Heating Cable

DL
Integrated
Connection Accessories
RTPC RTST RTES
• Power Connection Box
• NEMA 4X Enclosure
• Cable Entry Up to 3 Cables
• 3/4" Conduit Hub Opening

• Splice & Tee Box

• NEMA 4X Enclosure
• Cable Entry Up to 3 Cables
• Straight or Tee Connections Description • Non-Flammable

The DL Series Installation Accessories for • High Strength and Rigidity

• End Seal Fitting Chromalox heat tracing products represents
• NEMA 4X Enclosure the state of the art in heat tracing. Each model
• Stainless Steel Hardware to
• Fits All Pipe Sizes Ensure the Integrity of the System
in the series is designed to satisfy the de-
Sa

• Mounting Feet for Installing mands of a particular operation. These high- • Liquid Tight Design prevents
on Flat Surfaces quality models combine a variety of functions moisture from reaching the
fe

in a convenient, easy to use and economical electrical connections. All models

• Stainless Steel Hardware package. are rated NEMA 4X.
En

• Corrosion & Weather Resistant Applications Approvals 2

Ryton® Construction
Connection of all Rapid Trace Heating Cables UL, CSA, FM Approved for most
er

to Customer Supplied Power Wiring in any of models, consult specific product

the following applications: information.
gy

• Hydrocarbon and Chemical UL Listed for ordinary areas

Product Piping
CSA Certified for ordinary and:
Sp

• Process Temperature
Maintenance • Class I, Div. 2, Groups A, B, C, D
a

• Fluid Flow and Viscosity • Class II, Div. 2, Groups F, G.

Maintenance FM Approved for ordinary and:
• Freeze Protection. • Class I, Div. 2, Groups B, C, D
Features • Class II, Div. 2, Groups F, G

• Molded of Durable Plastic Material • Class III, Div. 2 Areas.

(Ryton®‚ PPS)1
Notes —
• High Service Temperature 1. Ryton®‚ is a registered trade name of
Phillips Chemical Company.
• Corrosion Resistant 2. Depends on specific model and cable
• Integrated Connection Accessories and applied.
Controls
• Thermal Stability

G-72
 Heating Cable

DL
Construction
A Three strategically placed cable entries

Integrated Connection 5.25"
(13.3 cm)
4.25"
(10.8 cm)
allow maximum flexibility for insulation
(Heating cable cut away for clarity).
Accessories (cont’d.) E
B Stainless steel tiedown support provides
positive attachment to pipes.1
RTPC — Power Connection Kit
D C Heavy duty support legs give stable pipe
6.25"
RTPC Power Connection Box is a NEMA 4X (15.9 cm)
mounting and provide conduit clearance
rated junction box designed to connect all C for applications with up to three inches
Chromalox Rapid Trace Heating Cables to of insulation.
A B
customer supplied power wiring. This kit
provides waterproof cable entry for up to
D Opening for 3/4" (20 mm) conduit hub.1
three cables, enclosure support, terminal

E Oblique sided box and cover allow easy
block and a waterproof, corrosion resistant
access for wiring.
wiring enclosure with an opening to accept
a 3/4" conduit hub (Chromalox CCH-2 or
F Cable grommets provide water-tight seal
equal). A pipe strap (Chromalox PS or equal) between base, box and cable. Use GRSR
is required to attach this model to a pipe. H with all self-regulating cable. Use GRCW
for constant wattage cables. One of each
grommet included in kit. See table below
Sa

for spare grommets.

G
F
G Three position terminal block for easy
fe

I wiring.

H Power wiring entry. Conduit hub not
En

included.1

I Gasket provides water-tight seal between
er

box and lid. It is affixed to the lid and

RTPC — Power Connection Kit holds the mounting hardware during
assembly.
gy

1 molded junction box consisting of:

1 base Note 1 — Refer to DL & EL General Applica-
1 box w/conduit opening tion Accessories at the end of this section.
Sp

1 lid
1 three position terminal block
1 mounting screw for terminal block
RTPC-SL — Power Connection Kit
a

1 GRSR self-regulating cable sealing grommet

1 GRCW constant wattage sealing grommet w/Signal Light (Ordinary Area Only)
1 molded junction box consisting of:
1 base
Ordering Information — RTPC
1 box w/conduit opening

and controls
accessories
1 lid w/signal light installed (LED style)
Wt. Wt. Specify: SL1(120V), SL2(208-240V),
Model
Model PCN
PCN Stock
Stock (Lbs.)
(Lbs.) SL3(277V) operation
RTPC 389554 S 1 1 three position terminal block
RTPC-SL1 389626 S 2 1 mounting screw for terminal block
RTPC-SL2 389634 S 2 1 GRSR self-regulating cable sealing grommet
RTPC-SL3 389642 S 2 1 GRCW constant wattage sealing grommet

Spare Grommets PCN

GRS RTD/Capillary type 385000
GR0 Blank 385019
GRSR Self Regulating type 389714
GRCW Constant Wattage type 389722

G-73
 Heating Cable

DL Construction
Integrated Connection 5.25"
(13.3 cm) 4.25"

Accessories (cont’d.) A Three strategically placed cable entries

(10.8 cm)

allow maximum flexibility for insulation

(heating cable cut away for clarity).
RTST — Splice & Tee Kit D B Stainless steel tiedown support provides

RTST Splice & Tee Box is a NEMA 4X rated 6.25" positive attachment to pipes.1
junction box designed to make straight or tee (15.9 cm)

C Heavy duty support legs give stable pipe

splices for all Chromalox Rapid Trace Heating A C
Cables. This model provides waterproof cable mounting and provide conduit clearance
entry (for two cables for a splice or three B for applications with up to three inches of
cables for a tee), enclosure support, terminal insulation.
block and a waterproof, corrosion resistant D Oblique sided box and cover allow easy

wiring enclosure. A pipe strap (Chromalox PS
access for wiring.
or equal) is required to attach this model to a
pipe.
E Cable grommets provide water-tight seal
between base, box and cable. Use GRSR
with all self-regulating cable. Use GRCW
for constant wattage cables. Three of
Sa

each grommet included in kit. See table

E below for spare grommets.
G F
E
fe

F Three position terminal block for easy
wiring.
En

G Gasket provides water-tight seal between
box and lid. It is affixed to the lid and
holds the mounting hardware during
er

assembly.
RTST — Splice & Tee Kit
Note 1 — Refer to DL & EL General Applica-
gy

1 molded junction box consisting of: tion Accessories at the end of this section.
1 base
1 box
Sp

1 lid RTST-SL — Splice & Tee Kit

1 three position terminal block
1 mounting screw for terminal block w/Signal Light (Ordinary Area Only)
a

3 GRSR Self-regulating cable sealing grommet

1 molded junction box consisting of:
3 GRCW Constant wattage sealing grommets
1 base
1 box
1 lid w/signal light installed (LED style)
Specify: SL1 for 120 Volt, SL2 for 208-240
Volt, SL3 for 277 Volt operation
Ordering Information — RTPC 1 three position terminal block
Wt. 1 mounting screw for terminal block
Model PCN Stock (Lbs.) 1 GRSR Self-regulating cable sealing grommet
RTST 389562 S 1 1 GRCW Constant wattage sealing grommet
RTST-SL1 389650 S 2
RTST-SL2 389669 S 2
Spare Grommets PCN
RTST-SL3 389677 S 2
GRS RTD/Capillary type 385000
GR0 Blank 385019
GRSR Self Regulating type 389714
GRCW Constant Wattage type 389722

G-74
 Heating Cable

DL Construction
Integrated Connection

A Cable entry.
Accessories (cont’d.)
1.75"
(4.45 cm)

B

B Three inch diameter curved mounting
RTES — End Seal Kit
1.25"
(3.18 cm)
D C surface.
A

C Captured stainless steel hardware.
RTES End Seal Fitting is a NEMA 4X rated
enclosure designed to terminate all Chromal-
D One inch wide strapping channel
ox Rapid Trace Heating Cables. This model for secure mounting.
provides waterproof cable entry for one 2"
(5.08 cm)

cable, enclosure support and a waterproof

E One-half inch radius curved mounting
corrosion resistant enclosure. The fitting surface.
has two different curved mounting surfaces.
F End cap.
One side has a 1-1/2" radius curved surface
that provides stable support on pipes with a
G Cable grommet provides water-tight
diameter of 3" or more. The other side has I seal between end cap and pressure
a 1/2" radius curved surface which permits a E plate. Use GRSR with all self-regulating
F
better fit on smaller pipes. In addition, this cables. Use GRCW with constant wattage
side also has four “feet” for installation on flat G cables. One of each grommet included in
surfaces. kit. See table below for spare grommets.
Sa

E H
I
H Pressure plate.
fe

I Mounting feet for installation on flat

surfaces.
En

RTES — End Seal Kit Ordering Information — RTES

er

Wt.
1 end cap Model PCN Stock (Lbs.)
1 pressure plate
gy

RTES 389570 S 1
1 GRSR Self-regulating cable sealing grommet
1 GRCW Constant wattage cable sealing
grommet
Sp

Spare Grommets PCN

DL Accessory Components
a

GRS RTD/Capillary type 385000

MP-1 (385780) GR0 Blank 385019
Mounting Plate GRSR Self-Regulating type 389714
GRCW Constant wattage type 389722
Kit Attachments

and controls
For installing RTPC and RTST kits

accessories
on flat surfaces. Kit includes:
1 mounting plate
1 lock washer
1 bolt
1 washer
1 nut

Note — The complete line of DL & EL Mounting

Accessories is located at the end of this section.

G-75