ANNEX F: TECHNICAL DATA SHEET

A) 69KV SUBSTATION EQUIPMENT

1.) 6 pcs Surge Arrester, Type PVN, 60kV, 48kV MCOV, outdoor type
Make
Type
Equipped with Surge Counter
Maximum value of network voltage
Rated Voltage of arrester
Max. continuous operating voltage

2.) 1 Set 69kV THREE POLE DISCONNECT SWITCH, CENTER BREAK TYPE,
WITHOUT
Make EARTHING, GANG/GROUP OPERATED, SINGLE THROW
Catalog #
Rated / Maximum Voltage
Rated Frequency
Rated nornal current
Impulse withstand voltage:
To earth and between poles;
Wet power frequency
Impulse
Across Isolating distance:
Wet power frequency
Impulse
Short time withstand current
Peak withstand current
Leaflet no.
Insulators
Creepage distance
Operating Mechanism
Hand operated by type AGL-14 manual command provided with 8NO + 8NC aux
Electromagnetic interlocking device

3.) 3 pcs 69KV POTENTIAL TRANSFORMER

Make
Type
Standard
Highest System Voltage
Power Frequency Withstand Voltage,
Pri-Ground (1min)
Power Frequency Withstand Voltage,
Sec-Ground (1min)
Induced Voltage
Lightning impulse withstand voltage (1.2/50us)
Withstand voltage for operation at altitude up to
 Frequency
Oil type insulation
Insulator made of porcelain color
Creepage Distance (+/-3.5%)
Primary Terminal made of
Accessories
Secondary Terminal Box
Rating Plate
Earthing connector
Site Conditions
Ambient temperatures (min/daily average/max)
Wind Velocity
Seismic conditions
Primary
Voltage factors

Thermal Burden
U. Prim / U.Sec
Ratio
VA
Accuracy

4.) 3 pcs 69KV CURRENT TRANSFORMER

Make
Type
Standard
Highest System Voltage
Power Frequency Withstand Voltage,
Pri-Ground (1min)
Power Frequency Withstand Voltage,
Sec-Ground (1min)
Lightning impulse withstand voltage (1.2/50us)
Withstand voltage for operation at altitude up to
Frequency
Oil type insulation
Creepage Distance (+/-3.5%)
Primary Terminal made of
Diameter of terminal
Length of terminal
Accessories
Secondary Terminal Box
Rating Plate
Earthing connector
Site Conditions
Ambient temperatures (min/daily average/max)
Wind Velocity
Seismic conditions
Primary (Wound type)
Maximum primary current
Short time thermal current
Short time dynamic current
I. Prim / I.Sec
 Classes
Core 1
Core 2

5.) 1 Set 69kV SF6 CIRCUIT BREAKER

Manufacturer
Type
Ambient Temperature Range
Auto re-closing, suitable for number of phases
Insulation Capacity
Max. erection altitude
Rated Voltage
Service Voltage
Rated Power Frequency Withstand Voltage
- To earth
- Across the open breaker
- Between phases
Rated Lightning Impulse Withstand Voltage
- To earth
- Across the open breaker
- Between phases
Breaking Capacity
Arcing Time (max)
Rated Normal Current
Rated Short Circuit breaking current
Rated Duration of Short Circuit
Rated Frequency
Rated Operating Sequence
Rated Short Circuit Making Current
First-pole-to-clear-factor
Rated Out of phase breaking current
Out of Phase Factor PH
Breaking of Capacitive Currents
- Unloaded overhead lines-breaking current
At a voltage factor of
- Unloaded cable-breaking current
At a voltage factor of
Operating Time
Make time (min)
Closing Time
Break Time (max)
Opening Time
Dead Time
Simultaneous difference bet. Poles (on/off)
Design Data
No. of Operating Mechanisms
No. of Poles
No. of Base Frames
Interrupter Units per Pole
Center Distance of Steel Support Structure
Minimum Clearance in air:
- To earth
- Across the open breaker
 - Phase-to-Phase
Phase to Phase Spacing
Creepage Distance:
- To earth
- Across open breaker
Arc Quenching Medium
Rated pressure SF6 at 20 °C
Signal Loss of SF6 at 20 °C
General Lockout at 20 °C
Quantity of SF6 / breaker
SF6-loss-rate / year

Control Unit Data

Control Voltage
Voltage of Motor
Voltage of Heating
Voltage Tolerance
Free auxiliary contacts, wired (NO/NC/W)

Design Of Monitoring
No. of Channels
No. of Tripping Coils
No. of Cores of Tripping Coils
No. of Closing Coils

6.) 1 assy 69kV TRANSFORMER AND CONTROL PROTECTION AND METERIN

Indoor Metering Cabinet Panel, (To be provided by Customer) retrofitted with all interio
terminal
1 blocks for external
Transformer connection,
Differential Relay provision for podlocking and 240V lamp and swit
Transformer Differential Relay
Phase Overcurrent & Ground Protection
Over and Under Voltage Protection
Over and Under Frequency Protection
Reverse Power Protection
Thermal Element
Alarm Annunciator, 36 points
Circuit breaker & Disconnector discrepancy
switch w/ lamp
1 Statistical Energy meter (kWHR,kVAR, etc.)
Frequency
Active power
Reactive power L
Reactive power C
Apparent power
Power factor
Cos φ
Power demand
kW h
kvarhL
kvarhc
Neutral current
 Voltage THD
Current THD
Individual harmonic
Per Phase current
Per Phase voltage
Auxiliary Relays
Transformer Guard for alarm/trip
Test switch for protection relays
Auxiliary Relays
Transformer Guard for alarm/trip
Trip circuit supervision relays
Trip and Lock out relay
Local/Remote Switch
Push button for lamp test
Audible alarm

7.) 1 Set Battery Bank & Charger

1 Set Battery Bank
Make
Type
Nominal Voltage
Capacity
Internal Resistance
Maximum Charge Current
Design Life
Weight
Dimension

1 Set Battery Charger

Make
Type
AC Input Rating
Phase
Nominal Voltage
Voltage Range
Frequency
DC Output Rating
Nominal Voltage
Equalize Voltage
Float Voltage
Voltage Regulation
Current Variation Range
Operation
ACCESSORIES
Metering
Output DC Ammeter
Output DC Voltmeter
LED Indicators
LED 1
LED 2
 LED 3
LED 4
Operating Temperature
Cooling
Cabinetry

8.) 1 Lot CIVIL WORKS

Scope of works:
Site Grading
Soil testing
Cable Trench (13.8kV Cable)
S/S Fence and Perimeter Lights
Gravel Bedding
Receiving Gantry Foundation
69kV Disconnect Switch Foundation
69KV SF6 PCB and CT/PT
Auxillary Transformer Pad

9.) 1 Lot Grounding System

The substation grounding system is designed to cover a maximum area of 10 x 18 meters
substation and to obtain
1. Transformer the&2.5
tanks ohms (wet area) and 5.0 ohms (dry area) based on specifi
neutrals
2. Equipment housing
3. Steel works
4. Manual Switch operating mechanisms & mats
5. Lightning Arresters
6. Switchgear enclosure
7. Overhead Shield wire
8. Lightning Masts
9. Substation Fence

10.) 1 Lot INSTALLATION / ERECTION WORKS

11.) 1 Lot GENERAL REQUIREMENTS

Scope of works:
including Mobilization and Demobilization,
Permits and Licenses, Errection Insurance
Engineering Design
Testing & Commissioning
Equipment Rental and Delivery of Equipment

12.) 1 Lot EQUIPMENT STEEL STRUCTURE:

Scope of works:
The work specified in this section shall include furnishing of materials, equipment, labor,
Code & Standards:
accessories necessary to perform the completion of structural steel works.
The component parts of the structure are to comply with the latest American Institute of
(AISC) standards, American Society for Testing and Materials (ASTM), American Welding
 Steel:
Comply with ASTM A36
Bolts, Nuts & Washers:
* Structural Steel
1. Anchor Bolts: ASTM A307, Grade A
2. Nuts: ASTM A563, Grade A, Heavy Hex Style
3. Washers: ANSI B18.221 Type B
* High Strength structural steel
1. Bolts: ASTM A325, Type 1 or 2
2. Nuts: ASTM A563
3. Washer: ASTM F436, plain carbon steel
* Expansion Bolts
1. Bolts shall be of the best commercial grade, of the type, class & style, best suite
purpose.
To include :
1 69kV Outgoing Steel Structure to include mounting bracket for 69kV Disconnect
2 PCB Steel Structure
3 CT Steel Structure
4 PT Steel Structure

1 Lot Substation connectors and Accessories

XLPE Cable
High Voltage Connectors
Terminating Kits
Aluminum ACSR Conductor and pole line accessories
CAL DATA SHEET

V MCOV, outdoor type

Ohio Brass, USA
PVN, 48kV, MCOV, outdoor type
Hubbell Zwar Surge Counter
72.5 kV
60 kV
47 kV

WITCH, CENTER BREAK TYPE, 3 POLES,

P OPERATED, SINGLE THROW
MESA -Schneider (Spain) WITH THE
SGCP-72/1250
69 / 72.5 kV
60 Hz
1250 A

140kV
325kV

160kV
375kV
31.5kA rms for 3 seconds
80kA
120, flat terminals
6 nos. type C4-325
1800 mm

command provided with 8NO + 8NC auxiliary contacts

ARTECHE
URU - 72
IEEE-57-13/93
72.5 kV eff
19 kV eff

2.5 kV eff

140 kV eff
350 kV er
1000 meters
60 hz.
yes
Brown
2022
Copper Alloy

-5 / +30 / +40 deg C

150 kph
0.3g Horizontal

1.2 cont.
1.5 30sec
1500 VA
69000:V3/115V ; 115V3
350:1
75
0.3WXY

SCHNEIDER
SDF - 72
IEEE-57-13
72.5 kV eff
140 kV eff

2.5 kV eff

350 kV er
1000 meters
60 hz.
yes
2250 mm
Copper Alloy
30 mm
122.5 mm

-5 / +30 / +40 deg C

150 kph
0.3g Horizontal

2 x 600 amps.
20 kA eff 1s.
50 kA Cr
100 / 200 : / 5A/5A
0.3 B0.1-B0.9
0.3 B0.1-B0.9

SIEMENS, Germany
3AP1FG, SF6, Live Tank
-25 / +50 °C
3

1000 m
72.5 kV
72.5 kV

140kV
140 kV
140kV

325 kV
325 kV
325 kV

14.5 ms
2500A
25 kA
1 sec
50 Hz
O-0.3s-CO-3min-CO
78.8 kA
1.5 p.u.
7.9 kA
2.5 p.u.

10 A
1.4 p.u
125 A
1.4 p.u.

48ms
52 + 5 ms
50 ms
31 + 3 ms
(min) 300 ms
(max) 3 / (max) 2 ms

1
3
1
1
1515mm

700 mm
700 mm
 720 mm
1050 mm

31 mm/kV
31 mm/kV

6 bar rel.
5.2 bar rel.
5 bar rel.
4 kg
0.5 %

125Vdc
125Vdc
230 Vac
+10/-15 (VDE/IEC) %
9/9/1

1
2
2
1

L PROTECTION AND METERING PANEL

by Customer) retrofitted with all interior wiring connectors and
n for podlocking and Transformer
GE, T60, 240V lamp andProtection
switch for cabinet
Relay lighting.

Circutor or GE
Hz
Kw
kvarL
kvarL / (-C)
kVA
PF

Pd
energy
energy
energy
In
% THD-V
% THD-V

Leadline, Made in Switzerland

Type : EVR-12100
12V
70 ah/10 hrs
5 mOhms
18 A
10+ years in Float condition 20oC
21 kg
259L x 168W x 208H

Niksa, Switzerland, Assembled in Singapore

Model : NSC‐125‐20

Single Phase
220Vac
180-250Vac
60 Hz

120Vdc
138Vdc
132Vdc
+=1% from no load to full load
0 - 20Amps Maximum/Automatic Current Limiting
AC Power ON
Auto-Manual Float / Equalize Charging

0 - 20A
0 - 180V

Float Charge
Equalize Charge
 Batt Low
Charger Fail
0 - 50oC
Natural Air
Floor Mount, Mild Steel and Epoxy Primer Coated
Industrial Powder Finish

cover a maximum area of 10 x 18 meters of the proposed

and 5.0 ohms (dry area) based on specific soil resistivity value of

urnishing of materials, equipment, labor, plant, tools and all

of structural steel works.
ply with the latest American Institute of Steel Construction
nd Materials (ASTM), American Welding Society, Inc. (AWS)
ade, of the type, class & style, best suited for the

e mounting bracket for 69kV Disconnector and LA

Not Included in offer

Included in our offer
Not Included in offer
Included in our offer
ELECTRICAL SCHEDULE FOR MEGC 20MVA SUBSTATION
Accumulated
Ref. Activities Plan Month # 1 Month # 2 Month # 3
REMARKS

###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
start finish

1
2
3
4
5
6
7
8
9
Progress( %)

1 Mobilization/Drawings And Design

1.1 Submission of Drawings Day 2 Day 4

1.2 Approval from MEGC Day 5 Day 9

1.3 Mobilization Day 4

2 69kv Substation

Site Development

2.1 Clearing and Grubbing Day 7 Day 11

2.2 Cut and Fill Day 9 Day 13

2.3 Backfill with Compaction Day 74 Day 79

2.4 Gravel Surfacing Day 81 Day 85

2.5 Site Drainage Day 54 Day 61

Seclusion Fence
2.6 Excavation Day 11 Day 19

2.70 Gravel Bedding Day 19 Day 21

2.80 Rebar works Day 18 Day 21

2.90 Form works Day 21 Day 26

2.10 Concrete Works Day 25 Day 35

2.11 CHB Wall Day 33 Day 44

2.12 Backfill with Compaction Day 47 Day 52

2.13 HDG Cyclone wire/Gates Day 54 Day 64

2.14 Cable Trench construction Day 29 Day 41

2.15 Equipment Foundation Day 6 Day 45

2.16 Steel structures Fabrctn/Shipment Day 6 Day 51

2.17 Steel structures Assembly

(Gantry,CT,PT,DS,PCB) Day 52 Day 59

3 Electrical Equipment Works

3.1 Procurementof Electrical Equipments/Ma Day 4 Day 8

3.2 Delivery of Electrical Equipments Day 15 Day 42

Installation/Assembly of Electrical Equipments

3.3 CT,PT,DS,PCB,LA, etc Day 56 Day 66

3.4 MVSG Retrofitting Day 62 Day 64

3.5 2MVA Aux Transformer/Oil Immersed Day 81 Day 83

Installation,mounting,assy, of Electrical
Equipment, Materials and Line Hardwares
3.7 Installation of ACSR wire & line hardwar Day 62 Day 70
from 138KV incoming line, to LA,to PT,to CT,
toDS,to PCB to 10MVA Transformer
3.8 Installation/Cable Pulling of Power,Contr Day 62 Day 79
Instrument Cables Monitoring system
wiring for interfacing/connectionto power mete,
breaker,DS and Tx status & Parameters
3.9 Battery Bank,Charger,AC/DC Panel/Supp Day 72 Day 75
3.10 Outdoor Lighting System including Foun Day 75 Day 81 HAND -OVER
3.11 Grounding System Day 15 8/15/12
 HAND -OVER

3.12 Testing/Commissioning Day 81 Day 86

3.13 Hand Over Day 90