Scribd
Upload
10 views

Assignment3 Solution UAV Design-Ll

Uploaded by

uslverok526
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
10 views

Assignment3 Solution UAV Design-Ll

Uploaded by

uslverok526
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Assignment3 solution UAV Design: Part II

(10 MCQ questions, 1 mark each)


1. Which one is correct about aerodynamic centre of UAV?
a) Aerodynamic centre does not depend upon the location of centre of gravity
b) Aerodynamic centre depends upon the location of centre of gravity
c) Aerodynamic centre depend upon the location of centre of pressure
d) None of these
2. The sufficient condition of Stable UAV is?
a) 𝐶 ≥0
b) 𝐶 ≤0
c) 𝐶 =0
d) 𝐶 <0
3. Which condition holds to trim the Stable UAV at positive angle of attack?
a) 𝐶 ≥ 0, 𝐶 =0
b) 𝐶 ≤ 0, 𝐶 >0
c) 𝐶 < 0, 𝐶 >0
d) 𝐶 < 0, 𝐶 =0
4. In flight, to make longitudinally stable flat plate, the centre of gravity of flat plate should be?
a) Behind of aerodynamic centre
b) Ahead of aerodynamic centre
c) Exactly at aerodynamic centre
d) None of these
5. Data for question 5 to 6
A wing body alone configuration UAV with a mass of 15kg and wing area of 1𝑚 is flying in
cruise at a speed of 20 m/s at sea level. The zero-lift pitching moment co-efficient of the air
vehicle is 𝐶 =𝐶 = −0.035 and the location of air vehicle aerodynamic centre from

the wing leading edge is 𝑋 = 0.25𝑐 where c the mean aerodynamic chord of wing.

The UAV trim lift co-efficient, 𝐶 will be?


a) 0.56
b) 0.58
c) 0.60
d) 0.45
𝑊 15
2∗ 2∗
𝐿 = 𝑊, 𝐶 = 𝑠 = 1 = 0.60
𝜌∗𝑉 1.225 ∗ 20
6. From the wing leading edge what will be the location of centre of gravity of UAV 𝑋 /𝑐 is?
a) 0.19
b) 0.00
c) 0.25
d) 0.31
𝑋 𝑋
𝐶 =𝐶 +𝐶 − =0
𝑐 𝑐
𝑋
= −0.035 + 0.6 − 0.25
𝑐
𝑋
= 0.31
𝑐
7. Find CL)Dmin, if drag polar of an UAV is given by
CD = 0.035 + 0.16CL2
.
For Dmin condition CL = = .
= 0.47

8. Find CD)Dmin, if drag polar of an UAV is given by


CD = 0.035 + 0.16CL2
For Dmin condition CD = 2CD0 = 0.07
9. As Aspect ratio of wing increases the lift curve slope will?
a) Increase
b) Decrease
c) Remains constant
d) Both option increase & decrease are possible
10. If the weight of the UAV is 50 kg and lift to drag ratio is 10, The UAV flying at a speed of 25
m/s. What is the power required in kilowatt at cruise condition?
a) 1.25
b) 1.34
c) 1.76
d) 1.23
𝑃 =𝑇 ∗𝑉 = 49.05 ∗ 25 = 1226.25 = 1.25 𝐾𝑊

You might also like