RT875BXL

ROUGH TERRAIN
HYDRAULIC CRANE
Dimensions

TAILSWING
14'
(4280)

24'
(7315)
10' 4"
(3150)

TRACK
8' 4-1/2"
(2553) 17' 4"
(5283)

26' 6-1/2"
(8090)

24' 11"
(7595)

43'
(13 106)

7' 3"
1' 3" (2210)
(381)

13' 1/2"
(3975)

21 °

1' 2-3/8" 13' 4"

(365) 2' 1" (4064)
(635)
12' 8" 12' 3" 1' 8"
1' 8"
(508) (3861) (3734) (508)

14' 11" 28' 3"

(4546) (8611)
CL

Note: ( ) Reference dimensions in mm

Turning Radius . . . . . . . . . . . . 22’ 6” (6858 mm)

Front Axle Load . . . . . . . . . . . 51,915 lbs. (23,548 kg)

Rear Axle Load. . . . . . . . . . . . 51,556 lbs. (23,386 kg)

Gross Vehicle Weight . . . . . . . 103,471 lbs. (46,934 kg)

Working Range

FEET

230

220

210 1.5° 56
200
45°
190
31
180

170

160

BOOM & EXTENSION HEIGHT IN FEET

150 138
70°
HEIGHT FROM GROUND IN FEET

140 125
60°
130
112
120 50°
99
110
40°
100 87

90
30° 74
80
61
70
55
60 20°
50 35

40 78° MAX
10° BOOM
30 ANGLE

20
0°
10

0
170 150 130 110 90 70 50 30 10 FEET
180 160 140 120 100 80 60 40 20
AXIS OF
ROTATION
OPERATING RADIUS IN FEET FROM AXIS OF ROTATION

DIMENSIONS ARE FOR LARGEST

GROVE FURNISHED HOOK BLOCK AND
5'-6" 9'-7"
7'-0" HEADACHEBALL, WITH ANTI-TWO
BLOCK ACTIVATED.

3 RT875BXL
Superstructure specifications
Boom Counterweight
35 ft. - 138 ft. (10.6 m - 42 m) five-section full power boom. Removable: 8,500 lbs. (3855 kg).
Maximum Tip Height: 148 ft. (45.1 m). 2,155 lbs. (977 kg) slab I.P.O. auxiliary hoist.

Folding Lattice Extension Hydraulic System

31 ft. - 56 ft. (9.4 m - 17 m) bi-fold lattice swingaway extension off- Seven main pumps with a combined capacity 199.2 GPM (754
settable at 1.5° or 45°.Stows alongside base section. LPM). Maximum operating pressure 3500 psi (241 bar). Three
Maximum Tip Height: 204 ft. (62.1 m). individual valve banks. Return line type filter with full flow by-pass
protection and service
*Optional Lattice Extension indicator. Replaceable cartridge with micron filtration rating of
31 ft. (9.4 m) lattice swingaway extension. Offsettable at 1.5° or 45°. 5/12/16. 200 gallons (757 L) reservoir. Remote mounted oil cooler
Stows alongside base boom section. with thermostatically controlled hydraulic motor driven fan/air to oil.
Maximum Tip Height: 179 ft. (54.5 m). System pressure test panel with quick release type fittings for each
circuit.
Boom Nose
Five Nylatron sheaves mounted on heavy duty tapered roller bear- Hoist Specifications
ings with removable pin-type rope guards. Quick reeving type boom Main and Auxiliary Hoist
nose. A removable auxiliary boom nose with removable pin type Planetary reduction with automatic spring applied multi-disc brake.
rope guard. Electronic hoist drum rotation
indicator, hoist drum cable followers and wire rope.
Boom Elevation
One double acting hydraulic cylinder with integral Maximum Single Line Pull: 16,969 lbs.
holding valve provides elevation from -3° to 78°. (7697 kg)

Load Moment Maximum Single Line Speed: 385 FPM

& Anti-Two Block System (117 m/min)
Standard load moment and anti-two block system with
audio-visual warning and control lever lockout. These Maximum Permissible 12,920 lbs.
systems provide electronic display of boom angle, length, radius, tip Line Pull: (5860 kg)
height, relative load moment,
maximum permissible load and load indication and warning of Rope Diameter: 3/4 in.
impending two-block condition. (19 mm)

Cab Rope Length: 620 ft.

Full vision, all galvanealed steel fabricated with (190 m)
acoustical lining and tinted safety glass throughout. Deluxe seat
with armrest mounted hydraulic single axis controllers. Dash panel Maximum Rope Stowage: 1,163 ft.
incorporates gauges for engine (354.5 m)
functions. Other standard features include: skylight screen,
hydraulic oil cab heater/defroster, telescoping tilt wheel, sliding side
and rear windows, opening
skylight, electric windshield wash-wipe, electric skylight
wipers, fire extinguisher, seat belt, ashtray and level
indicator.

Swing
Planetary swing with foot applied multi-disc wet brake. Spring
applied, hydraulically released swing brake, 360° positive swing
lock (N.Y.C. style) and 1 position, mechanical house lock, operated
from cab.
Maximum speed: 2.0 RPM.

4 RT875BXL
Carrier specifications

Chassis Oscillation Lockouts

Box section frame fabricated from high-strength, low alloy steel. Automatic full hydraulic lockouts on rear axle permits oscillation
Integral outrigger housings and front/rear only with boom centered over the front.
towing and tie down lugs.
Brakes
Outrigger System Full air split circuit operating on all wheels.
Four hydraulic telescoping single-stage double box beam outriggers Spring-applied, air released front and rear axles.
with inverted jacks and integral
holding valves. Three position setting. All steel Tires
fabricated quick release type outrigger floats, 30.5" (77.5 mm) Std. 33.25 x 29 - 32PR earthmover type.
diameter. *Optional: 33.25R29 radial.
Maximum outrigger pad load: 94,000 lbs. (42 638 kg).
Lights
Full lighting including turn indicators, head, tail, brake, and hazard
Outrigger Controls
warning lights.
Controls and crane level indicator located in cab.

Engine Maximum Speed

25 MPH (40 kph).
Cummins 6CTA 8.3 diesel, six cylinders, turbocharged, 250 bhp
(186 kW) (Gross) @ 2,200 RPM.
Maximum torque: 794 ft. lbs. (1077 Nm) @ 1,500 RPM.
Gradeability (Theoretical)
87% based on 102,840 lbs. (46 648 kg) GVW.
33.25 x 29 tires, pumps disengaged, 138 ft. (42 m) boom, plus 31
*Optional Engine
ft. (9.4 m) swingaway.
Caterpillar 3126TA diesel, six cylinders, turbocharged, 250 bhp (186
kW) (Gross) @ 2,500 RPM.
Maximum torque: 686 ft. lbs. (930 Nm) @ 1,650 RPM.
Miscellaneous Standard Equipment
Full width steel fenders, dual rear view mirrors,
hookblock tiedown, electronic back-up alarm, light package, front
Fuel Tank Capacity
stowage well, tachometer/hourmeter, cold start aid (less canister),
80 gallons (303 L)
rear wheel position
indicator, hydraulic cab heater, hoist mirrors, engine
Transmission distress A/V warning system, tire inflation kit.
Full powershift with 6 forward and 6 reverse speeds. Rear axle dis-
connect for 4 x 2 travel.
*Optional Equipment
Electrical System * Popular Option Package - cab controlled craoss axle differential
Two 12 V - maintenance free batteries. 24 V starting and lighting.
locks front and rear.
* Auxiliary Lighting Package - cab mounted remote controlled
Drive worklights, cab mounted amber flashing light, hoist mounted
4 x 4.
worklight, and dual base boom mounted floodlights.
* Convenience Package - includes immersion type engine block
Steering heater (120 V, 1500 watt), in-cab LMI light bar, and auto-grease
Fully independent power steering: system for turntable.
Front: Full hydraulic steering wheel controlled.
Rear: Full hydraulic hand lever controlled. *Denotes optional equipment
Provides infinite variations of 4 main steering
modes: front only, rear only, crab and coordinated.
Rear steer indicating gauge.

Axles
Front: Drive steer with differential and planetary
reduction hubs rigid mounted to frame.
Rear: Drive/steer with differential and planetary
reduction hubs pivot mounted to frame.
Automatic full hydraulic lockouts on rear axle.

RT875BXL 5
 RATED LIFTING CAPACITIES IN POUNDS WITH COUNTERWEIGHT
35 FT. - 138 FT. BOOM
ON OUTRIGGERS FULLY EXTENDED - 360°
#0001
Radius
in Main Boom Length in Feet
Feet
35 55 61 74 87 99 112 125 138
+150,000 79,100 78,450 *57,050
10
(65.5) (76) (77.5) (80)
106,500 79,100 77,500 57,050 *43,300
12
(62) (73.5) (75.5) (78.5) (80)
90,050 79,100 69,850 51,650 43,300 *32,100
15
(56) (70) (72.5) (76) (78.5) (80)
68,300 67,350 59,850 44,350 39,550 32,100 *30,050 *20,150
20
(44.5) (64.5) (67.5) (71.5) (75) (77.5) (80) (80)
52,250 51,150 51,450 38,750 33,800 32,100 30,050 20,150 *19,000
25
(29.5) (58) (62) (67.5) (71.5) (74.5) (77) (79) (80)
39,200 39,450 34,200 29,200 30,200 27,350 19,100 18,300
30
(51) (56.5) (63) (68) (71.5) (74.5) (76.5) (78.5)
31,000 31,300 29,050 25,800 26,600 24,300 18,100 17,650
35
(43.5) (50) (58.5) (64) (68.5) (71.5) (74) (76.5)
25,050 25,350 25,150 22,900 23,450 21,600 17,250 17,000
40
(34.5) (43) (53.5) (60) (65) (69) (72) (74)
20,500 20,800 20,600 20,000 20,450 19,250 16,450 16,350
45
(21.5) (35) (48.5) (56) (61.5) (66) (69) (72)
17,250 16,850 16,900 17,900 16,900 15,750 15,700
50
(24.5) (42.5) (52) (58.5) (63) (66.5) (69.5)
10,500 10,600 11,800 13,000 13,100 13,300
60
(28) (42.5) (51) (57) (61.5) (65)
6,500 7,670 8,860 10,050 11,050
70
(30) (42.5) (50) (56) (60)
4,710 5,910 7,090 8,290
80
(32) (42.5) (49.5) (55)
2,390 3,690 4,880 6,060
90
(15.5) (33.5) (43) (49.5)
1,910 3,170 4,340
100
(21) (35) (43)
1,810 2,970
110
(24.5) (36)
1,860
120
(27)
Minimum boom angle (deg.) for indicated length (no load) 16 18
Maximum boom length (ft.) at 0 degree boom angle (no load) 112
NOTE: ( ) Boom angles are in degrees.
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum boom angle.
+12 parts line required to lift this capacity (using aux. boom nose). Refer to reeving diagram.

Lifting Capacities On Outriggers Fully Extended - 360° At Zero Degree Boom Angle

Boom Main Boom Length in Feet

Angle 35 55 61 74 87 99 112
27,400 12,850 10,400 6,290 3,380 1,970 1,170
0°
(28.2) (47.4) (53.8) (66.6) (79.4) (92.2) (105)
NOTE: ( ) Reference radii in feet. A6-829-016119A

Boom Extension Sequence in %

Inner-Mid 0 50 50 75 100 100 100 100 100
Mid 0 25 50 75 100 100 100 100 100
Outer-Mid 0 0 0 0 0 25 50 75 100
Fly 0 0 0 0 0 25 50 75 100

RT875BXL - S/N 9
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

6 RT875BXL
 31 FT. - 56 FT. FOLDING BOOM EXTENSION USING 125 FT. MAIN BOOM
ON OUTRIGGERS FULLY EXTENDED - 360° WITH COUNTERWEIGHT
31 FT. LENGTH 56 FT. LENGTH
Radius
#0021 #0023 #0041 #0043
in
Feet 1.5° 45° 1.5° 45°
OFFSET OFFSET OFFSET OFFSET
*11,500
30
(80)
11,500
35
(78.5)
11,500 6,950
40
(77) (79.5)
11,500 *8,000 6,780
45
(75) (80) (78.5)
11,000 6,810 6,620
50
(73.5) (78.5) (77)
10,050 6,490 6,290
60
(70) (74.5) (74)
9,220 6,400 5,960 *3,700
70
(66) (70.5) (71) (80)
8,440 6,350 5,640 3,520
80
(62) (66) (67.5) (76.5)
6,900 6,340 5,260 3,400
90
(57.5) (61.5) (64.5) (72.5)
5,090 5,860 4,980 3,290
100
(53) (56.5) (60.5) (68.5)
3,640 4,180 4,630 3,190
110
(47.5) (51) (56.5) (64)
2,450 3,420 3,110
120
(41.5) (52) (59.5)
1,450 2,360 3,040
130
(34.5) (47.5) (54)
1,460
140
(42.5)
Minimum boom angle
(deg.) for indicated 33 45 39 49
length (no load)
Maximum boom length
(ft.) at 0 degree boom 87 74
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-014898A
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum boom angle.

1. All capacities above the bold line are based on structural strength of boom extension and do not exceed
85% of tipping loads, in accordance with SAE J-765.
2. 31 ft. and 56 ft. folding boom extension lengths may be used for single line lifting service only.
3. For main boom lengths less than 125 ft. with the boom extension erected, the rated loads are determined
by boom angle. Use only the column which corresponds to the boom extension length and offset for which
the machine is set up. For boom angles not shown, use rating of the next lower boom angle.
4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited.
Machine tipping with boom extension occurs rapidly and without advance warning.
5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after
lifting rated load.
6. Capacities listed are with outriggers properly extended and vertical jacks set only.
RT875BXL - S/N 10
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

RT875BXL 7
 31 FT. - 56 FT. FOLDING BOOM EXTENSION USING 138 FT. MAIN BOOM
ON OUTRIGGERS FULLY EXTENDED - 360° WITH COUNTERWEIGHT
31 FT. LENGTH 56 FT. LENGTH
Radius
#0021 #0023 #0041 #0043
in
Feet 1.5° 45° 1.5° 45°
OFFSET OFFSET OFFSET OFFSET
9,500
35
(79.5)
9,500 *5,500
40
(78) (80)
9,500 5,400
45
(76.5) (79.5)
9,500 *7,800 5,300
50
(75) (80) (78)
9,110 6,740 5,100
60
(71.5) (77) (75.5)
8,450 6,460 4,900 *3,600
70
(68.5) (73.5) (72.5) (80)
7,550 6,350 4,700 3,500
80
(64.5) (69.5) (69.5) (77.5)
6,990 6,280 4,500 3,400
90
(60.5) (65.5) (66.5) (74)
5,480 6,220 4,300 3,300
100
(56.5) (61) (63.5) (70.5)
3,980 4,710 4,100 3,200
110
(52) (56.5) (59.5) (67)
2,750 3,320 3,650 3,100
120
(47) (51) (56) (63)
1,740 2,690 3,000
130
(41.5) (52) (58.5)
1,870 2,540
140
(47.5) (53.5)
1,130
150
(42.5)
Minimum boom angle
(deg.) for indicated 37 45 42 47
length (no load)
Maximum boom length
(ft.) at 0 degree boom 87 74
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-014897
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum boom angle.
1. All capacities above the bold line are based on structural strength of boom extension and do not exceed
85% of tipping loads, in accordance with SAE J-765.
2. 31 ft. and 56 ft. folding boom extension lengths may be used for single line lifting service only.
3. For main boom lengths between 125 ft. and fully extended with the boom extension erected, the rated loads
are determined by boom angle. Use only the column which corresponds to the boom extension length and
offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom
angle.
4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited.
Machine tipping with boom extension occurs rapidly and without advance warning.
5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after
lifting rated load.
6. Capacities listed are with outriggers properly extended and vertical jacks set only.
RT875BXL - S/N 11
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

8 RT875BXL
 RATED LIFTING CAPACITIES IN POUNDS WITH COUNTERWEIGHT
35 FT. - 138 FT. BOOM
ON OUTRIGGERS 50% EXTENDED (17' 4" SPREAD) - 360°
#4001
Radius
in Main Boom Length in Feet
Feet
35 55 61 74 87 99 112 125 138
115,000 79,100 78,450 *57,050
10
(65.5) (76) (77.5) (80)
101,500 79,100 77,500 57,050 *43,300
12
(62) (73.5) (75.5) (78.5) (80)
86,150 79,100 69,850 51,650 43,300 *32,100
15
(56) (70) (72.5) (76) (78.5) (80)
62,850 56,100 55,000 44,350 39,550 32,100 *30,050 *20,150
20
(44.5) (64.5) (67.5) (71.5) (75) (77.5) (80) (80)
39,750 37,950 38,300 35,950 33,800 32,100 30,050 20,150 *19,000
25
(29.5) (58) (62) (67.5) (71.5) (74.5) (77) (79) (80)
26,000 26,800 26,450 25,150 25,800 26,150 19,100 18,300
30
(51) (56.5) (63) (68) (71.5) (74.5) (76.5) (78.5)
18,550 19,250 18,800 18,700 19,900 20,500 18,100 17,650
35
(43.5) (50) (58.5) (64) (68.5) (71.5) (74) (76.5)
See 13,550 14,100 13,550 13,550 14,750 15,900 16,750 17,000
40
Note 16 (34.5) (43) (53.5) (60) (65) (69) (72) (74)
9,890 10,350 9,800 9,810 10,950 12,150 13,300 14,000
45
(21.5) (35) (48.5) (56) (61.5) (66) (69) (72)
7,560 6,930 6,980 8,140 9,310 10,450 11,600
50
(24.5) (42.5) (52) (58.5) (63) (66.5) (69.5)
2,870 2,970 4,110 5,260 6,400 7,540
60
(28) (42.5) (51) (57) (61.5) (65)
1,400 2,530 3,660 4,790
70
(42.5) (50) (56) (60)
1,690 2,810
80
(49.5) (55)
1,310
90
(49.5)
0.1A (lbs.) 1,270 1,340 1,310 1,330 1,350 1,230 1,140 1,070 1,010
Minimum boom angle (deg.)
24 35 40 43 45 47
for indicated length (no load)
Maximum boom length (ft.)
61
at 0° boom angle (no load)
NOTE: ( ) Boom angles are in degrees.
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum boom angle.

Lifting Capacities On Outriggers 50% Extended - 360° At Zero Degree Boom Angle
Boom Main Boom Length in Feet
Angle 35 55 61
27,400 8,500 5,850
0°
(28.2) (47.4) (53.8)
NOTE: ( ) Reference radii in feet. A6-829-014849A
Boom Extension Sequence in %
Inner-Mid 0 50 50 75 100 100 100 100 100
Mid 0 25 50 75 100 100 100 100 100
Outer-Mid 0 0 0 0 0 25 50 75 100
Fly 0 0 0 0 0 25 50 75 100

RT875BXL - S/N 13
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

RT875BXL 9
 31 FT. - 56 FT. FOLDING BOOM EXTENSION USING 125 FT. MAIN BOOM
ON OUTRIGGERS 50% EXTENDED (17' 4" SPREAD) - 360° WITH COUNTERWEIGHT
31 FT. LENGTH 56 FT. LENGTH
Radius
#4021 #4023 #4041 #4043
in
Feet 1.5° 45° 1.5° 45°
OFFSET OFFSET OFFSET OFFSET
*11,500
30
(80)
11,500
35
(78.5)
11,500 6,950
40
(77) (79.5)
11,500 *8,000 6,780
45
(75) (80) (78.5)
11,000 6,810 6,620
50
(73.5) (78.5) (77)
8,070 6,490 6,290
60
(70) (74.5) (74)
5,580 6,400 5,960 *3,700
70
(66) (70.5) (71) (80)
3,710 5,080 4,390 3,520
80
(62) (66) (67.5) (76.5)
2,100 3,130 2,940 3,400
90
(57.5) (61.5) (64.5) (72.5)
1,610 1,790 3,290
100
(56.5) (60.5) (68.5)
2,430
110
(64)
1,230
120
(59.5)
0.1A (lbs.) 990 900 910 810
Minimum boom angle
(deg.) for indicated 53 55 57 58
length (no load)
Maximum boom length
(ft.) at 0° boom angle 61 35
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-014902A
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum boom angle.

1. All capacities above the bold line are based on structural strength of boom extension. Capacities corre-
spond to SAE J1289 (Test Load = 1.25P + 0.1A). 0.1A represents one-tenth (0.10) of the total boom
weight reduced to the boom point.
2. 31 ft. and 56 ft. folding boom extension lengths may be used for single line lifting service only.
3. For main boom lengths less than 125 ft. with the boom extension erected, the rated loads are determined
by boom angle. Use only the column which corresponds to the boom extension length and offset for which
the machine is set up. For boom angles not shown, use rating of the next lower boom angle.
4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited.
Machine tipping with boom extension occurs rapidly and without advance warning.
5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after
lifting rated load.
6. Capacities listed are with outriggers properly extended and vertical jacks set only.

RT875BXL - S/N 14
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

10 RT875BXL
 31 FT. - 56 FT. FOLDING BOOM EXTENSION USING 138 FT. MAIN BOOM
ON OUTRIGGERS 50% EXTENDED (17' 4" SPREAD) - 360° WITH COUNTERWEIGHT
31 FT. LENGTH 56 FT. LENGTH
Radius
#4021 #4023 #4041 #4043
in
Feet 1.5° 45° 1.5° 45°
OFFSET OFFSET OFFSET OFFSET
9,500
35
(79.5)
9,500 *5,500
40
(78) (80)
9,500 5,400
45
(76.5) (79.5)
9,500 *7,800 5,300
50
(75) (80) (78)
8,220 6,740 5,100
60
(71.5) (77) (75.5)
5,760 6,460 4,900 *3,600
70
(68.5) (73.5) (72.5) (80)
3,920 5,450 4,460 3,500
80
(64.5) (69.5) (69.5) (77.5)
2,480 3,690 3,030 3,400
90
(60.5) (65.5) (66.5) (74)
1,220 2,140 1,890 3,300
100
(56.5) (61) (63.5) (70.5)
2,280
110
(67)
1,230
120
(63)
0.1A (lbs.) 960 880 900 810
Minimum boom angle
(deg.) for indicated 53 57 59 61
length (no load)
Maximum boom
length (ft.) at 0° boom 61 35
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-014901B
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum boom angle.

1. All capacities above the bold line are based on structural strength of boom extension. Capacities corre-
spond to SAE J1289 (Test Load = 1.25P + 0.1A). 0.1A represents one-tenth (0.10) of the total boom
weight reduced to the boom point.
2. 31 ft. and 56 ft. folding boom extension lengths may be used for single line lifting service only.
3. For main boom lengths between 125 ft. and fully extended with the boom extension erected, the rated loads
are determined by boom angle. Use only the column which corresponds to the boom extension length and
offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom
angle.
4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited.
Machine tipping with boom extension occurs rapidly and without advance warning.
5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after
lifting rated load.
6. Capacities listed are with outriggers properly extended and vertical jacks set only.

RT875BXL - S/N 15
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

RT875BXL 11
 RATED LIFTING CAPACITIES IN POUNDS WITH COUNTERWEIGHT
35 FT. - 138 FT. BOOM
ON OUTRIGGERS 0% EXTENDED (10' 4" SPREAD) - 360°
#8001
Radius
in Main Boom Length in Feet
Feet
35 55 61 74 87 99 112 125 138
86,700 71,750 69,000 *57,050
10
(65.5) (76) (77.5) (80)
65,550 55,400 53,700 49,100 *43,300
12
(62) (73.5) (75.5) (78.5) (80)
46,750 40,050 39,200 36,150 33,550 *32,100
15
(56) (70) (72.5) (76) (78.5) (80)
29,400 25,650 25,350 23,500 21,950 22,400 *22,550 *20,150
20
(44.5) (64.5) (67.5) (71.5) (75) (77.5) (80) (80)
19,100 17,450 17,400 16,050 14,950 15,750 16,200 16,450 *16,550
25
(29.5) (58) (62) (67.5) (71.5) (74.5) (77) (79) (80)
11,450 12,150 11,150 10,300 11,250 11,850 12,250 12,500
30
(51) (56.5) (63) (68) (71.5) (74.5) (76.5) (78.5)
7,350 7,950 7,540 6,980 8,020 8,730 9,230 9,580
35
(43.5) (50) (58.5) (64) (68.5) (71.5) (74) (76.5)
See 4,420 4,940 4,460 4,430 5,570 6,350 6,910 7,320
40
Note 16 (34.5) (43) (53.5) (60) (65) (69) (72) (74)
2,240 2,690 2,150 2,160 3,290 4,410 5,080 5,530
45
(21.5) (35) (48.5) (56) (61.5) (66) (69) (72)
1,500 2,590 3,600 4,080
50
(58.5) (63) (66.5) (69.5)
1,880
60
(65)
0.1A (lbs.) 1,270 1,340 1,310 1,330 1,350 1,230 1,140 1,070 1,010
Minimum boom angle (deg.)
25 44 53 56 59 62 62
for indicated length (no load)
Maximum boom length (ft.)
55
at 0 degree boom angle (no load)
NOTE: ( ) Boom angles are in degrees.
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum boom angle.

Lifting Capacities On Outriggers 0% Extended - 360° At Zero Degree Boom Angle

Boom Main Boom Length in Feet
Angle 35 55
14,950 1,390
0°
(28.2) (47.4)
NOTE: ( ) Reference radii in feet. A6-829-014851A
Boom Extension Sequence in %

Inner-Mid 0 50 50 75 100 100 100 100 100

Mid 0 25 50 75 100 100 100 100 100
Outer-Mid 0 0 0 0 0 25 50 75 100
Fly 0 0 0 0 0 25 50 75 100

RT875BXL - S/N 17
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

12 RT875BXL
 RATED LIFTING CAPACITIES ON RUBBER WITH COUNTERWEIGHT
33.25x29 GENERAL TIRES
STATIONARY CAPACITIES - 360°
#9005
Radius
in Main Boom Length in Feet
Feet
35 55 61 74 87
45,200 40,850
10
(65.5) (76)
43,100 40,850
12
(62) (73.5)
29,400 29,400 29,400 29,400
15
(56) (70) (72.5) (76)
17,750 17,750 17,750 17,750 17,750
20
(44.5) (64.5) (67.5) (71.5) (75)
11,300 11,300 11,300 11,300 11,300
25
(29.5) (58) (62) (67.5) (71.5)
7,300 7,300 7,300 7,300
30
(51) (56.5) (63) (68)
4,520 4,520 4,520 4,520
35
(43.5) (50) (58.5) (64)

2,290 2,290 2,290 2,290

40
(34.5) (43) (53.5) (60)

Minimum boom angle (deg.) for

31 40 50 58
indicated length (no load)
Maximum boom length (ft.) at
0 degree boom angle (no load) 35

NOTE: ( ) Boom angles are in degrees.

#LMI operating code. Refer to LMI manual for operating instructions.

Capacities at Zero Degree Boom Angle

Main Boom Length in Feet
Boom
Angle 35
9,350
0° (28.2)
NOTE: ( ) Reference radii in feet. A6-829-015116
1. Capacities do not exceed 75% of tipping loads as determined by test in accordance with SAE J765.
2. Capacities are applicable to machines equipped with 33.25x29 (32 ply) General tires at 65 psi cold inflation pressure.
3. Defined Arc - Over front includes 6° on either side of longitudinal centerline of machine.
4. Capacities appearing above the bold line are based on structural strength and tipping should not be relied upon as a
capacity limitation.
5. Capacities are applicable only with machine on firm level surface.
6. On rubber lifting with boom extensions not permitted.
7. For pick and carry operation, boom must be centered over front of machine, mechanical swing lock engaged and load
restrained from swinging. When handling loads in the structural range with capacities close to maximum ratings, travel
should be reduced to creep speeds.
8. Axle lockouts must be functioning when lifting on rubber.
9. All lifting depends on proper tire inflation, capacity and condition. Capacities must be reduced for lower tire inflation
pressures. See lifting capacity chart for tire used. Damaged tires are hazardous to safe operation of crane.
10. Creep - not over 200 ft. of movement in any 30 minute period and not exceeding 1 mph.
RT875BXL - S/N 18
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

RT875BXL 13
 RATED LIFTING CAPACITIES ON RUBBER (cont'd.)
PICK & CARRY CAPACITIES - UP TO 2.5 MPH
BOOM CENTERED OVER FRONT (SEE NOTE 7)

#9006
Radius
in Main Boom Length in Feet
Feet
35 55 61 74 87
45,200 29,150
10
(65.5) (76)
45,200 29,150
12
(62) (73.5)
37,250 29,150 26,900 18,150
15
(56) (70) (72.5) (76)
30,600 29,150 26,900 18,150 12,400
20
(44.5) (64.5) (67.5) (71.5) (75)
20,250 20,250 20,250 18,150 12,400
25
(29.5) (58) (62) (67.5) (71.5)
14,400 14,400 14,440 12,400
30
(51) (56.5) (63) (68)
10,650 10,650 10,650 10,650
35
(43.5) (50) (58.5) (64)
7,940 7,940 7,940 7,940
40
(34.5) (43) (53.5) (60)
5,920 5,920 5,920 5,920
45
(21.5) (35) (48.5) (56)
4,380 4,380 4,380
50
(24.5) (42.5) (52)
2,160 2,160
60
(28) (42.5)
Minimum boom angle (deg.) for indicated length (no load) 40

Maximum boom length (ft.) at 0 degree boom angle (no load) 74

NOTE: ( ) Boom angles are in degrees.

#LMI operating code. Refer to LMI manual for operating instructions.

Capacities at Zero Degree Boom Angle

Boom Main Boom Length in Feet

Angle 35 55 61 74
16,500 5,140 3,430 1,110
0°
(28.2) (47.4) (53.8) (66.6)
NOTE: ( ) Reference radii in feet. A6-829-015118

RT875BXL - S/N 19
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

14 RT875BXL
 RATED LIFTING CAPACITIES ON RUBBER WITH COUNTERWEIGHT
33.25Rx29 GENERAL TIRES
STATIONARY CAPACITIES DEFINED ARC OVER FRONT (SEE NOTE 3)

#9005
Radius
in Main Boom Length in Feet
Feet
35 55 61 74 87
45,200 40,850
10
(65.5) (76)
45,200 40,850 40,850
12
(62) (73.5) (75.5)
45,200 40,850 40,850 34,400
15
(56) (70) (72.5) (76)
40,850 40,850 40,850 34,400 24,050
20
(44.5) (64.5) (67.5) (71.5) (75)
27,000 27,100 27,100 27,100 24,050
25
(29.5) (58) (62) (67.5) (71.5)
19,200 19,200 19,200 19,200
30
(51) (56.5) (63) (68)
14,200 14,200 14,200 14,200
35
(43.5) (50) (58.5) (64)
10,550 10,550 10,550 10,550
40
(34.5) (43) (53.5) (60)
7,905 7,905 7,905 7,905
45
(21.5) (35) (48.5) (56)
5,840 5,840 5,840
50
(24.5) (42.5) (52)
2,880 2,880
60
(28) (42.5)

Minimum boom angle (deg.) for indicated length (no load) 40

Maximum boom length (ft.) at 0 degree boom angle (no load) 74

NOTE: ( ) Boom angles are in degrees.

#LMI operating code. Refer to LMI manual for operating instructions.

Capacities at Zero Degree Boom Angle

Boom Main Boom Length in Feet

Angle 35 55 61 74
22,000 6,860 4,570 1,480
0°
(28.2) (47.4) (53.8) (66.6)
NOTE: ( ) Reference radii in feet. A6-829-015117

(See page 18 for notes.)

RT875BXL - S/N 20
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

RT875BXL 15
 RATED LIFTING CAPACITIES IN POUNDS WITHOUT COUNTERWEIGHT
35 FT. - 138 FT. BOOM
ON OUTRIGGERS FULLY EXTENDED - 360°
Radius #0801
in Main Boom Length in Feet
Feet 35 55 61 74 87 99 112 125 138
122,000 79,100 78,450 *57,050
10
(65.5) (76) (77.5) (80)
104,500 79,100 77,500 57,050 *43,300
12
(62) (73.5) (75.5) (78.5) (80)
85,800 79,100 69,850 51,650 43,300 *32,100
15
(56) (70) (72.5) (76) (78.5) (80)
63,400 62,150 59,850 44,350 39,550 32,100 *30,050 *20,150
20
(44.5) (64.5) (67.5) (71.5) (75) (77.5) (80) (80)
46,000 44,900 45,200 38,750 33,800 32,100 30,050 20,150 *19,000
25
(29.5) (58) (62) (67.5) (71.5) (74.5) (77) (79) (80)
34,100 34,400 34,150 29,200 30,200 27,350 19,100 18,300
30
(51) (56.5) (63) (68) (71.5) (74.5) (76.5) (78.5)
26,750 27,000 26,800 25,800 26,600 24,300 18,100 17,650
35
(43.5) (50) (58.5) (64) (68.5) (71.5) (74) (76.5)
21,350 21,650 21,450 21,300 22,600 21,600 17,250 17,000
40
(34.5) (43) (53.5) (60) (65) (69) (72) (74)
See 16,200 16,750 16,100 16,150 17,400 18,700 16,450 16,350
45
Note 16 (21.5) (35) (48.5) (56) (61.5) (66) (69) (72)
12,900 12,200 12,250 13,500 14,750 15,750 15,700
50
(24.5) (42.5) (52) (58.5) (63) (66.5) (69.5)
6,830 6,950 8,140 9,360 10,550 11,800
60
(28) (42.5) (51) (57) (61.5) (65)
3,450 4,620 5,810 7,020 8,230
70
(30) (42.5) (50) (56) (60)
2,080 3,310 4,490 5,690
80
(32) (42.5) (49.5) (55)
1,400 2,610 3,790
90
(33.5) (43) (49.5)
1,160 2,330
100
(35) (43)
1,170
110
(36)
Minimum boom angle (deg.) for indicated length (no load) 22 27 31 33 34
Maximum boom length (ft.) at 0° boom angle (no load) 74
NOTE: ( ) Boom angles are in degrees.
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum boom angle.

Lifting Capacities On Outriggers Fully Extended - 360° At Zero Degree Boom Angle
Boom Main Boom Length in Feet
Angle 35 55 61 74
27,400 12,850 10,400 4,370
0°
(28.2) (47.4) (53.8) (66.6)
NOTE: ( ) Reference radii in feet. A6-829-014848A
Boom Extension Sequence in %
Inner-Mid 0 50 50 75 100 100 100 100 100
Mid 0 25 50 75 100 100 100 100 100
Outer-Mid 0 0 0 0 0 25 50 75 100
Fly 0 0 0 0 0 25 50 75 100

RT875BXL - S/N 21
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

16 RT875BXL
 31 FT. - 56 FT. FOLDING BOOM EXTENSION WITHOUT COUNTERWEIGHT
USING 125 FT. MAIN BOOM
ON OUTRIGGERS FULLY EXTENDED - 360°
31 FT. LENGTH 56 FT. LENGTH
Radius
#0821 #0823 #0841 #0843
in
Feet 1.5° 45° 1.5° 45°
OFFSET OFFSET OFFSET OFFSET
*11,500
30
(80)
11,500
35
(78.5)
11,500 6,950
40
(77) (79.5)
11,500 *8,000 6,780
45
(75) (80) (78.5)
11,000 6,810 6,620
50
(73.5) (78.5) (77)
10,050 6,490 6,290
60
(70) (74.5) (74)
9,220 6,400 5,960 *3,700
70
(66) (70.5) (71) (80)
6,670 6,350 5,640 3,520
80
(62) (66) (67.5) (76.5)
4,650 5,710 5,260 3,400
90
(57.5) (61.5) (64.5) (72.5)
3,080 3,860 4,270 3,290
100
(53) (56.5) (60.5) (68.5)
1,830 2,380 2,900 3,190
110
(47.5) (51) (56.5) (64)
1,790 3,110
120
(52) (59.5)
1,920
130
(54)
Minimum boom angle
(deg.) for indicated 42 46 48 51
length (no load)
Maximum boom
length (ft.) at 0 degree 74 61
boom angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-014900
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum boom angle.

1. All capacities above the bold line are based on structural strength of boom extension and do not exceed
85% of tipping loads, in accordance with SAE J-765.
2. 31 ft. and 56 ft. folding boom extension lengths may be used for single line lifting service only.
3. For main boom lengths less than 125 ft. with the boom extension erected, the rated loads are determined
by boom angle. Use only the column which corresponds to the boom extension length and offset for which
the machine is set up. For boom angles not shown, use rating of the next lower boom angle.
4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited.
Machine tipping with boom extension occurs rapidly and without advance warning.
5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after
lifting rated load.
6. Capacities listed are with outriggers properly extended and vertical jacks set only.

RT875BXL - S/N 22
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

RT875BXL 17
 31 FT. - 56 FT. FOLDING BOOM EXTENSION WITHOUT COUNTERWEIGHT
USING 138 FT. MAIN BOOM
ON OUTRIGGERS FULLY EXTENDED - 360°
31 FT. LENGTH 56 FT. LENGTH
Radius
#0821 #0823 #0841 #0843
in
Feet 1.5° 45° 1.5° 45°
OFFSET OFFSET OFFSET OFFSET
9,500
35
(79.5)
9,500 *5,500
40
(78) (80)
9,500 5,400
45
(76.5) (79.5)
9,500 *7,800 5,300
50
(75) (80) (78)
9,110 6,740 5,100
60
(71.5) (77) (75.5)
8,450 6,460 4,900 *3,600
70
(68.5) (73.5) (72.5) (80)
7,210 6,350 4,700 3,500
80
(64.5) (69.5) (69.5) (77.5)
5,100 6,280 4,500 3,400
90
(60.5) (65.5) (66.5) (74)
3,470 4,420 4,300 3,300
100
(56.5) (61) (63.5) (70.5)
2,170 2,910 3,210 3,200
110
(52) (56.5) (59.5) (67)
1,120 1,680 2,170 3,090
120
(47) (51) (56) (63)
1,260 2,040
130
(52) (58.5)
1,160
140
(53.5)
Minimum boom angle
(deg.) for indicated 46 49 50 52
length (no load)
Maximum boom
length (ft.) at 0° boom 74 61
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-014899A
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum boom angle.
1. All capacities above the bold line are based on structural strength of boom extension and do not exceed
85% of tipping loads, in accordance with SAE J-765.
2. 31 ft. and 56 ft. folding boom extension lengths may be used for single line lifting service only.
3. For main boom lengths between 125 ft. and fully extended with the boom extension erected, the rated
loads are determined by boom angle. Use only the column which corresponds to the boom extension
length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower
boom angle.
4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited.
Machine tipping with boom extension occurs rapidly and without advance warning.
5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after
lifting rated load.
6. Capacities listed are with outriggers properly extended and vertical jacks set only.
RT875BXL - S/N 23
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

18 RT875BXL
 RATED LIFTING CAPACITIES IN POUNDS WITHOUT COUNTERWEIGHT
35 FT. - 138 FT. BOOM
ON OUTRIGGERS 50% EXTENDED (17' 4" SPREAD) - 360°
Radius #4801
in Main Boom Length in Feet
Feet
35 55 61 74 87 99 112 125 138
112,500 79,100 78,450 *57,050
10
(65.5) (76) (77.5) (80)
99,350 79,100 77,500 57,050 *43,300
12
(62) (73.5) (75.5) (78.5) (80)
84,050 73,500 69,850 51,650 43,300 *32,100
15
(56) (70) (72.5) (76) (78.5) (80)
50,150 44,350 43,550 40,400 37,800 32,100 *30,050 *20,150
20
(44.5) (64.5) (67.5) (71.5) (75) (77.5) (80) (80)
30,950 29,150 29,650 27,650 26,000 26,550 26,750 20,150 *19,000
25
(29.5) (58) (62) (67.5) (71.5) (74.5) (77) (79) (80)
19,250 20,050 19,700 18,650 19,500 19,950 19,100 18,300
30
(51) (56.5) (63) (68) (71.5) (74.5) (76.5) (78.5)
13,100 13,800 13,300 13,200 14,450 15,250 15,700 15,950
35
(43.5) (50) (58.5) (64) (68.5) (71.5) (74) (76.5)
See 8,950 9,520 8,990 8,960 10,150 11,300 12,300 12,650
40
Note 16 (34.5) (43) (53.5) (60) (65) (69) (72) (74)
5,930 6,420 5,840 5,850 7,030 8,200 9,380 10,100
45
(21.5) (35) (48.5) (56) (61.5) (66) (69) (72)
4,070 3,450 3,490 4,660 5,820 6,980 8,130
50
(24.5) (42.5) (52) (58.5) (63) (66.5) (69.5)
1,310 2,450 3,590 4,730
60
(51) (57) (61.5) (65)
1,310 2,440
70
(56) (60)
0.1A (lbs.) 1,270 1,340 1,310 1,330 1,350 1,230 1,140 1,070 1,010
Minimum boom angle (deg.) for indicated length (no
30 43 48 51 54 56
load)
Maximum boom length (ft.)
61
at 0 degree boom angle (no load)
NOTE: ( ) Boom angles are in degrees.
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum boom angle.

Lifting Capacities On Outriggers 50% Extended - 360° At Zero Degree Boom Angle
Boom Main Boom Length in Feet
Angle 35 55 61
23,900 4,780 2,660
0°
(28.2) (47.4) (53.8)
NOTE: ( ) Reference radii in feet. A6-829-014850A

Boom Extension Sequence in %

Inner-Mid 0 50 50 75 100 100 100 100 100
Mid 0 25 50 75 100 100 100 100 100
Outer-Mid 0 0 0 0 0 25 50 75 100
Fly 0 0 0 0 0 25 50 75 100

RT875BXL - S/N 24
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

RT875BXL 19
 WEIGHT REDUCTIONS FOR LOAD HANDLING DEVICES

LIFTING OFF MAIN BOOM NOSE (35 FT. - 138 FT. BOOM) WITH: When lifting over swingaway and/or jib
25 ft. Fly Section (Stowed on Boom Base Section)) 440 lbs. combinations, deduct total weight of all
load handling devices reeved over main
31 ft. Fixed Extension (Stowed on Boom Base Section)) 1,110 lbs.
boom nose directly from swingaway or
31 ft. Fixed Extension (Erected) 4,830 lbs.
jib capacity.
31-56 ft. Folding Extension (Stowed on Boom Base Section) 1,550 lbs.
31-56 ft. Folding Extension (Erected) 10,700 lbs. NOTE: All load handling devices and
LIFTING OFF 31 FT. BOOM EXTENSION WITH: boom attachments are considered part
25 ft. Fly Section (Stowed on Boom Base Section) 440 lbs. of the load and suitable allowances
MUST BE MADE for their combined
25 ft. Fly Section (Erected) Not Permitted
weights. Weights are for Grove fur-
25 ft. Fly Section (Stowed on 31 ft. Extension) Not Permitted
nished equipment.
*Reduction of main boom capacities

AUXILIARY BOOM NOSE 127 lbs.

HOOKBLOCKS and HEADACHE BALLS:
75 Ton, 6 Sheave w/cheekplates 2,299 lbs.+
75 Ton, 6 Sheave w/o cheekplates 1,711 lbs.+
TIRE INFLATION - PSI (BAR)
45 Ton, 3 Sheave w/cheekplates 1,095 lbs.+
45 Ton, 3 Sheave w/o cheekplates 830 lbs.+ SIZE LIFTING SERVICE , GENERAL
(FRONT TRA TRAVEL AND EXTENDED TRAVEL
15 Ton, 1 Sheave 423 lbs.+
& CODE STATIC, CREEP &
10 Ton Headache Ball 560 lbs.+ REAR) 2.5 MPH (4.0 KPH)
+Refer to rating plate for actual weight.
MICHELIN
---- 75 (5.2)
33.25R29 XRB**

65 (4.5)
33.25x29 (32) E-3 (SEE OPERATOR'S MANUAL FOR
EXTENDED ROADING)

RT875BXL - S/N 5

LINE PULLS AND REEVING INFORMATION

PERMISSIBLE NOMINAL
HOISTS CABLE SPECS.
LINE PULLS CABLE LENGTH
3/4" (19 mm) 18x19Class or 35x7
Main & Aux.
Rotation Resistant 12,920 lbs. 620 ft.
Model 30
Min. Breaking Str. 64,600 lbs.
3/4" (19 mm) 6x37 Class
Main & Aux.
EIPS IWRC Special Flexible 12,920 lbs. 620 ft.
Model 30
Min. Breaking Str. 58,800RT875BXL
lbs. - S/N 26

UPPER BOOM
NOSE SHEAVES

TO HOIST

REEVING DIAGRAM
AUXILIARY BOOM
NOSE SHEAVE

BOTTOM BOOM
NOSE SHEAVE

WEIGHT REDUCTIONS FOR LOAD HANDLING DEVICES

LIFTING OFF MAIN BOOM NOSE (35 FT. - 138 FT. BOOM) WITH: When lifting over swingaway and/or jib
DEAD END ON

25 ft. Fly Section (Stowed on Boom Base Section)) 440 lbs. combinations, deduct total weight of all
BOOM NOSE

HOOKBLOCK load handling devices reeved over main

31 ft. Fixed Extension (Stowed on Boom Base Section))
SHEAVES 1,110 lbs.
boom nose directly from swingaway or
31 ft. Fixed Extension (Erected) 4,830 lbs.
jib capacity.
31-56 ft. Folding Extension (Stowed on Boom Base Section) 1,550 lbs.
31-56 ft. Folding Extension (Erected) 10,700 lbs. NOTE: All load handling devices and
boom attachments are considered part
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
LIFTING OFF 31 FT. BOOM EXTENSION WITH:
20 RT875BXL
of the load and suitable allowances
25 ft. Fly Section (Stowed on Boom Base Section) 440 lbs.
MUST BE MADE for their combined
25 ft. Fly Section (Erected) Not Permitted
weights. Weights are for Grove fur-
25 ft. Fly Section (Stowed on 31 ft. Extension) Not Permitted
nished equipment.
*Reduction of main boom capacities
 360° CENTERLINE
OF OUTRIGGER
CENTERLINE OVER SUPPORT
OF BOOM SIDE

LONGITUDINAL
CENTERLINE
OF CRANE

CG OF OVER OVER
LOAD FRONT REAR

SEE NOTE
AT BOTTOM

DIAGRAM
FOR LIFTING OVER CENTERLINE
ON OUTRIGGERS SIDE OF ROTATION

REAR AXLE
OSCILLATION
LOCKOUTS MUST
BE SET TO
MAINTAIN 360°
BOOM CAPACITIES
CENTERED
OVER FRONT

6°

12°

FRONT

DIAGRAM C6-829-003529
FOR LIFTING C6-829-001159
ON TIRES

BOLD LINES DETERMINE THE LIMITING POSITION OF ANY

LOAD FOR OPERATION WITHIN WORKING AREAS INDICATED

RT875BXL
Grove Worldwide – World Grove China - Representative Office
Headquarters Beijing Hotel Room 6074
1565 Buchanan Trail East No. 33 East Chang An Avenue
P.O. Box 21 Beijing, 100004, China
Shady Grove, Pennsylvania 17256, Tel: [Int + 86] (10) 513-7766
U.S.A. Fax: [Int + 86] (10) 513-7307
Tel: [Int + 1] (717) 597-8121
Fax: [Int + 1] (717) 597-4062 Grove Middle East
Western Hemisphere, Asia/Pacific P.O. Box 290
Dubai, United Arab Emirates
Grove Europe Limited* Tel: (Int + 971) (4) 378400
Sunderland SR4 6TT, England Fax:(Int + 971) (4) 373660
Tel: [Int + 44] 191 565-6281
Fax: [Int + 44] 191 564-0442
Europe, Africa, Middle East Lifetime Customer Support
Western Hemisphere, Asia/Pacific
Deutsche Grove GmbH 1086 Wayne Avenue
Sales and Service Chambersburg, Pennsylvania USA
Helmholtzstrasse 12, Postfach 5026 Tel: [Int + 1] (717) 263-5100
D-40750 Langenfeld, Germany Fax: [Int + 1] (717) 267-0404
Tel: [Int + 49] (2173) 8909-0
Fax: [Int + 49] (2173) 8909-30 Europe, Africa, Middle East
Sunderland SR4 6TT, England
Wilhelmshaven Works Tel: [Int + 44] 191 565-6281
Industriegelande West, Postfach 1853 Parts Fax: [Int + 44] 191 510-9242
D-26358 Wilhelmshaven, Germany Service Fax: [Int + 44] 191 510-9560
Tel: [Int + 49] (4421) 294-0
Fax: [Int + 49] (4421) 294-301

Grove Asia/Pacific - Regional Office

171 Chin Swee Road
#10-09 San Centre
Singapore 0316
Tel: [Int + 65] 536-6112
Fax: [Int + 65] 536-6119
Asia/Pacific, Near East

*Grove Europe Limited, Registered in England,

Number 1845128, Registered office, Crown
Works, Pallion, Sunderland, Tyne & Wear,
England SR4 6TT

Constant improvement and engineering progress make it necessary that we reserve the right to make
specification, equipment, and price changes without notice. Illustrations shown may include optional equipment
and accessories and may not include all standard equipment.

Distributed By:

Form No.: RT875BXL Part No.: 3-1345 899-6M Printed in U.S.A.