The Product Introduction

● 16 Groups Alarm Monitor

● 16 Groups Analog Itinerantly Supervising Instrument

● Diesel Engine Alarm Control System

● Rudder Angle Indicator

● Main Engine 、Generator Tachometer

● Boiler Controller

● Level Indicator

● Navigation Light Controller

● Magnetic Compass Autopilot

● Marine Instrument

Guangzhou Sinocon Automation Institute

ADD:Floor 2,NO.6 Guanyu Road,Tangdong,ZhongshanAvenue,Tianhe District,Guangzhou City,China

TEL：0086-20-85578161 83692151 FAX：0086-20-85548180
ZIP CODE：510665 Email：[email protected]
 Type Product profile
1、HYPO—D2210、P1200microcontroller The alarm controller uses the advanced
Facade SCM, monitoring the working status of
switch alarm point 16 groups (D2100) or 12
groups (P1200) with an exquisite design,
reliable performance and convenient
installment. It can be applied to ship diesel
engines, cabins, steering engines, generator
and fire alarms. For medium and
small-sized ships we adopt a host and 1-3
appurtenant machines to display in
long-distance, for example to display engine
alarm in drive room, chief engineer room. It
only needs 4 lines to connect host and
Back appurtenant machine(2 power supply wires,
1 receive line and dispatch wires ).The
display status and function of the two
machines are completely the same.
Main Features and Functions：
1. The alarm points may be often-on or
often-off touch point.
2. The indicating light flashes when alarm is
on and rests when it’s off. Then it and the
indicating light is off when the alarm signal
is removed.
3. Check and reset the horn automatically
with an outspreading alarm touch point.
Type HYPO-D2210 4. Exchange data with computer through the
External Dimension：144mm×144mm×35 Mm RS-485 COM.
Weight：0.6Kg 5. Alarm relay time can be set according to
Power Supply：DC 24V requirement. Type D2210 chooses it
Type HYPO-D3 between 0 and 4 seconds, Type P1200 0 and
99 seconds.
6. When the 1-8 points of model D2210
enunciator alarm，it accordingly outputs the
signal of DC24V and the current no bigger
than 30mA to control exterior equipments.
The model HYPO-P1200 alarm with model
CDZ9902 speed model guarantees the diesel
engine’s safety protection system with a
compact structure, well-performance.
Remarks：The overall dimensions and panel
collocation of two machines are the same
Dimension：144mm×144mm×31mm completely.

Guangzhou Sinocon Automation Institute 1

 Type Product profile
2、Cyd2 Rudder Angle Indicator CYD2 Rudder Angle Indicator’s power
supply may be AC220V or DC24V. It has
advantages of high accuracy（≤0.50）,
low noise, convenient installment and
adjustment, low price and strong load
ability etc.
The instrument is composed of a rudder
angle transmitter, a control box and an
2.1 Rudder Angle Transmitter indicator. The power switches, zero
Overall Dimension： position adjustment and full rudder
210mm×210 Mm×142 Mm adjustment are on the box.
Weight： 7kg It may be used to indicate rudder angles on
2.2 Controller ships with various sizes.
Overall Dimension：98mm×52 Mm×149 Mm Remarks：
Weight：0.7kg 1. One transmitter can connect five
2.3 Indicator indicators.
2.3.1 Cdf120 (Inbuilt Style、Antispray) 2. Circular three-faced indicator is under
Overall Dimension：120mm×120 Mm×164 development.
Mm
Weight：2.4kg
2.3.2 Cdf144 (Inbuilt Style、Antispray)
Overall Dimension：
144mm×144 Mm×86mm
Weight：0.5kg
2.3.3 Cdf225 (Wall-hanging style 、
Water-Proof)
Overall Dimension：225mm×260 Mm×12 Mm
Weight：10kg

Guangzhou Sinocon Automation Institute 2

 Type Product Profile
3. CDZ9903 Tachometer The tachometer adopts non-contacting
sensor with the measurement precision of
1% ， biggest measurement frequency
6KHZ, power supply DC24V.The
tachometer has two types: model
CDF9903 A is used to measure
unidirectional rotational speed, while
model CDF9903 B is used to measure
bi-directional rotational speed. The
tachometer is composed of sensors,
determination device of rotational
speed ,non-contacting pickup (proximity
switch ,hall switch), indicator(one or
more )and gear of velocity measurement
3.1 Display (measure rotational speed of trailing
3.1.1 CDF9903 A(Inbuilt Style、Antis pray) axle).It is mainly used in main engines on
Overall Dimension：96mm×96 Mm×86Mm ships, generators, electronic motors to
Weight：0.5Kg measure rotational speed. CDZ9903
tachometer is also used with this
3.1.2 CDF9903B (Inbuilt Style、Antis pray) equipment as rotational speed relay.
Overall Dimension：144mm×144 Mm×86Mm CDZ9903Amodel outputs 4 rotational
Weight：0.5Kg speed control signal at most。CDZ9903B
model outputs 4 rotational speed control
signal at most passive electronic contact.
Rotational speed can be set artificially.
Note: Customer ought to tell diameter of
trailing axle when choose gear of velocity
measuring of trailing axle.
Measurement speed gear is hoops of two
semi-structures, when installation,
disassemble and tight it on the trailing axle
with a bolt.

Guangzhou Sinocon Automation Institute 3

 Type Product profile
4.CDJ9905 Single Wire Transferred 16 This alarm apparatus uses the code
Groups Alarm principle in transmitting and receiving
signals, only requiring two transmission
wires to transmit the on or off signal of 16
groups, It can demonstrate the light and
reset to buzz alarm automatically.
Its transmitting distance is more than
1000 meters, sending implement install in
the cabin, but the receiver in the wheel
house.
It can be applied in the ship cabin,
4.1 Sending Implement
steering engine, generator alarm, control
Overall Dimension：
in distance and fire alarm. It is reliable,
120mm×60mm×190mm
convenient, and cable saving.
Weight：0.6Kg
4.1 Receiver
Overall Dimension：
160mm×80mm×165mm
Weight：0.6Kg

5.ADH5 LED Masthead Light The light uses LED with ultra brightness
and a working life of up to
50000~100000 hours. It saves energy,
adapts to a wide scope of application of
voltage resists vibration, enjoying high
brightness and colorful.
Type ADF-1 distributes with CXH5-1.
There are three working voltage: 24v,
110v, and 220v, mainly for the ferries.
Type ADF-2 distributes with CXH5-2.
There are three working voltages: 24v,
110v, 220v, mainly for middle and small
ships.

Guangzhou Sinocon Automation Institute 4

 Type Product profile
6.9902 Boiler Flame Detector The detector is composed of light
sensitive cell detector and flame amplifier
with advantages of high sensitivity, easy
adjustment, reliable performance.
The flame amplifier voltage can be setup
from 20mV to 400mV, which can satisfy
most boilers.

7. D139—72G Magnify PCB The circuit board and circuit board of

Relay PCB Protection PCB Type D139—72 German Anne fixes
steering control system are the same.
Magnify PCB, Relay PCB and the
protection PCB, performance, dimension
and interface function are the same as
D139—72 completely, it can be fungible
with each other.
Now it has already successfully equipped
on DaQing212 DaQing213 DaQing214
D139—72G Magnify PCB DaQing215 DaQing216 DaQing412
DaQing413 DaQing414 DaQing415
DaQing416 DaQing417 Xianghai ship,
Xiachi ship. It is good in performance for
many yeas.

Relay PCB Protection PCB

Guangzhou Sinocon Automation Institute 5

 Type Product profile
8. Navigation Light Control PCB The control PCB adopts advanced
technique with all electronic components
packed on a piece of circuit board
controlling 16 groups light(signal light).It
is low consume power（24V、0.8W,220V、
0.2W） and wide rang of indicator light
voltage （6.3V—24V）. The brightness of
indicator light can be adjusted with one
adjusting light device.
16 Groups Navigation Light Control PCB In addition，it has alarm function if light
silk breaks, automatically resets. The
PCB, fuse, button switch, indicator, and
buzzer make up the voyage light
controller and can constitute the function
good voyage light signal controller. It can
substitute old sails light controller.
Remarks ： 8 groups Navigation light
control PCB can control 8 groups
light(signal light) ,and its performance is
the same as 16 groups PCB.

8 Groups Navigation Light Control PCB

(132×129×25mm)

9、CDF9920（Flange）Level Indicator CDF9920 level indicator assembles

advanced key part of abroad, which is one
kind of dyadic liquid of static pressure
measure. It is composed of sensor,
transmitter, and indicator tripartite. (See
left picture). The adopted technology is
advanced with good quality, which is
used for boat and ship, chemical industry,
electric power, and running water
industry.
Technical Parameter：
Technical Feature： △ Rang of measuring：0—100M
The instrument adopts the intermediary agent △ Precision ：±0.2%FS or±0.5%FS
liquid ceramics sensor without mechanical △ Lagging ：Better than 0.1%FS
movement components and it gains the long △ Stability ：±0.15%
term stability, small temperature drift. When △ Operating temperature：-20-+70℃
the temperature changes from –20℃ to 80 △ Sensor material ： membrane 96%
℃ ,the effect is small. The ability of resisted alumina（ceramics sensor） input
Guangzhou Sinocon Automation Institute 6
 Type Product profile
compression is strong, may amount to several pattern 316L
times of measuring ring. △ Operating voltage：DC12—30V
Liquid level measurement system composed △ Output ：4—20MA
by The liquid level transmitter and digital △ Upper and limit alarm：it can be set.
display instrument.

10.CXM Single Loop Digital

Display This instrument adopts the advanced
Controller micro-computer technique, in which
There are various temperatures sensor
scale and curve datasheet. It can use on
several machines, apply in the input
signals, such as the thermocouple, hot
electric resistance and electric current and
electric voltage...etc. It is high precision,
reliable performance, complete functions.
The main characteristics and function are
as follows：
1. It can display measured value on four
figures digital tubes.
2. It can control function in up limit,
Dimension： upper limit, low limit and lower limit. The
80（H）×160（W）×120（D）Mm control value can be set in the rang of
Hole Dimension：76mm×152mm measurement.
3. A normal PID regulation 、 time
proportion control.
4. It can transmit and output analog signal
of 0-10 MA, 4-20 MA, 0-5 V, 1-5 V and
PID control output.
5. The input degree of cent number,
measuring rang, and decimal point
position are all set by key, and when
power supply breaks it cannot lose data. It
can communicate with various input/
output communication equipments
bi-directionally with the COM, making
up the net control system.
6. Each set adjusted parameters can be
locked by password, preventing false
operation.
Power supply：AC220V、DC24V.

Guangzhou Sinocon Automation Institute 7

11. HYPO—D2210 Diesel Engine Alarm Control System

HYPO—D2210 Display Panel

HYPO—D2210 Alarm Control Box

HYPO—D2210 diesel engine alarm control system fits on CUMMINS diesel engine and it is
suitable to equip the coastal transportation ship with double main engine, the passenger ship
and the Cargo vessel, it have 16 alarm point.
Alarm box is installed in engine room with D221016 groups alarm host 1 PCS, CDZ9903
rotational speed controller2 PCS (or 1PCS) and stop control panel 1PCS in the box. Display
panel is installed in wheel house. There are only 6 wires connected alarm box and display
panel.（2 signal wires, 2 power supply wires,2 emergency stop wires）.1—8groups alarm
points are used to alarm and stop（for example：high water temperature、low oil pressure, over
speed, emergency stop），9—16groups are used to alarm（for example：high water
temperature、low oil pressure, over speed, low oil pressure of gear wheel），the control
contents in 16 road groups can be set by customer.
Both alarm box and display panel can horn reset、answer and alarm to check. They
display conformably and work synchronously.

Dimension Of Alarm Control Box ：300mm×400mm×150mm

Power Supply Of Alarm Control Box：Dc24v ±15%

Guangzhou Sinocon Automation Institute 8

12. Cummins Diesel Engine Control System

Remote Control Board

Local Control Box

Cummins diesel engine control system is composed of a local control box and remote control
board. It fits on Cummins diesel engine.
Local control box is installed in engine room. On the panel are tachometer ,ejected air
thermometer, water thermometer, oil thermometer, oil manometer, voltage manometer,
calculating graph, and RUN, over speed (OS),Low Servo Pressure (LSP) ,water temperature
high (HWT) ,low oil pressure (LOP) ,emergency stop(ES) indicator light ,to indicate the engine operating
circumstance. In addition, power, RUN, emergency stop (ES), local/Remote switch button is assembled on
the panel. There are CDZ9903 speed relay & other relative relay is assembled in the box.
Remote control board is installed in wheel house. On the remote control board there are tachometer
ejected air ,water thermometer, oil thermometer, oil manometer, voltage manometer, calculate graph, and
RUN, over speed (OS),Low Servo Pressure (LSP),water temperature high (HWT), low oil pressure
(LOP),emergency stop(ES) indicator light to indicate the engine operating circumstance. In addition, power,
emergency stop (ES), Local/Remote switch button and Dimmer (light adjustment) is assembled on the
board.
Overall Dimension of Alarm Control Box: 400mmx500 Mm 200 Mm
Overall Dimension of Remote Control Board: 400mmx500 Mm 200 Mm
Guangzhou Sinocon Automation Institute 9
 Type Product profile
13.HYPO-M1200 Itinerantly Supervising And HYPO-M1200 itinerantly supervising
Alarm Instrument and alarm instrument（16groups analog）
is the most new generation of intelligent
digital itinerantly supervising instrument
presently. The instrument is designed and
manufactured according to characteristic
and requirement of ship instrument, which
adopted high-performance SCM as the
core, the square metal shell. It works
stably and reliably with the compact
structure, the complete function. It is
especially applied to display and alarm
the temperature of engine room
3
Dimension：144×144×55mm synthetically, liquid level of the pump
2
Hole Dimension：139×139 mm room in all kinds of ships. It also is
Weight：700g suitable to measure and demonstrate
Power Supply：DC24V temperature pressure & the current of
production process in chemical industry,
metallurgy, thermal power, light industry,
etc.
The Connects Line Diagram in the Back Main Features and functions：
1.It is high measurement accuracy，can
A01 B01 C01 V+ emendate the signal nonlinear inputted
A02 B02 C02 V- by thermocouple ,thermometer resistance
A03 B03 C03 and remote transmission resistance.
A04 B04 C04 HIGH 2.Upper limit：red light flash，L，ALM
A05 B05 C05 RELAY relay output。
A06 B06 C06 LOW Lower limit：yellow light flash，L，ALM
A07 B07 C07 RELAY relay output。
A08 B08 C08 SIREN 3. It can setup upper and lower limit alarm
A09 B09 C09 RELAY value independently in every passage.
A10 B10 C10
4. Every monitor loops can choose on or
off according to actual situation .when the
A11 B11 C11
RESET loop is off, it alarms to output and doesn’t
A12 B12 C12
display the measuring value.
A13 B13 C13 GND
5. When power is off, parameters can be
A14 B14 C14 B-485
preserved reliably for a long time.
A15 B15 C15 A-485
6. It have the switch function between
A16 B16 C16
itinerantly monitor and pointing monitor.
When monitor one point, it still monitor
the other points. If beyond up and low
limit, relevant point alarm.
7. It can communicate the epigenous
Guangzhou Sinocon Automation Institute 10
 Type Product profile
machine, and centrally monitor the locale
data and control the instrument.

8. It can set the parameters flexibly on the

panel, every parameter can lock with
each other and set up and low limit.
9. It can set the liquid density, and fill
various liquid, it will display the actual
deepness just to input the liquid density.
10.Input signal
Thermocouple: The B, S, E, K, T, J, R, N
resistance thermometer sensor：Pt100、
Cu50、Cu100
Standard signal：0-10mA、4-20mA、 DC
0-5V DC1-5V

14. CDF9928A Navigation Light Controller CDF9928A navigation light controller

use touch button key and inbuilt
structure. It can control 8 groups’
navigation lights (power not more than
80W) on or off directly. It can depart
into two types: A, B. depending on
power supply. The power supply of
model CDF9928A is DC24V. The
power supply of model CDF9928B is
AC220V.
Main Features：
1、Low consume power
Type A＜8W（All light shine on 8
Overall Dimension：144mm×144mm×60mm groups (24V60W)）
Hole Dimension：139mm×139mm Type B＜5W（All light shine on 8
Weight：0.8Kg groups (220V60W)）
Power Supply：1.AC220V,DC24V 2、It has lots of function, such as try a
2.DC24V light, eliminate a sound, adjust light,
can connect external alarm trumpet.
3、There are 16 fuses on the back.
4、Convenient installment. Customers
only need to connect into power
supply and sail light.

Guangzhou Sinocon Automation Institute 11

 Type Product profile

15 CDF9928B Navigation Light Controller CDF9928B controller can control 16

groups navigation light(signal light) ，
which combined with two part，Up 8
groups and down 8 groups work
independently. Customer can choose
actual power supply voltage depends on
actual situation.

Overall Dimension：160×282×64 Mm3

Hole Dimension：136×268mm2
Weight：1.5 Kg
Power Supply：1、AC220V、DC24V
2、DC24V

Guangzhou Sinocon Automation Institute 12

 Type Product profile
CDF9910 8 groups flashlight
16.CDF9910 8 Groups Flashlight Annunciator annuncicator control with SCM. adopt
LED flat panel indicator .Input signal can
be continued opening or continued
closure(jump line on inner part), it also
can be high level or low level. It apply
scope wide ,high in reliability, low price.
Main technical features：
Power supply: DC24v or AC 220v
Setup the indicator color: All lights are
red in 8groups.
History memory：It can take this function
Dimension：160×80×60mm3 if note in the order.
Weight：0.2 Kg

CDF2002 magnetic compass autopilot

17.CDF2002 Magnetic Compass Autopilot supplies autopilot for ship which hadn’t
assemble E- compass. It is cheap ,good in
performance ,easy to assemble. It is
suitable for medium and small-sized ship
and hooker.
Including ： 130 magnetic compass
（included sensor）1PC
Host 1 PC
Rundle angle transmitter 1 PC
Host Dimension: 310×170×60 Mm3 Tele-control box 1 PC
AC/DC24V Power supplies:1 PC
Main technical features：
（1） Magnetic compass
*precisions±1（few±2°）
（2） Keep direction accuracy
1-2class sea condition 1°
4-5class sea condition 2-3°
（3） output DC24V 1.2A(biggest)
（4）input power AC220V±15%
DC24V±20%
（5）operating temperature:-10-50
℃

Guangzhou Sinocon Automation Institute 13

 Type Product profile
18.CDF9916 Level 、 Temperature 、 The supervising and alarm units is
Pressure 、High Level Supervising & applied to the chemicals ship, oil ship
Alarm Units and other liquid cargo ship to monitor
level、high level and alarm.
We can provide the whole integer device,
also provide monotype. For example,
model CDF9916T（temperature）can be
used in oil pump, load pump, sweeping
cabin pump in the pump house to
supervise temperature and alarm.
The supervising &alarm unit is
composed of level, temperature 、
pressure、high level transmitter, safety
bar, 16 groups supervising instrument,16
groups annunciator and power supply,
switch, horn reset, test, lamp reset
button. It has 3 kinds of installation style
cabinet style, box style, board style,
Host Panel Dimension ：L×W×H assembled in wheel house control
480mm×440mm×110mm console usually.
Technical Specification:
※Main performance：
rang of supervising
level： 0-30m
temperature：-199℃~600℃
pressure：-0.01~5Mpa
high level：95%、98%
precision：1%
※operating temperature
main engine （ supervisor
annunicator, safety bar ,etc）-10℃-50℃
level transmitter：-20℃~80℃
temperature transmitter ： -199 ℃
~600℃
pressure transmitter：-20℃~70℃
high level transmitter：-30℃~80℃
+6
※power supply：AC220V -10 %、
DC24V±10%
※system consume power80W（12cargo
cabin，48points）
※substantial safe model
※protection model
Guangzhou Sinocon Automation Institute 14
 main engine：IP22
sensor：IP67
※explosion proof：ExiaⅡCT3-CT6
※ It has enact density function in
measuring liquid.
※ Demonstrated when fixed-point
examines, others examine as usual，for
example, it alarms if beyond upper and
low limit.
※It has mutual horn reset、lamp reset、
test key.
※It has functions , included alarming
flash 、lamp reset、horn auto reset.

Guangzhou Sinocon Automation Institute 15

level transmitter, temperature transmitter, pressure transmitter, high level transmitter

High level transmitter

Pressure transmitter

Temperature transmitter

Level transmitter

Guangzhou Sinocon Automation Institute 16

Guangzhou Sinocon Automation Institute 17
 Type Product profile
19、MCT-1 Magnetic compass convector MCT-1 Magnetic compass convector is a kind
of high-performance digital instrument used
Magnetic transmitter in ship ， which can change compass
navigation signal into standard
IEC61162/NEMA0183 signal, and signal
transfer to other equipment, such as AIS,
GPS, Radar ， etc. It also indicates the
compass navigation value.
The convector can set parameter and
brightness through button on operation
convector
panel. We can put magnetic sensor on the
Magnetic compass
central of Magnetic compass. Then rotate
magnetic sensor, while the value displayed
on the convector is the same as magnetic
compass, and cement sensor with glue.
All set equipment is composed of main
engine and magnetic convector, also equip
magnetic compass according the request of
customer.

Host technical specification：

※ power supply：DC24V（18~36V）
※ consume power：<8W
※ operating temperature：0-60℃
※ resolution ratio：1degree
※ precision ： ± 1 degree (few ± 2
degree)
※ output form：TTL、RS422/485
※ form：IEC61162/NEMA0183
※ Overall dimension:
convector：180X16X66 mm3
transmitter：φ58X19 mm

Guangzhou Sinocon Automation Institute 18

 20．MODEL XOC-01 OIL CONTENT METER
Product Feature: model XOC-01 oil content meter use the international general survey
technology, it suitable to apply to oil waste water on-line detection in the chemical industry,
environment protection, petroleum, electrical power, shipping and other areas. The instrument
accords with IMO Resolution MEPC60(33).
Technical Specification:
Rang Of Measurement :0~80PPM
Measure Precision: ±5 PPM
Alarm Point: 15 PPM
Alarm Relay Work Load Capacity:5A/250v
Output Analog Signals:4~20MA OR0~10Vdc
Weight: 12.5kg
Power Supply: AC220v AC220v 50hz/60hz
Consume Power: 15w

21.MODEL XOC-01 Cabin Bottom Water Alarm Instrument

Product Feature: model XOC-01 Cabin bottom water alarm instrument developed according
to the International Maritime Organization Resolution, is a kind of new product adopted
survey technology technique and digital electric circuit. It can be applied to monitor of oil
waste water on-line at the bottom of ships cabin, have function of signal memory, print .And it
can link with computer, supervised in long-distance. The instrument accords with IMO
Resolution MEPC107(49),certificated first by China Classification Society in china .
Technical Specification:
Rang Of Measuring :0~30PPM
Measure Precison: ±5 PPM
Alarm Point: 15 PPM
Alarm Relay Work Load Capacity: 5A/250v
Output Analog Signals:4~20MA OR0~10Vdc
Weight :13.5kg
Power Supply :AC220v AC220v 50hz/60hz
Consume Power:20w
Guangzhou Sinocon Automation Institute 19