Modul

Sl.No. Question Marks CO BL

e
1 Why pu representation is necessary? 2 2 CO2 BL2
Explain the requirements of planning the operation of a
2 2 1 CO1 BL1
power system.
3 Define steady state operating condition. 2 1 CO1 BL1
What is a disturbance and what are the two types of
4 2 1 CO1 BL1
disturbances?
5 What is a small disturbance? Give example. 2 1 CO1 BL1
6 What is a large disturbance? Give some examples. 2 1 CO1 BL1
When is a power system said to be steady-state
7 2 1 CO1 BL1
stable?
8 Why power flow analysis is made? 2 2 CO2 BL2
9 When is a power system said to be transiently stable? 2 1 CO1 BL1
10 What is transient state of the power system? 2 1 CO1 BL1
What is the advantage of per unit method over percent
11 2 1 CO1 BL1
method?
12 Define base impedance and base kilovoltamperes. 2 1 CO1 BL1
13 Define per unit value of any electrical quantity. 2 1 CO1 BL1
What are the quantities whose base values are
14 required to represent the power system by reactance 2 1 CO1 BL1
diagram?
15 What is the need for base values? 2 1 CO1 BL1
16 List the advantages of per unit computations. 2 1 CO1 BL1
17 What are the factors that affect the transient stability? 2 1 CO1 BL1
18 What is power flow study or load flow study? 2 2 CO2 BL2
19 What is the need for load flow study? 2 2 CO2 BL2
20 What are the works involved in a load flow study? 2 2 CO2 BL2
What are the different types of buses in a power
21 2 2 CO2 BL2
system?
22 Define voltage controlled bus(generator bus/PV bus). 2 2 CO2 BL2
23 What is PQ bus(load bus)? 2 2 CO2 BL2
24 What is swing bus(slack bus/reference bus)? 2 2 CO2 BL2
25 What is the need for slack bus? 2 2 CO2 BL2
How will you account for voltage controlled buses in
26 2 2 CO2 BL2
the load flow algorithm?
Discuss what do you understand by power system
27 5 1 CO3 BL3
stability?
Why do we go for iterative methods to solve load flow
28 2 2 CO2 BL2
problems?
29 What do you mean by a flat voltage start? 2 2 CO2 BL2
30 What are the advantages of Gauss-Seidel method? 2 2 CO2 BL2
31 What are the disadvantages of Gauss-Seidel method? 2 2 CO2 BL2
32 Discuss the state of operation and system security. 5 1 CO3 BL3
Discuss the current status and recent trends of system
33 10 1 CO3 BL3
dynamic problem.
34 Discuss and explain the system operating states. 10 1 CO3 BL3
Draw and explain single line diagram of a single
35 5 1 CO3 BL3
machine system.
Page 2 of 6
© Q.Bank:PECEEE701A, Printed by:G12120nc, Date & Time:9-11-22 18:25:31
 36 Derive and explain the swing equation. 5 1 CO3 BL3
Why q axis and d-axis represntation is neceassry for
37 5 3 CO3 BL3
synchronous machine
38 What is park transformation? 5 3 CO3 BL3
Why q-d analysis is not possible for cylindrical type
39 5 3 CO3 BL3
synchronous machine?
Derive the mathematical modelling for the torque
40 5 3 CO3 BL3
equation of machine.
Derive the flux linkage for synchronous machine using
41 10 3 CO3 BL3
park transformation.
Derive the torque equation for synchronous machine
42 10 3 CO3 BL3
using park transformation.
43 Analyze the performance of the loaded generator 10 3 CO4 BL4
Discuss the performance for an alternator with zero
44 10 3 CO4 BL4
load
Draw the different controlling parameters for the
45 excitation system and evaluate their usefullness in the 10 4 CO5 BL5
operation.
Design the IEEE type1 exciation system with proper
46 10 4 CO6 BL6
block diagram and discussion.
Design the transfer function for a Dc seperately excited
47 10 4 CO6 BL6
generator.
Design the state space equation for a Dc seperately
48 10 4 CO6 BL6
excited generator from transfer fucntion modelling.
Discuss different acpects of prime mover control
49 5 4 CO4 BL4
system
Discuss the different types of speed governing
50 5 4 CO4 BL4
systems.
Deduce the relationhsip between torque and load
51 5 4 CO4 BL4
angle for a synchronous machine
Draw the phasor diagram with q-d axis component to
52 deduce the relationship between sending and receving 5 4 CO4 BL4
end voltage
Evaluate the different base quantity for the stator side
53 5 3 CO5 BL5
of the synchronous machine
Evaluate the different base quantities for the rotor side
54 5 3 CO5 BL5
of the synchronous machine
Evaluate the equivalent d-axis circuit diagram for the
55 5 3 CO5 BL5
synchornous machine and mention all the parameters.
56 Illustrate the concept of equilibrium point? 5 2 CO4 BL4
Sketch and illustrate the equivalent circuit of a system
57 5 2 CO4 BL4
model of single machine system.
58 Analyze the stability of the equilibrium point. 10 2 CO4 BL4
Analyze the mathematical modeling of a transmission
59 5 2 CO4 BL4
network.
60 Analyze the function of static VAR compensator. 5 2 CO4 BL4
Mathematically analyze the transformation of
61 10 2 CO4 BL4
transmission lines to D-Q components.

Page 3 of 6
© Q.Bank:PECEEE701A, Printed by:G12120nc, Date & Time:9-11-22 18:25:31
 Evaluate the steady state equation of the transmission
62 10 2 CO5 BL5
line model.

63 Evaluate D-Q transformation using variable 5 2 CO5 BL5

for a transmission line model.
Assess the concept of variable impedance type SVCs
64 5 2 CO5 BL5
using necessary diagrams.
Design an induction motor model to represent the
65 10 2 CO6 BL6
dynamic load of a transmission line model.
66 Model a static VAR compensator. 10 2 CO6 BL6
67 Draw and explain SVC control characteristics. 10 2 CO2 BL2
68 Discuss voltage source type SVC. 10 2 CO2 BL2
What are the quantities whose base values are
69 required to represent the power system by reactance 2 7 CO1 BL1
diagram?
70 What is the need for base values? 2 7 CO1 BL1
71 List the advantages of per unit computations. 2 7 CO1 BL1
72 What are the factors that affect the transient stability? 2 14 CO1 BL1
List the methods of improving the transient stability
73 2 14 CO1 BL1
limit of a power system.
74 What is meant by stability study? 2 15 CO1 BL1
75 What is meant by short circuit fault? 2 15 CO1 BL1
76 What is a reactor? 2 15 CO1 BL1
Why the line value of voltage directly used for per unit
77 calculation in three phase 2 15 CO2 BL2
systems?
Why the three phase kVA directly used for per unit
78 2 15 CO2 BL2
calculation in three phase systems?
List the assumptions made in multimachine stability
79 2 9 CO2 BL2
studies.
80 What is meant by an infinite bus? 2 9 CO2 BL2
81 What is Multimachine stability? 2 9 CO2 BL2
82 Define critical clearing angle 2 9 CO2 BL2
83 State equal area criterion 2 9 CO2 BL2
Applying block diagram representation discuss small
84 5 7 CO3 BL3
signal analysis of a single machine system.
Derive the rotor mechanical equation and torque angle
85 5 7 CO3 BL3
loop of a single machine system.
Represent the flux decay of a single machine sytem
86 5 7 CO3 BL3
applying necessary equations and block diagram.
Represent the excitation system of a single machine
87 sytem applying necessary equations and block 5 7 CO3 BL3
diagram.
Derive the characteristic equation of a single machine
88 10 7 CO3 BL3
system and apply Routh - Hurwitz criterion.
Analyze the syschronizing and damping torque of a
89 5 7 CO4 BL4
single machine system.
90 What is meant by a fault? 2 1 CO1 BL1
91 Give the reason for faults in power system? 2 1 CO1 BL1
Page 4 of 6
© Q.Bank:PECEEE701A, Printed by:G12120nc, Date & Time:9-11-22 18:25:31
 List the various types of symmetrical and
92 2 1 CO1 BL1
unsymmetrical faults.
For a fault at a given location, rank the various faults in
93 2 1 CO1 BL1
the order of severity.
94 What is meant by fault calculations? 2 1 CO1 BL1
95 What is synchronous reactance? 2 1 CO1 BL1
96 Define subtransient reactance. 2 1 CO1 BL1
Analyze a simplified system model of a multimachine
97 5 7 CO4 BL4
system.
98 Analyze the model of large power system. 5 7 CO4 BL4
99 Evaluate the transient stability criterion. 5 7 CO5 BL5
Evaluate the importance of dynamic braking in power
100 5 7 CO5 BL5
system dynamics.
Elaborate the effect of system parameters on transient
101 10 7 CO2 BL2
stability criterion.
102 Define transient reactance. 2 1 CO2 BL2
Elaborate the effects of excitation and prime mover
103 10 7 CO2 BL2
control in transient stability criterion.
What is the significance of subtransient reactance and
104 2 1 CO2 BL2
transient reactance in short circuit studies?
105 What are symmetrical components? 2 1 CO2 BL2
Write the symmetrical components of three phase
106 2 1 CO2 BL2
system.
Define negative sequence and zero sequence
107 2 1 CO2 BL2
components.
Define positive sequence and negative sequence
108 2 1 CO2 BL2
impedances.
What are sequence impedances and sequence
109 2 1 CO2 BL2
networks?
110 What is bus admittance matrix? 2 1 CO2 BL2
Evaluate the effect of series capacitor insertion in a two
111 10 7 CO5 BL5
machine system.
Evaluate the emergency control measures to prevent
112 10 7 CO5 BL5
failure of power systems leading to blackouts.
113 What is meant by transient period of a signal? 5 12 CO3 BL3
114 Explain the concept of generator tripping. 10 7 CO3 BL3
115 What is voltage stability? 5 12 CO3 BL3
Mention the factors affecting the voltage stability of a
116 5 12 CO3 BL3
system
117 What is static excitation system 5 4 CO4 BL4
Represent the synchornous machine in q-axis and d-
118 5 4 CO4 BL4
axis form.
Prove that, if the armature flux linkage components,
with respect to a synchronously rotating reference
119 frame, are constants, then the transformer emf terms 5 4 CO4 BL4
(pt/Jd and riq) and terms introduced by the variations in
the rotor speed cancel each other
Why it is always taken that poles in the left hand side
120 5 4 CO4 BL4
of the s-plane will be stable

Page 5 of 6
© Q.Bank:PECEEE701A, Printed by:G12120nc, Date & Time:9-11-22 18:25:31
 121 Why synchronous motor is not self starting? 5 4 CO5 BL5
122 Compare the angle and voltage stability. 5 4 CO5 BL5
Why perunit representation is necessary for power
123 5 4 CO5 BL5
system?
Discuss the Transient Analysis of a Synchronous
124 10 4 CO5 BL5
Machine.
125 Discuss the Working principal of synchronous motor 10 4 CO5 BL5
126 Discuss the Working principal of Alternator 10 4 CO4 BL4
Why AVR is required for alternator operation? Explain
127 10 4 CO2 BL2
this with proper reasons

Page 6 of 6
© Q.Bank:PECEEE701A, Printed by:G12120nc, Date & Time:9-11-22 18:25:31