BILL-OPERATED MASSAGE CHAIR

RT-M02A
USER MANUAL

D
INDEX

eluxe Massage Chair

Maintenance method

D
Chair Controller
Please use dry cloth to clean the controller

eluxe Massage Chair

MAINTENANCE AND CARE

Notice
Do not use corrosive detergent or cleansing powder, such as ethanol, so as to avoid damage, colour changes, dehiscence etc.

Safety precautions--- -------------------------------------------------------1 Product function features--------------------------------------------------4 Name and function for each part----------------------------------------5 Preparation before use-----------------------------------------------------9 Operation steps------------------------------------------------------------10 Assembly method----------------------------------------------------------11 Troubleshooting------------------------------------------------------------12 Maintenance & care------------------------------------------------------13 Specifications---------------------------------------------------------------13

To clean plastic, pipe and armrest, please use cotton fabric immerged in a neutral detergent, wring out it to until dry and use it to clean , after all the above parts are cleaned by the detergent, then use dry cloth to clean the chair.

Notice
Do not use a wet towel to clean the controller so as to avoid malfunction.

Back cushion and pillow

If there is dirt, please use cloth with neutral detergent, then use wet cloth to clean it, finally place it in a ventilated area to dry naturally.

Storage method
Put the chair in a dry place after cleaning. Please cover it when not in use to avoid dirt and dust.

Notice
Do not place the chair under the sunshine directly for long time, and not near a hot object, such as a burner, to avoid color changes or deterioration.

Friendly inspection
Check for: A burning smell Damage to the power cord Be sure to inspect the product once Overheating of the power cord use it for long Other abnormal condition time. To prevent malfunction and accidents, please pull out the Please stop using power plug from the socket. And contact the dealer where you purchased the product or our company. Please do not disassemble it yourself.

SPECIFICATIONS
Name
Model Rated voltage Rated frequency Spread dimensions Bill accepted massage chair RT-M02A 220-240V ~ Rated power Safe design Weight Dimensions Used Indoors

50/60Hz

13

eluxe Massage Chair TROUBLESHOOTING

Phenomenas Reasons
If plug is inserted to the socket? No display after starting If power switch behind the armis cut? If the fuse is burnt? If the back cushion touches on the wall or other obstacles?

D
of warnings and cautions. injured.

eluxe Massage Chair

SAFETY PRECAUTIONS
Before using the product, please read the Safety precautions carefully and use it properly. Please put relevant notice on visible area if necessary. To clearly indicate the degrees of damage, the notice items are divided into the proper applications

Solutions
Plug into the socket. Switch on the power. replace the fuse with same type. To avoid collision, please shut off the power switch ,move the machine, turn on the power switch again.

Both are important and relevant to your safety concern, please comply with them.

WARNINGS Once Wrongly used, there is a possibility of death or to be seriously

Once wrongly used, there is a chance the user can be seriously

Stop working suddenly

If it exerts heavily? (For safety, the massage mechanism will stop working once bear the overburden)

Let the body to leave the back cushion temporarily, shut off the power switch , after turn on the switch again to press the function button. All start again.

CAUTIONS injured or physical damage.

Red light flashes at the inserting place screen show Err1

If the cash box is full? Massage mechanism can not return to original state. If the current is unstable?

Take out the money, and restart the machine Indication for prohibited actions and behaviours. Check the massage chair, try it again after powered on . If it can not be recovered, the massage chair should be sent for repair. Denote mandatory actions and instructions for safe operation. Try it again after shutting off the power for 5 seconds. For safety, do not repair the product by yourself.

screen show Err2

Warnings

If the chair still does not work, cut the power off and remove the plug from power socket, please contact with the distributor or our company for maintenance and care.

Is it a malfunction?
During operation, should the chair make the following sounds or not feel right, it could be the normal phenomena come from the structure. it will not influence the lifetime of the chair. The clack sound when travelling up and down of the kneading mechanism. The gears and motor sounds in operation. The friction of the massage chair and other materials. Noise of inflating and deflating air bags.

12

D
Mandatory
Serious knob Acute disease Heart problem Dottiness people

eluxe Massage Chair

D
Assembly/ folding method
Unfold the backrest in the direction indicated by the arrow, At approximate 115 degrees , a locking sound is heard.

eluxe Massage Chair

ASSEMBLY METHOD WARNINGS!

Release locking lever situated under the backrest and behind the seat, then fold backrest forward According to the arrow direction until it touches the seat cushion.

1.Persons with the following conditions should consult with their doctors before using the product: Pregnancy Menstruation Osteoporosis High fever Abnormal spinal problems

Serious blood circulation problem in the legs Respiration apparatus problem

People receiving medical treatment Uncomfortable feeling on the body

People with heart pacemakers or any other internal medical electrical apparatus 2.Should for any reason, the product does not work or an abnormality occurs please disconnect power immediately and contact the distributor for an overhaul repair. 3.When descending the footrest or backrest, please be sure there are no children, animals or any other obstructions under the footrest or backrest. 4.Use the rated power supply to avoid fire or electrical shock. 5.Should the power socket, plug or cord be damaged or loose, do not use. 6.Keep power cord unobstructed at all times, i.e. not twisted, knotted, over flexed or pulled and do not place anything heavy on it. 7.Do not disassemble, repair or alter the product. Only technicians authorized by our company should repair the product. 8.Should any abnormal phenomenon occur when using it, stop immediately and consult with the doctor. 9.Cut the power off after use.

Locking lever

Backrest disassembly method

Seat cushions disassembly method

Zipper Back cushion Air bag tube Air bag plug Seat cushion

Backrest

Prohibited
1. Use the massage chair in damp places. 2. Put the massage chair close to a furnace or under the sunshine directly. 3. Use product on heated carpet or other heating devices. 4. Put the massage chair on an uneven surface during operation. 5. Use the controller with wet hands. 6. Drop the controller on floor or into water. 7. Pull the controller cord with excessive strength. 8. Put heavy things on the controller.

11

D
Power on Self-inspection

eluxe Massage Chair

CAUTIONS! Mandatory

D
power socket.

eluxe Massage Chair

OPERATION STEPS
Insert the plug into fine grounding three core wire power socket. Switch the power on.(behind the backrest)

1.Remove the plug from power socket when out of use. 2.Should product receive maintenance, switch off and remove plug from power socket. 3.When disconnecting plug from socket, be sure to hold insulating bush instead of power cord. 4.Do not use the product while smoking or near a fire place. 5.Please ensure to install grounding. In case malfunction, leakage may cause an electrical shock. Additionally, consult with the dealer when installing the grounding. 6.Should a blackout or power failure occur, switch power off immediately and remove plug from 7.Before use, uncover back cushion and make sure if the back and the inner cushion is in good order. Should any part be damaged contact distributor immediately and do not use until repaired. 8.When descending the footrest or backrest, use moderate pressure and be sure there are no obstructions or children near or under the footrest or backrest. 9. If the power cord is damaged , it can only be replaced by the manufacturer's maintenance department or similar department.

The bill acceptor massage chair box enters into the self-inspection state after it is powered. If the self-inspection is normal, it will go into standby state. Now the parameters can be set. If the self-inspection is abnormal, there are the following three display Err0 internal communication is abnormal. Err1 massage mechanism reposition is abnormal. Err2 bill acceptor initialization is abnormal. Abnormal phenomena : refer to the troubleshooting.

Bill-insertion
When the massage chair in the standby state, the bills can be inserted. When the quantity of the inserted bills are less than the set starting quantity, the display screen will show the current bill quantity, when the bill quantity is equal to the setting quantity, the machine starts to show the corresponding running time. If no more bills are inserted within 5 seconds; the machine will begin to work the running time is the present time; the display screen will show the remaining time. When the inserted bill quantity is more than the setting quantity, every inserted bills will make the time increase accordingly (the added value: starting time / starting bill quantity). For example: the starting bill quantity is 3, the starting time is 2 (2 minutes i.e. 120 sec.), then it means 3 bills can start it, every bill added will make the time increase: 120 sec./3=40 seconds.

Prohibited
1. Use the product when using other therapy devices. 2. Use the product for medical treatment purpose. 3. Let children to play on the massage chair. 4. Exert heavy force on the product, or prick or thrust sharply by the knife or other sharp articles. 5. Clean the product with petrol, detergent and spray pesticide on it to avoid any damage to the cover. 6. Sit on backrest, armrest or footrest to avoid injury. 7. Move the chair off of any fragile wood or carpet in case of any damage to the floor or caster. 8. Immediately use the product after meal . 9. Move it after the people sit or loading anything on the chair. 10. Have two people or more than two people on the product to avoid any injury or damage.

Shutting off the machine

When the remaining time on the display screen is 0 all the massage function will be shut off, and shows rESt, This shows the massage chairs is in the state of reposition. When the massage mechanism finished its reposition, the massage chair will return to standby state. The display screen shows 0 .

Take out the cash

1.Unlock

2.Unfold cover to take out bill box

11. Put your head or hands under the product when operation. 12.When operating, put knives, keys, or valuables in the pocket. 13. Let the children use the product alone or unconscious people to use it. Do not disassemble, repair or alter the product except for technicians authorized by our company. If you have any problem with the product, contact the distributor immediately.

Total amount quick inspection

Put the magnetic pen on top of the total amount quick inspection point, the screen then displays the accumulative amount, remove the magnetic pen away, the screen will return to normal state after 3 seconds.

RELEASE BUTTON Total amount quick inspection point LCD

10

eluxe Massage Chair

D
Installation place Floor protection
The base of the massage chair may cause

eluxe Massage Chair

FUNCTION AND FEATURES

1.Backrest ascending and descending structure can fit the body curve automatically; the ergonomically design offers the best massage. The armrest has a bill acceptor inside.

PREPARATION BEFORE USE

Appropriate safety distance from surrounding objects. The horizontal distance between peak point and bottom point of the backrest is over 50cm. The horizontal distance between peak point and bottom point of the footrest is over 15cm.

2.Delicate massage features presents humanistic and an overall enjoyable massage. The movable backrest massage mechanism between neck and waist performs kneading, knocking, kneading & knocking and finger-pressing modes; meanwhile adjustable speed and width help to relieve muscular fatigue and increase blood circulation.

damage to the floor, we advise to place firm cushioning (such as cushion) under the chair. Carpet Floor

Surroundings
KNEADING
KNOCKING KNEADING & KNOCKING FINGER PRESSING Do not put massage chair in damp place (such as bath room), to avoid the machine getting wet and causing electrical shock. Do not place the massage chair near a hot place (such as burner), to avoid fire or damage to the cover.

3.Lower back allows wavelet air pressure massages. Air bags at the thigh, buttock and legs areas will be inflated and deflated with air alternatively to offer a repeated air pressure massage and really helps relax nerves and improve blood circulation for lower body. Buttocks and thigh air bags The massage chair belongs to class I electric appliance with a three core power source plug, please confirm the earth wire is installed so as to avoid electric shock coming from an electricity leakage during operation. 4.One air bag in the upper and the lower position of the left and right side respectively and the air bags in the middle of the two sides make the alternant and circulative massage.

Grounding

Moving method
Adjust the backrest to the peak point, place the controller and the plug on the seat cushion, be sure all the wires are not close to the floor, use your hands to press the top of the backrest until it is lowered, make sure the back two plastic foot cushions are far enough from the floor and has enough space, then use the castor to move the chair smoothly.

Leg air bags

D
LCD screen
TIME MONEY SET TOTAL
MODE WIDTH SPEED

eluxe Massage Chair

D
External structure
Pillow Armrest Seat cushion

eluxe Massage Chair

NAME AND FUNCTION FOR EACH PART

NAME AND FUNCTION FOR EACH PART

Display area for the setting data, running time, remaining time After the machine is initialized it shows rESt. After it recovered to the standby state it shows 0. When the inserted bill's value didn't reach the setting it shows ---X (X:0-9). When the inserted bill's value reach the set it shows time XX : XX (X:0-9) When error occurs, it shows the malfunction code (ErrX) (X:0-3) Under standby state, you can check or change the settings. (Refer to remote controller chapter for details)When change the settings, __XX will flash, you can press to change the data. When running, TIME appear. When check or change total time, TOTALand TIME appear. Display area for When check or change total bill quantity, TOTAL check/change settings and MONEY appear. When setting starting bill quantity, SETand MONEY appear. when setting starting time, SET and TIME appear. when setting massage chair descending time, SET and TIME appear. Massage mode display area
Kneading Knocking Finger-pressing Kneading & Knocking

Backrest

Fuse Power socket Back cushion locking lever

Calf

Caster

TIME MONEY SET TOTAL

Internal structure

MODE

Back massage mechanism

WIDTH
Narrow

Width indicate for knocking and finger-pressing massage modes.

Middle Wide

LCD Thigh & Buttocks air bags Bill acceptor

SPEED
Slow

Speed indicate for kneading, knocking and kneading &knocking massage modes.
Middle Fast

Lock Calf air bags

Indicator for the parts of air bags.

Calf ascending & descending indicator

Backrest ascending & descending indicator

D
Bill acceptor Remote controller

eluxe Massage Chair

D
Main Menu
Accumulative time display(S,U) Display starting bill quantity(S,U) Display massage chair recline down time before work, unit : second(S,U)

eluxe Massage Chair

Sub Menu
Keep pressing key for 6 seconds to erase the accumulative time(S) Keep pressing key for 6 seconds to erase the accumulative amount(S) Set the starting bill quantity(S,U)

NAME AND FUNCTION FOR EACH PART

After the bill acceptor initialized, the green light on the bill acceptor will flash, then it can accept bills.

Accumulative total amount display(S,U)

Display starting time, unit : minute(S,U)

Set the starting time(S,U) Set the massage chair recline down time before work(S,U) Setting supervisor password(S)

For password setting Previous menu / increase Next menu / decrease User(U,S) Confirm / enter sub-menu
S: supervisor U:user

Supervisor user(S)

Setting user password(S,U)

Cancel / back to previous menu

Password Validated
Under standby mode, connecting remote controller to the machine to start setting, screen shows _ _ _ _ , please input user's password which consisted by four digital, then press to confirm password (includes supervisor's password and user's password, original

supervisor's password is ABCD, original user's password is AAAA ), After successfully proofread password, the machine will select users automatically; while if the system will fail to proofread the password for three times, the machine will be locked and all buttons will be invalid for selection. But you may shut off power and restart the machine. Once the plug of the remote controller pulled out, the massage chair will be the condition out of setting.

Accumulative time If the accumulative time is less than 100 hours, the display format is : HH : MM(HH is hour, MM is minute). If the accumulative time is more than or equal to 100 hours and less than 10000 hours, the display is 3 to 4 digits integer of hours (minutes are omitted). Accumulative amount: If the amount is less than 10000pcs of bill's value, the display is 1 to 4 digits integer. Starting bill' s quantity: setting range is 1-10; which corresponds to 1-10 bills. Starting time: setting range is 1-15; corresponding time is 1-15 minutes. Massage chair: recline down time before work : setting range is 0-30; corresponding recline down time is 0-30 seconds. Password setting : when screen shows SUP_ (supervisor) or USE_(user), press button to enter password setting, screen shows _ _ _ _ to remind consumer imputing password which consists of 4 numbers, press to save it, screen shows _ _ _ _ again to remind consumer imputing password again, press to confirm. System will be back to standby mode only when passwords are the same for two times inputting. Accumulative time erasure: Under the display of accumulative time state, keep pressing for 3 seconds, the display screen will show CLEA, the time will be erased after 6 seconds. When the action is successful, the screen will show 0. Accumulative amount erasure Under the display of showing the accumulative amount state, keep pressing for 3 seconds, the display screen will show CLEA, the amount will be erased after 6 seconds. When the action is successful, the screen will show 0.