DSR-2018

DSR 2021
I.No. Description of Item Unit
Rate (Rs)
Sub-Head : Repairs to Buildings
14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.
meters and under, including cutting the patch in proper shape, raking out
joints and preparing and plastering the surface of the walls complete, including
disposal of rubbish to the dumping ground , all complete as per directions of
Engineer-In-Charge.

14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand). One Square 462.30
Metre
14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand). One Square 478.00
Metre
14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors
or walls cutting masonry for holdfasts, embedding hold fasts in cement
concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement :
3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two
coats of approved wood preservative to sides of chowkhats and making good
the damages to walls and floors as required complete, including disposal of
rubbish to the dumping ground, all complete as per directions of Engineer-In-
Charge.

14.2.1 Door chowkhats . Each 1505.30

14.2.2 Window chowkhats . Each 948.05
14.2.3 Clerestory window chowkhats . Each 712.85

14.3 Fixing chowkhat in existing opening in brick / RCC wall with dash Each 190.25
fasteners/Chemical fasteners of appropriate size (3 nos on each vertical
member of door chowkhat and 2 nos on each vertical member of window
chowkhats), including Cost of dash fasteners/ chemical fastener.

14.4 Making the opening in brick masonry including dismantling in floor or walls by
cutting masonry and making good the damages to walls, flooring and jambs
complete, to match existing surface i/c disposal of mulba/rubbish to the
nearest municipal dumping ground, all complete as per directions of Engineer-
In-Charge.

14.4.1 For door/ window/ clerestory window. One Square 1046.95

Metre
14.5 Renewing glass panes, with putty and nails wherever necessary including
racking out the old putty:
14.5.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). One Square 941.95
Metre
14.5.2 Float glass panes of nominal thickness 5 mm (weight not less than One Square 1245.15
12.5kg/sqm). Metre
14.6 Renewing glass panes, with wooden fillets wherever necessary:

14.6.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). One Square 1351.15
Metre
14.6.2 Float glass panes of nominal thickness 5 mm (weight not less than One Square 1654.30
12.5kg/sqm). Metre
14.7 Renewing glass panes and refixing existing wooden fillets:

14.7.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). One Square 1055.20
Metre

DSR-2018 Page 1 of 20
 DSR 2021
I.No. Description of Item Unit
Rate (Rs)
14.7.2 Float glass panes of nominal thickness 5 mm (weight not less than One Square 1358.35
12.5kg/sqm). Metre
14.8 Supplying and fixing new wooden fillets wherever necessary:
14.8.1 2nd class teak wood fillets . One Running 66.05
Metre

14.8.2 Hollock wood fillets. One Running 59.35

Metre

14.9 Renewal of old putty of glass panes (length) . One Running 46.40
Metre

14.10 Refixing old glass panes with putty and nails . One Square 603.05
Metre
14.11 Fixing old glass panes with wooden fillets (excluding cost of fillets) . One Square 560.60
Metre
14.12 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in Each 468.40
existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement
bar, including cleaning, refilling, making good the chase with matching
concrete, plastering and painting the exposed portion of the clamps complete.

14.13 Regrading terracing of mud phaska covered with tiles or brick, in cement by One Square 577.90
dismantling tiles or bricks, removing mud plaster, preparing the surface of mud Metre
phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks,
grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing
unserviceable tiles or bricks with new ones and disposal of unserviceable
material to the dumping ground (the cost of the new tiles or brick excluded),
all complete as per directions of Engineer-In-Charge.

14.14 Replacing sand stone slabs in roofing, laid in cement mortar 1:4 (1 cement : 4
coarse sand) including necessary repairs and cement pointing with same
mortar complete including disposal of rubbish to dumping ground, all
complete as per directions of Engineer-In-Charge.

14.14.1 Red/ white sand stone slabs 30 to 50 mm thick. One Square 1099.15
Metre
14.15 Renewing wooden battens in roofs, including making good the holes in wall
and painting with oil type wood preservative of approved brand and
manufacture complete including removal of rubbish to the dumping ground,
all complete as per directions of Engineer-In-Charge.

14.15.1 Sal wood battens. One Cubic 92213.65

Metre
14.16 Renewing wooden beams in roofs including making good the holes in walls and
painting with oil type wood preservative of approved brand and manufacture
complete including removal of rubbish to the dumping ground, all complete as
per directions of Engineer-In-Charge.

14.16.1 Not exceeding 4.00 metres in length.

14.16.1.1 Sal wood beams . One Cubic 96739.70

Metre

DSR-2018 Page 2 of 20
 DSR 2021
I.No. Description of Item Unit
Rate (Rs)
14.16.1.2 Hollock wood beams . One Cubic 63238.90
Metre
14.16.2 Above 4.00 metres and upto 5.00 metres length.

14.16.2.1 Sal wood beams . One Cubic 99011.80

Metre
14.16.2.2 Hollock wood beams . One Cubic 65503.80
Metre
14.17 Raking out joints in lime or cement mortar and preparing the surface for re- One Square 59.75
pointing or replastering including disposal of rubbish to the dumping ground, Metre
all complete as per directions of Engineer-In-Charge.

14.18 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2%
of integral water proofing compound by weight of cement for flat tile bricks on
top of mud phaska :

14.18.1 With F.P.S. brick tiles One Square 114.70

Metre
14.18.2 With modular brick tiles One Square 115.95
Metre
14.19 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and One Kilogram 4.45
removing materials to any distance within compound and stacking.

14.20 Fixing of old wind tie with new fittings including painting two or more coats One Running 107.00
with anticorrosive bitumastic paint of approved brand & manufacturer over Metre
and including priming coat of ready mixed zinc chromate yellow primer of
approved brand.

14.21 Renewing bottom rail and/or top runner of collapsible gate including making One Kilogram 246.15
good all damages and applying priming coat of zinc chromate yellow primer of
approved brand and manufacturer.

14.22 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting
and fixing the same with necessary clamps, nuts and bolts / welding and
erection etc. complete.

14.22.1 Wheel 50 mm dia. and below. Per Wheel 150.95

14.22.2 Wheel above 50 mm dia. Per Wheel 253.00
14.23 Pumping out water caused by springs, tidal or river seepage, broken water One Kilo Litre 190.40
mains or drains and the like.

14.24 Mud mortar made with local clay good earth. One Cubic 823.15
Metre
14.25 Brick work with common burnt clay bricks of class designation 7.5 in mud One Cubic 5700.55
mortar Metre
14.26 Providing and fixing 25 mm thick shutters for cup board etc. :

14.26.1 Panelled or panelled & glazed shutters :

14.26.1.1 Superior class teak wood including nickel plated bright finished M.S. piano One Square 4583.60
hinges with necessary screws. Metre
14.26.1.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges One Square 3979.65
with necessary screws. Metre
14.26.2 Glazed shutters :
14.26.2.1 Superior class teak wood including nickel plated bright finished M.S. piano One Square 4555.30
hinges with necessary screws. Metre

DSR-2018 Page 3 of 20
 DSR 2021
I.No. Description of Item Unit
Rate (Rs)
14.26.2.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges One Square 3904.90
with necessary screws. Metre
14.27 Providing and fixing plain jaffri door and window shutters including bright
or/and black enamelled M.S. butt hinges with necessary screws 35x10mm
laths placed 35mm apart (frames to be paid separately) including fixing
50x12mm beading complete with :

14.27.1 Second class teak wood. One Square 4155.75

Metre
14.28 Providing and fixing brass curtain rods of wall thickness 1.25mm with two
brass brackets fixed with brass screws and wooden plugs etc. wherever
necessary complete.

14.28.1 20 mm diameter. One Running 295.20

Metre

14.28.2 25 mm diameter. One Running 362.10

Metre

14.29 Providing and fixing M.S. round or square bars with M.S. flats at required One Kilogram 99.70
spacing in wooden frames of windows and clerestory windows.

14.30 Providing joists (karries) including hoisting, fixing in position and applying wood
preservative on unexposed surface etc. complete with:

14.30.1 Sal wood. One Cubic 91146.55

Metre
14.30.2 Hollock wood. One Cubic 57984.40
Metre
14.31 Providing and fixing bright finished brass single acting spring hinges with
necessary brass screws etc. complete :

14.31.1 150 mm . Each 652.40

14.31.2 125 mm . Each 465.10
14.31.3 100 mm . Each 412.95
14.32 Providing and fixing bright finished brass double acting spring hinges with
necessary brass screws etc. complete :
14.32.1 150 mm Each 726.00
14.32.2 125 mm Each 618.95
14.32.3 100 mm Each 600.25
14.33 Providing and fixing bright finished brass flush bolts with necessary brass
screws etc. complete :
14.33.1 250 mm Each 230.75
14.33.2 150 mm Each 200.55
14.33.3 100 mm Each 147.05
14.34 Providing and fixing 150 mm bright finished floor brass door stopper with Each 233.10
rubber cushion, necessary brass screws etc. to suit shutter thickness
complete .

14.35 Providing and fixing bright finished brass hard drawn hooks and eyes :

DSR-2018 Page 4 of 20
 DSR 2021
I.No. Description of Item Unit
Rate (Rs)
14.35.1 300 mm Each 86.85
14.35.2 250 mm Each 83.35
14.35.3 200 mm Each 74.80
14.35.4 150 mm Each 60.05
14.35.5 100 mm Each 52.70
14.36 Providing and fixing bright finished brass fan light pivot with necessary brass Each 40.20
screws etc. complete.
14.37 Providing and fixing 300 mm long bright finished brass chain with hook for fan Each 64.25
light including necessary brass screws etc. complete.

14.38 Providing and fixing bright finished brass quadrant stay 300mm long with Each 163.25
necessary brass screws etc. complete.

14.39 Providing and fixing bright finished brass helical door spring (superior quality). Each 462.75

14.40 Providing and fixing chromium plated brass butt hinges with necessary
chromium plated brass screws etc. complete.

14.40.1 125x70x4 mm (ordinary type) . Each 172.20

14.40.2 100x70x4 mm (ordinary type) . Each 147.70

14.40.3 75x65x4 mm (heavy type) . Each 164.20

14.40.4 75x40x2.5 mm (ordinary type) . Each 99.40

14.40.5 50x40x2.5 mm (ordinary type) . Each 41.30

14.41 Providing and fixing 85x42mm chromium plated brass pull bolt lock with Each 255.80
necessary chromium plated brass screws, nuts, bolts and washers etc.
complete.

14.72 Providing and fixing double scaffolding system (cup lock type) on the exterior
side, up to seven story height made with 40mm dia. M.S. tube 1.5m centre to
centre horizontal & vertical tubes joining with cup & lock system with M.S.
tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the
scaffolding for working platform etc. and maintaining it in a serviceable
condition for the required duration as approved and removing it there after.
The scaffolding system shall be stiffened with bracings, runners, connection
with the building etc. wherever required for inspection of work at required
locations with essential safety features for the workmen etc. complete as per
directions and approval of Engineer-in-charge .The elevational area of the
scaffolding shall be measured for payment purpose. The payment will be made
once irrespective of duration of scaffolding.

Note: - This item to be used for maintenance work judicially, necessary One Square 285.00
deduction for scaffolding in the existing item to be done. Metre

DSR-2018 Page 5 of 20
 DSR 2021
I.No. Description of Item Unit
Rate (Rs)
14.73 Providing and fixing bright finished brass casement window fasteners or peg One Kilogram 484.30
stays to windows/ ventilators with necessary welding and machine screws etc.
complete.

14.74 Providing and fixing 14 mm bright finished brass spring catch to steel centre Each 59.40
hung ventilators with necessary welding and machine screws etc. complete.

14.75 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and One Square 540.35
under, including cutting the patch in proper shape, raking out joints and Metre
preparing plastering the wall surface with white cement based polymer
modified self curing mortar, including disposal of rubbish, all complete as per
the direction of Engineer-In- Charge.

14.75A Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre One Litre 0.40
capacity at all heights with coconut brushes, duster etc., removal of silt,
rubbish from the tank and cleaning the tank with fresh water disinfecting with
bleaching powder @ 0.5gm per litre capacity of tank, including marking the
date of cleaning on the side of tank body with the help of stencil and paint and
disposing of malba, all complete as per direction of Engineer-in-Charge. (The
old date already written on tank should be removed with paint remover or
black paint and if date is not written with the stencil or old date is not removed
deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or
ball cock is damaged that is to be repaired by contractor at his own cost and
nothing extra will be paid on this account)

14.76 Cleaning and de-silting of gully trap chamber, including removal of rubbish Each 89.45
mixed with earth etc. and disposal of same, all as per the direction of Engineer-
in-charge.

14.77 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic One Metre 285.90
operated high pressure suction cum jetting sewer cleaning machine fitted with
pump having 4000 litres suction capacity and 6000 litres water jetting tank
capacity including skilled operator, supervising engineer etc. for cleaning and
partial de-silting of manholes and de-chocking of sewer lines. De-chocking and
flushing of sewer line from one manhole to another by high pressure jetting
system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all
depth.

14.78 Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging)
including disposal of slit and rubbish, all as per direction of Engineer-in-Charge.
The cleaning shall consist following operations:-

(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit
and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire
brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles
shall be removal from the surface.

DSR-2018 Page 6 of 20
 DSR 2021
I.No. Description of Item Unit
Rate (Rs)
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per One Square 71.30
direction of Engineer-in-Charge. Metre
14.79 Disconnecting damaged overhead/terrace PVC water storage tank of any size Each 357.55
from water supply line and removing from the terrace including shifting at
ground level as per direction of Engineer-in- charge.

14.80 Providing & fixing White vitreous china water closet squatting pan (Indian
type) along with "S" or "P" trap including dismantling of old WC seat and "S" or
"P" trap at site complete with all operations including all necessary materials,
labour and disposal of dismantled material i/c malba, all complete as per the
direction of Engineer-in charge.

14.80.1 Long pattern W.C Pan of size 580x440 mm Each 2962.80

14.80.2 Orissa pattern W.C Pan of size 580x440 mm Each 3850.65
14.81 Cutting holes of required size in brick masonry wall for fixing of exhaust fan Each 243.10
including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and
making good the same etc. complete as per direction of Engineer-in-charge.

14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c Each 110.70
malba all complete as per directions of Engineer-in- Charge.

14.83 Hacking of CC flooring including cleaning for surface etc. complete as per One Square 2.85
direction of the Engineer-in-Charge. Metre
14.84 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes
(within 50 metres lead) as per direction of Engineerin-Charge.

(a) Internal Work- Exposed on wall One Metre 2.85

14.85 Taking out existing wooden door shutter, repair by cutting, painting etc. and Each 325.95
refixing of repaired door shutters to existing door frames, including
replacement of hinges with screws, etc. as required, all complete as per the
direction of the Engineer-in-charge.

14.86 Providing and laying in situ seven course water proofing treatment with APP
(Atactic poly-propylene) modified Polymeric membrane over roof consisting of
first coat of bitumen primer @ 0.40Kg per sqm, 2nd, 4th & 6th courses of
bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of
grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane
APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight
consisting of five layers prefabricated with centre core as 20micron HMHDPE
film sandwiched on both sides with polymeric mix and the polymeric mix is
protected on both side with 20micron HMHDPE film.

7th, the top most layer shall be finished with brick tiles of class designation 10 One Square 615.00
grouted with cement mortar 1:3(1cement:3 fine sand) mixed with 2% integral Metre
water proofing compound by weight of cement over a 12mm layer of cement
mortar 1:3 (1 cement: 3 fine sand) and finished neat ( item of laying brick tiles
shall be paid for separately).

DSR-2018 Page 7 of 20
 DSR 2021
I.No. Description of Item Unit
Rate (Rs)
14.87 Providing and laying in situ five course water proofing treatment with APP
(Atactic Polypropylene) modified Polymeric memberane over roof consisting of
first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of
bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of
grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP
modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting
of five layers prefabricated with centre core as 100 micron HMHDPE film
sandwiched on both sides with polymeric mix and the polymeric mix is
protected on both side with 20 micron HMHDPE film. 5th, the top most layer
shall be finished with brick tiles of class designation 10 grouted with cement
mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing
compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1
cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid
for separately).

7th, the top most layer shall be finished with brick tiles of class designation 10 One Square 454.80
grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% Metre
integral water proofing compound by weight of cement over a 12 mm layer of
cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying
brick tiles shall be paid for separately).

14.88 Providing and laying in situ seven course water proofing treatment with APP
(Atactic Polypropylene) modified Polymeric memberane over roof consisting of
first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of
bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of
grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane
APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight
consisting of five layers prefabricated with centre core as 100 micron HMHDPE
film sandwiched on both sides with polymeric mix and the polymeric mix is
protected on both side with 20 micron HMHDPE film.

7th, the top most layer shall be finished with brick tiles of class designation 10 One Square 732.75
grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% Metre
integral water proofing compound by weight of cement over a 12 mm layer of
cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying
brick tiles shall be paid for separately).

14.89 Providing and fixing APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 2 mm thick water proofing membrane , black finished
reinforced with glass fibre matt consisting of a coat of bitumen primer for
bitumen membrane @ 0.40 litre/sqm by the samemembrance manufacture of
density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer
coat the layer of membrane shall be laid using Butane torch and sealing all
joints etc., and preparing the surface complete.

DSR-2018 Page 8 of 20
 DSR 2021
I.No. Description of Item Unit
Rate (Rs)
The vital physical and chemical parameters of the membrane shall be as
under : Joint strength in longitudinal and transverse direction at 23°C as
350/300 N/ 5 cm. Tear strength in longitudinal and transverse direction as
60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall
be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of
membrane shall be got done through the authorised applicator of the
manufacture of membrane.

14.89.1 2mm (for corrugated roof sheets) One Square 445.80

Metre
14.90 Providing and laying APP (Atactic Polypropylene Polymer) modified
prefabricated five layer, 3 mm thick water proofing membrane, black finished
reinforced with glass fibre matt consisting of a coat of bitumen primer for
bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of
density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer
coat the layer of membrane shall be laid using butane torch and sealing all
joints etc., and preparing the surface complete. The vital physical and chemical
parameters of the membrane shall be as under : Joint strength in longitudinal
and transverse direction at 23°C as 350/300 N/5 cm.

Tear strength in longitudinal and transverse direction as 60/80N. Softening

point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when
tested in accordance with ASTM, D - 5147. The laying of membrane shall be
got done through the authorised applicator of the manufacturer of
membrane :

14.90.1 3 mm thick One Square 534.10

Metre
14.91 Providing and laying APP (Atactic Polypropylene Polymer) modified
prefabricated five layer 3 mm thick water proofing membrane, black finished
reinforced with non-woven polyester matt consisting of a coat of bitumen
primer for bitumen membrane @ 0.40 litre/sqm by the same membrane
manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps.
Over the primer coat the layer of membrane shall be laid using Butane Torch
and sealing all joints etc, and preparing the surface complete.

The vital physical and chemical parameters of the membrane shall be as

under : Joint strength in longitudinal and transverse direction at 23°C as 650/
450N/ 5cm. Tear strength in longitudinal and transverse direction as
300/250N. Softening point of membrane not less than 150°C. Cold flexibility
shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying
of membrane shall be got done through the authorised applicator of the
manufacturer of membrane :

14.91.1 3 mm thick One Square 563.50

Metre
14.92 Extra for covering top of membrane with Geotextile, 120 gsm non woven, One Square 103.50
100% polyester of thickness 1 to 1.25 mm bonded to the membrane with Metre
intermittent touch by heating the membrane by Butane Torch as per
manufactures recommendation.

DSR-2018 Page 9 of 20
 DSR 2021
I.No. Description of Item Unit
Rate (Rs)
14.93 Providing round the clock security guard without gun for watch & ward of Each Job 1077.30
Government premises and its all belongings by deploying neatly dressed
security guards in 8 hour’s shift including necessary T&P like torch, lathi and
uniform etc.complete,as per the direction of Engineer-in-charge.(One job
means 8 hour’s duty).

14.94 Providing round the clock security guard with gun for watch & ward of Each Job 1169.65
Government premises and its all belongings by deploying neatly dressed
security guards in 8 hour’s shift including necessary T&P like torch, lathi and
uniform etc.complete, as per the direction of Engineer-in-charge.(One job
means 8 hour’s duty).

DSR-2018 Page 10 of 20
 DSR 2018
Rate (Rs)

Repairs to plaster of 12 mm to 20
mm in patches of areas 2.50 Sqm
and under :

417.80 with cement mortar 1:4 (FS).

429.60 With cement mortar 1 : 4 (1

cement : 4 coarse sand).
Fixing chowkhats in existing
opening :

1366.85 Door chowkhat.

858.90 Windows chowkhat.
637.85 Clerestory windows chowkhat.

193.95 Fixing chowkhat in existing

opening in brick/RCC wall with
desh fasteners.

Making the opening in brick

masonry including dismantling,
floor, walls:

932.45 For door/ window/ clerestory

window.
Renewing glass panes with putty,
nails :
890.50 Float Glass panes 4 mm thick.

1184.85 Float Glass 5.5mm thick.

Renewing glass panes with

wooden fillets :
1263.00 Float Glass panes 4 mm thick.

1557.35 Glass panes 5.5 mm thick.

Renewing glass panes with

existing wooden fillets :
989.85 Glass panes 4.00 mm thick.

DSR-2018 Page 11 of 20
 DSR 2018
Rate (Rs)
1284.20 Glass panes 5.5 mm thick.

S/F new wooden fillets :

61.50 Ist class teak wood.

54.70 Hollock wood fillets.

42.60 Renewal of old putty of glass

panes.

554.05 Refixing old glass panes with putty

and nails
510.75 Fixing old glass with wooden
fillets.
425.10 P/f 16 mm M.S. Fan clamps of
standard shape and size in existing
R.C.C. slab.

521.60 Regrading terracing of mud phaska

covered with tiles or bricks

Replacing sand stone slabs in

roofing laid in CM 1: 4 CS :

957.70 Red/ White sand stone slabs 30 to

50 mm thick.
Renewing wooden battens in
roofs, i/c making good the holes in
wall and painting with oil type
wood preserva- tive :

91114.45 Sal wood battens.

Renewing wooden beams in roofs

i/c making good the holes in walls
& painting with oil type wood
preservative :

Not exceeding 4.00 metres in

length :
95325.80 Sal wood beams.

DSR-2018 Page 12 of 20
 DSR 2018
Rate (Rs)
60859.95 Hollock wood beams.

Above 4.00 m and upto 5.00 m

length.
97267.00 Sal wood beams.

62765.35 Hollock wood beams.

51.70 Raking out joints in lime or cement

mortar and preparing the surface .

Pointing with cement mortar 1 : 3

fine sand for flat tile brick on top
of tile roof :

103.45 Flush pointing on tile work.

104.65 With modular brick tiles.

4.00 Taking out wind ties from roof

including cutting out rusted bolts,
nuts etc.

102.60 Fixing of old wind tie with new

fittings.

224.60 Renewing bottom rail and/or top

runner of collapsible gate i/c
making good all damages.

Renewing W.I. or M.S. Wheel or

roller of steel door/gate :

146.75 Wheel 50 mm dia. and below.

240.45 Wheel above 50 mm dia.
169.05 Pumping out watger caused by
springs, tidal/river seepage,
broken water mains or drains and
the like.

737.00 Mud mortar.

5281.35 Brick work with bricks of class

designation 75 in mud mortar.
P/F 25 mm thick shutters for cup
board etc. :
Panelled or panelled and glazed
shutters :
4456.60 Superior class teak wood

3852.70 Ist class teak wood

Glazed shutters :
4448.45 Superior class teak wood

DSR-2018 Page 13 of 20
 DSR 2018
Rate (Rs)
3798.05 Ist class teak wood

P/F plain jaffri door & window

shutters i/c bright or/& black
enamelled M.S. butt hinges :

4069.70 Second class teak wood.

P/F curtain rods of 1.25 mm thick

brass plates with two brass
brackets :

292.90 20 mm diameter.

359.80 25 mm diametre.

92.05 P/F M.S. round or square bars with

M.S. flats at required spacings in
wooden frames of windows &
clerestory windows.

Providing joists (karries) including

hoisting fixing in position :

90056.65 Sal wood.

55939.25 Hollock wood.

Removing existing door of area

not more than 3.00 sqm and
refixing the same attending
necessary repairs using new hold
fasts etc., as directed.

647.55 150 mm.

460.25 125 mm.
408.10 100 mm.
P/F bright finished brass double
acting spring hinges:
721.15 150 mm.
614.10 125 mm.
595.40 100 mm.
P/F bright finished brass bolts :

229.45 250 mm.

199.50 150 mm.
145.95 100 mm.
232.50 P/F 150 mm bright finished floor
brass door stopper with rubber
cushion.

P/F bright finished brass hard

drawn hooks and eyes :

DSR-2018 Page 14 of 20
 DSR 2018
Rate (Rs)
86.45 300 mm.
82.95 250 mm.
74.40 200 mm.
59.70 150 mm.
52.35 100 mm.
39.70 P/F bright finished brass fan light
pivot.
63.65 P/F 300 mm long bright fini- shed
brass chain with hook for fan light.

162.65 P/F bright finished brass quadrant

stay 300 mm long with necessary
screws.

457.90 P/F bright finished brass helical

door spring (superior quality).

P/F chromium plated brass butt

hinges with necessary screws:

170.10 125 x 70 x 4 mm (Ordinary type).

145.60 100 x 70 x 4 mm (ordinary type).

162.15 75 x 65 x 4 mm (heavy type).

97.35 75 x 40 x 2.5 mm (ordinary type).

40.80 50 x 40 x 2.5 mm (ordinary type).

245.20 P/F 85 x 42 mm chromium plated

brass pull bolt lock.

P/F double sacffolding system

(cuplock type)on the exterior side,
upto seven story height made with
40 mm dia. MS tube 1.50 m c/c
horizontal and vertical tubes
joining with cup and lock system.

257.95

DSR-2018 Page 15 of 20
 DSR 2018
Rate (Rs)
473.90 P/F double sacffolding system on
the exterior side, upto seven story
height made with 100/75 mm dia.
wooden posts 1.50 m c/c
horizontal and vertical posts
joining with rope and nail, clamps
etc. system.

57.30 Carrying out repair works to worn

out chajjas...

512.00 Repair to plaster of thickness

12mm to 20 mm in patches of
area 2.5 sqm

0.35 Cleaning of terrace/loft water

storage tank (inside surface area)
upto 2000 litre capacity ........ with
white cement based polymer
modified self curing mortar

77.65 Cleaning and de-silting of gully

trap chamber

256.90 Cleaning of chocked sewer line by

diesel running vehicle mounting
hydraulic operated high pressure
suction cum jetting sewer cleaning
machine

Cleaning of under ground sump,

Over Head R.C.C. Tank
(independent staging)

DSR-2018 Page 16 of 20
 DSR 2018
Rate (Rs)
63.70

317.75 Disconnecting damaged

overhead/terrace PVC water
storage tank

Providing & fixing White vitreous

china water closet squatting pan
(Indian type) along with "S" or "P"

2724.10 Long pattern

3537.80 Orissa pattern
220.40 Cutting holes of required size in
brick masonry wall for fixing of
exhaust fan including providing
and fixing 300 mm dia PVC pipe

96.00 Dismantling W.C. Pan of all sizes

including disposal

2.50 Hacking of CC flooring including

cleaning for surface
Dismantling 15 to 40 mm dia G.I.
pipe, (a) Internal Work- Exposed
on wall

2.70
297.85 Taking out existing wooden door
shutter, repair by cutting, painting
etc. and refixing of repaired door

P & L seven course APP...........3rd

and 5th layers of roofing
membrane APP modified
Polymeric membrane 1.5mm thick
of 2.25 Kg/sqm................7th, the
top most layer shall be finished
with brick tiles of class designation
10 grouted with cement mortar
1:3(1cement:3 fine sand) mixed
with 2% integral water proofing

592.65

DSR-2018 Page 17 of 20
 DSR 2018
Rate (Rs)
P & L five course APP..... ..... 3rd
layer of roofing membrane APP
modified Polymeric membrane 2.0
mm thick of 3.00 Kg/ sqm
weight ..... .5th, the top most
layer shall be finished with brick
tiles of class designation 10
grouted with cement mortar
1:3(1cement:3 fine sand) mixed
with 2% integral water proofing

408.75

Providing and laying in situ seven

course water proofing treatment
with APP (Atactic Polypropylene)
memberane .......3rd and 5th
layers of roofing membrane APP
modified Polymeric membrane 2.0
mm thick of 3.00 Kg/sqm
weight ........7th, the top most
layer shall be finished with brick
tiles of class designation 10
grouted with cement mortar 1:3

651.50

Providing and fixing APP (Atactic

Polypropylene Polymer) modified
prefabricated five layer 2 mm
thick water proofing membrane ,
black finished reinforced with
glass fibre matt

DSR-2018 Page 18 of 20
 DSR 2018
Rate (Rs)
2mm

419.75

Providing and laying APP (Atactic

Polypropylene Polymer) modified
prefabricated five layer, 3 mm
thick water proofing membrane,
black finished reinforced with
glass fibre matt........ Joint strength
in longitudinal and transverse
direction at 23°C as 350/300 N/5
cm.

512.95 3mm

Providing and laying APP (Atactic

Polypropylene Polymer) modified
prefabricated five layer 3 mm
thick water proofing membrane,
black finished reinforced with non-
woven polyester
matt ..................Joint strength in
longitudinal and transverse
direction at 23°C as 650/ 450N/
5cm.

535.00 3mm

99.75 Extra for covering top of

membrane with Geotextile, 120
gsm non woven, 100% polyester
of thickness 1 to 1.25

DSR-2018 Page 19 of 20
 DSR 2018
Rate (Rs)
732.55 Providing round the clock security
guard without gun

803.85 Providing round the clock security

guard with gun

DSR-2018 Page 20 of 20