Scribd
Upload
32 views

How To Make Motor Controller Circuit

tttg

Uploaded by

choti3x
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views

How To Make Motor Controller Circuit

tttg

Uploaded by

choti3x
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

instructables

How to Make Motor Controller Circuit

by Utsource123

Hii friend,

Some times we require less RPM (Rotation Per Minute)of motor and some times we require very high RPM of
motor.So today I am going to make a circuit using IRFZ44N MOSFET that will control the RPM of motor.We can
use this circuit upto 15V DC power supply.

This circuit require only Z44N MOSFET and a variable resistance.

Let's get started,

How to Make Motor Controller Circuit: Page 1


Step 1: Take All Materials As Shown Below

Materials required -

(1.) Potentiometer/ Variable resistor - 100K

(2.) DC Motor - 12V

(3.) MOSFET - IRFZ44N

(4.) Step-down Transformer - 12V with rectifier (For 12V DC Power supply)

(5.) Connecting wires

How to Make Motor Controller Circuit: Page 2


Step 2: Connect MOSFET to the Potentiometer

Firstly we have to connect MOSFET to the potentiometer.

Solder Gate pin of MOSFET to middle pin of potentiometer and

Solder Drain pin of MOSFET to 1st pin of potentiometer as you can see in the picture.

How to Make Motor Controller Circuit: Page 3


Step 3: Connect Input Power Supply Wire

Next we have to connect Input power supply wire to the circuit.

NOTE : We have to give input power supply upto 15V DC.

Solder -ve wire of input power supply to 3rd pin of potentiometer and

solder +ve wire of input power supply to the 1st pin of potentiometer/Drain pin of MOSFET as you can see in the
picture.

Step 4: Connect Wires in the Motor

Connect +ve and -ve wire in the motor as you want the rotation of motor.

How to Make Motor Controller Circuit: Page 4


Step 5: Connect Output Power Supply Wire

Next we have to connect output power supply wire/Motor wire.

Solder -ve wire of motor to -ve wire of input power supply and

solder +ve wire of motor to source pin of the MOSFET as you can see in the picture.

Step 6: HOW TO USE IT

Give power supply to the circuit and rotate the knob of potentiometer in clock wise direction.

As we will rotate the knob then motor will start rotating.

This type we can make motor controller circuit using IRFZ44N MOSFET.

If you have any question then comment below now and If you want to make more electronic projects like this then
follow utsource now.

Thank you

How to Make Motor Controller Circuit: Page 5


How to Make Motor Controller Circuit: Page 6

You might also like