Scribd
Upload
23 views

Remote Controller - Ving-Card

Magnetic stripe and RFID remote controller

Uploaded by

automatismos.ve
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views

Remote Controller - Ving-Card

Magnetic stripe and RFID remote controller

Uploaded by

automatismos.ve
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Product Data

Remote Controller
Magnetic stripe and RFID remote controller

The VingCard Remote Controller is fully


compatible with VingCard electronic locking
systems and provides access control on
common doors, such as vehicle barriers,
health clubs, conference suites, staff entrances,
guest night entrances and more. Our Remote
Controller is therefore an advantageous
supplement where regular locks are not
suitable.

Features:
• Improved aesthetics – modern design.
• Few chassis – yet diversity in reader
technology. No need for a big stock of
different spare parts.
• Backwards compatible with old VingCard
readers.
• Snap-on frame for flush mounting always
comes with the Remote Controllers – Easy to
take off for surface mounted installation.
• All models come with a heating element for
optimal operation in cold environments
(optional to use).
• Standard cover plates are available to cover
up old hole patterns.
• Different models available for all VingCard
software platforms.
Note: Photos may differ from actual finish.
Specifications
Typical remote controller installed:
Technical data:
Each complete unit, supplied individually packed, consists of:
1) Remote controller unit with reader and heating element.
2) Relay box or gateway (depending on software platform.
3) 20 metres of communication cable between remote
controller and relay box/gateway.

Dimensions - surface mounted model:


• Height: 170,5 mm
• Width: 85,5 mm
• Depth: 81 mm
Insertion LCU when surface mounted:
Dimensions - flush mounted model:
Flush mounted model Height Width Depth
Housing dimensions 173 mm 88 mm 42 mm
Cover plate (frame) 195 mm 110 mm 3,5 mm
Front escutcheon 170,5 mm 85,5 mm 41,5 mm

Dimensions - RFID model:


• Height: 170,5 mm
• Width: 85,5 mm
• Depth: 39 mm

Insertion LCU when flush mounted: Electrical spesifications:


Supply voltage 10.5-28.0 VDC
Supply current 300 mA (24V, without heating Sum of Reader
element). + Relay box
650 mA (24V, with heating
element).
350 mA (12V, without heating
element).
1050 mA (12V, with heating
element).
Load current, output 1 Min. 0.1A @ 5VDC1 Resistive load2
Max. 5A @ 30VDC

RFID LCU:
Load current, output 2 Min. 1mA @ 5VDC Resistive load2
Max. 1A @30VDC

Environmental specifications for card reader:


• Minimum: 0 C (without heating element), -30 C (with heating element).
• Maximum: 50 C (without heating element, 50 C (with heating element).
• Humidity: Non condensing.

Other specifications:
• Front cover color in RAL 7000
Art. no: 4819048/April 2009 • Copyright VingCard Elsafe 2009 ©

• The rest of the housing in color RAL 7021

Unlimited possibilities •
customized solutions
Contact us:

VingCard Elsafe AS
P.O. Box 511 • 1522 Moss • Norway
Tel: +47 69 24 50 00 • Fax: +47 69 24 50 50
E-mail: [email protected] • www.vcegroup.com

Specifications may change without notice.

You might also like