Type 57B/58B/58U

ELASTOMER O-RING SEALS

Technical Specification

A – Face/Primary Ring
B – Seat/Mating Ring
C – O-ring
D – Anti-X Ring
E – Snap Ring
F – Spring
G – Disc
H – Retainer G
D

H
F
C

Product Description Performance Capabilities

The Type 57B and 58B are hydraulically balanced, multi- • Temperature: –40°F to +500°F/–40°C to +260°C
spring DIN 24960/EN 12756 seals. The Type 58U is an unbal- (depending on materials used)
anced multispring DIN24960/EN12756 seal.They are versatile • Pressure: Type 57B/58B: up to 900 psi(g)/62 bar(g)
designs using components common to other O-ring and Type 58U: up to 250 psi(g)/17 bar(g)
wedge type seals. They allow easy repair, reduce inventory
• Speed: up to 5000 fpm/25 m/s
and permit a simple conversion to unbalanced or wedge
seals.
• For use in general and high pressure sealing duties, includ-
ing chemical processing, refinery and petro-
chemical plants.
• Complies with International Standard ISO 3069,
European Standards EN 12756, DIN 24960, and BS
5257: 1975. Also comply with API 610 specifications.

Design Features
• 57B/58B has hydraulically balanced seal face giving lower
face loading at high pressure
• Multiple spring arrangement ensures even loading
of seal face.
• 57B accepts a maximum axial movement of
0.118"/±3.0mm
 Type 57B/58B/58U
ELASTOMER O-RING SEALS
Technical Specification

Type 58U Typical Arrangement

For ease of installation, the lead-in edge of the

shaft or sleeve should be chamfered as shown.

D3

D4 D1

L3
Alternative method of drive. Pin to be press
L1K* fit in driving collar or impeller, and to engage
in seal retainer as shown.

Type 58U Dimensional Data (mm)

Seal Size Seal Size
(mm) Code D1h6 D3 D4 D5 D6 L1(K)* L3 L45
14 0140 14 24 26 18.4 2.5 35.0 23.0 4.0
16 0160 16 26 28 20.4 2.5 35.0 23.0 4.0
18 0180 18 32 34 24.5 4.0 37.5 24.0 4.0
20 0200 20 34 36 26.5 4.0 37.5 24.0 4.0
22 0220 22 36 38 28.5 4.0 37.5 24.0 4.0
24 0240 24 38 40 30.5 4.0 40.0 26.7 4.0
25 0250 25 39 41 31.5 4.0 40.0 27.0 4.0
28 0280 28 42 44 34.5 4.0 42.5 30.0 4.0
30 0300 30 44 46 36.5 4.0 42.5 30.0 4.0
32 0320 32 46 48 38.5 4.0 42.5 30.5 4.0
33 0330 33 47 49 39.5 4.0 42.5 30.5 4.0
35 0350 35 49 51 41.5 4.0 42.5 30.5 4.0
38 0380 38 54 58 45.0 4.0 45.0 32.0 4.0
40 0400 40 56 60 47.0 4.0 45.0 32.0 4.0
43 0430 43 59 63 50.0 4.0 45.0 32.0 4.0
45 0450 45 61 65 52.0 4.0 45.0 32.0 4.0
48 0480 48 64 68 55.0 4.0 45.0 32.0 4.0
50 0500 50 66 70 57.0 4.0 47.5 34.0 4.0
53 0530 53 69 73 60.0 4.0 47.5 34.0 4.0
55 0550 55 71 75 62.0 4.0 47.5 34.0 4.0
58 0580 58 78 83 67.5 5.5 52.5 39.0 5.5
60 0600 60 80 85 69.5 5.5 52.5 39.0 5.5
63 0630 63 83 88 72.5 5.5 52.5 39.0 5.5
65 0650 65 85 90 74.5 5.5 52.5 39.0 5.5
68 0680 68 88 93 77.5 5.5 52.5 39.0 5.5
70 0700 70 90 95 79.5 5.5 60.0 45.5 5.5
75 0750 75 95 104 83.5 5.5 60.0 45.5 5.5
80 0800 80 104 109 89.5 5.5 60.0 45.0 5.5
85 0850 85 109 114 94.5 5.5 60.0 45.0 5.5
90 0900 90 114 119 99.5 5.5 65.0 50.0 5.5
95 0950 95 119 124 104.5 5.5 65.0 50.0 5.5
100 1000 100 124 129 109.5 5.5 65.0 50.0 5.5
NOTE: Dimensions apply to all seal and seat types unless otherwise indicated.

*When used with a BP, BO, BC and BD mating ring.

 Type 57B/58B/58U
ELASTOMER O-RING SEALS
Technical Specification

Hydrostatic Pressure Limits

Materials of Construction

SEAL COMPONENTS MATERIALS

Description Standard Options

Primary Ring/Face Resin-Impregnated Carbon Graphite Sintered Silicon Carbide

Antimony Impregnated Carbon Graphite

Snap Ring 316 Stainless Steel Alloy 400 (Monel®)

Set Screw Alloy C-276 (UNS N10276)
Disc
Retainer
Springs

Anti-X Ring Pure PTFE —

Secondary Seal O-Ring Nitrile Perfluoroelastomer

Fluorocarbon
Ethylene Propylene
Monel is a registered trademark of Inco Alloys International, Inc.