BITZER Software v6.10.0 rev2160 04.07.2019 / All data subject to change.

1/4

Selection: Semi-hermetic Screw Compressors HS

Input Values
Compressor model HSK7451-70 Frequency compressor --
Refrigerant R404A Power supply 400V-3-50Hz
Reference temperature Dew point temp. Useful superheat 100%
Liq. subc. (in condenser) 0K Additional cooling Automatic
Suct. gas superheat 10,00 K Max. discharge gas temp. 80,0 °C
Operating mode Standard

Result
Q [W] Cooling capacity mHP [kg/h] Mass flow HP
P [kW] Power input Qac [kW] Additional cooling
I [A] Current tcu [°C] Liquid temp.
COP [ - ] COP/EER pm [bar(a)] ECO pressure
mLP [kg/h] Mass flow LP Qsc [kW] sub cooler capacity (ECO)

tc to 5°C 0°C -5°C -10°C -15°C -20°C -25°C -30°C

30°C Q [W] 243424 202746 167632 137453 111642 89693 -- --
P [kW] 39,0 39,5 40,0 40,5 40,8 40,9
I [A] 64,4 65,2 65,9 66,6 67,0 67,2
COP [ - ] 6,24 5,13 4,19 3,40 2,74 2,19
mLP [kg/h] 6509 5534 4676 3922 3262 2686
mHP [kg/h] 6509 5534 4676 3922 3262 2686
Qac [kW] -- -- -- -- -- --
tcu [°C] 29,6 29,6 29,6 29,6 29,6 29,6
pm [bar(a)] -- -- -- -- -- --
Qsc [kW] -- -- -- -- -- --
40°C Q [W] 208317 172729 142104 115874 93528 74611 -- --
P [kW] 50,0 50,5 50,9 51,2 51,4 51,4
I [A] 80,5 81,3 82,0 82,4 82,6 82,6
COP [ - ] 4,17 3,42 2,79 2,26 1,82 1,45
mLP [kg/h] 6329 5372 4530 3791 3144 2581
mHP [kg/h] 6329 5372 4530 3791 3144 2581
Qac [kW] -- -- -- -- -- 3,57
tcu [°C] 39,6 39,6 39,6 39,6 39,6 39,6
pm [bar(a)] -- -- -- -- -- --
Qsc [kW] -- -- -- -- -- --
50°C Q [W] 169912 139794 113964 91924 73227 57474 -- --
P [kW] 64,2 64,8 65,1 65,2 65,1 64,9
I [A] 101,9 102,9 103,4 103,5 103,4 103,0
COP [ - ] 2,65 2,16 1,75 1,41 1,12 0,89
mLP [kg/h] 6051 5118 4295 3573 2940 2387
mHP [kg/h] 6051 5118 4295 3573 2940 2387
Qac [kW] -- -- 3,91 11,44 18,46 25,0
tcu [°C] 49,7 49,7 49,7 49,7 49,7 49,7
pm [bar(a)] -- -- -- -- -- --
Qsc [kW] -- -- -- -- -- --
-- No calculation possible (see message in single point selection)
*According to EN12900 (10K suction gas superheat, 0K liquid subcooling)

Application Limits Standard HSK7451-70

BITZER Software v6.10.0 rev2160 04.07.2019 / All data subject to change. 2/4

Legend
max. tc for frequencies = 20Hz

max. tc for frequencies = 25Hz

max. tc for frequencies = 35Hz

BITZER Software v6.10.0 rev2160 04.07.2019 / All data subject to change. 3/4

Technical Data: HSK7451-70

Dimensions and Connections

Technical Data
Technical Data
Displacement (2900 RPM 50 Hz) 192 m³/h
Displacement (3500 RPM 60 Hz) 232 m³/h
Weight 305 kg
Max. pressure (LP/HP) 19 / 28 bar
Connection suction line 76 mm - 3 1/8''
Connection discharge line 54 mm - 2 1/8''
Adapter/shut-off valve for ECO 22 mm - 7/8'' (Option)
Adapter for liquid injection 16 mm - 5/8'' (Option)
Oil type R22 B150SH, B100 (Option)
Oil type R134a/R404A/R507A/R407A/R407F BSE170 (Option)
Oil type R448A/R449A BSE170 (Option)
Motor data
Motor voltage (more on request) 380-415V PW-3-50Hz
Max operating current 124.0 A
Starting current (Rotor locked) 290.0 A D / 485.0 A DD
Max. Power input 75,0 kW
Extent of delivery (Standard)
Discharge gas temperature sensor Standard
Start unloading Standard
Oil flow control SE-B2 (Standard)
Motor protection SE-E1 (Standard), SE-E3 (Standard for 660-690V)
Suction shut-off valve Standard
Capacity control 100-75-50% (Standard)
Enclosure class IP54
Available Options
Discharge shut-off valve Option
ECO connection with shut-off valve Option
Motor protection SE-i1 (200-690V)
Sound measurement
Sound power level (-10°C / 45°C) 86,0 dB(A)
Sound pressure level @ 1m (-10°C / 45°C) 78,0 dB(A)
BITZER Software v6.10.0 rev2160 04.07.2019 / All data subject to change. 4/4
Semi-hermetic Screw Compressors HS

Semi-hermetic Screw Compressors HS

HSK = Application for air-conditioning and medium temperature cooling.
HSN = Application for low temperature cooling.

Notes regarding application limits (see "Limits")

* Ranges are valid for standard operation and at full-load conditions.
* With high pressure conditions, part-load operation is partly limited (see application limits in applications manual SH-100).
* With Economizer operation the maximum admissible evaporation temperature is shifted by 10 K downward (otherwise
there is a danger of excessive compression and overload of the motor because of a higher mass flow). At pull-down
conditions from higher evaporation temperatures, the ECO injection must remain closed until the evaporation temperature is
below the maximum admissible value and a stable operation is achieved (e.g. control of the ECO solenoid valve by means
of a low pressure cut-out). The use of the ECO-system with higher evaporation temperatures requires individual consultation
with Bitzer.

HS 64/74
* Capacity control with ECO operation at the same time is limited to one single regulating step (CR 75 %). At CR 50 % the
ECO injection should be closed.

Data for sound emission

Data are based on 50 Hz application (IP-units 60 Hz) and R404A.
Sound pressure level: values are based on open air test sites with semi-spherical sound emissions at 1 meter distance. For
further information see Technical Information "Sound Data".
Legend of connection positions according to "Dimensions":
1 High pressure connection (HP)
1a Additional high pressure connection
1b Connection for high pressure transmitter (HP)
2 Low pressure connection (LP)
2a Additional low pressure transmitter (LP)
2b Connection for low pressure transmitter (LP)
3 Discharge gas temperature sensor connection (HP)
4 Connection for economizer (ECO)
HS.85: ECO valve with connection pipe (option)
HS.95, OS.85, OS.95: ECO valve (option)
5 Oil injection connection
6 Oil pressure connection for HS.85 and OS.85:
Oil drain (compressor housing)
7 Oil drain (motor housing)
7a Oil drain (suction gas filter)
7b Oil drain out of shaft seal (maintenance connection)
7c Oil drain tube (shaft seal)
8 Threaded bore for foot fastening
9 Threaded bore for pipe support (ECO and LI line)
10 Maintenance connection (oil filter)
11 Oil drain (oil filter)
12 Monitoring of oil stop valve
13 Oil filter monitoring
14 Oil flow switch
15 Earth screw for housing
16 Pressure relief (oil filter chamber)
17 Maintenance connection for shaft seal
18 Liquid injection (LI)
19 Compressor module
20 Slider position indicator
21 Oil level switch
22 Connection for oil pressure transmitter
23 Connection for oil and gas return (for systems with flooded evaporator adapter optional) 24 Access to oil circulation restrictor
SL Suction gas line
DL Discharge gas line
Dimensions can show tolerances according to EN ISO 13920-B.