YOGAFIX

T25 & T26

YOGAFIX
HIGH STRENGTH,
HIGH FLEXIBLE ADHESIVE FOR
EXTERNAL & INTERNAL TILES &
STONES AT ANY HEIGHT

Grey White

For Internal For

& External Vibration
Floor & Wall Area

Superior
Extended
Bond
Open Time
Strength

Highly
Low VOC
Flexible

Available in 20 kg pack.
 YOGAFIX

DESCRIPTION STANDARD COMPLIANCE/ SPECIFICATION

Roff Yogafix Grey & White is a high polymer modified & Roff Yogafix Grey & White complies to Type 4 ‘T S2’ as per
highly flexible adhesive with enhanced properties of slip “IS 15477: 2019 - Adhesives for use with ceramic, mosaic
resistant, extended open time & excellent bond strength and stone tiles - Specification.”
which is necessary for fixing large format tiles/ natural
Also, Roff Yogafix Grey & White conforms to class C2TES2 as
stones & slim tiles on vertical & horizontal surface for
per EN 12004 : 2017/ ISO 13007 - a cementitious (C) improved
indoor as well as outdoor application especially in external
performance (2) slip resistant (T) highly deformable (S2) with
conditions, high footfall areas & on substrates subject to
extended open time (E) tile adhesive.
high deformations/ vibrations.

AREA OF USE

Material to be fixed On surface/ substrate Area of application

All types of ceramic tile, Cement-based screeds/ bed, Floor and walls, internal &
terracotta, pavers, brick, gypsum & cement based asters/ external area, saunas, spa,
vitrified tiles, glass mosaic renders, concrete surfaces & fountains & swimming pools
tiles, large format tiles, precast bricks, existing tiles & stones, etc., terraces & balconies,
terrazzo, marble & natural other cement-based surface, podium decks & facades,
stones, large thin/ slim tiles, waterproofing products, window/ door frame, vibrational
low thickness slabs. drywall like cement /bison/ area, domestic applications,
gypsum/ fibre boards etc*., commercial applications,
Thermal insulation panel. high football areas etc.

*Consult cement board / plaster board / cement slabs / Concrete precast sections & Gypsum dry wall manufacture for product compatibility & Load carrying
capacity before application. Reach out to Pidilite Roff team for extended support for exterior tile/stone fixing and drywall installation

FEATURES AND ADVANTAGES LIMITATIONS

• Highly Polymer modified – excellent bond strength at • Do not apply directly to other drywall partitions of
different conditions. plywood & wood derivatives, decorative laminates,
metal, plastic, highly deformable surfaces subject to
• Extended open time - suitable for large format &
vibrations. Use Masterfix as per application.
external condition.
• Adhesives for ceramic tile, bricks and stone are not
• Sag Resistant formula - for hassle-free application
designed as replacements for waterproof coating.
on vertical walls.
Use Roff waterproofing coating before tiling for
• Water & shock resistant - suitable for wet areas & wet area.
commercial floor too.
• Do not use for fixing artificial/ nano/ engineered
• Sustains heat ageing – Idea for external & high stone/ composites/ metal tile. Use Masterfix for
temperature applications. the same/ consult with technical team.
• Highly deformable adhesive - sustains substrate vibration.

• Low VOC - for healthy living.

 YOGAFIX

TECHNICAL INFORMATION
APPLICATION PROPERTIES

Testing Properties Test Results

Mixing Ratio Grey - 0.260 : 0.280 by weight

(Powder : Water) White - 0.300 : 0.320 by weight

Mixed Density 1.45 - 1.55 kg/ litre

Open time Min. 35 minutes

Adjustability Approx. 40 minutes

Pot life Min. 120 minutes

VOC content < 0.2 gm/ litre

Application Temperature (substrates and materials) 5°C to 35°C

Adhesive thickness 3 -12 mm

Setting/ Trafficable/ Grouting time 24 hours

PERFORMANCE PROPERTIES AS PER ISO 13007 AND EN 12004 (C2TES2)

Testing Properties Requirement Test Results

a) Tensile Adhesion Strength, after 28 days ≥ 1.0 N/mm² ≥ 1.55 N/mm²

b) Tensile adhesion strength after water immersion ≥ 1.0 N/mm² ≥ 1.11 N/mm²

c) Tensile adhesion strength after heat ageing ≥ 1.0 N/mm² ≥ 1.59 N/mm²

d) Tensile adhesion strength after freeze-thaw cycle ≥ 1.0 N/mm² ≥ 1.16 N/mm²

e) Slip resistance (T) ≤ 0.5 mm ≤ 0.3 mm

f) Extended open time at 30 minutes (E) ≥ 0.5 N/mm² ≥ 0.5 N/mm²

g) Transverse deformation (S2) ≥ 5 mm ≥ 6.5 mm

PERFORMANCE PROPERTIES AS PER IS 15477: 2019 (TYPE 4 ‘T S2’)

Testing Properties Requirement Test Results

a) Tensile Adhesion at Dry Condition, after 28 days ≥ 1.5 N/mm² ≥ 1.59 N/mm²

b) Tensile Adhesion at Wet condition ≥ 1 N/mm² ≥ 1.16 N/mm²

c) Shear Adhesion at Dry Condition ≥ 1.5 N/mm² ≥ 1.67 N/mm²

d) Shear Adhesion at Wet condition ≥ 1 N/mm² ≥ 1.28 N/mm²

e) Shear Adhesion at Heat Ageing ≥ 1 N/mm² ≥ 1.65 N/mm²

f) Deformability (S2) ≥ 5 mm ≥ 6.5 mm

Note : Test results are indicative as per testing method specified in standard. Test results may vary as per substrate, site condition & testing machine etc.
Actual field performance will depend on installation methods and site conditions.
 YOGAFIX

APPLICATION INSTRUCTIONS APPLICATION

1 2 3

6l R
5- ATE
s
tr
W
Surface saturation
with water
Clean the surface. (SSD condition). Add water first.

4 FI
X 5 6
GA EY
YO GR kg
20

Add powder to Check material

water. Mix it with mixer. consistency.

SUBSTRATE PREPARATION 7 8 9

• The substrate must be level, cured, undamaged, compact,

rigid, resistant, dry and free from any debonding agents 5 mins.

and from damp rising.

Wait 5 mins. and Spread adhesive
• All surfaces must be plumb and true to within 6 mm in remix before use. with notch trowel. Back Buttering

10 ft (3m).
10 11 12
• Dry, dusty surfaces should be dampened with water &
excess water should be swept off.

• New concrete slabs shall be damp cured and 28 days old Move tile opposite
Place tiles within to notches & tap Fill joints with
before application which will reduce the shrinkage from open time. gently. Roff Starlike.
tile fixing surface.
• A
 pply adhesive to the substrate with the flat side of the
• Expansion joints to be provided & filled with suitable trowel.
sealant.
• Comb on additional adhesive with the notched side.
• Do not cover expansion joints with thin set tile
• Use the proper sized notched trowel to ensure full bedding
adhesive/ tile. of the tile.

MIXING • Tiles must be fixed within 30 minutes of adhesive being

applied, depending on the porosity of the surface and
• Add 2.5 – 3 parts of powder to 1 part of water or 5.5 - atmospheric conditions.
6.5 litre water for 20 Kg powder in a clean mixing vessel.
• Check the adhesive ribs periodically and if a skin has formed,
• Adjust the water as per desired consistency. remove the dried adhesive and apply fresh adhesive.

• Mix with a suitable mechanical stirrer or slow speed drills • Press the tiles firmly into position with a slight twisting
(50 - 100 rpm) until a lump free homogeneous paste is action, checking periodically that good contact is
obtained. maintained with the back of each tile and beat in using
rubber mallet to imbed tile and adjust level.
• Always mix required quantity, which can be consumed
• Leave no voids behind tiles.
within pot life.
• For large size tiles or irregular surfaces, adhesive can
• Leave mixture for 5 minutes before use. additionally be buttered on the backs of the tiles to ensure
• No further water should be added. full adhesive contact.

• Use suitable support along with adhesive for fixing tiles on

vertical surfaces.
 YOGAFIX

• For highly absorbent natural stones which may form a COVERAGE

wet patch when adhesive is used, it is recommended to
• Approx. 5 - 6 m²/ 20 kg Bag at 3 mm thickness
use suitable Roff Impregnating sealer on all sides. Please
refer Technical Data Sheets of product intended for use (using 6 mm x 6 mm notch).
for specific instructions of use • Approx. 2.5 - 3 m²/ 20 kg Bag at 6 mm thickness
• For highly absorbent surfaces like drywalls, consult with (using 12 mm x 12 mm notch).
Roff technical team.
• Approx. 1.2 kg/ m² per mm of thickness
• Leave adequate joints between individual wall and floor
*Coverage will vary depending on trowel notch size, type, size of tile
tiles using Roff spacers. The joint width shall be as per the
and substrate smoothness and evenness.
recommendation of architect / engineer.

• Clean off surplus adhesive from the tile face and between PACKAGING
joints.
20 kg
• Clean tools and tile work with water while adhesive is
fresh.
SHELF LIFE

PRECAUTIONS & NOTE 12 months for sealed pack when stored under cover, out
of direct sunlight, dampproof condition and protect from
• Always add powder to water.
extremes of temperature.
• Do not add excess water than recommended.
GROUTING
• Never add sand & cement at site.
Grouting should be carried out after 24 hours of tiling.
• Do not use on wet screed. Surface must be fully cured.
Use the appropriate grouting material from Roff range of
• Do not use the adhesive to correct surface irregularities cementitious and epoxy grouts.
greater than 15 mm.

• Protect from direct rainfall/ foot traffic for at least SAFETY PRECAUTIONS
24 hours. Keep out of reach of children. Wear suitable protective
• Designer/ applicator must evaluate the use of an clothing, gloves and eyes/face protection. After contact
additional mechanical fastening system for extra with skin, wash immediately with plenty of clean water.
security for more than 3m height (such as steel hooks In case of contact with eyes rinse immediately with
fastened to the substrate). plenty of clean water and seek medical advice. Limited to
professional use only.
• For large format tiles or stone, Spacers are recommended.
For more details please refer the relevant Material Safety
• Control joints should be provided at every 3m specially to
Data Sheet, available on request.
accommodate contraction/expansion and filled with
a flexible sealant.
RF-TDS-YGFX-JUN24

Pidilite Industries Limited

Construction Chemicals Division, Ramkrishna Mandir Road, Post Box No. 17411, Andheri (E) Mumbai 400059 INDIA
Tel +91-22-2835 7000 Fax +91-22-2835 7008 • Website : www.roff.in • E-mail : [email protected] • Toll Free No. 1800 22 5502
DISCLAIMER : While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of
their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest
one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company office in your location.