Scribd
Upload
17 views17 pages

Giới Thiệu Công Ty Bản Thuyết Trình Kinh Doanh a&B

Giới Thiệu Công Ty Bản Thuyết Trình Kinh Doanh a&B

Uploaded by

TRANG NGUYỄN THỊ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views17 pages

Giới Thiệu Công Ty Bản Thuyết Trình Kinh Doanh a&B

Giới Thiệu Công Ty Bản Thuyết Trình Kinh Doanh a&B

Uploaded by

TRANG NGUYỄN THỊ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

GLOBAL A&B

TABLE OF CONTENTS

Part 1: Introduce

Part 2: Machine capacity and processing ability of the transfer line

Part 3: Product

Part 4: Machine operating procedures


Part 1: Introduce
Part 2: Machine capacity and processing ability of the transfer line

1 . CUTTING LINE MACHINE XB 1530

2 . SLITTINC LINES CT1350

3 . SLITTINC LINES CT 650

4 . PACKGING MACHINE
1 . CUTTING LINE MACHINE XB 1530

Capacity : 6.000 mt per month


Thickness : 0.30-3.20 mm
Width : 14-1350 mm

Coil ID : 508 / 670 mm.


Coil weight : 75mt (Max)
Slit tolerance :± 0.70 mm
Camber rate : ≤10 mm (length 7000m).
: ≤20 mm (length 2500m)
Min slit width : 74mm
2 . SLITTINC LINES CT1350

Capacity : 4.000 mt per month


Thickness : 0.30-3.20 mm
Width : Max 1350 mm
Length : 200-4200 mm

Diagonal tolenrance : L ≥ 1.20 mm


Length tolenrance : +-0.20 mm

Burr : < 3%
Flatness : ≤4 mm for length 1000 mm
3 . SLITTINC LINES CT 650

Capacity : 2.000 mt per month


Thickness : 0.30-3.20 mm
Width : Max 650 mm
Length : 200-3000 mm

Diagonal tolenrance : L ≥ 1.20 mm


Length tolenrance : +-0.20 mm

Burr : < 3%
Flatness : ≤4 mm for length 1000 mm
4. PACKGING MACHINE
Part 3:
Product
PRODUCTION PROCESS OF VARIOUS MACHINERY
I: PRODUCTION PROCESS OF DEFROSTING MACHINE

Step 01. Choose rolled steel billet


Step 02. Feed the rolled steel billet onto the discharge shaft assembly
Step 03. Corrugated iron assembly
Step 04. Tunnel plating lifting assembly 1
Step 05. Workpiece guide assembly
Step 06. Splitting knife assembly
Step 07. Edge roll assembly
Step 08. Tunnel plating lifting assembly 2
Step 09. Corrugated iron pressing assembly
Step 10. Stretch guide assembly
Step 11. Receiving shaft assembly
Step 12. Sheet lifting machine assembly
II: PRODUCTION PROCESS OF SHEET SHIELDING MACHINE

1. Machine assembly for lifting and transferring discharge sheets

2. Corrugated iron discharge machine assembly

3. Straightener assembly

4. Corrugated iron length measuring machine assembly

5. Cutter assembly

6. Conveyor assembly

7. Finished product assembly


Thank
you!!

You might also like