Most Important Topics of

Information & Communication

Technology (ICT)

NTA UGC NET

By Abhishek Kumar Jha

(Research Scholar UGC - JRF)
Use Referral code: ABHISHEKJ for 10 % discount
Use my referral code: ABHISHEKJ to get additional 10% discount

Use my referral code: ABHISHEKJ

Use Referral code: ABHISHEKJ for 10 % discount
Use Referral code: ABHISHEKJ for 10 % discount
Understand Input
& Output Devices
Information & Communication
Technology (ICT)

Paper – I: Unit-VIII
Use Referral code: ABHISHEKJ for 10 % discount
Computer: A computer is a truly amazing machine that performs a specified
sequence of operations as per the set of instructions (known as programs)
given on a set of data (input) to generate desired information (output ).
A complete computer system consists of four parts:
Hardware: Hardware represents the physical and tangible components of the
computer.
Software: Software is a set of electronic instructions consisting of complex
codes (Programs) that make the computer perform.
User: The computer operators are known as user.
Data: Consists of raw facts, which the computer stores and reads in the form
of data.

Teaching & Research Aptitude by Abhishek Kumar Jha

Unacademy Plus
The main 5 generation of Computers-

S. No. Generation & Description

1 First Generation (1946-1959) – Vacuum tube based

2 Second Generation (1959-1965) – Transistor based

3 Third Generation (1965-1971) – Integrated Circuit based

4 Fourth Generation (1971-1980) – VLSI microprocessor based

5 Fifth Generation (1980-onwards) – ULSI microprocessor based

*Ultra Large Scale Integration

Teaching & Research Aptitude by Abhishek Kumar Jha
Unacademy Plus
Basic Computer Components
Input devices- Keyboard, Image scanner, Microphone, Pointing device, Graphics tablet,
Game controller, Light pen, Mouse (Optical), Pointing stick, Touchpad, Touchscreen
,Trackball, Refreshable braille display Sound card, Webcam (Softcam), Video card.
Output Devices- Monitor (Screen), Refreshable braille display, Printer (Plotter),
Speakers, Sound card, Video card.
Removable data storage- Optical disc (CD, DVD, Blu-ray), Disk pack, Floppy disk,
Memory card, USB flash drive.
Computer case- Central processing unit (CPU)HDD / SSD / SSHD, Motherboard,
Network interface controller, Power supply, Random-access memory (RAM), Fax modem,
Expansion card.
Ports- Ethernet, FireWire, Parallel port, Serial port, PS/2 port, USB, Thunderbolt,
Display Port / HDMI / DVI / VGA, eSATA, Audio jack.

Teaching & Research Aptitude by Abhishek Kumar Jha

Unacademy Plus
Introduction with Computing Devices
Input Devices-
In computing, an input device is a piece of computer hardware equipment used to provide
data and control signals to an information processing system such as a computer or
information appliance.
Examples of input devices include-
keyboards, mouse, scanners, digital cameras, joysticks, and microphones.

Teaching & Research Aptitude by Abhishek Kumar Jha

Unacademy Plus
Output Devices-
An output device is any piece of computer hardware equipment which converts
information into human-readable form. It can be text, graphics, tactile, audio, and video.
Some of the output devices are Visual Display Units (VDU) for examples-
Monitor, Printer, Graphic Output devices, Plotters, Speakers etc.

Teaching & Research Aptitude by Abhishek Kumar Jha

Unacademy Plus
Computer hardware consists of the following components:
CPU (Central Processing Unit): CPU is considered as the brain of the computer. It
performs all types of data processing operations, stores data, intermediate results and
instructions (program). It controls the operation of all parts of computer.
The relationship between different hardware Components-

Teaching & Research Aptitude by Abhishek Kumar Jha

Unacademy Plus
CPU itself has following three components:
ALU (Arithmetic Logic Unit): When the control unit encounters an
instruction that involves mathematical calculation or decision/logic, it passes
the control to the second component, i.e., the arithmetic logic unit (ALU).
The ALU includes a group of registers – memory locations built directly into
the CPU – that are used to hold data that are being processed by the current
Registers: The register is the smallest high-speed storage area in the CPU.
All data must be represented in a register first.
Control Unit: This unit controls the operations of all parts of computer but
does not carry out any actual data processing operations.

Teaching & Research Aptitude by Abhishek Kumar Jha

Unacademy Plus
Memory of Computer
A memory is just like a human brain. It is used to store data and instructions. Computer
memory is the storage space in a computer where data is to be processed and instructions
required for processing are stored. The memory is divided into a large number of small
parts called cells. Each location or cell has a unique address which varies from zero to
memory size minus one.
Memory is primarily of three types –
Cache Memory: It is a very high-speed semiconductor memory which can speed up CPU.
It acts as a buffer between the CPU and main memory.
Primary Memory/Main Memory: Primary memory holds only those data and
instructions on which computer is currently working. It has limited capacity and data is
lost when power is switched off.
Secondary Memory: This type of memory is also known as external memory or non-
volatile. It is slower than main memory. These are used for storing data/Information
permanently.
Teaching & Research Aptitude by Abhishek Kumar Jha
Unacademy Plus
Primary memory of CPU consists of mainly two types of memories:
1. Random Access Memory (RAM): RAM is the internal memory of the CPU for storing
data, program and program result. It is read/write memory which stores data until the machine
is working. As soon as the machine is switched off, data is erased.
RAM is volatile, i.e. data stored in it is lost when we switch off the computer or if there is a
power failure. Hence a backup uninterruptible power system (UPS) is often used with
computers. RAM is small, both in terms of its physical size and in the amount of data it can
hold.
There are mainly three types of RAM available:
a. Dynamic Random Access Memory (DRAM): A type of physical memory used in most
personal computers. The term dynamic indicates that the memory must be constantly
refreshed2 (reenergized) or it loses its contents. This type of memory is more
b. Static Random Access Memory (SRAM): A type of memory that is faster and less volatile
than DRAM, but requires more power and is more expensive. The term static is derived from
the fact that it does not need to be refreshed.
c. Synchronous Dynamic Random Access Memory (SDRAM): A type of DRAM that can run
at much higher clock.
Teaching & Research Aptitude by Abhishek Kumar Jha
Unacademy Plus
2. Read Only Memory (ROM): The memory from which we can only read but can not
write on it . This type of memory is non-volatile.
The information is stored permanently in such memories during manufacture. A ROM, stores
such instructions that are required to start a computer. This operation is referred to as
bootstrap.
There are mainly three types of ROM available:
MROM (Masked ROM): The very first ROMs were hard-wired devices that contained a
pre-programmed set of data or instructions. These kinds of ROMs are known as masked
ROMs which are contents are programmed by the integrated circuit manufacturer (rather
than by the user).
EPROM (Erasable and Programmable Read Only Memory): The EPROM can be erased
by exposing it to ultra-violet light for a duration of up to 40 minutes. Usually, an EPROM
eraser achieves this.
EEPROM (Electrically Erasable and Programmable Read Only Memory): The
EEPROM is programmed and erased electrically. It can be erased and reprogrammed about
ten thousand times. Both erasing and programming take about 4 to 10 ms (milli second).
Teaching & Research Aptitude by Abhishek Kumar Jha
Unacademy Plus
1. Secondary Storage (External Storage Devices): Floppy diskettes, hard disk, tapes and
optical disks come under the category of external storage devices or ancillary storage
devices. These devices are very sensitive to environmental conditions (humidity and
temperature) as well as to external magnetic fields and need to be stored.
Floppy Disk: Floppy disks are primarily used on PCs. Information on a floppy disk is
recorded in the magnetized states of particles of iron oxides evenly placed upon concentric
circles known as Tracks.
Hard Disk: It is a non-removable enclosed magnetic disk included in most PCs. It contains a
stack of metal platters, each coated with iron oxide, that spin on a spindle and the entire unit
is encased in a sealed chamber.
Magnetic Tape: This is plastic tape, usually made of Mylar that is coated with iron oxide,
thereby enabling the introduction (writing); retention (memory) and reading of magnetically
recorded information. The best use of tape storage is for data that you do not use very often.

Teaching & Research Aptitude by Abhishek Kumar Jha

Unacademy Plus
2. Peripherals: Peripheral devices are devices connected to the computer externally. If a
peripheral device is disconnected, the computer will still be able to work; only functions
performed by this peripheral device will not be available.
Mainly there are following types of peripheral devices:
A. Input Devices (How to tell it what to do): This unit makes a link between user and
computer. The input devices translate the information into the form understandable by
Keyboard- The most common and very popular input device which helps in inputting data
to the computer.
Mouse- Mouse is the most popular pointing device and cursor-control device having a
small palm size box with a round ball at its base which senses the movement of mouse and
sends corresponding signals to CPU when the mouse buttons are pressed.
Joy Stick- To move cursor position on a monitor screen. It is mainly used in Computer
Aided Designing (CAD) and playing computer games.
Light pen- It is used to select a displayed menu item or draw pictures on the monitor
screen.
Teaching & Research Aptitude by Abhishek Kumar Jha
Unacademy Plus
Track Ball- Mostly used in notebook or laptop computer, instead of a mouse. This is a ball
which is half inserted and by moving fingers on ball, pointer can be moved.
Scanner- A scanner allows you to scan printed material and convert it into a file format
that may be used within the PC.
Digitizer- It converts analog information into digital form.
Microphone-Microphone is an input device to input sound that is then stored in digital
form.
Magnetic Ink Character Recognition (MICR)- MICR input device is generally used in
banks because of a large number of checks to be processed every day.
Optical Character Reader (OCR)- OCR scans text optically character by character,
converts them into a machine-readable code and stores the text on the system memory.
Bar Code Reader- A device used for reading bar coded data (data in the form of light and
dark lines). Barcoded data is generally used in labeling goods, numbering the books.
Optical Mark Reader(OMR)- A special type of optical scanner used to recognize the
type of mark made by pen or pencil.
Teaching & Research Aptitude by Abhishek Kumar Jha
Unacademy Plus
B. Output Devices: (How it shows you what it is doing) Output devices translate the
computer’s output into the form understandable by
Monitors: Monitors, commonly called as Visual Display Unit (VDU), are the main output
device of a computer. It forms images from tiny dots, called pixels that are arranged in a
rectangular form. The sharpness of the image depends upon the number of pixels.
There are two kinds of viewing screen used for monitors.
Cathode-Ray Tube (CRT): The CRT display is made up of small picture elements called
pixels. The smaller the pixels, the better the image clarity, or resolution
Flat- Panel Display: The flat-panel display refers to a class of video devices that have
reduced volume, weight and power requirement in comparison to the computer.

Teaching & Research Aptitude by Abhishek Kumar Jha

Unacademy Plus
Printer: Printer is an output device, which is used to print information on paper.
Impact Printers: The impact printers print the characters by striking them on the ribbon
which is then pressed on the computer.
Non-Impact Printers: Non-impact printers print the characters without using ribbon.
These printers print a complete page at a time so they are also called as Page Laser
Printers, Inkjet Printers.
Notes:
Data: Data can be defined as a representation of facts, concepts or instructions in a
formalized manner which should be suitable for communication, interpretation, or
processing by human or electronic
Information:- Information is organized or classified data which has some meaningful
values for the receiver. Information is the processed data on which decisions and actions
are in computer.
Data Processing Cycle: Data processing is the re-structuring or re-ordering of data by
people or machine to increase their usefulness and add values for particular Data
processing consists of basic steps input, processing and output.

Teaching & Research Aptitude by Abhishek Kumar Jha

Unacademy Plus
These three steps constitute the data processing cycle.
Input- Input data is prepared in some convenient form for processing. The form will
depend on the processing machine. For example, when electronic computers are used, the
input data could be recorded on any one of several types of input medium, such as
magnetic disks, tapes and so on.
Processing – In this step input data is changed to produce data in a more useful form. For
example, paychecks may be calculated from the time cards, or a summary of sales for the
month may be calculated from the sales orders.
Output – The result of the proceeding processing step are collected. The particular form of
the output data depends on the use of the data. For example, output data may be pay-
checks for employees.

Teaching & Research Aptitude by Abhishek Kumar Jha

Unacademy Plus
 Use my referral code: ABHISHEKJ to get additional 10% discount

Please Give Your Feedback After The Session