OSBDM User Manual

OSBDM Upgrade
User Manual
TRACOSBDMUM001
Revision: 1.05

http://www.queclink.com
[email protected]

-1-
OSBDM User Manual

Document Title OSBDM User Manual

Version 1.05

Date 2013-3-19

Status Release

Document Control ID TRACOSBDMUM001

k
General Notes

n
Queclink offers this information as a service to its customers, to support application and

i
engineering efforts that use the products designed by Queclink. The information provided

l l
is based upon requirements specifically provided to Queclink by the customers. Queclink

c
has not undertaken any independent search for additional relevant information, including

ia
any information that may be in the customer’s possession. Furthermore, system validation

e t
of this product designed by Queclink within a larger electronic system remains the

u
responsibility of the customer or the customer’s system integrator. All specifications

n
supplied herein are subject to change.

Q fide
Copyright
This document contains proprietary technical information which is the property of Queclink
Limited., copying of this document and giving it to others and the using or communication
of the contents thereof, are forbidden without express authority. Offenders are liable to the

n
payment of damages. All rights reserved in the event of grant of a patent or the
registration of a utility model or design. All specification supplied herein are subject to

o
change without notice at any time.

C
Copyright © Shanghai Queclink Wireless Solutions Co., Ltd. 2011

-2-
OSBDM User Manual

Contents

1. Introduction ................................................................................................................................... 5
1.1. Reference............................................................................................................................. 6
1.2. Terms and Abbreviations ..................................................................................................... 6
2. Upgrade Flow................................................................................................................................ 6
2.1. Download Software ............................................................................................................. 6
2.2. Install Software ................................................................................................................... 6
2.3. Install driver ........................................................................................................................ 7
2.4. FLASH PROGRAMM(HCS08).......................................................................................... 9

k
2.5. Configure USBDM ........................................................................................................... 10

n
2.6. Connect PC and set ........................................................................................................... 11

i
2.7. Config the Target ............................................................................................................... 12

l l
2.7.1. Step 1: select the software ............................................................................... 13

c
2.7.2. Step2: Select the Chip Type ............................................................................ 14

ia
2.7.3. Step3 Clock type and parameters .................................................................... 15

e t
2.7.4. Step4 Set erase option ..................................................................................... 16
2.7.5. Setp5 Program the device ................................................................................ 16

u n
2.8. End of Program ................................................................................................................. 17

Q fide
2.9. Reset the set....................................................................................................................... 17

o n
C
-3-
OSBDM User Manual

Table Index

Revision History
Revision Date Author Description of change
1.00 2012-01-31 Owen Feng Initial
1.01 2012-02-07 Owen Feng change some notes
1.02 2012-02-07 Owen Feng Add picture
1.03 2012-07-05 Owen Feng 1- add user cable check
2- add clock selection

k
1.04 2012-7-30 Owen feng Add gv55/gv55lite mcu selection

n
1.05 2013-3-19 Owen feng Add USBDM_JS16

cl i a l
u e n t i
Q fide
o n
C
-4-
OSBDM User Manual

1. Introduction

USBDM is a debugger hardware interface for a range of Freescale microcontrollers. It is

designed to work with Freescale's Codewarrior software under Windows and Linux. More
recently basic support for Coldfire with Codesourcery Tool chain has been added (WIN
only).
We supply two version USBDM upgrade tools, one is USBDM_JB16, another is
USBDM_JS16.The following are the pictures of the two sets. There only one difference for
used as a upgrade tool. Please see configure USBDM for detail.

i n k
cl ia l
u e n t
Q fide Figure 1. USBDM_JB16 Board

o n
C
Figure 2. USBDM_JS16 Board

-5-
OSBDM User Manual

1.1. Reference

1.2. Terms and Abbreviations

2. Upgrade Flow

2.1. Download Software

k
http://sourceforge.net/projects/usbdm/files/USBDM_4_8_0_Win.msi
For this version have deleted from the web, please contact with Queclink for this

n
version.

cl i a l
u e n t i
Q fide
o n
C
2.2. Install Software

Please exclude MCU V10.X in install option.

-6-
OSBDM User Manual

i n k
cl ia l
u e n t
Q fide
2.3. Install driver

Plug the USBDM cable in the computer, and then install the USB driver. USBDM USB

n
driver path can get as click the menu.

Co

-7-
OSBDM User Manual

i n k
cl ia l
u e n t
Q fide
n
Then in the computer set management, a new set “libusb”(winusb)devices will appear.

Co

-8-
OSBDM User Manual

i n k
cl ia l
u e n t
2.4. FLASH PROGRAMM(HCS08)

Q fide
Run HCS08 Programmer from menu.

o n
C
-9-
OSBDM User Manual

2.5. Configure USBDM

The first step is to configure USBDM , that can let MCU enter BDM mode. Please
configure USBDM_JB16 following the picture.

i n k
cl ia l
u e n t
Q fide
o n
C
If use USBDM_JS16,please configure as the following picture.

- 10 -
OSBDM User Manual

i n k
cl ia l
u e n t
Q fide
o n
C
2.6. Connect PC and set

Connect PC and set by Queclink USB/BDM cable. For BDM supply power for MCU ,so the
set must be turned off firstly.
For GV300/GV55: turn off external power and switch the battery switcher to OFF position.
For GMT100: turn off external power and press reset button.
For GL500: remove the CR123 battery.
For GV55Lite: remove the external power supply.
For GT200M: power off device.

- 11 -
OSBDM User Manual

2.7. Config the Target

Check User cable connection:

i n k
cl ia l
u e n t
Q fide OSBDM user cable connection
Connect OSBDM with PC and Target(the example is GMT100).

o n
C
- 12 -
OSBDM User Manual

i n k
cl ia l
u e n t
Q fide
2.7.1. Step 1: select the software

o n
C
The selected software filename will be shown as in the figure. Sometimes it will appear file
open fail, this is a software compatible problem, move the file to root.

- 13 -
OSBDM User Manual

2.7.2. Step2: Select the Chip Type

i n k
cl ia l
e
Click the button “detect chip”, then chip id such as “6009” will be shown. If chip ID can

t
not be seen, there is connection problem. Please reconnect and try again.

u
Q fide n
o n
C
In the Dropdown menu, select the right chip.

GMT100 must select QG-MC9S08QG8

GV300 must select QG-MC9S08QG4
- 14 -
OSBDM User Manual

GV300D must select QG-MC9S08QG8

GL500 must select QG-MC9S08QG8
GV55 must select QG-MC9S08QG8
GV55Lite must select QG-MC9S08QG4
GT200M must select QG-MC9S08QG8

2.7.3. Step3 Clock type and parameters

n k
Select Trim frequency:

cl i a l
u e n t i
Q fide
o n
C
- 15 -
OSBDM User Manual

2.7.4. Step4 Set erase option

i n k
cl ia l
u e n t
Q fide
In the dropdown menu,please check “EraseMass” option in this menu.

n
2.7.5. Setp5 Program the device

Co

- 16 -
OSBDM User Manual
Then a process bar appears.

2.8. End of Program

i n k
cl ia l
u e n t
Q fide
o n
C
2.9. Reset the set

For MCU will stay at upgrade mode when the set removed from the PC, please reset
the set according the set user manual.

- 17 -