Scribd
Upload
153 views2 pages

TDS - Superfloc C-492HMW - EN

FLOC TDS 1

Uploaded by

patriciatoros88
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
153 views2 pages

TDS - Superfloc C-492HMW - EN

FLOC TDS 1

Uploaded by

patriciatoros88
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet 1 (2)

June 18

SUPERFLOC® C-492HMW
Cationic Dry PAMs

C-492HMW is one of Kemira’s highly effective Health and Safety


cationic flocculants of high molecular weight.
Before handling these materials read the
They condition solids for dewatering operations
corresponding Kemira Safety Data Sheets (SDS)
and aid water clarification processes in various
for safety and health data.
industries. They show exceptional performance
in liquid-solid separations in a wide range of For chemical inventory regulatory control listing
conditions. information, see the SDS.

Applications Handling and Storage

This product may be beneficial in any liquid-solid Solutions are no more corrosive than water.
Recommended materials of construction include
separation process. They are especially
stainless steel, fibreglass, plastic, and glass or
recommended for: epoxy-lined vessels. Do not use iron, copper or
aluminum.
• Belt filter, centrifuge and screw press
dewatering The shelf life of these products is 24 months
when stored in unopened packages in a dry
• Dissolved air flotation
atmosphere at temperatures no higher than
• Filtration 40°C/104°F.

• Thickening Spilled polymer is very slippery and should be


absorbed onto an inert material and collected
• Water Clarification. prior to thoroughly flushing with water.
Benefits
Product Addition
• Dry product minimizes storage
requirements Stock solutions can be prepared up to 0.5 %
concentration via an automated make-up unit or
• Economical to use – effective at low on a batch basis. Solutions should be aged 30-
dosage levels 60 minutes for maximum effectiveness. High
• Effective high solids removal quality make up water should be used.
Secondary dilution water should be added to the
• Effective over a wide range of pH; does
stock solution prior to the addition point at a ratio
not alter the system pH
up to 10:1. Centrifugal pumps should be avoided
• Improve production and cake solids. for polymer transfer.

Kemira Oyj
P.O.Box 330 Europe, Middle-East and Africa South America
FI-00101 Helsinki Tel +358 10 8611 Tel +55 11 2189 4900
Finland North America Asia-Pacific
www.kemira.com Tel +1 770 436 1542 Tel +86 21 6037 5999
Technical Data Sheet 2 (2)

June 18

Delivery Kemira sales Representative for more details, or


refer to the appropriate regulatory information
The Superfloc C-492HMW is typically available in
sheet.
25 kg & 750 kg moisture-resistant bags. Other
pack sizes may be available on request.

Regulatory Approvals

These products may conform to certain


regulatory requirements. Please contact your

Typical Product Properties

C-492HMW
Chemical Type Cationic Polyacrylamide
Appearance Off-white, Granular Powder
Relative Charge Low
Molecular weight Very High
Bulk Density (kg/litre) 0.75
pH of 0.5% solution (25°C) 3-5
Viscosity @ 25°C (cP / mPa.sec)
0.10% 120
0.25% 300
0.50% 600
1.00% 1500

The typical product properties are stated for guidance only and may change overtime . Please refer to the
product specific Kemira Sales Specification for the actual product specification.

Kemira makes this information available as an accommodation to its customers and it is intended to be solely a guide in customer’s evaluation of the
products. You must test our products, to determine if they are suitable for your intended uses and applications, as well as from the health, safety and
environmental standpoint. You must also instruct your employees, agents, contractors, customers or any third party which may be exposed to the products
about all applicable precautions. All information and technical assistance is given without warranty or guarantee and is subject to change without notice.
You assume full liability and responsibility for compliance with all information and precautions, and with all laws, statutes, ordinances and regulations of any
governmental authority applicable to the processing, transportation, delivery, unloading, discharge, storage, handling, sale and use of each product. Nothing
herein shall be construed as a recommendation to use any product in conflict with patents covering any material or its use. Superfloc are trademarks or
registered trademarks of Kemira Oyj or its subsidiaries.

Kemira Oyj
P.O.Box 330 Europe, Middle-East and Africa South America
FI-00101 Helsinki Tel +358 10 8611 Tel +55 11 2189 4900
Finland North America Asia-Pacific
www.kemira.com Tel +1 770 436 1542 Tel +86 21 6037 5999

You might also like