Boxer Manual CONTENTS

Punch boxing arcade machine

I．Specification and Parameter .........................................................................................4

II．Accessories ................................................................................................................... 4

III．Attentions ....................................................................................................................4

IV．Handling and Assembly .............................................................................................. 4

V．Playing Way .................................................................................................................. 5

VI．Maintenance ............................................................................................................... 6

VII. Fault & Resolution ....................................................................................................... 7

VIII. Function Setting ..........................................................................................................7

IX. Function Setting Table ................................................................ 错误！未定义书签。

X．Main Board Input & Output Table: ........................................... 错误！未定义书签。

 5.Before moving, you must turn off the power supply and unplug the power cord.
I．Specification and Parameter: 6.If the foot wheel cannot move when moving, please confirm whether the
underside is flat.
7.Random human movement, flip, transportation, etc, can damage the equipment
Dimension：W700xD1170xH2200mm
and destroy the machine performance.
Weight： 280kg
8. Be sure to meet the manufacturer's requirements in the process of moving,
Power：220v 50Hz/60Hz
turning and transporting.
Voltage：380W
Players：singel/multi players

IV．Handling and Assembly

II．Accessories:
Before shipping,packing to avoid collision and scratches during transit.
The machine would be packaged with bubble pack +well paper +stretch film+ wooden
Name of accessory Quantity Remarks
frame as below:
key 1piece
wire 1 piece
Instruction 1 book

III．Attentions：

1. This machine is only suitable for indoor environment.

2 .The machine should not be placed in a tilted position. It is easy to cause an
accident when placed in a tilted position.
3. The machine should not be used in the following places：
 In a dusty environment;
 Where the room temperature is too high or the air is not circulating;
 A condensate where the machine produces condensation or humidity;
 Where the voltage is unstable or the voltage is too low; 2. transport

 Where the vibration is serious; Machine should be transported in vertical position

4.The machine must be assembled and fixed in accordance with the assembly After machine is taken out of the packing, it should be transported in horizontal position with

instructions before normal operation. the help of two wheels.

3. Installlation 3. Check the display
After machine is taken out of packing, should be placed in vertical position and the base should 4. Check coin selector
be leveled. Maintenance of mechanism and spring
If the machine placed outdoor must be connected to grounded. One month or more often, or if the lowering speed of punching bag, all moving element
Make sure there is enough clearance on the sides and in front of the machine, so the player should be rubbed with grease
will not hit any objects after punching the bag. If punching bag lowers slowly or too fast one should check if spring is properly
stretched. Spring can be adjusted with screw.
V．Playing Way Maintenance of puching bag
If punching bag is vibrating too much or if it is rotating around
1. Insert coins, select a game mode to start game. its own axis, screw should be tightened
2. Players hit the punch bag released from the upper position, score would be displayed To replace inner bladder of the punch bag one should untie rope, take out old insert
on the front panel. and replace it with a new rubber bladder. A special attention must be paid to the
3. When game over, win the lottery or gashapon according to the score. location of the bladder valve. The valve must be placed in the opening of the cover.
*It is recommended to use warm up punches before the maximum strength punch, for the Position of arm protector
first time user, please practice with several easy test punches before your maximum punch. DO NOT PLAY THE GAME WITHOUT PROPERLY PLACED ARM PROTECTOR.
*Select type of game: default setting is power mode, press SELECT GAME button can The position of the arm protector should be like on the picture below:
choose between following types of game: power—speed,
reflex—2players—3players—4players—5players—6players—power…
*multi player tournament mold is under power play way.
*Before press the START button, player must stand in front of the boxer, wait the punching
bag released, make a fist and punch must be placed in the center of punching bag.

VI. Maintenance
EVERY TWO WEEKS
1. Check the air pressure of the bag The following two pictures illustrate an improper setup of the punching bag.NEVER
2. Check if the bag is not rotating about its own axis. leave the machine in this state. Both of these cases may result in injury to the user.
3. Check if the arm protector is loose
4. Check all the connections on the main board
5. Check the level/balance of the machine
6. Check the safety distance
EVERY MONTH
1. Check if the screw loss
2. Check the machnism
VII. Fault & Resolution VIII．Function Setting:

NO Fault Resolution 1. Press the SERVICE button on the mainboard for 5 seconds, enter into
1 Main board not Check fuses, function setting.
functioning Check the connection between power supply and the main 2. Press the SERVICE key to increment the selection to set the project number.
board Press the TEST key to change the value of the project function parameter (range
2 Mechanism is Using manual button check if it is possible to lower value).
not functioning punching bag; Check for burned fuse; Check button 3. P01-Pr. Set the project loop increment key, as the function setting table.
functionality; Check power supply; Check strip connecting 1) P0，set the coins per game
the main board with the power supply 2) P1，set the game time
3 Sensor is not Wave the punching bag, see if the color of sensor sign light 3) P6，set the gashapons
functioning change or not, check the connection of sensor 4) P10，set the comfort ticket
4 Halogen lights Check power supply cable connection. 5) Pr，press the test button to exit
are not Notes：The above two digital tubes display "set the serial number PX", the intermediate
functioning digital tube displays "setting parameters".
5 Button START or Check for main board cable connection 4. Main board dial switch. The first of W1 is to choose the game version.
GAME is not Check switch/button cable connection
functioning
6 Sound is not Check if it is not at low volume or mute; Check if cable is
working correctly connected to the main board; Check if cable to
speaker is correctly connected （Gashapon version） （lottery version）

No score display &START, SELECT button not functioning

If the punching bag already at the horizontal place, open the door at back of machine,
press the manual button release the punching bag, restart the game.
If the punching bag stop at the vertical place, punching the bag again, till the punching
bag back to horizontal place.

RED MANUAL BUTTON

 Pr Press the RST2 button,save MCU,and
IX. Function Setting Table: exit the function setting

Project Function Description Range Value Factory Default

X. Main Board Input & Output Table:
P0 Coin of each game 01-10 1
P1 Time of each game, game over when 10-300 60
time finish INPUT PART
P2 Power mode ticket 0-10 1 INPUT CONTENT INPUT CONTENT
quantity=scores/Range value 0-100 I1 coin selector I8
P3 100-300 0-20 2 I2 button selector I9
P4 300-500 0-30 5 I3 Punch bag button I10
P5 500-700 0-40 10 I4 Speed sensor#1 I11
P6 700-900 0-50 15 I5 Lottery/gashapon/cola I12
P7 900 Bonus 0-100 50 I6 Reset/coin counter button I13
P8 Speed mode: 0-10.0 0-10 1 I7 I14
P9 10.0-30.0 0-20 2
P10 30.0-50.0 0-30 5 OUT PART
P11 50.0-70.0 0-40 10 OUTPUT CONTENT OUTPUT CONTENT
P12 70.0-90.0 0-50 15 OUT 1 Coin counter OUT 15
P13 Reflex mode: 0-0.5 0-50 5 OUT 2 Ticket/gashapon counter OUT 16
P14 0.5-1.0 0-30 2 OUT 3 Light of select button OUT 17 electric magnet
P15 1.0-1.5 0-20 1 OUT 4 Light of punch bag button OUT 18 Two lights
P16 1.5-2.0 0-10 1 OUT 5 Ticket/gashapon /cola driver OUT 19
P17 Difficulty level:1low 2middle 3high 0-3 1 OUT 6 Light of 100 scores & figure OUT 20
P18 Maximum power 800-999 900 OUT 7 Light of 300 scores & figure OUT 21
P19 *coin /1 ticket or gashapon 0-50 0 OUT 8 Light of 500 scores & figure OUT 22
Reward set: 1 ticket, 1-4 1 OUT 9 Light of 700 scores & figure OUT 23
P20 2Gashapon,3cola, 4 no gift OUT 10 Light of 900 scores & figure OUT 24
*coin/cent, 100cents the record add 0-999 100 OUT 11 Light of panel-power/player 2 OUT 25
P21 1 OUT 12 Light of panel-speed/player 2 OUT 26
Factory default. Set to 1, when r step 00-01 0 OUT 13 Light of panel-reflex/player 3 OUT 27
P22 exit, restore the factory values OUT 14