Product Specifications

400APNM
400APNM--C
Type N Male for CNT-400 braided cable

OBSOLETE
This product was discontinued on: June 18, 2012
Replaced By
400BPNM-C Type N Male for CNT-400 braided cable

400BPNM-C-G Type N Male for CNT-400 braided cable (Gold Pin)

General Specifications
Interface N Male
Body Style Straight
Brand CNT®

Electrical Specifications
Operating Frequency Band 0 – 6000 MHz
Cable Impedance 50 ohm
Connector Impedance 50 ohm
RF Operating Voltage, maximum (vrms) 707.00 V
dc Test Voltage 2500 V
Outer Contact Resistance, maximum 0.25 mOhm
Inner Contact Resistance, maximum 1.00 mOhm
Insulation Resistance, minimum 5000 MOhm
Peak Power, maximum 10.00 kW
Insertion Loss, typical 0.05 dB

©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 3
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 10, 2016 February 14, 2017
Product Specifications
400APNM
400APNM--C

Outline Drawing

Mechanical Specifications
Outer Contact Plating Trimetal
Inner Contact Plating Gold
Outer Contact Attachment Method Clamp
Inner Contact Attachment Method Captivated
Interface Durability 500 cycles
Interface Durability Method IEC 61169-16:9.5
Connector Retention Tensile Force 330 N | 74 lbf
Connector Retention Torque 0.56 N-m | 0.41 ft lb
Coupling Nut Proof Torque 1.70 N-m | 1.25 ft lb
Coupling Nut Proof Torque Method IEC 61169-16:9.3.6
Coupling Nut Retention Force 450.00 N | 101.16 lbf
Coupling Nut Retention Force Method IEC 61169-16:9.3.11

Dimensions
Nominal Size 0.405 in
Diameter 20.25 mm | 0.80 in
Length 38.22 mm | 1.50 in
Weight 47.08 g | 0.10 lb
Width 20.25 mm | 0.80 in

Environmental Specifications
Operating Temperature -40 °C to +85 °C (-40 °F to +185 °F)
Storage Temperature -65 °C to +125 °C (-85 °F to +257 °F)
Immersion Depth 1m
Immersion Test Mating Mated

©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 2 of 3
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 10, 2016 February 14, 2017
Product Specifications
400APNM
400APNM--C

Immersion Test Method IEC 60529:2001, IP68

Mechanical Shock Test Method IEC 60068-2-27
Climatic Sequence Test Method IEC 60068-1
Damp Heat Steady State Test Method IEC 60068-2-3
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11

Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
Average Power, Inner Conductor Temperature 100 °C | 212 °F

Return Loss/VSWR
Frequency Band VSWR Return Loss (dB)
0–3000 MHz 1.05 33.00
3000–6000 MHz 1.17 22.00

Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
China RoHS SJ/T 11364-2006 Above Maximum Concentration Value (MCV)
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

* Footnotes
Immersion Depth Immersion at specified depth for 24 hours
Insertion Loss, typical 0.05v¯freq (GHz) (not applicable for elliptical waveguide)

©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 3 of 3
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 10, 2016 February 14, 2017