other problems, it may be a
when performing under hood services, or immediately if
result of a leak in the hydraulic clutch release system. See
the brake system warning light is on.
your local authorized dealer for service.
Be sure to clean the top of the master cylinder area before
7
Use only manufacturer’s recommended brake fluid. Re-
removing the cap. If necessary, add fluid to bring the
fer to “Fluids, Lubricants, and Genuine Parts” in “Main-
fluid level up to the requirements described on the brake
taining Your Vehicle” for further information.
fluid reservoir. Fluid level can be expected to fall as the
brake pads wear. The brake fluid level should be checked
428 MAINTAINING YOUR VEHICLE

WARNING! WARNING! (Continued)

• Use only manufacturer’s recommended brake • To avoid contamination from foreign matter or
fluid. Refer to “Fluids, Lubricants, and Genuine moisture, use only new brake fluid or fluid that
Parts” in “Maintaining Your Vehicle” for further has been in a tightly closed container. Keep the
information. Using the wrong type of brake fluid master cylinder reservoir cap secured at all times.
can severely damage your brake system and/or Brake fluid in a open container absorbs moisture
impair its performance. The proper type of brake from the air resulting in a lower boiling point.
fluid for your vehicle is also identified on the This may cause it to boil unexpectedly during hard
original factory installed hydraulic master cylin- or prolonged braking, resulting in sudden brake
der reservoir. failure. This could result in a collision.
• Overfilling the brake fluid reservoir can result in
(Continued) spilling brake fluid on hot engine parts, causing
the brake fluid to catch fire. Brake fluid can also
damage painted and vinyl surfaces, care should be
taken to avoid its contact with these surfaces.
(Continued)
 MAINTAINING YOUR VEHICLE 429
Automatic Transmission (CVT) – If Equipped
WARNING! (Continued)
• Do not allow petroleum based fluid to contami- Selection Of Lubricant
nate the brake fluid. Brake seal components could It is important that the proper lubricant is used in the
be damaged, causing partial or complete brake transmission to assure optimum transmission perfor-
failure. This could result in a collision. mance. Use only the manufacturer’s recommended trans-
mission fluid which has been formulated with special
metal to metal friction coefficient additives to provide the
CAUTION! proper steel belt traction on the drive and driven pulleys.
Use of improper brake fluids will affect overall Refer to “Fluids, Lubricants, and Genuine Parts” in
clutch system performance. Improper brake fluids “Maintaining Your Vehicle” for further information.
may damage the clutch system resulting in loss of
clutch function and the ability to shift the transmis- CAUTION!
sion. Using a transmission fluid other than the manufac- 7
turer’s recommended fluid will cause belt slip and
result in a complete transmission failure! Refer to
“Fluids, Lubricants, and Genuine Parts” in “Main-
taining Your Vehicle” for further information.
430 MAINTAINING YOUR VEHICLE
Special Additives level checked immediately. Operation with incorrect
Do not add any materials (other than leak detection dyes) fluid level can cause severe transmission damage.
to Continuously Variable Transmission (CVT) Fluid
Fluid And Filter Changes
(CVTF+4威). CVTF+4威 is an engineered product and its
Refer to the “Maintenance Schedule” for the proper
performance may be impaired by supplemental additives.
maintenance intervals.
CAUTION! Manual Transmission – If Equipped
Do not use chemical flushes in your transmission as Lubricant Selection
the chemicals can damage your transmission compo- Use only the manufacturers recommended transmission
nents. Such damage is not covered by the New fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in
Vehicle Limited Warranty. “Maintaining Your Vehicle” for further information.
Fluid Level Check
Fluid Level Check
Check the fluid level by removing the fill plug. The fluid
Routine fluid level checks are not required. The transmis-
level should be between the bottom of the fill hole and a
sion filler tube is capped and does not include a dipstick.
point not more than 3/16 in (4.7 mm) below the bottom
Your authorized dealer can check the transmission fluid
of the hole.
level using a special service dipstick. Should you notice
fluid leakage or transmission malfunction, have the fluid Add fluid, if necessary, to maintain the proper level.
 MAINTAINING YOUR VEHICLE 431
Frequency Of Fluid Change fill plug. The fluid level should be maintained between
Under normal operating conditions, the fluid installed at the bottom of the fill hole to 1/8 in (4 mm) below the fill
the factory will give satisfactory lubrication for the life of hole.
the vehicle. Fluid changes are not necessary unless lubri-
Add fluid, if necessary, to maintain the proper level.
cant has become contaminated with water.
Frequency Of Fluid Change
NOTE: If contaminated with water, the fluid should be
Refer to the “Maintenance Schedule” for the proper
changed immediately.
maintenance intervals.
Rear Drive Assembly (RDA) – AWD/4WD Models
Power Transfer Unit (PTU) – AWD/4WD Models
Only
Only
Lubricant Selection
Lubricant Selection
Use only the manufacturer’s recommended fluid. Refer
Use only the manufacturer’s recommended fluid. Refer
to “Fluids, Lubricants, and Genuine Parts” in “Maintain-
ing Your Vehicle” for further information.
to “Fluids, Lubricants, and Genuine Parts” in “Maintain- 7
ing Your Vehicle” for further information.
Fluid Level Check
Fluid Level Check
Visually inspect the unit at each oil change for leakage. If
Visually inspected the unit at each oil change for leakage.
leakage is detected, check the fluid level by removing the
If leakage is detected, Check the fluid level by removing
432 MAINTAINING YOUR VEHICLE
the fill plug. The fluid level should be maintained be- hot or cold weather and other extreme conditions will
tween the bottom of the fill hole to 1/8 in (4 mm) below have an adverse effect on paint, metal trim, and under-
the fill hole. body protection.
Add fluid, if necessary, to maintain the proper level. The following maintenance recommendations will enable
you to obtain maximum benefit from the corrosion
Frequency Of Fluid Change
resistance built into your vehicle.
Refer to the “Maintenance Schedule” for the proper
maintenance intervals. What Causes Corrosion?
Corrosion is the result of deterioration or removal of
Appearance Care And Protection From Corrosion
paint and protective coatings from your vehicle.
Protection Of Body And Paint From Corrosion
The most common causes of corrosion are:
Vehicle body care requirements vary according to geo-
graphic locations and usage. Chemicals that make roads • Road salt, dirt and moisture accumulation.
passable in snow and ice and those that are sprayed on
• Stone and gravel impact.
trees and road surfaces during other seasons, are highly
corrosive to the metal in your vehicle. Outside parking, • Insects, tree sap and tar.
which exposes your vehicle to airborne contaminants,
• Salt in the air near sea coast localities.
road surfaces on which the vehicle is operated, extreme
• Atmospheric fallout/industrial pollutants.
 MAINTAINING YOUR VEHICLE 433
Washing
CAUTION!
• Wash your vehicle regularly. Always wash your ve-
• Do not use abrasive or strong cleaning materials
hicle in the shade using MOPAR威 Car Wash or a mild
such as steel wool or scouring powder, which will
car wash soap, and rinse the panels completely with
scratch metal and painted surfaces.
clear water.
• Use of power washers exceeding 1,200 psi
• If insects, tar or other similar deposits have accumu- (8 274 kPa) can result in damage or removal of
lated on your vehicle, use MOPAR威 Super Kleen Bug paint and decals.
and Tar Remover or equivalent to remove.
• Use a high quality cleaner wax, such as MOPAR威 Special Care
Cleaner Wax to remove road film, stains and to protect • If you drive on salted or dusty roads or if you drive
your paint finish. Take care never to scratch the paint. near the ocean, hose off the undercarriage at least once
• Avoid using abrasive compounds and power buffing a month. 7
that may diminish the gloss or thin out the paint • It is important that the drain holes in the lower edges
finish. of the doors, rocker panels and trunk be kept clear and
open.
434 MAINTAINING YOUR VEHICLE
• If you detect any stone chips or scratches in the paint, Wheel And Wheel Trim Care
touch them up immediately. The cost of such repairs is
• All wheels and wheel trim, especially aluminum and
considered the responsibility of the owner.
chrome plated wheels, should be cleaned regularly
• If your vehicle is damaged due to a collision or similar with a mild soap and water to prevent corrosion.
cause which destroys the paint and protective coating,
• To remove heavy soil and/or excessive brake dust, use
have your vehicle repaired as soon as possible. The
MOPAR威 Wheel Cleaner or equivalent or select a
cost of such repairs is considered the responsibility of
non-abrasive, non-acidic cleaner.
the owner.
• If you carry special cargo such as chemicals, fertilizers, CAUTION!
de-icer salt, etc., be sure that such materials are well
Do not use scouring pads, steel wool, a bristle brush,
packaged and sealed.
or metal polishes. Do not use oven cleaner. These
• If a lot of driving is done on gravel roads, consider products may damage the wheel’s protective finish.
mud or stone shields behind each wheel. Avoid automatic car washes that use acidic solutions
or harsh brushes that may damage the wheel’s pro-
• Use MOPAR威 Touch Up Paint or equivalent on
tective finish. Only MOPAR威 Wheel Cleaner or
scratches as soon as possible. Your authorized dealer
equivalent is recommended.
has touch up paint to match the color of your vehicle.
 MAINTAINING YOUR VEHICLE 435
Stain Repel Fabric Cleaning Procedure – If Interior Care
Equipped Use MOPAR威 Total Clean or equivalent to clean fabric
Stain Repel seats may be cleaned in the following man- upholstery and carpeting.
ner:
Use MOPAR威 Total Clean or equivalent to clean vinyl
• Remove as much of the stain as possible by blotting upholstery.
with a clean, dry towel.
MOPAR威 Total Clean or equivalent is specifically recom-
• Blot any remaining stain with a clean, damp towel. mended for leather upholstery.
• For tough stains, apply MOPAR威 Total Clean or a mild Your leather upholstery can be best preserved by regular
soap solution to a clean, damp cloth and remove the cleaning with a damp, soft cloth. Small particles of dirt
stain. Use a fresh, damp towel to remove soap residue. can act as an abrasive and damage the leather upholstery
and should be removed promptly with a damp cloth.
• For grease stains, apply MOPAR威 Multi-Purpose
Stubborn soils can be removed easily with a soft cloth
Cleaner or a equivalent high quality cleaner to a clean,
and MOPAR威 Total Clean or equivalent. Care should be
7
damp cloth and remove the stain. Use a fresh, damp
taken to avoid soaking your leather upholstery with any
towel to remove soap residue.
liquid. Please do not use polishes, oils, cleaning fluids,
• Do not use any harsh solvents or any other form of solvents, detergents, or ammonia based cleaners to clean
protectants on Stain Repel products. your leather upholstery. Application of a leather condi-
tioner is not required to maintain the original condition.
436 MAINTAINING YOUR VEHICLE
Glass Surfaces
WARNING!
All glass surfaces should be cleaned on a regular basis
Do not use volatile solvents for cleaning purposes. with MOPAR威 Glass Cleaner or any commercial
Many are potentially flammable, and if used in household-type glass cleaner. Never use an abrasive type
closed areas, they may cause respiratory harm. cleaner. Use caution when cleaning the inside rear win-
dow equipped with electric defrosters or the right rear
Cleaning Headlights quarter window equipped with the radio antenna. Do
Your vehicle has plastic headlights that are lighter and not use scrapers or other sharp instruments which may
less susceptible to stone breakage than glass headlights. scratch the elements. When cleaning the rearview mirror,
spray cleaner on the towel or rag that you are using. Do
Plastic is not as scratch resistant as glass and, therefore,
not spray cleaner directly on the mirror.
different lens cleaning procedures must be followed.
Instrument Panel Cover
To minimize the possibility of scratching the lenses and
The instrument panel cover has a low glare surface which
reducing light output, avoid wiping with a dry cloth. To
minimizes reflections on the windshield. Do not use
remove road dirt, wash with a mild soap solution fol-
protectants or other products which may cause undesir-
lowed by rinsing.
able reflections. Use soap and warm water to restore the
Do not use abrasive cleaning components, solvents, steel low glare surface.
wool or other aggressive material to clean the lenses.
 MAINTAINING YOUR VEHICLE 437
Instrument Panel Bezels Seat Belt Maintenance
Do not bleach, dye or clean the seat belts with chemical
CAUTION! solvents or abrasive cleaners. This will weaken the fabric.
Sun damage can also weaken the fabric.
When installing hanging air fresheners in your ve-
hicle, read the installation instructions carefully. If the seat belts need cleaning, use a mild soap solution or
Some air fresheners will damage the finish of lukewarm water. Do not remove the seat belts from the
painted or decorated parts if allowed to directly car to wash them. Dry with a soft cloth.
contact any surface.
Replace the seat belts if they appear frayed or worn or if
the buckles do not work properly.
Cleaning Plastic Instrument Cluster Lenses
The lenses in front of the instruments in this vehicle are
molded in clear plastic. When cleaning the lenses, care
must be taken to avoid scratching the plastic.
7
1. Clean with a wet, soft rag. A mild soap solution may be
used, but do not use high alcohol content or abrasive
cleaners. If soap is used, wipe clean with a clean, damp rag.
2. Dry with a soft cloth.
438 MAINTAINING YOUR VEHICLE
FUSES
Integrated Power Module
The Integrated Power Module is located in the engine
compartment near the air cleaner assembly. This center
contains cartridge fuses and mini-fuses. A number that
identifies each component may be displayed on the
inside of the cover. Refer to “Engine Compartment” in
“Maintaining Your Vehicle” for further information.

Integrated Power Module

Cavity Cartridge Mini- Description
Fuse Fuse
1 Empty Empty
2 15 Amp AWD/4WD Control
Lt Blue Module – If Equipped
 MAINTAINING YOUR VEHICLE 439

Cavity Cartridge Mini- Description Cavity Cartridge Mini- Description

Fuse Fuse Fuse Fuse
3 10 Amp Rear Center Brake 9 40 Amp Power Seats
Red Light Switch Green
4 10 Amp Ignition Switch/ 10 20 Amp Power Locks
Red Occupant Classifica- Yellow
tion Module 11 15 Amp Power Outlet
5 20 Amp Trailer Tow – If Lt Blue
Yellow Equipped 12 20 Amp AC Inverter
6 10 Amp Power Mirror/Airbag Yellow
Red Occupant Classifica- 13 20 Amp Rear Power Supply
tion Module/Steering Yellow Outlet
Control Satellite 14 10 Amp Instrument Cluster/
Radio (If Equipped) Red Interior Lighting
7
7 30 Amp Ignition Off Draw 15 40 Amp Radiator Fan
Green Green
8 30 Amp Ignition Off Draw 16 15 Amp Sunroof/Cigar
Green Lt Blue Lighter (If Equipped)
440 MAINTAINING YOUR VEHICLE

Cavity Cartridge Mini- Description Cavity Cartridge Mini- Description

Fuse Fuse Fuse Fuse
17 10 Amp Wireless Control 25 10 Amp Heated Mirror – If
Red Module Red Equipped
18 40 Amp Auto Shutdown Relay 26 15 Amp Auto Shutdown Relay
Green Lt Blue
19 20 Amp Radio Amplifiers 27 10 Amp Airbag Control
Yellow Red Module
20 15 Amp Radio 28 10 Amp Airbag Control
Lt Blue Red Module/Occupant
21 10 Amp Intrusion Module/ Classification Module
Red Siren – If Equipped 29 Hot Car (No Fuse
22 10 Amp Heating, AC/ Required)
Red Compass 30 20 Amp Heated Seat – If
23 15 Amp Auto Shutdown Relay Yellow Equipped
Lt Blue 31 10 Amp Headlamp Washer –
24 15 Amp Power Sunroof – If Red If Equipped
Lt Blue Equipped 32 30 Amp Auto Shutdown Relay
Pink
 MAINTAINING YOUR VEHICLE 441

Cavity Cartridge Mini- Description CAUTION!

Fuse Fuse
33 10 Amp ABS Module/J1962 • When installing the IPM cover, it is important to
Red Diagnostic Link/ ensure the cover is properly positioned and fully
Powertrain Control latched. Failure to do so may allow water to get
Module into the IPM, and possibly result in an electrical
34 30 Amp Antilock BrakeValve system failure.
Pink • When replacing a blown fuse, it is important to
35 40 Amp Antilock Brake Pump use only a fuse having the correct amperage rating.
Green The use of a fuse with a rating other than indicated
36 30 Amp Headlamp/Washer may result in a dangerous electrical system over-
Pink Control/Smart Glass load. If a properly rated fuse continues to blow, it
– If Equipped indicates a problem in the circuit that must be
37 25 Amp 110 Inverter – If corrected. 7
Natural Equipped/Diesel Fuel
Heater – If Equipped
442 MAINTAINING YOUR VEHICLE
VEHICLE STORAGE REPLACEMENT BULBS
If you will not be using your vehicle for more than All the inside bulbs are brass or glass wedge base.
21 days, you may want to take steps to preserve your Aluminum base bulbs are not approved and should not
battery. be used for replacement.
• Disengage the mini-fuse in the Power Distribution
Center labeled IOD (Ignition Off-Draw). LIGHT BULBS – Interior Bulb Number
Front Header Lamp . . . . . . . . . . . . . . . . . . . . . . T578
• Or disconnect the negative cable from the battery. Center Dome Lamp . . . . . . . . . . . . . . . . . . . . . . T578
• Anytime you store your vehicle, or keep it out of Rear Cargo Lamp/Flashlight . . . . . . . . . . . . . 8–A35LF
service (i.e., vacation) for two weeks or more, run the
air conditioning system at idle for about five minutes LIGHTS BULBS – Exterior Bulb No.
in the fresh air and high blower setting. This will Low Beam Headlamp . . . . . . . . . . . . . . . . . . . . . H11
ensure adequate system lubrication to minimize the High Beam Headlamp . . . . . . . . . . . . . . . . . . . . 9005
possibility of compressor damage when the system is Front Park/Turn Signal Lamp . . . . . . . . . . . . 7444NA
started again. Front Side Marker Lamp . . . . . . . . . . . . . . . . . . . 194
 MAINTAINING YOUR VEHICLE 443

LIGHTS BULBS – Exterior Bulb No. 3. Remove green connector from back of bulb by pulling
Front Fog Lamp . . . . . . . . . . . . . . . . . . . . . . . . . H11 straight back.
Center High Mounted Stop 4. Twist the bulb to the left.
Lamp (CHMSL) . . . . . . . . . . . . . . . . . . LED Assembly
(Serviced at Authorized Dealer) 5. Pull bulb outward from assembly.
Rear Tail/Stop Lamp . . . . . . . . . . . . . . . . . . . . . LED
NOTE: These are halogen bulbs. Take care not to touch
(Serviced at Authorized Dealer)
the bulb with your fingers. Body oils from your fingers
Rear Turn Lamp . . . . . . . . . . 7440NA (WY21W) Amber
Backup Lamp . . . . . . . . . . . . . . . 7440 (W21W) Crystal could cause excessive heat buildup which reduces bulb
License Lamp. . . . . . . . . . . . . . . . . . . . . . . . . . W5W life.
Fog Lamps
BULB REPLACEMENT
1. Access lamp through the lower fascia cutout.
Headlamps
1. Raise the hood and locate the connector behind the 2. Remove electrical connector from bulb. 7
headlamp. 3. Remove bulb from housing.
2. Reach into the engine compartment and pull the red
lock out at the green connector.
444 MAINTAINING YOUR VEHICLE
Rear Turn Signal And Backup Lamp 3. Twist and remove socket from lamp.
1. Remove the two push-pins from the taillamp housing. 4. Remove bulb from socket and replace.
License Lamps
1. Use a screw driver to gently pry against the side of the
snap tab to remove the lamp from the liftgate.
2. Rotate the socket 1/4 turn counterclockwise.
3. Pull bulb from socket.
Center High-Mounted Stoplamp
This light is an LED assembly. See your authorized dealer
for replacement.

2. Grasp the taillamp and pull firmly to disengage the

lamp from the aperture panel.
 MAINTAINING YOUR VEHICLE 445
FLUID CAPACITIES
U.S. Metric
Fuel (Approximate) 13.6 Gallons 51.5 Liters
Engine Oil with Filter
2.0L and 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 4.26 Liters
Cooling System *
2.0L and 2.4L Engine (MOPAR威 Engine Coolant/Antifreeze 7.2 Quarts 6.8 Liters
5 Year/100,000 Mile Formula or equivalent)
* Includes heater and coolant recovery bottle filled to MAX level.

7
446 MAINTAINING YOUR VEHICLE
FLUIDS, LUBRICANTS, AND GENUINE PARTS
Engine
Component Fluid, Lubricant, or Genuine Part
Engine Coolant MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT
(Hybrid Organic Additive Technology) or equivalent.
Engine Oil Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of
Chrysler Material Standard MS-6395. Refer to your engine oil filler cap
for correct SAE grade.
Engine Oil Filter MOPAR威 Engine Oil Filter or equivalent.
Spark Plugs ZFR5F-11 (Gap 0.043 in [1.1 mm])
Fuel Selection 87 Octane
 MAINTAINING YOUR VEHICLE 447
Chassis
Component Fluid, Lubricant, or Genuine Part
Automatic Transmission (CVT) – MOPAR威 CVTF+4威 Continuously Variable Transmission Fluid
If Equipped
Manual Transmission – If Equipped MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed
ATF+4威 product.
Rear Drive Assembly (RDA) MOPAR威 Gear & Axle Lubricant SAE 80W-90 API GL 5 or equivalent
non-synthetic product.
Power Transfer Unit (PTU) MOPAR威 Gear & Axle Lubricant SAE 80W-90 API GL 5 or equivalent
non-synthetic product.
Brake Master Cylinder MOPAR威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake
fluid is not available, then DOT 4 is acceptable. Use only recommended
brake fluids or equivalent.
7
Power Steering Reservoir MOPAR威 Power Steering Fluid +4, MOPAR威 ATF+4威 Automatic Trans-
mission Fluid or equivalent licensed ATF+4威 product.
 M
A
MAINTENANCE SCHEDULES I
N
T
E
N
CONTENTS A
N
C
䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 450 E

▫ Required Maintenance Intervals . . . . . . . . . . 452 S

C
H
E
D
U
L
E
S
8
M 450 MAINTENANCE SCHEDULES
A
I MAINTENANCE SCHEDULE On Non-EVIC equipped vehicles, “Change Oil” will flash
N The Scheduled Maintenance services listed in this in the instrument cluster odometer and a single chime
T manual must be done at the times or mileages specified will sound, indicating that an oil change is necessary.
E
N to protect your vehicle warranty and ensure the best
Based on engine operation conditions, the oil change
A vehicle performance and reliability. More frequent main-
N indicator message will illuminate. This means that ser-
tenance may be needed for vehicles in severe operating
C vice is required for your vehicle. Operating conditions
E conditions, such as dusty areas and very short trip
such as frequent short-trips, trailer tow, extremely hot or
driving. Inspection and service should also be done
S anytime a malfunction is suspected. cold ambient temperatures, and E85 fuel usage will
C influence when the “Change Oil” message is displayed.
H Your vehicle is equipped with an automatic oil change Depending on operating conditions, the message may
E
D indicator system. The oil change indicator system will appear as early as 3,500 miles (5 630 km) since last reset.
U remind you that it is time to take your vehicle in for Have your vehicle serviced as soon as possible, within
L scheduled maintenance. the next 500 miles (805 km).
E
S On Electronic Vehicle Information Center (EVIC)
8 equipped vehicles, “Oil Change Required” will be dis-
played in the EVIC and a single chime will sound,
indicating that an oil change is necessary.
 MAINTENANCE SCHEDULES 451 M
A
NOTE: referring to the steps described under “Electronic Vehicle I
• The oil change indicator message will not monitor the Information Center (EVIC)/Oil Change Required” in N
time since the last oil change. Change your vehicle’s “Understanding Your Instrument Panel” or under “In- T
E
oil if it has been six months since your last oil change, strument Cluster Description/Odometer/Trip Odom- N
even if the oil change indicator message is NOT eter” in “Understanding Your Instrument Panel” for A
illuminated. further information. N
C
• Change your engine oil more often if you drive your At Each Stop For Fuel E
vehicle off-road for an extended period of time. S
• Check the engine oil level about five minutes after a
C
• Under no circumstances should oil change intervals fully warmed engine is shut off. Checking the oil level H
exceed 8,000 miles (13 000 km) or six months, which- while the vehicle is on level ground will improve the E
ever comes first. accuracy of the oil level reading. Add oil only when D
U
the level is at or below the ADD or MIN mark. L
Your authorized dealer will reset the oil change indicator
E
message after completing the scheduled oil change. If a • Check the windshield washer solvent and add if S
scheduled oil change is performed by someone other required. 8
than your authorized dealer, the message can be reset by
M 452 MAINTENANCE SCHEDULES
A
I Once A Month At Each Oil Change
N
T • Check the tire pressure and look for unusual wear or • Change the engine oil filter.
E damage.
N • Inspect the brake hoses and lines.
A • Inspect the battery and clean and tighten the terminals
N as required. CAUTION!
C
E • Check the fluid levels of coolant reservoir, brake Failure to perform the required maintenance items
S master cylinder, and power steering and add as may result in damage to the vehicle.
C needed.
H Required Maintenance Intervals
E • Check all lights and other electrical items for correct
D Refer to the Maintenance Schedules on the following
operation.
U pages for the required maintenance intervals.
L
E
S
8
 MAINTENANCE SCHEDULES 453 M
A
8,000 Miles (13,000 km) or 16,000 Miles (26,000 km) or 12 Months Maintenance Service I
N
6 Months Maintenance Service Schedule T
Schedule ❏ Change the engine oil and engine oil filter. E
❏ Change the engine oil and engine oil ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before N
filter. 16,000 miles (26 000 km). A
❏ Rotate the tires, rotate at the first sign of ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the N
irregular wear, even if it occurs before engine air cleaner filter; replace if necessary. C
❏ Replace the air conditioning filter. E
8,000 miles (13 000 km).
❏ Inspect the brake linings, replace if necessary.
S
❏ Inspect exhaust system. Perform the first inspection at 16,000 miles (26 000 km) or
C
12 months. H
❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for E
damage, wear, improper looseness or end play; replace if necessary. D
U
L
E
S
Odometer Reading Date Odometer Reading Date
8
Repair Order # Dealer Code Repair Order # Dealer Code

Signature, Authorized Service Center Signature, Authorized Service Center

M 454 MAINTENANCE SCHEDULES
A
I 24,000 Miles (39,000 km) or 32,000 Miles (52,000 km) or 24 Months Maintenance Service
N
T 18 Months Maintenance Schedule
E Service Schedule ❏ Change the engine oil and engine oil filter.
N ❏ Change the engine oil and engine oil ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before
A filter. 32,000 miles (52 000 km).
N ❏ Rotate the tires, rotate at the first sign of ❏ Replace the engine air cleaner filter.
C irregular wear, even if it occurs before ❏ Replace the spark plugs.
E ❏ Replace the air conditioning filter.
24,000 miles (39 000 km).
❏ Inspect the CV joints. ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
S
❏ Inspect exhaust system. ❏ Inspect the brake linings, replace if necessary.
C
H ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for
E damage, wear, improper looseness or end play; replace if necessary.
D
U
L
E
S
8 Odometer Reading Date Odometer Reading Date

Repair Order # Dealer Code Repair Order # Dealer Code

Signature, Authorized Service Center Signature, Authorized Service Center

 MAINTENANCE SCHEDULES 455 M
A
40,000 Miles (65,000 km) or 48,000 Miles (78,000 km) or 36 Months Maintenance Service I
N
30 Months Maintenance Schedule T
Service Schedule ❏ Change the engine oil and engine oil filter. E
❏ Change the engine oil and engine oil ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before N
filter. 48,000 miles (78 000 km). A
❏ Rotate the tires, rotate at the first sign of ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the N
irregular wear, even if it occurs before engine air cleaner filter; replace if necessary. C
❏ Replace the air conditioning filter. E
40,000 miles (65 000 km).
❏ Inspect the brake linings, replace if necessary.
S
❏ Inspect the CV joints.
C
❏ Inspect exhaust system. H
❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for E
damage, wear, improper looseness or end play; replace if necessary. D
❏ Change the manual transmission fluid if using your vehicle for any of the following: trailer U
towing, heavy loading, taxi, police, delivery service (commercial service), off-road, desert L
operation or more than 50% of your driving is at sustained speeds during hot weather, above E
90°F (32°C). S
Odometer Reading Date Odometer Reading Date
8
Repair Order # Dealer Code Repair Order # Dealer Code

Signature, Authorized Service Center Signature, Authorized Service Center

M 456 MAINTENANCE SCHEDULES
A
I 56,000 Miles (91,000 km) or 64,000 Miles (104,000 km) or 48 Months Maintenance Service
N
T 42 Months Maintenance Schedule
E Service Schedule ❏ Change the engine oil and engine oil filter.
N ❏ Change the engine oil and engine oil ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before
A filter. 64,000 miles (104 000 km).
N ❏ Rotate the tires, rotate at the first sign of ❏ Replace the engine air cleaner filter.
C irregular wear, even if it occurs before ❏ Replace the air conditioning filter.
E ❏ Inspect the brake linings; replace if necessary.
56,000 miles (91 000 km).
❏ Replace the spark plugs.
S
❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
C
H ❏ Replace rear drive assembly (RDA) fluid.
E ❏ Replace power transfer unit (PTU) fluid.
D ❏ Change the automatic transmission fluid and filter if using your vehicle for any of the
U following: police, taxi, fleet, or frequent trailer towing.
L ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for
E damage, wear, improper looseness or end play; replace if necessary.
S
8 Odometer Reading Date Odometer Reading Date

Repair Order # Dealer Code Repair Order # Dealer Code

Signature, Authorized Service Center Signature, Authorized Service Center

 MAINTENANCE SCHEDULES 457 M
A
72,000 Miles (117,000 km) or 80,000 Miles (130,000 km) or 60 Months Maintenance Service I
N
54 Months Maintenance Schedule T
Service Schedule ❏ Change the engine oil and engine oil filter. E
❏ Change the engine oil and engine oil ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before N
filter. 80,000 miles (130 000 km). A
❏ Rotate the tires, rotate at the first sign of ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the N
irregular wear, even if it occurs before engine air cleaner filter; replace if necessary. C
❏ Replace the air conditioning filter. E
72,000 miles (117 000 km).
❏ Inspect the CV joints. ❏ Flush and replace the engine coolant at 60 months or 104,000 miles (169 000 km) whichever
S
❏ Inspect exhaust system. comes first.
C
❏ Inspect the brake linings, replace if necessary. H
❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for E
damage, wear, improper looseness or end play; replace if necessary. D
U
L
E
S
Odometer Reading Date Odometer Reading Date
8
Repair Order # Dealer Code Repair Order # Dealer Code

Signature, Authorized Service Center Signature, Authorized Service Center

M 458 MAINTENANCE SCHEDULES
A
I 88,000 Miles (143,000 km) or
N
T 66 Months Maintenance
E Service Schedule
N ❏ Change the engine oil and engine oil
A filter.
N ❏ Rotate the tires, rotate at the first sign of
C irregular wear, even if it occurs before
E
88,000 miles (143 000 km).
S
C
H
E
D
U
L
E
S
8 Odometer Reading Date

Repair Order # Dealer Code

Signature, Authorized Service Center

 MAINTENANCE SCHEDULES 459 M
A
96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule I
❏ Change the engine oil and engine oil filter. N
T
❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km).
E
❏ Replace the engine air cleaner filter. N
❏ Replace the spark plugs. A
❏ Inspect and replace PCV valve if necessary. N
❏ Replace the air conditioning filter. C
❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. E
❏ Inspect the brake linings, replace if necessary.
❏ Inspect the CV joints. S
❏ Inspect exhaust system. C
H
❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play;
E
replace if necessary. D
❏ Change the manual transmission fluid if using your vehicle for any of the following: trailer towing, heavy loading, taxi, police, delivery service U
(commercial service), off-road, desert operation or more than 50% of your driving is at sustained speeds during hot weather, above 90°F (32°C). L
E
S
Odometer Reading Date
8
Repair Order # Dealer Code

Signature, Authorized Service Center

M 460 MAINTENANCE SCHEDULES
A
I 104,000 Miles (169,000 km) or 112,000 Miles (182,000 km) or 84 Months Maintenance Service
N
T 78 Months Maintenance Schedule
E Service Schedule ❏ Change the engine oil and engine oil filter.
N ❏ Change the engine oil and engine oil ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before
A filter. 112,000 miles (182 000 km).
N ❏ Rotate the tires, rotate at the first sign of ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the
C irregular wear, even if it occurs before engine air cleaner filter; replace if necessary.
E ❏ Replace the air conditioning filter.
104,000 miles (169 000 km).
❏ Flush and replace the engine coolant at ❏ Inspect the brake linings, replace if necessary.
S
104,000 miles (169 000 km) or 60 months ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for
C
H whichever comes first. damage, wear, improper looseness or end play; replace if necessary.
E
D
U
L
E
S
8 Odometer Reading Date Odometer Reading Date

Repair Order # Dealer Code Repair Order # Dealer Code

Signature, Authorized Service Center Signature, Authorized Service Center

 MAINTENANCE SCHEDULES 461 M
A
120,000 Miles (195,000 km) or 128,000 Miles (208,000 km) or 96 Months Maintenance Service I
N
90 Months Maintenance Schedule T
Service Schedule ❏ Change the engine oil and engine oil filter. E
❏ Change the engine oil and engine oil ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before N
filter. 128,000 miles (208 000 km). A
❏ Rotate the tires, rotate at the first sign of ❏ Replace the engine air cleaner filter. N
irregular wear, even if it occurs before ❏ Replace the spark plugs. C
❏ Replace the air conditioning filter. E
120,000 miles (195 000 km).
❏ Inspect the CV joints. ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
S
❏ Inspect exhaust system. ❏ Inspect the brake linings, replace if necessary.
C
❏ Change the automatic transmission fluid ❏ Replace rear drive assembly (RDA) fluid. H
and filter(s). ❏ Replace power transfer unit (PTU) fluid. E
❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for D
damage, wear, improper looseness or end play; replace if necessary. U
L
E
S
Odometer Reading Date Odometer Reading Date
8
Repair Order # Dealer Code Repair Order # Dealer Code

Signature, Authorized Service Center Signature, Authorized Service Center

M 462 MAINTENANCE SCHEDULES
A
I 136,000 Miles (221,000 km) or 144,000 Miles (234,000 km) or 108 Months Maintenance Service
N
T 102 Months Maintenance Schedule
E Service Schedule ❏ Change the engine oil and engine oil filter.
N ❏ Change the engine oil and engine oil ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before
A filter. 144,000 miles (234 000 km).
N ❏ Rotate the tires, rotate at the first sign of ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the
C irregular wear, even if it occurs before engine air cleaner filter; replace if necessary.
E ❏ Replace the air conditioning filter.
136,000 miles (221 000 km).
❏ Inspect the brake linings, replace if necessary.
S
❏ Inspect the CV joints.
C
H ❏ Inspect exhaust system.
E ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for
D damage, wear, improper looseness or end play; replace if necessary.
U ❏ Change the manual transmission fluid if using your vehicle for any of the following: trailer
L towing, heavy loading, taxi, police, delivery service (commercial service), off-road, desert
E operation or more than 50% of your driving is at sustained speeds during hot weather, above
S 90°F (32°C).
8 Odometer Reading Date Odometer Reading Date

Repair Order # Dealer Code Repair Order # Dealer Code

Signature, Authorized Service Center Signature, Authorized Service Center

 MAINTENANCE SCHEDULES 463 M
A
152,000 Miles (247,000 km) or I
N
114 Months Maintenance T
Service Schedule E
❏ Change the engine oil and engine oil N
filter. A
❏ Rotate the tires, rotate at the first sign of N
irregular wear, even if it occurs before C
E
152,000 miles (247 000 km).
S
C
H
E
D
U
L
E
S
Odometer Reading Date
8
Repair Order # Dealer Code

Signature, Authorized Service Center

M 464 MAINTENANCE SCHEDULES
A
I WARNING!
N
T • You can be badly injured working on or around a
E
N motor vehicle. Do only service work for which you
A have the knowledge and the right equipment. If
N you have any doubt about your ability to perform
C
E a service job, take your vehicle to a competent
mechanic.
S
C • Failure to properly inspect and maintain your
H vehicle could result in a component malfunction
E and effect vehicle handling and performance. This
D
U could cause an accident.
L
E
S
8
 IF YOU NEED CONSUMER ASSISTANCE

CONTENTS
䡵 Suggestions For Obtaining Service For Your ▫ Customer Assistance For The Hearing Or
Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 467 Speech Impaired (TDD/TTY) . . . . . . . . . . . . 469
▫ Prepare For The Appointment . . . . . . . . . . . 467 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 469
▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 467 䡵 Warranty Information . . . . . . . . . . . . . . . . . . 470
▫ Be Reasonable With Requests . . . . . . . . . . . . 467 䡵 MOPAR威 Parts . . . . . . . . . . . . . . . . . . . . . . . 470
䡵 If You Need Assistance . . . . . . . . . . . . . . . . . 467 䡵 Reporting Safety Defects . . . . . . . . . . . . . . . . 470
▫ Chrysler Group LLC Customer Center . . . . . 468 ▫ In The 50 United States And
Washington, D.C. . . . . . . . . . . . . . . . . . . . . 470
▫ Chrysler Canada Inc. Customer Center . . . . . 468
▫ In Canada . . . . . . . . . . . . . . . . . . . . . . . . . 471
9
▫ In Mexico Contact . . . . . . . . . . . . . . . . . . . . 468
䡵 Publication Order Forms . . . . . . . . . . . . . . . . 471
466 IF YOU NEED CONSUMER ASSISTANCE
䡵 Department Of Transportation Uniform Tire ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 473
Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 473
▫ Temperature Grades . . . . . . . . . . . . . . . . . . 474
▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 473
 IF YOU NEED CONSUMER ASSISTANCE 467
SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority.
YOUR VEHICLE At many authorized dealers, you may obtain a rental
vehicle at a minimal daily charge. If you need a rental, it
Prepare For The Appointment
is advisable to make these arrangements when you call
If you’re having warranty work done, be sure to have the
for an appointment.
right papers with you. Take your warranty folder. All
work to be performed may not be covered by the IF YOU NEED ASSISTANCE
warranty. Discuss additional charges with the service The manufacturer and its authorized dealers are vitally
manager. Keep a maintenance log of your vehicle’s interested in your satisfaction. We want you to be happy
service history. This can often provide a clue to the with our products and services.
current problem.
Warranty service must be done by an authorized dealer.
Prepare A List We strongly recommend that you take the vehicle to an
Make a written list of your vehicle’s problems or the authorized dealer. They know your vehicle the best, and
specific work you want done. If you’ve had an accident are most concerned that you get prompt and high quality
or work done that is not on your maintenance log, let the service. The manufacturer’s authorized dealers have the
service advisor know. facilities, factory-trained technicians, special tools, and
Be Reasonable With Requests the latest information to ensure the vehicle is fixed
9
If you list a number of items and you must have your correctly and in a timely manner.
vehicle by the end of the day, discuss the situation with
468 IF YOU NEED CONSUMER ASSISTANCE
This is why you should always talk to an authorized Chrysler Group LLC Customer Center
dealer’s service manager first. Most matters can be re- P.O. Box 21–8004
solved with this process. Auburn Hills, MI 48321–8004
Phone: (877) 426–5337
• If for some reason you are still not satisfied, talk to the
general manager or owner of the authorized dealer- Chrysler Canada Inc. Customer Center
ship. They want to know if you need assistance. P.O. Box 1621
Windsor, Ontario N9A 4H6
• If an authorized dealership is unable to resolve the
Phone: (800) 465–2001 English / (800) 387–9983 French
concern, you may contact the manufacturer’s customer
center. In Mexico contact:
Av. Prolongacion Paseo de la Reforma, 1240
Any communication to the manufacturer’s customer cen-
Sante Fe C.P. 05109
ter should include the following information:
Mexico, D. F.
• Owner’s name and address In Mexico City: 5081-7568
Outside Mexico City: 1-800-505-1300
• Owner’s telephone number (home and office)
• Authorized dealership name
• Vehicle Identification Number (VIN)
• Vehicle delivery date and mileage
 IF YOU NEED CONSUMER ASSISTANCE 469
Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a
Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan
To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail
manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date. If you
cation Devices for the Deaf) equipment at its customer have any questions about the service contract, call the
center. Any hearing or speech impaired customer, who manufacturer’s Service Contract National Customer
has access to a TDD or a conventional teletypewriter Hotline at 1-800-521-9922 (Canadian residents, call (800)
(TTY) in the United States, can communicate with the 465–2001 English / (800) 387–9983 French).
manufacturer by dialing 1–800–380–CHRY.
The manufacturer will not stand behind any service
Canadian residents with hearing difficulties that require
contract that is not the manufacturer’s service contract. It
assistance can use the special needs relay service offered
is not responsible for any service contract other than the
by Bell Canada. For TTY teletypewriter users, dial 711
manufacturer’s service contract. If you purchased a ser-
and for Voice callers, dial 1 800 855-0511 to connect with
vice contract that is not a manufacturer’s service contract,
a Bell Relay Service operator.
and you require service after the manufacturer’s New
Service Contract Vehicle Limited Warranty expires, please refer to the
You may have purchased a service contract for a vehicle contract documents, and contact the person listed in
to help protect you from the high cost of unexpected those documents. 9
repairs after the manufacturer’s New Vehicle Limited
Warranty expires. The manufacturer stands behind only
470 IF YOU NEED CONSUMER ASSISTANCE
We appreciate that you have made a major investment WARRANTY INFORMATION
when you purchased the vehicle. An authorized dealer See the Warranty Information Booklet, located on the
has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group
training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
the ownership experience. You’ll be pleased with their
sincere efforts to resolve any warranty issues or related MOPAR姞 PARTS
concerns. MOPAR威 fluids, lubricants, parts, and accessories are
available from an authorized dealer. They are recom-
WARNING! mended for your vehicle in order to help keep the vehicle
operating at its best.
Engine exhaust, some of its constituents, and certain
vehicle components contain, or emit, chemicals REPORTING SAFETY DEFECTS
known to the State of California to cause cancer and
In the 50 United States and Washington, D.C.
birth defects, or other reproductive harm. In addi-
If you believe that your vehicle has a defect that could
tion, certain fluids contained in vehicles and certain
cause a crash or cause injury or death, you should
products of component wear contain, or emit, chemi-
immediately inform the National Highway Traffic Safety
cals known to the State of California to cause cancer
Administration (NHTSA) in addition to notifying the
and birth defects, or other reproductive harm.
manufacturer.
 IF YOU NEED CONSUMER ASSISTANCE 471
If NHTSA receives similar complaints, it may open an In Canada
If you believe that your vehicle has a safety defect,
investigation, and if it finds that a safety defect exists in
a group of vehicles, it may order a recall and remedy you should contact the Customer Service Department
campaign. However, NHTSA cannot become involved in immediately. Canadian customers who wish to report a
individual problems between you, your authorized safety defect to the Canadian government should contact
dealer, and the manufacturer. Transport Canada, Motor Vehicle Defect Investigations
and Recalls at 1-800-333-0510 or go to
To contact NHTSA, you may either call the Auto Safety
http://www.tc.gc.ca/roadsafety/
Hotline toll free at 1–888–327–4236 (TTY: 1–800–424–
9153), or go to http://www.safercar.gov; or write to: PUBLICATION ORDER FORMS
Administrator, NHTSA, 1200 New Jersey Avenue, SE., To order the following manuals, you may use either the
West Building, Washington, D.C. 20590. You can also website or the phone numbers listed below. Visa, Mas-
obtain other information about motor vehicle safety from tercard, American Express, and Discover orders are ac-
http://www.safercar.gov. cepted. If you prefer mailing your payment, please call
for an order form.
NOTE: A street address is required when ordering
manuals (no P.O. Boxes).
9
472 IF YOU NEED CONSUMER ASSISTANCE
• Service Manuals • Owner’s Manuals
These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the
information that students and professional technicians assistance of service and engineering specialists to
need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC ve-
maintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency
LLC vehicles. A complete working knowledge of the and maintenance procedures as well as specifications,
vehicle, system, and/or components is written in capabilities and safety tips.
straightforward language with illustrations, diagrams,
and charts. Call toll free at:
• Diagnostic Procedure Manuals • 1–800–890–4038 (U.S.)
Diagnostic Procedure Manuals are filled with dia- • 1–800–387–1143 (Canada)
grams, charts and detailed illustrations. These practi-
cal manuals make it easy for students and technicians Or
to find and fix problems on computer-controlled ve- Visit us on the Worldwide Web at:
hicle systems and features. They show exactly how to
find and correct problems the first time, using step-by- • www.techauthority.com
step troubleshooting and drivability procedures,
proven diagnostic tests and a complete list of all tools
and equipment.
 IF YOU NEED CONSUMER ASSISTANCE 473
DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving
TIRE QUALITY GRADES habits, service practices, and differences in road charac-
The following tire grading categories were established by teristics and climate.
the National Highway Traffic Safety Administration. The
Traction Grades
specific grade rating assigned by the tire’s manufacturer
The Traction grades, from highest to lowest, are AA, A, B,
in each category is shown on the sidewall of the tires on
and C. These grades represent the tire’s ability to stop on
your vehicle.
wet pavement, as measured under controlled conditions
All passenger car tires must conform to Federal safety on specified government test surfaces of asphalt and
requirements in addition to these grades. concrete. A tire marked C may have poor traction perfor-
mance.
Treadwear
The Treadwear grade is a comparative rating, based on
WARNING!
the wear rate of the tire when tested under controlled
conditions on a specified government test course. For The traction grade assigned to this tire is based on
example, a tire graded 150 would wear one and one-half straight-ahead braking traction tests, and does not
times as well on the government course as a tire graded include acceleration, cornering, hydroplaning, or
100. The relative performance of tires depends upon the peak traction characteristics.
actual conditions of their use, however, and may depart 9
474 IF YOU NEED CONSUMER ASSISTANCE
Temperature Grades
WARNING!
The temperature grades are A (the highest), B, and C,
representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for
and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
controlled conditions on a specified indoor laboratory Excessive speed, under-inflation, or excessive load-
test wheel. Sustained high temperature can cause the ing, either separately or in combination, can cause
material of the tire to degenerate and reduce tire life, and heat buildup and possible tire failure.
excessive temperature can lead to sudden tire failure. The
grade C corresponds to a level of performance, which all
passenger car tires must meet under the Federal Motor
Vehicle Safety Standard No. 109. Grades B and A repre-
sent higher levels of performance on the laboratory test
wheel, than the minimum required by law.
INDEX

10
476 INDEX
ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . 314 Airbag, Window (Side Curtain) . . . . . . . . . . . 65,67,70
Adding Engine Coolant (Antifreeze) . . . . . . . . . . 423 Alarm Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 Alarm System (Security Alarm) . . . . . . . . . . . . . . . 18
Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 418 Alterations/Modifications, Vehicle . . . . . . . . . . . . . 8
Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 359 Antenna, Satellite Radio . . . . . . . . . . . . . . . . 239,263
Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 412 Anti-Lock Brake System (ABS) . . . . . . . . . . . . . . 314
Air Conditioner Maintenance . . . . . . . . . . . . . . . 414 Anti-Lock Warning Light . . . . . . . . . . . . . . . . . . 198
Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . 276 Anti-Theft Security Alarm (Theft Alarm) . . . . . . . . 18
Air Conditioning Controls . . . . . . . . . . . . . . . . . 276 Antifreeze (Engine Coolant) . . . . . . . . . . . 422,445,446
Air Conditioning Filter . . . . . . . . . . . . . . . . . 287,415 Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . 445
Air Conditioning Refrigerant . . . . . . . . . . . . . 414,415 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
Air Conditioning System . . . . . . . . . . . . . 276,280,414 Appearance Care . . . . . . . . . . . . . . . . . . . . . . . . 432
Air Conditioning, Operating Tips . . . . . . . . . . . . 288 Assistance Towing . . . . . . . . . . . . . . . . . . . . . . . 112
Air Pressure, Tires . . . . . . . . . . . . . . . . . . . . . . . 337 Automatic Dimming Mirror . . . . . . . . . . . . . . . . . 94
Airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61,70 Automatic Door Locks . . . . . . . . . . . . . . . . . . . 32,33
Airbag Deployment . . . . . . . . . . . . . . . . . . . . . . . 71 Automatic Temperature Control (ATC) . . . . . . . . . 280
Airbag Light . . . . . . . . . . . . . . . . . . . 68,69,74,86,197 Automatic Transaxle . . . . . . . . . . . . . . . . . 12,294,381
Airbag Maintenance . . . . . . . . . . . . . . . . . . . . . . . 73 Overheating . . . . . . . . . . . . . . . . . . . . . . . . 381
Airbag, Side . . . . . . . . . . . . . . . . . . . . . . 64,67,69,70
 INDEX 477
Automatic Transmission . . . . . . . . . . . . . . . . 299,429 Warning Light . . . . . . . . . . . . . . . . . . . . . . . 199
Fluid and Filter Changes . . . . . . . . . . . . . . . 430 Brake, Parking . . . . . . . . . . . . . . . . . . . . . . . . . . 310
Fluid Level Check . . . . . . . . . . . . . . . . . . . . 430 Brake/Transmission Interlock . . . . . . . . . . . . . . . 300
Fluid Type . . . . . . . . . . . . . . . . . . . . . . . . . 429 Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313,426
Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . 301 Break-In Recommendations, New Vehicle . . . . . . . . 84
Special Additives . . . . . . . . . . . . . . . . . . . . . 430 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 442,443
Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306 Bulbs, Light . . . . . . . . . . . . . . . . . . . . . . . . . . 88,442

B-Pillar Location . . . . . . . . . . . . . . . . . . . . . . . . 332 Calibration, Compass . . . . . . . . . . . . . . . . . . . . . 220

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413 Capacities, Antifreeze (Engine Coolant) . . . . . . . . 445
Keyless Transmitter Replacement (RKE) . . . . . 25 Capacities, Fluid . . . . . . . . . . . . . . . . . . . . . . . . 445
Belts, Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Caps, Filler
Body Mechanism Lubrication . . . . . . . . . . . . . . . 417 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
Brake Assist System . . . . . . . . . . . . . . . . . . . . . . 317 Oil (Engine) . . . . . . . . . . . . . . . . . . . 403,404,411
Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 447 Power Steering . . . . . . . . . . . . . . . . . . . . . . 309
Brake System . . . . . . . . . . . . . . . . . . . . . . . . 313,426 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . 314,316 Carbon Monoxide Warning . . . . . . . . . . . . . . . 85,360
Master Cylinder . . . . . . . . . . . . . . . . . . . . . 427 Cargo Area Cover . . . . . . . . . . . . . . . . . . . . . . . 183
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 Cargo Area Features . . . . . . . . . . . . . . . . . . . . . . 182
10
478 INDEX
Cargo Compartment Clean Air Gasoline . . . . . . . . . . . . . . . . . . . . . . . 357
Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 Cleaning
Cargo Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 434
Cargo Load Floor . . . . . . . . . . . . . . . . . . . . . . . . 185 Climate Control . . . . . . . . . . . . . . . . . . . . . . . . . 275
Cargo Tie-Downs . . . . . . . . . . . . . . . . . . . . . . . . 185 Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 224,243,252
Cellular Phone . . . . . . . . . . . . . . . . . . . . . . . . 98,275 Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427
Center High Mounted Stop Light . . . . . . . . . . . . 444 Clutch Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . 427
Chains, Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346 Coin Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Changing A Flat Tire . . . . . . . . . . . . . . . . . . . . . 382 Compact Disc (CD) Maintenance . . . . . . . . . . . . . 274
Chart, Tire Sizing . . . . . . . . . . . . . . . . . . . . . . . . 328 Compact Spare Tire . . . . . . . . . . . . . . . . . . . . . . 340
Check Engine Light Compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
(Malfunction Indicator Light) . . . . . . . . . . . . . . . 406 Compass Calibration . . . . . . . . . . . . . . . . . . . . . 220
Checking Your Vehicle For Safety . . . . . . . . . . . . . 85 Compass Variance . . . . . . . . . . . . . . . . . . . . . . . 221
Checks, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Connector
Child Restraint . . . . . . . . . . . . . . . . . . . . . . . . 75,77 UCI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
Child Restraint Tether Anchors . . . . . . . . . . . . . . . 80 Universal Consumer Interface (UCI) . . . . . . . 266
Child Restraint with Automatic Belts . . . . . . . . . . . 78 Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Child Safety Locks . . . . . . . . . . . . . . . . . . . . . . . . 34 Contract, Service . . . . . . . . . . . . . . . . . . . . . . . . 469
Child Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Coolant (Antifreeze) . . . . . . . . . . . . . . . . . . . 445,446
 INDEX 479
Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . 421 Diagnostic System, Onboard . . . . . . . . . . . . . . . . 405
Adding Coolant (Antifreeze) . . . . . . . . . . . . . 423 Dimmer Switch, Headlight . . . . . . . . . . . . . . . . . 150
Coolant Level . . . . . . . . . . . . . . . . . . . . 421,425 Dipsticks
Disposal of Used Coolant . . . . . . . . . . . . . . . 425 Power Steering . . . . . . . . . . . . . . . . . . . . . . 309
Drain, Flush, and Refill . . . . . . . . . . . . . . . . 422 Disposal
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . 425 Antifreeze (Engine Coolant) . . . . . . . . . . . . . 425
Points to Remember . . . . . . . . . . . . . . . . 424,425 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 411
Pressure Cap . . . . . . . . . . . . . . . . . . . . . . . . 424 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Selection of Coolant (Antifreeze) . . . . . . . . . . 422 Door Locks, Automatic . . . . . . . . . . . . . . . . . . . . 32
Corrosion Protection . . . . . . . . . . . . . . . . . . . . . 432 Door Opener, Garage . . . . . . . . . . . . . . . . . . . . . 160
Cruise Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 Downshifting . . . . . . . . . . . . . . . . . . . . . . . . . . 298
Cupholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 Driver’s Seat Back Tilt . . . . . . . . . . . . . . . . . . . . 139
Customer Assistance . . . . . . . . . . . . . . . . . . . . . 467 Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308

Data Recorder, Event . . . . . . . . . . . . . . . . . . . . . . 74 Electric Remote Mirrors . . . . . . . . . . . . . . . . . . . . 96

Dealer Service . . . . . . . . . . . . . . . . . . . . . . . . . . 408 Electrical Power Outlets . . . . . . . . . . . . . . . . . . . 173
Defroster, Rear Window . . . . . . . . . . . . . . . . . . . 188 Electronic Brake Control System . . . . . . . . . . . . . 316
Defroster, Windshield . . . . . . . . . . . . . . . . 87,278,284 Anti-Lock Brake System . . . . . . . . . . . . . . . . 316
Delay (Intermittent) Wipers . . . . . . . . . . . . . . . . . 154 Brake Assist System . . . . . . . . . . . . . . . . . . . 317
10
480 INDEX
Electronic Roll Mitigation . . . . . . . . . . . . . . . 318 Oil Change Interval . . . . . . . . . . . . . . . . . . . 410
Traction Control System . . . . . . . . . . . . . . . . 316 Oil Filler Cap . . . . . . . . . . . . . . . . . . 403,404,411
Electronic Speed Control (Cruise Control) . . . . . . 157 Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . 446
Electronic Stability Control (ESC) . . . . . . . . . . . . . 322 Oil Selection . . . . . . . . . . . . . . . . . . . . . . . . 410
Electronic Vehicle Information Center (EVIC) . . . . 211 Oil Synthetic . . . . . . . . . . . . . . . . . . . . . . . . 411
Emergency, In Case of Overheating . . . . . . . . . . . . . . . . . . . . . . . . 380
Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382 Temperature Gauge . . . . . . . . . . . . . . . . . . . 201
Jump Starting . . . . . . . . . . . . . . . . . . . . . . . 392 Enhanced Accident Response Feature . . . . . . . . . . 71
Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399 Ethanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
Emission Control System Maintenance . . . . . . . . . 406 Event Data Recorder . . . . . . . . . . . . . . . . . . . . . . 74
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403,404 Exhaust Gas Caution . . . . . . . . . . . . . . . . . 39,85,360
Block Heater . . . . . . . . . . . . . . . . . . . . . . . . 296 Exhaust System . . . . . . . . . . . . . . . . . . . . . . . 85,419
Break-In Recommendations . . . . . . . . . . . . . . 84 Exterior Lights . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Checking Oil Level . . . . . . . . . . . . . . . . . . . 409
Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 421 Filters
Exhaust Gas Caution . . . . . . . . . . . . . . . . 85,360 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 412
Fuel Requirements . . . . . . . . . . . . . . . . . . . . 357 Air Conditioning . . . . . . . . . . . . . . . . . . 287,415
Jump Starting . . . . . . . . . . . . . . . . . . . . . . . 392 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . 412,446
Oil . . . . . . . . . . . . . . . . . . . . . . . . . 409,445,446
 INDEX 481
Flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357,446
Hazard Warning . . . . . . . . . . . . . . . . . . . . . 380 Adding . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
Turn Signal . . . . . . . . . . . . . . . . . . . . 88,197,444 Additives . . . . . . . . . . . . . . . . . . . . . . . . . . 359
Flooded Engine Starting . . . . . . . . . . . . . . . . . . . 295 Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . 445
Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . . 445 Clean Air . . . . . . . . . . . . . . . . . . . . . . . . . . 357
Fluid Leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Ethanol . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
Fluid Level Checks Filler Cap (Gas Cap) . . . . . . . . . . . . . . . . . . 361
Automatic Transmission . . . . . . . . . . . . . . . . 430 Gasoline . . . . . . . . . . . . . . . . . . . . . . . . . . . 357
Power Steering . . . . . . . . . . . . . . . . . . . . . . 309 Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Fluid, Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . 447 Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 446 Materials Added . . . . . . . . . . . . . . . . . . . . . 359
Fluids, Lubricants and Genuine Parts . . . . . . . . . . 446 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . 358
Fog Lights . . . . . . . . . . . . . . . . . . . . . . . 149,208,443 Octane Rating . . . . . . . . . . . . . . . . . . . . . . . 357
Folding Rear Seat . . . . . . . . . . . . . . . . . . . . . . . . 144 Requirements . . . . . . . . . . . . . . . . . . . . . . . 357
Folding Rear Seat (Sedan) . . . . . . . . . . . . . . . . . . 144 Tank Capacity . . . . . . . . . . . . . . . . . . . . . . . 445
Four Wheel Drive . . . . . . . . . . . . . . . . . . . . . . . 307 Fuel System Caution . . . . . . . . . . . . . . . . . . . . . 362
Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 307 Fueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
Four Wheel Drive Operation . . . . . . . . . . . . . . . . 307 Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438
Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . . . 396
10
482 INDEX
Garage Door Opener (HomeLink®) . . . . . . . . . . . 160 Hands-Free Phone (Uconnect™) . . . . . . . . . . . . . . 98
Gas Cap (Fuel Filler Cap) . . . . . . . . . . . . 361,363,405 Hazard Warning Flasher . . . . . . . . . . . . . . . . . . . 380
Gasoline (Fuel) . . . . . . . . . . . . . . . . . . . . . . . . . 445 Head Restraints . . . . . . . . . . . . . . . . . . . . . . . . . 141
Gasoline, Clean Air . . . . . . . . . . . . . . . . . . . . . . 357 Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443
Gasoline, Reformulated . . . . . . . . . . . . . . . . . . . 357 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 436
Gauges High Beam . . . . . . . . . . . . . . . . . . . . . . . . . 150
Coolant Temperature . . . . . . . . . . . . . . . . . . 201 High Beam/Low Beam Select Switch . . . . . . 150
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Replacing . . . . . . . . . . . . . . . . . . . . . . . . . . 443
Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . 199 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 Heated Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Gear Select Lever Override . . . . . . . . . . . . . . . . . 397 Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
General Information . . . . . . . . . . . . . . . . . 17,128,356 Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
General Maintenance . . . . . . . . . . . . . . . . . . . . . 408 Heater, Engine Block . . . . . . . . . . . . . . . . . . . . . 296
Glass Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 436 Hill Descent Control . . . . . . . . . . . . . . . . . . . 209,319
Gross Axle Weight Rating . . . . . . . . . . . . . . . . . . 366 Hill Start Assist . . . . . . . . . . . . . . . . . . . . . . . . . 320
Gross Vehicle Weight Rating . . . . . . . . . . . . . 364,365 Hitches
Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . 368
 INDEX 483
HomeLink® (Garage Door Opener) Transmitter . . . 160 Jack Location . . . . . . . . . . . . . . . . . . . . . . . . . . . 383
Hood Release . . . . . . . . . . . . . . . . . . . . . . . . . . 146 Jack Operation . . . . . . . . . . . . . . . . . . . . . . . 382,384
Jacking Instructions . . . . . . . . . . . . . . . . . . . . . . 384
Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . . 392
Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Ignition Key Removal . . . . . . . . . . . . . . . . . . . . . 12 Key-In Reminder . . . . . . . . . . . . . . . . . . . . . . . . . 14
Immobilizer (Sentry Key) . . . . . . . . . . . . . . . . . . . 15 Key, Programming . . . . . . . . . . . . . . . . . . . . . . . . 16
Infant Restraint . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Key, Replacement . . . . . . . . . . . . . . . . . . . . . . . . 16
Information Center, Vehicle . . . . . . . . . . . . . . . . . 211 Key, Sentry (Immobilizer) . . . . . . . . . . . . . . . . . . . 15
Inside Rearview Mirror . . . . . . . . . . . . . . . . . . . . 94 Keyless Entry System (Sedan) . . . . . . . . . . . . . . . . 20
Instrument Cluster . . . . . . . . . . . . . . . . . . . . . . . 196 Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Instrument Panel and Controls . . . . . . . . . . . . . . 194 Knee Bolster . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Instrument Panel Cover . . . . . . . . . . . . . . . . . . . 436
Instrument Panel Lens Cleaning . . . . . . . . . . . . . 437 Lane Change and Turn Signals . . . . . . . . . . . . . . 444
Integrated Power Module (Fuses) . . . . . . . . . . . . 438 Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . 43
Interior Appearance Care . . . . . . . . . . . . . . . . . . 435 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Intermittent Wipers (Delay Wipers) . . . . . . . . . . . 154 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Lead Free Gasoline . . . . . . . . . . . . . . . . . . . . . . 357
Leaks, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
10
484 INDEX
Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343 Fog . . . . . . . . . . . . . . . . . . . . . . . . . 149,208,443
Liftgate (Sedan) . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Headlight Switch . . . . . . . . . . . . . . . . . . . . . 148
Liftgate Window Wiper/Washer . . . . . . . . . . . . . 187 Headlights . . . . . . . . . . . . . . . . . . . . . . . . . 148
Light Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . 88,442 High Beam Indicator . . . . . . . . . . . . . . . . . . 198
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88,148 Instrument Cluster . . . . . . . . . . . . . . . . . . . 148
Airbag . . . . . . . . . . . . . . . . . . . . 68,69,74,86,197 License . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 Lights On Reminder . . . . . . . . . . . . . . . . . . 149
Anti-Lock . . . . . . . . . . . . . . . . . . . . . . . . . . 198 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Back-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . 444 Malfunction Indicator (Check Engine) . . . . . . 207
Brake Assist Warning . . . . . . . . . . . . . . . . . . 325 Map Reading . . . . . . . . . . . . . . . . . . . . . . . 152
Brake Warning . . . . . . . . . . . . . . . . . . . . . . 199 Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . 197
Bulb Replacement . . . . . . . . . . . . . . . . . . . . 443 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . 198
Cargo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 Security Alarm (Theft Alarm) . . . . . . . . . . 18,201
Center Mounted Stop . . . . . . . . . . . . . . . . . . 444 Theft Alarm (Security Alarm) . . . . . . . . . . . . 201
Daytime Running . . . . . . . . . . . . . . . . . . . . 149 Tire Pressure Monitoring (TPMS) . . . . . . . . . 203
Dimmer Switch, Headlight . . . . . . . . . . . . . . 148 Traction Control . . . . . . . . . . . . . . . . . . . . . 325
Electronic Stability Program (ESP) Indicator . . 325 Turn Signal . . . . . . . . . . . . . . . . . 88,148,150,444
Engine Temperature Warning . . . . . . . . . . . . 199 Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Warning (Instrument Cluster Description) . . . 196
 INDEX 485
Loading Vehicle . . . . . . . . . . . . . . . . . . . . . . 363,365 Frequency of Fluid Change . . . . . . . . . . . 431,432
Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . 365 Lubricant Selection . . . . . . . . . . . . . . . . . . . 431
Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 Manual Transmission . . . . . . . . . . . . . . . . . . . . . 430
Locks Fluid Level Check . . . . . . . . . . . . . . . . . . . . 430
Automatic Door . . . . . . . . . . . . . . . . . . . . . . 32 Frequency of Fluid Change . . . . . . . . . . . . . 431
Child Protection . . . . . . . . . . . . . . . . . . . . . . 34 Lubricant Selection . . . . . . . . . . . . . . . . . . . 430
Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . 471
Power Door . . . . . . . . . . . . . . . . . . . . . . . . . 31 Map/Reading Lights . . . . . . . . . . . . . . . . . . . . . 152
Lubrication, Body . . . . . . . . . . . . . . . . . . . . . . . 417 Master Cylinder (Brakes) . . . . . . . . . . . . . . . . . . 427
Lumbar Support . . . . . . . . . . . . . . . . . . . . . . . . 138 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
Mini-Trip Computer . . . . . . . . . . . . . . . . . . . . . . 209
Maintenance Free Battery . . . . . . . . . . . . . . . . . . 413 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Maintenance Procedures . . . . . . . . . . . . . . . . . . . 408 Automatic Dimming . . . . . . . . . . . . . . . . . . . 94
Maintenance Schedule . . . . . . . . . . . . . . . . . . . . 450 Electric Powered . . . . . . . . . . . . . . . . . . . . . . 96
Maintenance, General . . . . . . . . . . . . . . . . . . . . . 408 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Malfunction Indicator Light (Check Engine) . . 207,406 Outside . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Manual Transaxle . . . . . . . . . . . . . . . . . . . . . 293,296 Rearview . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Downshifting . . . . . . . . . . . . . . . . . . . . . . . 298 Vanity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Fluid Level Check . . . . . . . . . . . . . . . . . . . . 431 Modifications/Alterations, Vehicle . . . . . . . . . . . . . 8
10
486 INDEX
Monitor, Tire Pressure System . . . . . . . . . . . . . . . 348 Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 412
Mopar Parts . . . . . . . . . . . . . . . . . . . . . . . . . 407,470 Identification Logo . . . . . . . . . . . . . . . . . . . 410
MTBE/ETBE . . . . . . . . . . . . . . . . . . . . . . . . . . . 358 Materials Added to . . . . . . . . . . . . . . . . . . . 411
Multi-Function Control Lever . . . . . . . . . . . . . . . 148 Recommendation . . . . . . . . . . . . . . . . . . 410,445
Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . 411
New Vehicle Break-In Period . . . . . . . . . . . . . . . . 84 Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . . . 411
Onboard Diagnostic System . . . . . . . . . . . . . . 405,406
Occupant Restraints . . . . . . . . . . . . . . . . . . . 39,67,71 Opener, Garage Door (HomeLink®) . . . . . . . . . . . 160
Occupant Restraints (Sedan) . . . . . . . . . . . 64,65,67,70 Operator Manual (Owner’s Manual) . . . . . . . . . . . . 5
Octane Rating, Gasoline (Fuel) . . . . . . . . . . . . . . 357 Overheating, Engine . . . . . . . . . . . . . . . . . . . 202,380
Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Owner’s Manual (Operator Manual) . . . . . . . . . 5,471
Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . 203,205
Oil Change Indicator . . . . . . . . . . . . . . . . . . . . . 214 Paint Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432
Oil Change Indicator, Reset . . . . . . . . . . . . . . . . . 214 Panic Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Oil, Engine . . . . . . . . . . . . . . . . . . . . . . . . . 409,445 Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . . 310
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . 445 Passing Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Change Interval . . . . . . . . . . . . . . . . . . . . . 410 Personal Settings . . . . . . . . . . . . . . . . . . . . . . . . 217
Checking . . . . . . . . . . . . . . . . . . . . . . . . . . 409 Pets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . 411 Phone, Cellular . . . . . . . . . . . . . . . . . . . . . . . . . . 98
 INDEX 487
Phone, Hands-Free (Uconnect™) . . . . . . . . . . . . . . 98 Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 339
Placard, Tire and Loading Information . . . . . . . . . 332 Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . 275
Power Rear Axle (Differential) . . . . . . . . . . . . . . . . . . . . 431
Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . 31 Rear Drive Assembly . . . . . . . . . . . . . . . . . . . . . 431
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Rear Liftgate (Sedan) . . . . . . . . . . . . . . . . . . . . . . 38
Outlet (Auxiliary Electrical Outlet) . . . . . . . . 173 Rear Seat, Folding . . . . . . . . . . . . . . . . . . . . . . . 144
Steering . . . . . . . . . . . . . . . . . . . . . . . . 308,309 Rear Window Defroster . . . . . . . . . . . . . . . . . . . 188
Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Rear Window Features . . . . . . . . . . . . . . . . . . . . 187
Transfer Unit . . . . . . . . . . . . . . . . . . . . . . . 431 Rear Wiper/Washer . . . . . . . . . . . . . . . . . . . . . . 187
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Recorder, Event Data . . . . . . . . . . . . . . . . . . . . . . 74
Power Steering Fluid . . . . . . . . . . . . . . . . . . . . . 447 Recreational Towing . . . . . . . . . . . . . . . . . . . . . . 377
Power Transfer Unit . . . . . . . . . . . . . . . . . . . . . . 431 Reformulated Gasoline . . . . . . . . . . . . . . . . . . . . 357
Pregnant Women and Seat Belts . . . . . . . . . . . . . . 61 Refrigerant . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415
Preparation for Jacking . . . . . . . . . . . . . . . . . . . . 383 Reminder, Seat Belt . . . . . . . . . . . . . . . . . . . . . . . 59
Pretensioners Remote Control
Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . 20
Programmable Electronic Features . . . . . . . . . . . . 217 Security Alarm . . . . . . . . . . . . . . . . . . . . . . . 18
Remote Keyless Entry (Sedan) . . . . . . . . . . . . . . . 20
Remote Sound System (Radio) Controls . . . . . . . . 273
10
488 INDEX
Remote Starting System . . . . . . . . . . . . . . . . . . . . 26 Satellite Radio Antenna . . . . . . . . . . . . . . . . . 239,263
Replacement Bulbs . . . . . . . . . . . . . . . . . . . . . . . 442 Schedule, Maintenance . . . . . . . . . . . . . . . . . . . . 450
Replacement Keys . . . . . . . . . . . . . . . . . . . . . . . . 16 Seat Belt Maintenance . . . . . . . . . . . . . . . . . . . . 437
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . 407 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . . . 59
Replacement Tires . . . . . . . . . . . . . . . . . . . . . . . 344 Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39,86
Reporting Safety Defects . . . . . . . . . . . . . . . . . . . 470 Adjustable Shoulder Belt . . . . . . . . . . . . . . . . 48
Restraint, Head . . . . . . . . . . . . . . . . . . . . . . . . . 141 Adjustable Upper Shoulder Anchorage . . . . . . 48
Restraints, Child . . . . . . . . . . . . . . . . . . . . . . . 75,82 And Pregnant Women . . . . . . . . . . . . . . . . . . 61
Restraints, Occupant . . . . . . . . . . . . . . . . . . . . . . 39 Child Restraint . . . . . . . . . . . . . . . . . . . . . 75,76
Retractable Cargo Area Cover . . . . . . . . . . . . . . . 183 Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Roll Over Warning . . . . . . . . . . . . . . . . . . . . . . . . 4 Front Seat . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 346 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Pretensioners . . . . . . . . . . . . . . . . . . . . . . . . 54
Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 86 Rear Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 88 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 470 Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . 136
Safety Information, Tire . . . . . . . . . . . . . . . . . . . 326 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Lumbar Support . . . . . . . . . . . . . . . . . . . . . 138
Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . 85 Rear Folding . . . . . . . . . . . . . . . . . . . . . . . . 144
 INDEX 489
Rear Folding (Sedan) . . . . . . . . . . . . . . . . . . 144 Signals, Turn . . . . . . . . . . . . . . . . . . . . . . 88,197,444
Seatback Release . . . . . . . . . . . . . . . . . . . . . 139 Snow Chains (Tire Chains) . . . . . . . . . . . . . . . . . 346
Tilting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346
Security Alarm (Theft Alarm) . . . . . . . . . . . . . . . . 18 Spare Tire . . . . . . . . . . . . . . . . . . . . . . . 340,341,383
Selection of Oil . . . . . . . . . . . . . . . . . . . . . . . . . 410 Specifications
Sentry Key (Immobilizer) . . . . . . . . . . . . . . . . . . . 15 Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410
Sentry Key Programming . . . . . . . . . . . . . . . . . . . 16 Speed Control (Cruise Control) . . . . . . . . . . . 157,202
Sentry Key Replacement . . . . . . . . . . . . . . . . . . . 16 Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Service Assistance . . . . . . . . . . . . . . . . . . . . . . . 467 Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
Service Contract . . . . . . . . . . . . . . . . . . . . . . . . . 469 Automatic Transmission . . . . . . . . . . . . . . . . 294
Service Manuals . . . . . . . . . . . . . . . . . . . . . . . . 471 Engine Fails to Start . . . . . . . . . . . . . . . . . . 295
Setting the Clock . . . . . . . . . . . . . . . . . . 224,243,252 Manual Transmission . . . . . . . . . . . . . . . . . . 293
Settings, Personal . . . . . . . . . . . . . . . . . . . . . . . . 217 Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Shift Lever Override . . . . . . . . . . . . . . . . . . . . . . 397 Starting Procedures . . . . . . . . . . . . . . . . . . . . . . 293
Shift Speeds, Manual Transaxle . . . . . . . . . . . . . . 298 Steering
Short Message Service (SMS) . . . . . . . . . . . . . . . . 120 Power . . . . . . . . . . . . . . . . . . . . . . . . . . 308,309
Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Tilt Column . . . . . . . . . . . . . . . . . . . . . . . . 156
Side Airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Steering Wheel Audio Controls . . . . . . . . . . . . . . 273
Side Window Demisters (Defrosters) . . . . . . . . . . 287
10
490 INDEX
Steering Wheel Mounted Tie Down Hooks, Cargo . . . . . . . . . . . . . . . . . . . 185
Sound System Controls . . . . . . . . . . . . . . . . . . . 273 Tilt Steering Column . . . . . . . . . . . . . . . . . . . . . 156
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179,442 Tire and Loading Information Placard . . . . . . . . . 332
Storage Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 Tire Identification Number (TIN) . . . . . . . . . . . . . 330
Storage, Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 286 Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Stuck, Freeing . . . . . . . . . . . . . . . . . . . . . . . . . . 396 Tire Safety Information . . . . . . . . . . . . . . . . . . . . 326
Sun Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88,336,473
Sun Visor Extension . . . . . . . . . . . . . . . . . . . . . . . 98 Aging (Life of Tires) . . . . . . . . . . . . . . . . . . 343
Supplemental Restraint System - Airbag . . . . . . . . 61 Air Pressure . . . . . . . . . . . . . . . . . . . . . . . . 336
Synthetic Engine Oil . . . . . . . . . . . . . . . . . . . . . . 411 Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346
System, Remote Starting . . . . . . . . . . . . . . . . . . . . 26 Changing . . . . . . . . . . . . . . . . . . . . . . . . . . 382
Compact Spare . . . . . . . . . . . . . . . . . . . . . . 340
Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 General Information . . . . . . . . . . . . . . . . . . 336
Temperature Control, Automatic (ATC) . . . . . . . . 280 High Speed . . . . . . . . . . . . . . . . . . . . . . . . . 339
Temperature Gauge, Engine Coolant . . . . . . . 201,381 Inflation Pressures . . . . . . . . . . . . . . . . . . . . 337
Tether Anchor, Child Restraint . . . . . . . . . . . . . . . 80 Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382
Text Messaging . . . . . . . . . . . . . . . . . . . . . . . . . 120 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . 343
Theft Alarm (Security Alarm) . . . . . . . . . . . . . . . . 18 Load Capacity . . . . . . . . . . . . . . . . . . . . 332,333
Theft System (Security Alarm) . . . . . . . . . . . . . . . 18 Pressure Monitor System (TPMS) . . . . . . . . . 348
 INDEX 491
Pressure Warning Light . . . . . . . . . . . . . . . . 203 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . 365
Quality Grading . . . . . . . . . . . . . . . . . . . . . 473 Cooling System Tips . . . . . . . . . . . . . . . . . . 376
Radial . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339 Hitches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368
Replacement . . . . . . . . . . . . . . . . . . . . . . . . 344 Minimum Requirements . . . . . . . . . . . . . . . . 371
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . 346 Trailer and Tongue Weight . . . . . . . . . . . . . . 370
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . 326,336 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328 Trailer Towing Guide . . . . . . . . . . . . . . . . . . . . . 369
Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . 346 Trailer Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 369
Spare Tire . . . . . . . . . . . . . . . . . . . . . . . . . . 383 Transaxle
Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 Automatic . . . . . . . . . . . . . . . . . . . . . . . 12,294
Tread Wear Indicators . . . . . . . . . . . . . . . . . 342 Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . 306
Tongue Weight/Trailer Weight . . . . . . . . . . . . . . 370 Manual . . . . . . . . . . . . . . . . . . . . . . . . . 293,296
Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365 Transmission
24-Hour Towing Assistance . . . . . . . . . . . . . 112 Automatic . . . . . . . . . . . . . . . . . . . . . . . 299,429
Disabled Vehicle . . . . . . . . . . . . . . . . . . . . . 399 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429
Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369 Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . 430
Recreational . . . . . . . . . . . . . . . . . . . . . . . . 377 Transmitter Battery Service
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369 (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . 25
Towing Assistance . . . . . . . . . . . . . . . . . . . . . . . 112 Transmitter, Garage Door Opener (HomeLink®) . . 160
10
492 INDEX
Transporting Pets . . . . . . . . . . . . . . . . . . . . . . . . 84 Vehicle Identification Number (VIN) . . . . . . . . . . . . 7
Tread Wear Indicators . . . . . . . . . . . . . . . . . . . . 342 Vehicle Loading . . . . . . . . . . . . . . . . . . . 333,363,365
Trip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Vehicle Modifications/Alterations . . . . . . . . . . . . . . 8
Trip Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Vehicle Storage . . . . . . . . . . . . . . . . . . . . . . . 286,442
Trip Odometer Reset Button . . . . . . . . . . . . . . . . 203 Vehicle Theft Alarm (Security Alarm) . . . . . . . . . . 18
Turn Signals . . . . . . . . . . . . . . . . . . . . . . 150,197,444 Voice Recognition System (VR) . . . . . . . . . . . . . . 128

UCI Connector . . . . . . . . . . . . . . . . . . . . . . . . . 266 Warning Lights

Uconnect™ (Hands-Free Phone) . . . . . . . . . . . . . . 98 (Instrument Cluster Description) . . . . . . . . . . . . . 196
Understanding Your Instrument Panel . . . . . . . . . 194 Warning, Roll Over . . . . . . . . . . . . . . . . . . . . . . . . 4
Uniform Tire Quality Grades . . . . . . . . . . . . . . . . 473 Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . 7
Universal Consumer Interface (UCI) Connector . . . 266 Warranty Information . . . . . . . . . . . . . . . . . . . . . 470
Universal Transmitter . . . . . . . . . . . . . . . . . . . . . 160 Washer
Unleaded Gasoline . . . . . . . . . . . . . . . . . . . . . . . 357 Adding Fluid . . . . . . . . . . . . . . . . . . . . . . . 418
Washers, Windshield . . . . . . . . . . . . . . . . . . . . . 155
Vanity Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Washing Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 433
Variance, Compass . . . . . . . . . . . . . . . . . . . . . . . 221 Wheel and Wheel Trim . . . . . . . . . . . . . . . . . . . . 434
Vehicle Certification Label . . . . . . . . . . . . . . . . . 363
 INDEX 493
Wheel and Wheel Trim Care . . . . . . . . . . . . . . . . 434 Windshield Defroster . . . . . . . . . . . . . . . . 87,278,284
Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . . . 172 Windshield Washers . . . . . . . . . . . . . . . . . . . 152,155
Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . 287 Windshield Wipers . . . . . . . . . . . . . . . . . . . . 152,417
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Wipers, Intermittent . . . . . . . . . . . . . . . . . . . . . . 154
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

10
INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this The antenna cable should be as short as practical and
vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use only
frequency signals. Mobile two-way radios and telephone fully shielded coaxial cable.
equipment must be installed properly by trained personnel.
Carefully match the antenna and cable to the radio to ensure
The following must be observed during installation.
a low Standing Wave Ratio (SWR).
The positive power connection should be made directly to
Mobile radio equipment with output power greater than
the battery and fused as close to the battery as possible. The
normal may require special precautions.
negative power connection should be made to body sheet
metal adjacent to the negative battery connection. This All installations should be checked for possible interference
connection should not be fused. between the communications equipment and the vehicle’s
electronic systems.
Antennas for two-way radios should be mounted on the roof
or the rear area of the vehicle. Care should be used in
mounting antennas with magnet bases. Magnets may affect
the accuracy or operation of the compass on vehicles so
equipped.
Chrysler Group LLC
12MK49-126-AC-R3 3rd Edition Printed in U.S.A.