Scribd
Upload
15 views

Assignment1 Solution UAV Design-Ll

Uploaded by

uslverok526
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
15 views

Assignment1 Solution UAV Design-Ll

Uploaded by

uslverok526
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Assignment1 Solution UAV Design: Part II

(10 MCQ questions, 1 mark each)

1. Unmanned Aircraft design process includes?

a) Mission requirements

b) Weight estimation

c) Fabrication

d) All of these

2. The flight performance of the designed UAV depends upon?

a) Airfoil Selection

b) Power Plant Selection

c) Flight altitude at which the UAV is flying

d) All of these

3. Among the following what is the design phase of the UAV?

a) Detail design phase

b) Preliminary design phase

c) Conceptual design phase

d) All of these

4. Flow is separated mainly because of?

a) Adverse pressure gradient

b) Favorable pressure gradient

c) High velocities of a fluid particles

d) Low velocities of fluid particles

5. Generally for conventional Aircraft the thrust-to-weight ratio is?

a) Less than one

b) Equal to one

c) Greater than one

d) Can not say

6. Static pressure acts?

a) Normal to flow direction

b) Parallel to flow direction


c) At 180 degrees to flow direction

d) None of these

7. The cross-section of the wing is called?

a) Airfoil

b) Camber

c) Wingspan

d) Wing Chord

8. In flight, what can be the value of Thrust to Weight ratio of UAV (VTOL+Conventional fixed-wing
aircraft)?

a) <1

b) =1

c) >1

d) All the above

9. What is the Aerodynamic efficiency of UAV?

a) It is the ratio of Lift to Drag

b) It is the ratio of Thrust to Weight

c) It is the ratio of Thrust to Drag

d) It is the ratio of Lift to Weight

10. What is the expression of the load factor of a UAV? (T= Thrust, D=Drag, L=Lift, W=weight of
UAV)

a) T/W

b) D/T

c) L/W

d) L/D

You might also like