Pumps and Valves

www.hptechnik.com Industrial pumps

Model key for hp-Internal gear pumps to 40 bar 1.0

Motor pump groups

For determining order specifications

– – – –

Discharge l/h at 0 bar - Direction of rotation

Pressure stages Speed of Special design and accessories
Series - Nozzle port (only PON) Medium

Units for single-pipe

bar rotation (add code letters sequentially)
1400 RPM 2800 RPM viewed from shaft

installation
B VB VBR NVBR P 45 P 90
B VB VBR NVBR M 80 M 160
B VB VBR NVBR G 120 G 240 0 = fuel oil EL
B VB VBR NVBR F 160 F 320 0 = 0.5 - 1.5 MGO / MDO

Pressure aggregates
BG VBG VBGR NVBGR PP 150 PP 300 D = right,

Feed pumps and

BG VBG VBGR NVBGR PZ 200 PZ 400 clockwise 9 = 980 RPM H1 = electrical heating,
BG VBG VBGR NVBGR P 300 P 600 installed
BG VBG VBGR NVBGR MZ – MZ 850
BG VBG VBGR NVBGR M 450 M 900 1=1-4 1 = 1400 RPM without thermostat, ∆ t max = 70 K.
BG VBG VBGR NVBGR GZ – GZ 1100 l = left,
BG VBG VBGR NVBGR G 600 G 1200 counter-

Oil burner pressure

clockwise BH1 = bore hole for H1

aggregates
BH VBH VBHR NVBHR P 1000 – –
BH VBH VBHR NVBHR M 1500 – –
BH VBH VBHR NVBHR G 2000 – – 2=2-9 5 = HFO
Sc = quick-closing valve
BHG VBHG VBHGR – P 3000 – –
BHG VBHG VBHGR – PZ 3700 – –
BHG VBHG VBHGR – M 4500 – –
BHG VBHG VBHGR – G 6000 – –

Filters
BHG VBHG VBHGR – F 6700 – – 3 = 6 - 25 H2 = electrical heating
(for UHE)
UHE-A2 – – – PZ 200 PZ 400
UHE-A3 – – – P 300 P 600
UHE-A4 – – – M 450 M 900

Pump controls
UHE-A5 – – – GZ 550 GZ 1100
4 = 15 - 40
PON – – – – – 3 90 R = nozzle port right 2 = 2800 RPM H3 = electrical heating
PON – – – – – 4 160 (for PON)
PON – – – – – 6 240 L = nozzle port left
PON – – – – – 7 320

Accessories and
Spare parts
Example for ordering: hp-Internal gear pump, VB series, with discharge 450 l/h at 1400 RPM, heating oil EL, counterclockwise direction of rotation, pres-
sure range 4, 15 to 40 bar. Model designation: VBGM - I - 4 - 10

max. permitted suction pressure on suction port A of the pump –0.6 bar. Warning, gas separation occurs at just –0.4 bar.
Nozzles

Pump coversion table

Suntec – hp-TECHNIK
and Application
Special units

Suntec hp-TECHNIK Suntec hp-TECHNIK

PON3-D PON3-I
E4/J4 ==> PON4-D E4/J4 ==> PON4-I
E6/J6 ==> PON6-D E6/J6 ==> PON6-I
E7/J7 ==> PON7-D E7/J7 ==> PON7-I

TA 2 A ==> UHE-A2-PZ-D TA 2 C ==> UHE-A2-PZ-I

TA 3 A ==> UHE-A3-P-D TA 3 C ==> UHE-A3-P-I
General

TA 4 A ==> UHE-A4-M-D TA 4 C ==> UHE-A4-M-I

TA 5 A ==> UHE-A5-GZ-D TA 5 C ==> UHE-A5-GZ-I