CAO-C-NER-ENGG/NORTH EASTERN RLY

TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

CAO/Con/GKP acting for and on behalf of The President of India invites E-Tenders against Tender No DYCE-CON-G-GKP-14-2024
Closing Date/Time 24/09/2024 15:00 Hrs. Bidders will be able to submit their original/revised bids upto closing date and time only.
Manual offers are not allowed against this tender, and any such manual offer received shall be ignored.

1. NIT HEADER

Construction of station building, platform, RCC over head water tank, foundation of FOB and
Name of Work PP shelter including boundary wall at Khalilabad IInd Entry Bhagauli, Bakhira, Mehdawal and
Pasai Halt Station in connection with Khalilabad-Bahraich New line project.
Bidding type Two Stage Reverse Auction
Tender Type Open Bidding System Two Packet System
Tender Closing Date Time 24/09/2024 15:00 Date Time Of Uploading Tender 30/08/2024 15:54
Pre-Bid Conference
No Pre-Bid Conference Date Time Not Applicable
Required
Advertised Value 897426990.97 Tendering Section NL
Bidding Style Single Rate for Each Schedule Bidding Unit
Earnest Money (Rs.) 4637100.00 Validity of Offer ( Days) 90
Tender Doc. Cost (Rs.) 0.00 Period of Completion 18 Months
Contract Type Works Contract Category Expenditure
Are Joint Venture (JV) firms
Bidding Start Date 10/09/2024 Yes
allowed to bid
Ranking Order For Bids Lowest to Highest Expenditure Type Capital (Works)

Auto Elimination rules

Yes Minimum Decrement (%) .25
applicable
Initial Cooling Off Period Subsequent Cooling Off
04:00 00:30
(HH:MM) Period (HH:MM)

2. SCHEDULE

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule A1-Schedule 252431145.60
Below/Par
1 1850.00 cum 3385.17 6262564.50 AT Par 6262564.50
Description:- Prov. CC M-7.5 (1:4:8) with 40 mm stone aggregate, coarse sand and cement in foundation &
1 flooring incl. bailing out or pumping of water and laying concrete under water if required, incl. supplying, fixing and
removal of form work, with all cost incl. cost of labour, shuttering, moulds, T&P, plants, materials etc. complete with
all lead, lift, ascend, descend, crossing of track, nallah, fencing, river etc. (Cement will be paid separately).
2 10652.00 cum 4155.58 44265238.16 AT Par 44265238.16
Description:- Cement concrete M-10 in lean concrete in foundation and flooring with stone aggregate 40mm
2 gauge including cost of materials i.e. stone aggregate, coarse sand, fixing and removing form work if required with
all leads, lifts, ascents, descents, Xing of road, track, bund, channel, fending with all labour and materials as per
plan, specification & as per-direction of engineer in charge. (Cement will be paid separately).
3 300.00 cum 4586.50 1375950.00 AT Par 1375950.00
Description:- Providing C.C. M-15 in foundation in 150mm thick layer with stone aggregate of max. size 20 mm
3 and of approved quality and grading including fixing and removal of all shuttering /moulds with contractor's own
materials including cement and including cost of all centering shuttering, plant and equipment labour, vibrating,
tamping, curing finishing etc. complete job (cement will be paid separately).
4 7250.00 cum 6289.38 45598005.00 AT Par 45598005.00
Description:- Providing CC/RCC M-20 with 20mm crushed stone aggregate, coarse sand and cement in
foundation, substructure & super structure such as pier, abutment, wing wall, return wall, coping etc. including
4 bailing out or pumping of water and laying concrete under water if required including supplying, fixing and removal
of form work with all cost including cost of labour, shuttering, moulds, T&P, plants, materials (excluding cement and
steel) etc. complete with all lead, lift, ascend, descend, crossing of track, nallah, fencing, river etc. complete job
(Reinforcement and cement will be paid separately).

Pa g e 1 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16

 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

5 11832.00 cum 6625.62 78394335.84 AT Par 78394335.84

Description:- Providing RCC M-25/30 in foundation and substructure of bridges and structures etc. as per
approved drawing or as directed by the Engineer-in-charge with 20mm graded crushed stone aggregate, coarse
5 sand, fixing and removing form work and curved including bailing out water if required with all leads, lifts, ascend &
descend, Xing of road, track, bund channel, fencing with all labour and materials including as per plan,
specification & as per direction of engineer in charge. (Cement & steel reinforcement will be paid separately). Note:
The concrete shall be controlled concrete produced using automatic batching plant. 2. The mix-portions of
incredient of concrete shall be as per approved design mis.
6 1500.00 Litre 121.07 181605.00 AT Par 181605.00
Description:- Supply and mixing the admixtures such as accelerator, retarders, grouting admixture surface
retarders, super plasticizer of approved quality with contractor tools & plants, labour and material including loading,
6 unloading, lead, lift, descent, taxes, royalty, freight, incidental charges etc. complete as per specification and as
directed by engineer in charge. Admixtures shall be confirmed to IS;9103-1979 and shall be provided from
recognized manufacturers such as approved by engineer in charge. Payment shall be made consumed quantity
only.
7 40000.00 Sqm 80.64 3225600.00 AT Par 3225600.00
7 Description:- Providing 13mm thick cement plaster in 1:6 cement sand mortar with contractor's own materials,
labour, plants & equipments complete as per N.E. Railway standard specification. (Cement will be paid separately).
8 2000.00 cum 5112.54 10225080.00 AT Par 10225080.00
Description:- Brick work with well burnt bricks in superstructure with in cement and coarse sand mortar 1:6 with
8
contractor's own materials plants & equipments complete as per N.E. Railway standard specification. (Cement will
be paid separately).
9 8000.00 cum 5285.91 42287280.00 AT Par 42287280.00

9 Description:- Brick work with well- burnt bricks in foundation and plinth with coarse sand and cement mortar 1:4
with contractor's own materials, plants and equipment complete excluding supply of cement. (Cement will bepaid
separately).
10 i 300.00 cum 558.49 167547.00 AT Par 167547.00

10 Description:- Dismantling cement concrete/RCC/Brick work in lime or Cement mortar & Stone Slab in foundation,
superstructure with all labour & materials including disposal of surplus materials with all lead, lift, descend,
Crossing of track, nallah, river complete as directed by the Engineer-in-charge. (i) Brick work
10 ii 1050.00 cum 596.10 625905.00 AT Par 625905.00
Description:- Dismantling cement concrete/RCC/Brick work in lime or Cement mortar & Stone Slab in foundation,
10 superstructure with all labour & materials including disposal of surplus materials with all lead, lift, descend,
Crossing of track, nallah, river complete as directed by the Engineer-in-charge.(ii)Line concrete/cement concrete (
this quantities includes the dismantling related to P.Way.)
10 iii 50.00 cum 777.50 38875.00 AT Par 38875.00

10 Description:- Dismantling cement concrete/RCC/Brick work in lime or Cement mortar & Stone Slab in foundation,
superstructure with all labour & materials including disposal of surplus materials with all lead, lift, descend,
Crossing of track, nallah, river complete as directed by the Engineer-in-charge.(iii)RCC
11 71910.00 Sqm 114.64 8243762.40 AT Par 8243762.40
Description:- Extra for vacuum dewatering in fresh concrete work by leveling with double framed screed vibrator,
11 excess water to be removed through vacuum pump with bottom and top filter mat duly selling the edges all around,
finishing with power floater and power trawler to obtain the hard surface with all and lift and other incidental works
etc.
12 71910.00 Sqm 160.47 11539397.70 AT Par 11539397.70

12 Description:- Providing and spreading non metallic floor hardener minimum @ 4.5 kg/sqm in top layer of concrete
(as per manufactures specifications & approved by Engineer-in-charge). Nothing extra shall be payable in
manufacturer specifies extra quantity.

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule A2-Schedule 9606596.38
Below/Par
13 20400.00 cum 131.56 2683824.00 AT Par 2683824.00
Description:- Earthwork in excavation in foundation, flooring & cutting in formation including plumbing, levelling,
13 dressing floors and seating soaring where required in all classes & condition of soil including wet soil with pumping
or bailing out water where required rehandling and disposal of surplus earth as directed with all lead, lift, crossing
of track, nallah, channel, river fencing etc. complete as directed by Engineer-in- charge.
14 400.00 Sqm 168.63 67452.00 AT Par 67452.00

14

Pa g e 2 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16

 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

14
Description:- Providing clean vertical joints 12mm thick between walls, with a layers of thermocol supplied by
contractor.
15 40000.00 Sqm 56.91 2276400.00 AT Par 2276400.00
15 Description:- Distempering two coat with oil bound washable distemper (make - Berger /Asian/ Nerolac or
equivalent ) over one coat of primer.
16 120.00 cum 8025.38 963045.60 AT Par 963045.60
Description:- RCC as per design mix of M-25/M-30/M-35 in Foundation of overhead tank foundation ring beam as
per approved plan for all heights and depths including cost of shuttering soft ending, cutting, hooking, bending
16 uncoiling, straightening, placing and keeping and maintaining in position all the reinforcement including cost of
binding wire, mechanical mixer/ vibrator bailing out, pumping out water and when necessary curing and finishing
the exposed surface RCC curing for specified period all labour and material as complete job. (Cement and steel
will be paid separately). Note: (i) The concrete shall be controlled concrete produced using automatic batching
plant. (ii) The proportion of various material of concrete shall be as per design mix.
17 150.00 cum 10388.76 1558314.00 AT Par 1558314.00
Description:- RCC as per design mix of M-25/M-30/M-35 in column bracing and stair case and landing as per
approved plan for all heights and depths including pumping out water and when necessary, including cost of
17 centring, shuttering. Only steel or plywood shuttering will be used scaffolding cutting, hooking, bending, binding
including, straightening,placing and keeping in position all the reinforcement including cost of binding wire,
mechanical mixer/ vibrator rendering and finishing the exposed surface RCC. Curing for specified period all labour
and material as a complete job. (Cement and steel will be paid separately).
18 120.00 cum 12780.28 1533633.60 AT Par 1533633.60
Description:- RCC as per design mix of M-25/M-30/M-35inRCC bottom and top ring beams bottom and top dome
slab cylindrical portion wall conical slab and ventilator slabs etc. including foot step in partition wall for the over
height and depths including providing and fixing M.S. clamps for C.I. pipe and making holes making fixing
18 arrangements for steel ladder and lightening conductor including cost of centring, shuttering (only steel or plywood
shuttering will be used) scaffolding, cutting, hooking and binding and keeping and maintaining in position, all the
reinforcement including cost of binding wire mechanical mixer/ vibrator rendering and finishing the exposed
surface of RCC. Curing for specified period and with all labour and material as a complete job. (Cement and steel
will be paid separately).
19 3.00 Job 23879.06 71637.18 AT Par 71637.18
19 Description:- Applying and finishing the structure with water proof cement paint two coats of approved quality as
per direction of Engineer-in-charge at site with all labour and materials work related to the job up to all height.
20 1000.00 Metre 446.97 446970.00 AT Par 446970.00
Description:- "Providing barricading with the help of fencing along the running track where the work is to be done
in close vicinity of the track. The fencing shall be minimum 1.5m high with MS angle posts 1.8m height of size
50x50x6mm provided with hooks etc. placed every 2.0m apart, embedded in cement concrete (1:2:4) blocks of
size 0.23 x 0.23 x 0.23m and every 15th post (or nearer, if there is abrupt change of ground slope), last but Jone
end post and corner post shall be strutted on both sides and end post one side only and struts embedded in
cement concrete (1:2:4) block of size 0.23x0.23x0.23 m, provided with 5 horizontal lines and two diagonals of G.I.
20 barbed wire 9.38 kg/100m (min) between the two posts fitted and fixed with G.I. staples driven into the posts
including 2 bands (red and white) 300 mm long shall be painted with water bound paints on the ballies from top
and two bands (100 mm apart) of yellow aluminous top of width 50 mm shall be pasted on top white band. The
rate includes cost of all materials including cement. After execution of all works requiring safety fencing in particular
stretch, the fencing shall be removed with the approval of the Engineer-in-charge and formation shall be repaired
to its profile and released materials will be contractor's property. NOTE-(a)- The work under this item shall be
completed as per direction of site-in- charge in a time bound manner. (b)-85% payment shall be paid after
execution of works and balance 15% of this item shall be released after maintaining it successfully vide item 2 and
removing the barricading after the instruction of Engineer-in-Charge.
21 1000.00 Metre 5.32 5320.00 AT Par 5320.00
Description:- "Maintaining including watch & ward and repairs of the barricading provided as per item no. 1
including cost of all contractor's men, materials, tools and plants required in this regard. Note: 1. The payment will
21 be made for the length maintained during the month at the rate mentioned here till the barricading is required to be
maintained at site as per directions of the Engineer. However, a deduction of double the rate mentioned here shall
be made for a km, if any length of barricading is found to be missing/damaged/in- effective in that km, before the
Engineer has directed for its removal. 2. The work under this item shall be executed only after completion of work
in particular block section as directed by site-in-charge."

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule A3-Schedule 34388182.50
Below/Par
22 34500.00 Kg 107.73 3716685.00 AT Par 3716685.00

22
Pa g e 3 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16
 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

22
Description:- Supplying & fixing steel door/ window/ grill as per approved drawing or as per direction of site
engineer (Window will be fully glazed shutters, glazing work will be paid separately as per USSR 2012).
23 350.00 Kg 46.22 16177.00 AT Par 16177.00
Description:- Providing and adding water proofing compound of approved make namely FOSROC, SIKA, CICO
23
et. & cement concrete mix as per direction of the Engineer in-charge as a complete job. Note- Water proofing
compound to be got approved before use by the Engineer in charge.
24 3200.00 Sqm 2487.43 7959776.00 AT Par 7959776.00
Description:- Providing and laying vitrified tiles (size 600x 600x 8.5mm ) Kazaria/Johnson or similar make in
24
flooring and wall laid on 19mm thick bed of cement mortar 1:3 and jointed with white cement slurry mixed with
pigments to match shade of the tiles including cleaning etc. complete in all respects.
25 1500.00 Sqm 437.70 656550.00 AT Par 656550.00

25 Description:- Providing and fixing in position 25mm thick (approx) cement concrete cultured precast chequered
tiles of approved size and pattern laid on 20mm thick 1:4 cement sand mortar bed with joint filled with slurry of
same shade including all labour and materials etc. as a complete job. Note- (Grey cement will be paid separately)
26 2000.00 Man-Days 546.72 1093440.00 AT Par 1093440.00

26 Description:- Supply of skilled worker for keeping watch on ongoing works and maintaining progress of works,
assisting in taking and calculating levels, ranging, surveying, toe marking of earth fill etc. ranging, surveying, toe
marking of earth fill etc. (For "Y" Area)
27 3000.00 Man-Days 471.19 1413570.00 AT Par 1413570.00
27 Description:- Supply of unskilled worker for assisting in monitoring of quality control, track safety , act as look out
man for officials & staff working in running line , assisting in giving progress to maintainer etc. (For "Y" Area)
28 300.00 Sqm 2564.43 769329.00 AT Par 769329.00
28 Description:- Supplying and fixing acid proof tiles 10mm thick complete as per approved plan or as directed by
the Engineer-in- charge.
29 750.00 Sqm 4219.59 3164692.50 AT Par 3164692.50
Description:- Providing, fitting and fixing three colour anodized aluminium sliding window made of 2.5'' X
29 1.5''X1.5mm(thick) rectangle Aluminium section for chowkhat, and 1.5''X 0.75''X1.5mm (thick) rectangle Aluminium
section for shutters made of Hindolco, Zindal or equivalent as approved by Engineer in charge fully glazed with
5.5mm thick plate glass and with Maruti lock etc. complete with all materials and labours as per designed drawing
and size as approved by Engineer in charge and making good after fixing.
30 700.00 Kg 298.63 209041.00 AT Par 209041.00
30 Description:- Providing and fixing powder quoted aluminium grill 4mm thick as per approved pattern in aluminium
window as per direction of site engineer including cost of steel screw complete in all respect.
31 15000.00 Sqm 947.57 14213550.00 AT Par 14213550.00
Description:- Supplying & fixing super tech or similar single skin Hi-Rib profiled sheeting 930-1020 mm cover
width 28-32mm crests @ 186-333m C/C manufactured out of 0.45mm BMT (Base metal thickness) Hi- tensile
31 Galvalume/ zincalume steel. The sheets shall have wide panes with 2-3 nos. stiffening for effective water shedding
and special male/female ends with full return legs on side laps for purring supports and anti capillary flute in side
lap. The sheets shall have a hot dip metallic zinc aluminium alloy coating (150gms/ Sqm zinc (45% ) Alum (55% )
coating mass total on both sides AZ-150 or equivalent as per (As 1397-1993) minimum 550 Mpa yield strength
with SMP coating (minsilicone content 30% -50% ) or super polyester SRW quality paint coat or approved colour
32 400.00 Sqm 2938.43 1175372.00 AT Par 1175372.00
32 Description:- Supplying & fixing 30mm thick flush door shutter Decorative type core of block board. Construction
with frame of Ist class hard wood and both side decorative lamination of approved shade.

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule A4-Schedule 10784739.20
Below/Par
33 2000.00 Each 1257.43 2514860.00 AT Par 2514860.00
33 Description:- Manufacturing, supplying & fixing of 28mm dia and 1250mm long MS holding down bolts with nuts &
anchor channel as per drawing with complete job (with contractors steel)
34 3000.00 Metre 2628.76 7886280.00 AT Par 7886280.00

34 Description:- Supplying, laying and jointing G.I. Pipe line 150mm dia for side filling, watering arrangement along
with provision of G.I. Tee at distance of CC- 3300mm between 2 Two Tee and G.I. Flange 150mm dia to be
provided as per plan with all fitting required for works.
35 3.00 Each 4891.83 14675.49 AT Par 14675.49

35
Pa g e 4 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16
 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

35
Description:- Providing and fixing manhole cover in top dome with 3mm thick MS plate of size to be approved by
the Engineer including of welding with 40x5mm MS plate with lifting hook including of MS frame of angle of size
40x20x5mm hole approved plan including cost of synthetic enamel paint of approved quality and shade. All labour
and material as a complete job.
36 3.00 Each 22964.06 68892.18 AT Par 68892.18

36 Description:- Supplying and fixing water level indicator with floats teakwood gauge board pulley wire etc. as per
approved plan for all height and depths including cost of priming coat of red lead and painting two coats with
synthetic enamel paint of approved quality and shade all labour and material as a complete job.
37 3.00 Each 31846.39 95539.17 AT Par 95539.17
Description:- Providing and fixing lightening conductor 22 mm x3mm copper strip with projection fixed to the
37
centre of the top slab of the ventilator with aluminium down conductor in accordance with IS Specifications
including all heights and earthing at 10mm below including depth all labour and material as a complete job.
38 i 12.00 Each 5216.63 62599.56 AT Par 62599.56
38 Description:- Supplying, fitting and fixing CI sluice valve of IS approved quality for pipes with complete job
including making hole in flanges where necessary including rubber gasket etc. complete. (i)100mm dia.
38 ii 24.00 Each 5912.20 141892.80 AT Par 141892.80
38 Description:- Supplying, fitting and fixing CI sluice valve of IS approved quality for pipes with complete job
including making hole in flanges where necessary including rubber gasket etc. complete. (ii)150 mm dia

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule A5-Schedule 16692745.38
Below/Par
39 3.00 Job 26538.07 79614.21 AT Par 79614.21

39 Description:- Construction Geophysical survey of two or more locations each by electrical logging method to
decide the best location of tube well depending on water bearing strata for an approximately yield of
25000Gallon/hour
40 225.00 Metre 2130.09 479270.25 AT Par 479270.25
40 Description:- Drilling including ramming 675/500 mm dia bore hole from 0 to 75 Meters in all types of soil
including sand, stone rocks boulder formation etc. with contractors mechanical rib.
41 i 525.00 Metre 2120.46 1113241.50 AT Par 1113241.50
41 Description:- Drilling including ramming 500 mm dia Hole in all types of soils including sand, stone, rock boulder
formation etc. with contractors mechanical rib. (i)From 75 to 250Metres
41 ii 150.00 Metre 869.77 130465.50 AT Par 130465.50
41 Description:- Drilling including ramming 500 mm dia Hole in all types of soils including sand, stone, rock boulder
formation etc. with contractors mechanical rib. (ii)From 250 to 300 Metres
42 i 150.00 Metre 5673.19 850978.50 AT Par 850978.50
Description:- Leveling and fixing in position of the tube well assembly according to slotted pipe location, discharge
42
and installation instructions with 8 mm thick pipe as per following details. (i)Housing pipe 350mm dia. As per
IS:4270-ERW
42 ii 600.00 Metre 3339.42 2003652.00 AT Par 2003652.00

42 Description:- Leveling and fixing in position of the tube well assembly according to slotted pipe location, discharge
and installation instructions with 8 mm thick pipe as per following details. (ii)Plain pipe of 219/200 mm. Dia as
perIS:4270-ERW.
42 iii 150.00 Metre 3316.12 497418.00 AT Par 497418.00
Description:- Leveling and fixing in position of the tube well assembly according to slotted pipe location, discharge
42
and installation instructions with 8 mm thick pipe as per following details. (iii)Slotted screen 219/200mm dia as per
IS:4270-EWR.
42 iv 3.00 Each 3764.22 11292.66 AT Par 11292.66
Description:- Leveling and fixing in position of the tube well assembly according to slotted pipe location, discharge
42
and installation instructions with 8 mm thick pipe as per following details. (iv)Supplying and fixing 350 /219 mm dia
MSERW reducer as per IS:4270
43 150.00 cum 4214.50 632175.00 AT Par 632175.00
43
Description:- Supplying of pea gravel 2 mm to 4 mm size for packing of tube well as perIS:4270-1967.
44 900.00 Metre 124.17 111753.00 AT Par 111753.00
44
Description:- Packing of tube well with pea gravel.
45 3.00 Each 757.48 2272.44 AT Par 2272.44
45
Description:- Supplying and fixing of bail plug. (200mm dia)

Pa g e 5 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16

 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

46 150.00 Each 689.54 103431.00 AT Par 103431.00

46
Description:- Supplying and fixing of central guides (200/350mm dia)
47 3.00 Each 3811.04 11433.12 AT Par 11433.12
47
Description:- Supplying and fixing of holding/housing clamps.
48 3.00 Each 1474.90 4424.70 AT Par 4424.70
48
Description:- Supplying and fixing of well cap.
49 i 150.00 Hour 3013.43 452014.50 AT Par 452014.50
49 Description:- Development of tube well with compressor andO.P. Unit. (i) By air compressor of 600 PSI
compression.
49 ii 150.00 Hour 1172.86 175929.00 AT Par 175929.00
49
Description:- Development of tube well with compressor andO.P. Unit.(ii) By Over pumping unit.
50 3600.00 Sqm 2787.05 10033380.00 AT Par 10033380.00
Description:- Supplying and fixing Granite Stone slab minimum 18mm thick of approved quality and shade in
50 Walls, Doda Pillar & Counters laid over average 13mm thick mortar (1:3) and jointed with grey/while cement slurry
mixed with pigment to match the shade of slab, slabs to be machine cut on all ledges to true shape and approved
size Including rubbing, polishing complete job. (Grey cement shall be paid separately)

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule A6-Schedule 109627427.50
Below/Par
51 5300.00 cum 2459.84 13037152.00 AT Par 13037152.00
Description:- Construction of granular sub-base by providing coarse graded material (crushed stone with local
51 sand) spreading in uniform layers with motor grader on prepared surface, mixing by mix in place melnod with
rolavator at OMC., and compacting with vibratory roller to achieve the desired density, complete as per clause no.
401 of MORTH
52 7900.00 cum 3724.48 29423392.00 AT Par 29423392.00
Description:- Providing laying spreading and compacting graded crushed stone aggregate to Wet Mix Macadam
52 specification including premixing the Material with water at OMC in wer-mix- plant, carriage of mixed Material by
lipper to sile, laying in uniform layers with paver in sub base/ base course on well prepared surface and
compacling with vibrato yismooth wheeled rollers to achieve the desired density as per MORT& H specification no.
406
53 43000.00 Sqm 11.65 500950.00 AT Par 500950.00

53 Description:- Providing and applying tack coal (belove BM and SDBC work) with bitumen emusion (MS) using
emulsion pressure distributor at the rate of 0.20 kg per sam on the prepared bituminous/granular surface cleaned
with mechanical broom and air compressor As per MORT&H specification no. 503
54 2100.00 cum 9785.15 20548815.00 AT Par 20548815.00
Description:- Providing and laying Bituminous macadum Grade-II 75 mm thick with 100-120 TPH hot mix plant
54 producing an average out put 75 tonnes per hour using crushed aggregate(Dalla quarry) of specified grading
premixed with bituminous binder with Bitumen 60/70 grade, transported at site, laid over a previously prepared
surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to
achieve the desired compaction. asd per MORT&H specification 504
55 1150.00 cum 12425.59 14289428.50 AT Par 14289428.50
Description:- Providing and laying Semi Dense Bituminous concrete Grade-II, 25 mm thick with 100-120 TPH
batch type HMP producing an average output of 75 tonnes per hour using approved crushed aggregate (Dalla
55 quarry) of specified grading premixed with bituminous binder(CRMB-55 grade) @ 5.00 percent of mix and filler,
transporting the hot mix to work site, laying with a hydrstatic paver finisher with sensor control to the required
grade, level and alignment, rolling with smooth wheel, vibratory and tandem rollers to achieve the desired
compaction as per MORT&H specification clause no. 508 complete in all respect
56 40000.00 Sqm 528.68 21147200.00 AT Par 21147200.00
56 Description:- PROVIDING PREMIXED CARPET 40 mm. Thick over a lack coat with hot bitumen and a seal coal
10 mm thick with premixed sand including rolling complete (bitumen to be supplied by contractor).
57 36000.00 Metre 136.74 4922640.00 AT Par 4922640.00

57 Description:- Making cutting arrangement for expansion joint with diamond cutter of approved manufacture with
skilled workmanship to provide sharp degree cut complete job. Nothing extra will be paid what so ever case may
be.
58 2500.00 cum 2303.14 5757850.00 AT Par 5757850.00

58

Pa g e 6 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16

 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

58
Description:- Providing and laying water. bound macadam with specified stone aggregate, stone screening and
binding material including creening, sorting, spreading to template and consolidation with power road roller of 8 to
10 tonne capacity etc. complete Base course with 63mm to 45mm size including stone screening 13.2mm size

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule A7-Schedule 16229996.10
Below/Par
59 4500.00 cum 3599.37 16197165.00 AT Par 16197165.00
Description:- Providing and laying blanketing material of specifications as per RDSO guidelines for
design/Construction of formation on Indian Railway track issued vide letter no. RS/G/108/4 teavy Axle load dated
26.10.2016, using well graded granular material having Cu>7. Ce between 1 and 3. fines (passing 75 mierons)
between 3% to 10%, minimum Soaked CBR value of 25 and compacted at 100% of MDD in layers of maximum 30
cm thickness in loose state using graders and compaction using vibratory compactors, top and side dressing to
provide final formation as per designed profile. The rate shall not include compaction, which shall be paid
separately. NOTE:1) If naturally available materials do not meet the laid down specifications, the blanket material
has to be produced by mechanical process using mechanical crushing or mechanical blending method or
59 combination of these two methods as given in the Appendix-C of RDSO Guidelines and Specifications for Design of
Formation for Heavy Axle Load - 2009. The rate for this item is inclusive of the production of material by
mechanical process as per above mentioned RDSO guidelines and in case such mechanical process is not
required to be used in providing and laying of blanketing material due to availability of natural blanketing material
conforming to laid down specifications, the rate of this item shall be reduced by Rs. 250/- per cum. 2) The filter
criteria and minimum EV2 Criteria as mentioned in the guidelines of 2009 is not applicable.. 3) The rate shall
include cost of all field and laboratory tests except CBR tests which will be paid vide separate Schedule item. 4)
The Latest guidelines for Design Construction of formation on Indian Railway track, issued vide RDSO Ir. No.
RS/G/108/Heavy axle load dated 26.10.2016 shall be adopted for this item. The basic instructions (other than
those contained in the latest guidelines dated 26.10.2016) detailed in GE: G-1 of 2003 and GE:0014 of 2009 shall
continue to apply.
60 9.00 Each 3647.90 32831.10 AT Par 32831.10
60
Description:- Conducting test for determination of california bearing ratio as per IS:2720

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule A8-Schedule 193173987.71
Below/Par
61 1287.39 MT 129271.11 166422334.30 AT Par 166422334.30
Description:- Fabrication, Tranportation, Supply of various steel structure components of Foot Over Bridge & P.P.
Shelter at Khalilabad, Bhagauli, Bakhira, Mehdawal, Pasai, Khesraha & Bansi between Khalilabad-Bansi station of
Khalilabad Bahraich New Rail Line or any other station in Lucknow Division of N.E. Railway, as per drawing
'including cost of tested raw steel section conforming to IS:2062 Grade BR & all plates confirming to IS: 2062 B0 or
061 better and its transportation with contractor's own labour, materials, tools & plants, bolts, nuts, washers, rivets,
welding electrodes, welding plants, compressors, drilling machines, gas cutting equipments etc. with all leads, lifts
for fabrication with initial one coat of ready mixed paint zinc chromate priming to IS:104 followed by one coat of
ready mixed paint red oxide zinc chrome priming paint to IS:2074 and one coat of paint Aluminum to IS:2339 of
approved quality and all activities as per specification with Contractor's own arrangement for power supply and
water consumption at site.
62 1287.38 MT 19627.44 25267973.71 AT Par 25267973.71
Description:- Erection and launching of steel structures of extension Foot Over Bridge & P.P. Shelter at
Khalilabad, Bhagauli, Bakhira, Mehdawal, asai, Khesraha & Bansi between Khalilabad-Bansi station or any other
station. Specifications with contractor's own labour,materials, tools & plants, bolts, nuts, washers, welding
062 electrodes, welding plants, compressors, drilling machines, gas cutting equipments etc. including all leads, lifts,
ascends, descends required for successful completion of the entire work, as directed by the Engineer. and all
activities as per specification with Contractor's own arrangement for scaffoldings, power supply, watchman and
water consumption at site of erection. This also includes, the cost of crane, labour, fuel required for erection and
launching of fabricated FOBs as per site condition
63 1287.38 MT 1152.48 1483679.70 AT Par 1483679.70
Description:- Painting of steel structures with one finishing coat of paint aluminium conforming to IS:2339 of
063 approved quality after touching up the primer coat where ever damaged during erection with one coat of Ready
mixed paint zinc chromate priming to IS:104 followed by one coat of Ready Mixed Paint Red Oxide Zinc Chrome
priming paint to IS:2074 with contractors own paints, materials, tools, plants, consumables, scaffolding etc.

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit

Pa g e 7 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16

 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

Above/
Schedule B1-Schedule 24622080.89
Below/Par
64 77000.00 cum 84.22 6484940.00 153.67 16450347.30
Description:- USSOR/2012 item No. 013120: Earthwork in filling in embankment, guide bunds, around buried type
abutments, bridge gaps, trolley refuges, rain bunds if provided, platforms etc. with earth excavated from outside
railway boundary entirely arranged by the contractor at his own cost as per RDSO's latest guidelines and
64 specifications and special condition of contract including all leads, royalty, lifts, ascents, descents, crossing of
nallahs or any other obstructions. The rates shall include all dressing of bank to final profile, demarcation and
setting out of profile, site clearance, removing of shrubs, roots of vegetations growth, heavy grass, benching of
existing slope of old bank, all handling / re- handling, taxes, octroi and royalty etc. as a complete job. Cut trees
shall be property of railways and to be deposited in the railway godown unless specified otherwise in the Special
conditions of contract
65 81500.00 cum 13.80 1124700.00 97.83 2224994.01
Description:- USSOR/2012 item no. 013130 : Extra for mechanical compaction of earth/blanketing material filled
65 in embankment with contractor's rollers of suitable capacity, type and size to achieve specified density as per
specification, testing as per IS codes including cost of water, T&P, consumable material and all labour as a
complete job. The work is to be executed as per Latest edition of "Guidelines for Earthwork in Railway Projects"
issued by RDSO,Lucknow.
66 28500.00 cum 16.80 478800.00 150.00 1197000.00
66 Description:- USSOR/2012 item no. 012040 : Filling, watering and ramming earth in 15cm layers in floors and
foundations with surplus earth from foundations including 50m lead and 1.5m lif
68 310000.00 10 Sqm 49.00 1519000.00 45.22 2205891.80

68 Description:- item no. 014010 of USSOR/2012 Dressing Surface (average excavation or filling upto 15 cm)
including removing vegetation in all kind of soil. Payment against this item is to be made only if it is not included in
earth work item
67 4000.00 cum 437.93 1751720.00 45.22 2543847.78
067 Description:- Item no. 012050 of USSOR/2012 Supplying and filling sand in plinth and under floors including
watering, ramming, consolidating and dressing complete

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule B2-Schedule 33061602.16
Below/Par
69 10900.00 Each 1363.04 14857136.00 29.39 19223648.27
Description:- USSOR/2012 Item no. 048120:Manufacturing, supplying & fixing of pre-fabricated RCC coping
stone of size 530mm x 1125mm x 100mm thick as per top face designed and approved by site Engineer with M 30
69 grade RCC with 8 mm dia. tor steel at 150mm c/c both ways and manufactured by vibro compaction process using
jointless FRP/GRP steel moulds of required size, shape & design. The item includes cost of cement, reinforcement,
transportation etc. (Note : Under layer of cement mortar to be laid as per site conditions & should be paid for
separately)
70 1600.00 Sqm 651.20 1041920.00 22.31 1274372.35
Description:- USSOR/2012 Item no. 095013: Providing and fixing Ist quality ceramic tiles conforming to Group B-
70 III (Ceramic Wall Tiles) of IS:15622 of manufacturers approved by railway in all colours, shades, and design as
approved by the Engineer-in- Charge in skirting, risers of steps and dado over 12mm thick bed of cement mortar
1:3 (1 cemen : 3 coarse sand) including pointing in white cement mixed with pigment of matching shade
complete300x450 mm and above
71 40000.00 Sqm 55.00 2200000.00 58.69 3491180.00
71 Description:- item no.112040 of USSOR/2012 Providing and applying plaster of Paris putty of 2mm average
thickness over plastered surface to prepare the surface even and smooth complete Sqm 55.00
72 40000.00 Sqm 20.33 813200.00 45.20 1180766.40
72 Description:- item no.115060 of USSOR/2012 Applying one coat of cement primer of approved brand and
manufacture on wall surface Sqm 20.33
73 40000.00 Sqm 9.24 369600.00 45.24 536807.04
73 Description:- item no.115091 of USSOR/2012 Extra over Items for roller painting in lieu of normal brush painting if
specifically ordered Sqm 9.24
74 5100.00 Sqm 228.03 1162953.00 45.22 1688840.35
Description:- item no.091030 + 091032 of USSOR/2012 Providing hand packed dry flat brick flooring, class
74
designation 7.5 (FPS Bricks), excluding pointing with joints filled with sand over a bed of dry sand (ordinary)of
average thickness 25 mm including ramming sub grade :Flat brick Sqm 228.03
75 1400.00 Sqm 63.25 88550.00 45.22 128592.31

Pa g e 8 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16

 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

75 Description:- item no.115170 of USSOR/2012 Finishing walls with Acrylic Smooth Interior paint of required shade
on new work (Two or more coats applied @ 1.67 Itr/10 sqm over and including base coat of water proofing cement
paint applied @ 2.20 kg/10sqm Sqm 63.25
76 1600.00 Metre 110.87 177392.00 45.22 257608.66

76 Description:- item no 099060 + 099062 of USSOR/2012 Extra for providing edge moulding to 16mm to 20mm
thick marble/granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc.
complete as per design approved by the Engineer-in-Charge, Granite work metre 110.87
77 3000.00 Sqm 1181.51 3544530.00 45.22 5147366.47
Description:- item no 094070 + 094071 of USSOR/2012 Providing and fixing 10mm thick heavy duty acid and/or
77 alkali resistant factory made tiles conforming to Group V-RD series of approved make and colour using acid and/or
alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS: 4457 complete
including cost of acid/alkali resistant cement 094071 In flooring on a bed of 10mm thick mortar 1:4 (1) Appropriate
cement: 4 coarse sand) Sqm 1181.51
78 i 200.00 Sqm 455.93 91186.00 45.22 132420.31
Description:- item no 095020 + 095021 of USSOR/2012 Providing and fixing ceramic tiles conforming to IS:15622
78 of manufacturers approved by railway in all colours, shades, design and abrasion resistance class as approved by
the Engineer-in-Charge in floors and landings over 20mm thick bed of cement mortar 1:4 (1cement: 3coarse sand)
including pointing in white cement mixed with pigment of matching shade complete (i)Of Group B-II Clause 5.1 (for
abrasion resistance) of IS:15622 (Ceramic Floor Tiles) of size 300x300mm

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule B5-Schedule 22931534.13
Below/Par
79 3600.00 Metre 1806.62 6503832.00 45.22 9444864.83
Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Large diameter pipes, having thermal
79 stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes
& fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of
Engineer-inCharge. External work (higher dia) 75mm nominal outer dia. Pipes metre 1806@46>10@item
no.131120 + 131121 of USSOR/2012
80 i 300.00 Metre 117.32 35196.00 45.22 51111.63
Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &
80 cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with
one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-
Charge. Eitem no.131100 of USSOR/2012 (i)USSOR/2012 Item no. 1331101 15mm nominal outer dia. Pipes
80 ii 300.00 Metre 129.49 38847.00 45.22 56413.61
Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &
80 cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with
one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-
Charge. Eitem no.131100 of USSOR/2012 (ii)USSOR/2012 Item no. 1331102 20mm nominal outer dia. Pipes
80 iii 600.00 Metre 178.76 107256.00 45.22 155757.16
Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &
80 cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with
one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-
Charge. Eitem no.131100 of USSOR/2012 (iii)USSOR/2012 Item no. 1331103 25mm nominal outer dia. Pipes
81 i 150.00 Metre 1657.44 248616.00 45.22 361040.16

81 Description:- USSOR/2012 Item no. 133120 Providing and Laying boudle planged (Screwed/Welded)
Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 up to 500 mm dia (i)USSOR/2012
Item no. 133120+ 133121 100mm dia Ductile Iron Double Flanged
81 ii 300.00 Metre 2460.20 738060.00 45.22 1071810.73

81 Description:- USSOR/2012 Item no. 133120 Providing and Laying boudle planged (Screwed/Welded)
Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 up to 500 mm dia (ii)USSOR/2012
Item no. 133120+ 133122 150mm dia Ductile Iron Double Flanged
81 iii 1800.00 Metre 3194.24 5749632.00 45.22 8349615.59

81 Description:- USSOR/2012 Item no. 133120 Providing and Laying boudle planged (Screwed/Welded)
Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 up to 500 mm dia (iii)USSOR/2012
Item no. 133120+ 133123 200mm dia Ductile Iron Double Flanged
82 30.00 Each 2572.08 77162.40 45.22 112055.24

Pa g e 9 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16

 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

82 Description:- Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P
or S trap, 10litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to
IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever
required 151011 White Vitreous China Orissa pattern W.C. pan of size 580x440-mm with integral type foot rests
Each 2572.08 item no.151010 + 151011 of USSOR/2012
83 450.00 Each 104.60 47070.00 45.22 68355.05
83 Description:- item no.134040 + 134042 of USSOR/2012 Providing and fixing PTMT push cock of approved quality
and colour 15mm nominal size, 80 mm long. Weighing not less than 46 gms Each 104@46<10@
85 30.00 Each 2241.06 67231.80 45.22 97634.02
Description:- item no 151020 + 151021 of USSOR/2012 Providing and fixing white vitreous china pedestal type
85 water closet (European type W.C. pan) with seat and lid, 10litre low level white, P.V.C. flushing cistern with
manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including
cutting and making good the walls and floors wherever required 151021 W.C. pan with ISI marked white solid
plastic seat and lid Each 2241.06
86 6000.00 Litre 5.85 35100.00 45.30 51000.30
Description:- item no.136150 of USSOR/2012 Providing and placing on terrace/staging (at all heights)
86
polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank litre 5.85
84 3000.00 Metre 714.29 2142870.00 45.22 3111875.81
084 Description:- Item no.131150 + 131159 of USSOR/2012 Providing and fixing medium grade G.I. Pipes complete
with G.I. fittings including trenching and refilling etc. External Work, 100 mm dia. nominal bore metre 714.29

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule B6-Schedule 465219.53
Below/Par
87 2700.00 Kg 118.65 320355.00 45.22 465219.53

87 Description:- item no.222150 of USSOR/2012 Providing/ fixing/ grouting various size HTS holding down bolt in
concrete column or in other structural steel member incl. drilling holes of required size, bolts threaded at both ends
shall be fixed with proper size nuts bolts, plates, washers complete including all labour and material Kg 118.65

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule B8-Schedule 14207798.68
Below/Par
88 57000.00 Sqm 166.74 9504180.00 49.49 14207798.68
88 Description:- USSOR/2012 Item no. 231030 + 231032 : Providing & laying each layer of flat brick soling hand
packed & joints filled with ordinary sand with Jhama bricks

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule B9-Schedule 1809500.48
Below/Par
89 925.00 Hour 615.89 569698.25 45.22 827315.80
Description:- item no.021510 of USSOR/2012 Hiring of JCB Machine (in good working condition) for leveling and
89 dressing ground / dismantling structures including disposal of debris through dumpers etc. with contractor's labour,
JCB machine, machine operator, fuel, etc. The contractor shall arrange road permit for vehicle for all the States of
operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. Payment
shall be made for actual working hours at site.
90 18.00 Each/month 25704.00 462672.00 45.22 671892.28
Description:- item no.021430 of USSOR/2012 Hiring and operating Multi-Utility vehicle of loading capacity one MT
with sitting capacity of 4/6 persons, 4 strokes, 4 cylinders engine, factory-built metal body, cargo, box type or
90 passenger cabin type or both (with 24 hours availability), including cost of fuel, lubricants, major/minor repairs,
salary of driver, toll tax, all other tax complete, operation and maintenance including running upto 1200 km in a
month. The vehicle shall run on pucca, kutcha road and along the track. The contractor shall arrange road permit
for vehicles for all the States of operation, as per instructions of engineer in charge and vehicle shall not be more
than three years old
91 10000.00 Kilometre 21.37 213700.00 45.20 310292.40
91 Description:- item no.021440 of USSOR/2012 Extra over item no. 021430 for every additional km or part thereof
over 1200 km in a month

Pa g e 10 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16

 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule B10-Schedule 5370681.73
Below/Par
92 5000.00 Kg 711.65 3558250.00 22.31 4352095.58
Description:- USSOR/2012 Item no.083050: Fabricating, supplying & installing stainless steel railings for
staircases, balconies, FOBs, Enquiry/ Reservation complex etc., made of SS 304 Grade stainless steel, laser cut /
92 water jet cut (no shearing), polished with Automatic round/flat polishing machine to get a uniform hairline finish. All
parts shall be connected to each other with the help of prescribed size CNC made solid connectors, countersunk
screws. Welding should be finished ensuring that no welding marks are visible and assembly is mounted on floor
with the help of dash fasteners. Railings shall be fabricated as per approved drawings by engineer-in- charge.
Manufacturer shall submit maintenance manual and basic material test report for grade certification.
93 5400.00 Kg 88.81 479574.00 45.22 696437.36
93 Description:- item no. 081420 + 081423 of USSOR/2012 Providing and fixing hand rail by welding etc. to steel
ladders railing, balcony railing and staircase railing including pplying a priming coat of approved steel primer
94 1500.00 Metre 147.89 221835.00 45.22 322148.79

94 Description:- item no 108160+108162of USSOR/2012 Providing and fixing on wall face unplasticised - Rigid PVC
single socketed rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS:
5382 leaving 10mm gap for thermal expansion. 110mm dia. metre 147.89

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule B12-Schedule 697684.00
Below/Par
Lump Sum 520000.00 34.17 697684.00
95 Description :- Any other item of works not covered by the above items, based on NER/ USSOR /2012 edition with
all corrections up-to-date.

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule C 1-Schedule 90381234.00
Below/Par
96 10900.00 MT 7929.12 86427408.00 AT Par 86427408.00
96
Description:- USSOR/2012 Item no. 252060: Pozzolana Portland Cement.
97 450.00 MT 8786.28 3953826.00 AT Par 3953826.00
97
Description:- USSOR/2012 Item no. 252040:Ordinary Portland Cement grade -43.

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule C 2-Schedule 60944835.00
Below/Par
98 700.00 MT 87064.05 60944835.00 AT Par 60944835.00
98 Description:- USSOR/2012 Item no. 045010 and 045014: Supplying Reinforcement R.C.C. work including
strengthening, cutting, bending, placing in position and binding all complete. High yield strength deformed bars.

3. ITEM BREAKUP

No item break up added

4. ELIGIBILITY CONDITIONS

Important : All documents uploaded and remarks / confirmation entered by the bidders against any eligibility condition
shall be opened as part of technical bid only

Special Financial Criteria

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading

Pa g e 11 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16

 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

Financial Eligibility Criteria: The tenderer must have minimum average annual
contractual turnover of V/N or "V" whichever is less, where V= Advertised value of the
tender in crores of Rupees N= Number of years prescribed for completion of work for
which bids have been invited. The average annual contractual turnover shall be
calculated as an average of "total contractual payments" in the previous three financial
years, as per the audited balance sheet. However, in case balance sheet of the previous
year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year
shall be considered for calculating average annual contractual turnover. The tenderers
shall submit requisite information as per Annexure-2 of Chapter-3, along with copies of
Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from
Chartered Accountant duly supported by Audited Balance Sheet. 10.3 Bid Capacity: The
tender/technical bid will be evaluated based on bid capacity formula detailed in
Annexure-3 of Chapter-3. The statement of existing commitments and balance amount
Allowed
1 of ongoing works should be submitted as per Annexure-E attached with tender No No
(Mandatory)
document. 10.4 No Technical and Financial credentials are required for tenders having
value up to Rs 50 lakh. 10.5 Credentials if submitted in foreign currency shall be
converted into Indian currency i.e., Indian Rupee as under: The conversion rate of US
Dollars into Rupees shall be the daily representative exchange rates published by the
Reserve Bank of India or entity authorized by RBI to do so for the relevant date or
immediately previous date for which rates have been published. Where, relevant date
shall be as on the last day of month previous to the one in which tender is invited. In
case of any other currency, the same shall first be converted to US Dollars as on the
last day of month previous to the one in which tender is invited, and the amount so
derived in US Dollars shall be converted into Rupees at the aforesaid rate. The
conversion rate of such currencies shall be the daily representative exchange rates
published by the International Monetary Fund for the relevant date or immediately
previous date for which rates have been published.

Special Technical Criteria

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or
substantially completed any of the following during last 07 (seven) years, ending last day
of month previous to the one in which tender is invited: (i)Three similar works each
costing not less than the amount equal to 30% of advertised value of the tender, or
(ii)Two similar works each costing not less than the amount equal to 40% of advertised
value of the tender, or (iii)One similar work each costing not less than the amount equal
to 60% of advertised value of the tender. (b) (i) In case of tenders for composite works
(e.g. works involving more than one distinct component, such as Civil Engineering
works, S&T works, Electrical works, OHE works etc. and in the case of major bridges -
substructure, superstructure etc.), tenderer must have successfully completed or
substantially completed any of the following categories of work(s) during last 07 (seven)
years, ending last day of month previous to the one in which tender is invited: (i)Three
similar works each costing not less than the amount equal to 30% of advertised value of
each component of tender, or (ii)Two similar works each costing not less than the
amount equal to 40% of advertised value of each component of tender, or (iii)One similar
work each costing not less than the amount equal to 60% of advertised value of each
component of tender. Note for b (1): Separate completed works of minimum required
values shall also be considered for due fulfilment of technical eligibility criteria for
different components. (b)(2) In such cases, what constitutes a component in a Allowed
1 No No
composite work shall be clearly pre-defined with estimated tender cost of it, as part of (Mandatory)
the tender documents without any ambiguity. (b)(3) To evaluate the technical eligibility of
tenderer, only components of work as stipulated in tender documents for evaluation of
technical eligibility, shall be considered. The scope of work covered in other remaining
components shall be either executed by tenderer himself if he has work experience as
mentioned in clause 7 of the Standard General Conditions of Contract of or through
subcontractor fulfilling the requirements as per clause 7 of the Standard General
Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor,
with prior approval of Chief Engineer in writing. However, if required in tender documents
by way of Special Conditions, a formal agreement duly notarised, legally enforceable in
the court of law, shall be executed by the main contractor with the subcontractor for the
component(s) of work proposed to be executed by the subcontractor(s), and shall be
submitted along with the offer for considering subletting of that scope of work towards
fulfilment of technical eligibility. Such subcontractor must fulfil technical eligibility criteria
as follows: The subcontractor shall have successfully completed at least one work
similar to work proposed for subcontract, costing not less than 35% value of work to be
subletted, in last 5 years, ending last day of month previous to the one in which tender is
invited through a works contract.Similar nature of work means: - "Execution of framed
building structure work"

Pa g e 12 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16

 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

Bidders shall confirm and certify on the behalf of the tenderer including its constituents as under:

S.No. Description
1 I/we the tenderer (s) am/are signing this document after carefully reading the contents.
2 I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have
verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the
3
tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment
of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and
4
attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and
5
same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully
6
responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt.
7 of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the
partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for
evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract
8
including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our
offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the
award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and
9
Performance guarantee and may also lead to any other action provided in the contract including banning of business for a
period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India
and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent
10
Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of
valid registration by the competent authority is enclosed)

Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.

S.No. Description
Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. Please
submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the
1 certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to
summary rejection of your offer.
( Click here to download the Format of Self Certification)

5. COMPLIANCE

Important : All documents uploaded and remarks / confirmation entered by the bidders against any compliance
condition shall be opened as part of technical bid only.

Check Lst

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading

Pa g e 13 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16

 CAO-C-NER-ENGG/NORTH EASTERN RLY
TENDER DOCUMENT
Tender No: DYCE-CON-G-GKP-14-2024 Closing Date/Time: 24/09/2024 15:00

History Sheet of tenderer as per proforma given in Annexure -A (ii)Details of

construction machineries, tools and plants, vehicle etc. available on hand and
proposed to be utilised in work as per Proforma given in Annexure-B.
(iii)Details of technical and other personnels available on hand and proposed
to be engaged as per Proforma given in Annexure-C (iv) Details of works
completed during previous seven financial years and current year by the
tenderer (s) as per Proforma given in Annexure-D. (v) Details of works in
hand/progress of the tenderer(s) as per Proforma given in Annexure-E.
(vi)Declaration regarding association of railway officer(s) with tenderer(s) as
1 No No Not Allowed
per Proforma given in Annexure-F (vii) List of court cases during previous
three years as per Proforma given in Annexure-G. (viii) List of arbitration cases
during previous three years as per Proforma given in Annexure-H. (ix)Broad
plan of execution of this work within the stipulated completion period as per
Proforma given in Annexure-I. (x) Other credentials/facilities of the
firm/contractor in Annexure-J. (xi) Declaration regarding visiting site of the
work Proforma as given in Annexure-K (xii) Constitution of Firm, Proforma as
given in Annexure-L. (xiii)Details of Real Time Gross Saving (RTGS)/National
Electronic Fund Transfer (NEFT) Proforma as given in Annexure-M.

Commercial-Compliance

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Please enter the percentage of local content in the material being offered.
Please enter 0 for fully imported items, and 100 for fully indigenous items. The Allowed
1 No Yes
definition and calculation of local content shall be in accordance with the Make (Optional)
in India policy as incorporated in the tender conditions.

Undertakings

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
I/ We have visited the works site and I / We am / are aware of the site
1 No No Not Allowed
conditions.

6. Documents attached with tender

S.No. Document Name Document Description

1 DOCdyceconggkp14.pdf Tender Document

This tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by
Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no.
2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017 and amendments/ revisions thereof.

As a Tender Inviting Authority, the undersigned has ensured that the issue of this tender does not violate provisions of
GFR regarding procurement through GeM.

Signed By: RAVINDER MEHRA

Designation : Dy.CE/Con/General

Pa g e 14 o f 14 Ru n Da te/Time: 0 3/0 9 /2 0 2 4 14:12 :16