Scribd
Upload
164 views

DS TMG022 Vehicle Detector

HIK Vehicle Detector

Uploaded by

Jonathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
164 views

DS TMG022 Vehicle Detector

HIK Vehicle Detector

Uploaded by

Jonathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DS-TMG022 Vehicle Detector

Introduction
DS-TMG022 is a 2-ch loop-based digital vehicle detector. The device is
designed with high reliability, and equipped with high performance
microprocessor and channel sequence scanning technology. With
functions of frequency self-adaption and full environment tracking, the
device can track passing vehicles in a fast, effective and accurate way.
The device integrates standard vehicle counting algorithm, and can be
widely deployed in entrance/exit systems with traffic cameras.

Features and Functions Available Models


 2 inputs of inductive loops
DS-TMG022
 Recognizes vehicles of more than two wheels
 Provides traffic statistics including traffic flow, speed and length
 Detects traffic events including forward/wrong-way driving and speeding
 Built-in EEPROM for saving configuration parameters in power cut
 Accepts traffic lights connection to upload light status
 Fault detection to output operating status of loops and traffic light detector
 Voltage surge protection
Specifications

Model DS-TMG022

Inductance self-tuning range 20 to 1000 μH

Vehicle detection rate ≥ 99%

Sensitivity (-△L/L) 0.02% to 0.96%, 4 levels adjustable

Loop operating frequency 28 KHz to 120 KHz, 4 levels adjustable (highest, high, low, lowest)

Max. response time 32±2ms

Loop fault recovery time ≤ 100ms

Loop fault detection interval ≤ 10ms

Output port 2 relay output, VDRM 70 V, max. current 30 mA

Power supply 220 VAC

Power consumption ≤3W

Operating temperature -30 °C to +70 °C (-31 °F to 167 °F)

Operating humidity < 90%, non-condensing

Dimensions 105 × 88 × 40mm

Typical Application

Relay Signal Application 1

Relay Signal Application 2

You might also like