Scribd
Upload
44 views

Measurement

Measurement tape Calibration

Uploaded by

Milon Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
44 views

Measurement

Measurement tape Calibration

Uploaded by

Milon Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Calibration Certificate

Calibration Certificate No.:EISL/Cal-08 Issue Date: 24.10.2021 Page No.: 1 of 1


Date of Calibration: 16.10.2021 Recommended Calibration Due On: 15.10.2022

Calibrated for : Day Apparels Ltd


21, MH Tower,Vogra,Gazipur,Bangladesh.
Description of instrument to be calibrated : Steel Scale
Make: MC
Range: (0-1000) mm L.C : 1 mm
SL No. : 00272058
Calibration Location & Instrument Receipt Date : At Site (16.10.2021)
Identification of Instrument : N/P

Traceability and its reference certificate :


Description Traceability Certificate No. Calibration Date Valid upto Calibration Agency
Scale & Tape
CE-20-07/015/C078/04N/sp 07.09.2020 07.09.2021 C.E.P.L
Calibration Unit
Digital Thermo
QSI/0597/21/05 18/05/2021 17/05/2022 QSI-India
Hygrometer
Traceability: Standards used for calibration are traceable to National Standards through NABL accredited laboratory
Environmental conditions : Temperature: 20°C±2°C Humidity: 50±10%RH
Illumination: 250 to 500 lux, Noise level :< 60dB
Basis of calibration : As per Work Instruction (WI- 01)
Uncertainty of measurement at 95%
Confidence level : ±676.12 (µm)
Calibrated By : M. Abdullah

Calibration Results
Sl. Nominal Value from Mean of Observed Values on
Error (in mm)
No. Zero Mark (mm) Reference (in mm)
1 10 10.000 -0.000
2 20 20.001 -0.001
3 50 50.002 -0.002
4 100 100.003 -0.003
5 200 200.005 -0.005
6 300 300.007 -0.007
7 600 600.015 -0.015
8 1000 1000.021 -0.021
Note: i) DUC: Device under Calibration.
ii) The results in the certificate are valid at the time of measurement under stated conditions.
iii) The certificate if produced for any purpose commercial or otherwise should be reproduced in full. Partial of the certificate or an
abstract thereof has to be got specifically approved from the technical and the quality manager of this job.

This certificate, issued by Eurosia ITC Services Ltd refers only the particular item submitted to calibrate.

…….. End of Certificate ……..

You might also like