D ATA B O O K

TECHNICAL

281.784.4700 USA www.wildwell.com

Well Control Emergency First Response Actions

Evacuate All Personnel Secure Location Establish Safety Zone Initiate Fire Watch Implement Emergency Response Plan - Call drilling office - Call Wild Well Control Identify Hazardous Materials On Site Monitor Well Condition Implement Pollution Abatement Measures

281.784.4700 USA

Contact the Well Control Training Division at 281.784.4770 for IADC WellCAP well control certification and course information.

Firefighting & Well Control Services Oil, Gas & Storage Wells Onshore, Inland Water, Offshore, Deepwater Surface / Subsurface Intervention Kick Resolution Well Recovery Operations Marine Firefighting Engineering Services Well Control Engineering - Well Condition Assessment - Modeling of Kick Tolerance - Well Kill Design & Modeling - Risk Analysis Relief Well Design & Implementation Contingency / Emergency Response Planning Risk Management Planning Marine Engineering Services Emergency Technical Engineering - Structure & Stability Ship & Platform Modeling Heat Abatement / Protection Systems Training / Consulting Integrated Services Hydraulic Workover (Snubbing) Rig Audits - Well Control Equipment Hot Tap, Valve Drilling, Freeze Operations Well Control Training Services IADC WellCAP IADC WellCAP Plus Crew Awareness Training Advanced Well Control

281.784.4700 USA www.wildwell.com

TECHNICAL DATA BOOK

A Quick Reference Book of Formulas, Charts and Tables

A SUPERIOR ENERGY SERVICES COMPANY 2006 Wild Well Control, Inc. The information contained herein has been collected from various sources. Accordingly, Wild Well Control, Inc. cannot and does not guarantee, warrant or represent the accuracy of or accept any responsibility for the use of any information contained herein.

Table of Contents

Acronyms & Abbreviations.................................................................................. 2 Common Formulas & Equations Capacities & Volumes for Downhole ............................................................... 4 Capacities & Volumes of Tanks........................................................................ 5 Pump Output & Rate Formulas ......................................................................... 6 Pump Pressure Relationships ............................................................................ 6 Equivalent Circulating Density ......................................................................... 7 Trip Calculations ............................................................................................... 7 Pressure & Gradient Formulas .......................................................................... 8 Kick Related Formulas & Equations Kill Sheet Calculations...................................................................................... 9 Kick Related Formulas.................................................................................... 10 Kick Related Engineering Calculations .......................................................... 11 Volumetric Method Calculations .................................................................... 12 Lubricate & Bleed Calculations ...................................................................... 12 Bullheading Calculations ................................................................................ 13 Stripping Calculations ..................................................................................... 13 Subsea Formulas ............................................................................................. 14 Accumulator Sizing......................................................................................... 14 Mud & Cement Formulas................................................................................ 15 Hydraulics Formulas ....................................................................................... 17 Estimates & Rules of Thumb Tripping........................................................................................................... 17 Stuck Pipe........................................................................................................ 18 Free Point and Stretch Estimates..................................................................... 19 Temperature Drop Across Choke or Orifice ................................................... 20 Gas Well Flow Rates....................................................................................... 20 Area of a Circle ............................................................................................... 21 Force and Pressure .......................................................................................... 21 Weight of Spiral Drill Collars ......................................................................... 21 Buoyancy Factor ............................................................................................. 21 Pipe Elongation Due to Temperature .............................................................. 22 Surface and Bottom Hole Pressures in Full Gas Column ............................... 23 Piping & Other Data Tables Drillpipe Range II......................................................................................... 24 Drillpipe Capacity & Displacement ................................................................ 25 Heavy-Weight Drillpipe .................................................................................. 26 Drill Collars..................................................................................................... 27 Drill Collar Capacity & Displacement ............................................................ 29 KILL SHEET................................................................................................. 30 API Tubing...................................................................................................... 32 Premium Connection Tubing .......................................................................... 38 Casing Strength ............................................................................................... 40 Casing Capacity............................................................................................... 43 Hole Capacity.................................................................................................. 45 Triplex Pumps at 100% Efficiency ................................................................. 46 Mud Weight Adjustments ............................................................................... 48 Mud Weights ................................................................................................... 49 Specifications for BOP Flanges, etc. .............................................................. 51 Gate Valve Data .............................................................................................. 52 API Ring Joint Flanges ................................................................................... 54 BOP Fluid Operating Volumes ....................................................................... 57 Coiled Tubing Data ......................................................................................... 61 Coiled Tubing Dimensions.............................................................................. 62 Electric Line .................................................................................................... 65 Wireline Data .................................................................................................. 66 Conversion Factors.......................................................................................... 67

Acronyms & Abbreviations

Unless otherwise defined, the following abbreviated terms are used in this book. Units are identified within specific formulas and equations.
Term bbl bpm Cap Csg DC Disp DP DS ECD Eff EMW EOB FCP FMDPP FP ft gal gpm HP ICP ID IMDPP KOP KWM MD min MW OD OMW pcf PP ppf ppg psi PV Q SF SICP SIDPP sk, sx SPM SPP stk TVD V Vol YP Description Barrel Barrels per minute Capacity Casing Drill collar Displacement Drillpipe Drillstring Equivalent circulating density Efficiency Equivalent mud weight End of build Final circulating pressure Final maximum drillpipe pressure Formation pressure Foot Gallon Gallons per minute Hydrostatic pressure Initial circulating pressure Internal diameter Initial maximum drillpipe pressure Kick off point Kill weight mud Measured depth Minutes Mud weight Outer diameter Original mud weight Pounds per cubic foot Pump pressure Pounds per foot Pounds per gallon Pounds per square inch Plastic viscosity Flow rate Safety factor Shut in casing pressure Shut in drillpipe pressure Sack, sacks Strokes per minute Slow pump pressure Stroke True vertical depth Velocity Volume Yield point

Formulas & Equations Capacities & Volumes for Downhole

Capacities

Open Hole Capacitybpf (OHCap) =

(Hole Diameter inches)2 1,029.4

Casing Capacitybpf (CsgCap) =

(Casing ID inches)2 1,029.4 (Pipe IDinches)2 1,029.4

Drill String Capacitybpf (DSCap) =

OH x DS Annular Capacitybpf (OH x DSCap) =

(HoleDiamet erinches)2 (ODStringinches)2 1029.4 ,

Csg x DS Annular Capacitybpf (Csg x DSCap) =

(Ca sin g IDinches)2 (ODStringinches)2 1029.4 ,

Multiple String Annular Capacitybpf (MSACap) =

(Ca sin g IDinches)2 (ODPipe1inches)2 + (ODPipe2inches)2 1029.4 ,

Volumes per Section Open Hole Volumebbl (OHVol) = OHCap x Lengthft Casing Volumebbl (CsgVol) = CsgCap x Lengthft Drill String Volumebbl (DSVol) = DSCap x Lengthft OH x DS Annular Volumebbl (OH x DSVol) = (OH x DSCap) x Lengthft Csg x DS Annular Volumebbl (Csg x DSVol) = (Casg x DSCap) x Lengthft Multiple String Annular Volumebbl (MSAVol) = MSACap x Lengthft

Formulas & Equations Capacities & Volumes of Tanks

Vertical Cylindrical Tanks Capacitybbl/ft = Capacitybbl/ft =

(Tank Diameterft)2
7.148

(Tank Diameterinches )2
1,029.4

Capacitybbl/inch = Capacitybbl/inch =

(Tank Diameterft)2
85.78 12,352.9

(Tank Diameterinches )2

Volumebbl = Capacitybbl/ft x Heightft Volumebbl = Capacitybbl/inch x Heightinches Rectangular Tanks Capacitybbl/ft = 0.178 x Lengthft x Widthft Capacitybbl/inch = 0.0148 x Lengthft x Widthft Volumebbl = Capacitybbl/ft x Heightft Volumebbl = Capacitybbl/inch x Heightinches Horizontal Cylindrical Tanks Volume of Tankbbl = Lengthft

(Tank Diameterinches )2
1,029.4

Content from Volume (for Horizontal Tanks) Height Ratio =

Height of Contentinches Height of Tankinches

FIND VOLUME FACTOR FROM TABLE USING CALCULATED HEIGHT RATIO: Content in Tankbbl = Vol of Tankbbl x Volume Factor
Height Ratio Volume Factor Height Ratio Volume Factor

0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50

0.019 0.052 0.092 0.142 0.195 0.252 0.310 0.373 0.430 0.500

0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00

0.560 0.626 0.690 0.747 0.800 0.857 0.900 0.948 0.980 1.000

Formulas & Equations Pump Output & Rate Formulas

Pump Outputs

FOR TRIPLEX PUMPS: Outputbbl/stk = 0.000243 x (Liner IDinches)2 x Strokeinches x Eff% FOR DUPLEX PUMPS (DOUBLE ACTING): Outputbbl/stk = 0.000162 x [2 x (Liner IDinches)2 (Rod ODinches)2] x Strokeinches x Eff% Pump Rates Ratebpm = Outputbbl/stk x SPM Rategpm = 42 x Outputbbl/stk x SPM Pumping/Spotting/Displacing Timemin =
BBL to Pump Outputbbl/stk SPM

Pump Pressure Relationships

New Pump Pressure (PP) for Rate Change
New PPpsi = New Ratebpm Old PPpsi Old Ratebpm
2

New PPpsi =

New SPM Old PPpsi Old SPM

New Pump Pressure (PP) for Density Change New PPpsi =

New MWppg Original PPpsi Original MWppg

Formulas & Equations Equivalent Circulating Density (ECD)

Equivalent Circulating Density (ECDppg) using Pressure Loss ECDppg = MWppg + Where:
Annular Friction Pressure Loss in psi is approximately equal to 10% of the pump pressure for normal hole geometries (i.e., no liners or tapered strings).
Annular Friction Pressure Losspsi 0.052 TVDft

Equivalent Circulating Density (ECDppg) using Yield Point (YP) for MW 13 ppg ECDppg = MWppg + Where:
YP = Fann 300 reading PV PV = Fann 600 reading Fann 300 reading

0.1 YP HoleDiameterinches - PipeODinches

Equivalent Circulating Density (ECDppg) using Yield Point (YP) for MW > 13 ppg ECDppg = MWppg +
0.1 HoleDiameterinches PipeODinches

PV Vft/min YP + 300 (HoleDiameterinches PipeODinches)

Trip Calculations
Trip Marginppg Trip Marginppg =
YPmud 11.7 (Hole Diameterinches - Pipe ODinches)

Trip Marginppg =

Annular Pressure Losspsi 0.052 TVDft

Slug Mud Weightppg for a given Length of Dry Pipe

(MWppg Length Dry Pipeft DP Capbbl/ft ) MWppg +

Volume of Slugbbl

Slug Weightppg =

Slug Volumebbl for a given Length of Dry Pipe Slug Volumebbl =

MWppg Length Dry Pipeft DP Capbbl/ft Slug MWbbl - MWppg

Formulas & Equations Trip Calculations, continued

Pit Gain from Slugbbl Pit Gainbbl = Slug Volumebbl
Slug Weight ppg - MWppg MWppg

Depth Slug Fallsft Depth Slug Fallsft =

Pit Gain from Slugbbl DP Capbbl/ft

Hydrostatic Pressure Drop per Vertical Foot (Ppsi/ft) when Pulling Dry Pipe Ppsi/ft =
0.052 x MWppg x DP Displ bbl/ft Annulus Capbbl/ft + DP Capbbl/ft

Hydrostatic Pressure Drop per Vertical Foot (Ppsi/ft) when Pulling Wet Pipe Ppsi/ft = 0.052 x MWppg x

(DP Capbbl/ft + DP Displbbl/ft)

Annulus Capbbl/ft

Length of Dry Pipe Pulled Before Fill-Up for Desired Pressure Drop P Lengthft =
Ppsi (Annulus Capbbl/ft + DP Caplbbl/ft) 0.052 MWppg DP Displ bbl/ft

Length of Wet Pipe Pulled Before Fill-Up for Desired Pressure Drop P Lengthft =
Ppsi Annulus Capbbl/ft 0.052 MWppg (DP Capbbl/ft + DP Displ bbl/ft)

Pressure & Gradient Formulas

Fluid Gradient (Gradientpsi/ft) Gradientpsi/ft = 0.052 x Fluid Densityppg Gradientpsi/ft = 0.007 x Fluid Densitypcf Gradientpsi/ft = 0.433 x Specific Gravity (SG) Hydrostatic Pressure (HPpsi) HPpsi = Gradientpsi/ft x TVDft HPpsi = 0.052 x MWppg x TVDft HPpsi = 0.007 x MWpcf x TVDft HPpsi = 0.433 x SG x TVDft

Formulas & Equations Kill Sheet Calculations SEE SAMPLE KILL SHEET ON PAGE 30/31.
Kill Weight Mud (KWMppg) from Original Mud Weight (OMWppg) KWMppg =

(0.052 TVDft )

SIDPPpsi

+ OMWppg

Initial Circulating Pressure (ICPpsi) ICPpsi = SIDPPpsi + SPPpsi Final Circulating Pressure (FCPpsi) FCPpsi =
SPPpsi KWMppg OMWppg

Strokes to Bit (STB) STB =

Drillstrin g Volumebbl Outputbbl / stk

Strokes for KWM to Shoe Strokes to Shoe =

Openhole Annular Volumebbl + STB Outputbbl/stk

Strokes for KWM to Surface Strokes to Surface =

Total Annular Volumebbl + STB Outputbbl/stk

Time for KWM to Bit Time to Bitmin =

STB SPM

Time for KWM to Shoe Time to Shoemin =

Strokes to Shoe SPM

Time for KWM to Surface Time to Surface =

Strokes to Surface SPM

10

Formulas & Equations Kick Related Formulas

Length of Influx Influx Lengthft =
Influx Sizebbl Lower Annulus Capbbl/ft

Expected Pit Gain (MPGbbl) with a Gas Kick in Water-Based Mud Systems MPGbbl = 4
FPpsi Original Gain bbl Annular Capbbl / ft KWMppg

Expected Surface Pressure (MSPpsi) from a Gas Kick in Water-Based Mud Systems MSPpsi = 0.20
FPpsi Original Gainbbl KWMppg Surface Annular Capbbl/ft

Maximum Allowable Mud Weight (MAMWppg) MAMWppg =

Applied Pressure + Test MWppg 0.052 TVDshoe

Note: Applied Pressure from Integrity or Leak-Off test.

Maximum Allowable Shut-In Casing Pressure (MASPpsi) MASPpsi = 0.052 x (MAMWppg MWppg) x TVDshoe Kick Tolerance (KTppg) with Influx KTppg = (MAMWppg MWppg) TVDft (MWppg MWIppg)
Influx HeightVDft TVDft TVDshoe

Where:
MWIppg = Density of influx (ppg)

Estimated Kick Density Kick Densityppg = MWppg

SICPpsi SIDPPpsi 0.052 Kick LengthTVDft
SICP psi SIDPP psi Kick LengthTVDft

Kick Gradientpsi/ft Kick Gradientpsi/ft = (MWppg 0.052)

Gas Migration Distance DistanceTVDft =

Rise in SICPpsi MWppg 0.052

Rate of Gas Migration Migration RateTVDft/min =

Distance of RiseTVDft Time for Rise min

Formulas & Equations Kick Related Engineering Calculations

Bottom Hole Pressure (BHPpsi) while Circulating on the Choke

11

BHPpsi = Hydrostatic Pressurepsi Mud in Drillstring + SIDPP Equivalent Mud Weight (EMWppg) at Bottom Hole while Circulating out a Kick EMWppg =
BHPpsi 0.052 TVD ft

Shut-In Casing Pressure (SICPpsi) SICPpsi = SIDPP psi + [0.052 (MWppg Kick Density ppg ) x Length of InfluxVDft Formation Pressure (FPpsi) FPpsi = SIDPPpsi + [0.052 x OMWppg x TVDft] FPpsi = SICP + 0.052 x [(Kick LengthVDft x Kick Densityppg) + (Mud Columnft x OMWppg)] % Reduction in Hydrostatic Pressure Due to GasCut Mud (GCMW) %Pgcm (for water-base mud) %Pgcm =
100 (OMWppg GCMWppg) GCMWppg

Leak-Off Test Pressure (LOTpsi) and Equivalent Mud Weight (EMWLOT) at Shoe LOTpsi = 0.052 x Test MWppg x TVDshoe + Applied Pressure to Leak-Offpsi EMWLOT ppg =
LOTpsi TVD shoe

Formation Integrity Test Pressure (FITpsi) and Equivalent Mud Weight (EMWFIT) at Shoe FITpsi = 0.052 x Test MWppg x TVDshoe + Applied Integrity Pressurepsi EMWFIT ppg =
FITpsi TVD shoe

Maximum Formation Pressure that can be Controlled with a Well Shut-In Max FPpsi = 0.052 x (KTppg + MWppg) x TVDft

12

Formulas & Equations Kick Related Engineering Calculations, continued

Maximum Kick Height Possible not to Exceed MASP Kick HeightVDft =
MASP Mud Gradient psi/ft - Kick Gradient psi/ft

Maximum Kick Volume Possible not to Exceed MASP Kick Volumebbl = Kick Heightft x Annulus Capbbl/ft

Volumetric Method Calculations

Initial Pressure Build Increment (IP) IPpsi = Safety Marginpsi + Rangepsi Cycle Pressure Build Increment (CP) CPpsi = Rangepsi Hydrostatic Pressure (HPLpsi/bbl) Loss per Barrel of Mud Bled in Upper Annulus HPLpsi/bbl =
Gradient Mudpsi/ft Annulus Capbbl/ft at top of hole

Bleed Volume (bbl) per Cycle Volbleed =

CPpsi HPLpsi / bbl

Lubricate & Bleed Calculations

Cycle Hydrostatic Pressure Gain (HPpsi/bbl) per Barrel of Mud Pumped in Upper Annulus HPpsi/bbl =
Gradient Lube Mud psi/ft Annulus Cap bbl/ft at top of hole

Cycle Hydrostatic Pressure Increase (HPIpsi) or Lubricated Volume (VOLbbl) to be Bled Off HPIpsi =
Gradient Lube Mud psi/ft x VOL bbl Annulus Cap bbl/ft at top of hole

VOLbbl =

HPI psi x Annulus Cap bbl/ft at top of hole Gradient Lube Mud
psi/ft

Formulas & Equations Bullheading Calculations

Kill Weight Mud (KMppg) KWMppg =
Formation Pressure psi 0.052 Perfs Depth TVDft

13

Formation Integrity Pressure (FITpsi) at Perfs Depth FITpsi = 0.052 x (EMWFIT ppg at perf) x Perfs TVDft Hydrostatic Pressure (HPpsi) in Drillpipe HPpsi = Formation Pressurepsi SIDPPpsi Initial Maximum Drillpipe Pressure (IMDPPpsi) IMDPPpsi = FITpsi HPpsi Hydrostatic Pressure from KWMppg (KMHPpsi) KMHPpsi = 0.052 x KWMppg x Perfs TVDft Final Maximum Drillpipe Pressure (FMDPPpsi) FMDPPpsi = FITpsi KMHPpsi

Stripping Calculations
Snub Force & Length of DC to Balance Pstrip Snub Force = Pstrip x OD2dc x 0.782 Length of DCft = Pstrip x OD dc x 0.785 PPF of DC Where: Pstrip = Stripping Pressure, psi Influx Height Gain from Stripping Into Heightft =
Pipe Lengthstrip x (DPCapbpf + DPDisplbpf ) Annulus Capbpf
2

Casing Pressure Increase (SICP) from Stripping into an Influx SICPpsi = Heightft x (Gradientmud Gradientinflux) Mud Volume to Bleed to Maintain Constant Bottom Hole Pressure BleedMudbbl =
Csg Pressure Incrementpsi x Annulus Capbbl/ft Mud Gradientpsi/ft

14

Formulas & Equations Subsea Formulas

Riser Differentialpsi Riser Differentialpsi = = 0.052 x [(Riser MWppg Seawater Weightppg) x Water Depthft + Riser MWppg x Air Gapft] Riser Marginppg

Riser Marginppg =

Riser Differenti alpsi 0.052 (TVDft - Water Depthft - Air Gapft )

Pump Start-Up Pressure on Casing Side Pump Start-Uppsi = SICPpsi CLFPpsi Where:
CLFP = Choke Line Friction Pressure (psi)

Initial Circulating Pressure (ICPpsi) ICPpsi = SIDPPpsi + SPPpsi through the riser Final Circulating Pressure (FCPpsi) FCPpsi = (SPPpsi through the riser)
KWMppg OMWppg

Accumulator Sizing
API Minimum Requirements 100% (S.F.= 1) of fluid volume required to close and hold closed all preventers and open an HCR valve and have a system pressure of 200 psi above minimum recommended precharge pressure remaining on the accumulator with pumps off. Standard Recommendation 150% (S.F.= 1.5) of fluid volume required to close and hold closed all preventers and open an HCR valve and have 1,200 psi system pressure remaining on the accumulator with pumps off. Fluid Volume Required (Volreqd) Volreq = S.F. x (CloseVolannular + CloseVolbop1 + CloseVolbop2 + CloseVolbop3 + CloseVolbop4 + OpenVolhcr)

Formulas & Equations Accumulator Sizing, continued

Accumulator Volume Required Usable hydraulic fluid for operation of blowout preventer equipment is affected by system pressure and nitrogen precharge. If the nitrogen precharge is at the correct (recommended) precharge, multiply the sizing factor from the table below times the fluid volume required to operate a specified number of BOP functions (Volreq) will provide the required total accumulator volume.
Accumulator System Pressure Minimum Recommended Precharge Pressure Useable Fluid

15

Accumulator Size Factor*

1,500 2,000 3,000 5,000

750 1,000 1,000 1,000

12.5% 33.0% 50.0% 63.0%

8 3 2 1.6

* Based on minimum system pressure of 1,200 psi. Accumulator Volume Example If the total fluid required for a BOP stack is 33 gallons, including the safety factor, and the accumulator has an operating pressure of 3,000 psi with a 1,000 psi minimum precharge, the accumulator volume required is 33 gallons times the size factor of 2, or 66 gallons. Accumulator Usable Fluid Volume Usable Volume = VR x Bottle Volume Where VR =
Precharge press Min operating press Precharge press Max operating press

Mud & Cement Formulas

Barite (100 lb sx) Per 100 bbl Required for Weight-Up Sacks per 100 bbl = 1,470
KWMppg - OMWppg 35 - KWMppg

Hematite (100 lb sx) Per 100 bbl Required for Weight-Up Sacks per 100 bbl = 1,680
KWMppg - OMWppg 40 - KWMppg

16

Formulas & Equations

Mud & Cement Formulas, continued

Pit Volume Increase per 100 bbl (V100bbl) due to Weight-Up with Barite V100bbl = 100
KWMppg - OMWppg 35 - KWMppg

Final Mud Weight (MWppg) when Mixing Two Densities of Mud MWppg =

(Vol1bbl MW1ppg) + (Vol2bbl MW2ppg)

Vol1bbl + Vol2bbl

Initial Mud Volume Required (IVolbbl) to Build a Final Volume of Mud with Barite IVolbbl = Final Volbbl
35 - KWMppg 35 - OMWppg

Sacks of (94 lb) Cement Required Sacks94lb =

5.615cf/bbl x Capbbl/ft x Lengthft x %Excess Yield cf/sk

Mix Fluid Requirement Mix Fluidbbl = (No. Sacks to Mix )

Mix Fluid Reqgal/sk 42gal/bbl

Balanced Plug (Cement, Barite, etc.) a) CALCULATE VOLUME OF PLUG: PlugVolbbl = LengthPlug ft x Hole Capbbl/ft b) CALCULATE LENGTH OF BALANCED COLUMN : LENGTHCOL FT =
PlugVolbbl Annulus Capbbl/ft + DP Capbbl/ft

c) CALCULATE TOTAL STRING VOLUME TO BALANCE: VolBalancebbl = = (Plug Bottom Depthft LENGTHCOL FT) x DPCapbbl/ft d) CALCULATE RATIO OF SPACER INSIDE AND OUTSIDE OF STRING: Ratiospacer =
Annular Capbbl/ft DP Capbbl/ft

e) CALCULATE DISPLACEMENT VOLUME: DisplVolbbl = VolBalancebbl Spacer Behindbbl

Formulas & Equations Hydraulics Formulas

Annular Velocity (AVft/min) Vft/min =
24.51 Pump Rategpm HoleOD 2 - PipeOD 2

17

Hydraulic Horsepower (HHP) HHP = HHP =

Qgpm x Pump Pressurepsi 1,714 Qbpm x Pump Pressurepsi 40.8

Rules of Thumb Tripping Rules of Thumb

Ideally, drillers would like to keep bottomhole hydrostatic pressure constant during the trip out (POOH) and the trip in (RIH). However, this is impossible from the operational standpoint because of swab and surge pressures. Most tripping rules-of-thumb are closely associated with maintaining a safe hydrostatic overbalance that neither causes a kick nor lost circulation.

Slug Mud Weight Rule of Thumb Slug mud weight is generally one ppg higher than the hole mud weight, with the objective being to unbalance the DP/annulus U-tube by enough to pull dry pipe. The condition of the mud, related to drill solids, and/or the mud weight range could influence the driller to accept less than one ppg.

18

Rules of Thumb Stuck Pipe

The causes of stuck pipe are broadly classified as differential or mechanical, and good monitoring and operating practices will minimize both types of pipe sticking. Differential sticking is caused by mud pressure overbalance and is influenced by drilling practices, type mud solids, permeability, bottom-hole assembly clearance, coefficient of friction and the lubricating characteristics of mud. Mechanical sticking is caused by deterioration of hole stability (shale problems, hole cleaning, etc.) and/or directional (crooked-hole) problems. Rule of Thumb for Differentially Stuck Pipe The estimated force required to pull free is equal to the contact force per unit length, times the length of pipe in contact with permeable formation times the coefficient of friction. This estimate tends to be more accurate in a straight hole than in a directional well. Estimating Formula for Differential Sticking Fdiff = K (P) Area Where:
K (P) = Sticking coefficient (0.2 water base mud) = Differential pressure

Area = Contact area

12in. d Area = L ft 3 (assume of the drill collar circumference is buried)

Circumference = x Diameter

Conclusion: Force to pull free increases as the length of pipe in contact with permeable formation increases, and as the coefficient of friction between pipe and wall increases. Example Given 6 " DC:
d 3.1416 6.25 = = 6.545 (round to 6.5) 3 3

P = 200 psi (approx. 0.5 ppg overbalance at 8,000 ft) L = 200 ft (of permeable zone) Fdiff = 0.2 x 200psi x 200ft x 12in./ft x 6.5in. = 624,000lbs

Rules of Thumb Free Point and Stretch Estimates

19

When the drill string is stuck, the free point method can be used to estimate the amount of free pipe in the hole. Begin by pulling on the pipe with an initial force (Fi) that is at least 1,000 pounds more than the hanging weight of the string, and make a reference mark on the string. Increase the pull by increments (for example, 5,000 lbs) to final force (Ff) to determine a measurable stretch. Mark the string again, measure the distance between the marks and record as the stretch (S) in inches. Record the difference between Ff and Fi as the pull increment (PI). The amount of free pipe (L) in 1,000s of feet below the rotary can then be estimated. These estimates tend to be more accurate in straight holes than in directional wells. Estimating Formula The formula for free pipe length L is: L = 1.9635 S
OD 2 ID 2 PI

The formula for pipe stretch S is: S= Where:

L = Length of free pipe (1,000s ft) S = Stretch (inches) OD = OD of the pipe (inches) ID = ID of the pipe (inches) Pl = Pull increment (1,000s lbs) = Ff - Fi
Pl L 1.9635 (OD ID )
2 2

Example Given:
Drillpipe size = 5", 19.5 lb/ft OD = 5" ID = 4.276" Calculate: Fi = 5,000 lb Ff = 35,000 lb S = 12"

PI = 35 5 = 30
25 18.284 L = 1.9635 12 = 5.27 thousand feet 30

20

Rules of Thumb Estimating Temperature Drop Across a Choke or Orifice

Rule of Thumb

The temperature drop across a choke or orifice is about one degree Fahrenheit (F) per each pressure drop of one atmosphere (rounded at 15 psi). Estimating Formula
Tdrop =

(Ph PL ) psi 1F
15 psi

Where:
Tdrop = Temperature drop (degrees) Ph PL = Gas pressure before the choke (psi) = Gas pressure after the choke (psi)

Example Calculate temperature drop if the gas pressure is reduced from 1,000 psi to 500 psi across a choke. Tdrop =
(1000 500) , 1F 15

= 33 x 1F = 33F temperature drop

Estimating Gas Well Flow Rates

Rule of Thumb The approximate flow rate (in mmscfd) of a gas well through a blowdown line choke can be estimated by multiplying 24 hours/day, times the tubing pressure plus 15, times the square of the choke size in inches and divide by 1,000. Estimating Formula Q= Where:
Q PL = Flowrate (mmscfd) = Pressure upstream of choke (psi)
24 x (PL + 15) x (Dch)2 1,000

Dch = Choke size (inches)

Rules of Thumb
Example

21

Calculate the estimated flowrate of a gas well, given that tubing pressure is 3,500 psi, and choke size is 1/4. Q=
24 x (3,500 + 15) x (0.25)2 = 5.273 mmscfd 1,000

Area of a Circle (in2)

0.7854 x D2 or D2/4 or R2 Where:
D R = diameter in inch = radius in inch

Force and Pressure

Force lb = Pressurepsi x Areasq in

Weight of Spiral Drill Collars

ppf for spiral DC = 0.96 x ppf for smooth DC of same OD & ID

Buoyancy Factor (BF)

65.4 MWppg 65.4

BF =

22

Rules of Thumb

Pipe Elongation Due to Temperature

Since the well has higher temperatures than the air above ground, an elongation will take place. Rule of Thumb Pipe will elongate about 0.83 inches, per 100 feet of length, per 100 degree F increase in temperature. Knowing the surface temperature and the average temperature of the well, the elongation can be estimated. Note: Elongation (stretch) is also caused by the hanging weight of pipe. Estimating Formulas
1F BHT = 100ft TVD + STF Ta = BHT + ST 2 in / in L T F

T = Ta Surface Temp
LT = 12in / ft 0.0000069 LT =

L T 0.83 100 ft 100F

Where:
BHT = Bottomhole temperature (F) Depth = True vertical depth (ft) ST = Surface temperature (F) Ta T
LT

= Average temperature (F) = Change in average temperature (F) = Elongation (inches) = Length of pipe (ft)

Rules of Thumb

23

Surface & Bottom Hole Pressures in Full Gas Column

Method A Approximate gas gradient is 0.1 psi/ft SP = BHP (0.lpsi/ft x TVDft) Method B Exact equation SP =BHP x e Where:
SP BHP SG D Zavg T avg = Surface Pressure (psi) = Bottom hole pressure (psi) = Specific gravity of the gas = Depth in TVD (feet = Average compressibility factor of the gas = Average gas temp in degrees Rankine(F + 460)

0.01875 SG D Zavg Tavg

My Rules of Thumb

Pipe Size In.

Nom. Wt. Lb/Ft

Wall Thick. In.

Pipe ID In.

Plain Upset End Wt. Wt. Lb/Ft Lb

Pipe Pipe API End End Dia. ID Dia. OD Designation

OD In.

Tool Joint ID Length In. Ft.

Weight Lb

with Tool Joint Capacity Displ. Bbls/Ft Bbls/Ft

without Tool Joint Capacity Displ. Bbls/Ft Bbls/Ft

24

External Upset Grade E

2 3 3 5 4 4 4 5 5 5 5 5 5 5 6 6

10.40 13.30 15.50 19.50 14.00 16.60 20.00 19.50 25.60 25.60 21.90 21.90 24.70 23.40 25.20 27.70

0.362 0.368 0.449 0.362 0.330 0.337 0.430 0.362 0.500 0.500 0.361 0.361 0.415 0.361 0.330 0.362

2.151 2.764 2.602 4.276 3.340 3.826 3.640 4.276 4.000 4.000 4.778 4.778 4.670 5.153 5.965 5.901

9.72 12.31 14.63 17.93 12.93 14.98 18.69 17.93 24.03 24.03 19.81 19.81 22.54 22.19 24.21

2.40 4.00 2.80 16.80 14.40 17.20 17.60 16.80 15.40 15.40 21.00 21.00 18.40 25.87 24.00

2.151 2.602 2.602 3.653 3.063 3.563 2.813 3.563 3.313 3.313 3.813 3.813 3.813 5.315 5.315

3.219 3.824 3.824

OH NC 38 (IF) NC 38 (IF)

3.875 4.750 5.000

2.156 2.688 2.563 3.500 3.250 3.750 2.500 2.750 3.250 3.500 3.500 4.000 3.750 4.25 5.000 4.750

1.29 1.54 1.59 1.65 1.70 1.67 1.71 1.70 1.82 1.82 1.79 2.33 2.31 2.35 2.39

34.99 0.00451 0.00389 0.00449 0.00353 61.10 0.00741 0.00515 0.00742 0.00448 74.82 0.00658 0.00606 0.00658 0.00532

Drillpipe Range II

Internal External Upset Grade X

5.188 NC 50 (EH) 6.375

External Upset Grade G

120.23 0.01745 0.00784 0.01776 0.00652 108.76 0.01082 0.00587 0.01084 0.00471 113.10 0.01421 0.00663 0.01422 0.00545 142.46 157.37 188.17 179.97 184.41 0.01252 0.01719 0.01523 0.01535 0.02162 0.00830 0.00827 0.01075 0.01066 0.00925 0.01287 0.01776 0.01554 0.01554 0.02218 0.02218 0.02119 0.02579 0.03456 0.03383 0.00680 0.00652 0.00874 0.00874 0.00721 0.00721 0.00820 0.00773 0.00807 0.00881

4.625 5.188

NC 46 (IF) NC 50 (IF)

6.000 6.375 6.250 6.625 7.250 7.250 7.250 7.000 7.000 7.000 8.000 8.000

Internal External Upset Grade G

4.250 NC 46 (EH) 5.188 NC 50 (IF) 5.188 5 FH 5.188 5 FH 5.563 5 FH 5.563 5.563 6.929 6.929 HT 55 HT 55 HT 65 HT 65

Internal External Upset Grade S

199.19 0.02172 0.00925 210.15 0.02067 0.01042 0.02521 0.00971 240.81 0.03385 0.01078 284.15 0.03297 0.01194

Drillpipe Capacity & Displacement

ID DP OD Weight Tube (In). (ppf) (In.)

25

DP ClosedDisplacement Capacity End (bbl/ft) (bbl/ft) (bbl/ft)

4.85 1.995 6.65 1.815 6.45 2.469 6.85 2.441 8.35 2.323 10.40 2.151 8.50 3.063 9.50 2.992

0.00387 0.00320 0.00592 0.00579 0.00524 0.00449 0.00911 0.00870 0.00817 0.00742 0.00658 0.01174 0.01084 0.01020 0.01554 0.01522 0.01422 0.01287 0.01888 0.01776 0.01725 0.02218 0.02119 0.02579 0.02472 0.02309 0.03573 0.03456 0.03224 0.04718

0.0016 0.0023 0.0021 0.0022 0.0028 0.0035 0.0028 0.0032 0.0037 0.0045 0.0053 0.0038 0.0047 0.0053 0.0041 0.0045 0.0055 0.0068 0.0054 0.0065 0.0070 0.0072 0.0082 0.0077 0.0088 0.0104 0.0069 0.0081 0.0104 0.0093

0.0055 0.0055 0.0080 0.0080 0.0080 0.0080 0.0119 0.0119 0.0119 0.0119 0.0119 0.0155 0.0155 0.0155 0.0197 0.0197 0.0197 0.0197 0.0243 0.0243 0.0243 0.0294 0.0294 0.0335 0.0335 0.0335 0.0426 0.0426 0.0426 0.0565

11.20 2.900 13.30 2.764 15.50 2.602 11.85 3.476

14.00 3.340 15.70 3.240 12.75 4.000

13.75 3.958 16.60 3.826 20.00 3.640 16.25 4.408

19.50 4.276 20.50 4.214 21.90 4.778 24.70 4.670 23.40 5.153 26.30 5.045 28.67 4.875 22.20 6.065

6 7

25.20 5.965 31.90 5.761 29.25 6.969

Note: Capacity and displacement value are without tool joint.

26

Nominal Tube Dimensions Nominal Size Inside Dia. Wall In. In. Thickness In.

Tool Joint Connection Size In. Outside Dia. In. Inside Dia. In.

Approx. Weight Tube & Joints lb/ft

Make-up Torque (ft-lb)

Capacity Displacement bbls/ft bbls/ft

3 3 4 4 5 5 6

2 1/16 2 2 9/16 2 3 3 4

0.719 0.625 0.719 0.875 1.000 1.063 1.063

NC 38 (3 IF) NC 38 (3 IF) NC 40 (4 FH) NC 46 (4 IF) NC 50 (4 IF) 5 FH 6 FH

4 4 5 6 6 7 8

2 3/16 2 2 11/16 2 3 1/16 3 4

25.3 23.2 27.2 41.0 49.3 57.0 70.8

9,900 9,900 13,250 21,800 29,400 33,200 46,900

0.0042 0.0050 0.0073 0.0074 0.0088 0.0111 0.0196

0.0092 0.0084 0.0100 0.0149 0.0179 0.0207 0.0257

Heavy-Weight Drillpipe

OD 4" 4 " 4 " 4 " 5" 5 " 5 " 5 " 6" 6 " 6 "

Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft

ID Capacity

36.7 0.0133 42.2 0.0153 48.1 0.0175 54.3 0.0197 60.8 0.0221 67.6 0.0246 74.8 0.0272 82.3 0.0299 90.1 0.0328 98.0 0.0356 107.0 0.0389

1 " 0.0022

34.5 0.0125 40.0 0.0145 45.9 0.0167 52.1 0.0189 58.6 0.0213 65.4 0.0238 72.6 0.0264 80.1 0.0291 87.9 0.0320 95.8 0.0349 104.8 0.0381

1 " 0.0030

32.0 0.0116 37.5 0.0136 43.4 0.0158 49.6 0.0181 56.1 0.0204 62.9 0.0229 70.1 0.0255 77.6 0.0282 85.4 0.0311 93.3 0.0339 102.3 0.0372

2" 0.0039

29.2 0.0106 34.7 0.0126 40.6 0.0148 46.8 0.0170 53.3 0.0194 60.1 0.0219 67.3 0.0245 74.8 0.0272 82.6 0.0301 90.5 0.0329 99.5 0.0362

2 " 0.0049

43.6 0.0159 50.1 0.0182 56.9 0.0207 64.1 0.0233 71.6 0.0261 79.4 0.0289 87.3 0.0318 96.3 0.0350

2 " 0.0061

53.4 0.0194 60.6 0.0221 68.1 0.0248 75.9 0.0276 83.8 0.0305 92.8 0.0338

2 " 0.0073

56.8 0.0207 64.3 0.0234 72.1 0.0262 80.0 0.0291 89.0 0.0324

3" 0.0087

Spiral Drill -Collars Approx. Displacement of Spiral Drill Collar in bbls/ft - OD 2 - ID 2 2.56 - 2,747 67.9 63.4 0.0247 0.0231 75.8 71.3 0.0276 0.0259 84.8 80.3 0.0308 0.0292

3 " 0.0103

3 " 0.0119

3 " 0.0137

Drill Collars

27

OD 6 " 7" 7 " 7 " 7 " 8" 8 " 8 " 8 " 9" 10"

Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft Wt lb/ft Disp bbl/ft

ID Capacity

116.0 0.0422 125.0 0.0455 134.0 0.0487 144.0 0.0524 154.0 0.0560 165.0 0.0600 176.0 0.0640 187.0 0.0680 199.0 0.0724 210.2 0.0765 260.9 0.0950

1 " 0.0022

113.8 0.0414 122.8 0.0447 131.8 0.0479 141.8 0.0516 151.8 0.0552 162.8 0.0592 173.8 0.0632 184.8 0.0672 196.8 0.0716 208.0 0.0757 258.8 0.0942

1 " 0.0030

111.3 0.0405 120.3 0.0438 129.3 0.0470 139.3 0.0507 149.3 0.0543 160.3 0.0583 171.3 0.0623 182.3 0.0663 194.3 0.0707 205.6 0.0748 256.3 0.0933

2" 0.0039

108.5 0.0395 117.5 0.0427 126.5 0.0460 136.5 0.0497 146.5 0.0533 157.5 0.0573 168.5 0.0613 179.5 0.0653 191.5 0.0697 202.7 0.0738 253.4 0.0923

2 " 0.0049

105.3 0.0383 114.3 0.0416 123.3 0.0449 133.3 0.0485 143.3 0.0521 154.3 0.0561 165.3 0.0601 176.3 0.0641 188.3 0.0685 199.6 0.0726 250.3 0.0911

2 " 0.0061

101.8 0.0370 110.8 0.0403 119.8 0.0436 129.8 0.0472 139.8 0.0509 150.8 0.0549 161.8 0.0589 172.8 0.0629 184.8 0.0672 196.0 0.0714 246.8 0.0898

2 " 0.0073

98.0 0.0356 107.0 0.0389 116.0 0.0422 126.0 0.0458 136.0 0.0495 147.0 0.0535 158.0 0.0575 169.0 0.0615 181.0 0.0658 192.2 0.0700 242.9 0.0884

3" 0.0087

93.8 0.0341 102.8 0.0374 111.8 0.0407 121.8 0.0443 131.8 0.0479 142.8 0.0520 153.8 0.0560 164.8 0.0600 176.8 0.0643 188.0 0.0685 238.8 0.0869

3 " 0.0103

89.3 0.0325 98.3 0.0358 107.3 0.0390 117.3 0.0427 127.3 0.0463 138.3 0.0503 149.3 0.0543 160.3 0.0583 172.3 0.0697 183.5 0.0668 234.3 0.0853

3 " 0.0119

93.4 0.0340 102.4 0.0372 112.4 0.0409 122.4 0.0445 133.4 0.0485 144.4 0.0525 155.4 0.0565 167.4 0.0609 178.7 0.0651 229.4 0.0835

3 " 0.0137

28
Drill Collars

Drill Collar Capacity & Displacement

DC OD (In.) DC ID (In.)

29

DC Capacity Steel Displ. Closed-End (bbl/ft) (bbl/ft) (bbl/ft)

3 3 4 4 6 6 6 8 8 8 9 9 10 10 11 11 12

1.250 1.500 2.000 2.000 2.250 2.500 2.500 2.813 2.875 2.875 2.875 2.875 2.875 2.875 2.875 2.875 2.875

0.00152 0.00219 0.00389 0.00389 0.00492 0.00607 0.00607 0.00768 0.00803 0.00803 0.00803 0.00803 0.00803 0.00803 0.00803 0.00803 0.00803

0.0080 0.0115 0.0126 0.0181 0.0301 0.0318 0.0350 0.0545 0.0589 0.0622 0.0707 0.0796 0.0891 0.0991 0.1095 0.1204 0.1319

0.0095 0.0137 0.0165 0.0219 0.0350 0.0379 0.0410 0.0622 0.0661 0.0629 0.0787 0.0877 0.0971 0.1071 0.1175 0.1285 0.1399

Well Data
Date TD Mud weight Slow pump Fast pump Pump output
Drill String Capacity

Kick Data
SIDP psi | SICP psi bbl ppg ft
281.784.7400 USA www.wildwell.com

30

| TVD ppg psi @ psi @ bbl/stk

Annulus Capacity

Volume gained Old mud weight (OMW) SPM SPM Bit at

Kill Data ("Wait & Weight" Method)

Kill Sheet

Kill rate (slow or fast pump) = _________ SPM Sec. A Sec. B Sec. C Sec. D Sec. E
Total

bbl bbl bbl bbl bbl

bbl

Sec. F Sec. G Sec. H

bbl bbl bbl bbl bbl

Kill weight mud (KWM) = OMW +

SIDPP = _________ ppg 0.052 TVD

Initial circulation pressure (ICP) = SIDP + Kill rate pressure = _________ psi Final circulation pressure (FCP) = Kill rate pressure x

KWM = _________ psi OMW

Surface to bit __________ strokes | Bit to surface __________ strokes One circulation __________ strokes

Total

bbl

NOTE: Enlarge page by 125% to get 8 x11" full-size worksheet.

Kill Schedule ("Wait & Weight" Method)

Strokes Volumes Drillpipe Press Strokes Volume Drillpipe Press

Casing size Set at

ICP

To Bit Kill Chart

FCP

Kill Sheet

Bit at TD at

ft ft STROKES

PRESSURE

31

32

Tubing Size Nominal In. OD In.

Normal Weight T&C NonUpset lb/ft T&C Upset lb/ft Grade

Wall Thick. In.

Threaded Coupling Inside Dia. In. Drift Dia In. Coupling Outside dia. NonUpset Upset In. Rea. In. Upset Spec In.

Collapse Resistance PSI

Internal Yield Pressure PSI

Joint Yield Strength T&C Non-Upset Lb T&C Upset Lb Capacity bbl/ft

Displacement T&C Non-Upset bbl/ft T&C Upset bbl/ft

1.050

1.14 1.14 1.14 1.14 1.70 1.70 1.70 1.70 2.30 2.30 2.30 2.30 2.30 2.30

1.20 1.20 1.20 1.20 1.80 1.80 1.80 1.80 2.40 2.40 2.40 2.40 2.40 2.40

H-40 J-55 C-75 N-80 H-40 J-55 C-75 N-80 H-40 H-40 J-55 J-55 C-75 N-80

0.113 0.113 0.113 0.113 0.133 0.133 0.133 0.133 0.125 0.140 0.140 0.140 0.140 0.140

.824 .824 .824 .824 1.049 1.049 1.049 1.049 1.410 1.380 1.410 1.380 1.380 1.380

.730 .730 .730 .730 .955 .955 .955 .955 1.286 1.286 1.286 1.286 1.286 1.286

1.313 1.313 1.313 1.313 1.660 1.660 1.660 1.660 2.054 2.054 2.054 2.054 2.054 2.054

1.660 1.660 1.660 1.660 1.900 1.900 1.900 1.900 2.200 2.200 2.200 2.200 2.200 2.200

7,680 10,560 14,410 15,370 7,270 10,000 13,640 14,550 5,570 6,180 7,660 8,490 11,580 12,360

7,530 10,560 14,130 15,070 7,080 9,730 13,270 14,160 5,270 5,900 7,250 8,120 11,070 11,810

6,360 8,740 11,920 12,710 10,960 15,060 20,540 21,910 15,530 21,360 21,360 29,120 31,060

13,300 18,290 24,940 26,610 19,760 27,160 37,040 39,510 26,740 36,770 36,770 50,140 53,480

0.00066 0.00066 0.00066 0.00066 0.00107 0.00107 0.00107 0.00107 0.00193 0.00185 0.00185 0.00185 0.00185 0.00185

0.00041 0.00041 0.00041 0.00041 0.00062 0.00062 0.00062 0.00062 0.00084 0.00084 0.00084 0.00084 0.00084

0.00044 0.00044 0.00044 0.00044 0.00065 0.00065 0.00065 0.00065 0.00087 0.00087 0.00087 0.00087 0.00087

1.050 1.050 1.050 1.315 1.315 1.315 1.315 1.660 1.660 1.660 1.660 1.660 1.660

API Tubing

Tubing Size Nominal In. OD In.

Normal Weight T&C NonUpset lb/ft T&C Upset lb/ft Grade

Wall Thick. In.

Threaded Coupling Inside Dia. In. Drift Dia In. Coupling Outside dia. NonUpset Upset In. Rea. In. Upset Spec In.

Collapse Resistance PSI

Internal Yield Pressure PSI

Joint Yield Strength T&C Non-Upset Lb T&C Upset Lb Capacity bbl/ft

Displacement T&C Non-Upset bbl/ft T&C Upset bbl/ft

1.900 1.900

2.75 2.75 2.75 2.75 2.75 2.75

2.90 2.90 2.90 2.90 2.90 2.90

H-40 H-40 J-55 J-55 C-75 N-80 H-40 J-55 C-75 N-80

0.145 0.145 0.125 0.145 0.145 0.145 0.156 0.156 0.156 0.156

1.650 1.610 1.650 1.610 1.610 1.610 1.751 1.751 1.751 1.751

1.516 1.516 1.516 1.516 1.516 1.516

2.200 2.200 2.200 2.200 2.200 2.200

2.500 2.500 2.500 2.500 2.500 2.500

4,920 5,640 6,640 7,750 10,570 11,280 7,770 7,690 10,480 11,180

4,610 5,340 6,330 7,350 10,020 10,680 7,630 7,280 9,920 10,590

19,090 19,090 19550 26,250 35,800 38,130

31,980 31,980 19550 43,970 59,960 63,950

0.00252 0.00252 0.00264 0.00252 0.00252 0.00252 0.00298 0.00298 0.00298 0.00298

0.00100 0.00100 0.00100 0.00100 0.00100 0.00100

0.00106 0.00106

API Tubing

1 1/2

1.900 1.900 1.900 1.900 2.063

0.00106 0.00106 0.00106 0.00106

2 1/16

2.063 2.063 2.063

33

34

Tubing Size Nominal In. OD In.

Normal Weight T&C NonUpset lb/ft T&C Upset lb/ft Grade

Wall Thick. In.

Threaded Coupling Inside Dia. In. Drift Dia In. Coupling Outside dia. NonUpset Upset In. Rea. In. Upset Spec In.

Collapse Resistance PSI

Internal Yield Pressure PSI

Joint Yield Strength T&C Non-Upset Lb T&C Upset Lb Capacity bbl/ft

Displacement T&C Non-Upset bbl/ft T&C Upset bbl/ft

2.375 2.375 2.375 2.375 2.375

4.00 4.60 4.60 4.60 4.60 4.60 5.80 4.60 4.60 5.80 4.60 5.80 4.70 4.70 4.70 4.70 4.70 5.95 4.70 4.70 5.95 4.70 5.95

H-40 H-40 J-55 J-55 C-75 C-75 C-75 N-80 N-80 N-80 P-105 P-105

0.167 0.190 0.190 0.190 0.190 0.190 0.254 0.190 0.190 0.254 0.190 0.254

2.041 1.995 1.995 1.995 2.041 1.995 1.867 2.041 1.995 1.867 1.995 1.867

1.947 1.901 2.041 2.041 1.901 1.901 1.773 1.901 1.901 1.773 1.901 1.773

2.875 2.875 2.875 2.875 2.875 2.875 2.875 2.875 2.875 2.875 2.875 2.875 3.063 3.063 3.063 3.063 3.063 3.063 3.063 3.063 3.063 3.063 3.063 2.910 2.910 2.910 2.910 2.910 2.910 2.910 2.910 2.910 2.910 2.910

5,230 5,890 7,190 8,100 9,520 11,040 14,330 9,980 11,780 15,280 15,460 20,060

4,920 5,600 6,770 7,700 9,230 10,500 14,040 9,840 11,200 14,970 14,700 19,650

30,130 35,960 49,450 49,450 67,430 67,430 96,560 71,930 71,930 102,990 94,410 135,180 52,170 71,730 71,730 97,820 97,820 126,940 104,340 104,340 135,400 136,940 177.710

0.00405 0.00387 0.00387 0.00387 0.00387 0.00387 0.00339 0.00387 0.00387 0.00339 0.00387 0.00339

0.00146 0.00167 0.00167 0.00167 0.00167 0.00167 0.00211 0.00167 0.00167 0.00211 0.00167 0.00211 0.00171 0.00171 0.00171 0.00171 0.00171 0.00216 0.00171 0.00171 0.00216 0.00171 0.00216

API Tubing

2 3/ 8

2.375 2.375 2.375 2.375 2.375 2.375 2.375

Tubing Size Nominal In. OD In.

Normal Weight T&C NonUpset lb/ft T&C Upset lb/ft Grade

Wall Thick. In.

Threaded Coupling Inside Dia. In. Drift Dia In. Coupling Outside dia. NonUpset Upset In. Rea. In. Upset Spec In.

Collapse Resistance PSI

Internal Yield Pressure PSI

Joint Yield Strength T&C Non-Upset Lb T&C Upset Lb Capacity bbl/ft

Displacement T&C Non-Upset bbl/ft T&C Upset bbl/ft

2.875 2.875 2.875

6.40 6.40 6.40 8.60 6.40 8.60 6.40 8.60 7.70 9.20 10.20 7.70

6.50 6.50 6.50 8.70 6.50 8.70 6.50 8.70

H-40 J-55 C-75 C-75 N-80 N-80 P-105 P-105 H-40

0.217 0.217 0.217 0.308 0.217 0.308 0.217 0.308 0.216 0.254 0.289 0.215

2.441 2.441 2.441 2.259 2.441 2.259 2.441 2.259 3.068 2.992 2.922 3.068

2.347 2.347 2.347 2.165 2.347 2.165 2.347 2.165 2.943 2.867 2.797 2.943

3.500 3.500 3.500 3.500 3.500 3.500 3.500 3.500 4.250 4.250 4.250 4.250

3.668 3.668 3.668 3.668 3.668 3.668 3.668 3.668

3.460 3.460 3.460 3.460 3.460 3.460 3.460 3.460

5,580 7,680 10,470 14,350 11,170 15,300 14,010 20,090 4,630

5,280 7,260 9,910 14,060 10,570 15,000 13,870 19,690 4,320 5,080 5,780 5,940

52,780 72,580 98,970 149360

72,480 99,660 135,900 185,290

0.00579 0.00579 0.00579 0.00496 0.00579 0.00496 0.00579 0.00496 0.00914

0.00233 0.00233 0.00233 0.00313 0.00233 0.00313 0.00233 0.00313 0.00280 0.00335 0.00371

0.00236 0.00236 0.00236

API Tubing

2 7/8

2.875 2.875 2.875 2.875 2.875 3.500

0.00317 0.00236 0.00317 0.00236 0.00317

105,570 144,960 159,310 198,710 138,560 190,260 209,100 260,810 65,070 79,540 92,550 89,470 103,810

3 1/ 2

3.500 3.500 3.500

9.30

H-40 H-40 J-55

4.500

4.180

5,380 6,060 5,970

0.00870 0.00829 0.00914

0.00338

35

0.00262

36

Tubing Size Nominal In. OD In.

Normal Weight T&C NonUpset lb/ft T&C Upset lb/ft Grade

Wall Thick. In.

Threaded Coupling Inside Dia. In. Drift Dia In. Coupling Outside dia. NonUpset Upset In. Rea. In. Upset Spec In.

Collapse Resistance PSI

Internal Yield Pressure PSI

Joint Yield Strength T&C Non-Upset Lb T&C Upset Lb Capacity bbl/ft

Displacement T&C Non-Upset bbl/ft T&C Upset bbl/ft

3.500 3.500 3.500 3.500 3.500

9.30 10.20 7.70 10.20 12.70 7.70 10.20 12.70 9.20 12.70 12.95 9.30 12.95 12.95

J-55 J-55 C-75 C-75 C-75 N-80 N-80 N-80 P-105 P-105

0.289 0.289 0.216 0.289 0.375 0.216 0.289 0.375 0.254 0.375

2.922 2.922 3.068 2.922 2.750 3.068 2.922 2.750 2.992 2.750

2.797 2.797 2.943 2.797 2.625 2.943 2.797 2.625 2.867 2.625

4.250 4.250 4.250 4.250 4.250 4.250 4.250 4.250 4.250 4.250 4.500 4.500 4.500 4.180 4.180 4.180 4.500 4.180

7,400 8,330 7,540 11,360 14,350 7,870 12,120 15,310 13,050 20,090

6,990 7,950 8,100 10,840 14,060 8,640 11,560 15,000 13,340 19,690

127,250 127,250 122,010 173,530 230,990 130,140 185,100 246,390 208,800 323,390 294,530 271,970 386,570 276,120

0.00829 0.00829 0.00914 0.00829 0.00735 0.00914 0.00829 0.00735 0.00870 0.00735

0.00371 0.00371

API Tubing

0.00280 0.00371 0.00462 0.00280 0.00371 0.00462 0.00335 0.00462 0.00471 0.00338 0.00471 0.00471

1/

3.500 3.500 3.500 3.500 3.500

Tubing Size Nominal In. OD In.

Normal Weight T&C NonUpset lb/ft T&C Upset lb/ft Grade

Wall Thick. In.

Threaded Coupling Inside Dia. In. Drift Dia In. Coupling Outside dia. NonUpset Upset In. Rea. In. Upset Spec In.

Collapse Resistance PSI

Internal Yield Pressure PSI

Joint Yield Strength T&C Non-Upset Lb T&C Upset Lb Capacity bbl/ft

Displacement T&C Non-Upset bbl/ft T&C Upset bbl/ft

4.000 4.000 4.000

9.50 11.00 9.50 11.00 9.50 11.00 9.50 11.00 12.60 12.60 12.60 12.60 12.75 12.75 12.75 12.75

H-40 H-40 J-55 J-55 C-75 C-75 N-80 N-80 H-40 J-55 C-75 N-80

0.226 0.262 0.226 0.262 0.226 0.262 0.226 0.262 0.271 0.271 0.271 0.271

3.548 3.476 3.548 3.476 3.548 3.476 3.548 3.476 3.958 3.958 3.958 3.958

3.423 3.351 3.423 3.351 3.423 3.351 3.423 3.351 3.833 3.833 3.833 3.833

4.750 5.000 4.750 5.000 4.750 5.000 4.750 5.000 5.200 5.200 5.200 5.200 5.563 5.563 5.563 5.563

4,050 4,900 5,110 6,590 6,350 8,410 6,590 8,800 4,490 5,730 7,200 7,500

3,960 4,590 5,440 6,300

72,000 123,070 99,010 169,220 135,010

0.01223 0.01174 0.01223 0.01174 0.01223 230,750 0.01174 0.01223 246,140 0.01174 0.01522 0.01522 0.01522 0.01522

0.00346 0.00400 0.00346

API Tubing

4.000 4.000 4.000 4.000 4.000 4.500

0.00400 0.00346 0.00400 0.00346 0.00400 0.00458 0.00458 0.00458 0.00458 0.00464 0.00464 0.00464

8,600 7,910 9,170 4,220 5,800 7,900 8,430 104,360 143,500 195,680 208,730 144,010

144,020 198,030 270,040 288,040

4 1/ 2

4.500 4.500 4.500

37

0.00464

Tubing Size
" CS HYDRIL 1.5# P-110 1" CS HYDRIL 2.25# C-75 1" CS HYDRIL 2.25# N-80/L-80 1" CS HYDRIL 2.25# T-95 1" CS HYDRIL 2.25# P-110 1" CS HYDRIL 2.25# S-135 1-" CS HYDRIL 3.02# C-75 1-" CS HYDRIL 3.02# N-80/L-80 1-" CS HYDRIL 3.02# T-95 1-" CS HYDRIL 3.02# P-110 1-" CS HYDRIL 3.02# S-135 1-" CS HYDRIL 3.64# N-80/L-80 1-" CS HYDRIL 3.64# P-110 1-" CS HYDRIL 3.64# S-135 2-1/16" CS HYDRIL 3.25# N-80/L-80 2-" EUE 8RD 4.7# N-80/L-80

Outer Dia. In.

Connection Data

Inner MakeGrade Dia. up In. Torque

Outer Dia. In.

Inner Dia. In.

Tube Data
Drift Wall Cross Thick Section 100% Yield Ult. Strength Depth 100% Pull 100%

38

PSI Burst 100%

Collapse Cap. Disp. 100% Gals/1000 ft

Capacity Disp. bbls/ft

1.327 0.687 1.600 0.864 1.600 0.864 1.600 0.864 1.600 0.864 1.600 0.864 1.927 1.218 1.927 1.218 1.927 1.218 1.927 1.218 1.927 1.218 2.162 1.440 2.162 1.440 2.162 1.440 2.330 1.700

300 400 400 400 400 500 600 600 600 600 600 800 800 800 900

P-110 C-75 T-95 P-110 S-135 C-75 T-95 P-110 S-135 P-110 S-135

1.050 0.742 0.648 0.154 0.433 110,000 125,000 31,700 1.315 0.957 0.848 0.179 0.639 1.315 0.957 0.848 0.179 0.639 75,000 95,000 21,300 80,000 100,000 22,600 95,000 105,000 27,000

47,600 48,000 51,000 60,700 70,300 86,200 66,000 71,000 83,700 96,600 85,000

32,200 26,200 20,400 17,600 21,800 18,800 25,900 22,300 29,900 25,900 36,700 31,700 17,200 15,200 18,400 16,200 21,900 19,300 25,300 22,400 16,800 15,000

22.5 37.4 37.4 37.4 37.4 37.4 66.6 66.6 66.6 66.6 66.6 91.8 91.8 91.8

15.3 0.00054 0.00036 34.4 0.00089 0.00082 34.4 0.00089 0.00082 34.4 0.00089 0.00082 34.4 0.00089 0.00082 34.4 0.00089 0.00082 46.2 0.00159 0.00110 46.2 0.00159 0.00110 46.2 0.00159 0.00110 46.2 0.00159 0.00110 46.2 0.00159 0.00110 55.7 0.00219 0.00133 55.7 0.00219 0.00133 55.7 0.00219 0.00133 49.7 0.00298 0.00118 71.9 0.00386 0.00171

Premium Connection Tubing

N-L-80 1.315 0.957 0.848 0.179 0.639

1.315 0.957 0.848 0.179 0.639 110,000 125,000 31,200 1.315 0.957 0.848 0.179 0.639 135,000 145,000 38,300 1.660 1.278 1.184 0.191 0.881 1.660 1.278 1.184 0.191 0.881 75,000 95,000 21,800 80,000 100,000 23,500 95,000 105,000 27,700

N-L-80 1.660 1.278 1.184 0.191 0.881

1.660 1.278 1.184 0.191 0.881 110,000 125,000 32,000 80,000 100,000 23,300

1.660 1.278 1.184 0.191 0.881 135,000 145,000 39,400 119,000 31,000 27,500 1.900 1.500 1.406 0.200 1.068 110,000 125,000 32,300 117,500 23,000 20,700 1.900 1.500 1.406 0.200 1.068 135,000 145,000 39,600 144,199 28,421 25,429 80,000 100,000 23,000 75,000

N-L-80 1.900 1.500 1.406 0.200 1.068

N-L-80 2.063 1.751 1.657 0.156 0.935 N-L-80 2.375 1.995 1.901 0.190 1.304

12,100 11,200 125.0

3.063 1.995 1,500

80,000 100,000 22,200 104,300 12,800 11,770 162.3

Tubing Size
2-" PH-6 HYDRIL 5.95# N-80/L-80 2-" PH-6 HYDRIL 5.95# RY-85 2-" PH-6 HYDRIL 5.95# T-95 2-" PH-6 HYDRIL 5.95# P-110 2-" EUE 8RD 6.5# N-80/L-80 2-" PH-6 HYDRIL 8.7# N-80/L-80 2-" PH-6 HYDRIL 7.9# N-80/L-80 2-" PH-6 HYDRIL 7.9# T-95 2-" PH-6 HYDRIL 7.9# P-110 3-" EUE 8RD 9.3# N-80/L-80 3-" EUE 8RD 9.3# P-110 3-" PH-6 HYDRIL 12.95# N-80/L-80 3-" PH-6 HYDRIL 12.95# T-95 3-" PH-6 HYDRIL 12.95# P-110 4-" PH-6 HYDRIL 15.50# P-110

Outer Dia. In.

Connection Data

Inner MakeGrade Dia. up In. Torque

Outer Dia. In.

Inner Dia. In.

Tube Data
Drift Wall Cross Thick Section 100% Yield Ult. Strength Depth 100% Pull 100%

PSI Burst 100%

Collapse Cap. Disp. 100% Gals/1000 ft

Capacity Disp. bbls/ft

2.906 1.805 2,200 2.906 1.805 2,200 2.906 1.805 2,200 2.906 1.805 2,700 3.668 2.441 2,300 3.500 2.200 3,000 3.437 2.265 3,000 3.437 2.265 3,200

N-L-80 2.375 1.867 1.773 0.254 1.692 RY-85 T-95 P-110 2.375 1.867 1.773 0.254 1.692 2.375 1.867 1.773 0.254 1.692

80,000 100,000 22,700 135,000 17,100 15,300 142.2 85,000 100,000 24,100 143,800 18,200 16,240 142.2 95,000 110,000 27,000 160,740 19,665 17,595 142.2

91.0 0.00339 0.00217 91.0 0.00339 0.00217 91.0 0.00339 0.00217 91.0 0.00339 0.00217 99.5 0.00579 0.00237

Premium Connection Tubing 39

2.375 1.867 1.773 0.254 1.692 105,000 120,000 29,900 178,000 22,500 20,060 142.2 80,000 100,000 22,300 145,000 12,100 11,160 243.0

N-L-80 2.875 2.441 2.347 0.217 1.812 N-L-80 2.875 2.259 2.165 0.308 2.484 N-L-80 2.875 2.323 2.229 0.276 2.254 T-95 2.875 2.323 2.229 0.276 2.254

80,000 100,000 22,800 198,700 17,140 15,300 208.1 133.1 0.00495 0.00317 80,000 100,000 22,800 180,000 15,300 13,900 220.0 120.9 0.00524 0.00288 95,000 110,000 27,098 214,082 18,000 16,000 220.0 120.9 0.00524 0.00288

3.437 2.265 3,500 P-110 2.875 2.323 2.229 0.276 2.254 105,000 120,000 29,900 236,000 20,100 18,200 220.0 120.9 0.00524 0.00288 2,4004.500 2.992 3,200 N-L-80 3.500 2.992 2.867 0.254 2.590 80,000 100,000 22,200 207,200 11,600 10,700 365.2 134.5 0.00870 0.00320 3,0004.500 2.992 4,000 P-110 3.500 2.992 2.867 0.254 2.590 110,000 125,000 30,600 284,900 15,900 14,800 365.2 134.5 0.00870 0.00320 4.312 2.687 5,500 4.313 2.687 6,000 4.312 2.687 7,000 5.125 3.765 8,500 N-L-80 3.500 2.750 2.625 0.375 3.682 T-95 P-110 P-110 3.500 2.750 2.625 0.375 3.682 80,000 100,000 22,700 294,500 17,100 15,310 308.4 198.1 0.00734 0.00472 95,000 105,000 27,000 386,600 20,300 18,100 308.4 198.1 0.00734 0.00472

3.500 2.750 2.625 0.375 3.682 105,000 120,000 29,800 386,600 22,500 20,090 308.4 198.1 0.00734 0.00472 4.500 3.826 3.701 0.337 4.407 110,000 125,000 31,300 485,000 16,480 14,340 598.0 229.2 0.01424 0.00546

Casing OD (In.)

Weight (ppf)

40

H40

J/K 55

Burst Pressure (psi) C75 N80

C95

P110

H40

J/K 55

Collapse Pressure (psi) C75 N80

C95

P110

9.5 11.6 13.5 15.1 11.5 13.0 15.0 18.0 14.0 15.5 17.0 20.0 23.0 20.0 24.0 28.0 20.0 23.0 26.0 29.0 32.0 35.0

2,720

4,380 5,350 6,200 7,210 4,240 4,870 5,700 6,970 4,270 4,810 5,320 6,310 7,270 4,180 5,110 6,060 3,740 4,360 4,980 5,610 6,230 6,850

7,290 8,460 9,830 6,640 7,770 9,500 5,820 6,560 7,250 8,610 9,900 6,970 8,260 5,100 5,940 6,790 7,650 8,490 9,340

7,780 9,020 10,480 7,090 8,290 10,140 7,000 7,740 9,190 10,560 6,090 7,440 8,810 6,340 7,240 8,160 9,060 9,960

9,240 10,710

10,690 12,410 14,420 11,400 13,940 9,620 10,640 12,640 14,520 10,230 12,120 9,960 11,220 12,460 13,700

9,840 12,040 9,190 10,910 12,540 7,230 8,830 10,460 7,530 8,600 9,690 10,760 11,830

1,920

3,310 4,960 6,420 7,620 3,060 4,140 5,500 7,390 3,120 3,860 4,910 6,610 7,670 3,060 4,560 6,170 2,500 3,270 4,320 5,400 6,460 7,270

6,100 8,140 10,390 4,990 6,970 10,000 3,560 4,860 6,070 8,440 10,400 5,550 7,830 2,660 3,770 5,250 6,760 8,230 9,710

6,350 8,540 11,080 5,140 7,250 10,490 4,990 5,890 8,830 11,160 3,480 5,550 8,170 3,830 5,320 7,020 8,600 10,180

7,030 9,660

7,580 10,680 14,350

Casing Strength

8,090 12,010 6,930 10,000 12,920 3,830 6,310 9,200 4,150 5,870 7,820 9,730 11,640

8,830 13,470 5,620 8,520 11,100 14,520 6,730 10,140 7,220 8,510 10,760 13,020

Casing OD (In.)

Weight (ppf)

H40

J/K 55

Burst Pressure (psi) C75 N80

C95

P110

H40

J/K 55

Collapse Pressure (psi) C75 N80

C95

P110

10

11

26.4 29.7 33.7 39.0 24.0 32.0 36.0 40.0 36.0 40.0 43.5 47.0 53.5 40.5 45.5 51.0 55.5 60.7 65.7 71.1 47.0 54.0 60.0

4,140 5,430 2,860 2,560 2,950 3,930 4,460 5,020 3,520 3,950 4,350 4,720 3,130 3,580 4,030 4,430 4,880 5,330 3,070 3,560 4,010

5,650 6,450 7,400 8,610 5,360 6,090 6,850 4,800 5,390 5,930 6,440 7,430 4,270 4,880 5,490 6,040 6,650 7,260 4,190 4,860 5,460

6,020 6,890 7,900 9,180 5,710 6,490 7,300 5,120 5,750 6,330 6,870 7,930 5,210 5,860 6,450 7,100 7,750

7,150 8,180 8,180 9,380 7,860 7,710 8,670 6,820 7,510 8,150 9,410 7,160 6,960 7,660 8,436 9,200 10,050 6,920

8,280 9,470 10,860 12,620 8,930 10,040 7,040 7,900 8,700 9,440 10,900 8,060 8,860 9,760 10,650 11,640 8,010 2,210 1,710

3,010 5,090 950 2,530 3,450 4,400 2,220 2,570 3,250 3,880 1,730 2,090 2,700 3,320 4,160 4,920 1,630 2,070 2,660

3,280 4,670 6,320 8,430 2,950 4,020 5,350 2,320 2,980 3,750 4,630 6,380 1,720 2,410 3,100 3,950 5,020 6,080 1,620 2,380 3,070

3,930 4,790 6,560 8,820 3,050 4,470 5,520 2,370 3,530 3,810 4,760 6,620 2,480 3,750 4,020 5,160 6,300

3,710 5,120 7,260 9,980 4,360 6,010 3,330 4,130 5,080 7,330 3,490 4,300 5,566 6,950 8,470 3,440

3,900 6,180 7,870 11,060 3,430 4,700 7,420 2,470 3,480 4,760 5,310 7,930 2,610 3,750 4,630 5,860 7,490 9,280 3,610

Casing Strength

2,280

1,420

41

5,830

3,680

Casing OD (In.)

Weight (ppf)

H40

J/K 55

Burst Pressure (psi) C75 N80

C95

P110

H40

J/K 55

Collapse Pressure (psi) C75 N80

42

C95

P110

13

16 18 20 24 26 30 36

48.0 54.5 61.0 68.0 72.0 77.0 85.0 65.0 75.0 84.0 109.0 87.5 106.0 94.0 106.5 133.0 156.0 202.0 310.0 374.0

1,730 2,730 3,090 3,450 3,700 1,640 2,630 2,980 3,950 2,110 2,740 2,110 2,410 3,060 1,910 2,120 2,450 2,040 7,890 3,980 4,220 4,710 5,040 5,400 5,970 5,470 4,500 5,020 5,380 5,760 6,360 5,970 6,390 8,750

770 1,140 1,540 1,950 2,230 670 1,010 1,410 2,560 520 1,140 520 770 1,500 3,470 1,660 2,220 2,590 2,990 3,810 1,670 2,270 2,880 3,100 3,870 2,330 2,820 4,490

7,400

2,880

Casing Strength

1,530 1,530 X-42 X-42 X-42 X-42

520 520 860 1,100 1,480 1,010

Casing Capacity

43

Casing OD Weight Casing ID Capacity Displacement (In.) (ppf) (In.) (bbl/ft) (bbl/ft)

9.5
4

4.090 4.000 3.920 3.826 4.560 4.494 4.408 4.276 5.012 4.950 4.892 4.778 4.670 6.049 5.921 5.791 6.456 6.366 6.276 6.184 6.094 6.004 6.969 6.875 6.765 6.624 8.098 7.921 7.825 7.725 8.921 8.835 8.755 8.681 8.535

0.0163 0.0155 0.0149 0.0142 0.0202 0.0196 0.0189 0.0178 0.0244 0.0238 0.0233 0.0222 0.0212 0.0355 0.0341 0.0326 0.0405 0.0394 0.0383 0.0372 0.0361 0.0350 0.0472 0.0459 0.0445 0.0426 0.0637 0.0610 0.0595 0.0580 0.0773 0.0758 0.0745 0.0732 0.0708

0.0035 0.0042 0.0049 0.0055 0.0042 0.0047 0.0055 0.0066 0.0051 0.0056 0.0062 0.0073 0.0084 0.0071 0.0087 0.0102 0.0073 0.0084 0.0095 0.0106 0.0116 0.0127 0.0096 0.0108 0.0123 0.0142 0.0086 0.0116 0.0131 0.0146 0.0131 0.0146 0.0158 0.0171 0.0195

11.6 13.5 15.1 11.5 13.0 15.0 18.0 14.0 15.5

17.0 20.0 23.0 20.0

24.0 28.0 20.0 23.0 26.0 29.0 32.0 35.0 26.4 29.7 33.7 39.0 24.0 32.0 36.0 40.0 36.0 40.0

43.5 47.0 53.5

44

Casing Capacity

Casing OD Weight Casing ID Capacity Displacement (In.) (ppf) (In.) (bbl/ft) (bbl/ft)

10

11

13

16

18

20 24 x 5/8" tin 30 x 1" tin 36 x 1" tin 48 x 1" tin

40.5 45.5 51.0 55.5 60.7 65.7 71.1 76.0 81.0 47.0 54.0 60.0 48.0 54.5 61.0 68.0 72.0 77.0 85.0 65.0 75.0 84.0 109.0 118.0 87.5 109.0 122.0 94.0 106.5 133.0 156.0 310.0 374.0 502.0

10.050 9.950 9.850 9.760 9.660 9.560 9.450 9.350 9.250 11.000 10.880 10.772 12.715 12.615 12.515 12.415 12.347 12.275 12.159 15.250 15.124 15.100 14.688 14.570 17.755 17.491 17.385 19.124 19.000 18.730 22.750 28.000 34.000 46.000

0.0981 0.0962 0.0943 0.0925 0.0907 0.0888 0.0868 0.0849 0.0831 0.1175 0.1150 0.1127 0.1571 0.1546 0.1522 0.1497 0.1481 0.1464 0.1436 0.2259 0.2222 0.2189 0.2096 0.2062 0.3062 0.2972 0.2936 0.3553 0.3507 0.3408 0.5028 0.7616 1.1230 2.0556

0.0147 0.0166 0.0186 0.0202 0.0216 0.0235 0.0255 0.0273 0.0291 0.0171 0.0197 0.0218 0.0175 0.0198 0.0219 0.0247 0.0262 0.0274 0.0302 0.0237 0.0273 0.0306 0.0391 0.0425 0.0307 0.0398 0.0434 0.0342 0.0388 0.0484 0.0568 0.1127 0.1360 0.1826

Note: To find casing weight for other wall thicknesses: Weight of Casinglb/ft = 10.68 x (Odin tin) x tin Where:
tin = Wall thickness (inches)

Hole Capacity
Hole Diameter (In.) Hole Capacity (bbl/ft) Hole Diameter (In.)

45
Hole Capacity (bbl/ft)

3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

0.0087 0.0119 0.0155 0.0197 0.0243 0.0294 0.0350 0.0410 0.0476 0.0546 0.0622 0.0702 0.0787 0.0877 0.0971 0.1071 0.1175 0.1285 0.1399 0.1518 0.1642 0.1770 0.1904 0.2042 0.2086 0.2334 0.2487 0.2645 0.2807 0.2975 0.3147 0.3325 0.3507 0.3694 0.3886 0.4082 0.4284 0.4490 0.4702 0.4918

23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 31 31 32 32 33 33 34 34 35 35 36 36 37 37 38 38 39 39 40 40 41 41 42 42

0.5139 0.5365 0.5595 0.5831 0.6071 0.6317 0.6567 0.6822 0.7082 0.7347 0.7616 0.7891 0.8170 0.8454 0.8743 0.9037 0.9336 0.9639 0.9948 1.0261 1.0579 1.0902 1.1230 1.1563 1.1900 1.2243 1.2590 1.2942 1.3299 1.3661 1.4028 1.4399 1.4776 1.5157 1.5543 1.5934 1.6330 1.6731 1.7136 1.7547

Liner Diameter 1" 1 " 1 " 1 " 1 " 2" 2 " 2 " 2 " 3" 3 " 3 " 3 "

2 0.0005 0.0204 0.0009 0.0386 0.0011 0.0459 0.0013 0.0539 0.0015 0.0625 0.0019 0.0816 0.0025 0.1033 0.0030 0.1276 0.0037 0.1544 0.0044 0.1837 0.0051 0.2156 0.0060 0.2500 0.0068 0.2870

2 0.0006 0.0255 0.0011 0.0482 0.0014 0.0574 0.0016 0.0674 0.0019 0.0781 0.0024 0.1021 0.0031 0.1292 0.0038 0.1595 0.0046 0.1930 0.0055 0.2296 0.0064 0.2695 0.0074 0.3126 0.0085 0.3588

3 0.0007 0.0306 0.0014 0.0579 0.0016 0.0689 0.0019 0.0809 0.0022 0.0938 0.0029 0.1225 0.0037 0.1550 0.0046 0.1914 0.0055 0.2315 0.0066 0.2756 0.0077 0.3234 0.0089 0.3751 0.0103 0.4306

4 0.0010 0.0408 0.0018 0.0772 0.0022 0.0919 0.0026 0.1078 0.0030 0.1250 0.0039 0.1633 0.0049 0.2067 0.0061 0.2552 0.0074 0.3087 0.0087 0.3674 0.0103 0.4312 0.0119 0.5001 0.0137 0.5741

5 0.0012 0.0510 0.0023 0.0965 0.0027 0.1148 0.0032 0.1348 0.0037 0.1563 0.0049 0.2041 0.0062 0.2583 0.0076 0.3189 0.0092 0.3859 0.0109 0.4593 0.0128 0.5390 0.0149 0.6251 0.0171 0.7176

6 0.0015 0.0612 0.0028 0.1158 0.0033 0.1378 0.0039 0.1617 0.0045 0.1875 0.0058 0.2449 0.0074 0.3100 0.0091 0.3827 0.0110 0.4631 0.0131 0.5511 0.0154 0.6468 0.0179 0.7501 0.0205 0.8611

STROKE LENGTH (INCHES) 7 7 8 0.0017 0.0018 0.0019 0.0714 0.0765 0.0816 0.0032 0.0034 0.0037 0.1351 0.1447 0.1544 0.0038 0.0041 0.0044 0.1607 0.1722 0.1837 0.0045 0.0048 0.0051 0.1887 0.2021 0.2156 0.0052 0.0056 0.0060 0.2188 0.2344 0.2500 0.0068 0.0073 0.0078 0.2858 0.3062 0.3266 0.0086 0.0092 0.0098 0.3617 0.3875 0.4133 0.0106 0.0114 0.0122 0.4465 0.4784 0.5103 0.0129 0.0138 0.0147 0.5403 0.5789 0.6175 0.0153 0.0164 0.0175 0.6430 0.6889 0.7348 0.0180 0.0193 0.0205 0.7546 0.8085 0.8624 0.0208 0.0223 0.0238 0.8752 0.9377 1.0002 0.0239 0.0256 0.0273 1.0047 1.0764 1.1482

46 Triplex Pumps 100% Efficiency

8 0.0021 0.0868 0.0039 0.1640 0.0046 0.1952 0.0055 0.2291 0.0063 0.2657 0.0083 0.3470 0.0105 0.4392 0.0129 0.5422 0.0156 0.6561 0.0186 0.7808 0.0218 0.9163 0.0253 1.0627 0.0290 1.2199

9 0.0022 0.0919 0.0041 0.1737 0.0049 0.2067 0.0058 0.2426 0.0067 0.2813 0.0087 0.3674 0.0111 0.4650 0.0137 0.5741 0.0165 0.6946 0.0197 0.8267 0.0231 0.9702 0.0268 1.1252 0.0308 1.2917

9 0.0023 0.0970 0.0044 0.1833 0.0052 0.2182 0.0061 0.2560 0.0071 0.2969 0.0092 0.3878 0.0117 0.4908 0.0144 0.6060 0.0175 0.7332 0.0208 0.8726 0.0244 1.0241 0.0283 1.1877 0.0325 1.3635

10 0.0024 0.1021 0.0046 0.1930 0.0055 0.2296 0.0064 0.2695 0.0074 0.3126 0.0097 0.4082 0.0123 0.5167 0.0152 0.6379 0.0184 0.7718 0.0219 0.9185 0.0257 1.0780 0.0298 1.2502 0.0342 1.4352

11 0.0027 0.1123 0.0051 0.2123 0.0060 0.2526 0.0071 0.2965 0.0082 0.3438 0.0107 0.4491 0.0135 0.5683 0.0167 0.7017 0.0202 0.8490 0.0241 1.0104 0.0282 1.1858 0.0327 1.3753 0.0376 1.5787

12 0.0029 0.1225 0.0055 0.2315 0.0066 0.2756 0.0077 0.3234 0.0089 0.3751 0.0117 0.4899 0.0148 0.6200 0.0182 0.7655 0.0221 0.9262 0.0262 1.1022 0.0308 1.2936 0.0357 1.5003 0.0410 1.7223

Units BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK

Liner Diameter 4" 4 " 4 " 4 " 5" 5 " 5 " 5 " 6" 6 " 6 " 6 " 7"

2 0.0078 0.3266 0.0088 0.3687 0.0098 0.4133 0.0110 0.4605 0.0122 0.5103 0.0134 0.5626 0.0147 0.6175 0.0161 0.6749 0.0175 0.7348 0.0190 0.7973 0.0205 0.8624 0.0221 0.9300 0.0238 1.0002

2 0.0097 0.4082 0.0110 0.4609 0.0123 0.5167 0.0137 0.5757 0.0152 0.6379 0.0167 0.7033 0.0184 0.7718 0.0201 0.8436 0.0219 0.9185 0.0237 0.9967 0.0257 1.0780 0.0277 1.1625 0.0298 1.2502

3 0.0117 0.4899 0.0132 0.5530 0.0148 0.6200 0.0164 0.6908 0.0182 0.7655 0.0201 0.8439 0.0221 0.9262 0.0241 1.0123 0.0262 1.1022 0.0285 1.1960 0.0308 1.2936 0.0332 1.3950 0.0357 1.5003

4 0.0156 0.6532 0.0176 0.7374 0.0197 0.8267 0.0219 0.9211 0.0243 1.0206 0.0268 1.1252 0.0294 1.2349 0.0321 1.3497 0.0350 1.4697 0.0380 1.5947 0.0411 1.7248 0.0443 1.8600 0.0476 2.0004

5 0.0194 0.8165 0.0219 0.9217 0.0246 1.0334 0.0274 1.1514 0.0304 1.2758 0.0335 1.4065 0.0368 1.5437 0.0402 1.6872 0.0437 1.8372 0.0475 1.9934 0.0513 2.1560 0.0554 2.3251 0.0595 2.5005

6 0.0233 0.9798 0.0263 1.1061 0.0295 1.2400 0.0329 1.3816 0.0365 1.5309 0.0402 1.6878 0.0441 1.8524 0.0482 2.0246 0.0525 2.2045 0.0570 2.3920 0.0616 2.5872 0.0664 2.7901 0.0714 3.0006

STROKE LENGTH (INCHES) 7 7 8 0.0272 0.0292 0.0311 1.1431 1.2247 1.3064 0.0307 0.0329 0.0351 1.2907 1.3826 1.4748 0.0344 0.0369 0.0394 1.4467 1.5500 1.6534 0.0384 0.0411 0.0439 1.6119 1.7270 1.8422 0.0425 0.0456 0.0486 1.7861 1.9136 2.0412 0.0469 0.0502 0.0536 1.9691 2.1098 2.2504 0.0515 0.0551 0.0588 2.1611 2.3155 2.4699 0.0562 0.0603 0.0643 2.3621 2.5308 2.6995 0.0612 0.0656 0.0700 2.5719 2.7556 2.9393 0.0664 0.0712 0.0759 2.7907 2.9900 3.1894 0.0719 0.0770 0.0821 3.0184 3.2340 3.4496 0.0775 0.0830 0.0886 3.2551 3.4876 3.7201 0.0833 0.0893 0.0953 3.5007 3.7507 4.008

8 0.0330 1.3880 0.0373 1.5669 0.0418 1.7567 0.0466 1.9573 0.0516 2.1688 0.0569 2.3911 0.0625 2.6242 0.0683 2.8682 0.0744 3.1230 0.0807 3.3887 0.0873 3.6652 0.0941 3.9526 0.1012 4.2508

9 0.0350 1.4697 0.0395 1.6591 0.0443 1.8600 0.0493 2.0725 0.0547 2.2964 0.0603 2.5317 0.0662 2.7786 0.0723 3.0369 0.0787 3.3067 0.0854 3.5880 0.0924 3.8808 0.0996 4.1851 0.1072 4.5008

9 0.0369 1.5513 0.0417 1.7513 0.0467 1.9634 0.0521 2.1876 0.0577 2.4239 0.0636 2.6724 0.0698 2.9329 0.0763 3.2056 0.0831 3.4905 0.0902 3.7874 0.0975 4.0964 0.1052 4.4176 0.1131 4.7509

10 0.0389 1.6330 0.0439 1.8435 0.0492 2.0667 0.0548 2.3027 0.0608 2.5515 0.0670 2.8130 0.0735 3.0873 0.0803 3.3744 0.0875 3.6742 0.0949 3.9867 0.1027 4.3120 0.1107 4.6501 0.1191 5.0009

11 0.0428 1.7963 0.0483 2.0278 0.0541 2.2734 0.0603 2.5330 0.0668 2.8067 0.0737 3.0943 0.0809 3.3960 0.0884 3.7118 0.0962 4.0416 0.1044 4.3854 0.1129 4.7432 0.1218 5.1151 0.1310 5.5010

12 0.0467 1.9596 0.0527 2.2122 0.0590 2.4801 0.0658 2.7633 0.0729 3.0618 0.0804 3.3756 0.0882 3.7048 0.0964 4.0492 0.1050 4.4090 0.1139 4.7841 0.1232 5.1744 0.1329 5.5801 0.1429 6.0011

Units BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK BBLS/STK Gal/STK

Triplex Pumps 100% Efficiency 47

48
Mud Weight Adjustments

Initial DESIRED MUD WEIGHT (PPG) Mud Wt 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 (ppg) 59 90 123 156 29 192 229 268 308 350 395 442 490 542 596 653 714 778 9.0 29 60 92 125 160 196 234 273 315 359 405 452 503 557 612 672 735 9.5 30 61 93 43 128 164 201 239 280 323 368 414 464 516 571 630 691 10.0 30 31 62 85 96 131 167 205 245 287 331 376 426 479 531 588 648 10.5 60 23 31 128 64 98 134 171 210 251 294 339 387 437 490 546 605 11.0 90 46 19 171 32 66 101 137 175 215 258 301 348 397 449 504 562 11.5 120 69 37 16 214 33 67 103 140 179 221 263 310 357 408 462 518 12.0 150 92 56 32 256 14 34 68 105 144 184 226 271 318 367 420 475 12.5 180 115 75 48 299 27 12 34 70 108 147 188 232 278 327 378 432 13.0 210 138 94 63 342 41 24 11 35 72 111 150 194 238 286 336 389 13.5 240 161 112 76 385 54 36 21 10 36 74 113 155 199 245 294 345 14.0 270 185 131 95 427 68 48 32 19 9 37 75 116 159 204 252 302 14.5 300 208 150 110 470 82 60 43 29 18 8 37 77 119 163 210 259 15.0 330 231 169 126 513 95 72 54 39 26 16 8 39 79 122 168 216 15.5 360 254 187 142 556 109 84 64 48 35 24 15 7 40 81 126 172 16.0 390 277 206 158 598 123 96 75 58 44 32 23 14 7 41 84 129 16.5 420 300 225 174 641 136 108 86 68 53 40 30 21 13 6 42 86 17.0 450 323 244 189 684 150 120 96 77 62 49 38 28 20 12 6 43 17.5 480 346 262 205 726 163 132 107 87 71 57 45 35 26 18 12 5 18.0 Dilution or Cut Back: The gray section of the chart shows the number of barrels of Mud Weight Increase: The yellow section of the chart indicates the number water which must be added to 100 bbls of mud to produce the desired weight of 100 lb sacks of barite which must be added to 100 bbls of mud to reduction. produce desired weight increases.

Mud Weights
lb/gal lb/ft3 kg/m 3 Specific Gravity Gradient Depth (psi/ft)

49
Gradient Depth (kPa/m)

8.34 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0 12.1 12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9 13.0 13.1 13.2

62.38 63.58 64.32 65.07 65.82 66.57 67.31 68.06 68.81 69.56 70.31 71.05 71.80 72.55 73.30 74.05 74.79 75.54 76.29 77.04 77.79 78.53 79.28 80.03 80.78 81.53 82.27 83.02 83.77 84.52 85.27 86.01 86.76 87.51 88.26 89.01 89.75 90.50 91.25 92.00 92.74 93.49 94.24 94.99 95.74 96.48 97.23 97.98 98.73

999.3 1018.5 1030.5 1042.4 1054.4 1066.4 1078.4 1090.4 1102.3 1114.3 1126.3 1138.3 1150.3 1162.3 1174.2 1186.2 1198.2 1210.2 1222.2 1234.2 1246.1 1258.1 1270.1 1282.1 1294.1 1306.0 1318.0 1330.0 1342.0 1354.0 1366.0 1377.9 1389.9 1401.9 1413.9 1425.9 1437.8 1449.8 1461.8 1473.8 1485.8 1497.8 1509.7 1521.7 1533.7 1545.7 1557.7 1569.6 1581.6

1.00 1.02 1.03 1.04 1.05 1.07 1.08 1.09 1.10 1.12 1.13 1.14 1.15 1.16 1.18 1.19 1.20 1.21 1.22 1.24 1.25 1.26 1.27 1.28 1.29 1.31 1.32 1.33 1.34 1.36 1.37 1.38 1.39 1.40 1.41 1.43 1.44 1.45 1.46 1.48 1.49 1.50 1.51 1.52 1.53 1.55 1.56 1.57 1.58

0.434 0.442 0.447 0.452 0.458 0.463 0.468 0.473 0.478 0.484 0.489 0.494 0.499 0.504 0.510 0.515 0.520 0.525 0.530 0.536 0.541 0.546 0.551 0.556 0.562 0.567 0.572 0.577 0.582 0.588 0.593 0.598 0.603 0.608 0.614 0.619 0.624 0.629 0.634 0.640 0.645 0.650 0.655 0.660 0.666 0.671 0.676 0.681 0.686

9.8 10.0 10.1 10.2 10.4 10.5 10.6 10.7 10.8 10.9 11.1 11.2 11.3 11.4 11.5 11.6 11.8 11.9 12.0 12.1 12.2 12.4 12.5 12.6 12.7 12.8 12.9 13.1 13.2 13.3 13.4 13.5 13.6 13.8 13.9 14.0 14.1 14.2 14.4 14.5 14.6 14.7 14.8 14.9 15.1 15.2 15.3 15.4 15.5

50
lb/gal lb/ft3

Mud Weights
kg/m 3 Specific Gravity Gradient Depth (psi/ft) Gradient Depth (kPa/m)

13.3 13.4 13.5 13.6 13.7 13.8 13.9 14.0 14.1 14.2 14.3 14.4 14.5 14.6 14.7 14.8 14.9 15.0 15.1 15.2 15.3 15.4 15.5 15.6 15.7 15.8 15.9 16.0 16.1 16.2 16.3 16.4 16.5 16.6 16.7 16.8 16.9 17.0 17.1 17.2 17.3 17.4 17.5 17.6 17.7 17.8 17.9 18.0 18.1

99.48 100.22 100.97 101.72 102.47 103.22 103.96 104.71 105.46 106.21 106.96 107.70 108.45 109.20 109.95 110.70 111.44 112.19 112.94 113.69 114.44 115.18 115.93 116.68 117.43 118.18 118.92 119.67 120.42 121.17 121.91 122.66 123.41 124.16 124.91 125.65 126.40 127.15 127.90 128.65 129.39 130.14 130.89 131.64 132.39 133.13 133.88 134.63 135.38

1593.6 1605.6 1617.6 1629.6 1641.5 1653.5 1665.5 1677.5 1689.5 1701.5 1713.4 1725.4 1737.4 1749.4 1761.4 1773.3 1785.3 1797.3 1809.3 1821.3 1833.3 1845.2 1857.2 1869.2 1881.2 1893.2 1905.1 1917.1 1929.1 1941.1 1953.1 1965.1 1977.0 1989.0 2001.0 2013.0 2025.0 2036.9 2048.9 2060.9 2072.9 2084.9 2096.9 2108.8 2120.8 2132.8 2144.8 2156.8 2168.8

1.60 1.61 1.62 1.63 1.64 1.65 1.67 1.68 1.69 1.70 1.72 1.73 1.74 1.75 1.76 1.78 1.79 1.80 1.81 1.82 1.84 1.85 1.86 1.87 1.88 1.90 1.91 1.92 1.93 1.94 1.96 1.97 1.98 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.08 2.09 2.10 2.11 2.12 2.14 2.15 2.16 2.17

0.692 0.697 0.702 0.707 0.712 0.718 0.723 0.728 0.733 0.738 0.744 0.749 0.754 0.759 0.764 0.770 0.775 0.780 0.785 0.790 0.796 0.801 0.806 0.811 0.816 0.822 0.827 0.832 0.837 0.842 0.846 0.853 0.858 0.863 0.868 0.874 0.879 0.884 0.889 0.894 0.900 0.905 0.910 0.915 0.920 0.926 0.931 0.936 0.941

15.6 15.8 15.9 16.0 16.1 16.2 16.4 16.5 16.6 16.7 16.8 16.9 17.1 17.2 17.3 17.4 17.5 17.6 17.8 17.9 18.0 18.1 18.2 18.3 18.5 18.6 18.7 18.8 18.9 19.1 19.2 19.3 19.4 19.5 19.6 19.8 19.9 20.0 20.1 20.2 20.3 20.5 20.6 20.7 20.8 20.9 21.1 21.2 21.3

Mud Weights
lb/gal lb/ft3 kg/m 3 Specific Gravity Gradient Depth (psi/ft)

51
Gradient Depth (kPa/m)

18.2 18.3 18.4 18.5 18.6 18.7 18.8 18.9 19.0 19.1 19.2 19.3 19.4 19.5 19.6 19.7 19.8 19.9 20.0

136.13 136.87 137.62 138.37 139.12 139.87 140.61 141.36 142.11 142.86 143.61 144.35 145.10 145.85 146.60 147.34 148.09 148.84 149.59

2180.7 2192.7 2204.7 2216.7 2228.7 2240.6 2252.6 2264.6 2276.6 2288.6 2300.6 2312.5 2324.5 2336.5 2348.5 2360.5 2372.4 2384.4 2396.4

2.18 2.20 2.21 2.22 2.23 2.24 2.26 2.27 2.28 2.29 2.30 2.32 2.33 2.34 2.35 2.36 2.38 2.39 2.40

0.946 0.952 0.957 0.962 0.967 0.972 0.978 0.983 0.988 0.993 0.998 1.004 1.009 1.014 1.019 1.024 1.030 1.035 1.040

21.4 21.5 21.6 21.8 21.9 22.0 22.1 22.2 22.3 22.5 22.6 22.7 22.8 22.9 23.1 23.2 23.3 23.4 23.5

Specifications for BOP Flanges, Ring Gaskets, and Flange Bolts & Nuts
Stack Rating Approved Flanges Approved Ring Gaskets Bolt Spec. Nut Spec.

2000 psi and 3000 psi

API type 6B with type R flat API Type RX Bottom Groove API Type 6B with Type R Flat API Type RX or Bottom groove 5000 psi API Type BX or API Type 6BX with with Type Type BX Groove 6BX Flange 10,000 psi API Type 6BX with API Type BX Type BX Groove
Torque (Ft-Lb)

ASTM Grade B-7 ASTM Grade B-7 ASTM Grade B-7

ASTM Grade 2-H ASTM Grade 2-H ASTM Grade 2-H

Bolt Size (In.)

- 10 UNC - 9 UNC 1 - 8 UNC 1 - 8 UN 1 - 8 UN 1 - 8 UN 1 - 8 UN 1 - 8 UN

200 325 475 600 1400 1700 2040 3220

NOTE: Acceptable flange ring gasket material for sweet oil applications is low-carbon steel and for sour oil or gas is type 316 stainless or type 304 stainless steel. ASTM A193 Grade B/M with a maximum Rockwell Hardness of 22 may be acceptable but should be derated as per Table 1.4B of API Spec 6A. Specifications as per API Spec 6A "Wellhead Equipment".

52

Gate Valve Data Size, Working Pressure and Number of Turns to Operate
Cameron W-K-M
W-K-M valves have a unique wedge shaped handwheel. Operate W-K-M valves full open or full close, then jam tight.
3,000/5,000 psi WP

Cameron valves have a round handwheel with the name Cameron embossed on it. Operate Cameron Valves full open or full close, then back off turn.
3,000/5,000 psi WP

Model F, FC & FL

Inches 2 1/16 2 9/16 3 1/8 4 1/16 1 13/16 2 1/16 2 9/16 3 1/16 4 1/16 1 13/16 2 1/16 2 9/16 3 1/16 4 1/16 1 13/16 2 1/16 2 9/16 3 1/16 4 1/16 1 13/16 2 1/16 2 9/16 3 1/16 4 1/16

Turns 12 1/2 15 1/4 18 1/4 23 1/2 12 1/2 12 1/2 15 1/4 18 1/4 23 1/2 12 1/2 12 1/2 15 3/4 22 7/8 29 1/2 12 1/2 12 1/2 15 3/4 15 1/4 29 1/2 12 12 17 1/4 21 1/2 23 15 3/4 15 3/4 19 1/2 135
Torque Multiplier

Model M

Inches 2 1/16 2 9/16 3 1/8 4 1/16 1 13/16 2 1/16 2 9/16 3 1/16 4 1/16
20,000 psi WP

Turns 13 16 20 25 14 12 15 17 1/2 23 15 16 1/2 19 1/2 23 29

10,000 psi WP

10,000 - 15,000 psi WP

FC, FL & FLS

M-1 & M-2

15,000 20,000 psi WP

FLS

M-3

1 13/16 2 1/16 2 9/16 3 1/16 4 1/16

15,000 20,000 psi WP

F, FC & FL

10,000 psi WP

J & JS

15,000 psi WP

J &JS

1 13/16 2 1/16 2 9/16 3 1/16 1 13/16 2 1/16 2 9/16 3 1/16

20,000 psi WP

J & JS

15 3/4 15 3/4 117 135

Torque Multiplier Torque Multiplier

Gate Valve Data Size, Working Pressure and Number of Turns to Operate
Ingram Cactus Ingram Cactus valves have a round handwheel with three spokes and the name Ingram Cactus embossed on it. Operate Ingram Cactus valves Model 205 and 215 full open or full close, then jam tight. Operate Model 405 and 315 full open or full close, then back off turn.
2,000/5,000 psi WP

53

McEvoy McEvoy valves have a round handwheel with the name McEvoy embossed on it. Operate McEvoy valves full open or full close, then back off turn.

2,000/3,000/5,000 psi WP

Model 205

Inches 2 1/16 2 9/16 3 1/8 4 1/16 2 1/16 2 9/16 3 1/8 4 1/16

Turns 13 16 20 25 16 19 23 24 1/2

Model C

Inches 2 1/16 2 9/16 3 1/8 4 1/16

10,000 psi WP

Turns 13 16 18 17 11 13 10 1/2 12 1/2 17 11 9 10 1/2 26 --11 9 10 1/2 12 3/4 17 1/8 7 3/4 9 10 1/2 12 3/4 17 1/8

2,000/5,000 psi WP

405

1 13/16 2 1/16 2 9/16 3 1/16 4 1/16

15,000 psi WP

10,000 15,000 psi WP

215

1 13/16 2 1/16 2 9/16 3 1/16 4 1/16 1 13/16 2 1/16 2 9/16 3 1/16 4 1/16

14 12 15 17 1/2 23 16 18 17 24 21

1 13/16 2 1/16 2 9/16 3 1/16 4 1/16

10,000 psi WP

10,000 15,000 psi WP

315

E-2

1 13/16 2 1/16 2 9/16 3 1/16 4 1/16

15,000 psi WP

E-2

1 13/16 2 1/16 2 9/16 3 1/16 4 1/16

54

Nominal Flange Size (In.)

Standard Energized Ring Old API Series Service Through Number Rating (psi) Ring Gasket Number Designation Bore ID (In.) of Bolts Number

Bolt Size (In.)

Bolt Circle (In.)

Flange Flange Diameter (In.) Thickness (In.)

1 13/16

2 1/16

2 9/16

3 1/16

10M 15M 20M 2M 5M 10M 15M 20M 2M 5M 10M 15M 20M 10M 15M 20M 2M 3M 5M

R23 R24

R26 R27

R31 R31 R35

BX151 BX151 BX151 RX23 RX24 BX152 BX152 BX152 RX26 RX27 BX153 BX153 BX153 BX154 BX154 BX154 RX31 RX31 RX35

2" 600 2" 1,500

2 " 600 2 " 1,500

3" 600 3" 900 3" 1,500

1 13/16 1 13/16 1 13/16 2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 9/16 2 9/16 2 9/16 2 9/16 2 9/16 3 1/16 3 1/16 3 1/16 3 3 3

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

1 1 1 7/ 8 1 1 1 1 1 1

5 6 5/16 8 5 6 6 6 9 1/16 5 7 7 7 10 5/16 8 9 1/16 11 5/16 6 7 8

7 8 3/16 10 6 8 7 8 11 5/16 7 9 9 10 12 13/16 10 11 5/16 14 1/16 8 9 10

1 21/32 1 25/32 2 1 5/16 1 13/16 1 47/64 2 2 13/16 1 7/16 1 15/16 2 1/64 2 3 2 19/64 2 17/32 3 1 9/16 1 13/16 2 3/16

API Ring Joint Flanges

Nominal Flange Size (In.)

Standard Energized Ring Old API Series Service Through Number Rating (psi) Ring Gasket Number Designation Bore ID (In.) of Bolts Number

Bolt Size (In.)

Bolt Circle (In.)

Flange Flange Diameter (In.) Thickness (In.)

4 1/16

7 1/16

2M 3M 5M 10M 15M 20M 2M 3M 5M 10M 2M 3M 5M 10M 15M 20M 2M 3M 5M 10M 15M

R37 R37 R39

R41 R41 R44 R45 R45 R46

R49 R49 R50

RX37 RX37 RX39 BX155 BX155 BX155 RX41 RX41 RX44 BX169 RX45 RX45 RX46 BX156 BX156 BX156 RX49 RX49 RX50 BX157 BX157

4" 600 4" 900 4" 1,500

6" 600 6" 900 6" 1,500

8" 600 8" 900 8" 1,500

4 1/16 4 1/16 4 1/16 4 1/16 4 1/16 4 1/16 5 5 5 5 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 9 9 9 9 9

8 8 8 8 8 8 8 8 8 12 12 12 12 12 16 16 12 12 12 16 16

1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1

8 9 9 10 3/16 11 7/16 14 1/16 10 11 11 11 13/16 11 12 12 15 16 21 13/16 13 15 15 18 21

10 11 12 12 7/16 14 3/16 17 9/16 13 13 14 14 1/16 14 15 15 18 19 25 13/16 16 18 19 21 25

1 13/16 2 1/16 2 7/16 2 49/64 3 3/32 4 3/16 2 1/16 2 5/16 3 3/16 3 2 3/16 2 3 4 1/16 4 11/16 6 2 2 13/16 4 1/16 4 5

API Ring Joint Flanges 55

Nominal Flange Size (In.)

Standard Energized Ring Old API Series Service Through Number Rating (psi) Ring Gasket Number Designation Bore ID (In.) of Bolts Number

56

Bolt Size (In.)

Bolt Circle (In.)

Flange Flange Diameter (In.) Thickness (In.)

11

13

16 18 20 21 21 21 26

2M 3M 5M 10M 15M 2M 3M 5M 10M 15M 2M 3M 5M 10M 5M 10M 3M 2M 5M 10M 2M 3M

R53 R53 R54 R57 R57

R65 R66

R74 R73

RX53 RX53 RX54 BX158 BX158 RX57 RX57 BX160 BX159 BX159 RX65 RX66 BX162 BX162 BX163 BX164 RX74 RX73 BX165 BX166 BX167 BX168

10" 600 10" 900 10" 1,500 12" 600 12" 900

16" 600 16" 900

20" 900 20" 600

11 11 11 11 11 13 13 13 13 13 16 16 16 16 18 18 20 21 21 21 26 26

16 16 12 16 20 20 20 16 20 20 20 20 16 24 20 24 20 24 24 24 20 24

1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 2 2 1 2 2 1 2

17 18 19 22 28 19 21 23 26 30 23 24 26 30 9/16 31 36 7/16 29 28 34 40 37 39

20 21 23 25 32 22 24 26 30 34 27 27 30 34 5/16 35 40 15/16 33 32 39 45 41 43

2 13/16 3 1/16 4 11/16 5 9/16 7 2 15/16 3 7/16 4 7/16 6 7 3 5/16 3 15/16 5 6 6 17/32 8 25/32 4 3 7 9 4 31/32 6 11/32

API Ring Joint Flanges

BOP Fluid Operating Volumes

Cameron BOPs
Cameron Type 'D' Annular Preventer
BOP Nom. Size (In.) Working Pressure (psi) Fluid to Close (gal)

57

Fluid to Open (gal)

7 1/16 11 13

5,000 10,000 5,000 10,000 5,000 10,000

1.69 2.94 5.65 10.15 12.12 18.10

1.39 2.55 4.69 9.06 10.34 16.15

Cameron Type 'U' Ram Preventer

BOP Nom. Size (In.) Working Pressure (psi) Fluid to Close (gal) Fluid to Open (gal)

6 7 1/16 10 11 12 13 16 18 20 21 26

3,000 5,000 10,000 15,000 3,000 5,000 5,000 - 10,000 15,000 3,000 5,000 10,000 15,000 3,000 5,000 10,000 3,000 5,000 10,000 2,000 3,000

1.33 1.33 1.33 1.33 3.36 3.36 3.36 6.2 5.80 5.80 5.80 11.30 9.80 9.80 23.00 8.40 20.40 26.50 10.40 10.40

1.28 1.28 1.28 1.28 3.20 3.20 3.20 6.1 5.45 5.45 5.45 11.70 10.60 10.60 24.90 7.85 17.80 24.10 9.85 9.85

Cameron Type 'QRC' Ram Preventer

BOP Nom. Size (In.) Working Pressure (psi) Fluid to Close (gal) Fluid to Open (gal)

57

6 8 10 12 16 18

3,000 5,000 3,000 5,000 3,000 5,000 3,000 2,000 2,000

0.81 0.81 2.36 2.36 2.77 2.77 4.42 6.00 6.00

0.95 0.95 2.70 2.70 3.18 3.18 5.10 7.05 7.05

58

BOP Fluid Operating Volumes

Cameron Hydraulic Gate Valves
BOP Nom. Fluid to Fluid to Working Size (In.) Pressure (psi) Close (gal) Open (gal)

OEM

Type

Cameron Cameron Cameron Cameron Cameron Cameron Cameron Cameron Cameron

HCR HCR HCR HCR F F F F F

4 4 6 6 4 4 4 6 6

3,000 5,000 3,000 5,000 3,000 5,000 10,000 3,000 5,000

0.52 0.52 1.95 1.95 0.30 0.30 0.59 0.84 0.84

0.61 0.61 2.25 2.25 0.30 0.30 0.59 0.84 0.84

Shaffer BOPs
Shaffer Spherical Annular Preventers
BOP Nom. Working Size (In.) Pressure (psi) Cover Type Fluid to Fluid to Close (gal) Open (gal)

7 1/16 9 11

13 16 18 21

3,000 5,000 10,000 3,000 5,000 3,000 5,000 10,000 3,000 5,000 10,000 5,000 5,000 2,000 5,000

Bolted Bolted Bolted Bolted Bolted Bolted Bolted Wedge Bolted Bolt/Wedge Wedge Wedge Wedge Bolted Wedged

4.57 4.57 17.11 7.23 11.05 11.00 18.67 30.58 23.50 23.58 40.16 33.26 48.16 32.59 61.37

3.21 3.21 13.95 5.03 8.72 6.78 14.59 24.67 14.67 17.41 32.64 25.61 37.61 16.92 47.76

Shaffer Type 'LWS' Ram Preventers

BOP Nom. Working Piston Size Size (In.) Pressure (psi) (In.) Fluid to Close (gal) Fluid to Open (gal)

7 1/16 9 11 20

21

5,000 15,000 5,000 3,000 5,000 3,000 3,000 3,000 3,000 2,000 2,000

6 14 8 6 8 8 10 14 8 10 14

1.00 4.77 2.18 1.55 2.64 4.91 7.80 14.50 5.07 7.80 14.50

0.83 4.43 1.90 1.29 2.32 4.31 6.86 13.59 4.46 6.86 13.50

BOP Fluid Operating Volumes

Shaffer Type 'SL' Ram Preventers
BOP Nom. Working Piston Size Fluid to Size (In.) Pressure (psi) (In.) Close (gal)

59

Fluid to Open (gal)

7 1/16 11

13

16 18 21

15,000 15,000 10,000 15,000 3,000 5,000 5,000 10,000 15,000 5,000 5,000 10,000 10,000 10,000

10 14 14 14 10 10 14 14 14 10 14 14 14 14

2.72 6.00 9.45 2.72 5.44 5.44 11.00 10.58 11.56 11.76 10.67 14.47 14.55 16.05

2.34 5.57 7.00 2.34 4.46 4.46 10.52 10.52 10.52 5.44 4.46 12.5 13.21 13.86

Shaffer Hydraulic Gate Valves

OEM Type BOP Nom. Fluid to Fluid to Working Size (In.) Pressure (psi) Close (gal) Open (gal)

Shaffer Shaffer Shaffer Shaffer Shaffer Shaffer Shaffer

2 1/16 3 1/16 3 1/16 3 1/16 4 1/16 4 1/16 4 1/16

10,000 5,000 10,000 15,000 5,000 10000 15000

0.15 0.20 0.40 0.35 0.35 0.45 0.45

0.20 0.25 0.35 0.40 0.40 0.50 0.50

Hydril BOPs
Hydril Type 'GK' Annular Preventer
BOP Nom. Size (In.) Working Pressure (psi) Fluid to Close (gal) Fluid to Open (gal)

59

7 1/16

11

13

16

3,000 5,000 10,000 15,000 20,000 3,000 5,000 3,000 5,000 10,000 15,000 3,000 5,000 10,000 2,000 3,000 5,000

2.85 3.86 9.42 11.20 10.90 4.33 6.84 7.43 9.81 25.10 26.67 11.36 17.98 34.53 17.42 21.02 28.70

2.24 3.30 7.08 7.50 7.20 3.41 5.80 5.54 7.97 18.87 20.45 8.94 14.15 24.66 12.53 15.80 19.93

60
BOP Nom. Size (In.)

BOP Fluid Operating Volumes

Hydril Type 'MSP' Annular Preventer
Working Pressure (psi) Fluid to Close (gal) Fluid to Open (gal)

7 1/16 9 11 20 21 29 30

2,000 2.85 1.98 2,000 4.57 2.95 2,000 7.43 5.23 2,000 31.05 18.93 2,000 31.05 18.93 500 60.00 n/a 1,000 87.60 27.80 Hydril Type 'GX' Annular Preventer 18 10,000 58.00 58.00 Hydril MPL (Multi Position Lock) Ram Preventers 18 10,000 17.1 15.6 18 15,000 19.4 16.7
Hydril Type 'GL' Annular Preventer

BOP Nom. Size (In.)

Working Fluid to Pressure (psi) Close (gal)

Fluid to Open (gal)

Secondary Fluid (gal)

13 16 18 21

5,000 5,000 5,000 5,000

19.76 33.80 44.00 58.00

19.76 33.80 44.00 58.00

8.24 17.30 20.00 29.50

Hydril Manual Lock Ram Preventers

BOP Nom. Size (In.) Working Pressure (psi) Type Fluid to Close (gal) Fluid to Open (gal)

7 1/16

9 11

13 16 18 20 21

3,000 5,000 10,000 15,000 3,000 5,000 3,000 5,000 10,000 3,000 5,000 10,000 10,000 10,000 3,000 2,000

V V X X V V V V X V V X X X V V

1.30 1.30 1.90 3.70 1.90 1.90 3.10 3.10 11.80 5.40 5.40 11.80 15.00 16.40 8.10 8.10

1.20 1.20 1.80 3.40 1.90 1.90 3.10 3.10 11.80 4.90 4.90 11.80 14.10 15.60 7.20 7.20

Coiled Tubing Data

Coiled Tubing Stretch Table
Size (In) OD Wall Thickness (In) Cross Sectional Area (Sq In)

61

Free Point Constant

.087 .095 .102 1.250 .109 .125 .134 .156 .095 .102 1.500 .109 .125 .134 .156 .109 .125 1.750 .134 .156 .175 .109 .125 2.0 .134 .156 .175 .125 .134 2.375 .156 .175 .190

.304 .328 .351 .374 .420 .451 .512 .399 .428 .456 .512 .552 .629 .538 .605 .652 .745 .831 .619 .698 .753 .861 .962 .837 .904 1.035 1.158 1.241

760.0 820.0 877.5 935.0 1050.0 1127.5 1280.0 997.5 1070.0 1140.0 1280.0 1380.0 1572.5 1345.0 1512.5 1630.0 1862.5 2077.5 1547.5 1745.0 1882.5 2152.5 2405.0 2092.5 2260.0 2587.5 2895.5 3102.5

61

OD

Wall

ID

Specified Specified Calculated

Nom. Wt lbs/ft

Internal Capacity/ft Gallons bbls

Displacement of Steel/ft Gallons bbls

External Displacement/ft Gallons bbls

OD

Wall

ID

Specified Specified Calculated

Nom Wt Internal Capacity lbs/ft Gallons bbls

Displacement Of Steel Gallons bbls

External Displacement Gallons bbls

62

1.00 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.50 1.50 1.50

.080 .087 .095 .102 .109 .080 .087 .095 .102 .109 .116 .125 .134 .145 .156 .175 .095 .102 .109

.840 .826 .810 .796 .782 1.090 1.076 1.060 1.046 1.032 1.018 1.000 .982 .960 .938 .900 1.310 1.296 1.282

.788 .850 .920 .981 1.040 1.002 1.083 1.175 1.254 1.332 1.408 1.506 1.601 1.715 1.827 2.014 1.429 1.527 1.623

.02879 .02784 .02677 .02585 .02495 .04847 .04724 .04584 .04464 .04345 .04228 .04080 .03934 .03760 .03590 .03305 .07002 .06853 .06706

.000685 .000663 .000637 .000616 .000594 .001154 .001125 .001091 .001063 .001035 .001007 .000971 .000937 .000895 .000855 .000787 .001667 .001632 .001597

.01201 .01296 .01403 .01495 .01585 .01528 .01651 .01791 .01911 .02030 .02147 .02295 .02441 .02615 .02785 .03070 .02178 .02327 .02474

.00029 .00031 .00033 .00036 .00038 .00036 .00039 .00043 .00046 .00048 .00051 .00055 .00058 .00062 .00066 .00073 .00052 .00055 .00059

.04080 .04080 .04080 .04080 .04080 .06375 .06375 .06375 .06375 .06375 .06375 .06375 .06375 .06375 .06375 .06375 .09180 .09180 .09180

.00097 .00097 .00097 .00097 .00097 .00152 .00152 .00152 .00152 .00152 .00152 .00152 .00152 .00152 .00152 .00152 .00219 .00219 .00219

1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 2.00 2.00 2.00

.116 .125 .134 .145 .156 .175 .190 .109 .116 .125 .134 .145 .156 .175 .188 .190 .109 .116 .125

1.268 1.250 1.232 1.210 1.188 1.150 1.120 1.532 1.518 1.500 1.482 1.460 1.438 1.400 1.374 1.370 1.782 1.768 1.750

1.719 1.840 1.960 2.104 2.245 2.483 2.665 1.915 2.029 2.175 2.318 2.492 2.662 2.951 3.140 3.173 2.207 2.340 2.509

.06560 .001562 .02620 .06375 .001518 .02805 .06193 .001474 .02987 .05974 .001422 .03206 .05758 .001371 .03422 .05396 .001285 .03784 .05118 .001219 .04062 .09576 .002280 .02919 .09402 .002238 .03093 .09180 .002186 .03315 .08961 .002134 .03534 .08697 .002071 .03798 .08437 .002009 .04058 .07997 .001904 .04498 .07703 .001834 .04792 .07658 .001823 .04837 .12956 .003085 .03364 .12753 .003037 .03567 .12495 .002975 .03825

.00062 .00067 .00071 .00076 .00081 .00090 .00097 .00070 .00074 .00079 .00084 .00090 .00097 .00107 .00114 .00115 .00080 .00085 .00091

.09180 .00219

Coiled Tubing Dimensions

.09180 .00219 .09180 .00219 .09180 .00219 .09180 .00219 .09180 .00219 .09180 .00219 .12495 .00298 .12495 .00298 .12495 .00298 .12495 .00298 .12495 .00298 .12495 .00298 .12495 .00298 .12495 .00298 .12495 .00298 .16320 .00389 .16320 .00389 .16320 .00389

OD

Wall

ID

Specified Specified Calculated

Nom. Wt lbs/ft

Internal Capacity/ft Gallons bbls

Displacement of Steel/ft Gallons bbls

External Displacement/ft Gallons bbls

OD

Wall

ID

Specified Specified Calculated

Nom Wt Internal Capacity lbs/ft Gallons bbls

Displacement Of Steel Gallons bbls

External Displacement Gallons bbls

2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.375 2.375 2.375 2.375 2.375 2.375 2.375 2.375 2.375 2.875

.134 .145 .156 .175 .188 .190 .203 .204 .125 .134 .145 .156 .175 .188 .190 .203 .204 .125

1.732 1.710 1.688 1.650 1.624 1.620 1.594 1.592 2.125 2.107 2.085 2.063 2.025 1.999 1.995 1.969 1.967 2.625

2.677 2.880 3.080 3.419 3.640 3.682 3.900 3.923 3.011 3.215 3.462 3.706 4.122 4.390 4.445 4.710 4.742 3.670

.12239 .11930 .11625 .11108 .10760 .10708 .10367 .10341 .18424 .18113 .17737 .17364 .16731 .16304 .16239 .15818 .15786 .28114

.002914 .002841 .002768 .002645 .002562 .002549 .002468 .002462 .004387 .004313 .004223 .004134 .003983 .003882 .003866 .003766 .003759 .006694

.04081 .04390 .04695 .05212 .05560 .05612 .05953 .05979 .04590 .04901 .05277 .05649 .06283 .06710 .06775 .07196 .07228 .05610

.00097 .00105 .00112 .00124 .00132 .00134 .00142 .00142 .00109 .00117 .00126 .00135 .00150 .00160 .00161 .00171 .00172 .00134

.16320 .16320 .16320 .16320 .16320 .16320 .16320 .16320 .23014 .23014 .23014 .23014 .23014 .23014 .23014 .23014 .23014 .33724

.00389 .00389 .00389 .00389 .00389 .00389 .00389 .00389 .00548 .00548 .00548 .00548 .00548 .00548 .00548 .00548 .00548 .00803

2.875 2.875 2.875 2.875 2.875 2.875 3.500 3.500 3.500 3.500 3.500 3.500 3.500 3.500 3.500 4.500 4.500 4.500

.156 .175 0.188 0.190 0.203 0.204 0.134 0.156 0.175 0.188 0.190 0.203 0.204 0.224 0.250 0.204 0.224 0.250

2.563 2.525 2.499 2.495 2.469 2.467 3.232 3.188 3.150 3.124 3.120 3.094 3.092 3.052 3.000 4.092 4.052 4.000

4.541 5.059 5.400 5.462 5.790 5.834 4.820 5.570 6.230 6.650 6.733 7.150 7.199 7.857 8.699 9.383 10.255 11.376

.26801 .006381 .06922 .26013 .006193 .07711 .25480 .006067 .08244 .25398 .006047 .08326 .24872 .005922 .08852 .24831 .005912 .08893 .42619 .010147 .07361 .41466 .009873 .08514 .40484 .009639 .09496 .39818 .009481 .10162 .39716 .009456 .10264 .39057 .009299 .10923 .39007 .009287 .10973 .38004 .009049 .11976 .36720 .008743 .13260 .68317 .016266 .14303 .66988 .015950 .15632 .65280 .015543 .17340

.00165 .00184 .00196 .00198 .00211 .00212 .00175 .00203 .00226 .00242 .00244 .00260 .00261 .00285 .00316 .00341 .00372 .00413

.33724 .00803

Coiled Tubing Dimensions 63

.33724 .00803 .33724 .00803 .33724 .00803 .33724 .00803 .33724 .00803 .49980 .01190 .49980 .01190 .49980 .01190 .49980 .01190 .49980 .01190 .49980 .01190 .49980 .01190 .49980 .01190 .49980 .01190 .82620 .01967 .82620 .01967 .82620 .01967

Cable Type

Size (In.)

Diameter (In.)

Breaking Strength (lbs)

Weight (lbs) 1000ft

Armor Wires (Out/In)

Wire BS lbs (Out/In)

CDR Resistance (Ohms/Mft)

Maximum Temp (F)

64

1-H-100-A 1-H-125-A 1-H-125-K 1-H-181-A 1-H-181-D 1-H-181-K 1-H-181-M 4-H-181-A 1-H-203-A 1-H-203-D 1-H-203-K 1-H-220-A 1-H-220-D 1-H-220-K 1-H-226-K 1-H-281-A 1-H-281-K 1-H-314-A 1-H-314-D 1-H-314-K 7-H-314-A

1/10 1/8 1/8 3/16 3/16 3/16 3/16 3/16 13/64 13/64 13/64 7/32 7/32 7/32 7/32 9/32 9/32 5/16 5/16 5/16 5/16

.101 .123 .123 .185 .185 .185 .187 .186 .203 .203 .203 .223 .223 .223 .222 .288 .288 .316 .316 .316 .323

1,000 1,500 1,500 3,900 3,900 3,900 3,600 3,300 4,500 4,500 4,500 5,500 5,500 5,500 5,000 10,000 10,000 11,200 11,200 11,200 9,600

19 27 28 63 65 65 68 60 79 79 80 92 95 95 99 153 158 183 187 190 180

18/12 18/12 18/12 15/12 15/12 15/12 15/12 18/18 16/10 16/10 16/10 18/12 18/12 18/12 18/12 18/12 18/12 18/12 18/12 18/12 18/18

41/41 60/60 60/60 198/127 198/127 198/127 198/132 143/76 212/212 212/212 212/212 212/212 212/212 212/212 196/196 352/352 352/352 426/426 426/426 426/426 426/225

25.2 25.2 25.2 9.8 9.8 9.8 12.5 26.0 6.9 6.9 6.9 4.5 4.5 4.5 7.7 2.8 2.8 2.8 2.8 2.8 16.6

300 300 500 300 420 500

Electric Line

600 300 300 420 500 300 420 500 500 300 500 300 420 500 300

Cable Type

Size (In.)

Diameter (In.)

Breaking Strength (lbs)

Weight (lbs) 1000ft

Armor Wires (Out/In)

Wire BS lbs (Out/In)

CDR Resistance (Ohms/Mft)

Maximum Temp (F)

1-H-375-A 1-H-375-D 1-H-375-K 3-H-375-A 4-H-375-A 7-H-375-A 1-H-422-A 1-H-422-D 1-H-422-K 7-H-422-A 7-H-422-D 7-H-422-K 7-H-464-A 7-H-464-D 7-H-464-K 7-H-520-A 7-H-520-D 7-H-472-A 7-H-472-D 7-H-472-K

3/8 3/8 3/8 3/8 3/8 3/8 7/16 7/16 7/16 7/16 7/16 7/16 15/32 15/32 15/32 17/32 17/32 Slammer Slammer Slammer

.375 .375 .375 .372 .372 .372 .414 .414 .414 .426 .426 .426 .462 .462 .462 .522 .522 .472 .472 .472

14,600 14,600 14,600 13,500 13,500 12,800 17,800 17,800 17,800 18,300 18,300 18,300 18,300 18,300 18,300 26,000 26,000 22,200 22,200 22,200

253 260 261 235 239 243 307 316 317 314 324 326 326 333 347 462 467 379 386 394

18/12 18/12 18/12 20/16 20/16 18/18 18/12 18/12 18/12 18/18 18/18 18/18 24/24 24/24 24/24 20/16 20/16 18/18 18/18 18/18

595/595 595/595 595/595 486/397 572/301 572/301 727/727 727/727 727/727 766/397 766/397 766/397 539/335 539/335 539/335 958/778 958/778 929/486 929/486 929/486

2.9 2.9 2.9 7.1 10.5 10.5 2.9 2.9 2.9 10.9 10.0 10.0 10.0 10.0 10.0 10.5 10.5 10.0 10.0 10.0

300 420 500 300 300 300 300 420 500 300 420 500 300 420 500 300 420 300 420 500

Electric Line 65

Carbon Steel API 9A Breaking Strengths

66

Sinker Bar Weight Needed

200 240 280 320 360 400 440 480 520 560 600 640 680 720 120 160 40 80 0

Material (In) Br. Steel API Level 3 or improved plow (lbs) API Ex. Impr. Plow, Hi-Str, or Mon. AA (lbs)

.072 961 1150

.082 1239 1460 .082 1083

.092 1547 1830 .092 1363 .092 1445 .092 1462 1550 1475 .092 1582 3/16 1 x 16 4500 4320

.105 1966 2360 .105 1732 .105 1885 .105 1818 2030 N/A .105 2009 3/16
1x 19 (Dycan/Dyform)

.108 2109 2490 .108 1786 .108 1995 .108 1924 2030 2050 .108 2080 7/32 1 x 16 6000 5842

.125 2794 3300 .125 2270

Austenitic Stainless Steel Breaking Strengths

1000

2000

9/1

.52
3000

6L

1L

ine

ine

7 /1

6L

ine

For wirelne to fall against well pressure, find desired line versus well pressure and extrapolate total sinker bar weight needed. All lbs are breaking strength. These vary with the manufacturer.

Material (In) 316 Stainless (lbs) Material (In)

Super Austenitic Stainless Breaking Strengths .125 2675 .125 2454 2560 2550 .125 2724 7/32
1x 19 (Dycan/Dyform)

Wireline Data

Well Pressure (psi)

Sandvik Sanicro 28 (lbs) Material (In) Avesta 254 SMO (lbs) Bridon Supa (lbs) 25-6MO (lbs) Material (In)

4000

6 Moly Stainless Steel Breaking Strengths

3 /8 e Lin

5000

5/1 6L

6000

ine

7000

Cobalt Based Alloy Breaking Strengths

7/32

8000

MP35N (lbs) Size (In) Construction Galv. Carbon Steel 15-6Mo (Supa 75)

Line

1/4 L ine

Braided Line Breaking Strengths

ne 3/16 Li

1/8 Line

9000

.072 Line

.092 Line

10000

.100 Lin

.082 Lin

6170 4960

8370 5990

Conversion Factors Field Units to Metric Conversion

If You Have: Multiply By: To Get:

67

Feet Inches Inches Pounds (Lbs) Pounds (Lbs) Pounds Weight (Lbs/ft) Pounds per Barrel Barrels Barrels Gallons Gallons Barrels/Stroke Barrels/Stroke Gallons/Minute Barrels/Minute Barrels/Minute bbl/ft. Capacity bbl/ft. Capacity Bbl Displacement Bbl Displacement Gradient psi/ft Gradient psi/ft Mud Weight PPG Mud Weight PPG Mud Weight PPG Mud Weight (Lb/Ft3) Fahrenheit Degrees PSI PSI PSI BWPD @ 8.9 ppg BOPD @ 7.74 ppg mmCFD @ 0.6 sp. gr.

x 0.3048 x 2.54 x 25.4 x 0.44482 x 0.4536 x 1.4882 x 2.85307 x 158.987 x 0.15898 x 3.7854 x 158.987 x 0.158987 x 3.7854 x 158.987 x 0.158987 x 521.612 x 0.521612 x 521.612 x 0.521612 x 22.6206 x 0.226206 x 0.119826 x 119.826 x 0.119826 x 1.60185 x 6894.8 x 6.8948 x 0.06895 X 0.118 X 0.099 X 14.1

Meters (M) Centimeters (cm) Millimeters (mm) Decanewtons (daN) Kilograms Kg/M Kg/M3 Liters Cubic Meters Liters Liters/Stroke Cubic Meters/Stroke Liters/Minute Liters/Minute Cubic Meters/Minute Liters/Meter (L/M) Cubic Meters/Meter Liters/Meter (L/M) Cubic Meters/Meter KPa/M Bar/M Kilograms/Liter (Kg/L)
Kilograms/Cubic Meter

x 0.0004536 Metric Tons

x 0.0037854 Cubic Meters

Specific Gravity (SG) Kg/M3 Pascals (Pa) Kilopascals (KPa) Bar Kg/Min Kg/Min Kg/Min

x 0.56 17.8 Celsius Degrees

68

Conversion Factors Metric to Field Units Conversion

If You Have: Multiply By: To Get:

Meters (m) Centimeters (cm) Millimeters (mm) Metric Tons Decanewtons (daN) Kilograms Kg/m Kg/m3 Liters Cubic Meters Liters Cubic Meters Liters/Stroke Cubic Meters/Stroke Liters/Minute Liters/Minute Cubic Meters/Minute Liters/Meter (l/m) Cubic Meters/Meter Liters/Meter (l/m) Cubic Meters/Meter KPa/m Bar/m Kilograms/Liter (Kg/L) Kilograms/Cubic Meter Specific Gravity (SG) Kg/m3 Celsius Degrees Pascals (Pa) Kilopascals (KPa) Bar Kg/Minute Kg/Minute Kg/Minute

x 3.2808 x 0.3937 x 0.03937 x 2204.6 x 0.22481 x 2.2046 x 0.67196 x 0.3505 x 0.00629 x 6.2898 x 0.2642 x 264.173 x 0.00629 x 6.2898 x 0.2642 x 0.00629 x 6.2898 x 0.0019171 x 1.917 x 0.0019171 x 1.9171 x 0.044207 x 4.4207 x 8.3454 x 0.0083454 x 8.3454 x 6.24279 x 1.8 + 32 x 0.000145 x 0.14504 x 14.50377 X 8.475 X 10.105 X 0.071

Feet Inches Inches Pounds (Lbs) Pounds (Lbs) Pounds Weight (Lbs/Ft) Pounds per Barrel Barrels Barrels Gallons Gallons Barrels/Stroke Barrels/Stroke Gallons/Minute Barrels/Minute Barrels/Minute BBL/Ft. Capacity BBL/Ft. Capacity BBL Displacement BBL Displacement Gradient PSI/Ft Gradient PSI/Ft Mud Weight PPG Mud Weight PPG Mud Weight PPG Mud Weight Lb/Ft3) Fahrenheit Degrees PSI PSI PSI BWPD @ 8.9 ppg BOPD @ 7.74 ppg mmCFD @ 0.6 sp.gr.

Notes & Calculations

69

70

Notes & Calculations