Scribd
Upload
349 views1 page

Zinc Coating Thickness

Galvanizing Thikness

Uploaded by

Mojibur Rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
349 views1 page

Zinc Coating Thickness

Galvanizing Thikness

Uploaded by

Mojibur Rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Document No:- GSEL/2/QAD/ZCTC-0170

Global Steel and Engineering Limited (GSEL)


Head Office: Scout Bhaban (3rd Floor) Factory: Shoilabil, Paruhala
70/1, Inner Circular Road Dhamrai, Dhaka
kakrail, Dhaka-1000 Bangladesh
Bangladesh

ZINC COATING THICKNESS CHART FOR STRUCTURAL STEEL


Zinc Coating Thickness As per ISO 1461 (Not Centrifuged)
Local Coating Thickness (min.) Mean Coating Thickness (min.)
Thickness in mm
Microns (µm) Gms/m² Microns (µm) Gms/m²
Greater than 6mm (>6mm) 70 505 85 610
Greater than 3mm but less than & equal 6mm (>3 to
55 395 70 505
≤6mm)
Greater than 1.5mm but less than & equal 3mm
45 325 55 395
(≥1.5 to ≤3mm)
Less than 1.5mm (<1.5mm) 35 250 45 325

Zinc Coating Thickness As per ISO 1461 (Centrifuged)


Local Coating Thickness (min.) Mean Coating Thickness (min.)
Thickness in mm
Microns (µm) Gms/m² Microns (µm) Gms/m²
Article with threads:
> 6mm diameter 40 285 50 360
≤ 6mm diameter 20 145 25 180
Other Articles (Including castings):
≥ 3mm 45 325 55 395
< 3mm 35 250 45 325

Zinc Coating Thickness As per BS 729


Mean Coating Average & Average mass of Coating
Thickness in mm
Gms/m² Microns (µm)
5mm Thickness and over 610 85
Under 5mm, but not less 2mm 460 65
Under 2mm, but not less 1.0mm 335 47

Zinc Coating Thickness As per IS 4759


Mean Coating Average & Average mass of Coating
Thickness in mm
Gms/m² Microns (µm)
5mm Thickness and over 610 86

Under 5mm, but not less 2mm 460 65

Under 2 mm, but not less 1.2mm 340 48

Zinc Coating Thickness As per ASTM 123


Mean Coating Average & Average mass of Coating
Thickness in mm
Gms/m² Microns (µm)
Greater than and equal to 6.4mm (≥6.4mm) 705 100
Greater than 4.8mm to less than 6.4mm (>4.8 to
600 85
<6.4mm)
3.2mm to 4.8mm (≥3.2 to ≤4.8mm) 530 75
1.6mm to less than 3.2mm (1.6 to <3.2mm) 460 65

Zinc Coating Thickness As per ASTM 153


Mean Coating Average & Average mass of Coating
Thickness in mm
Gms/m² Microns (µm)
4.76mm and Over in thickness and over 15 inch in length 610 86

Under 4.76mm in thickness and over 15 inch in length 458 66

Any thickness and 15 inch and under in length 397 56


Over 9.52mm in diameter and similar Articles 381 53
Washer 4.76mm and 6.35mm in thickness 381 53
Under 9.52 diameter and similar Articles 305 43
Washer Under 4.76mm in thickness 305 43

You might also like