Printing a Configuration Page

Contents

HP LaserJet M3027 and M3035 mfp .. 5

HP Multi Function & All-in-one Color
LaserJet ...................................................4 HP LaserJet M5025 and M5035mfp ... 6

HP Color LaserJet 4730mfp ................. 4 HP Color LaserJet .....................................6

HP Color LaserJet 8500/8550mfp ........ 4 HP Color LaserJet 1500 ....................... 6

HP Color LaserJet 9500mfp ................. 4 HP Color LaserJet 1600 ....................... 6

HP Color LaserJet 2820/2830/2840 AiO HP Color LaserJet 2500 /2550............. 6
............................................................. 4
HP Color LaserJet 2600n ..................... 6
HP Color LaserJet
CM1015mfp/CM1017mfp ................... 4 HP Color LaserJet 2605 ....................... 6

HP Multi Function & All-in-one LaserJet ....4 HP Color LaserJet 2700/2700n ........... 6

HP LaserJet 3030 ................................. 4 HP Color LaserJet 3800/3600/3000 .... 6

HP LaserJet 3015 ................................. 4 HP Color LaserJet 4700/ CP4005 ........ 6

HP LaserJet 3050 AiO........................... 4 HP Color LaserJet 5500/5550 ............. 6

HP LaserJet 3052/3055 AiO ................. 4 HP Color LaserJet 9500 ....................... 7

HP LaserJet 3020 ................................. 5 Mono LaserJet .........................................7

HP LaserJet 3380 ................................. 5 HP LaserJet 1010/1012/1015/1018 .... 7

HP LaserJet 3390/3392 AiO ................. 5 HP LaserJet 1020................................. 7

HP LaserJet 4100 mfp .......................... 5 HP LaserJet

1160/1320/1150/1300/1022.............. 7
HP LaserJet 4345mfp ........................... 5
HP LaserJet 2400/2410/2420/2430 .... 7
HP LaserJet 8100/8150mfp ................. 5
HP LaserJet
HP LaserJet 9040mfp/9050mfp ........... 5 4350/4200/4300/4240/4250.............. 7
HP LaserJet 9055/9065mfp ................. 5 HP LaserJet 5100................................. 7
HP LaserJet M1005 mfp....................... 5 HP LaserJet 5000/5200 ....................... 7

Page | 1
Printing a Configuration Page
H
HP LaserJet 8150 ................................. 7 WorkCentre™ 7228/7235/7245 ......... 9

HP LaserJet 9000/ 9040/ 9050 ............ 7 WorkCentre™ 7655/7665 ................. 10

HP LaserJet P2015 ............................... 7 Xerox: Black and White Multifunction .... 10

HP LaserJet P3005 ............................... 7 WorkCentre™ 232/238 ..................... 10

HP Legacy Products ..................................8 WorkCentre™ 245/255/265/275 ...... 10

HP Multi Function & All-in-one LaserJet 8 WorkCentre™ 4150........................... 10

HP Color LaserJet..................................8 Xerox Advanced Multifunction ............... 10

HP Color LaserJet 5 Series ................... 8 WorkCentre™ 7228/7235/7245 ....... 10

HP LaserJet 9000mfp ........................... 8 WorkCentre™ 7655/7665 ................. 10

HP Color LaserJet LJ4600/ 4610/ 4650 8 WorkCentre™ Pro

232/238/245/255/265/275 .............. 11
HP Mono LaserJet .................................8
WorkCentre™ 4150........................... 11
HP LaserJet 5 Series ............................. 8
WorkCentre™ Pro 75/90................... 11
HP LaserJet 5Si ..................................... 8
Xerox Color Printers ...............................11
HP LaserJet 8100 ................................. 8
Phaser™ 8500/8550 .......................... 11
HP Office Jets, Desk Jets, Design Jets &
Ink Jets.................................................8 Phaser™ 6300/6350 .......................... 11

Business Inkjet 1000 ............................ 8 Phaser™ 540/550/560/740/ ............. 11

Office Jet 9100 series........................... 8 600/340/360/380 ............................. 11

Desk Jet 460 ......................................... 8 Xerox Black and White Printers .............. 12

Desk Jet 1100c ..................................... 9 Phaser™ 3500 ................................... 12

HP DeskJet 1120C Series ..................... 9 Phaser™ 4500 ................................... 12

HP Design Jet 700 Series...................... 9 DocuPrint Nxx-Series, Nxx25-Series,

and Phaser 1235/2135/5400 ............ 12
Xerox Color Multifunction ........................9
DocuPrint Nxx-Series, Nxx25-Series,
Phaser™ 6110MFP ............................... 9 and Phaser 1235/2135/5400 ............ 12
Phaser™ 8560MFP ............................... 9 Dell........................................................12
Xerox Color Advanced Multifunction ........9 Dell Laser Printer 5210n/ 5310n ....... 12

Page | 2
Printing a Configuration Page
H
Dell™ Color Laser Printer 5110cn ...... 12 AcuLaser C4100, AcuLaser C4200,
AcuLaser C8500, AcuLaser C8600,
Dell™ Workgroup Laser Printer AcuLaser C900, AcuLaser C9100,
W5300n/ Dell™ Workgroup Laser AcuLaser CX11N, AcuLaser CX11NF,
Printer M5200n ................................. 12 COLOR Copy Station 8200, COLOR
Dell Workgroup Laser Printer Copy Station 8500, COLOR Copy
S2500/S2500N ................................... 13 Station 8600, EPL-5800, EPL-5900, EPL-
6100, EPL-6200, EPL-C8200, EPL-
Dell™ 1600n (Multifunction Laser) .... 13 N2050+, EPL-N2750, EPL-N3000, EPL-
N4000, EPL-N4000+, EPL-N7000....... 14
Lexmark.................................................13
Kyocera .................................................14
Lexmark C500n .................................. 13
FS-9130DN/ FS-9120DN / FS-9520DN/
Lexmark 4600 MFP ............................ 13
FS-C8026N/ FS-C8008N/ FS-
Lexmark E450dn ................................ 13 C8008DN/FS-C5015N/ FS-C5025N/ FS-
C5030N/ ............................................ 14
Epson ....................................................13
FS-6950DN/ FS-800/ FS-7000 ........... 14
Multi Function & Laser Printers......... 13
FS-1018 MFP ..................................... 14
Epson AcuLaser C3800n .................... 13
KM 1820/ FS-1118MFP ..................... 14
Epson AcuLaser CX11N, CX11NF,
CX11NFC ............................................ 13 FS-1016 MFP/ FS-1116MFP .............. 15

Epson AcuLaser 2600, AcuLaser C1000, KM-C2520/ KM-C3225/ KM-C3232... 15

AcuLaser C1100, AcuLaser C1900,
AcuLaser C2000, AcuLaser C2600,
AcuLaser C3000, AcuLaser C4000,

Page | 3
Printing a Configuration Page
H
Configuration Report and then press OK

HP Multi Function & All-in-one

Color LaserJet HP Multi Function & All-in-one
NB: the content of the configuration pages varies depending LaserJet
on the options which are currently installed on the MFP.

HP LaserJet 3030
HP Color LaserJet 4730mfp
1. Press Menu/Enter
1. Press Menu to enter the Menus 2. Use the < or the > button to select Reports
2. Touch Information and then press Menu/Enter
3. Touch Print Configuration 3. Use the < or the > button to select Config
4. The message ‘Printing….Configuration’ Report and then press Menu/Enter
appears on the display until the MFP finishes 4. The product exits the Menu settings and
printing the configuration page. The MFP prints the report.
returns to Ready state after printing.

HP LaserJet 3015
HP Color LaserJet
1. Press Menu/Enter
8500/8550mfp 2. Use the < or the > button to select Reports
1. Press Menu until Information Menu appears and then press Menu/Enter
on the printer control panel display 3. Use the < or the > button to select Config
2. Press Item until Print Config Page appears on Report and then press Menu/Enter
the display 4. The product exits the Menu settings and
3. Press Select to print the configuration page. prints the report.

HP Color LaserJet 9500mfp HP LaserJet 3050 AiO

1. Press Menu to enter the Menus 1. On the all-in-one control panel, press Menu
2. Touch Information 2. Use the < or the > button to select Reports,
3. Touch Print Configuration and then press 
3. Use the < or the > button to select Config
Reports, and then press 
HP Color LaserJet 4. A second page also prints. On that page, the
Fax settings section provides details about the
2820/2830/2840 AiO fax settings.
1. On the control panel menu, press Menu
2. Use the < or the > button to select Reports
and then press Enter HP LaserJet 3052/3055 AiO
3. Use the < or the > button to select Config
1. On the all-in-one control panel, press Menu
Report and then press Enter
2. Use the < or the > button to select Reports,
and then press 
3. Use the < or the > button to select Config
HP Color LaserJet Reports, and then press 
CM1015mfp/CM1017mfp 4. A second page also prints. On that page, the
Fax settings section provides details about the
1. On the control panel menu, press Menu
fax settings.
2. Press the navigation arrows to select
Reports and then press OK
3. Press the navigation arrows to select

Page | 4
Printing a Configuration Page
H
HP LaserJet 3020
1. Press Menu/Enter
2. Use the < or the > button to select Reports HP LaserJet 8100/8150mfp
and then press Menu/Enter
1. Make sure the printer is on and the Ready
3. Use the < or the > button to select Config
message is displayed
Report and then press Menu/Enter
2. Press Menu until the display reads
4. The product exits the Menu settings and
Information Menu
prints the report.
3. Press Item until the display reads Print
Configuration
4. Press Select to print the configuration page.
HP LaserJet 3380 NB: An HP Jet Direct network configuration page
1. Press Menu/Enter will also print for printers with network cards
2. Use the < or the > button to select Reports, installed.
and then press Menu/Enter
3. Use the < or the > button to select Config
Reports, and then press Menu/Enter HP LaserJet 9040mfp/9050mfp
4. The product exits the Menu settings and
1. Touch Menu
prints the report.
2. Touch Information
3. Touch Configuration Page
NB: If an HP Jet Direct print server is installed,
HP LaserJet 3390/3392 AiO an HP Jet Direct configuration page also prints.
1. On the all-in-one control panel, press Menu
2. Use the < or the > button to select Reports,
and then press  HP LaserJet 9055/9065mfp
3. Use the < or the > button to select Config
1. Press the Mode Selection key twice
Reports, and then press 
2. Touch Information
4. A second page also prints. On that page, the
3. Touch Configuration Page
Fax settings section provides details about the
4. Press Start
fax settings.

HP LaserJet M1005 mfp

HP LaserJet 4100 mfp
1. On the device control panel press
1. On the all-in-one control panel, press Menu
Menu/Enter
2. Use the < or the > button to select
2. Use the < or the > button to select Reports
Information and then press 
and then press Menu/Enter
3. Use the < or the > button to select Print
3. Use the < or the > button to select Config
Configuration and then press 
Report, and then press Menu/Enter

HP LaserJet 4345mfp HP LaserJet M3027 and M3035

1. Touch Menu mfp
2. Touch Information
3. Scroll to the Configuration Page & the page 1. From the Home screen, touch
will automatically print. Administration
2. Touch Information
3. Touch Configuration/Status Pages.
4. Touch Configuration Page
5. Touch Print.

Page | 5
Printing a Configuration Page
H
HP Color LaserJet 2605
HP LaserJet M5025 and 1. On the control panel menu, press
M5035mfp 2. Use the < Left Arrow or the Right Arrow >
button to select the Reports menu, and then
1. From the Home screen, touch
press 
Administration
3. Use the < Left Arrow or the Right Arrow >
2. Touch Information
button to select Config Report, and then press
3. Touch Configuration/Status Pages
.
4. Touch Configuration Page
5. Touch Print
NB: If the device contains a HP Jet Direct print
server or an optional hard disk drive, additional HP Color LaserJet 2700/2700n
pages print that provide information about 1. Press OK
these devices. 2. Press > to highlight Reports, and then press
OK
3. Press > to highlight Config Report, and then
HP Color LaserJet press OK

HP Color LaserJet 1500

HP Color LaserJet
1. Press the Go button and the Cancel Job
button simultaneously. 3800/3600/3000
NB: the supplies status page also prints. 1. Press Menu
2. Press  to highlight Information, and then
press 
HP Color LaserJet 1600 3. Press to highlight Print Configuration, and
then press 
1. Press the < Left Arrow or the Right Arrow > to
select the Reports menu
2. Press 
3. Press the < Left Arrow or the Right Arrow > to HP Color LaserJet 4700/ CP4005
select Config Report 1. Press Menu to enter the Menus
4. Press  to print the Configuration Page. 2. Press  to highlight Information
3. Press  to select Information
4. Press to highlight Print Configuration
HP Color LaserJet 2500 /2550 5. Press  to select Print Configuration
1. Press the Go button and the Cancel Job
button simultaneously.
NB: if an HP Jet Direct print server card is HP Color LaserJet 5500/5550
installed, an HP Jet Direct page also prints. 1. Press  (HP CLJ5500 models) or Menu (HP
CLJ5550) to open Menus
2. Press  to highlight Information.
HP Color LaserJet 2600n 3. Press  to select Information
4. Press  to highlight Print Configuration
1. Press the < Left Arrow or the Right Arrow > to
5. Press  to select Print Configuration
select the Reports menu
2. Press 
3. Press the < Left Arrow or the Right Arrow
> to select Config Report
4. Press  to print the Configuration Page.

Page | 6
Printing a Configuration Page
H
3. Press  to highlight Print Configuration then
press 

HP Color LaserJet 9500

1. Press  (select) to open the menus HP LaserJet 5100
2. Use  or  buttons to scroll to Information
1. Press Menu until the Information Menu
Menu then press  (Select)
appears
3. Use  or  buttons to scroll to Print
2. Press Item until Print Configuration appears
Configuration then press  (Select). The HP
3. Press Select to print the configuration page.
Jet Direct network configuration page also prints
4. Press Pause/Resume to close all menus. As a
short cut you can also: Press 2 and then press 2
again on the printer control panel. HP LaserJet 5000/5200
1. Press Menu
2. Press  or  to scroll to Information and
Mono LaserJet press 
3. Press  or  to scroll to Print Configuration
and press 
HP LaserJet
1010/1012/1015/1018
1. Press and hold the Go button for 5 seconds HP LaserJet 8150
1. Press Menu repeatedly until Information
Menu appears
HP LaserJet 1020 2. Press Item repeatedly until Print
1. Press and hold the Go button for between 5- Configuration appears.
10 seconds, until the Attention and Ready lights 3. Press Select to print the configuration page.
flash.

HP LaserJet 9000/ 9040/ 9050

HP LaserJet 1. Press 
1160/1320/1150/1300/1022 2. Use  or  to scroll to Information and press

1. Press and hold the Go button for 5 seconds 3. Use  or  to scroll to Print Configuration
and press 

HP LaserJet
2400/2410/2420/2430 HP LaserJet P2015
1. Press  (Select button) to open the menus 1. Press & hold the Go button for 5 seconds.
2. Press  or  to scroll to Information and
press 
3. Press  or  to scroll to Print
Configuration and press  (Select button). HP LaserJet P3005
1. Press Menu
2. Press to highlight Information and then
HP LaserJet press 
4350/4200/4300/4240/4250 3. Press  to highlight Print Configuration and
then press 
1. Press  or Menu to open Menus
2. Press  to highlight Information then press


Page | 7
Printing a Configuration Page
H
HP Legacy Products 2. Press the (Item) button until Print Self-Test
appears.
3. Press the (Select) button.
HP Multi Function & All-in-one The self test will print with a Menu Map
LaserJet
HP LaserJet 5Si
HP Color LaserJet
1. Press [Menus] until "Test Menu" appears
2. Press [Items] until "PCL Configuration Page"
HP Color LaserJet 5 Series appears
1. If the printer is online, select the (On Line) key 3. Press [Select *]
to take the printer offline (the On Line indicator
goes out).
2. Press the (Menu) key repeatedly until PCL HP LaserJet 8100
TEST MENU appears on the first line of the
1. Press Menu repeatedly until Information
printer's display panel.
Menu appears
3. PCL SELF TEST or PS SELF TEST should
2. Press Item repeatedly until Print
automatically appear on the second line.
Configuration appears.
4. Select the (ENTER) key to print the Self-Test
3. Press Select to print the configuration page.
page. 06 PRINTING PCL TEST appears briefly
and, after about 10 seconds, the page prints.
Press the (On Line) button to put the printer
back online (the On Line indicator goes on). HP Office Jets, Desk Jets, Design
"00 PCL READY" or "00 PS READY" appears in the Jets & Ink Jets
display window.

Business Inkjet 1000

HP LaserJet 9000mfp Turn on the printer. Press and hold down the
Power button. Press the Cancel button once.
1. Press 
Release the Power button and the configuration
2. Press  to highlight Information and then
press  page will print.
3. Press  to highlight Print Configuration and
then press 
Office Jet 9100 series
Turn on the all-in-one. Type the authentication
HP Color LaserJet LJ4600/ 4610/ PIN, if required. Press Menu button on the
4650 control panel. Press the + or – buttons to go to
the PRINT REPORT menu. Press Up or Down
1. Press  (HP CLJ4600 models) or Menu (HP buttons to reach the Device config. option. Press
CLJ 4610n & 4650) to open Menus Select button to print the Configuration page.
2. Press  to highlight Information
3. Press  to select Information
4. Press  to highlight Print Configuration Desk Jet 460
5. Press to select Print Configuration
Make sure the printer is on and loaded with
unused, plain, white paper. Hold down the
HP Mono LaserJet Power button, and then press the Resume
button ten times. Release both buttons, and the
HP LaserJet 5 Series diagnostic test page prints.
1. Press the printer's (Menu) button until Test
Menu appears.

Page | 8
Printing a Configuration Page
H
Desk Jet 1100c Xerox Color Multifunction
1. Press the Power button to turn the printer
off, and then turn it on again. Phaser™ 6110MFP
2. Press the Resume button and release it when
1. Press the [Menu] button on the Control Panel
it starts to blink.
until 'Network' is displayed on the bottom line
Printing A Diagnostic Test Page The information
of the Display Screen, and then press the [Enter]
on the diagnostic test page is useful when
button.
troubleshooting printer issues.
2. Press the [Left] or [Right] arrow button until
1. Press the Power button to turn on the printer.
'Network Info' is displayed, and then press the
2. Press and hold the Power button, press the
[Enter] button.
Resume button four times, and then release the
3. Press the [Enter] button when 'Yes' is
Power button.
displayed. The Network Configuration Page will
Printing Continuous Diagnostic Test Pages:
be printed.
1. Turn the printer on.
2. Press and hold the Power button, press the
Resume button five times, and then release the
Power button. Phaser™ 8560MFP
3. To stop printing the continuous diagnostic 1. Press the [System] button on the Control
test pages, turn off the printer. Panel. The System Setup menu will be displayed.
PRINTING A CLEAN TEST PAGE The patterns and 2. Press the [Down] arrow button on the Control
colors on the clean test page are useful when Panel to select [Configuration Page].
troubleshooting ink cartridge issues. 3. Press the [OK] button on the Control Panel to
1. Turn the printer on. print.
2. Press and hold the Power button, press the
Resume button seven times, and then release
the Power button.
NOTE: The three colored horizontal lines (cyan,
magenta, and yellow) near the top of the page
Xerox Color Advanced
should be the same color as the three colored Multifunction
dots or squares on the color ink cartridge
(51641A).
WorkCentre™ 7228/7235/7245
1. Press the [Machine Status] button on the
HP DeskJet 1120C Series Control Panel. This is the button to the right of
the
1. Power on your printer. Touch Screen labeled with a machine icon. The
2. Press and hold down the Power button and Machine Status screen will be displayed.
press the Resume button four times. 2. Select the [Billing Meter / Print Report] tab on
3. Release the Power button. Your printer will the Touch Screen.
print a diagnostic page. 3. Select the [Print Report / List] button.
4. Select the [Copy Mode Settings], [Print Mode
Setting] or the [Scan Mode Settings] button.
HP Design Jet 700 Series 5. Select the [Settings List - Common Items]
button.
755CM (maybe others as well):
6. Press the [Start] button on the Control Panel.
1. Press Enter
2. Press Up-Arrow until "Service Programs" is The System Settings List will print.
displayed
3. Press Enter
4. Press Up-Arrow until "Service-Config." is
displayed
5. Press Enter - will take a long time and print
about 1 m of paper…

Page | 9
Printing a Configuration Page
H
WorkCentre™ 7655/7665 3. Select the [Tools Pathway] button. The Tools
Mode Screen 1 of 3 will be displayed.
1. Press the [Machine Status] button on the 4. Select the [System Settings]. The System
Control Panel. The Machine Status screen will be Settings screen will be displayed.
displayed. 5. Select the [Configuration Report]. The
2. If necessary, select the [Machine Information] Configuration Report screen will be displayed.
tab on the Touch Screen, and then select the 6. Select the [Print Configuration Report Now]
[Print Reports] button. button. The report will print.
3. Select the [Configuration Report] option, and 7. Select the [Save] button.
then select the [Print Selected Report] button. 8. Select the [Exit Tools] button.
A message will confirm that the report is being
printed.
4. Select the [Close] button.
WorkCentre™ 4150
1. Press the [Machine Status] button, located on
Xerox: Black and White the left side of the Control Panel. A new screen
will be displayed with tabs. By default, the
Multifunction contents for the Machine Information tab will
be displayed.
WorkCentre™ 232/238 2. Select [Print Reports]. The Print Reports
screen will be displayed.
1. Press the [Machine Status] button on the 3. Select [System Configuration], and then select
Control Panel. The Machine Status screen will be [Print Reports]. The Machine Configuration
displayed. Report will print.
2. Select the [Print Reports] button on the Touch 4. Select [Close] to return to the main default
Screen. screen.
3. Select the [Print System Configuration Report]
button.
4. The report will print. Select the [Close] button
to return to the default screen.
Xerox Advanced Multifunction

WorkCentre™ 7228/7235/7245
WorkCentre™ 245/255/265/275 1. Press the [Machine Status] button on the
1. Press the [Access] or [Access A] button on the Control Panel. This is the button to the right of
Control Panel. The Login screen will be the
displayed. Touch Screen labeled with a machine icon. The
NOTE: If the Auditron is enabled, select the Machine Status screen will be displayed.
[Copy] button first on the Touch Screen, and 2. Select the [Billing Meter / Print Report] tab on
then press the [Access] or [Access A] button the Touch Screen.
2. Enter your password using the numeric 3. Select the [Print Report / List] button.
keypad on the Control Panel, and then select 4. Select the [Copy Mode Settings], [Print Mode
[Enter] on the Touch Screen. The Pathway Setting] or the [Scan Mode Settings] button.
Options screen will be displayed. 5. Select the [Settings List - Common Items]
NOTE: The default password is 1111. The button.
password will be displayed as an asterisk (*). 6. Press the [Start] button on the Control Panel.
If you make a mistake, press the [Clear (C)] The System Settings List will print.
button on the Control Panel and re-enter the
password. To cancel the operation, press the
[Cancel] button. If you are experiencing WorkCentre™ 7655/7665
problems with your password or have forgotten
1. Press the [Machine Status] button on the
your password, contact your System
Control Panel. The Machine Status screen will be
Administrator.
displayed.

Page | 10
Printing a Configuration Page
H
2. If necessary, select the [Machine Information] Xerox Color Printers
tab on the Touch Screen, and then select the
[Print Reports] button.
3. Select the [Configuration Report] option, and Phaser™ 8500/8550
then select the [Print Selected Report] button. 1. Press the [Up] or [Down] arrow button on the
A message will confirm that the report is being Control Panel to select [Printer Setup] on the
printed. Display Screen, and then press the [OK] button.
4. Select the [Close] button. 2. Press the [Up] or [Down] arrow button to
select [Configuration Page], and then press the
[OK] button to print.
WorkCentre™ Pro 3. Press the [Up] or [Down] arrow button to
select [Exit], and then press the [OK] button to
232/238/245/255/265/275
return to the Main Menu.
1. Press the [Machine Status] button on the
Control Panel. The Machine Status screen will be
displayed. Phaser™ 6300/6350
2. Select the [Print Reports] button on the Touch
Screen. 1. Press the [Up] or [Down] arrow button on the
3. Select the [Print System Configuration Report] Control Panel to select [Information] on the
button. The report will print. Display Screen, and then press the [OK] button.
4. Select the [Close] button to return to the 2. Press the [Up] or [Down] arrow button to
default screen. select [Information Pages], and then press the
[OK] button.
3. Press the [Up] or [Down] arrow button to
select [Configuration Page] or [Supplies Usage
WorkCentre™ 4150
Page], and then press the [OK] button to print.
1. Press the [Machine Status] button, located on
the left side of the Control Panel. A new screen
will be displayed with tabs. By default, the Phaser™ 540/550/560/740/
contents for the Machine Information tab will
be displayed.
2. Select [Print Reports]. The Print Reports 600/340/360/380
screen will be displayed. 1. While Ready is displayed, press Menu; the
3. Select [System Configuration], and then select printer displays the first item in the menu:
[Print Reports]. The Machine Configuration 2. Help Pages <---- ----> Menu
Report will print. 3. Press Menu to access the Help Pages; the
4. Select [Close] to return to the main default following message appears:
screen. 4. Menu Map <---- ----> Print
5. Press <---- or ----> until the following message
appears:
WorkCentre™ Pro 75/90 6. Configuration Page <--------> Print
7. Press Print.
1. Press the [Machine Status] button on the
Control Panel. The Machine Status button is the
bottom button of the three buttons on the
Control Panel.
2. Select [Print Reports] on the Touch Screen.
The Print Reports screen will be displayed.
3. Select [Print Configuration Report].
4. Select [Close].

Page | 11
Printing a Configuration Page
H
Xerox Black and White DocuPrint Nxx-Series, Nxx25-
Printers Series, and Phaser
1235/2135/5400
Phaser™ 3500 NB: The information below applies to the following printers:
DocuPrint N24, DocuPrint N32, DocuPrint N40, DocuPrint
1. Press the [Menu] button on the Control Panel. N2025, DocuPrint N2125, DocuPrint N2825, DocuPrint
Information will be highlighted on the Display N3225, DocuPrint N4025, DocuPrint N4525, Phaser 1235,
Screen. Phaser 2135, Phaser 5400
2. Press the [OK] button. 1. Press the Menu Up (1) or the Menu (5) key
3. Press the [Up] or [Down] arrow button to and scroll to Print Menu.
select [Info Pages], and then press the [OK] 2. Press the Item Up (2) or the Item Down (6)
button. Config Page will be displayed and key and scroll to Configuration Sheet (this is
highlighted. called Configuration Page on some printer
4. Press the [OK] button. The Configuration Page models).
will print. 3. Press the Enter (4) key to print the
5. Press the [Cancel] button to return to the Configuration Sheet.
Main screen.

Phaser™ 4500 Dell

From the Printer's Main Menu:
1. Select Information and press the OK button. Dell Laser Printer 5210n/ 5310n
2. Select Information Pages and press the OK 1. Make sure the printer is on.
button. 2. Press the Menu button on the operator panel.
3. Select the Configuration Page and press the 3. Press the Down arrow button until a right
OK button. arrow appears next to Reports, and then press
the Select button.
4. Press the Down arrow button until a right
DocuPrint Nxx-Series, Nxx25- arrow appears next to Network Setup Page or
Network <x> Setup Page, and then press the
Series, and Phaser Select button.
1235/2135/5400 The printer returns to Ready.
NB: The information below applies to the following printers:
DocuPrint N24, DocuPrint N32, DocuPrint N40, DocuPrint
N2025, DocuPrint N2125, DocuPrint N2825, DocuPrint
N3225, DocuPrint N4025, DocuPrint N4525, Phaser 1235,
Dell™ Color Laser Printer 5110cn
Phaser 2135, Phaser 5400 1. Press Menu.
1. Press the Menu Up (1) or the Menu (5) key 2. Press the down arrow until ‘Report/List’
and scroll to Print Menu. appears, and then press the right arrow or 
3. ‘Printer Setting’ is displayed, and then press 
2. Press the Item Up (2) or the Item Down (6)
The Printer Settings page is printed.
key and scroll to Configuration Sheet (this is
called Configuration Page on some printer
models).
3. Press the Enter (4) key to print the Dell™ Workgroup Laser Printer
Configuration Sheet. W5300n/ Dell™ Workgroup
Laser Printer M5200n
1. Make sure the printer is on and the Ready
message appears.
2. Press and release [Menu] until you see
‘Utilities Menu’, and then press [Select].

Page | 12
Printing a Configuration Page
H
3. Press and release [Menu] until you see ‘Print Lexmark 4600 MFP
Menus’, and then press [Select].
1. Select Reports
2. Select Menu Settings Page.
Dell Workgroup Laser Printer
S2500/S2500N Lexmark E450dn
1. Turn the printer off. 1. Make sure the printer is on and at the Ready
2. Open the upper front door. state.
3. Press and hold [Continue] as you turn the 2. Press the Menu ( ) button on the printer
printer on. operator panel.
4. All the lights cycle. 3. Press the down arrow button ( ) until the
5. Release [Continue]. check mark on the left is in front of Reports.
6. Close the upper front door. 4. Press the select ( ) button once. A new list of
7. The light sequence that represents the Home menu choices will appear.
menu is displayed. 5. Press until the check mark is in front of Menu
8. Press and release [Continue] until all the Settings Page or Network
lights cycle. Setup Page..
9. A Printer Settings Configuration sheet prints. 6. Press once more. The printer should display
NOTE: The sheet only prints when the Home Printing Menu Settings Page and the
menu is displayed. menu settings page(s) will print out. NOTE: The
printer will return to the Ready state after
the menu settings page prints.
Dell™ 1600n (Multifunction
Laser)
1. Press the [MENU] button until ‘Network
Setup’ appears. Epson
2. Press the arrow button until ‘Print Sys.
Data’ appears, and press the [SELECT] button. Multi Function & Laser Printers
On the bottom line of the display, ‘Yes’ appears.
3. Press the [SELECT] button.
The Network Configuration Page prints out. Epson AcuLaser C3800n
1. Press the Enter button 3 times.
2. The printer prints out a status sheet.

Lexmark
Epson AcuLaser CX11N, CX11NF,
Lexmark C500n CX11NFC
1. Press to take the printer offline. Verify that 1. Press the setup button to enter the Setup
the green light is off and that Test Menu mode. The setup light is lit and Setup Menu
is displayed on the LCD. appears on the LCD panel
2. Press to enter the Test Menu. 2. Select Printer Settings is selected and then
3. Press until Network Config Page is displayed press the button displaying the right arrow.
on the LCD. 3. Select Information Menu is selected and then
4. Press to print the network config page. Press press the button displaying the right arrow.
to return the printer to a Ready 4. Select Status Sheet then press the button
state. displaying the right arrow.
Confirm that the light is green and that the LCD 5. The data light blinks and the page prints
is displaying Ready.

Page | 13
Printing a Configuration Page
H
Epson AcuLaser 2600, AcuLaser 5. When the Network Status is turned on the
Network Interface Status Page will print after
C1000, AcuLaser C1100, the
AcuLaser C1900, AcuLaser Print Status page.
C2000, AcuLaser C2600,
AcuLaser C3000, AcuLaser FS-6950DN/ FS-800/ FS-7000
C4000, AcuLaser C4100, 1. Ensure printer status is displaying Ready.
AcuLaser C4200, AcuLaser 2. Press the Status key, the status page will then
print.
C8500, AcuLaser C8600,
AcuLaser C900, AcuLaser C9100,
AcuLaser CX11N, AcuLaser FS-1018 MFP
CX11NF, COLOR Copy Station
8200, COLOR Copy Station 8500,
COLOR Copy Station 8600, EPL-
5800, EPL-5900, EPL-6100, EPL-
6200, EPL-C8200, EPL-N2050+,
EPL-N2750, EPL-N3000, EPL-
N4000, EPL-N4000+, EPL-N7000
1. Press the Enter button on the printers control
panel once to enter the SelectType mode. The
LCD panel displays Information Menu
2. Press Enter button
3. Press the Down button until Network Status
Sheet appears on the LCD panel
4. Press Enter to print the Network Settings
Sheet

Kyocera

FS-9130DN/ FS-9120DN / FS-

9520DN/ FS-C8026N/ FS-
C8008N/ FS-C8008DN/FS-
C5015N/ FS-C5025N/ FS-
C5030N/
1. Press [Menu]
2. Press the Up and Down arrow repeatedly
until Print Status Page appears
3. Press [OK]. A blinking ‘?’ will appear KM 1820/ FS-1118MFP
4. Press [OK] again, the message processing 1. Access Service Setting
appears, the printer will then print the status 2. Press up or down arrow to select either
page Ser.Status Page or NW Status Page and press

Page | 14
Printing a Configuration Page
H
[Enter]. Print Are you Sure? Is displayed
3. Press left Select
4. Accepted is displayed and printing of the
report will begin. The display returns to the
Service Setting screen.

FS-1016 MFP/ FS-1116MFP

1. Access 3. Report
2. Press Right or Left arrow to select
Configuration or Menu Map and press [OK]
3. Printing will begin. The display will then
return to the ready screen.

KM-C2520/ KM-C3225/ KM-

C3232
1. Press the Printer Key
2. Press [Printer Menu]
3. Press [Print Status Page]
4. Press [Printing], processing is displayed and
the page is printers, printer then returns to
Printer mode.

References

www.hp.com

www.xerox.com

www.lexmark.com

www.epson.com

www.ricoh.com

www.kyocera.com

Page | 15