2/3-Port Mechanical Valve

with One-touch Fitting RoHS

Built-in One-touch fitting reduced installation space

and less piping work
Space saving Less man-hours
Built-in One-touch fitting replacing the actuator
Approx. 35% reduction Mounting using a clip makes
(25.8 mm shorter) replacement easier.
48.8 mm 74.6 mm
(VM131F-06-00) (VM131-01-00A + KQ2H06-01S)

Actuator part
VM100F
Actual size Current model Clip

12.9 mm 12.9 mm
shorter 48.8 mm shorter

74.6 mm

Lightweight
With resin body material

80% reduction (48 g lighter)

12 g (VM131F-06-00
Resin body:
) 60 g (VM131-01-00A
Metal body:
)
Variations
Applicable tubing O.D.
Metric size Inch size
Side ported

ø3.2 ø1/8"
ø4 ø5/32"
ø6 ø1/4"

Bottom ported

ø3.2 ø1/8"
ø4 ø5/32"

Mechanical operation: 5 types

VM100F Series
Actuator
type Manual operation: 7 types
CAT.ES12-9A
2/3-Port Mechanical Valve with One-touch Fitting VM100F Series
Mounting With miniature indicator∗1
Bracket mounting Side mounting Panel mounting Possible to check if air pressure is applied
∗1 Bottom ported only
Air pressure
Pneumatic
indicator is applied.

Piping direction 3(R)

(3-port) 3(R)
3(R)
(3-port)
(3-port only) 3(R)
Side ported Bottom ported (3-port only)
White Gray
1(P) 2(A)

2(A)
2(A)
1(P)
2(A)
1(P) 3-port 1(P)
2-port
1(P) 2(A)

Mounting interchangeable with the conventional model Available in vacuum applications

Mounting pitch and height are the same as the current model −100 kPa to 0.7 MPa

Actuator Variations ∗2 It is possible to change the actuator assembly and mount to basic model.

Mechanical Operation
Roller lever ∗2 One way roller lever ∗2 ∗1 If operated (by cam or dog) in the opposite
∗1 direction, the valve will not be opened.

Straight plunger ∗2 Roller plunger ∗2 Cross roller plunger ∗2

Manual Operation
Toggle lever ∗2 Push button (Mushroom) ∗2 Push button (Extended) ∗2 Push button (Flush) ∗2

ON OFF

Color: Red, Black, Green, Yellow Color: Red, Black, Green, Yellow Color: Red, Black, Green, Yellow

Twist selector (2-position) ∗2 Key selector (2-position) ∗2 Twist selector (3-position) 4 colors available for
buttons

ON ON ON
Red Black

OFF

OFF OFF ON Green Yellow

Color: Red, Black, Green, Yellow Color: Red, Black, Green, Yellow

1
 2/3-Port Mechanical Valve
with One-touch Fitting

VM100F Series RoHS

Specifications Flow Rate and Sonic Conductance

Piping Side ported Bottom ported Piping Side ported Bottom ported
Fluid Air/Inert gas Metric
ø3.2 ø4 ø6 ø3.2 ø4
Operating pressure range −100 kPa to 0.7 MPa Tubing size
Ambient and fluid O.D. Inch
−5 to 60°C (No freezing) ø1/8" ø5/32" ø1/4" ø1/8" ø5/32"
temperatures size
Applicable tubing material Nylon, Soft nylon, Polyurethane*3, FEP, PFA Flow rate 1(P) ⇒ 2(A) ⇒ 1(P) ⇒ 2(A) ⇒ 1(P) ⇒ 2(A) ⇒ 1(P) ⇒ 2(A) ⇒ 1(P) ⇒ 2(A) ⇒
Lubrication*1 Not required characteristics 2(A) 3(R) 2(A) 3(R) 2(A) 3(R) 2(A) 3(R) 2(A) 3(R)
Weight (Basic model) 12 g 15 g C values: Sonic
Bracket part number*2 VM1-B — conductance 0.35 0.35 0.4 0.4 0.45 0.4 0.35 0.35 0.35 0.35
*1 Use turbine oil Class 1 ISO VG32, if lubricated. dm3/(s · bar)
*2 The bracket can only be used for side mounting of the side ported type. b values: Critical
0.09 0.06 0.09 0.06 0.1 0.06 0.1 0.06 0.15 0.06
*3 Use caution at the max. operating pressure when using soft nylon or pressure ratio
polyurethane tubing. (For details, refer to the Web Catalog.) Cv factor 0.07 0.07 0.08 0.07 0.1 0.07 0.07 0.07 0.08 0.07

Model
Applicable tubing O.D.
Model Piping Metric size Inch size
3.2 4 6 1/8" 5/32" 1/4"
VM1m 01 F-m-mmm Side ported V V V V V V
VM1m 23 F-m-mmm Bottom ported V V — V V —

Piping direction Side ported Bottom ported Actuator

Actuator part Additional weight
Number of ports 2-port 3-port 2-port 3-port
number for actuator
VM120F-m-00 VM130F-m-00 VM122F-m-00 VM132F-m-00
Basic model — —
VM121F-m-00 VM131F-m-00 VM123F-m-00 VM133F-m-00
Mechanical operation

Polyacetal roller VM121F-m-01 VM131F-m-01 VM123F-m-01 VM133F-m-01 VM-01J 14 g

Roller lever
Hard steel roller VM121F-m-01S VM131F-m-01S VM123F-m-01S VM133F-m-01S VM-01JS 19 g
One way roller Polyacetal roller VM121F-m-02 VM131F-m-02 VM123F-m-02 VM133F-m-02 VM-02J 18 g
lever Hard steel roller VM121F-m-02S VM131F-m-02S VM123F-m-02S VM133F-m-02S VM-02JS 23 g
Straight plunger VM121F-m-05 VM131F-m-05 VM123F-m-05 VM133F-m-05 VM-05J 47 g
Polyacetal roller VM121F-m-06 VM131F-m-06 VM123F-m-06 VM133F-m-06 VM-06J 47 g
Roller plunger
Hard steel roller VM121F-m-06S VM131F-m-06S VM123F-m-06S VM133F-m-06S VM-06JS 49 g
Cross roller Polyacetal roller VM121F-m-07 VM131F-m-07 VM123F-m-07 VM133F-m-07 VM-07J 47 g
plunger Hard steel roller VM121F-m-07S VM131F-m-07S VM123F-m-07S VM133F-m-07S VM-07JS 49 g
Toggle lever VM121F-m-08 VM131F-m-08 VM123F-m-08 VM133F-m-08 VM-08J 46 g
Red VM121F-m-30R VM131F-m-30R VM123F-m-30R VM133F-m-30R VM-30JR
Push button Black VM121F-m-30B VM131F-m-30B VM123F-m-30B VM133F-m-30B VM-30JB
39 g
(Mushroom) Green VM121F-m-30G VM131F-m-30G VM123F-m-30G VM133F-m-30G VM-30JG
Yellow VM121F-m-30Y VM131F-m-30Y VM123F-m-30Y VM133F-m-30Y VM-30JY
Red VM121F-m-32R VM131F-m-32R VM123F-m-32R VM133F-m-32R VM-32JR
Push button Black VM121F-m-32B VM131F-m-32B VM123F-m-32B VM133F-m-32B VM-32JB
34 g
(Extended) Green VM121F-m-32G VM131F-m-32G VM123F-m-32G VM133F-m-32G VM-32JG
Yellow VM121F-m-32Y VM131F-m-32Y VM123F-m-32Y VM133F-m-32Y VM-32JY
Manual operation

Red VM121F-m-33R VM131F-m-33R VM123F-m-33R VM133F-m-33R VM-33JR

Push button Black VM121F-m-33B VM131F-m-33B VM123F-m-33B VM133F-m-33B VM-33JB
33 g
(Flush) Green VM121F-m-33G VM131F-m-33G VM123F-m-33G VM133F-m-33G VM-33JG
Yellow VM121F-m-33Y VM131F-m-33Y VM123F-m-33Y VM133F-m-33Y VM-33JY
Red VM121F-m-34R VM131F-m-34R VM123F-m-34R VM133F-m-34R VM-34JR
Twist selector Black VM121F-m-34B VM131F-m-34B VM123F-m-34B VM133F-m-34B VM-34JB
39 g
(2-position) Green VM121F-m-34G VM131F-m-34G VM123F-m-34G VM133F-m-34G VM-34JG
Yellow VM121F-m-34Y VM131F-m-34Y VM123F-m-34Y VM133F-m-34Y VM-34JY
Key selector (2-position) VM121F-m-36 VM131F-m-36 VM123F-m-36 VM133F-m-36 VM-36J 57 g
3-port 5-port 3-port 5-port
Red VM131F-m-35R VM151F-m-35R VM133F-m-35R VM153F-m-35R 126 g
Twist selector
Black VM131F-m-35B VM151F-m-35B VM133F-m-35B VM153F-m-35B — (Add to 2 basic
(3-position)
Green VM131F-m-35G VM151F-m-35G VM133F-m-35G VM153F-m-35G model units.)
Yellow VM131F-m-35Y VM151F-m-35Y VM133F-m-35Y VM153F-m-35Y
* It is possible to change the actuator assembly and mount to basic * T
 he selector (2-position and 3-position) knob cannot be removed or replaced.
model when an actuator part number is specified in the column. * C  olor of plunger: Gray (2-port), White (3-port)
* F or the push button (mushroom), push button (flush), push button * m  indicates the applicable tube outside diameter.
(extended) and individual fastening ring replacement, refer to page 16.
2
VM100F Series

How to Order

VM1 3 1 F 06 30 R
Bracket option
Number of ports
Nil None
2 2-port Suffix for indicator
B With bracket (included)
3 3-port Nil None
5-port With miniature * A
 pplicable only to side ported
5 (Twist selector 3-position only)
Z indicator Twist selector (3-position),
plunger (straight, roller, cross
* A
 pplicable only to roller), toggle lever type cannot
Piping direction and bottom ported be mounted. These are only for
the height of plunger panel mount type. Refer to page
0 Side Long (Basic model only) With One-touch 15 for details.
1 ported Short fitting Actuator type*1
2 Bottom Long (Basic model only) 00 Basic model
3 ported Short 01 Roller lever
Applicable tubing O.D. 02 One way roller lever Suffix for actuator*1
Metric size Inch size S
05 Straight plunger Hard steel roller
23 ø3.2 01 ø1/8" 06 Roller plunger R Red
04 ø4 03 ø5/32" 07 Cross roller plunger B Black Color of push
06 ø6 07 ø1/4" 08 Toggle lever G Green button, selector
* F
 or selecting applicable tubing O.D., refer to the 30 Push button (Mushroom) Y Yellow
“Model” on page 2. 32 Push button (Extended)
Metric size and inch size types can be visually 33 Push button (Flush)
identified by color of the release button. *1 R
 efer to the table on page 2
34 Twist selector (2-position)
Metric size: Light gray for combinations of actuator
Inch size: Orange
36 Key selector (2-position)
35 Twist selector (3-position) type and suffix.

Construction

Side ported Bottom ported

q u w y t 3(R) q u w yt 3(R)
Non-actuated (3-port only) Non-actuated (3-port only)

!4
i !0
1(P) 2(A)
e o
r !3
!1
!2 !1 i e o r !0 !3
!2
1(P) 2(A)

Actuated Actuated

1(P) 2(A)

1(P) 2(A)
Component Parts
No. Description Material Note No. Description Material Note
1 Valve PBT 8 O-ring NBR
2 Valve sheet A PBT 9 Valve NBR
3 Valve sheet B PBT 10 Spring Stainless steel
4 Valve sheet C PBT 11 Seal NBR
White 3-port 12 Cassette —
5 Plunger POM
Gray 2-port 13 Spacer Steel
6 O-ring NBR 14 Plug Brass Electroless nickel plating
7 O-ring NBR
3
 2/3-Port Mechanical Valve
with One-touch Fitting VM100F Series

Dimensions / Side Ported

Basic model Release button dimensions
VM120F-m-00 3(R) X øX
ø4
VM130F-m-00

P.T.
T.T.
(3-port only)

O.T.
(A)

Y
VM121F-m-00
VM131F-m-00 For ø3.2, ø4, ø6 For ø1/4"

(L1)

5.5
25
ø1/8", ø5/32"
L2

L3
17 2 x øD
M1 M1 Symbol (A)
2
25.4 2-port
12 10
48.8 2 x ø4.1 Mounting hole 1
(P)

3-port (A)
2

Applicable tubing Release button dimensions 12 10

Model
O.D. øD
A L1 L2 L3 M1 13
øX(X) Y (P)(R)
VM1m0F-23-00 3.2 6.7 9.5
13.5 15.5
VM1m0F-04-00 4 7.7 10.0
VM1m0F-06-00 6 9.7 12.0 14.5 14.5
7.5 32.5
VM1m0F-01-00 1/8" 6.7 9.5
13.5 15.5
VM1m0F-03-00 5/32" 7.7 10.0
VM1m0F-07-00 1/4" 10.9 — 14.5 14.5
13.5
VM1m1F-23-00 3.2 6.7 9.5
13.5 15.5 *1 0.5 MPa supply
VM1m1F-04-00 4 7.7 10.0
VM1m1F-06-00 6 9.7 12.0 14.5 14.5 F.O.F.*1 20 N
3.5 28.5
VM1m1F-01-00 1/8" 6.7 9.5 P.T. 1.5 mm
13.5 15.5
VM1m1F-03-00 5/32" 7.7 10.0 O.T. 1.5 mm
VM1m1F-07-00 1/4" 10.9 — 14.5 14.5 T.T. 3 mm

Roller lever ø10 Symbol

Polyacetal or hard steel roller
VM121F-m-01 2-port (A)
2
47.9
VM131F-m-01 3(R)
12 10
P.T.

(3-port only) 8 29.2

T.T.
O.T.

VM121F-m-01S 1
(P)
VM131F-m-01S
3-port (A)
2
(37.1)
(42.6)

12 10
13
25

(P)(R)
L2

L3

2 x øD
M1 M1
5.5

17 *1 0.5 MPa supply

25.4
F.O.F.*1 10 N
48.8 2 x ø4.1 Mounting hole P.T. 3.2 mm
O.T. 2.3 mm
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 5.5 mm

One way roller lever ø10 Symbol

Polyacetal or hard steel roller
VM121F-m-02 2-port (A)
2
48.9
VM131F-m-02 12 10
29.2
VM121F-m-02S 1
(P)
P.T.

8
T.T.
O.T.

VM131F-m-02S
6

3(R)
R1

(3-port only) 3-port (A)

2

12 10
13
(47.9)
(53.4)

(P)(R)
25
L2

L3

2 x øD
5.5

17
M1 M1 *1 0.5 MPa supply
25.4 F.O.F.*1 10 N
48.8 2 x ø4.1 Mounting hole P.T. 3.2 mm
O.T. 2.3 mm
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 5.5 mm

4
VM100F Series

Dimensions / Side Ported

Straight plunger 2 x M14 x 1 Panel mounting hole Symbol
3(R) Hexagon nut
VM121F-m-05 (3-port only) Thickness 5, 5
2-port (A)
4. 2

P.T.
ø8

T.T.
O.T.
Width across flats 17
VM131F-m-05 ø1 12 10
1
(P)

16

32
24
Max. 6 3-port (A)

(57)
2

12 10

5.5
13

25
(P)(R)
L2

L3
2 x øD

17 M1 M1 *1 0.5 MPa supply

25.4 F.O.F.*1 23 N
P.T. 2 mm
48.8 2 x ø4.1
O.T. 1.5 mm
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 3.5 mm

Roller plunger 3(R) ø10

2 x M14 x 1 Panel mounting hole Symbol
(3-port only) Hexagon nut
VM121F-m-06 Polyacetal or hard steel roller
Thickness 5, 5
2-port (A)
4 1 4. 2
VM131F-m-06 Width across flats 17 ø 12 10
VM121F-m-06S 1
(P)
P.T.

VM131F-m-06S
O.T.
T.T.

Max. 6
38

3-port (A)
16

2
24

(63)

12 10
13
(P)(R)
5.5
25
L2

L3
2 x øD

17 M1 M1 *1 0.5 MPa supply

25.4 F.O.F.*1 23 N
P.T. 2 mm
48.8 2 x ø4.1
O.T. 1.5 mm
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 3.5 mm

Cross roller plunger Symbol

ø10
VM121F-m-07 3(R) Polyacetal or hard steel roller
2-port (A)
2
2 x M14 x 1
VM131F-m-07
P.T.

(3-port only)
T.T.
O.T.

4 Hexagon nut 12 10
VM121F-m-07S Thickness 5, 1
(P)
Width across flats 17
VM131F-m-07S
3-port (A)
38
16

2
24

(63)

12 10
13
Panel mounting hole (P)(R)
5.5
25
L2

L3

5
4.
ø1
17 M1 M1 2 x øD *1 0.5 MPa supply
25.4 F.O.F.*1 23 N
P.T. 2 mm
48.8 2 x ø4.1 Max. 6
O.T. 1.5 mm
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 3.5 mm

Toggle lever
3(R) Symbol
VM121F-m-08 (3-port only) 2-port (A)
VM131F-m-08 ø5 T.T.
2 x M14 x 1
2

ON OFF 12 10
Hexagon nut 1
Thickness 5, (P)
Width across flats 17
3-port (A)
42.7

2
16

(67.7)
24

Panel mounting hole 12 10

13
4 .5 (P)(R)
ø1
5.5
25
L2

L3

17 M1 M1 2 x øD Max. 6
25.4
*1 0.5 MPa supply
48.8 2 x ø4.1
F.O.F.*1 10 N
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 60°

5
 2/3-Port Mechanical Valve
with One-touch Fitting VM100F Series

Dimensions / Side Ported

Push button (Mushroom) 3(R) Panel mounting hole
(3-port only) ø40
VM121F-m-30 (R, B, G, Y)
VM131F-m-30 (R, B, G, Y)

5
29.5

T.T.

0.
1.5

ø3
(73.2)
1.5
3
18.7
Max. 6

(43.7)
Symbol

5.5

25
L2

L3
2-port (A)
2
12 10
17 M1 M1 2 x øD 1
(P)
25.4
48.8 2 x ø4.1 Mounting hole 3-port (A)
2

12 10
13
(P)(R)

*1 0.5 MPa supply

F.O.F.*1 21 N
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 6.5 mm

Push button (Extended) 3(R) ø38 Panel mounting hole

VM121F-m-32 (R, B, G, Y) (3-port only) ø23
VM131F-m-32 (R, B, G, Y)
1.5

23.5

5
0.
T.T.

ø3
1.5

(67.2)
3
18.7

Max. 6
(43.7)
5.5

25

Symbol
L2

L3
2-port (A)
2
12 10
17 M1 M1 2 x øD
1
25.4 (P)

48.8 2 x ø4.1 Mounting hole 3-port (A)

2

12 10
13
(P)(R)

*1 0.5 MPa supply

F.O.F.*1 21 N
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 6.5 mm

Push button (Flush) 3(R) ø38 Panel mounting hole

VM121F-m-33 (R, B, G, Y) (3-port only) ø23
1.5

VM131F-m-33 (R, B, G, Y)
16.5

.5
0
T.T.

ø3
1.5
3
18.7

(60.2)
(43.7)

Max. 6
5.5

25
L2

L3

Symbol
2-port (A)
2
17 M1 M1 2 x øD
12 10
25.4 1
(P)
48.8 2 x ø4.1 Mounting hole
3-port (A)
2

12 10
13
(P)(R)

*1 0.5 MPa supply

F.O.F.*1 21 N
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 6.5 mm

6
VM100F Series

Dimensions / Side Ported

Twist selector (2-position) ON Panel mounting hole
VM121F-m-34 (R, B, G, Y)
VM131F-m-34 (R, B, G, Y)

T.T.

40

5
0.
ø3
OFF
39 Max. 6

ø38
ø24.5 Symbol
2-port (A)
2

3(R)

1.5
12 10

28
(3-port only) 1
(P)

(71.7)
1.5
3
18.7
3-port (A)
2

(43.7)
12 10
13

5.5

25
(P)(R)
L2

L3
17 M1 M1 2 x øD
25.4
*1 0.5 MPa supply
48.8 2 x ø4.1 Mounting hole
F.O.F.*1 15 N
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 90°

Key selector (2-position) ON Panel mounting hole

VM121F-m-36
VM131F-m-36
T.T.

40

5
0.
ø3
OFF
39 Max. 6

ø38

Symbol
2-port (A)
21

2
3(R) 12 10
(3-port only) 1
30.5

(P)
1.5
(95.2)

3-port (A)
2
(74.2)
1.5
3
18.7

12 10
13
(43.7)

(P)(R)
5.5

25
L2

L3

17 M1 M1 2 x øD
25.4
A key can be removed at the “on” and “off” positions. 48.8 2 x ø4.1 Mounting hole *1 0.5 MPa supply
One spare key is included. F.O.F.*1 15 N
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 90°

7
 2/3-Port Mechanical Valve
with One-touch Fitting VM100F Series

Dimensions / Side Ported

Twist selector (3-position) ON Panel mounting hole
VM131F-m-35 (R, B, G, Y)

45°
VM151F-m-35 (R, B, G, Y)

T.T.
OFF

5
0.
ø3
45°
ON
ø38 Max. 6
ø24.5
Symbol
3-port (A)(A)
1.5
28

2 2
12
12
1.5

1
3
(78.5)

(P)

5-port
50.5

(A) (A)
2 2
12
12
L2

L3
3 1 3
(R) (P) (R)

R port 17 M1 M1 3 x øD
(5-port only) 37.2 48.8
*1 0.5 MPa supply
47.8
F.O.F.*1 20 N
øD, dimensions L2, L3 and M1 are the same as basic models. T.T. 45°

With bracket M4 x 25
Bracket mounting bolt
VM120F-m-mmm-B
VM130F-m-mmm-B
(8.5)

VM121F-m-mmm-B
13.2

VM131F-m-mmm-B
8

45
55 2 x ø4.4 Mounting hole
∗ For mounting bolt, a hexagon socket
head cap screw is recommended.
25

VM1-B
Component parts Qty.
35.6
1.6
5.5
10.5

Bracket 1
Hexagon socket head cap screw M4 x 25 2
Hexagon nut M4 2

8
VM100F Series

Dimensions / Bottom Ported

Basic model 3(R) Release button dimensions
VM122F-m-00 (3-port only) X

P.T.
ø4

T.T.
O.T.
(A)
VM132F-m-00

Y
VM123F-m-00
VM133F-m-00

(L1)
38.5
Symbol (A)
2
2-port

19
M1
12 10
1
17 25.4 (P)

40 2 x ø4.1 Mounting hole 3-port (A)

2
14 12 10
2 x øD 8.5 13
(P)(R)

With miniature indicator

Pneumatic indicator
7
ø12
Applicable tubing Release button dimensions
Model
O.D. øD
A L1 M1
X Y
With miniature

28
VM1m2F-23-00 3.2 6.7 9.5
indicator VM1m2F-04-00 4 7.7 10.0
7.5 46
VM1m2F-01-00 1/8" 6.7 9.5
VM1m2F-03-00 5/32" 7.7 10.0 *1 0.5 MPa supply
13.5
VM1m3F-23-00 3.2 6.7 9.5 F.O.F.*1 20 N
VM1m3F-04-00 4 7.7 10.0 P.T. 1.5 mm
3.5 42
VM1m3F-01-00 1/8" 6.7 9.5 O.T. 1.5 mm
VM1m3F-03-00 5/32" 7.7 10.0 T.T. 3 mm

Roller lever ø10 Symbol

Polyacetal or hard steel roller 44.5
VM123F-m-01 2-port (A)
2
P.T.

8 29.2
T.T.

VM133F-m-01
O.T.

3(R) 12 10
VM123F-m-01S (3-port only) 1
(P)
VM133F-m-01S
(37.1)

3-port (A)
2
(56.1)

12 10
38.5

13
(P)(R)
19
M1

17 25.4
42 2 x ø4.1 Mounting hole

14
2 x øD 8.5
*1 0.5 MPa supply
F.O.F.*1 10 N
P.T. 3.2 mm
O.T. 2.3 mm
øD and dimension M1 are the same as basic models. T.T. 5.5 mm

One way roller lever ø10 45.5 Symbol

VM123F-m-02 Polyacetal or hard steel roller 29.2 2-port (A)
2
P.T.

8
T.T.

VM133F-m-02
O.T.
6

3(R) 10
R1

12
VM123F-m-02S (3-port only) 1
(P)
VM133F-m-02S
3-port (A)
(47.9)

2
(66.9)

12 10
13
(P)(R)
38.5
19
M1

17 25.4
42 2 x ø4.1 Mounting hole

14
*1 0.5 MPa supply
2 x øD 8.5
F.O.F.*1 10 N
P.T. 3.2 mm
O.T. 2.3 mm
øD and dimension M1 are the same as basic models. T.T. 5.5 mm
9
 2/3-Port Mechanical Valve
with One-touch Fitting VM100F Series

Dimensions / Bottom Ported

Straight plunger 2 x M14 x 1
Symbol
Hexagon nut
VM123F-m-05 Thickness 5, 2-port (A)
2

P.T.
ø8

T.T.
O.T.
VM133F-m-05 Width across flats 17
3(R) 12 10
1
(3-port only) (P)

16

32
24
3-port (A)
2

(70.5)
12 10
13

38.5
(P)(R)

19
M1
17 25.4
42 2 x ø4.1
Panel mounting hole
14 5
4.
2 x øD 8.5 ø1
*1 0.5 MPa supply
F.O.F.*1 23 N
P.T. 2 mm
Max. 6
O.T. 1.5 mm
øD and dimension M1 are the same as basic models. T.T. 3.5 mm

Roller plunger 2 x M14 x 1

Symbol
Hexagon nut
VM123F-m-06 ø10 Thickness 5, 2-port (A)
4 Polyacetal or hard steel roller 2
VM133F-m-06 3(R) Width across flats 17
(3-port only) 12 10
VM123F-m-06S 1
P.T.

(P)
O.T.
T.T.

VM133F-m-06S
38
16

3-port (A)
24

2
(76.5)

12 10
13
(P)(R)
38.5
19
M1

17 25.4
42 2 x ø4.1
Panel mounting hole
14
5
4.
2 x øD 8.5 ø1
*1 0.5 MPa supply
F.O.F.*1 23 N
P.T. 2 mm
Max. 6
O.T. 1.5 mm
øD and dimension M1 are the same as basic models. T.T. 3.5 mm

Cross roller plunger ø10 Symbol

3(R) Polyacetal or hard steel roller
VM123F-m-07 2 x M14 x 1 2-port (A)
2
P.T.

(3-port only) 4
T.T.
O.T.

VM133F-m-07 Hexagon nut

Thickness 5, 12 10
VM123F-m-07S Width across flats 17 1
(P)
VM133F-m-07S
38
16

3-port (A)
24

2
(76.5)

12 10
13
(P)(R)
38.5
19
M1

17 25.4
42 2 x ø4.1
Panel mounting hole
14 5
4.
2 x øD 8.5 ø1
*1 0.5 MPa supply
F.O.F.*1 23 N
P.T. 2 mm
Max. 6
O.T. 1.5 mm
øD and dimension M1 are the same as basic models. T.T. 3.5 mm

10
VM100F Series

Dimensions / Bottom Ported

Toggle lever ø5 T.T. 2 x M14 x 1 Symbol
VM123F-m-08 ON OFF Hexagon nut 2-port (A)
2
Thickness 5,
VM133F-m-08 3(R) Width across flats 17 12 10
(3-port only) 1

42.7
(P)

16
24
3-port (A)
2

81.2
12 10
13

38.5
(P)(R)

19
M1
17 25.4
42 2 x ø4.1 Panel mounting hole
14 5
4.
2 x øD 8.5 ø1

*1 0.5 MPa supply

Max. 6 F.O.F.*1 10 N
øD and dimension M1 are the same as basic models. T.T. 60°

Push button (Mushroom) ø40 Symbol

VM123F-m-30 (R, B, G, Y) 2-port (A)
2
VM133F-m-30 (R, B, G, Y) 29.5 12 10

T.T.
1.5

1
(P)
1.5

3-port (A)
3
18.7

(86.7)
2

12 10
(57.2)

3(R)
13
(3-port only) (P)(R)
38.5
19
M1

17 25.4 2 x ø4.1
40 Mounting hole
14 Panel mounting hole
8.5
2 x øD
.5
0
ø3

*1 0.5 MPa supply

Max. 6 F.O.F.*1 21 N
øD and dimension M1 are the same as basic models. T.T. 6.5 mm

Push button (Extended) ø38 Symbol

VM123F-m-32 (R, B, G, Y) ø23 2-port (A)
T.T.

2
VM133F-m-32 (R, B, G, Y) 12 10
1
1.5

23.5

(P)

3-port (A)
1.5
3
18.7

2
(80.7)

12 10
3(R)
(57.2)

13
(3-port only) (P)(R)
38.5
19
M1

17 25.4 2 x ø4.1
40 Mounting hole
14 Panel mounting hole
8.5
2 x øD
.5
0
ø3

*1 0.5 MPa supply

Max. 6 F.O.F.*1 21 N
øD and dimension M1 are the same as basic models. T.T. 6.5 mm
11
 2/3-Port Mechanical Valve
with One-touch Fitting VM100F Series

Dimensions / Bottom Ported

Push button (Flush) ø38 Panel mounting hole
VM123F-m-33 (R, B, G, Y) ø23

T.T.
1.5
VM133F-m-33 (R, B, G, Y)

16.5

5
0.
ø3
1.5
3
18.7

(73.7)
Max. 6

(57.2)
3(R)

38.5
(3-port only)

19
Symbol

M1
2-port (A)
2
17 25.4
12 10
40 2 x ø4.1 Mounting hole 1
(P)
14
8.5
3-port (A)
2
2 x øD 12 10
13
(P)(R)

*1 0.5 MPa supply

F.O.F.*1 21 N
øD and dimension M1 are the same as basic models. T.T. 6.5 mm

Twist selector (2-position) ON Panel mounting hole

VM123F-m-34 (R, B, G, Y)
VM133F-m-34 (R, B, G, Y)
T.T.

40

5
0.
ø3
OFF
39
Max. 6
ø38
ø24.5
Symbol
2-port (A)
2
3(R)
1.5

28

(3-port only) 12 10
1
(P)
1.5
3
18.7

(85.2)

3-port (A)
2
(57.2)

12 10
38.5

13
(P)(R)
19
M1

17 25.4
40 2 x ø4.1 Mounting hole

14
8.5
2 x øD

*1 0.5 MPa supply

F.O.F.*1 15 N
øD and dimension M1 are the same as basic models. T.T. 90°

12
VM100F Series

Dimensions / Bottom Ported

Key selector (2-position) ON Panel mounting hole
VM123F-m-36
VM133F-m-36

T.T.

40

5
0.
ø3
OFF
39
Max. 6
ø38

Symbol

21
2-port (A)
2
12 10
1

30.5
1.5
3(R) (P)
(3-port only)
(108.7)
3-port (A)

1.5
2

3
18.7

(87.7)
12 10
13

(57.2)
(P)(R)

38.5
19
M1
17 25.4
40 2 x ø4.1 Mounting hole

14
8.5
2 x øD

A key can be removed at the “on” and “off” positions. *1 0.5 MPa supply
One spare key is included. F.O.F.*1 15 N
øD and dimension M1 are the same as basic models. T.T. 90°

Twist selector (3-position) ON Panel mounting hole

VM133F-m-35 (R, B, G, Y)
45°

VM153F-m-35 (R, B, G, Y)
T.T.

OFF
5
0.
ø3
45°

ON
ø38 Max. 6
ø24.5

Symbol
1.5

3-port
28

(A)(A)
2 2
12
12
1.5
3

1
(P)
(92)

5-port
64

(A) (A)
2 2
12
12
3 1 3
M1

(R) (P) (R)

3(R) 37.2
14
(5-port only) 47.8
8.5

3 x øD
17

*1 0.5 MPa supply

F.O.F.*1 20 N
øD and dimension M1 are the same as basic models. T.T. 45°

13
 VM100F Series
Specific Product Precautions 1
Be sure to read this before handling the products. Refer to the back cover for safety instructions.
For 3/4/5-port solenoid valve precautions, refer to the “Handling Precautions for SMC Products”
and the “Operation Manual” on the SMC website: http://www.smcworld.com

Definition of Symbol Mounting

The abbreviations F.O.F. / P.T. / O.T. / T.T. shown in this catalog
are detailed below.
Warning
1. W hen installing the mechanical operation type
mechanical valves, adjust the position so that the
F.O.F.
P.T.

P.T.
valves do not operate over the operating limit range.
T.T.

T.T.
O.T.

Operating over the limit could damage the mechanical valve or

actuator, and lead to equipment malfunction.

O.T.
2. P.T. depends on pressure or differences between the
individual product specifications. In order to ensure
that the valve opens, keep the operating stroke
value for the mechanical operation type within the
¡F.O.F. <Full Operating Force> range specified by the following formula.
Required force to total travel position Operating stroke range = (P.T. + 0.5 x O.T.) to (P.T. + O.T. – 0.1)
¡P.T. <Pre-travel> Operating Stroke Range
From free position to initial valve operating position
Series Actuator type Operating stroke [mm]
¡O.T. <Over Travel>
Basic model 2.2 to 2.9
From initial valve operating position to total travel position
Roller lever 4.3 to 5.4
¡T.T. <Total Travel> One way roller lever 4.3 to 5.4
VM100F
From free position to total travel position Straight plunger 2.7 to 3.4
Roller plunger 2.7 to 3.4
Cross roller plunger 2.7 to 3.4
Design
For straight and roller plunger types, there is a groove indicating

Warning P.T. and T.T. for stroke adjustment.

1. T his product cannot be used for applications in

P.T.

T.T.
O.T.
which the pressure must be sealed.
P.T.

T.T.
O.T.

Since the VM100F are poppet type valves, fluid flows backward
when the pressure on port 2 (A) rises.
Since the valves are subject to air leakage, they cannot be
used for applications such as holding pressure (including
vacuum).

2. N
 ot suitable for use as an emergency shutoff valve
This mechanical valve is not designed for safety applications
such as an emergency shutoff valve. If the valves are used for 3. Do not make any alterations to the valve body, such
the mentioned applications, additional safety measures should as enlarging the body mounting holes.
be adopted. As doing so could lead to unexpected abnormal conditions
such as air leakage.

4. Refer to the Fittings and Tubing Precautions in the

catalog available on the SMC website for handling
One-touch fittings.

14
 VM100F Series
Specific Product Precautions 2
Be sure to read this before handling the products. Refer to the back cover for safety instructions.
For 3/4/5-port solenoid valve precautions, refer to the “Handling Precautions for SMC Products”
and the “Operation Manual” on the SMC website: http://www.smcworld.com

Operation

Warning
1. O
 perate the manual operation type mechanical valves (such as 4. D o not use the roller lever type in the direction
push button, twist selector and toggle lever types) with your finger. shown in the drawings below.
The use of equipment such as a cylinder, cam or hammer, can result in the Select the roller plunger type when the dog goes over the
actuator and the valve being damaged. Do not operate over the operation actuator.
limit. If excessive operation force is applied over total travel position,
[Not acceptable] [Acceptable]
actuator part can get deformed and lead to equipment malfunction.
2. W
 hen operating the mechanical operation type mechanical
valves, select the angle and the maximum speed limit of cam
and dog so that valves do not operate over the following
maximum values.
If operated over the maximum values, impact force from cam and dog will be
applied to the actuator, leading to damage of the actuator or the valve itself.
Cam and Dog Caution
Angle limit of Max. speed limit of
Series Actuator type
cam and dog cam and dog [m/s] 1. If the operating condition is maintained for long
30° 0.7 periods of time, it may take some time for the valve
Roller lever
45° 0.3 to restart due to the adherence of the seals and
30° 0.7 there might be a delay for recovery.
One way roller lever
VM100F 45° 0.3
Straight plunger — 0.2 Air Supply
Roller plunger 30° 0.3
Cross roller plunger 30° 0.3
Warning
[Not acceptable] [Acceptable] 1. O
 perable fluid is either air or inert gas only.
Over 45° (Abrupt angle) 45° or less It cannot be used for corrosive gas and fluid.

Caution
1. G
 rease is used for the inside of the valves.
Grease may enter into the outlet port of the valve.

[Not acceptable] [Acceptable] 2. When using vacuum pressure for the VM100F, supply
Max. travel
vacuum pressure to P port.
Max. travel

Operating Environment

Over travel. Exces-

sive force is applied
Sufficient travel. The
actuator can reach
Warning
due to the maxi- the total travel posi- 1. D
 o not operate it in an area in which fluids such as oil,
mum travel position tion without excessive
being exceeded. force being applied. coolant, or water splash on it or dust comes in contact with it.
Because it does not have a waterproof or dustproof construction, fluids or
Cam and Dog Material dust could enter the valve, leading to malfunction. Therefore, take
Roller material Cam and dog material Surface finish of measures such as providing a protective cover to prevent direct exposure.
cam and dog
Polyacetal Steel 6.3 z or less
Hard steel Steel, Resin 25 z or less
2. Do not expose the product to direct sunlight for an
extended period of time.
3. M
 ount the plunger (straight, roller, cross roller) and
toggle lever type using the panel mount. Maintenance
Do not use the mounting hole for side mounting or bracket mounting.
If excessive torque is applied to the valve, it can cause breakage. Warning
1. P
 erform inspections on a regular basis as necessary,
Panel mount
such as at the beginning of an operation, to make
sure that the mechanical valve operates properly.
2. Do not disassemble, modify or repair the product.
Mounting hole This may lead to malfunction of equipment, injury and equipment damage.
Please contact SMC for repairs and maintenance of the product.
15
 VM100F Series
Specific Product Precautions 3
Be sure to read this before handling the products. Refer to the back cover for safety instructions.
For 3/4/5-port solenoid valve precautions, refer to the “Handling Precautions for SMC Products”
and the “Operation Manual” on the SMC website: http://www.smcworld.com

Change of the Actuator and Button Change of the Button

Caution Caution
Refer to the procedure below for the mounting and removal of the Mushroom push button Extended/Flush push button
actuator. Align the protruding portion of the
Align the protruding portion of
button with the recessed portion
1. Installation the button with the recessed
Installation of the body and push in. (Use the
portion of the body and push
Mount the actuator onto the basic model. Insert the clip into mark on the button as a reference
in.
to align the protruding part.)
the groove of the body to fix them together. Push the clip to the
Remove the fastening ring and
end using a flat blade screwdriver. After the clip is inserted, Placing your finger under the
insert the tip of a small flat
check if the clip is fixed correctly. Perform the change Removal collar of the button on the side
blade screwdr iver into the
of the mark, tilt it upward.
according to the procedure indicated in the Operation Manual. groove of the button to pry it up.

Mark Extended push button

Plunger type
Roller lever type Mushroom Flush push button
Push button type push
Groove
button Groove
Protrusion Protrusion

Recessed portion
Fastening ring

How to remove a mushroom push button

How to remove at panel mount
Support it with your finger.
Clip
Mark Use your thumb to pull
Basic model of the the button downward.
Insert the clip to the
mechanical valve
end correctly using a
flat blade screwdriver.

2. Removal
Insert the flat blade screwdriver into the groove on the side of
the actuator to remove the clip. Do not reuse the removed clip.

Removing the valve as a unit

Mark
Use your thumb to pull
the button downward.

Insert the flat blade screwdriver into the groove.

Change of the Button Replacement Parts

1. U
 se the part numbers listed below to order individual mushroom,
Caution extended, or flush push buttons.
Follow the procedure below to mount and remove the button for Color Mushroom push button Extended push button Flush push button
changing the type and color. One specified button is set when the Red 3402186R 3402187R 3402188R
product is shipped. Black 3402186B 3402187B 3402188B
Green 3402186G 3402187G 3402188G
Yellow 3402186Y 3402187Y 3402188Y

2. Use the part number below to order individual fastening ring.

Fastening ring: 3402184
16
 These safety instructions are intended to prevent hazardous situations and/or
Safety Instructions equipment damage. These instructions indicate the level of potential hazard with
the labels of “Caution,” “Warning” or “Danger.” They are all important notes for
safety and must be followed in addition to International Standards (ISO/IEC)∗1),
and other safety regulations.
∗1) ISO 4414: Pneumatic fluid power – General rules relating to systems.
Caution indicates a hazard with a low level of risk which,
Caution: if not avoided, could result in minor or moderate injury.
ISO 4413: Hydraulic fluid power – General rules relating to systems.
IEC 60204-1: Safety of machinery – Electrical equipment of machines.
(Part 1: General requirements)
Warning indicates a hazard with a medium level of risk which,
Warning: if not avoided, could result in death or serious injury.
ISO 10218-1: Manipulating industrial robots – Safety.
etc.
Danger indicates a hazard with a high level of risk which,
Danger : if not avoided, will result in death or serious injury.

Warning Caution
1. The compatibility of the product is the responsibility of the 1. The product is provided for use in manufacturing industries.
person who designs the equipment or decides its The product herein described is basically provided for peaceful use in
specifications. manufacturing industries.
Since the product specified here is used under various operating conditions, If considering using the product in other industries, consult SMC beforehand
its compatibility with specific equipment must be decided by the person who and exchange specifications or a contract if necessary.
designs the equipment or decides its specifications based on necessary If anything is unclear, contact your nearest sales branch.
analysis and test results. The expected performance and safety assurance
of the equipment will be the responsibility of the person who has determined Limited warranty and Disclaimer/
its compatibility with the product. This person should also continuously
review all specifications of the product referring to its latest catalog Compliance Requirements
information, with a view to giving due consideration to any possibility of The product used is subject to the following “Limited warranty and Disclaimer” and
equipment failure when configuring the equipment. “Compliance Requirements”.
Read and accept them before using the product.
2. Only personnel with appropriate training should operate
machinery and equipment. Limited warranty and Disclaimer
The product specified here may become unsafe if handled incorrectly. The
assembly, operation and maintenance of machines or equipment including
1. The warranty period of the product is 1 year in service or 1.5 years after
our products must be performed by an operator who is appropriately trained
the product is delivered, whichever is first.∗2)
and experienced. Also, the product may have specified durability, running distance or
replacement parts. Please consult your nearest sales branch.
3. Do not service or attempt to remove product and machinery/ 2. For any failure or damage reported within the warranty period which is clearly our
equipment until safety is confirmed. responsibility, a replacement product or necessary parts will be provided.
1. The inspection and maintenance of machinery/equipment should only be This limited warranty applies only to our product independently, and not to any
performed after measures to prevent falling or runaway of the driven other damage incurred due to the failure of the product.
objects have been confirmed.
3. Prior to using SMC products, please read and understand the warranty terms
2. When the product is to be removed, confirm that the safety measures as and disclaimers noted in the specified catalog for the particular products.
mentioned above are implemented and the power from any appropriate
∗2) Vacuum pads are excluded from this 1 year warranty.
source is cut, and read and understand the specific product precautions
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
of all relevant products carefully. Also, even within the warranty period, the wear of a product due to the use of the vacuum pad
3. Before machinery/equipment is restarted, take measures to prevent or failure due to the deterioration of rubber material are not covered by the limited warranty.
unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of
Compliance Requirements
safety measures if the product is to be used in any of the 1. The use of SMC products with production equipment for the manufacture of
following conditions. weapons of mass destruction (WMD) or any other weapon is strictly prohibited.
1. Conditions and environments outside of the given specifications, or use 2. The exports of SMC products or technology from one country to another are
outdoors or in a place exposed to direct sunlight. governed by the relevant security laws and regulations of the countries involved
2. Installation on equipment in conjunction with atomic energy, railways, air in the transaction. Prior to the shipment of a SMC product to another country,
navigation, space, shipping, vehicles, military, medical treatment, assure that all local rules governing that export are known and followed.
combustion and recreation, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press
applications, safety equipment or other applications unsuitable for the Caution
standard specifications described in the product catalog.
SMC products are not intended for use as instruments for legal
3. An application which could have negative effects on people, property, or metrology.
animals requiring special safety analysis. Measurement instruments that SMC manufactures or sells have not been
4. Use in an interlock circuit, which requires the provision of double interlock qualified by type approval tests relevant to the metrology (measurement) laws
for possible failure by using a mechanical protective function, and of each country. Therefore, SMC products cannot be used for business or
periodical checks to confirm proper operation. certification ordained by the metrology (measurement) laws of each country.

Safety Instructions Be sure to read the “Handling Precautions for SMC Products” (M-E03-3) and “Operation Manual” before use.